Electrosmotic mobility and conductivity in columns for capillary electrochromatography

Numerical Modeling of Electroosmotic Push-Pull Perfusion and Assessment of Its Application to Quantitative Determination of Enzymatic Activity in the Extracellular Space of Mammalian Tissue

Many sampling methods have been developed to measure the extracellular concentrations of solutes in the extracellular space of mammalian tissue, e.g., brain. However, few have been used to quantitatively study the various processes, such as enzymatic degradation, that determines the fate of these solutes. For a method to be useful in this pursuit, it must be able to (1) perfuse tissue and collect the perfusate for quantitative analysis of the solutes introduced and reaction products produced, (2) control the average residence time of the active solutes, and (3) have the appropriate spatial resolution for the process of interest. Our lab previously developed a perfusion technique based on electroosmosis (EO), called EO push-pull perfusion (EOPPP), that is in principle suitable to meet these needs. However, much like the case for other sampling methods that came before, there are parameters that are needed for quantitative interpretation of data but that cannot be measured easily (or at all). In this paper, we present a robust finite element model that provides a deep understanding of fluid dynamics and mass transport in the EOPPP method, assesses the general applicability of EOPPP to studying enzyme activity in the ECS, and grants a simple approach to data treatment and interpretation to obtain, for example, Vmax and Km for an enzymatic reaction in the extracellular space of the tissue. This model is a valuable tool in optimizing and planning experiments without the need for costly experiments.

Inherent peak compression of charged analytes in electrochromatography

This work resolves peak compression of charged analytes in CEC with strong cation-exchange stationary phase particles. By combining electrochromatographic peak shape analysis with the results of numerical simulations and confocal laser scanning microscopy in the packed capillaries, we identify electrical field-induced concentration polarization as the key physical phenomenon responsible for the inherent existence of local electrical field gradients on the scale of an individual support particle. Consequently, positive and negative field gradients exist between and inside the particles along the whole packing. Their intensity depends on the particles cation-selectivity (governed by the particles volume charge density and the mobile phase ionic strength) and the applied field strength. The interplay of these local field gradients with the analytes retention (intraparticle adsorption) determines whether fronting, tailing, or spiked analyte peaks are observed, and it provides a mechanism by which strongly retained analytes can be eluted over long distances with little zone dispersion. Our analysis explains the "anomalous" peak compression effects with strong cation-exchange particles, which have been reported more than a decade ago (Smith, N. W., Evans, M. B., Chromatographia 1995, 41, 197-203) and since then remained largely unresolved.

Determination of zeta-potential and tortuosity in rat organotypic hippocampal cultures from electroosmotic velocity measurements under feedback control

Extracellular translational motion in the brain is generally considered to be governed by diffusion and tortuosity. However, the brain as a whole has a significant zeta-potential, thus translational motion is also governed by electrokinetic effects under a naturally occurring or applied electric field. We have previously measured zeta-potential and tortuosity in intact brain tissue; however, the method was tedious. In this work, we use a four-electrode potentiostat to control the potential difference between two microreference electrodes in the tissue, creating a constant electric field. Additionally, some alterations have been made to simplify our previous procedure. The method entails simultaneously injecting two 70 kDa dextran conjugated fluorophores into rat organotypic hippocampal cultures and observing their mobility using fluorescence microscopy. We further present two methods of data analysis: regression and two-probe analysis. Statistical comparisons are made between the previous and current methods as well as between the two data analysis methods. In comparison to the previous method, the current, simpler method with data analysis by regression gives statistically indistinguishable mean values of zeta-potential and tortuosity, with a similar variability for zeta-potential, -21.3 +/- 2.8 mV, and a larger variability for the tortuosity, 1.98 +/- 0.12. On the other hand, we find that the current method combined with the two-probe analysis produces accurate and more precise results, with a zeta-potential of -22.8 +/- 0.8 mV and a tortuosity of 2.24 +/- 0.10.

CEC separation of peptides using a poly(hexyl acrylate-co-1,4-butanediol diacrylate-co-[2-(acryloyloxy)ethyl]trimethyl ammonium chloride) monolithic column

A polyacrylate-based monolithic column bearing cationic functionalities and designed for capillary electrochromatography (CEC) has been prepared via photopolymerization of a mixture of hexyl acrylate, butanediol diacrylate, 2-(acryloyloxy) ethyltrimethyl ammonium chloride (monomers), azobisisobutyronitrile (photoinitiator), acetonitrile, phosphate buffer, and ethanol (porogens). The polymerization process was initiated with UV light at 360 nm. The column performance was evaluated via the separations of alkylbenzenes, substituted anilines, basic drugs, peptides, and a protein digest. The separation of complex peptide mixtures was then studied since such separations constitute a promising application of capillary electrochromatography. In particular, the effects of mobile phase composition, including ionic strength of the buffer solution and the percentage of acetonitrile on the retention factor, the column efficiency, and the resolution were determined. The separations were affected by both interaction of the peptides with the stationary phase and their own electrophoretic mobility. Excellent separations with column efficiencies of up to 160 000 plates/m were achieved for both a mixture of ten well-defined peptides and a tryptic digest of cytochrome c. The fractions of eluent containing peptides of the digest separated in the monolithic column were collected and characterized using matrix-assisted laser desorption ionization mass spectrometry.

