Molecular Control of Heterogeneous Electrocatalysis through Graphite Conjugation

Interfacial Electrochemistry of Catalyst-Coordinated Graphene Nanoribbons

The immobilization of molecular electrocatalysts on conductive electrodes is an appealing strategy for enhancing their overall activity relative to those of analogous molecular compounds. In this study, we report on the interfacial electrochemistry of self-assembled two-dimensional nanosheets of graphene nanoribbons (GNR-2DNS) and analogs containing a Rh-based hydrogen evolution reaction (HER) catalyst (RhGNR-2DNS) immobilized on conductive electrodes. Proton-coupled electron transfer (PCET) taking place at N-centers of the nanoribbons was utilized as an indirect reporter of the interfacial electric fields experienced by the monolayer nanosheet located within the electric double layer. The experimental Pourbaix diagrams were compared with a theoretical model, which derives the experimental Pourbaix slopes as a function of parameter f, a fraction of the interfacial potential drop experienced by the redox-active group. Interestingly, our study revealed that GNR-2DNS was strongly coupled to glassy carbon electrodes (f = 1), while RhGNR-2DNS was not (f = 0.15). We further investigated the HER mechanism by RhGNR-2DNS using electrochemical and X-ray absorption spectroelectrochemical methods and compared it to homogeneous molecular model compounds. RhGNR-2DNS was found to be an active HER electrocatalyst over a broader set of aqueous pH conditions than its molecular analogs. We find that the improved HER performance in the immobilized catalyst arises due to two factors. First, redox-active bipyrimidine-based ligands were shown to dramatically alter the activity of Rh sites by increasing the electron density at the active Rh center and providing RhGNR-2DNS with improved catalysis. Second, catalyst immobilization was found to prevent catalyst aggregation that was found to occur for the molecular analog in the basic pH. Overall, this study provides valuable insights into the mechanism by which catalyst immobilization can affect the overall electrocatalytic performance.

Redox-Active Organic Materials: From Energy Storage to Redox Catalysis

Electroactive materials are central to myriad applications, including energy storage, sensing, and catalysis. Compared to traditional inorganic electrode materials, redox-active organic materials such as porous organic polymers (POPs) and covalent organic frameworks (COFs) are emerging as promising alternatives due to their structural tunability, flexibility, sustainability, and compatibility with a range of electrolytes. Herein, we discuss the challenges and opportunities available for the use of redox-active organic materials in organoelectrochemistry, an emerging area in fine chemical synthesis. In particular, we highlight the utility of organic electrode materials in photoredox catalysis, electrochemical energy storage, and electrocatalysis and point to new directions needed to unlock their potential utility for organic synthesis. This Perspective aims to bring together the organic, electrochemistry, and polymer communities to design new heterogeneous electrocatalysts for the sustainable synthesis of complex molecules.

Insight into Impacts of π-π Assembly on Phthalocyanine Based Heterogeneous Molecular Electrocatalysis

Electrochemical CO2 reduction (CO2R) to feedstocks competes with the hydrogen evolution reaction (HER). Cobalt phthalocyanine (CoPc) immobilized onto carbon driven by π-π interaction represents a classical type of heterogeneous molecular catalyst for CO2R. However, the impacts of π conjugation on the electrocatalysis have not been clarified. Herein, the electrochemical properties of CoPc were investigated by comparison of its analogue to 2,3-naphthalocyanine cobalt (NapCo) having extended π conjugation. It is found that CoPc is redox-active on carbon to provide low oxidized Co sites for improving the CO2R activity and selectivity, while NapCo on carbon turned out to be redox-inert leading to lower performance. In addition, the redox-mediated mechanism for CO2R on CoPc tends to operate with increasing electrolyte alkalinity, which further enhances the reaction selectivity. We speculated that moderate π conjugation allows the redox-mediated mechanism on CoPc, which is critical to promote CO2R performance while depressing the competing HER.

Nanostructured electrocatalysts for organic synthetic transformations

Organic chemists have made and are still making enormous efforts toward the development of novel green catalytic synthesis. The necessity arises from the imperative of safeguarding human health and the environment, while ensuring efficient and sustainable chemical production. Within this context, electrocatalysis provides a framework for the design of new organic reactions under mild conditions. Undoubtedly, nanostructured materials are under the spotlight as the most popular and in most cases efficient platforms for advanced organic electrosynthesis. This Minireview focuses on the recent developments in the use of nanostructured electrocatalysts, highlighting the correlation between their chemical structures and resulting catalytic abilities, and pointing to future perspectives for their application in cutting-edge areas.

A molecular-level mechanistic framework for interfacial proton-coupled electron transfer kinetics

Electrochemical proton-coupled electron transfer (PCET) reactions can proceed via an outer-sphere electron transfer to solution (OS-PCET) or through an inner-sphere mechanism by interfacial polarization of surface-bound active sites (I-PCET). Although OS-PCET has been extensively studied with molecular insight, the inherent heterogeneity of surfaces impedes molecular-level understanding of I-PCET. Herein we employ graphite-conjugated carboxylic acids (GC-COOH) as molecularly well-defined hosts of I-PCET to isolate the intrinsic kinetics of I-PCET. We measure I-PCET rates across the entire pH range, uncovering a V-shaped pH-dependence that lacks the pH-independent regions characteristic of OS-PCET. Accordingly, we develop a mechanistic model for I-PCET that invokes concerted PCET involving hydronium/water or water/hydroxide donor/acceptor pairs, capturing the entire dataset with only four adjustable parameters. We find that I-PCET is fourfold faster with hydronium/water than water/hydroxide, while both reactions display similarly high charge transfer coefficients, indicating late proton transfer transition states. These studies highlight the key mechanistic distinctions between I-PCET and OS-PCET, providing a framework for understanding and modelling more complex multistep I-PCET reactions critical to energy conversion and catalysis.

