Template Synthesis of Noble Metal Nanocrystals with Unusual Crystal Structures and Their Catalytic Applications

Regulating the Electrochemical Nitrate Reduction Performance with Controllable Distribution of Unconventional Phase Copper on Alloy Nanostructures

Electrochemical nitrate reduction reaction (NO3RR) is emerging as a promising strategy for nitrate removal and ammonia (NH3) production using renewable electricity. Although great progresses have been achieved, the crystal phase effect of electrocatalysts on NO3RR remains rarely explored. Here, the epitaxial growth of unconventional 2H Cu on hexagonal close-packed (hcp) IrNi template, resulting in the formation of three IrNiCu@Cu nanostructures, is reported. IrNiCu@Cu-20 shows superior catalytic performance, with NH3 Faradaic efficiency (FE) of 86% at -0.1 (vs reversible hydrogen electrode [RHE]) and NH3 yield rate of 687.3 mmol gCu -1 h-1, far better than common face-centered cubic Cu. In sharp contrast, IrNiCu@Cu-30 and IrNiCu@Cu-50 covered by hcp Cu shell display high selectivity toward nitrite (NO2 -), with NO2 - FE above 60% at 0.1 (vs RHE). Theoretical calculations have demonstrated that the IrNiCu@Cu-20 has the optimal electronic structures for NO3RR due to the highest d-band center and strongest reaction trend with the lowest energy barriers. The high electroactivity of IrNiCu@Cu-20 originates from the abundant low coordination of Cu sites on the surface, which guarantees the fast electron transfer to accelerate the intermediate conversions. This work provides a feasible tactic to regulate the product distribution of NO3RR by crystal phase engineering of electrocatalysts.

Dependence of lactose adsorption on the exposed crystal facets of metals: a comparative study of gold, silver and copper

In this theoretical work, we investigated the adsorption of a lactose molecule on metal-based surfaces, with a focus on the influence of the nature of the metal and of the type of exposed crystal facet on the adsorbed structures and energetics. More precisely, we considered three flat crystallographic facets of three face-centered cubic metals (gold, silver, and copper). For the global exploration of the energy landscape, we employed a multi-stage procedure where high-throughput searches, using a stochastic method that performs global optimization by iterating local searches, are followed by a refinement of the most probable adsorption conformations of the molecule at the ab initio level. We predicted the optimal conformation of lactose on each of the nine metal-surface combinations, classified the many low-energy minima into possible adsorption modes, and analyzed the structural, electronic and energetic aspects of the lactose molecule on the surface, as well as their dependence on the type of metal and exposed crystal facet. We observed structural similarities between the various minimum-energy conformations of lactose in vacuum and on the surface, a rough correlation between adsorption and interaction energies of the molecule, and a small charge transfer between molecule and surface whose direction is metal-dependent. During adsorption, an electronic reorganization occurs at the metal-molecule interface only, without affecting the vacuum-pointing atoms of the lactose molecule. For all types of surfaces, lactose exhibits the weakest adsorption on silver substrates, while for each coinage metal the adsorption is strongest on the (110) crystal facet. This study demonstrates that the control of exposed facets can allow to modulate the interaction between metals and small saccharides.

Site-Selective Growth of fcc-2H-fcc Copper on Unconventional Phase Metal Nanomaterials for Highly Efficient Tandem CO2 Electroreduction

Copper (Cu) nanomaterials are a unique kind of electrocatalysts for high-value multi-carbon production in carbon dioxide reduction reaction (CO2RR), which holds enormous potential in attaining carbon neutrality. However, phase engineering of Cu nanomaterials remains challenging, especially for the construction of unconventional phase Cu-based asymmetric heteronanostructures. Here the site-selective growth of Cu on unusual phase gold (Au) nanorods, obtaining three kinds of heterophase fcc-2H-fcc Au-Cu heteronanostructures is reported. Significantly, the resultant fcc-2H-fcc Au-Cu Janus nanostructures (JNSs) break the symmetric growth mode of Cu on Au. In electrocatalytic CO2RR, the fcc-2H-fcc Au-Cu JNSs exhibit excellent performance in both H-type and flow cells, with Faradaic efficiencies of 55.5% and 84.3% for ethylene and multi-carbon products, respectively. In situ characterizations and theoretical calculations reveal the co-exposure of 2H-Au and 2H-Cu domains in Au-Cu JNSs diversifies the CO* adsorption configurations and promotes the CO* spillover and subsequent C-C coupling toward ethylene generation with reduced energy barriers.

Tuning the Selectivity of Catalytic Nitrile Hydrogenation with Phase-Controlled Co Nanoparticles Prepared by Hydrosilane-Assisted Method

Cobalt (Co) is a promising candidate to replace noble metals in the hydrogenation process, which is widely employed in the chemical industry. Although the catalytic performance for this reaction has been considered to be significantly dependent on the Co crystal phase, no satisfactory systematic studies have been conducted, because it is difficult to synthesize metal nanoparticles that have different crystalline structures with similar sizes. Here we report a new method for the synthesis of cobalt nanoparticles using hydrosilane as a reducing agent (hydrosilane-assisted method). This new method uses 1,3-butanediol and propylene glycol to successfully prepare fcc and hcp cobalt nanoparticles, respectively. These two types of Co nanoparticles have similar sizes and surface areas. The hcp Co nanoparticles exhibit higher catalytic performance than fcc nanoparticles for the hydrogenation of benzonitrile under mild conditions. The present hcp Co catalyst is also effective for highly selective benzyl amine production from benzonitrile without ammonia addition, whereas many catalytic systems require ammonia addition for selective benzyl amine production. Mechanistic studies revealed that the fast formation of the primary amine and the prevention of condensation and secondary amine hydrogenation promote selective benzonitrile hydrogenation for benzylamine over hcp Co nanoparticles.

Metal-organic framework derived crystalline nanocarbon for Fenton-like reaction

Nanoporous carbons with tailorable nanoscale texture and long-range ordered structure are promising candidates for energy, environmental and catalytic applications, while the current synthetic methods do not allow elaborate control of local structure. Here we report a salt-assisted strategy to obtain crystalline nanocarbon from direct carbonization of metal-organic frameworks (MOFs). The crystalline product maintains a highly ordered two-dimensional (2D) stacking mode and substantially differs from the traditional weakly ordered patterns of nanoporous carbons upon high-temperature pyrolysis. The MOF-derived crystalline nanocarbon (MCC) comes with a high level of nitrogen and oxygen terminating the 2D layers and shows an impressive performance as a carbocatalyst in Fenton-like reaction for water purification. The successful preparation of MCC illustrates the possibility to discover other crystalline heteroatom-doped carbon phases starting from correctly designed organic precursors and appropriate templating reactions.