Determination of zeta-potential in rat organotypic hippocampal cultures

zeta-potentials of entities such as cells and synaptosomes have been determined, but zeta of brain tissue has never been measured. Electroosmotic flow, and the resulting transport of neuroactive substances, would result from naturally occurring and experimentally or clinically induced electric fields if zeta is significant. We have developed a simple method for determining zeta in tissue. An electric field applied across a rat organotypic hippocampal slice culture (OHSC) drives fluorescent molecules through the tissue by both electroosmotic flow and electrophoresis. Fluorescence microscopy is used to determine each molecule's velocity. Independently, capillary electrophoresis is used to measure the molecules' electrophoretic mobilities. The experiment yields zeta-potential and average tissue tortuosity. The zeta-potential of OHSCs is -22 +/- 2 mV, and the average tortuosity is 1.83 +/- 0.06. In a refined experiment, zeta-potential is measured in various subregions. The zeta-potentials of the CA1 stratum pyramidale, CA3 stratum pyramidal, and dentate gyrus are -25.1 +/- 1.6 mV, -20.3 +/- 1.7 mV, and -25.4 +/- 1.0 mV, respectively. Simple dimensional arguments show that electroosmotic flow is potentially as important as diffusion in molecular transport.

Simultaneous analysis of basic, acidic and neutral compounds on an endcapped octadecylsilane silica-based monolith by pressure-assisted capillary electrochromatography

This simultaneous separation of basic, acidic and neutral analytes by pressure-assisted CEC (pCEC) using a hybrid (tetramethoxysilane and methyltrimethoxysilane) silica-based monolith, chemically modified with octadecyldimethylchlorosilane followed by endcapping with hexamethyldisilazane is described. The endcapping resulted in near Gaussian peaks for highly basic analytes such as nortriptyline without a significant loss in the EOF. The migration behaviour of analytes on this phase could be rationalised based on hydrophobicity, electrophoretic mobility and ion-exchange interactions. The high porosity of the monolith allowed manipulation of the linear velocity of mobile phases by the addition of varying amounts of pressure at the inlet to reduce analysis times and overcome the reversed migration of anionic species towards the detection window in cathodic EOF mode. The concomitant programmed application of pressure (2-4 bar) and voltage (27 kV) facilitated the simultaneous separation of four cationic, four neutral and two anionic compounds in 6 min with efficiencies ranging from 41 000 to 94 000, 57 000 to 77 000 and 180 000 to 210 000 theoretical plates/metre, respectively. The % RSD values of migration times and efficiencies in pCEC mode were less than 3.6 and 7.9%, respectively (n = 5).

Theory and practical understanding of the migration behavior of proteins and peptides in CE and related techniques

CEC is defined as an analytical method, where the analytes are separated on a chromatographic column in the presence of an applied voltage. The separation of charged analytes in CEC is complex, since chromatographic interaction, electroosmosis and electrophoresis contribute to the experimentally observed behavior. The putative contribution of effects such as surface electrodiffusion has been suggested. A sound theoretical treatment incorporating all effects is currently not available. The question of whether the different effects contribute in an independent or an interdependent manner is still under discussion. In this contribution, the state-of-the-art in the theoretical description of the individual contributions as well as models for the retention behavior and in particular possible dimensionless 'retention factors' is discussed, together with the experimental database for the separation of charged analytes, in particular proteins and peptides, by CEC and related techniques.

