Novel Aggregation-Enhanced PEC Photosensitizer Based on Electrostatic Linkage of Ionic Liquid with Protoporphyrin IX for Ultrasensitive Detection of Molt-4 Cells

Multipath collaboration-based signal amplification on Z-scheme In2O3/g-C3N4 heterojunction photoelectrode for sensitive photoelectrochemical immunoassay

The ideal photoelectrode and efficient signaling strategy are pivotal to achieve sensitive photoelectrochemical (PEC) analysis. Here, a multipath collaborative signal amplification-based PEC immunosensor was constructed for the ultrasensitive detection of cytokeratin 19 fragment 21-1. Specifically, the photoelectrode fabricated by Z-scheme In2O3/g-C3N4 heterojunction showed enhanced photocurrent intensity in response to visible light. Meanwhile, the signal probe, horseradish peroxidase functionalized dopamine-melanin nanosphere@Au nanoparticles (HRP-Dpa-melanin NS@AuNPs), were introduced into the system. When the target exists, the signal probe can induce multiple quenching of the photocurrent due to the competition of light absorption, steric hindrance and HRP-mediated biocatalytic precipitation, which effectively inhibit light, electron donor, and electron access to the photoelectrode. The fabricated immunosensor exhibits a wide linear range from 1.0 × 10-3 - 1.0 × 102 ng mL-1 with the detection limit of 0.35 pg mL-1 (S/N = 3) for cytokeratin 19 fragment 21-1 detection. The study enhances sensitivity for PEC detection by utilizing the superior Z-scheme heterojunction photoelectrode, providing a valuable method that combines multiple signal pathways for a synergistic effect in bioanalysis.

Hydrogen-Bond-Induced Melem Assemblies to Resist Aggregation-Caused Quenching for Ultrasensitive ECL Detection of COVID-19 Antigen

Nowadays, aggregation-caused quenching (ACQ) of organic molecules in aqueous media seriously restricts their analytical and biomedical applications. In this work, hydrogen bond (H-bond) was utilized to resist the ACQ effect of 2,5,8-triamino-1,3,4,6,7,9,9b-heptaazaphenalene (Melem) as an advanced electrochemiluminescence (ECL) luminophore, whose ECL process was carefully studied in an aqueous K2S2O8 system coupled with electron paramagnetic resonance (EPR) measurements. Notably, the H-bond-induced Melem assemblies (Melem-H) showed 16.6-fold enhancement in the ECL signals as compared to the Melem aggregates (Melem-A), combined by elaborating the enhanced mechanism. On such basis, the effective ECL signal transduction was in situ achieved through the specific recognition of the double-stranded DNA embedded in Melem-H assemblies (Me-dsDNA) with spike protein (SP) of coronavirus disease 2019 (COVID-19). For that, such an ECL biosensor showed a wider linear range (1.0-125.0 pg mL-1) with a lower limit of detection (LOD) down to 0.45 pg mL-1, which also displayed acceptable results in analysis of human nasal swab samples. Therefore, the work provides a distinctive insight on addressing the ACQ effect and broadening the application scope of the organic emitter and offers a simple platform for biomedical detection.

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Automated ECL Aptasensing Platform from an Intrarticular Radical Annihilation Route for Distinguishing Glioma Stages

Nowadays, continuous efforts have been devoted to designing stable and high-efficiency electrochemiluminescence (ECL) emitters as alternatives for tris(2,2'-bipyridine)-ruthenium(II) (Ru(bpy)32+) in medical research. Herein, a novel ECL emitter was obtained by coordinating crystalline covalent triazinyl frameworks (cCTFs) with Ru2+ (termed Ru-cCTFs), which exhibited strong ECL emission by the ligand to metal charge transfer (LMCT) route. After its integration with 4-mercaptopyridine (SH-Py), the resultant SH-Py-Ru-cCTFs achieved 2.3-fold enhancement in the ECL efficiency by employing Ru(bpy)32+ as a standard, which involved a dynamic "intrarticular radical annihilation" ECL pathway. On such foundation, an automated ECL (A-ECL) aptasensor was constructed with an "on-off-on" model and magnetic separation upon linkage of the SH-Py-Ru-cCTFs with streptavidin (SA) magnetic beads (MBs). This automatic assay of miRNA-182 showed a wider linear range from 1.0 to 100.0 fM with a correlation coefficient (R2) of 0.994, a lower limit of detection (LOD) down to 0.28 fM, and faster operation within 41 min. Impressively, this bioassay facilely distinguished the stages of glioma disease from clinical blood samples with high accuracy. Hence, this research sheds light on how to develop advanced ECL luminophores and an automatic method, showing substantial insights into pathogenesis research of gliomas.

Recent Development of Implantable Chemical Sensors Utilizing Flexible and Biodegradable Materials for Biomedical Applications

Implantable chemical sensors built with flexible and biodegradable materials exhibit immense potential for seamless integration with biological systems by matching the mechanical properties of soft tissues and eliminating device retraction procedures. Compared with conventional hospital-based blood tests, implantable chemical sensors have the capability to achieve real-time monitoring with high accuracy of important biomarkers such as metabolites, neurotransmitters, and proteins, offering valuable insights for clinical applications. These innovative sensors could provide essential information for preventive diagnosis and effective intervention. To date, despite extensive research on flexible and bioresorbable materials for implantable electronics, the development of chemical sensors has faced several challenges related to materials and device design, resulting in only a limited number of successful accomplishments. This review highlights recent advancements in implantable chemical sensors based on flexible and biodegradable materials, encompassing their sensing strategies, materials strategies, and geometric configurations. The following discussions focus on demonstrated detection of various objects including ions, small molecules, and a few examples of macromolecules using flexible and/or bioresorbable implantable chemical sensors. Finally, we will present current challenges and explore potential future directions.

