CuAAC-Based Click Chemistry in Self-Healing Polymers

1,5-disubstituted 1,2,3-triazolylated carbohydrates and nucleosides

In general, 1,5-disubstituted 1,2,3-triazolyl moiety is much less common in the synthesis and applications in comparison to its regioisomeric counterpart. Moreover, the synthesis of 1,5-disubstituted 1,2,3-triazoles are not so straightforward as is the case for copper catalyzed strategy of 1,4-disubstituted 1,2,3-triazoles. The preparation of 1,5-triazolylated carbohydrates and nucleosides are even more complex because of the difficulties in accessing the appropriate starting materials as well as the compatibility of reaction conditions with the various protecting groups. 1,5-Disubstitution regioisomeric triazoles of carbohydrates and nucleosides were traditionally obtained as minor products through straightforward heating of the mixture of azides and terminal alkynes. However, the separation of isomers was tedious or in some cases futile. On the other hand, regioselective synthesis using ruthenium catalysis triggered serious concern of residual metal content in therapeutically important ingredients. Therefore, serious efforts are being made by several groups to develop non-toxic metal based or completely metal-free synthesis of 1,5-disubstituted 1,2,3-triazoles. This article strives to summarize the pre-Click era as well as the post-2001 reports on the synthesis and potential applications of 1,5-disubstituted 1,2,3-triazoles in biological systems.

Accelerated Diffusion of a Copper(I)-Functionalized COF Packed Bed Reactor for Efficient Continuous Flow Catalysis

Flow chemistry provides a neo-orientation for the research and development of chemical technology, in which heterogeneous continuous catalysis based on packed beds can realize rapid separation and recycling. However, options for heterogeneous catalysts are still limited. In this work, we gradually grow covalent organic frameworks (COFs, TpBpy) on the surface of a silica gel (SiO2)-supported substrate to obtain a stable copper(I)-chelated high-loading heterogeneous catalyst (SiO2@CuI-TpBpy). SiO2@CuI-TpBpy shows high catalytic activity in three-component Huisgen 1,3-dipolar cycloaddition, giving the corresponding triazoles with excellent yields and reposeful recyclability under batch conditions. The structures of the catalysts remain steady, and the copper contents are basically unchanged after five cycles. Then, the catalysts are successfully applied for three-component heterogeneous catalysis in a one-pot continuous flow to prepare rufinamide in 89% yield for 24 h stably and efficiently with mere traces of copper ions remaining. More importantly, the catalytic system reveals a minuscule effect of catalyst particle size on internal diffusion. This COF encapsulation strategy presents a new possibility for the design of industrial heterogeneous catalysts with high metal loading and low internal diffusion resistance.

Quaternary-ammonium chitosan, a promising packaging material in the food industry

Quaternary-ammonium chitosan (QAC) is a polysaccharide with good water solubility, bacteriostasis, and biocompatibility. QAC is obtained by methylating or grafting the quaternary-ammonium group of chitosan and is an important compound in the food industry. Various QAC-based complexes have been prepared using reversible intermolecular interactions, such as electrostatic interactions, hydrogen bonding, metal coordination, host-guest interactions, and covalent bonding interactions consisting of Schiff base bonding and dynamic chemical bond cross-linking. In the food industry, QAC is often used as a substrate in film or coating for food preservation and as a carrier for active substances to improve the encapsulation efficiency and storage stability of functional food ingredients. In this review, we have assimilated the latest information on QAC to facilitate further discussions and future research. Advancement in research on QAC would contribute toward technology acceleration and its increased contribution to the field of food technology.

Pyrene Appendant Triazole-based Chemosensors for Sensing Applications

Over the last two decades, the design and development of fluorescent chemosensors for the targeted detection of Heavy Transition-metal (HTM) ions, anions, and biological analytes, have drawn much interest. Since the introduction of click chemistry in 2001, triazole moieties have become an increasingly prominent theme in chemosensors. Triazoles generated via click reactions are crucial for sensing various ions and biological analytes. Recently, the number of studies in the field of pyrene appendant triazole moieties has risen dramatically, with more sophisticated and reliable triazole-containing chemosensors for various analytes of interest described. This tutorial review provides a general overview of pyrene appendant-triazole-based chemosensors that can detect a variety of metal cations, anions, and neutral analytes by using modular click-derived triazoles.