Fluid dynamics in capillary and chip electrochromatography

This review is concerned with the phenomenological fluid dynamics in capillary and chip electrochromatography (EC) using high-surface-area random porous media as stationary phases. Specifically, the pore space morphology of packed beds and monoliths is analyzed with respect to the nonuniformity of local and macroscopic EOF, as well as the achievable separation efficiency. It is first pointed out that the pore-level velocity profile of EOF through packed beds and monoliths is generally nonuniform. This contrasts with the plug-like EOF profile in a single homogeneous channel and is caused by a nonuniform distribution of the local electrical field strength in porous media due to the continuously converging and diverging pores. Wall effects of geometrical and electrokinetic nature form another origin for EOF nonuniformities in packed beds which are caused by packing hard particles against a hard wall with different zeta potential. The influence of the resulting, systematic porosity fluctuations close to the confining wall over a distance of a few particle diameters becomes aggravated at low column-to-particle diameter ratio. Due to the hierarchical structure of the pore space in packed beds and silica-based monoliths which are characterized by discrete intraparticle (intraskeleton) mesoporous and interparticle (interskeleton) macroporous spatial domains, charge-selective transport prevails within the porous particles and the monolith skeleton under most general conditions. It forms the basis for electrical field-induced concentration polarization (CP). Simultaneously, a finite and -- depending on morphology -- often significant perfusive EOF is realized in these hierarchically structured materials. The data collected in this review show that the existence of CP and its relative intensity compared to perfusive EOF form fundamental ingredients which tune the fluid dynamics in EC employing monoliths and packed beds as stationary phases. This addresses the (electro)hydrodynamics, associated hydrodynamic dispersion, as well as the migration and retention of charged analytes.

Capillary electrochromatography with monolithic silica columns. V. Study of the electrochromatographic behaviors of polar compounds on monolithic silica having surface bound cyano functionalities

In this report, a novel polar monolithic capillary column is described for normal phase CEC (NP-CEC) of representative polar compounds including mono- and oligosaccharides, peptides, and basic drugs. The polar monolithic column, which was described in detail in the preceding paper, consisted of silica-based monolith bonded with 1H-imidazole-4,5-dicarbonitrile (IDCN) and is denoted as 2CN-OH-Monolith. Various retention parameters for neutral polar solutes (e.g., mono- and oligosaccharides) and charged polar solutes (e.g., peptides and basic drugs) were evaluated over a wide-range of elution conditions. These retention parameters yielded quantitative assessment for the polar interactions between the model solutes and the stationary phase under investigation as well as the effect of electromigration of charged solutes on their overall migration in NP-CEC. Furthermore, this investigation demonstrated that despite the possibility of achieving isocratic separation in NP-CEC for widely differing polar species, multistep-gradient elution in NP-CEC is preferred to bring about the rapid separation of a large number of polar species in a single run.

Pore size characterization of monolith for electrochromatography via atomic force microscopy studies in air and liquid phase

This paper investigates the use of scanning electron microscopy (SEM) and atomic force microscopy (AFM) for the characterization of monoliths used in capillary electrochromatography (CEC) while focusing on the nature of the information available from both techniques. SEM imaging revealed a compact structure of non-porous micrometer sized particles homogeneously agglomerated. With a simple AFM methodology, we found by direct observation that the same material exhibits mesopores in the nanometer range while SEM showed non-porous surfaces. These results obtained by AFM clearly showed that micrometer sized particles shrank and micrometer sized pores increased in the monolith when wetted. Thus, AFM was capable of demonstrating the morphological differences between wet and dried monolithic materials that are not possible by other imaging methods at micrometer resolution.

Selection of two reliable parameters to evaluate the impact of the mobile-phase composition on capillary electrochromatography performance with monolithic and particle-packed capillary columns

Different models have been described in the literature to evaluate the total porosity of CEC columns: gravimetric, flow as well as conductivity-based methods. In this study, these models have been compared for two kinds of CEC columns: two mixed-mode silica particle stationary phases and different monolithic columns (acrylate or polystyrene divinylbenzene-based). The total porosities measured from the conductivity-based methods were lower than the total column porosities obtained by gravimetric or flow methods for all the investigated columns while the wide distribution of observed values shows that conductivity-based methods discriminate columns more efficiently with very different properties. We propose a conductivity-based method taking into account the actual length proposed by Horvath, to evaluate what we call an "actual electrokinetic" porosity (AEP). This parameter, based on electrokinetic theory only, affords the most consistent evaluation of porosity under experimental CEC conditions for the packed- and acrylate-based monolithic columns. To illustrate the potential of AEP and actual EOF for the estimation of the performances of a CEC system (stationary and mobile phases) we studied the influence of the mobile-phase composition on these parameters for CEC separations with an ammonium embedded packed stationary phase. The AEP and the actual electroosmotic mobility should allow a better understanding of the perfusive EOF and stationary-phase wettability. For neutral compounds (substituted phenols), AEP evaluation allowed us to predict the mobile-phase conditions able to enhance the efficiency while both AEP and actual EOF had to be considered in the case of peptide analysis.