How Precisely Can Individual Molecules Be Analyzed? A Case Study on Locally Quantifying Forces and Energies Using Scanning Probe Microscopy

Recent advances in scanning probe microscopy methodology have enabled the measurement of tip-sample interactions with picometer accuracy in all three spatial dimensions, thereby providing a detailed site-specific and distance-dependent picture of the related properties. This paper explores the degree of detail and accuracy that can be achieved in locally quantifying probe-molecule interaction forces and energies for adsorbed molecules. Toward this end, cobalt phthalocyanine (CoPc), a promising CO2 reduction catalyst, was studied on Ag(111) as a model system using low-temperature, ultrahigh vacuum noncontact atomic force microscopy. Data were recorded as a function of distance from the surface, from which detailed three-dimensional maps of the molecule's interaction with the tip for normal and lateral forces as well as the tip-molecule interaction potential were constructed. The data were collected with a CO molecule at the tip apex, which enabled a detailed visualization of the atomic structure. Determination of the tip-substrate interaction as a function of distance allowed isolation of the molecule-tip interactions; when analyzing these in terms of a Lennard-Jones-type potential, the atomically resolved equilibrium interaction energies between the CO tethered to the tip and the CoPc molecule could be recovered. Interaction energies peaked at less than 160 meV, indicating a physisorption interaction. As expected, the interaction was weakest at the aromatic hydrogens around the periphery of the molecule and strongest surrounding the metal center. The interaction, however, did not peak directly above the Co atom but rather in pockets surrounding it.

Controlling Nucleation Sites for Metal Oxide Film Growth on Glassy Carbon via Electrochemical Preoxidation

Coating electrode materials with metal oxide thin films can improve the performance of electrocatalysts and charge storage materials. Atomic layer deposition (ALD) enables the deposition of conformal, uniform films on a wide range of electrodes; however, an even film depends on the availability of nucleation sites directly on the electrode surface. Here, we show that the electrochemical oxidation of glassy carbon electrodes prior to the deposition of alumina thin films by ALD leads to more uniform electrochemically passivating films. Cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) demonstrate that film uniformity increases with the increasing potential of preoxidation until 2.50 V versus Ag/AgCl, at which point the films are fully passivating and appear continuous by SEM. Further increasing the potential of preoxidation leads to uniform but less consistently passivating alumina films. These findings show that electrochemical preoxidation is a rapid and readily tunable strategy for controlling oxygenic nucleation sites and therefore the growth of thin metal oxide films on glassy carbon electrodes.

Proton Relay for the Rate Enhancement of Electrochemical Hydrogen Reactions at Heterogeneous Interfaces

Proton transfer is critically important to many electrocatalytic reactions, and directed proton delivery could open new avenues for the design of electrocatalysts. However, although this approach has been successful in molecular electrocatalysis, proton transfer has not received the same attention in heterogeneous electrocatalyst design. Here, we report that a metal oxide proton relay can be built within heterogeneous electrocatalyst architectures and improves the kinetics of electrochemical hydrogen evolution and oxidation reactions. The volcano-type relationship between activity enhancement and pKa of amine additives confirms this improvement; we observe maximum rate enhancement when the pKa of a proton relay matches the pH of the electrolyte solution. Density-functional-theory-based reactivity studies reveal a decreased proton transfer energy barrier with a metal oxide proton relay. These findings demonstrate the possibility of controlling the proton delivery and enhancing the reaction kinetics by tuning the chemical properties and structures at heterogeneous interfaces.

Electrocatalytic Hydrogen Evolution using a Nickel-based Calixpyrrole Complex: Controlling the Secondary Coordination Sphere on an Electrode Surface

Incorporating design elements from homogeneous catalysts to construct well defined active sites on electrode surfaces is a promising approach for developing next generation electrocatalysts for energy conversion reactions. Furthermore, if functionalities that control the electrode microenvironment could be integrated into these active sites it would be particularly appealing. In this context, a square planar nickel calixpyrrole complex, Ni(DPMDA) (DPMDA=2,2'-((diphenylmethylene)bis(1H-pyrrole-5,2-diyl))bis(methaneylylidene))bis(azaneylylidene))dianiline) with pendant amine groups is reported that forms a heterogeneous hydrogen evolution catalyst using anilinium tetrafluoroborate as the proton source. The supported Ni(DPMDA) catalyst was surprisingly stable and displayed fast reaction kinetics with turnover frequencies (TOF) up to 25,900 s-1 or 366,000 s-1  cm-2 . Kinetic isotope effect (KIE) studies revealed a KIE of 5.7, and this data, combined with Tafel slope analysis, suggested that a proton-coupled electron transfer (PCET) process involving the pendant amine groups was rate-limiting. While evidence of an outer-sphere reduction of the Ni(DPMDA) catalyst was observed, it is hypothesized that the control over the secondary coordination sphere provided by the pendant amines facilitated such high TOFs and enabled the PCET mechanism. The results reported herein provide insight into heterogeneous catalyst design and approaches for controlling the secondary coordination sphere on electrode surfaces.

Pyrazine-linked Iron-coordinated Tetrapyrrole Conjugated Organic Polymer Catalyst with Spatially Proximate Donor-Acceptor Pairs for Oxygen Reduction in Fuel Cells

Nitrogen-coordinated iron (Fe-N4 ) materials represent the most promising non-noble electrocatalysts for the cathodic oxygen reduction reaction (ORR) of fuel cells. However, molecular-level structure design of Fe-N4 electrocatalyst remains a great challenge. In this study, we develop a novel Fe-N4 conjugated organic polymer (COP) electrocatalyst, which allows for precise design of the Fe-N4 structure, leading to unprecedented ORR performance. At the molecular level, we have successfully organized spatially proximate iron-pyrrole/pyrazine (FePr/Pz) pairs into fully conjugated polymer networks, which in turn endows FePr sites with firmly covalent-bonded matrix, strong d-π electron coupling and highly dense distribution. The resulting pyrazine-linked iron-coordinated tetrapyrrole (Pz-FeTPr) COP electrocatalyst exhibits superior performance compared to most ORR electrocatalysts, with a half-wave potential of 0.933 V and negligible activity decay after 40,000 cycles. When used as the cathode electrocatalyst in a hydroxide exchange membrane fuel cell, the Pz-FeTPr COP achieves a peak power density of ≈210 mW cm-2 . We anticipate the COP based Fe-N4 catalyst design could be an effective strategy to develop high-performance catalyst for facilitating the progress of fuel cells.