One-pot nucleophilic substitution-double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

The nucleophilic substitution of benzylic bromides with sodium azide was combined with a subsequent copper-catalyzed (3 + 2) cycloaddition with terminal alkynes. This one-pot process was developed with a simple model alkyne, but then applied to more complex alkynes bearing enantiopure 1,2-oxazinyl substituents. Hence, the precursor compounds 1,2-, 1,3- or 1,4-bis(bromomethyl)benzene furnished geometrically differing bis(1,2,3-triazole) derivatives. The use of tris[(1-benzyl-1H-1,2,3-triazol-4-yl)methyl]amine (TBTA) as ligand for the click step turned out to be very advantageous. The compounds with 1,2-oxazinyl end groups can potentially serve as precursors of divalent carbohydrate mimetics, but the reductive cleavage of the 1,2-oxazine rings to aminopyran moieties did not proceed cleanly with these compounds.

Kinetics of Polycycloaddition of Flexible α-Azide-ω-Alkynes Having Different Spacer Length

Two flexible α-azide-ω-alkynes differing in the length of the hydrocarbon spacers (C₈ vs. C₁₂) between functional groups are synthesized. Their bulk polymerization kinetics is studied by differential scanning calorimetry (DSC) and parameterized with the aid of isoconversional methodology. The monomer with a shorter hydrocarbon spacer has somewhat greater reactivity. The effect is traced to a moderate increase in the effective value of the preexponential factor that arises from the fact that the respective monomer has a higher initial molar concentration in itself. The techniques of GPC and NMR provide additional kinetic and mechanistic insights into the studied reaction.

Self-Healing of a Copper(I) [2]Rotaxane Shuttle Monitored by Fluorescence

We demonstrate self-healing of the shuttling dynamics of a molecular machine operating by negative feedback. When zinc(II) was added to the copper(I)-loaded [2]rotaxane shuttle [Cu(R)]⁺, copper(I) was replaced, thereby generating the static zinc(II)-loaded [2]rotaxane [Zn(R)]²⁺. Loss of the dynamics was accompanied by a fluorescence enhancement at λ = 364 nm. Notably, the released copper(I) ions catalyzed the formation of a bis-triazole ligand, which selectively captured zinc(II). As a result, the copper(I) was restored in the rotaxane, and the dynamic shuttling motion of [Cu(R)]⁺ was regained. The healing was conveniently followed by diagnostic fluorescence changes.

Biobased Transesterification Vitrimers

The rapid increase in the use of plastics and the related sustainability issues, including the depletion of global petroleum reserves, have rightly sparked interest in the use of biobased polymer feedstocks. Thermosets cannot be remolded, processed, or recycled, and hence cannot be reused because of their permanent molecular architecture. Vitrimers have emerged as a novel polymer family capable of bridging the difference between thermoplastic and thermosets. Vitrimers enable unique recycling strategies, however, it is still important to understand where the raw material feedstocks originate from. Transesterification vitrimers derived from renewable resources are a massive opportunity, however, limited research has been conducted in this specific family of vitrimers. This review article provides a comprehensive overview of transesterification vitrimers produced from biobased monomers. The focus is on the biomass structural suitability with dynamic covalent chemistry, as well as the viability of the synthetic methods.

Artificial clickase-triggered fluorescence "turn on" based on a click bio-conjugation strategy for the immunoassay of food allergenic protein

Herein, based on an artificial clickase-catalyzed bio-conjugation strategy, we established a sensitive fluorescent clickase-linked immunosorbent assay (FCLISA) platform using an oligonucleotide-molecular beacon (Oligo-MB) hairpin structure as a fluorescence switch for detection of food allergenic protein. Firstly, a highly stable Cu(I)-containing nanocube was prepared for usage as an artificial clickase, which could catalyze the bio-conjugation of two short oligonucleotides (i.e., Oligo-A and Oligo-B labeled by a 5'-alkyne and a 3'-azide group, respectively) through clickase-catalyzed azide/alkyne cycloaddition reaction. Subsequently, the formed long-chain oligonucleotide (Oligo-A-B) could hybridize with Oligo-MB hairpin to open hairpin structure, leading to its fluorescence turn on. By using clickase as an alternative enzymatic label in conventional ELISAs, the established FCLISA showed high sensitivity and accuracy in detection of casein, achieving a limit of detection as low as 1.5 × 10^-8 g/mL. Additionally, FCLISA has been challenged by detecting the casein in real samples, indicating a great potential in food safety assay.