Metal-organic frameworks for high-performance cathodes in batteries

Metal-organic frameworks (MOFs) are functional materials that are proving to be indispensable for the development of next-generation batteries. The porosity, crystallinity, and abundance of active sites in MOFs, which can be tuned by selecting the appropriate transition metal/organic linker combination, enable MOFs to meet the performance requirements for cathode materials in batteries. Recent studies on the use of MOFs in cathodes have verified their high durability, cyclability, and capacity thus demonstrating the huge potential of MOFs as high-performance cathode materials. However, to keep pace with the rapid growth of the battery industry, several challenges hindering the development of MOF-based cathode materials need to be overcome. This review analyzes current applications of MOFs to commercially available lithium-ion batteries as well as advanced batteries still in the research stage. This review provides a comprehensive outlook on the progress and potential of MOF cathodes in meeting the performance requirements of the future battery industry.

Crystal-Phase-Selective Etching of Heterophase Au Nanostructures

Selective oxidative etching is one of the most effective ways to prepare hollow nanostructures and nanocrystals with specific exposed facets. The mechanism of selective etching in noble metal nanostructures mainly relies on the different reactivity of metal components and the distinct surface energy of multimetallic nanostructures. Recently, phase engineering of nanomaterials (PEN) offers new opportunities for the preparation of unique heterostructures, including heterophase nanostructures. However, the synthesis of hollow multimetallic nanostructures based on crystal-phase-selective etching has been rarely studied. Here, a crystal-phase-selective etching method is reported to selectively etch the unconventional 4H and 2H phases in the heterophase Au nanostructures. Due to the coating of Pt-based alloy and the crystal-phase-selective etching of 4H-Au in 4H/face-centered cubic (fcc) Au nanowires, the well-defined ladder-like Au@PtAg nanoframes are prepared. In addition, the 2H-Au in the fcc-2H-fcc Au nanorods and 2H/fcc Au nanosheets can also be selectively etched using the same method. As a proof-of-concept application, the ladder-like Au@PtAg nanoframes are used for the electrocatalytic hydrogen evolution reaction (HER) in acidic media, showing excellent performance that is comparable to the commercial Pt/C catalyst.

Controlled Synthesis of Unconventional Phase Alloy Nanobranches for Highly Selective Electrocatalytic Nitrite Reduction to Ammonia

The controlled synthesis of metal nanomaterials with unconventional phases is of significant importance to develop high-performance catalysts for various applications. However, it remains challenging to modulate the atomic arrangements of metal nanomaterials, especially the alloy nanostructures that involve different metals with distinct redox potentials. Here we report the general one-pot synthesis of IrNi, IrRhNi and IrFeNi alloy nanobranches with unconventional hexagonal close-packed (hcp) phase. Notably, the as-synthesized hcp IrNi nanobranches demonstrate excellent catalytic performance towards electrochemical nitrite reduction reaction (NO2RR), with superior NH3 Faradaic efficiency and yield rate of 98.2 % and 34.6 mg h-1 mgcat -1 (75.5 mg h-1 mgIr -1) at 0 and -0.1 V (vs reversible hydrogen electrode), respectively. Ex/in situ characterizations and theoretical calculations reveal that the Ir-Ni interactions within hcp IrNi alloy improve electron transfer to benefit both nitrite activation and active hydrogen generation, leading to a stronger reaction trend of NO2RR by greatly reducing energy barriers of rate-determining step.

Elucidating the Role of Reduction Kinetics in the Phase-Controlled Growth on Preformed Nanocrystal Seeds: A Case Study of Ru

This study demonstrates the crucial role of reduction kinetics in phase-controlled synthesis of noble-metal nanocrystals using Ru nanocrystals as a case study. We found that the reduction kinetics played a more important role than the templating effect from the preformed seed in dictating the crystal structure of the deposited overlayers despite their intertwined effects on successful epitaxial growth. By employing two different polyols, a series of Ru nanocrystals with tunable sizes of 3-7 nm and distinct patterns of crystal phase were synthesized by incorporating different types of Ru seeds. Notably, the use of ethylene glycol and triethylene glycol consistently resulted in the formation of Ru shell in natural hexagonal close-packed (hcp) and metastable face-centered cubic (fcc) phases, respectively, regardless of the size and phase of the seed. Quantitative measurements and theoretical calculations suggested that this trend was a manifestation of the different reduction kinetics associated with the precursor and the chosen polyol, which, in turn, affected the reduction pathway (solution versus surface) and packing sequence of the deposited Ru atoms. This work not only underscores the essential role of reduction kinetics in controlling the packing of atoms and thus the phase taken by Ru nanocrystals but also suggests a potential extension to other noble-metal systems.

Electronic Structure Design of Transition Metal-Based Catalysts for Electrochemical Carbon Dioxide Reduction

With the increasingly serious greenhouse effect, the electrochemical carbon dioxide reduction reaction (CO2RR) has garnered widespread attention as it is capable of leveraging renewable energy to convert CO2 into value-added chemicals and fuels. However, the performance of CO2RR can hardly meet expectations because of the diverse intermediates and complicated reaction processes, necessitating the exploitation of highly efficient catalysts. In recent years, with advanced characterization technologies and theoretical simulations, the exploration of catalytic mechanisms has gradually deepened into the electronic structure of catalysts and their interactions with intermediates, which serve as a bridge to facilitate the deeper comprehension of structure-performance relationships. Transition metal-based catalysts (TMCs), extensively applied in electrochemical CO2RR, demonstrate substantial potential for further electronic structure modulation, given their abundance of d electrons. Herein, we discuss the representative feasible strategies to modulate the electronic structure of catalysts, including doping, vacancy, alloying, heterostructure, strain, and phase engineering. These approaches profoundly alter the inherent properties of TMCs and their interaction with intermediates, thereby greatly affecting the reaction rate and pathway of CO2RR. It is believed that the rational electronic structure design and modulation can fundamentally provide viable directions and strategies for the development of advanced catalysts toward efficient electrochemical conversion of CO2 and many other small molecules.