A Comprehensive Review on Electrocatalytic Applications of 2D Metallenes

This review introduces metallenes, a cutting-edge form of atomically thin two-dimensional (2D) metals, gaining attention in energy and catalysis. Their unique physicochemical and electronic properties make them promising for applications like catalysis. Metallenes stand out due to their abundance of under-coordinated metal atoms, enhancing the catalytic potential by improving atomic utilization and intrinsic activity. This review explores the utility of 2D metals as electrocatalysts in sustainable energy conversion, focusing on the Oxygen Evolution Reaction, Oxygen Reduction Reaction, Fuel Oxidation Reaction, and Carbon Dioxide Reduction Reaction. Aimed at researchers in nanomaterials and energy, the review is a comprehensive resource for unlocking the potential of 2D metals in creating a sustainable energy landscape.

Main group elements in electrochemical hydrogen evolution and carbon dioxide reduction

Main-group elements are renowned for their versatile reactivities in organometallic chemistry, including CO2 insertion and H2 activation. However, electrocatalysts comprising a main-group element active site have not yet been widely developed for activating CO2 or producing H2. Recently, research has focused on main-group element-based electrocatalysts that are active in redox systems related to fuel-forming reactions. These studies have determined that the catalytic performances of heavier main-group element-based electrocatalysts are often similar to those of transition-metal-based electrocatalysts. Our group has recently reported the scope of including the main-group elements in the design of molecular catalysts and explored their applications in redox catalysis, such as the generation of H2 upon coupling of two protons (H+) and two electrons (e-). This feature article summarizes our research efforts in developing molecular electrocatalysts comprising main-group elements at their active sites. Furthermore, we highlight their influence on the rate-determining step, thereby enhancing the reaction rate and product selectivity for multi-H+/multi-e- transfer catalysis. Particularly, we focus on the performance of our recently reported molecular Sn- or Sb-centered macrocycles for electrocatalytic H2 evolution reaction (HER) and on how their mechanisms resemble those of transition-metal-based electrocatalysts. Moreover, we discuss the CO2 reduction reaction (CO2RR), another promising fuel-forming reaction, and emphasize the recent progress in including the main-group elements in the CO2RR. Although the main-group elements are found at the active sites of the molecular catalysts and are embedded in the electrode materials for studying the HER, molecular catalysts bearing main-group elements are not commonly used for CO2RR. However, the main-group elements assist the CO2RR by acting as co-catalysts. For example, alkali and alkaline earth metal ions (e.g., Li+, Na+, K+, Rb+, Cs+, Mg2+, Ca2+, and Ba2+) are known for their Lewis acidities, which influence the thermodynamic landscape of the CO2RR and product selectivity. In contrast, the elements in groups 13, 14, and 15 are primarily used as dopants in the preparation of catalytic materials. Overall, this article identifies main-group element-based molecular electrocatalysts and materials for HER and CO2RR.

Parallel paired electrolysis-enabled asymmetric catalysis: simultaneous synthesis of aldehydes/aryl bromides and chiral alcohols

Metal-catalyzed asymmetric electro-reductive couplings have emerged as a powerful tool for organic synthesis, wherein a sacrificial anode is typically required. Herein, a parallel paired electrolysis (PPE)-enabled asymmetric catalysis has been developed, and the alcohols and ketones could be simultaneously converted to the corresponding aldehydes and chiral tertiary alcohols with high yields and enantioselectivity in an undivided cell. Additionally, this Ni-catalyzed asymmetric reductive coupling can well match the anodic oxidative C-H bond bromination of (hetero)arenes. This protocol opens an alternative avenue for organic synthesis.

Creating Conjugated C-C Bonds between Commercial Carbon Electrode and Molecular Catalyst for Oxygen Reduction to Hydrogen Peroxide

Immobilizing molecular catalysts on electrodes is vital for electrochemical applications. However, creating robust electrode-catalyst interactions while maintaining good catalytic performance and rapid electron transfer is challenging. Here, without introducing any foreign elements, we show a bottom-up synthetic approach of constructing the conjugated C-C bond between the commercial Vulcan carbon electrode and an organometallic catalyst. Characterization results from FTIR, XPS, aberration-corrected TEM and EPR confirmed the successful and uniform heterogenization of the complex. The synthesized Vulcan-LN4 -Co catalyst is highly active and selective in the oxygen reduction reaction in neutral media, showing an 80 % hydrogen peroxide selectivity and a 0.72 V (vs. RHE) onset potential which significantly outperformed the homogenous counterpart. Based on single-crystal XRD and NMR data, we built a model for density functional theory calculations which showed a nearly optimal binding energy for the *OOH intermediate. Our results show that the direct conjugated C-C bonding is an effective approach for heterogenizing molecular catalysts on carbon, opening new opportunities for employing molecular catalysts in electrochemical applications.

Visualizing the role of applied voltage in non-metal electrocatalysts

Understanding how applied voltage drives the electrocatalytic reaction at the nanoscale is a fundamental scientific problem, particularly in non-metallic electrocatalysts, due to their low intrinsic carrier concentration. Herein, using monolayer molybdenum disulfide (MoS2) as a model system of non-metallic catalyst, the potential drops across the basal plane of MoS2 (ΔVsem) and the electric double layer (ΔVedl) are decoupled quantitatively as a function of applied voltage through in-situ surface potential microscopy. We visualize the evolution of the band structure under liquid conditions and clarify the process of EF keeping moving deep into Ec, revealing the formation process of the electrolyte gating effect. Additionally, electron transfer (ET) imaging reveals that the basal plane exhibits high ET activity, consistent with the results of surface potential measurements. The potential-dependent behavior of kf and ns in the ET reaction are further decoupled based on the measurements of ΔVsem and ΔVedl. Comparing the ET and hydrogen evolution reaction imaging results suggests that the low electrocatalytic activity of the basal plane is mainly due to the absence of active sites, rather than its electron transfer ability. This study fills an experimental gap in exploring driving forces for electrocatalysis at the nanoscale and addresses the long-standing issue of the inability to decouple charge transfer from catalytic processes.