Tackling Antibiotic Resistance: Influence of Aliphatic Branches on Broad-Spectrum Antibacterial Polytriazoles against ESKAPE Group Pathogens

One of the most important threats to public health is the appearance of multidrug-resistant pathogenic bacteria, since they are the cause of a high number of deaths worldwide. Consequently, the preparation of new effective antibacterial agents that do not generate antimicrobial resistance is urgently required. We report on the synthesis of new linear cationic antibacterial polytriazoles that could be a potential source of new antibacterial compounds. These polymers were prepared by thermal- or copper-catalyzed click reactions of azide and alkyne functions. The antibacterial activity of these materials can be modulated by varying the size or nature of their side chains, as this alters the hydrophilic/hydrophobic balance. Antibacterial activity was tested against pathogens of the ESKAPE group. The P3TD polymer, which has butylated side chains, was found to have the highest bactericidal activity. The toxicity of selected polytriazoles was investigated using human red blood cells and a human gingival fibroblast cell line. The propensity of prepared polytriazoles to induce resistance in certain bacteria was studied. Some of them were found to not produce resistance in methicillin-resistant Staphylococcus aureus or Pseudomonas aeruginosa. The interaction of these polytriazoles with the Escherichia coli membrane produces both depolarization and disruption of the membrane.

A click chemistry amplified nanopore assay for ultrasensitive quantification of HIV-1 p24 antigen in clinical samples

Despite major advances in HIV testing, ultrasensitive detection of early infection remains challenging, especially for the viral capsid protein p24, which is an early virological biomarker of HIV-1 infection. Here, To improve p24 detection in patients missed by immunological tests that dominate the diagnostics market, we show a click chemistry amplified nanopore (CAN) assay for ultrasensitive quantitative detection. This strategy achieves a 20.8 fM (0.5 pg/ml) limit of detection for HIV-1 p24 antigen in human serum, demonstrating 20~100-fold higher analytical sensitivity than nanocluster-based immunoassays and clinically used enzyme-linked immunosorbent assay, respectively. Clinical validation of the CAN assay in a pilot cohort shows p24 quantification at ultra-low concentration range and correlation with CD4 count and viral load. We believe that this strategy can improve the utility of p24 antigen in detecting early infection and monitoring HIV progression and treatment efficacy, and also can be readily modified to detect other infectious diseases.

Effect of backbone flexibility on covalent template-directed synthesis of linear oligomers

Covalent template-directed synthesis can be used to replicate synthetic oligomers, but success depends critically on the conformational properties of the backbone. Here we investigate how the choice of monomer building block affects the flexibility of the backbone and in turn the efficiency of the replication process for a series of different triazole oligomers. Two competing reaction pathways were identified for monomers attached to a template, resulting in the formation of either macrocyclic or linear products. For flexible backbones, macrocycles and linear oligomers are formed at similar rates, but a more rigid backbone gave exclusively the linear product. The experimental results are consistent with ring strain calculations using molecular mechanics: products with low ring strain (20-30 kJ mol^-1) formed rapidly, and products with high ring strain (>100 kJ mol^-1) were not observed. Template-directed replication of linear oligomers requires monomers that rigid enough to prevent the formation of undesired macrocycles, but not so rigid that the linear templating pathway leading to the duplex is inhibited. Molecular mechanics calculations of ring strain provide a straightforward tool for assessing the flexibility of potential backbones and the viability different monomer designs before embarking on synthesis.

Copper-catalyzed asymmetric propargylic substitution with salicylaldehyde-derived imine esters

Copper-catalyzed asymmetric propargylic substitution with salicylaldehyde-derived imine esters and propargylic carbonates has been successfully realized, generating a wide range of chiral amino acid derivatives containing propargylic groups with excellent results (up to 95% yield and 94% ee). The ortho-hydroxy group of the salicylaldehyde-derived imine esters is crucial to increase the reactivity and stabilize the azomethine ylide, which may be due to the formation of an intramolecular hydrogen bond between the hydroxyl group and the imine group. A series of synthetic transformations were carried out to access other important chiral compounds, which displayed the synthetic versatility.