Strain Engineering of Unconventional Crystal-Phase Noble Metal Nanocatalysts

The crystal phase, alongside the composition, morphology, architecture, facet, size, and dimensionality, has been recognized as a critical factor influencing the properties of noble metal nanomaterials in various applications. In particular, unconventional crystal phases can potentially enable fascinating properties in noble metal nanomaterials. Recent years have witnessed notable advances in the phase engineering of nanomaterials (PEN). Within the accessible strategies for phase engineering, the effect of strain cannot be ignored because strain can act not only as the driving force of phase transition but also as the origin of the diverse physicochemical properties of the unconventional crystal phase. In this review, we highlight the development of unconventional crystal-phase noble metal nanomaterials within strain engineering. We begin with a short introduction of the unconventional crystal phase and strain effect in noble metal nanomaterials. Next, the correlations of the structure and performance of strain-engineered unconventional crystal-phase noble metal nanomaterials in electrocatalysis are highlighted, as well as the phase transitions of noble metal nanomaterials induced by the strain effect. Lastly, the challenges and opportunities within this rapidly developing field (i.e., the strain engineering of unconventional crystal-phase noble metal nanocatalysts) are discussed.

Crystal Phase Engineering of Ultrathin Alloy Nanostructures for Highly Efficient Electroreduction of Nitrate to Ammonia

Electrocatalytic nitrate reduction reaction (NO3RR) toward ammonia synthesis is recognized as a sustainable strategy to balance the global nitrogen cycle. However, it still remains a great challenge to achieve highly efficient ammonia production due to the complex proton-coupled electron transfer process in NO3RR. Here, the controlled synthesis of RuMo alloy nanoflowers (NFs) with unconventional face-centered cubic (fcc) phase and hexagonal close-packed/fcc heterophase for highly efficient NO3RR is reported. Significantly, fcc RuMo NFs demonstrate high Faradaic efficiency of 95.2% and a large yield rate of 32.7 mg h-1 mgcat -1 toward ammonia production at 0 and -0.1 V (vs reversible hydrogen electrode), respectively. In situ characterizations and theoretical calculations have unraveled that fcc RuMo NFs possess the highest d-band center with superior electroactivity, which originates from the strong Ru─Mo interactions and the high intrinsic activity of the unconventional fcc phase. The optimal electronic structures of fcc RuMo NFs supply strong adsorption of key intermediates with suppression of the competitive hydrogen evolution, which further determines the remarkable NO3RR performance. The successful demonstration of high-performance zinc-nitrate batteries with fcc RuMo NFs suggests their substantial application potential in electrochemical energy supply systems.

Diagnosis of Mycobacterium tuberculosis using palladium-platinum bimetallic nanoparticles combined with paper-based analytical devices

In this study, we demonstrate that palladium-platinum bimetallic nanoparticles (Pd@Pt NPs) as the nanozyme, combined with a multi-layer paper-based analytical device and DNA hybridization, can successfully detect Mycobacterium tuberculosis. This nanozyme has peroxidase-like properties, which can increase the oxidation rate of the substrate. Compared with horseradish peroxidase, which is widely used in traditional detection, the Michaelis constants of Pd@Pt NPs are fourteen and seventeen times lower than those for 3,3',5,5'-tetramethylbenzidine and H2O2, respectively. To verify the catalytic efficiency of Pd@Pt NPs, this study will execute molecular diagnosis of Mycobacterium tuberculosis. We chose the IS6110 fragment as the target DNA and divided the complementary sequences into the capture DNA and reporter DNA. They were modified on paper and Pd@Pt NPs, respectively, to detect Mycobacterium tuberculosis on a paper-based analytical device. With the above-mentioned method, we can detect target DNA within 15 minutes with a linear range between 0.75 and 10 nM, and a detection limit of 0.216 nM. These results demonstrate that the proposed platform (a DNA-nanozyme integrated paper-based analytical device, dnPAD) can provide sensitive and on-site infection prognosis in areas with insufficient medical resources.

Phase-selective in-plane heteroepitaxial growth of H-phase CrSe2

Phase engineering of two-dimensional transition metal dichalcogenides (2D-TMDs) offers opportunities for exploring unique phase-specific properties and achieving new desired functionalities. Here, we report a phase-selective in-plane heteroepitaxial method to grow semiconducting H-phase CrSe2. The lattice-matched MoSe2 nanoribbons are utilized as the in-plane heteroepitaxial template to seed the growth of H-phase CrSe2 with the formation of MoSe2-CrSe2 heterostructures. Scanning tunneling microscopy and non-contact atomic force microscopy studies reveal the atomically sharp heterostructure interfaces and the characteristic defects of mirror twin boundaries emerging in the H-phase CrSe2 monolayers. The type-I straddling band alignments with band bending at the heterostructure interfaces are directly visualized with atomic precision. The mirror twin boundaries in the H-phase CrSe2 exhibit the Tomonaga-Luttinger liquid behavior in the confined one-dimensional electronic system. Our work provides a promising strategy for phase engineering of 2D TMDs, thereby promoting the property research and device applications of specific phases.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

In Situ TEM Characterization and Modulation for Phase Engineering of Nanomaterials

Solid-state phase transformation is an intriguing phenomenon in crystalline or noncrystalline solids due to the distinct physical and chemical properties that can be obtained and modified by phase engineering. Compared to bulk solids, nanomaterials exhibit enhanced capability for phase engineering due to their small sizes and high surface-to-volume ratios, facilitating various emerging applications. To establish a comprehensive atomistic understanding of phase engineering, in situ transmission electron microscopy (TEM) techniques have emerged as powerful tools, providing unprecedented atomic-resolution imaging, multiple characterization and stimulation mechanisms, and real-time integrations with various external fields. In this Review, we present a comprehensive overview of recent advances in in situ TEM studies to characterize and modulate nanomaterials for phase transformations under different stimuli, including mechanical, thermal, electrical, environmental, optical, and magnetic factors. We briefly introduce crystalline structures and polymorphism and then summarize phase stability and phase transformation models. The advanced experimental setups of in situ techniques are outlined and the advantages of in situ TEM phase engineering are highlighted, as demonstrated via several representative examples. Besides, the distinctive properties that can be obtained from in situ phase engineering are presented. Finally, current challenges and future research opportunities, along with their potential applications, are suggested.