Ethanol Upgrading to n-Butanol Using Transition-Metal-Incorporated Poly(triazine)imide Frameworks

The upgrading of ethanol to n-butanol was performed using a molecular catalyst integrated into a carbon nitride support, one of the first examples of a supported molecular catalyst performing the Guerbet process. Initial studies using crystalline poly(triazine)imide (PTI) with lithium or transition-metal cations imbedded in the support together with a base as the catalyst system did not produce any significant amounts of n-butanol. However, when using the catalyst material formed by treatment of PTI-LiCl with [(Cp*)IrCl₂]₂ (Cp* = pentamethylcyclopentadienyl) along with sodium hydroxide, a 59% selectivity for butanol (13% yield) was obtained at 145 °C. This PTI-(Cp*)Ir material exhibited distinct UV-vis absorption features and powder X-ray diffractions which differ from those of the parent PTI-LiCl and [(Cp*)IrCl₂]₂. The PTI-(Cp*)Ir material was found to have a metal loading of 27% iridium per empirical unit of the framework. Along with the formation of n-butanol from the Guerbet reaction, the presence of higher chain alcohols was also observed.

Concerted Proton-Coupled Electron Transfer to a Graphite Adsorbed Metalloporphyrin Occurs by Band to Bond Electron Redistribution

Surface immobilized catalysts are highly promising candidates for a range of energy conversion reactions, and atomistic mechanistic understanding is essential for their rational design. Cobalt tetraphenylporphyrin (CoTPP) nonspecifically adsorbed on a graphitic surface has been shown to undergo concerted proton-coupled electron transfer (PCET) in aqueous solution. Herein, density functional theory calculations on both cluster and periodic models representing π-stacked interactions or axial ligation to a surface oxygenate are performed. As the electrode surface is charged due to applied potential, the adsorbed molecule experiences the electrical polarization of the interface and nearly the same electrostatic potential as the electrode, regardless of the adsorption mode. PCET occurs by electron abstraction from the surface to the CoTPP concerted with protonation to form a cobalt hydride, thereby circumventing Co(II/I) redox. Specifically, the Co(II) d-state localized orbital interacts with a proton from solution and an electron from the delocalized graphitic band states to produce a Co(III)-H bonding orbital below the Fermi level, corresponding to redistribution of electrons from the band states to the bonding states. These insights have broad implications for electrocatalysis by chemically modified electrodes and surface immobilized catalysts.

Efficient Voltage-Driven Oxidation of Water and Alcohols by an Organic Molecular Catalyst Directly Attached to a Carbon Electrode

The integration of heterogeneous electrocatalysis and molecular catalysis is a promising approach to designing new catalysts for the oxygen evolution reaction (OER) and other processes. We recently showed that the electrostatic potential drop across the double layer contributes to the driving force for electron transfer between a dissolved reactant and a molecular catalyst immobilized directly on the electrode surface. Here, we report high current densities and low onset potentials for water oxidation attained using a metal-free voltage-assisted molecular catalyst (TEMPO). Scanning electrochemical microscopy (SECM) was used to analyze the products and determine faradic efficiencies for the generation of H₂O₂ and O₂. The same catalyst was employed for efficient oxidations of butanol, ethanol, glycerol, and H₂O₂. DFT calculations show that the applied voltage alters the electrostatic potential drop between TEMPO and the reactant as well as chemical bonding between them, thereby increasing the reaction rate. These results suggest a new route for designing next-generation hybrid molecular/electrocatalysts for OER and alcohol oxidations.

Rational design of heterogenized molecular phthalocyanine hybrid single-atom electrocatalyst towards two-electron oxygen reduction

Single-atom catalysts supported on solid substrates have inspired extensive interest, but the rational design of high-efficiency single-atom catalysts is still plagued by ambiguous structure determination of active sites and its local support effect. Here, we report hybrid single-atom catalysts by an axial coordination linkage of molecular cobalt phthalocyanine with carbon nanotubes for selective oxygen reduction reaction by screening from a series of metal phthalocyanines via preferential density-functional theory calculations. Different from conventional heterogeneous single-atom catalysts, the hybrid single-atom catalysts are proven to facilitate rational screening of target catalysts as well as understanding of its underlying oxygen reduction reaction mechanism due to its well-defined active site structure and clear coordination linkage in the hybrid single-atom catalysts. Consequently, the optimized Co hybrid single-atom catalysts exhibit improved 2e^- oxygen reduction reaction performance compared to the corresponding homogeneous molecular catalyst in terms of activity and selectivity. When prepared as an air cathode in an air-breathing flow cell device, the optimized hybrid catalysts enable the oxygen reduction reaction at 300 mA cm^-2 exhibiting a stable Faradaic efficiency exceeding 90% for 25 h.

Approaching Molecular Definition on Oxide-Supported Single-Atom Catalysts

ConspectusSingle-atom catalysts (SACs) offer unique advantages such as high (noble) metal utilization through maximum possible dispersion, large metal-support contact areas, and oxidation states usually unattainable in classic nanoparticle catalysis. In addition, SACs can serve as models for determining active sites, a simultaneously desired as well as elusive target in the field of heterogeneous catalysis. Due to the complexity of heterogeneous catalysts bearing a variety of different sites on metal particles and the respective support as well as at their interface, studies of intrinsic activities and selectivities remain largely inconclusive. While SACs could close this gap, many supported SACs remain intrinsically ill-defined due to complexities arising from the variety of different adsorption sites for atomically dispersed metals, hampering the establishment of meaningful structure-activity correlations. In addition to overcoming this limitation, well-defined SACs could even be utilized to shed light on fundamental phenomena in catalysis that remain ambiguous when studies are obscured by the complexity of heterogeneous catalysts.In this Account, we describe approaches to break down the complexity of supported single-atom catalysts through the careful choice of oxide supports with specific binding motives as well as the adsorption of well-defined ligands such as ionic liquids on single metal sites. An example of molecularly defined oxide supports is polyoxometalates (POMs), which are metal oxo clusters with precisely known composition and structure. POMs exhibit a limited number of sites to anchor atomically dispersed metals such as Pt, Pd, and Rh. Polyoxometalate-supported single-atom catalysts (POM-SACs) thus represent ideal systems for the in situ spectroscopic study of single atom sites during reactions as, in principle, all sites are identical and thus equally active in catalytic reactions. We have utilized this benefit in studies of the mechanism of CO and alcohol oxidation reactions as well as the hydro(deoxy)genation of various biomass-derived compounds. More so, the redox properties of polyoxometalates can be finely tuned by changing the composition of the support while keeping the geometry of the single-atom active site largely constant. We further developed soluble analogues of heterogeneous POM-SACs, opening the door to advanced liquid-phase nuclear magnetic resonance (NMR) and UV-vis techniques but, in particular, to electrospray ionization mass spectrometry (ESI-MS) which proves powerful in determining catalytic intermediates as well as their gas-phase reactivity. Employing this technique, we were able to resolve some of the long-standing questions about hydrogen spillover, demonstrating the broad utility of studies on defined model catalysts.