Smart Clothing Framework for Health Monitoring Applications

Wearable technologies are making a significant impact on people’s way of living thanks to the advancements in mobile communication, internet of things (IoT), big data and artificial intelligence. Conventional wearable technologies present many challenges for the continuous monitoring of human health conditions due to their lack of flexibility and bulkiness in size. Recent development in e-textiles and the smart integration of miniature electronic devices into textiles have led to the emergence of smart clothing systems for remote health monitoring. A novel comprehensive framework of smart clothing systems for health monitoring is proposed in this paper. This framework provides design specifications, suitable sensors and textile materials for smart clothing (e.g., leggings) development. In addition, the proposed framework identifies techniques for empowering the seamless integration of sensors into textiles and suggests a development strategy for health diagnosis and prognosis through data collection, data processing and decision making. The conceptual technical specification of smart clothing is also formulated and presented. The detailed development of this framework is presented in this paper with selected examples. The key challenges in popularizing smart clothing and opportunities of future development in diverse application areas such as healthcare, sports and athletics and fashion are discussed.

Azide-alkyne cycloadditions with an electronically activated alkyne: indole formation via 1-aryl-1,2,3-triazole-derived imino carbenes

We report that the use of a diaminoalkyne in the azide-alkyne cycloaddition with aryl azides leads to 3H-indoles under mild, uncatalysed conditions. Computations reveal that N₂ extrusion from, in one case, isolable triazoles is facile, generating imino carbenes, which undergo intramolecular aryl C-H bond activation and give 3H-indoles as products.

Progress in Utilizing Dynamic Bonds to Fabricate Structurally Adaptive Self-Healing, Shape Memory, and Liquid Crystal Polymers

Stimuli-responsive structurally dynamic polymers are capable of mimicking the biological systems to adapt themselves to the surrounding environmental changes and subsequently exhibiting a wide range of responses ranging from self-healing to complex shape-morphing. Dynamic self-healing polymers (SHPs), shape-memory polymers (SMPs) and liquid crystal elastomers (LCEs), which are three representative examples of stimuli-responsive structurally dynamic polymers, have been attracting broad and growing interest in recent years because of their potential applications in the fields of electronic skin, sensors, soft robots, artificial muscles, and so on. We review recent advances and challenges in the developments towards dynamic SHPs, SMPs and LCEs, focusing on the chemistry strategies and the dynamic reaction mechanisms that enhance the performances of the materials including self-healing, reprocessing and reprogramming. We compare and discuss the different dynamic chemistries and their mechanisms on the enhanced functions of the materials, where three summary tables are presented: a library of dynamic bonds and the resulting characteristics of the materials. Finally, we provide a critical outline of the unresolved issues and future perspectives on the emerging developments. This article is protected by copyright. All rights reserved.

Covalent Surface Modification of Ti3C2Tx MXene with Chemically Active Polymeric Ligands Producing Highly Conductive and Ordered Microstructure Films

As interest continues to grow in Ti₃C₂T_x and other related MXenes, advancement in methods of manipulation of their surface functional groups beyond synthesis-based surface terminations (T_x: -F, -OH, and ═O) can provide mechanisms to enhance solution processability as well as produce improved solid-state device architectures and coatings. Here, we report a chemically important surface modification approach in which "solvent-like" polymers, polyethylene glycol carboxylic acid (PEG6-COOH), are covalently attached onto MXenes via esterification chemistry. Surface modification of Ti₃C₂T_x with PEG6-COOH with large ligand loading (up to 14% by mass) greatly enhances dispersibility in a wide range of nonpolar organic solvents (e.g., 2.88 mg/mL in chloroform) without oxidation of Ti₃C₂T_x two-dimensional flakes or changes in the structure ordering. Furthermore, cooperative interactions between polymer chains improve the nanoscale assembly of uniform microstructures of stacked MXene-PEG6 flakes into ordered thin films with excellent electrical conductivity (∼16,200 S·cm^-1). Most importantly, our covalent surface modification approach with ω-functionalized PEG6 ligands (ω-PEG6-COOH, where ω: -NH₂, -N₃, -CH═CH₂) allows for control over the degree of functionalization (incorporation of valency) of MXene. We believe that installing valency onto MXenes through short, ion conducting PEG ligands without compromising MXenes' features such as solution processability, structural stability, and electrical conductivity further enhance MXenes surface chemistry tunability and performance and widens their applications.