Two-dimensional mesoporous metals: a new era for designing functional electrocatalysts

Two-dimensional (2D) mesoporous metals contribute a unique class of electrocatalyst materials for electrochemical applications. The penetrated mesopores of 2D mesoporous metals expose abundant accessible undercoordinated metal sites, while their 2D nanostructures accelerate the transport of electrons and reactants. Therefore, 2D mesoporous metals have exhibited add-in structural functions with great potential in electrocatalysis that not only enhance electrocatalytic activity and stability but also optimize electrocatalytic selectivity. In this Perspective, we summarize recent progress in the design, synthesis, and electrocatalytic performance of 2D mesoporous metals. Four main strategies for synthesizing 2D mesoporous metals, named the CO (and CO container) induced route, halide ion-oriented route, interfacial growth route, and metal oxide atomic reconstruction route, are presented in detail. Moreover, electrocatalytic applications in several important reactions are summarized to highlight the add-in structural functions of 2D mesoporous metals in enhancing electrochemical activity, stability, and selectivity. Finally, current challenges and future directions are discussed in this area. This Perspective offers some important insights into both fundamental investigations and practical applications of novel high-performance functional electrocatalysts.

A MXene@AgAu@PDA nanoplatform loaded with AgAu nanocages for enhancing catalytic activity and antibacterial performance

With the rapid development of social industrialization, environmental problems seriously threaten people's health, especially water pollution. Therefore, there is an urgent need to construct a multifunctional nanoplatform for different scenarios. Two-dimensional MXene@AgAu@PDA nanosheets loaded with AgAu bimetallic nanocages have been prepared by a one-step method. First, the in situ generated MXene@Ag is used as an auxiliary template, and then HAuCl4 and dopamine are added for in situ redox-oxidizing polymerization reactions to obtain AgAu catalytic nanocages and the protective polydopamine (PDA) layer which can improve the stability and biocompatibility. MXene and PDA have excellent photothermal conversion ability while hollow AgAu nanocages have strong absorption in the near-infrared region and a local surface plasmonic resonance effect. In comparison to the catalytic reaction rates under dark and room temperature conditions, the catalytic kinetic rate of MXene@AgAu@PDA nanosheets under near-infrared irradiation increases from 0.13 to 0.69 min-1 mg-1. Density functional theory (DFT) is used to study the electron transfer behavior between AgAu nanocages and MXene nanosheets, and the mechanism of the enhanced catalytic reaction rate is analyzed. Besides, due to its Ag ions and photothermal coupling antibacterial properties, 40 μg mL-1 MXene@AgAu@PDA nanosheets inactivates nearly all E. coli and S. aureus after irradiation with near-infrared light for 6 min.

Bimetallic core-shell nanocrystals: opportunities and challenges

With mastery over the colloidal synthesis of monometallic nanocrystals, a combination of two distinct metals with intricate architectures has emerged as a new direction of innovation. Among the diverse architectures, the one with a core-shell structure has attracted the most scientific endeavors owing to its merits of high controllability and variability. Along with the new hopes arising from the addition of a shell composed of a different metal, there comes unexpected complications for the surface composition, hindering both structural understanding and application performance. In this Focus article, we present a brief overview of the opportunities provided by the bimetallic core-shell nanocrystals, followed by a discussion of the technical challenge to elucidate the true composition of the outermost surface. Some of the promising solutions are then highlighted as well, aiming to inspire future efforts toward this frontier of research.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Coherent hexagonal platinum skin on nickel nanocrystals for enhanced hydrogen evolution activity

Metastable noble metal nanocrystals may exhibit distinctive catalytic properties to address the sluggish kinetics of many important processes, including the hydrogen evolution reaction under alkaline conditions for water-electrolysis hydrogen production. However, the exploration of metastable noble metal nanocrystals is still in its infancy and suffers from a lack of sufficient synthesis and electronic engineering strategies to fully stimulate their potential in catalysis. In this paper, we report a synthesis of metastable hexagonal Pt nanostructures by coherent growth on 3d transition metal nanocrystals such as Ni without involving galvanic replacement reaction, which expands the frontier of the phase-replication synthesis. Unlike noble metal substrates, the 3d transition metal substrate owns more crystal phases and lower cost and endows the hexagonal Pt skin with substantial compressive strains and programmable charge density, making the electronic properties particularly preferred for the alkaline hydrogen evolution reaction. The energy barriers are greatly reduced, pushing the activity to 133 mA cm_geo^-2 and 17.4 mA μg_Pt^-1 at -70 mV with 1.5 µg of Pt in 1 M KOH. Our strategy paves the way for metastable noble metal catalysts with tailored electronic properties for highly efficient and cost-effective energy conversion.

Metal functionalization of two-dimensional nanomaterials for electrochemical carbon dioxide reduction

With the mechanical exfoliation of graphene in 2004, researchers around the world have devoted significant efforts to the study of two-dimensional (2D) nanomaterials. Nowadays, 2D nanomaterials are being developed into a large family with varieties of structures and derivatives. Due to their fascinating electronic, chemical, and physical properties, 2D nanomaterials are becoming an important type of catalyst for the electrochemical carbon dioxide reduction reaction (CO₂RR). Here, we review the recent progress in electrochemical CO₂RR using 2D nanomaterial-based catalysts. First, we briefly describe the reaction mechanism of electrochemical CO₂ reduction to single-carbon (C₁) and multi-carbon (C₂₊) products. Then, we discuss the strategies and principles for applying metal materials to functionalize 2D nanomaterials, such as graphene-based materials, metal-organic frameworks (MOFs), and transition metal dichalcogenides (TMDs), as well as applications of resultant materials in the electrocatalytic CO₂RR. Finally, we summarize the present research advances and highlight the current challenges and future opportunities of using metal-functionalized 2D nanomaterials in the electrochemical CO₂RR.