Capillary electrochromatography with monolithic stationary phases. 4. Preparation of neutral stearyl-acrylate monoliths and their evaluation in capillary electrochromatography of neutral and charged small species as well as peptides and proteins

A neutral, nonpolar monolithic capillary column having a relatively strong electroosmotic flow (EOF) yet free of electrostatic interactions with charged solutes was developed for the reversed-phase capillary electrochromatography (RP-CEC) of neutral and charged species including peptides and proteins. The neutral nonpolar monolith is based on the in situ polymerization of pentaerythritol diacrylate monostearate (PEDAS) in a ternary porogenic solvent composed of cyclohexanol, ethylene glycol, and water. PEDAS plays the role of both the cross-linker and the ligand provider, generating a macroporous nonpolar monolith having C17 chains as the chromatographic ligands. Despite the fact that the neutral PEDAS monolith is devoid of fixed charges, the monolithic capillary columns exhibited a relatively strong EOF due to the ability of PEDAS to adsorb sufficient amounts of electrolyte ions from the mobile phase. The adsorbed ions imparted the neutral PEDAS monolith the zeta potential necessary to support the EOF required for mass transport across the monolithic column. The absence of fixed charges on the surface of the neutral PEDAS monolith and in turn the adsorption sites for electrostatic attraction of charged solutes allowed the rapid and efficient separations of proteins and peptides at pH 7.0, with an average plate number of 255,000 and 121,000 plates/m, respectively. To the best of our knowledge, this constitutes the first report on the separation of proteins at neutral pH by RP-CEC using a neutral monolithic column.

Joule heating induced transient temperature field and its effects on electroosmosis in a microcapillary packed with microspheres

The Joule heating induced transient temperature field and its effect on the electroosmotic flow in a capillary packed with microspheres is analyzed numerically using the control-volume-based finite difference method. The model incorporates the coupled momentum equation for the electroosmotic velocity, the energy equations for the Joule heating induced temperature distributions in both the packed column and the capillary wall, and the mass and electric current continuity equations. The temperature-dependent physical properties of the electrolyte solution are taken into consideration. The characteristics of the Joule heating induced transient development of temperature and electroosmotic flow fields are studied. Specifically, the simulation shows that the presence of Joule heating causes a noticeable axial temperature gradient in the thermal entrance region and elevates a significant temperature increment inside the microcapillary. The temperature changes in turn greatly affect the electroosmotic velocity by means of the temperature-dependent fluid viscosity, dielectric constant, and local electric field strength. Furthermore, the model predicts an induced pressure gradient to counterbalance the axial variation of the electroosmotic velocity so as to maintain the fluid mass continuity. In addition, under specific conditions, the present model is validated by comparing with the existing analytical model and experimental data from the literature.

Numerical analysis of electroosmotic flow in dense regular and random arrays of impermeable, nonconducting spheres

We present a numerical scheme for analyzing steady-state isothermal electroosmotic flow (EOF) in three-dimensional random porous media, involving solution of the coupled Poisson, Nernst-Planck, and Navier-Stokes equations. While traditional finite-difference methods were used to resolve the Poisson-Nernst-Planck problem, the (electro)hydrodynamics has been addressed with high efficiency using the lattice-Boltzmann method. The developed model allows simulation of electrokinetic transport under most general conditions, including arbitrary value and distribution of electrokinetic potential at the solid-liquid interface, electrolyte composition, and pore space morphology. The approach provides quantitative information on a spatial distribution of simulated velocities. This feature was utilized to characterize EOF fields in regular and random, confined and bulk packings of hard (i.e., impermeable, nonconducting) spheres. Important aspects of pore space morphology (sphere size distribution), surface heterogeneity (mismatch in electrokinetic potentials at confining wall and sphere surface), and fluid phase properties (electrical double layer thickness) were investigated with respect to their influence on the EOF dynamics over microscopic and macroscopic spatial domains. Most important is the observation of a generally nonuniform pore-level EOF velocity profile in the sphere packings (even in the thin double layer limit) which is caused by pore space morphology and which is in contrast to the pluglike velocity distribution in a single, straight capillary under the same conditions.

Use of electrokinetic measurements for characterization of columns used in capillary electrochromatography

The separation mechanism in capillary electrochromatography (CEC) is a hybrid differential migration process, which entails the features of both high-performance liquid chromatography (HPLC) and capillary zone electrophoresis (CZE), i.e., chromatographic retention and electrophoretic migration. The focus of this paper is on the use of electrokinetic data, such as current, electroosmotic flow (EOF) and column efficiency measurements, that are readily available, for an improved understanding of CEC separations. A framework is presented here for the use of this data for evaluation of a variety of performance parameters including, conductivity ratio, interstitial EOF mobility, porosity, and zeta potential. This framework is applied for characterization of two monolithic columns with different chemistry that were manufactured in-house. The above-mentioned performance parameters were calculated for the two columns and it is found that the poly(VBC-EGDMA-SWNT) monolithic column with the GPTMS-PEI coating offers a significantly improved flow distribution in comparison to the poly(VBC-EGDMA) monolithic column. This observation is confirmed by performing separation of peptides on the two columns and height equivalent of a theoretical plate (HETP) measurements on the resulting peaks. It is shown that following our approach leads to an improved understanding of the separations achieved with the columns and to better column design.