Single nanoparticle identification coupled with auto-identify algorithm for rapid and accurate detection of L-histidine

In this work, an auto-identify sensor was constructed for rapid and high-precision detection of L-histidine. The proposed strategy is based on the auto-identify algorithm and the aggregation of alkynyl and azide functionalized gold nanoparticles induced by the Cu⁺ catalyzed azides and alkynes cycloaddition (CuAAC) reaction. Specially, the color of scattering light spots for the aggregated gold nanoparticle (AuNPs) caused by CuAAC reaction was quite different from that of the monomers. However, L-histidine can bind to Cu²⁺ and inhibits the production of Cu⁺, hence preventing the aggregation of AuNPs. Therefore, there is a distinct change of color as the addition of L-histidine under dark-field microscopy. Then, L-histidine can be quantitatively detected by combining the color change with the Meanshift algorithm accurately and automatically. Such proposed method has been successfully applied for the detection of L-histidine in serum sample with satisfying result.

Click reaction in the synthesis of dendrimer drug-delivery systems

Drug delivery systems are technologies designed for the targeted delivery and controlled release of medicinal agents. Among the materials employed as drug delivery systems, dendrimers have gained increasing interest in recent years because of their properties and structural characteristics. The use of dendrimer-nanocarrier formulations enhances the safety and bioavailability, increases the solubility in water, improves stability and pharmacokinetic profile, and enables efficient delivery of the target drug to a specific site. However, the synthesis of dendritic architectures through convergent or divergent methods has drawbacks and limitations that disrupt aspects related to design and construction and consequently slow down the transfer from academia to industry. In that sense, the implementation of click chemistry has been received increasing attention in the last years, because offers new efficient approaches to obtain dendritic species in good yields and higher monodispersity. This review focuses on recent strategies for building dendrimer drug delivery systems using click reactions from 2015 to early 2021. The dendritic structures showed in this review are based on β-cyclodextrins (β-CD), poly(amidoamine) (PAMAM), dendritic poly (lysine) (PLLD), dimethylolpropionic acid (bis-MPA), phosphoramidate (PAD), and poly(propargyl alcohol-4-mercaptobutyric (PPMA).

Highly Efficient Modular Construction of Functional Drug Delivery Platform Based on Amphiphilic Biodegradable Polymers via Click Chemistry

Amphiphilic copolymers with pendant functional groups in polyester segments are widely used in nanomedicine. These enriched functionalities are designed to form covalent conjugates with payloads or provide additional stabilization effects for encapsulated drugs. A general method is successfully developed for the efficient preparation of functional biodegradable PEG-polyester copolymers via click chemistry. Firstly, in the presence of mPEG as initiator, Sn(Oct)2-catalyzed ring-opening polymerization of the α-alkynyl functionalized lactone with D,L-lactide or ε-caprolactone afforded linear mPEG-polyesters bearing multiple pendant alkynyl groups. Kinetic studies indicated the formation of random copolymers. Through copper-catalyzed azide-alkyne cycloaddition reaction, various small azido molecules with different functionalities to polyester segments are efficiently grafted. The molecular weights, polydispersities and grafting efficiencies of azido molecules of these copolymers were investigated by NMR and GPC. Secondly, it is demonstrated that the resulting amphiphilic functional copolymers with low CMC values could self-assemble to form nanoparticles in aqueous media. In addition, the in vitro degradation study and cytotoxicity assays indicated the excellent biodegradability and low cytotoxicity of these copolymers. This work provides a general approach toward the preparation of functional PEG-polyester copolymers in a quite efficient way, which may further facilitate the application of functional PEG-polyesters as drug delivery materials.