2D Zinc Oxide - Synthesis, Methodologies, Reaction Mechanism, and Applications

Zinc oxide (ZnO) is a thermally stable n-type semiconducting material. ZnO 2D nanosheets have mainly gained substantial attention due to their unique properties, such as direct bandgap and strong excitonic binding energy at room temperature. These are widely utilized in piezotronics, energy storage, photodetectors, light-emitting diodes, solar cells, gas sensors, and photocatalysis. Notably, the chemical properties and performances of ZnO nanosheets largely depend on the nano-structuring that can be regulated and controlled through modulating synthetic strategies. Two synthetic approaches, top-down and bottom-up, are mainly employed for preparing ZnO 2D nanomaterials. However, owing to better results in producing defect-free nanostructures, homogenous chemical composition, etc., the bottom-up approach is extensively used compared to the top-down method for preparing ZnO 2D nanosheets. This review presents a comprehensive study on designing and developing 2D ZnO nanomaterials, followed by accenting its potential applications. To begin with, various synthetic strategies and attributes of ZnO 2D nanosheets are discussed, followed by focusing on methodologies and reaction mechanisms. Then, their deliberation toward batteries, supercapacitors, electronics/optoelectronics, photocatalysis, sensing, and piezoelectronic platforms are further discussed. Finally, the challenges and future opportunities are featured based on its current development.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

Strategies for Promoting Catalytic Performance of Ru-based Electrocatalysts towards Oxygen/Hydrogen Evolution Reaction

Ru-based materials hold great promise for substituting Pt as potential electrocatalysts toward water electrolysis. Significant progress is made in the fabrication of advanced Ru-based electrocatalysts, but an in-depth understanding of the engineering methods and induced effects is still in their early stage. Herein, we organize a review that focusing on the engineering strategies toward the substantial improvement in electrocatalytic OER and HER performance of Ru-based catalysts, including geometric structure, interface, phase, electronic structure, size, and multicomponent engineering. Subsequently, the induced enhancement in catalytic performance by these engineering strategies are also elucidated. Furthermore, some representative Ru-based electrocatalysts for the electrocatalytic HER and OER applications are also well presented. Finally, the challenges and prospects are also elaborated for the future synthesis of more effective Ru-based catalysts and boost their future application.

Crystal phase engineering of Ru for simultaneous selective photocatalytic oxidations and H2 production

Noble metal nanoparticles are often used as cocatalysts to enhance the photocatalytic efficiency. While the effect of cocatalyst nanoparticle size and shape has widely been explored, the effect of the crystal phase is largely overlooked. In this work, we investigate the effect of Ru nanoparticle crystal phase, specifically regular hexagonal close-packed (hcp) and allotropic face-centered cubic (fcc) crystal phases, as cocatalyst decorated onto the surface of TiO₂ photocatalysts. As reference photocatalytic reaction the simultaneous photocatalytic production of benzaldehyde (BAD) and H₂ from benzyl alcohol was chosen. Both the fcc Ru/TiO₂ and hcp Ru/TiO₂ composites exhibit enhanced BAD and H₂ production rates compared to pristine TiO₂ due to the formation of a Schottky barrier promoting the photogenerated charge separation. Moreover, a 1.9-fold photoactivity enhancement of the fcc Ru/TiO₂ composite is achieved as compared to the hcp Ru/TiO₂ composite, which is attributed to the fact that the fcc Ru NPs are more efficient in facilitating the charge transfer as compared to hcp Ru NPs, thus inhibiting the recombination of electron-hole pairs and enhancing the overall photoactivity.

Recent advances in epitaxial heterostructures for electrochemical applications

Construction of epitaxial heterostructures is crucial for boosting the electrochemical properties of various materials, however a review dedicated to this attractive topic is still lacking. In this Minireview, a timely summary on the achievements of epitaxial heterostructure design for electrochemical applications is provided. We first introduce the synthesis strategies to provide fundamental understanding on how to create epitaxial interfaces between different components. Secondly, the superiorities of epitaxial heterostructures in electrocatalysis, supercapacitors and batteries are highlighted with the underlying structure-property relationship elucidated. Finally, a discussion on the challenges and future prospects of this field is presented.

Boosting the reaction kinetics in aprotic lithium-carbon dioxide batteries with unconventional phase metal nanomaterials

Given the high energy density and eco-friendly characteristics, lithium-carbon dioxide (Li-CO2) batteries have been considered to be a next-generation energy technology to promote carbon neutral and space exploration. However, Li-CO2 batteries suffer from sluggish reaction kinetics, causing large overpotential and poor energy efficiency. Here, we observe enhanced reaction kinetics in aprotic Li-CO2 batteries with unconventional phase 4H/face-centered cubic (fcc) iridium (Ir) nanostructures grown on gold template. Significantly, 4H/fcc Ir exhibits superior electrochemical performance over fcc Ir in facilitating the round-trip reaction kinetics of Li+-mediated CO2 reduction and evolution, achieving a low charge plateau below 3.61 V and high energy efficiency of 83.8%. Ex situ/in situ studies and theoretical calculations reveal that the boosted reaction kinetics arises from the highly reversible generation of amorphous/low-crystalline discharge products on 4H/fcc Ir via the Ir-O coupling. The demonstration of flexible Li-CO2 pouch cells with 4H/fcc Ir suggests the feasibility of using unconventional phase nanomaterials in practical scenarios.

Phase Engineering of a Ruthenium Nanostructure toward High-Performance Bifunctional Hydrogen Catalysis

The physicochemical properties and catalytic performance of transition metals are highly phase-dependent. Ru-based nanomaterials are superior catalysts toward hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR), but studies are mostly limited to conventional hexagonal-close-packed (hcp) Ru, mainly arising from the difficulty in synthesizing Ru with pure face-centered-cubic (fcc) phase. Herein, we report a crystal-phase-dependent catalytic study of MoO_x-modified Ru (MoO_x-Ru fcc and MoO_x-Ru hcp) for bifunctional HER and HOR. MoO_x-Ru fcc is proven to outperform MoO_x-Ru hcp in catalyzing both HER and HOR with much higher catalytic activity and more durable stability. The modification effect of MoO_x gives rise to optimal adsorption of H and OH especially on fcc Ru, which thus has resulted in the superior catalytic performance. This work highlights the significance of phase engineering in constructing superior electrocatalysts and may stimulate more efforts on phase engineering of other metal-based materials for diversified applications.

Versatile Carbon Nanofiber-Based Sensors

Carbon nanofibers (CNFs) display colossal potential in different fields like energy, catalysis, biomedicine, sensing, and environmental science. CNFs have revealed extensive uses in various sensing platforms due to their distinctive structure, properties, function, and accessible surface functionalization capabilities. This review presents insight into various fabrication methods for CNFs like electrospinning, chemical vapor deposition, and template methods with merits and demerits of each technique. Also, we give a brief overview of CNF functionalization. Their unique physical and chemical properties make them promising candidates for the sensor applications. This review offers detailed discussion of sensing applications (strain sensor, biosensor, small molecule detection, food preservative detection, toxicity biomarker detection, and gas sensor). Various sensing applications of CNF like human motion monitoring and energy storage and conversion are discussed in brief. The challenges and obstacles associated with CNFs for futuristic applications are discussed. This review will be helpful for readers to understand the different fabrication methods and explore various applications of the versatile CNFs.