In situ x-ray absorption investigations of a heterogenized molecular catalyst and its interaction with a carbon nanotube support

A highly active heterogenized molecular CO₂ reduction catalyst on a conductive carbon support is investigated to identify if its improved catalytic activity can be attributed to strong electronic interactions between catalyst and support. The molecular structure and electronic character of a [Re⁺¹(tBu-bpy)(CO)₃Cl] (tBu-bpy = 4,4'-tert-butyl-2,2'-bipyridine) catalyst deposited on multiwalled carbon nanotubes are characterized using Re L₃-edge x-ray absorption spectroscopy under electrochemical conditions and compared to the homogeneous catalyst. The Re oxidation state is characterized from the near-edge absorption region, while structural changes of the catalyst are assessed from the extended x-ray absorption fine structure under reducing conditions. Chloride ligand dissociation and a Re-centered reduction are both observed under applied reducing potential. The results confirm weak coupling of [Re(tBu-bpy)(CO)₃Cl] with the support, since the supported catalyst exhibits the same oxidation changes as the homogeneous case. However, these results do not preclude strong interactions between a reduced catalyst intermediate and the support, preliminarily investigated here using quantum mechanical calculations. Thus, our results suggest that complicated linkage schemes and strong electronic interactions with the initial catalyst species are not required to improve the activity of heterogenized molecular catalysts.

Carbon-Conjugated Co Complexes as Model Electrocatalysts for Oxygen Reduction Reaction

Single-atom catalysts are a family of heterogeneous electrocatalysts widely used in energy storage and conversion. The determination of the local structure of the active metal sites is challenging, which limits the establishment of the reliable structure-property relationship of single-atom catalysts. A carbon black-conjugated complex can be used as the model catalyst to probe the intrinsic activity of metal sites with certain local structures. In this work, we prepared carbon black-conjugated [Co(phenanthroline)Cl2], [Co(o-phenylenediamine)Cl2] and [Co(salophen)]. In these catalysts, the Co complexes with well-defined structures are anchored on the edge of carbon black by pyrazine moieties. The number of electrochemical accessible Co sites can be measured from the area of the redox peaks of pyrazine linkers in the cyclic voltammetry curve. Then, the intrinsic electrocatalytic activity of one Co site can be obtained. The catalytic performances of the three catalysts towards oxygen reduction reaction in alkaline conditions were measured. Carbon black-conjugated [Co(salophen)] showed the highest intrinsic activity with the turnover frequency of 0.72 s−1 at 0.75 V vs. the reversible hydrogen electrode. The strategy developed in this work can be used to explore and verify the possible local structure of active sites proposed for single-atom catalysts.

Near ambient N2 fixation on solid electrodes versus enzymes and homogeneous catalysts

The Mo/Fe nitrogenase enzyme is unique in its ability to efficiently reduce dinitrogen to ammonia at atmospheric pressures and room temperature. Should an artificial electrolytic device achieve the same feat, it would revolutionize fertilizer production and even provide an energy-dense, truly carbon-free fuel. This Review provides a coherent comparison of recent progress made in dinitrogen fixation on solid electrodes, homogeneous catalysts and nitrogenases. Specific emphasis is placed on systems for which there is unequivocal evidence that dinitrogen reduction has taken place. By establishing the cross-cutting themes and synergies between these systems, we identify viable avenues for future research.

Heterogenization of Molecular Electrocatalytic Active Sites through Reticular Chemistry

The electrochemical conversion of small molecules, such as CO₂ , O₂ , and H₂ O, has received significant attention as a potential engine for sustainable life. Metal-organic frameworks (MOFs) are a promising class of electrocatalytic materials for such processes. An attractive aspect of utilizing this class of materials as electrocatalysts is that well-known molecular active sites can be introduced to well-defined crystalline heterogeneous catalytic systems with high tunability. This review offers strategic insights into recent studies on MOF-based electrocatalysts by discussing the notable active sites that have been utilized in both homogeneous and heterogeneous catalysts, while highlighting instances where such active sites have been introduced into MOFs. In addition, material design principles enabling the integration of electrochemically active components with the MOF platform are outlined. Viewpoints on the viability of MOFs as an alternative to currently used electrocatalysts are also discussed. Finally, the future direction of MOF-based electrocatalysis research is established.

Molecular Catalyst Synthesis Strategies to Prepare Atomically Dispersed Fe-N-C Heterogeneous Catalysts

We report a strategy to integrate atomically dispersed iron within a heterogeneous nitrogen-doped carbon (N-C) support, inspired by routes for metalation of molecular macrocyclic iron complexes. The N-C support, derived from pyrolysis of a ZIF-8 metal-organic framework, is metalated via solution-phase reaction with FeCl₂ and tributyl amine, as a Brønsted base, at 150 °C. Fe active sites are characterized by ⁵⁷Fe Mössbauer spectroscopy and aberration-corrected scanning transmission electron microscopy. The site density can be increased by selective removal of Zn²⁺ ions from the N-C support prior to metalation, resembling the transmetalation strategy commonly employed for the preparation of molecular Fe-macrocycles. The utility of this approach is validated by the higher catalytic rates (per total Fe) of these materials relative to established Fe-N-C catalysts, benchmarked using an aerobic oxidation reaction.