Incorporation of Single-Wall Carbon Nanotubes into an Organic Polymer Monolithic Stationary Phase for μ-HPLC and Capillary Electrochromatography

Single-wall carbon nanotubes (SWNT) were incorporated into an organic polymer monolith containing vinylbenzyl chloride (VBC) and ethylene dimethacrylate (EDMA) to form a novel monolithic stationary phase for high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC). The retention behavior of neutral compounds on this poly(VBC-EDMA-SWNT) monolith was examined by separating a mixture of small organic molecules using micro-HPLC. The result indicated that incorporation of SWNT enhanced chromatographic retention of small neutral molecules in reversed-phase HPLC presumably because of their strongly hydrophobic characteristics. The stationary phase was formed inside a fused-silica capillary whose lumen was coated with covalently bound polyethyleneimine (PEI). The annular electroosmotic flow (EOF) generated by the PEI coating allowed peptide separation by CEC in the counterdirectional mode. Comparison of peptide separations on poly(VBC-EDMA-SWNT) and on poly(VBC-EDMA) with annular EOF generation revealed that the incorporation of SWNT into the monolithic stationary phase improved peak efficiency and influenced chromatographic retention. The structures of pretreated SWNT and poly(VBC-EDMA-SWNT) monolith were examined by high-resolution transmission electron microscopy, Raman spectroscopy, scanning electron microscopy, and multipoint BET nitrogen adsorption/desorption.

Exact electric field strength over the packed capillary electrochromatography column bed, theoretical considerations and practical determination

On the basis of the experiments, it was proved that Ohm's law holds true in a capillary electrochromatography (CEC) column. By using the additivity of the potential drop over the packed and unpacked sections, the exact values of the electric field strength over the packed CEC column bed were determined experimentally. The ratio of the resistance of packed CEC column sections to that of an open capillary of the same length (Rp/Ro,Lp) were calculated. Some theoretical calculations were made to show how some structural parameters of particle lattice affect the resulting Rp/Ro,Lp value of the column bed formed accordingly. It is suggested that to correctly elucidate the EOF phenomenon in a CEC column, the potential drop over the packed and unpacked column sections, Ep and Eo, should be accounted for respectively, rather than using the average field strength over the total column length.

Csaba Horváth's contribution to the theory and practice of capillary electrochromatography

This overview has been written as a tribute to a luminary of chromatography--Csaba Gyula Horváth, who passed away earlier this year. Since the scope of his work was enormous, the following pages focus only on one single aspect of his scientific activities, capillary electrochromatography. He was a visionary, recognizing the great potential of this method and devoted a large part of his efforts to studies of problems related to CEC, covering a huge variety of issues embracing the theoretical foundation, instrumentation, and column technology. During the period of time from 1996 to 2004, Csaba Horváth published almost 30 excellent papers concerning capillary electrochromatography, which are reviewed in this article.

Retention behaviour of peptides in capillary electrochromatography using an embedded ammonium in dodecacyl stationary phase

The potential of a silica stationary phase bearing an embedded cationic quaternary amine in dodecacyl chain, to separate peptides by capillary electrochromatography (CEC) has been evaluated. The ability of this stationary phase, to generate a consistent anodic electroosmotic flow was first evaluated. This flow was found to be independent of pH over a wide range (2-12), of the acetonitrile percentage in the electrolyte. The stability of the stationary phase evaluated through the electroosmotic flow variations was demonstrated at extreme pH values (2.5 and 9.1). A careful examination of the influence of mobile phase conditions (acetonitrile percentage, salt concentration and nature of buffer) on the electrochromatographic retention and electrophoretic migration behaviour of different standard peptides was carried out. In acidic conditions, the electrokinetic contribution appears to be predominant compared to the chromatographic one. Several types of chromatographic interactions, reversed-phase partitioning and anion exchange, were involved in the CEC of peptides, whereas repulsive electrostatic interaction could be considered as negligible. This stationary phase affords different selectivity compared to that observed on a C18 stationary phase. Finally, the method was applied to the peptide mapping of beta-lactoglobulin and human growth hormone under unpressurized and isocratic elution.