Insight into the effects of the crystal phase of Ru over ultrathin Ru@Pt core-shell nanosheets for methanol electrooxidation

Coating a second metal on the surface of ultrathin 2D nanosheets (NSs) could induce lattice strain and modify the electronic structure, thereby changing the surface reactivity. Herein, we report the effects of different crystal phases of Ru on the electrocatalytic performance of ultrathin Ru@Pt core-shell NSs for the methanol oxidation reaction (MOR). Importantly, Ru with a novel face-centered-cubic phase was found to have more effect on the electronic structure of Pt than Ru with a conventional hexagonal close-packed phase, thereby leading to improved electrocatalytic activity toward the MOR under acidic and basic conditions. It is believed that the strategy presented here would offer a new approach to the construction of bimetallic core-shell nanostructures with various promising applications.

Phase-Controlled Synthesis of Ru Nanocrystals via Template-Directed Growth: Surface Energy versus Bulk Energy

Despite the successful control of crystal phase using template-directed growth, much remains unknown about the underlying mechanisms. Here, we demonstrate that the crystal phase taken by the deposited metal depends on the lateral size of face-centered cubic (fcc)-Pd nanoplate templates with 12 nm plates giving fcc-Ru while 18-26 nm plates result in hexagonal closed-packed (hcp)-Ru. Although Ru overlayers with a metastable fcc- (high in bulk energy) or stable hcp-phase (low in bulk energy) can be epitaxially deposited on the basal planes, the lattice mismatch will lead to jagged hcp- (high in surface energy) and smooth fcc-facets (low in surface energy), respectively, on the side faces. As the proportion of basal and side faces on the nanoplates varies with lateral size, the crystal phase will change depending on the relative contributions from the surface and bulk energies. The Pd@fcc-Ru outperforms the Pd@hcp-Ru nanoplates toward ethylene glycol and glycerol oxidation reactions.

A cellulose nanocrystal templating approach to synthesize size-controlled gold nanoparticles with high catalytic activity

Advanced templating methods have shown precise regulation of the micro/nanostructures of inorganic catalysts. Here, on the basis of controlled self-assembly and micro-structures of cellulose nanocrystals (CNCs), a new bio-mass-mediated templating approach is proposed to control the growth of gold nanoparticles (Au NPs). The catalytic performance of the as-prepared Au NPs was evaluated using p-nitrophenol as a model pollutant. TEM, POM, zeta-potential, and rheological measurements were conducted to investigate the structure and catalytic activity of the nano-materials. By regulating the chiral nematic liquid crystal texture formed by the self-assembly of CNCs, the size of Au NPs could be adjusted at the nanoscale dimension, from 1.38 ± 0.38 nm to 4.25 ± 1.24 nm. Depending on the Au size, a high catalytic effect, namely, 98.0% conversion rate, was obtained within 30 min. The conversion rate was maintained at 97.0% even after 3-run cyclic application. Such findings demonstrate the potential of using CNCs as a bio-template to control the growth of nanomaterials.

Surface Molecular Functionalization of Unusual Phase Metal Nanomaterials for Highly Efficient Electrochemical Carbon Dioxide Reduction under Industry-Relevant Current Density

The electrochemical carbon dioxide reduction reaction (CO₂ RR) provides a sustainable strategy to relieve global warming and achieve carbon neutrality. However, the practical application of CO₂ RR is still limited by the poor selectivity and low current density. Here, the surface molecular functionalization of unusual phase metal nanomaterials for high-performance CO₂ RR under industry-relevant current density is reported. It is observed that 5-mercapto-1-methyltetrazole (MMT)-modified 4H/face-centered cubic (fcc) gold (Au) nanorods demonstrate greatly enhanced CO₂ RR performance than original oleylamine (OAm)-capped 4H/fcc Au nanorods in both an H-type cell and flow cell. Significantly, MMT-modified 4H/fcc Au nanorods deliver an excellent carbon monoxide selectivity of 95.6% under the industry-relevant current density of 200 mA cm^-2 . Density functional theory calculations reveal distinct electronic modulations by surface ligands, in which MMT improves while OAm suppresses the surface electroactivity of 4H/fcc Au nanorods. Furthermore, this method can be extended to various MMT derivatives and conventional fcc Au nanostructures in boosting CO₂ RR performance.

Advances in design and applications of polymer brush modified anisotropic particles

Current advancements in the creation of anisotropy in particles and their surface modification with polymer brushes have established a new class of hybrid materials termed polymer brush modified anisotropic particles (PBMAP). PBMAPs display unique property combinations, e.g., multi-functionality in multiple directions along with smart behavior, which is not easily achievable in traditional hybrid materials. Typically, anisotropic particles can be categorized based on three different factors, such as shape anisotropy (geometry driven), compositional anisotropy (functionality driven), and surface anisotropy (spatio-selective surface modification driven). In this review, we have particularly focused on the synthetic strategies to construct the various type of PBMAPs based on inorganic or organic core which may or may not be isotropic in nature, and their applications in various fields ranging from drug delivery to catalysis. In addition, superior performances and fascinating properties of PBMAPs over their isotropic analogues are also highlighted. A brief overview of their future developments and associated challenges have been discussed at the end.

An Ideal Catalyst Carrier: Patchy Nanoparticles with Dual Functional Domains of Substrates Enrichment and Catalysis

The surface of PMMA@PIL-PA patchy nanoparticles is segmented to PMMA and PIL-PA two domains. The hydrophobic PMMA domain can enrich water-insoluble substrate, while the hydrophilic PIL-PA one catalyzes the reaction...

Optimized colloidal growth of hexagonal close-packed Ag microparticles and their stability under catalytic conditions

The colloidal synthesis of hcp silver microparticles is optimized by tuning the chemical reduction kinetics and the surface stabilization during synthesis.