Photochemistry Journey to Multielectron and Multiproton Chemical Transformation

The odyssey of photochemistry is accompanied by the journey to manipulate "electrons" and "protons" in time, in space, and in energy. Over the past decades, single-electron (1e^-) photochemical transformations have brought marvelous achievements. However, as each photon absorption typically generates only one exciton pair, it is exponentially challenging to accomplish multielectron and proton photochemical transformations. The multistep differences in thermodynamics and kinetics urgently require us to optimize light harvesting, expedite consecutive electron transfer, manipulate the interaction of catalysts with substrates, and coordinate proton transfer kinetics to furnish selective bond formations. Tandem catalysis enables orchestrating different photochemical events and catalytic transformations from subpicoseconds to seconds, which facilitates multielectron redox chemistries and brings consecutive, value-added reactivities. Joint efforts in molecular and material design, mechanistic understanding, and theoretical modeling will bring multielectron and proton synthetic opportunities for fuels, fertilizers, and chemicals with enhanced versatility, efficiency, selectivity, and scalability, thus taking better advantage of photons (i.e., sunlight) for our sustainable society.

Robust covalent pyrazine anchors forming highly conductive and polarity-tunable molecular junctions with carbon electrodes

In molecular electronics, electrode-molecule anchoring strategies play a crucial role in the design of stable and high-performance functional single-molecule devices. Herein, we employ aromatic pyrazine as anchors to connect a central anthracene molecule to carbon electrodes including graphene and armchair single-walled carbon nanotubes (SWCNTs), and theoretically investigate their atomic structures and electronic transport properties. These molecular junctions can be constructed via condensation reactions of the central molecules terminated with ortho-phenylenediamines with ortho-quinone-functionalized nanogaps of graphene and SWCNT electrodes. With two direct C-N covalent bonds connecting the central molecule site-selectively to carbon electrodes in a coplanar way, pyrazine anchors are advantageous for forming stable and structurally well-defined molecular junctions, being expected to reduce the uncertainty about the electrode-molecule linkage motifs. The junction transport is highly efficient due to the coplanar geometry and the ensuing strong π-type molecule-electrode electronic coupling. Furthermore, our calculations show that molecular junctions with pyrazine anchors and carbon electrodes are usually n-type electronic devices; upon hydrogenation of pyridinic nitrogen atoms, the device polarity can be tuned to p-type, indicating that the pyrazine anchors can also serve as a powerful platform for tailoring in situ the polarity of charge carriers in carbon-electrode molecular electronic devices.

Thermal Hydroquinone Oxidation on Co/N-doped Carbon Proceeds by a Band-Mediated Electrochemical Mechanism

Molecular metal complexes catalyze aerobic oxidation reactions via redox cycling at the metal center to effect sequential activation of O₂ and the substrate. Metal surfaces can catalyze the same transformations by coupling independent half-reactions for oxygen reduction and substrate oxidation mediated via the exchange of band-electrons. Metal- and nitrogen-doped carbons (MNCs) are promising catalysts for aerobic oxidation that consist of molecule-like active sites embedded in conductive carbon hosts. Owing to their combined molecular and metallic features, it remains unclear whether they catalyze aerobic oxidation via the sequential redox cycling pathways of molecules or band-mediated pathways of metals. Herein, we simultaneously track the potential of the catalyst and the rate of turnover of aerobic hydroquinone oxidation on a cobalt-based MNC catalyst in contact with a carbon electrode. By comparing operando measurements of rate and potential with the current-voltage behavior of each constituent half-reaction under identical conditions, we show that these molecular materials can display the band-mediated reaction mechanisms of extended metallic solids. We show that the action of these band-mediated mechanisms explains the fractional reaction orders in both oxygen and hydroquinone, the time evolution of catalyst potential and rate, and the dependence of rate on the overall reaction free energy. Selective poisoning experiments suggest that oxygen reduction proceeds at cobalt sites, whereas hydroquinone oxidation proceeds at native carbon-oxide defects on the MNC catalyst. These findings highlight that molecule-like active sites can take advantage of band-mediated mechanisms when coupled to conductive hosts.

The coordination chemistry of oxide and nanocarbon materials

Understanding how a ligand affects the steric and electronic properties of a metal is the cornerstone of the inorganic chemistry enterprise. What happens when the ligand is an extended surface? This question is central to the design and implementation of state-of-the-art functional materials containing transition metals. This perspective will describe how these two very different sets of extended surfaces can form well-defined coordination complexes with metals. In the Green formalism, functionalities on oxide surfaces react with inorganics to form species that contain X-type or LX-type interactions between the metal and the oxide. Carbon surfaces are neutral L-type ligands; this perspective focuses on carbons that donate six electrons to a metal. The nature of this interaction depends on the curvature, and thereby orbital overlap, between the metal and the extended π-system from the nanocarbon.

Theoretical Modeling of Electrochemical Proton-Coupled Electron Transfer

Proton-coupled electron transfer (PCET) plays an essential role in a wide range of electrocatalytic processes. A vast array of theoretical and computational methods have been developed to study electrochemical PCET. These methods can be used to calculate redox potentials and pK_a values for molecular electrocatalysts, proton-coupled redox potentials and bond dissociation free energies for PCET at metal and semiconductor interfaces, and reorganization energies associated with electrochemical PCET. Periodic density functional theory can also be used to compute PCET activation energies and perform molecular dynamics simulations of electrochemical interfaces. Various approaches for maintaining a constant electrode potential in electronic structure calculations and modeling complex interactions in the electric double layer (EDL) have been developed. Theoretical formulations for both homogeneous and heterogeneous electrochemical PCET spanning the adiabatic, nonadiabatic, and solvent-controlled regimes have been developed and provide analytical expressions for the rate constants and current densities as functions of applied potential. The quantum mechanical treatment of the proton and inclusion of excited vibronic states have been shown to be critical for describing experimental data, such as Tafel slopes and potential-dependent kinetic isotope effects. The calculated rate constants can be used as input to microkinetic models and voltammogram simulations to elucidate complex electrocatalytic processes.

Improving the intrinsic activity of electrocatalysts for sustainable energy conversion: where are we and where can we go?

As we are in the midst of a climate crisis, there is an urgent need to transition to the sustainable production of fuels and chemicals. A promising strategy towards this transition is to use renewable energy for the electrochemical conversion of abundant molecules present in the earth's atmosphere such as H₂O, O₂, N₂ and CO₂, to synthetic fuels and chemicals. A cornerstone to this strategy is the development of earth abundant electrocatalysts with high intrinsic activity towards the desired products. In this perspective, we discuss the importance and challenges involved in the estimation of intrinsic activity both from the experimental and theoretical front. Through a thorough analysis of published data, we find that only modest improvements in intrinsic activity of electrocatalysts have been achieved in the past two decades which necessitates the need for a paradigm shift in electrocatalyst design. To this end, we highlight opportunities offered by tuning three components of the electrochemical environment: cations, buffering anions and the electrolyte pH. These components can significantly alter catalytic activity as demonstrated using several examples, and bring us a step closer towards complete system level optimization of electrochemical routes to sustainable energy conversion.