Joule heating and determination of temperature in capillary electrophoresis and capillary electrochromatography columns

This article reviews the progress that has taken place in the past decade on the topic of estimation of Joule heating and temperature inside an open or packed capillary in electro-driven separation techniques of capillary electrophoresis (CE) and capillary electrochromatography (CEC), respectively. Developments in theoretical modeling of the heat transfer in the capillary systems have focused on attempts to apply the existing models on newer techniques such as CEC and chip-based CE. However, the advent of novel analytical tools such as pulsed magnetic field gradient nuclear magnetic resonance (NMR), NMR thermometry, and Raman spectroscopy, have led to a revolution in the area of experimental estimation of Joule heating and temperature inside the capillary via the various noninvasive techniques. This review attempts to capture the major findings that have been reported in the past decade.

Study of an electroosmotic pump for liquid delivery and its application in capillary column liquid chromatography

A packed-bed electroosmotic pump (EOP) was constructed and evaluated. The EOP consisted of three capillary columns packed in parallel, a gas-releasing device, Pt electrodes and a high-voltage power supply. The EOP could generate output pressure above 5.0 MPa and constant flow rate in the range of nl/min to a few microl/min for pure water, pure methanol, 2 mM potassium dihydrogenphosphate buffer, the buffer-methanol mixture and the pure water-methanol mixture at applied potentials less than 20 kV. The composition of solvent before/after pumping was quantitatively determined by using a gas chromatograph equipped with both flame ionization detector and thermal conductivity detector. It was found that there were no apparent changes in composition and relative concentrations after pumping process for a methanol-ethanol-acetonitrile mixture and a methanol-water mixture. Theoretical aspect of the EOP was discussed in detail. An capillary HPLC system consisting of the EOP, an injection valve, a 15 cm x 320 microm i.d., 5 microm Spherigel C18 stainless steel analytical column, and an on-column UV detector was connected to evaluate the performance of the EOP. A comparative study was also carried out with a mechanical capillary HPLC pump on the same system. The results demonstrated that the reproducibility of flow rate and the pulsation-free flow property of the EOP are superior to that of mechanical pump in capillary HPLC application.

Capillary electrochromatography with monolithic silica columns

Two synthetic routes have been introduced and evaluated for the preparation of hydrophilic silica-based monoliths possessing surface-bound cyano functions. In one synthetic scheme, the silica monolith was reacted in a single step with 3-cyanopropyldimethylchlorosilane to yield a cyano phase referred to as CN-monolith. In a second synthetic route, the silica monolith was first reacted with gamma-glycidoxypropyltrimethoxysilane (gamma-GPTS), followed by a reaction with 3-hydroxypropionitrile (3-HPN) to give a stationary phase denoted CN-OH-monolith. Although the gamma-GPTS was intended to play the role of a spacer arm to link the 3-HPN to the silica surface, this spacer arm became an integral part of the hydrophilic stationary phase. Thus, the CN-OH-monolith can be viewed as a double-layered stationary phase (i.e., stratified phase) with a hydroxy sub-layer and a cyano top layer. Due to its stronger hydrophilic character, the CN-OH-monolith yielded higher retention and better selectivity than the CN-monolith. The CN-OH-monolith was demonstrated in the normal-phase capillary electrochromatography (CEC) of various polar compounds including phenols and chloro-substituted phenols, nucleic acid bases, nucleosides, and nitrophenyl derivatives of mono- and oligosaccharides. The CN-OH-monolith yielded a relatively strong electroosmotic flow over a wide range of mobile phase composition, thus allowing rapid separation of the polar compounds studied.

Capillary electrochromatography with monolithic stationary phases

This article, which is closely related to part II, is concerned with the evaluation of the retentive properties of cationic stearyl-acrylate monoliths (i.e. cationic C17 monoliths) over a wide range of elution conditions with various uncharged and charged solutes including proteins. The retention parameters for charged solutes including the retention factor k* observed under capillary electrochromatography conditions and the velocity factor k(ep)*, which reflects the electrophoretic process, were measured for weak, moderate and strong basic compounds. These retention parameters allowed the assessment of the respective contributions from electrophoretic and partitioning separation mechanisms. The cationic C17 monoliths exhibited sufficient hydrophobic interactions with relatively weak basic solutes. Moderate and strong bases showed migration behaviors dominated by their relatively strong electrophoretic mobility with marginal chromatographic partitioning. At low pH, the cationic C17 monoliths allowed the separation of proteins with minimum electrostatic interactions between proteins and the cationic sites on the surface of the stationary phase. The utility of the cationic C17 monoliths was demonstrated in the rapid and efficient separation of two crude extracts of membrane proteins, namely galactosyl transferase and cytochrome c reductase. Short capillary columns (8.5 cm effective length) of the cationic C17 monoliths allowed rapid and efficient separations of neutral and charged pesticides and metabolites, phenylthiohydrantoin amino acids and proteins at the time scale of seconds at relatively high flow velocity.