Synthesis of Pd3 Sn and PdCuSn Nanorods with L12 Phase for Highly Efficient Electrocatalytic Ethanol Oxidation

The crystal phase of nanomaterials is one of the key parameters determining their physicochemical properties and performance in various applications. However, it still remains a great challenge to synthesize nanomaterials with different crystal phases while maintaining the same composition, size, and morphology. Here, a facile, one-pot, wet-chemical method is reported to synthesize Pd₃ Sn nanorods with comparable size and morphology but different crystal phases, that is, an ordered intermetallic and a disordered alloy with L1₂ and face-centered cubic (fcc) phases, respectively. The crystal phase of the as-synthesized Pd₃ Sn nanorods is easily tuned by altering the types of tin precursors and solvents. Moreover, the approach can also be used to synthesize ternary PdCuSn nanorods with the L1₂ crystal phase. When used as electrocatalysts, the L1₂ Pd₃ Sn nanorods exhibit superior electrocatalytic performance toward the ethanol oxidation reaction (EOR) compared to their fcc counterpart. Impressively, compared to the L1₂ Pd₃ Sn nanorods, the ternary L1₂ PdCuSn nanorods exhibit more enhanced electrocatalytic performance toward the EOR, yielding a high mass current density up to 6.22 A mg_Pd ^-1 , which is superior to the commercial Pd/C catalyst and among the best reported Pd-based EOR electrocatalysts.

Synergistic roles of vapor- and liquid-phase epitaxy in the seed-mediated synthesis of substrate-based noble metal nanostructures

Colloidal growth modes reliant on the replication of the crystalline character of a preexisting seed through homoepitaxial or heteroepitaxial depositions have enriched both the architectural diversity and functionality of noble metal nanostructures. Equivalent syntheses, when practiced on seeds formed on a crystalline substrate, must reconcile with the fact that the substrate enters the syntheses as a chemically distinct bulk-scale component that has the potential to impose its own epitaxial influences. Herein, we provide an understanding of the formation of epitaxial interfaces within the context of a hybrid growth mode that sees substrate-based seeds fabricated at high temperatures in the vapor phase on single-crystal oxide substrates and then exposed to a low-temperature liquid-phase synthesis yielding highly faceted nanostructures with a single-crystal character. Using two representative syntheses in which gold nanoplates and silver-platinum core-shell structures are formed, it is shown that the hybrid system behaves unconventionally in terms of epitaxy in that the substrate imposes an epitaxial relationship on the seed but remains relatively inactive as the metal seed imposes an epitaxial relationship on the growing nanostructure. With epitaxy transduced from substrate to seed to nanostructure through what is, in essence, a relay system, all of the nanostructures formed in a given synthesis end up with the same crystallographic orientation relative to the underlying substrate. This work advances the use of substrate-induced epitaxy as a synthetic control in the fabrication of on-chip devices reliant on the collective response of identically aligned nanostructures.

Facile Synthesis of Palladium-Based Nanocrystals with Different Crystal Phases and a Comparison of Their Catalytic Properties

A relatively unexplored aspect of noble-metal nanomaterials is polymorphism, or their ability to crystallize in different crystal phases. Here, a method is reported for the facile synthesis of Ru@Pd core-shell nanocrystals featuring polymorphism, with the core made of hexagonally close-packed (hcp)-Ru while the Pd shell takes either an hcp or face-centered cubic (fcc) phase. The polymorphism shows a dependence on the shell thickness, with shells thinner than ≈1.4 nm taking the hcp phase whereas the thicker ones revert to fcc. The injection rate provides an experimental knob for controlling the phase, with one-shot and drop-wise injection of the Pd precursor corresponding to fcc-Pd and hcp-Pd shells, respectively. When these nanocrystals are tested as catalysts toward formic acid oxidation, the Ru@Pd_hcp nanocrystals outperform Ru@Pd_fcc in terms of both specific activity and peak potential. Density functional theory calculations are also performed to elucidate the origin of this performance enhancement.

Hierarchical Fe-Mn binary metal oxide core-shell nano-polyhedron as a bifunctional electrocatalyst for efficient water splitting

Electrochemical water splitting is convinced as one of the most promising solutions to combat the energy crisis. The exploitation of efficient hydrogen and oxygen evolution reaction (HER/OER) bifunctional electrocatalysts is undoubtedly a vital spark yet challenging for imperative green sustainable energy. Herein, through introducing a simple pH regulated redox reaction into a tractable hydrothermal procedure, a hierarchical Fe₃O₄@MnO_x binary metal oxide core-shell nano-polyhedron was designed by evolving MnO_x wrapped Fe₃O₄. The MnO_x effectively prevents the agglomeration and surface oxidation of Fe₃O₄ nano-particles and increases the electrochemically active sites. Benefiting from the generous active sites and synergistic effects of Fe₃O₄ and MnO_x, the Fe₃O₄@MnO_x-NF nanocomposite implements efficient HER/OER bifunctional electrocatalytic performance and overall water splitting. As a result, hierarchical Fe₃O₄@MnO_x only requires a low HER/OER overpotential of 242/188 mV to deliver 10 mA cm^-2, a small Tafel slope of 116.4/77.6 mV dec^-1, combining a long-term cyclability of 5 h. Impressively, by applying Fe₃O₄@MnO_x as an independent cathode and anode, the overall water splitting cell supplies a competitive voltage of 1.64 V to achieve 10 mA cm^-2 and super long cyclability of 80 h. These results reveal that this material is a promising candidate for practical water electrolysis application.

Monoatomic Platinum-Embedded Hexagonal Close-Packed Nickel Anisotropic Superstructures as Highly Efficient Hydrogen Evolution Catalyst

The rational design of platinum (Pt) based nanostructures with specific crystal structure plays a significant role in their diverse applications. Herein, the anisotropic superstructures (ASs) of monoatomic Pt-embedded hexagonal close-packed nickel (hcp Ni) nanosheets were successfully synthesized for efficient hydrogen evolution in which an unusual dissociation-diffusion-desorption mechanism played a crucial role. The overpotential for the Pt/Ni ASs to reach the specific current density (10 mA cm^-2) is 28.0 mV, which is much lower than that of conventional Pt/C catalyst (71.0 mV). Moreover, at the overpotential of 100 mV, the mass activity of 30.2 A mg_Pt^-1 for the Pt/Ni ASs is 1060% greater than that in conventional Pt/C catalyst (2.6 A mg_Pt^-1). This work provides a new approach to synthesize highly anisotropic superstructures embedded with monoatomic noble metals to boost their hopeful applications in catalytic applications.