Free Energies of Proton-Coupled Electron Transfer Reagents and Their Applications

We present an update and revision to our 2010 review on the topic of proton-coupled electron transfer (PCET) reagent thermochemistry. Over the past decade, the data and thermochemical formalisms presented in that review have been of value to multiple fields. Concurrently, there have been advances in the thermochemical cycles and experimental methods used to measure these values. This Review (i) summarizes those advancements, (ii) corrects systematic errors in our prior review that shifted many of the absolute values in the tabulated data, (iii) provides updated tables of thermochemical values, and (iv) discusses new conclusions and opportunities from the assembled data and associated techniques. We advocate for updated thermochemical cycles that provide greater clarity and reduce experimental barriers to the calculation and measurement of Gibbs free energies for the conversion of X to XH_n in PCET reactions. In particular, we demonstrate the utility and generality of reporting potentials of hydrogenation, E°(V vs H₂), in almost any solvent and how these values are connected to more widely reported bond dissociation free energies (BDFEs). The tabulated data demonstrate that E°(V vs H₂) and BDFEs are generally insensitive to the nature of the solvent and, in some cases, even to the phase (gas versus solution). This Review also presents introductions to several emerging fields in PCET thermochemistry to give readers windows into the diversity of research being performed. Some of the next frontiers in this rapidly growing field are coordination-induced bond weakening, PCET in novel solvent environments, and reactions at material interfaces.

Voltage-Driven Molecular Catalysis of Electrochemical Reactions

Heterogeneous electrocatalysis and molecular redox catalysis have developed over several decades as two distinct ways to facilitate charge-transfer processes essential for energy conversion and storage. Whereas electrocatalytic reactions are driven by the applied voltage, molecular catalytic processes are driven by the difference between standard potentials of the catalyst and the reactant. Here, we demonstrate that the rate of electron transfer between a dissolved reactant and a molecular catalyst immobilized directly on the surface of a carbon nanoelectrode is governed by combination of chemical driving force and electrostatic potential drop across the double layer. DFT calculations show that varying the applied voltage alters the potential drop between the surface-bound and dissolved redox species. These results suggest a new route for designing next-generation hybrid molecular/electrocatalysts.

Proton-Coupled Defects Impact O-H Bond Dissociation Free Energies on Metal Oxide Surfaces

Proton-coupled electron transfer (PCET) reactions on metal oxides require coupling between proton transfer at the solid-liquid interface and electron transfer involving defects at or near the band edge. Herein, hybrid functional periodic density functional theory is used to elucidate the impact of proton-coupled defects on the bond dissociation free energies (BDFEs) of O-H bonds on anatase TiO₂ surfaces. These O-H BDFEs are directly related to interfacial PCET thermochemistry. Comparison between geometrically similar O-H bonds associated with different defect types, namely conduction d-band electrons or valence p-band holes, reveals that the BDFEs differ by ∼81 kcal/mol (3.50 eV), comparable to the wide TiO₂ band gap. These differences are shown to be determined primarily by differences in electron transfer driving forces, which are analyzed by using band energies and inner-sphere reorganization energies within a Marcus theory framework. These fundamental insights about the impact of proton-coupled defects on PCET thermochemistry at semiconductor surfaces have broad implications for electrocatalysis.

Concluding remarks: Carbon dioxide utilization: where are we now?… and where are we going?

This publication is reminiscent of the 12 principles of CO2 chemistry as formulated in the first Faraday Discussion on CO2 utilization in 2015. Their visionary significance at the time is brought into context with the current developments in society and industry. "What has changed since then?" and "is our enthusiasm still enough?" are only a few questions that are to be answered in the following from today's perspective. The synergy of the use of carbon dioxide (CCU) with the concepts of green chemistry as well as the connection to the energy sector is demonstrated using selected examples from industry and research.

Electrocatalysis as an enabling technology for organic synthesis

Electrochemistry has recently gained increased attention as a versatile strategy for achieving challenging transformations at the forefront of synthetic organic chemistry. Electrochemistry's unique ability to generate highly reactive radical and radical ion intermediates in a controlled fashion under mild conditions has inspired the development of a number of new electrochemical methodologies for the preparation of valuable chemical motifs. Particularly, recent developments in electrosynthesis have featured an increased use of redox-active electrocatalysts to further enhance control over the selective formation and downstream reactivity of these reactive intermediates. Furthermore, electrocatalytic mediators enable synthetic transformations to proceed in a manner that is mechanistically distinct from purely chemical methods, allowing for the subversion of kinetic and thermodynamic obstacles encountered in conventional organic synthesis. This review highlights key innovations within the past decade in the area of synthetic electrocatalysis, with emphasis on the mechanisms and catalyst design principles underpinning these advancements. A host of oxidative and reductive electrocatalytic methodologies are discussed and are grouped according to the classification of the synthetic transformation and the nature of the electrocatalyst.

Electrocatalytic Isoxazoline-Nanocarbon Metal Complexes

We report the synthesis of new carbon-nanomaterial-based metal chelates that enable effective electronic coupling to electrocatalytic transition metals. In particular, multiwalled carbon nanotubes (MWCNTs) and few-layered graphene (FLG) were covalently functionalized by a microwave-assisted cycloaddition with nitrile oxides to form metal-binding isoxazoline functional groups with high densities. The covalent attachment was evidenced by Raman spectroscopy, and the chemical identity of the surface functional groups was confirmed by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The functional carbon nanomaterials effectively chelate precious metals Ir(III), Pt(II), and Ru(III), as well as earth-abundant metals such as Ni(II), to afford materials with metal contents as high as 3.0 atom %. The molecularly dispersed nature of the catalysts was confirmed by X-ray absorption spectroscopy (XAS) and energy-dispersive X-ray spectroscopy (STEM-EDS) elemental mapping. The interplay between the chelate structure on the graphene surface and its metal binding ability has also been investigated by a combination of experimental and computational studies. The defined ligands on the graphene surfaces enable the formation of structurally precise heterogeneous molecular catalysts. The direct attachment of the isoxazoline functional group on the graphene surfaces provides strong electronic coupling between the chelated metal species and the conductive carbon nanomaterial support. We demonstrate that the metal-chelated carbon nanomaterials are effective heterogeneous catalysts in the oxygen evolution reaction with low overpotentials and tunable catalytic activity.