Chemically Triggered Click and Declick Reactions: Application in Synthesis and Degradation of Thermosetting Plastics

In this Letter, we report that two amines can be coupled together rapidly and quantitatively through amine-thiol scrambling using a bisvinylogous thioester conjugate acceptor under mild conditions. The resulting bisvinylogous amide conjugate acceptors can be decoupled via an ethylene diamine-induced cyclization. Four representative conjugate acceptors have been utilized in the couple-decouple reactions, which were monitored and characterized by nuclear magnetic resonance, high-resolution mass spectrometry, and UV-vis spectroscopy. Further, we applied these small-molecule-based "click-declick" reactions to polymer synthesis and degradation. Highly cross-linked polymers, i.e., plastics, were quantitatively synthesized by simple reactions between commercial tris(2-aminoethyl)amine and the conjugate acceptors without solvent and any initiator or catalyst through ball milling within 60 min. Significantly, these thermosetting plastics can be degraded within 3-24 h via addition of ethylene diamine. The multiple architectures, application to plastics synthesis, and chemically triggered clean degradation to the thermosets at mild conditions with little input of energy herald a new generation of "intelligent" materials.

In situ activation of therapeutics through bioorthogonal catalysis

Bioorthogonal chemistry refers to any chemical reactions that can occur inside of living systems without interfering with native biochemical processes, which has become a promising strategy for modulating biological processes. The development of synthetic metal-based catalysts to perform bioorthogonal reactions has significantly expanded the toolkit of bioorthogonal chemistry for medicinal chemistry and synthetic biology. A wide range of homogeneous and heterogeneous transition metal catalysts (TMCs) have been reported, mediating different transformations such as cycloaddition reactions, as well as bond forming and cleaving reactions. However, the direct application of 'naked' TMCs in complex biological media poses numerous challenges, including poor water solubility, toxicity and catalyst deactivation. Incorporating TMCs into nanomaterials to create bioorthogonal nanocatalysts can solubilize and stabilize catalyst molecules, with the decoration of the nanocatalysts used to provide spatiotemporal control of catalysis. This review presents an overview of the advances in the creation of bioorthogonal nanocatalysts, highlighting different choice of nano-scaffolds, and the therapeutic and diagnostic applications.

Prevent or Cure-The Unprecedented Need for Self-Reporting Materials

Self-reporting smart materials are highly relevant in modern soft matter materials science, as they allow for the autonomous detection of changes in synthetic polymers, materials, and composites. Despite critical advantages of such materials, for example, prolonged lifetime or prevention of disastrous material failures, they have gained much less attention than self-healing materials. However, as diagnosis is critical for any therapy, it is of the utmost importance to report the existence of system changes and their exact location to prevent them from spreading. Thus, we herein critically review the chemistry of self-reporting soft matter materials systems and highlight how current challenges and limitations may be overcome by successfully transferring self-reporting research concepts from the laboratory to the real world. Especially in the space of diagnostic self-reporting systems, the recent SARS-CoV-2 (COVID-19) pandemic indicates an urgent need for such concepts that may be able to detect the presence of viruses or bacteria on and within materials in a self-reporting fashion.

Transitional Metal-Based Noncatalytic Medicine for Tumor Therapy

Nanocatalytic medicine has been emerging as a highly promising strategy for cancer therapeutics since it enables tumor suppression by in situ generating toxic agents within tumors through catalytic reactions without using conventional highly toxic and nonselective chemodrugs. In the last several years, a number of nanocatalytic medicines have been used to steer catalytic reactions in endogenous or exogenous stimuli-activated cancer therapy, such as chemodynamic therapy, photodynamic therapy, and sonodynamic therapy. In particular, transitional metal-based nanocatalytic medicines with excellent catalytic activity and selectivity show significant clinical potentials, and significant progress has been achieved very recently. In this review, three types of typical transitional metal (Fe, Mn, and Cu)-based nanocatalytic medicines are summarized, followed by detailed discussions on their catalytic mechanisms. Of note, the obstacles and challenges that will be encountered in the design and further clinical conversion of transitional metal-based nanocatalytic medicine in the future are also outlooked.