Emerging two-dimensional nanomaterials for electrochemical nitrogen reduction

Ammonia (NH₃) is essential to serve as the biological building blocks for maintaining organism function, and as the indispensable nitrogenous fertilizers for increasing the yield of nutritious crops. The current Haber-Bosch process for industrial NH₃ production is highly energy- and capital-intensive. In light of this, the electroreduction of nitrogen (N₂) into valuable NH₃, as an alternative, offers a sustainable pathway for the Haber-Bosch transition, because it utilizes renewable electricity and operates under ambient conditions. Identifying highly efficient electrocatalysts remains the priority in the electrochemical nitrogen reduction reaction (NRR), marking superior selectivity, activity, and stability. Two-dimensional (2D) nanomaterials with sufficient exposed active sites, high specific surface area, good conductivity, rich surface defects, and easily tunable electronic properties hold great promise for the adsorption and activation of nitrogen towards sustainable NRR. Therefore, this Review focuses on the fundamental principles and the key metrics being pursued in NRR. Based on the fundamental understanding, the recent efforts devoted to engineering protocols for constructing 2D electrocatalysts towards NRR are presented. Then, the state-of-the-art 2D electrocatalysts for N₂ reduction to NH₃ are summarized, aiming at providing a comprehensive overview of the structure-performance relationships of 2D electrocatalysts towards NRR. Finally, we propose the challenges and future outlook in this prospective area.

Surface lattice engineering for fine-tuned spatial configuration of nanocrystals

Hybrid nanocrystals combining different properties together are important multifunctional materials that underpin further development in catalysis, energy storage, et al., and they are often constructed using heterogeneous seeded growth. Their spatial configuration (shape, composition, and dimension) is primarily determined by the heterogeneous deposition process which depends on the lattice mismatch between deposited material and seed. Precise control of nanocrystals spatial configuration is crucial to applications, but suffers from the limited tunability of lattice mismatch. Here, we demonstrate that surface lattice engineering can be used to break this bottleneck. Surface lattices of various Au nanocrystal seeds are fine-tuned using this strategy regardless of their shape, size, and crystalline structure, creating adjustable lattice mismatch for subsequent growth of other metals; hence, diverse hybrid nanocrystals with fine-tuned spatial configuration can be synthesized. This study may pave a general approach for rationally designing and constructing target nanocrystals including metal, semiconductor, and oxide.

Building biointegration of Fe2O3-FeOOH coated titanium implant by regulating NIR irradiation in an infected model

Killing bacteria, eliminating biofilm and building soft tissue integration are very important for percutaneous implants which service in a complicated environment. In order to endow Ti implants with above abilities, multifunctional coatings consisted of Fe₂O₃–FeOOH nanograins as an outer layer and Zn doped microporous TiO₂ as an inner layer were fabricated by micro-arc oxidation, hydrothermal treatment and annealing treatment. The microstructures, physicochemical properties and photothermal response of the coatings were observed; their antibacterial efficiencies and cell response in vitro as well as biofilm elimination and soft tissue integration in vivo were evaluated. The results show that with the increased annealing temperature, coating morphologies didn't change obviously, but lattices of β-FeOOH gradually disorganized into amorphous state and rearranged to form Fe₂O_3. The coating annealed at 450 °C (MA450) had nanocrystallized Fe₂O₃ and β-FeOOH. With a proper NIR irradiation strategy, MA450 killed adhered bacteria efficiently and increased fibroblast behaviors via up-regulating fibrogenic-related genes in vitro; in an infected model, MA450 eliminated biofilm, reduced inflammatory response and improved biointegration with soft tissue. The good performance of MA450 was due to a synergic effect of photothermal response and released ions (Zn²⁺ and Fe³⁺).

•

Nanocrystallized Fe₂O₃–FeOOH layer endows Ti with good photothermal response.

•

With NIR irradiation, Fe₂O₃–FeOOH layer improves biointegration in an infected model.

•

Photothermal response combined with released ions gives implants good performance.

Efficient and additive-free synthesis of morphology variant iron oxyhydroxide nanostructures for phosphate adsorption application

Iron oxyhydroxide (FeOOH) nanostructures of different shapes were successfully synthesized on flexible textile cloth of polyester using a novel and simple technique based on hydrolysis method. The technique used herein is newly designed specifically to improve the efficiency in terms of energy, simplicity and cost involved in large scale synthesis of nanostructured thin films. Additionally, the morphology of nano-sized iron oxyhydroxide could be tuned into different shapes through variation in the type of precursors used for synthesis. The uniformity and adhesion of the depositions were also found to be excellent as examined by qualitative techniques. The as-deposited samples exhibited monoclinic and orthorhombic structures of FeOOH. A significant variation in the shape of as-deposited FeOOH nanostructures with change in precursor was observed through morphological studies, which displayed lance-shaped, rounded clusters and rod-like growth features in different cases. The nanocrystalline FeOOH can be directly applied to attract and trap phosphate from water reservoirs, thus contributing to environmental solutions. The proposed technique can also be utilized to deposit larger areas, which could be suitable for practical applications.

Transition metal-based catalysts for electrochemical water splitting at high current density: current status and perspectives

As a clean energy carrier, hydrogen has priority in decarbonization to build sustainable and carbon-neutral economies due to its high energy density and no pollutant emission upon combustion. Electrochemical water splitting driven by renewable electricity to produce green hydrogen with high-purity has been considered to be a promising technology. Unfortunately, the reaction of water electrolysis always requires a large excess potential, let alone the large-scale application (e.g., >500 mA cm^-2 needs a cell voltage range of 1.8-2.4 V). Thus, developing cost-effective and robust transition metal electrocatalysts working at high current density is imperative and urgent for industrial electrocatalytic water splitting. In this review, the strategies and requirements for the design of self-supported electrocatalysts are summarized and discussed. Subsequently, the fundamental mechanisms of water electrolysis (OER or HER) are analyzed, and the required important evaluation parameters, relevant testing conditions and potential conversion in exploring electrocatalysts working at high current density are also introduced. Specifically, recent progress in the engineering of self-supported transition metal-based electrocatalysts for either HER or OER, as well as overall water splitting (OWS), including oxides, hydroxides, phosphides, sulfides, nitrides and alloys applied in the alkaline electrolyte at large current density condition is highlighted in detail, focusing on current advances in the nanostructure design, controllable fabrication and mechanistic understanding for enhancing the electrocatalytic performance. Finally, remaining challenges and outlooks for constructing self-supported transition metal electrocatalysts working at large current density are proposed. It is expected to give guidance and inspiration to rationally design and prepare these electrocatalysts for practical applications, and thus further promote the practical production of hydrogen via electrochemical water splitting.