Vibrational Stark shift spectroscopy of catalysts under the influence of electric fields at electrode-solution interfaces

External control of chemical processes is a subject of widespread interest in chemical research, including control of electrocatalytic processes with significant promise in energy research. The electrochemical double-layer is the nanoscale region next to the electrode/electrolyte interface where chemical reactions typically occur. Understanding the effects of electric fields within the electrochemical double layer requires a combination of synthesis, electrochemistry, spectroscopy, and theory. In particular, vibrational sum frequency generation (VSFG) spectroscopy is a powerful technique to probe the response of molecular catalysts at the electrode interface under bias. Fundamental understanding can be obtained via synthetic tuning of the adsorbed molecular catalysts on the electrode surface and by combining experimental VSFG data with theoretical modelling of the Stark shift response. The resulting insights at the molecular level are particularly valuable for the development of new methodologies to control and characterize catalysts confined to electrode surfaces. This Perspective article is focused on how systematic modifications of molecules anchored to surfaces report information concerning the geometric, energetic, and electronic parameters of catalysts under bias attached to electrode surfaces.

Heterogeneous electrocatalysis: characterization of interfacial electric field within the electrochemical double layer.

Advanced Materials for Energy-Water Systems: The Central Role of Water/Solid Interfaces in Adsorption, Reactivity, and Transport

The structure, chemistry, and charge of interfaces between materials and aqueous fluids play a central role in determining properties and performance of numerous water systems. Sensors, membranes, sorbents, and heterogeneous catalysts almost uniformly rely on specific interactions between their surfaces and components dissolved or suspended in the water-and often the water molecules themselves-to detect and mitigate contaminants. Deleterious processes in these systems such as fouling, scaling (inorganic deposits), and corrosion are also governed by interfacial phenomena. Despite the importance of these interfaces, much remains to be learned about their multiscale interactions. Developing a deeper understanding of the molecular- and mesoscale phenomena at water/solid interfaces will be essential to driving innovation to address grand challenges in supplying sufficient fit-for-purpose water in the future. In this Review, we examine the current state of knowledge surrounding adsorption, reactivity, and transport in several key classes of water/solid interfaces, drawing on a synergistic combination of theory, simulation, and experiments, and provide an outlook for prioritizing strategic research directions.

Incorporating MoO3 Patches into a Ni Oxyhydroxide Nanosheet Boosts the Electrocatalytic Oxygen Evolution Reaction

The electrocatalytic oxygen evolution reaction from H₂O (OER) is essential in a number of areas like electrocatalytic hydrogen production from H₂O. A Ni oxyhydroxide nanosheet (NiNS) is among the most widely studied OER catalysts but still suffers from low activity, sluggish kinetics, and poor stability. Herein, we incorporate MoO₃ patches into NiNS to form a nanosheet with an intimate Ni-Mo interface (NiMoNS) for the OER. The overpotential at 10 mA cm^-2 and Tafel slope on NiMoNS (260 mV, 54.7 mV dec^-1) are lower than those on NiNS (296 mV, 89.3 mV dec^-1), implying that higher activity and faster kinetics are achieved on NiMoNS. There is no change in electrocatalytic efficiency of NiMoNS after 18 h of OER, but the electrocatalytic efficiency of NiNS decreases by 56% after only 8 h of OER. Thus, NiMoNS has better stability. The intimate Ni-Mo interface promotes two-dimensional lateral growth of NiMoNS to form a surface area 1.5 times larger than that of NiNS, and facilitates electron transfer from Ni to Mo. This makes the Ni³⁺/Ni²⁺ ratio on the NiMoNS surface (1.32) higher than that on the NiNS surface (0.68). Moreover, the Ni³⁺/Ni²⁺ ratio on NiMoNS surface increases to 1.81 after 18 h of OER but the Ni³⁺/Ni²⁺ ratio on the NiNS surface decreases to 0.51 after 8 h of OER. Therefore, the NiMoNS surface has more abundant and stable Ni³⁺ sites which are catalytically active toward OER. This could be the reason for the enhanced activity, kinetics, and stability of NiMoNS. The results are very valuable for fabricating more efficient catalysts for electrocatalysis.

Toward a mechanistic understanding of electrocatalytic nanocarbon

Electrocatalytic nanocarbon (EN) is a class of material receiving intense interest as a potential replacement for expensive, metal-based electrocatalysts for energy conversion and chemical production applications. The further development of EN will require an intricate knowledge of its catalytic behaviors, however, the true nature of their electrocatalytic activity remains elusive. This review highlights work that contributed valuable knowledge in the elucidation of EN catalytic mechanisms. Experimental evidence from spectroscopic studies and well-defined molecular models, along with the survey of computational studies, is summarized to document our current mechanistic understanding of EN-catalyzed oxygen, carbon dioxide and nitrogen electrochemistry. We hope this review will inspire future development of synthetic methods and in situ spectroscopic tools to make and study well-defined EN structures.

Reinvigorating electrochemistry education

Electrochemistry is an established discipline with modern frontiers spanning energy conversion and storage, neuroscience, and organic synthesis. In spite of the expanding opportunities for academic and industrial electrochemists, particularly in the growing energy-storage sector, rigorous training of electrochemists is generally lacking at academic institutions in the United States. In this perspective, we highlight the core concepts of electrochemistry and discuss ways in which it has been historically taught. We identify challenges faced when teaching inherently interdisciplinary electrochemical concepts and discuss how technology provides new tools for teaching, such as inexpensive electronics and open-source software, to help address these challenges. Finally, we outline example programs and discuss how new tools and approaches can be brought together to prepare scientists and engineers for careers in electrochemical technology where they can accelerate the research, development, and deployment of the clean energy technology essential to combat climate change in the coming decades.