Bioinspired Artificial "Clickase" for the Catalytic Click Immunoassay of Foodborne Pathogens

The copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) click reaction has drawn increasing attention in the field of analytical science. However, the poor stability of Cu(I) usually hinders not only the simplicity of the click reaction but also its applications in precise analyses. Therefore, the development of a nanocatalyst containing stable Cu(I) is of great significance for broadening the application of CuAAC-based assays. Herein, inspired by the active center structure of natural multicopper oxidases (MCOs), we successfully prepared a novel nanocatalyst containing abundant stable Cu(I) as an artificial "clickase" (namely, CCN) by using glutathione to stabilize Cu(I). The stability and enzyme-like catalytic activity in the CuAAC reaction of the prepared CCN clickase were studied, and the catalytic mechanism of the CCN clickase-mediated CuAAC reaction between 3-azide-7-hydroxycoumarin (Azide 1) and propargyl alcohol (Alkyne 2) was also revealed. Compared with the existing solid CuO nanocatalysts used in CuAAC-based assays, CCN clickases exhibited plenty of superior properties (including high stability, excellent catalytic activity, no requirements of dissolution and reducing agents/radical initiator during the detection, well-defined porosities benefiting the substrate diffusion, and good biocompatibility), which can greatly increase the reaction efficiency and shorten the detection time. Encouraged by these remarkable performances, CCN clickases were used as labels to establish a new catalytic click fluorescence immunoassay for foodborne pathogens. Notably, the proposed CCN clickase-based immunoassay exhibited high analytical performances for the quantification of Salmonella enteritidis in the linear range of 10²-10⁶ CFU/mL with a limit of detection as low as 11 CFU/mL. The developed method has also been used in the determination of S. enteritidis in food samples, showing its great potential in the detection of foodborne pathogens.

Single-Molecule Activation and Quantification of Mechanically Triggered Palladium-Carbene Bond Dissociation

Metal-complexed N-heterocyclic carbene (NHC) mechanophores are latent reactants and catalysts for a range of mechanically driven chemical responses, but mechanochemical scission of the metal-NHC bond has not been experimentally characterized. Here we report the single-molecule force spectroscopy of ligand dissociation from a pincer NHC-pyridine-NHC Pd(II) complex. The force-coupled rate constant for ligand dissociation reaches 50 s^-1 at forces of approximately 930 pN. Experimental and computational observations support a dissociative, rather than associative, mechanism of ligand displacement, with rate-limiting scission of the Pd-NHC bond followed by rapid dissociation of the pyridine moiety from Pd.

Fabrication of copper(II)-coated magnetic core-shell nanoparticles Fe3O4@SiO2-2-aminobenzohydrazide and investigation of its catalytic application in the synthesis of 1,2,3-triazole compounds

In the present work, an attempt has been made to synthesize the 1,2,3-triazole derivatives resulting from the click reaction, in a mild and green environment using the new copper(II)-coated magnetic core-shell nanoparticles Fe3O4@SiO2 modified by isatoic anhydride. The structure of the catalyst has been determined by XRD, FE-SEM, TGA, VSM, EDS, and FT-IR analyzes. The high efficiency and the ability to be recovered and reused for at least up to 6 consecutive runs are some superior properties of the catalyst.

A Survey of Strain-Promoted Azide-Alkyne Cycloaddition in Polymer Chemistry

Highly efficient reactions that enable the assembly of molecules into complex structures have driven extensive progress in synthetic chemistry. In particular, reactions that occur under mild conditions and in benign solvents, while producing no by-products and rapidly reach completion are attracting significant attention. Amongst these, the strain-promoted azide-alkyne cycloaddition, involving various cyclooctyne derivatives reacting with azide-bearing molecules, has gained extensive popularity in organic synthesis and bioorthogonal chemistry. This reaction has also recently gained momentum in polymer chemistry, where it has been used to decorate, link, crosslink, and even prepare polymer chains. This survey highlights key achievements in the use of this reaction to produce a variety of polymeric constructs for disparate applications.