Electrochromatography with a 2.7 mm inner diameter monolithic column

Monolithic columns of 2.7 mm I.D. have been prepared and used in electrochromatography (EC) separation. Although capillary electrochromatography (CEC) has higher separation efficiency, it displays some shortcomings, such as limited sample loadability and restricted concentration detectability etc. In this paper, we investigate the feasibility of EC separation with millimeter diameter monolithic columns. By using a designed preparation method of monolithic column packed with about 150 microm quartz sand, the effect of Joule heating can be reduced, and the processes of frit making and column packing can be avoided. The concentration detectability of the EC is improved comparing with that of CEC. Moreover, the separation efficiency of 52,000 plates/m was achieved with a 70 mm length and 2.7 mm I.D. monolithic column.

Joule heating in packed capillaries used in capillary electrochromatography

Effective heat dissipation is critical for reproducible and efficient separations in electrically driven separation systems. Flow rate, retention kinetics, and analyte diffusion rates are some of the characteristics that are affected by variation in the temperature of the mobile phase inside the column. In this study, we examine the issue of Joule heating in packed capillary columns used in capillary electrochromatography (CEC). As almost all commonly used CEC packings are poor thermal conductors, it is assumed that the packing particles do not conduct heat and heat transfer is solely through the mobile phase flowing through the system. The electrical conductivity of various mobile phases was measured at different temperatures by a conductivity meter and the temperature coefficient for each mobile phase was calculated. This was followed by measurement of the electrical current at several applied voltages to calculate the conductivity of the solution within the column as a function of the applied voltage. An overall increase in the conductivity is attributed to Joule heating within the column, while a constant conductivity means good heat dissipation. A plot of conductivity versus applied voltage was used as the indicator of poor heat dissipation. Using theories that have been proposed earlier for modeling of Joule heating effects in capillary electrophoresis (CE), we estimated the temperature within CEC columns. Under mobile and stationary phase conditions typically used in CEC, heat dissipation was found to be not always efficient. Elevated temperatures within the columns in excess of 23 degrees C above ambient temperature were calculated for packed columns, and about 35 degrees C for an open column, under a given set of conditions. The results agree with recently published experimental findings with nuclear magnetic resonance (NMR) thermometry, and Raman spectroscopic measurements.

Capillary electrochromatography with monolithic stationary phases: 1. Preparation of sulfonated stearyl acrylate monoliths and their electrochromatographic characterization with neutral and charged solutes

A novel monolithic stationary phase having long alkyl chain ligands (C17) was introduced and evaluated in capillary electrochromatography (CEC) of small neutral and charged species. The monolithic stationary phase was prepared by the in situ copolymerization of pentaerythritol diacrylate monostearate (PEDAS) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) in a ternary porogenic solvent consisting of cyclohexanol/ethylene-glycol/water. While AMPS was meant to support the electroosmotic flow (EOF) necessary for transporting the mobile phase through the monolithic capillary, the PEDAS was introduced to provide the nonpolar sites for chromatographic retention. Monolithic columns at various EOF velocities were readily prepared by conveniently adjusting the amount of AMPS in the polymerization solution as well as the composition of the porogenic solvent. The monolithic stationary phases thus obtained exhibited reversed-phase chromatography behavior toward neutral solutes and yielded a relatively strong EOF. For charged solutes (e.g., dansyl amino acids), nonpolar as well as electrostatic interaction/repulsion with the monoliths were observed in addition to electrophoretic migration. Therefore, for charged solutes, selectivity and migration can be readily manipulated by changing various parameters including the nature of the monolith and the composition of the mobile phase (e.g., pH, ionic strength and organic modifier). Ultrafast separation on the time scale of seconds of 17 different charged and neutral pesticides and metabolites were performed using short capillary columns of 8.5 cm x 100 microm ID.

Electrochromatography in microchips: reversed-phase separation of peptides and amino acids using photopatterned rigid polymer monoliths

A microfabricated glass chip containing fluidic channels filled with polymer monolith has been developed for reversed-phase electrochromatography. Acrylate-based porous polymer monoliths were cast in the channels by photopolymerization to serve as a robust and uniform stationary phase. UV light-initiated polymerization allows for patterning of polymer stationary phase in the microchip, analogous to photolithography, using a mask and a UV lamp for optimal design of injection, separation, and detection manifolds. The monoliths are cast in situ in less than 10 min, are very reproducible with respect to separation characteristics, and allow easy manipulation of separation parameters such as charge, hydrophobicity, and pore size. Moreover, the solvent used to cast the polymer enables electroosmotic flow, allowing the separation channel to be conditioned without need for high-pressure pumps. The microchip was used for separation of bioactive peptides and amino acids labeled with a fluorogenic dye (naphthalene-2,3-dicarboxaldehyde) followed by laser-induced fluorescence detection using a Kr+ ion laser. The microchip-based separations were fast (six peptides in 45 s), efficient (up to 600,000 plates/m), and outperformed the capillary-based separations in both speed and efficiency. We have also developed a method for complete removal of polymer from the channels by thermal incineration to regenerate the glass chips.