Chelation-Assisted Interrupted Copper(I)-Catalyzed Azide-Alkyne-Azide Domino Reactions: Synthesis of Fully Substituted 5-Triazenyl-1,2,3-triazoles

We describe the synthesis of 1,4-(disubstituted)-5-triazenyl-1,2,3-triazoles through a ligand-free domino copper(I)-catalyzed azide-alkyne-azide process of chelating aryl azides bearing N-P═O, P═O, and SO₃H groups at the ortho position with a wide variety of acetylenes. DFT calculations reveal that Cu-chelation is a crucial factor in the interception of the CuAAC intermediate by the azide. The crystal structure of the catalytic species has been determined by X-ray diffraction.

Triazolization of Enolizable Ketones with Primary Amines: A General Strategy toward Multifunctional 1,2,3-Triazoles

The development of metal-free syntheses toward 1,2,3-triazoles has been a burgeoning research area throughout the past decade. Despite the numerous advances, the scarceness of methods for the preparation of 1,5-disubstituted 1,2,3-triazoles from readily available substrates remained a challenge that was addressed by our group in 2016. A metal-free three-component reaction, which we have dubbed the triazolization reaction, was established for the rapid synthesis of 1,5-disubstituted, fully functionalized and NH-1,2,3-triazoles. This novel approach stands out because it utilizes widely available starting materials, namely primary amines and enolizable ketones. Furthermore, the broad substrate scope is a major advantage, and was further expanded by the number of modified protocols that have been reported. Triazolization products have successfully found utility as intermediates in various synthetic transformations, and were the subject of a few interesting biological activity studies.

A 3D-Printed Self-Adhesive Bandage with Drug Release for Peripheral Nerve Repair

Peripheral nerve injury is a common disease that often causes disability and challenges surgeons. Drug-releasable biomaterials provide a reliable tool to regulate the nerve healing-associated microenvironment for nerve repair. Here, a self-adhesive bandage is designed that can form a wrap surrounding the injured nerve to promote nerve regeneration and recovery. Via a 3D printing technique, the bandage is prepared with a special structure and made up of two different hydrogel layers that can adhere to each other by a click reaction. The nanodrug is encapsulated in one layer with a grating structure. Wrapping the injured nerve, the grating layer of the bandage is closed to the injured site. The drug can be mainly released to the inner area of the wrap to promote the nerve repair by improving the proliferation and migration of Schwann cells. In this study, the bandage is used to assist the neurorrhaphy for the treatment of complete sciatic nerve transection without obvious defect in rats. Results indicate that the self-adhesive capacity can simplify the installation process and the drug-loaded bandage can promote the repairing of injured nerves. The demonstrated 3D-printed self-adhesive bandage has potential application in assisting the neurorrhaphy for nerve repair.

Water-Compatible Synthesis of 1,2,3-Triazoles under Ultrasonic Conditions by a Cu(I) Complex-Mediated Click Reaction

A new monophosphine Cu(I) complex bearing bis(pyrazolyl)methane (L 1 ) (CuIL 1 PPh 3 ) was synthesized and used as a catalyst for the three-component click reaction from an alkyl halide, sodium azide, and terminal alkyne to furnish 1,4-disubstituted 1,2,3-triazoles in up to 93% yield. The catalyst is highly stable, compatible with oxygen/water, and works with total efficiency under ultrasonic condition. The structure of the complex was studied and confirmed by X-ray crystallography, finding a riveting relationship with its catalytic activity. This sustainable triazoles synthesis is distinguished by its high atom economy, low catalyst loading (up to 0.5 mol %), broad substrate scope, short reaction times, operational simplicity, and an easy gram-scale supply of a functionalized product for subsequent synthetic applications.

Cycloaddition of Strained Cyclic Alkenes and Ortho-Quinones: A Distortion/Interaction Analysis

The chemistry of strained unsaturated cyclic compounds has experienced remarkable growth in recent years via the development of metal–free click reactions. Among these reactions, the cycloaddition of cyclopropenes and their analogues to ortho-quinones has been established as a highly promising click reaction. The present work investigates the mechanism involved in the cycloaddition of strained dienes to ortho-quinones and structural factors that would influence this reaction. For this purpose, we use B97D density functional theory calculations throughout, and for relevant cases, we use spin component–scaled MP2 calculations and single–point domain-based local pair natural orbital coupled cluster (DLPNO-CCSD(T)) calculations. The outcomes are analyzed in detail using the distortion/interaction model, and suggestions for future experimental work are made.