Enhancement of electroosmotic flow in capillary electrochromatography

A major impediment to enhancing the speed of separation in capillary electrochromatography (CEC) is the upper limit on the electroosmotic flow (EOF) velocity by the maximal zeta potential of the chromatographic surface. Here, a new approach to speeding up EOF, suggested by Yang and El Rassi (Electrophoresis 1999, 20,18-23), is examined critically. It entails the use of a tandem arrangement of a separating column and an auxiliary column, the sole function of which is to boost EOF velocity in the separating column and thus facilitate faster analysis by CEC. Based on the principle of conservation of mass and current and using experimental data obtained in a wide range of conditions, the flow velocities in the separating and auxiliary columns were evaluated. The results show that an equidiameter open tubular auxiliary column offers a greater enhancement of EOF velocity than a packed column. Nevertheless, within the scope of the experiments the enhancement of EOF velocity by as much as 50% by using open tubular auxiliary columns has been obtained.

Characterisation of electroosmotic flow in capillary electrochromatography columns

Currently available capillary electrochromatography (CEC) instrumentation using UV-Vis detection dictates the use of duplex columns. Due to discontinuities (electric field strength and conductivity) that arise at the boundary between the packed and open sections in these columns, the determination of the electroosmotic flow (EOF) is complicated. Thiourea has been found to be an accurate EOF marker under the conditions employed in this study. By injecting this compound onto a fully packed column and comparing the obtained mobilities with those calculated from measured zeta potential values a value for tortuosity has been obtained. The use of laser Doppler velocimetry (LDV) for the measurement of zeta potential has been found to be the most direct and rapid method of characterising silica support materials in terms of electroosmotic mobility. The open section in duplex CEC columns has been shown to influence the actual column flow-rate. The EOF measured using duplex columns of varying packed and open section lengths have been compared with those obtained for a fully packed column.

Enantioseparations by capillary electrochromatography

The review summarizes recent developments in enantioseparations by capillary electrochromatography (CEC). Selected fundamental aspects of CEC are discussed in order to stress those features which may allow the success of this technique in the competitive field of enantioseparations. In addition, the comparative characteristics of the different modes of chiral CEC and the stationary phases are presented. The effects of the characteristics of the stationary and liquid phases and operational conditions on the separation results are discussed. Finally, some future trends are briefly addressed.

Effect of organic solvent, electrolyte salt and a loading of cellulose tris (3,5-dichlorophenyl-carbamate) on silica gel on enantioseparation characteristics in capillary electrochromatography

The effect of the amount of the chiral selector, cellulose tris(3,5-dichlorophenylcarbamate) (CDCPC) on the separation characteristics of enantiomers of some charged and neutral analytes was studied in capillary electrochromatography (CEC). For better understanding of the effect of the loading of the chiral selector on the particles and pore size of the packing material, laser-beam particle size analyzer and scanning electron microscopy (SEM) were used. As shown in this study, CDCPC can be used for CEC enantioseparations of a wide range of chiral charged and neutral analytes with high efficiency. The loading of the polysaccharide derivative on the surface of silica materials even in high amounts does not markedly affect the particle size and porous structure of the packing material. The separation characteristics are strongly affected by the loading of CDCPC onto silica gel in both CEC and capillary liquid chromatography (CLC).

Preparation and characterization of monolithic polymer columns for capillary electrochromatography

A series of micro-monolithic columns with different porosities were prepared for capillary electrochromatography (CEC) by in-situ copolymerization of butyl methacrylate, ethylene glycol dimethacrylate, and 2-acrylamido-2-methyl-1-propane-sulfonic acid in the presence of a porogen in fused-silica capillaries of 100 microm I.D. Different column porosities were obtained by changing the ratios of monomers to porogenic solvents. Columns were investigated and evaluated under both pressure-driven (high-performance liquid chromatography, HPLC) and electro-driven (capillary electrochromatography, CEC) conditions. Each column exhibited different efficiency and dependency on flow velocity under electro-driven conditions. Abnormally broad peaks for some relatively bulky molecules were observed. Possible explanations are discussed. The differences in column efficiency and retention behavior between the two eluent-driven modes were studied in detail. In addition, other column properties, such as morphology, porosity, stability and reproducibility, were extensively tested.