Self-enhanced Electrochemiluminescence Luminophore Based on Pd Nanocluster-Anchored Metal Organic Frameworks via Ion Annihilation for Sensitive Cell Assay of Human Lung Cancer

Electrochemiluminescence (ECL) has attracted significant interest in the analysis of cancer cells, where the ruthenium(II)-based emitter demonstrates urgency and feasibility to improve the ECL efficiency. In this work, the self-enhanced ECL luminophore was prepared by covalent anchoring of Pd nanoclusters on aminated metal organic frameworks (Pd NCs@MOFs), followed by linkage with bis(2,2'-bipyridine)-5-amino-1,10-phenanthroline ruthenium(II) (RuP). The resultant luminophore showed 214-fold self-magnification in the ECL efficiency over RuP alone, combined by promoting the interfacial photoelectron transfer. The enhanced mechanism through ion annihilation was critically proved by controlled experiments and density functional theory (DFT) calculations. Based on the above, a "signal off" ECL biosensor was built by assembly of tyrosine kinase 7 (PTK-7) aptamer (Apt) on the established sensing platform for analysis of human lung cancer cells (A549). The built sensor showed a lower detection limit of 8 cells mL-1, achieving the single-cell detection. This work reported a self-enhanced strategy for synthesis of advanced ECL emitters, combined by exploring the ECL biosensing devices in the single-cell analysis of cancers.

Photocurrent Polarity Switchable Sensing of Hyaluronidase Activity by Regulating Electrostatic Interactions between Two Semiconductors

Photocurrent polarity switchable photoelectrochemical (PEC) sensing has superior accuracy and anti-interference ability to conventional PEC sensing. The development of a novel strategy for photocurrent polarity switchable sensing is of great interest. Herein, a novel strategy for photocurrent polarity switchable sensing is reported by regulating electrostatic interactions between two semiconductor photoactive materials. Hyaluronic acid (HA)-modified CuO nanosheets show a negatively charged surface, which prevents the attachment of CuO nanosheets to negatively charged CdS nanodendrite-modified photoelectrodes because of the strong electrostatic repulsion. In the presence of hyaluronidase (HAase), the specific hydrolysis of HA on the surface of CuO by HAase can yield a positively charged surface, so CuO can be attached to a CdS-modified photoelectrode via electrostatic attraction, leading to photocurrent polarity switching. The photocurrent polarity switchable detection of HAase activity is achieved with an ultralow detection limit of 2 × 10-3 U mL-1 and a wide linear detection range between 0.01 and 100 U mL-1. This work provides a new and effective photocurrent polarity switching strategy for PEC sensing and a simple and efficient method for detecting HAase activity.

Ultrasensitive self-powered photoelectrochemical sensing for enrofloxacin detection by coupling piezoelectric effect with nonmetallic surface plasmon resonance based on ZnO nanorod arrays/WO3-x

Exploring efficient strategy for high-efficiency photoelectric conversion is quite important to design sensitive self-powered photoelectrochemical (PEC) sensing platform. This work designed a high performance self-powered PEC sensing platform by the integration of piezoelectric effect with localized surface plasmon resonance (LSPR) effect based on ZnO-WO_3-x heterostructures. Due to the fluid eddy induced piezoelectric effect by magnetic stirring, the piezoelectric semiconductor ZnO nanorod arrays (ZnO NRs) can facilitate the transfer of electrons and holes by generating piezoelectric potentials under external forces, thereby contributing to the performance of self-powered PEC platforms. Such working mechanism of the piezoelectric effect was studied by using the COMSOL software. Moreover, the introduction of defect engineered WO₃ (WO_3-x) can further broaden the light absorption and promote the charge transfer owing to the nonmetallic surface plasmon resonance effect. Remarkably, due to the synergizing piezoelectric and plasmonic effect, the photocurrent and maximum power output of ZnO-WO_3-x heterostructures were enhanced by 3.3-fold and 5.5-fold than that of bare ZnO, respectively. After the immobilization of the enrofloxacin (ENR) aptamer, the self-powered sensor demonstrated an excellent linearity (1 × 10^-14 M to 1 × 10^-9 M) with a low detection limit of 1.8 × 10^-15 M (S/N = 3). This work undoubtedly holds great promise to provide the innovative inspiration for the formation of high-performance self-powered sensing platform, which opens up a new horizon of potential in food safety and environmental monitoring.

In situ electrostatic assembly of porphyrin as enhanced PEC photosensitizer for bioassay of single HCT-116 cells via competitive reaction

Nowadays, synthesis of novel organic photosensitizer is imperative but challenging for photoelectrochemical (PEC) assay in analytical and biomedical fields. In this work, the PEC responses enhanced about 4.3 folds after in situ electrostatic assembly of 1-butyl-3-methylimidazole tetrafluoroborate ([BIm][BF₄]) on meso-tetra (4-carboxyphenyl) porphine (TP), which was first covalently linked with NH₂ modified indium tin oxide electrode ([BIm]⁺-^-TP-NH₂-ITO). Moreover, the [BIm]⁺-^-TP-NH₂-ITO showed a much larger photocurrent in a water/dimethyl sulfoxide (DMSO) binary solvent with a water fraction (f_w) of 90%, which displayed 6.7-fold increase over that in pure DMSO, coupled by discussing the PEC enhanced mechanism in detail. Then, the PEC signals were sharply quenched via a competitive reaction between magnetic bead linked dsDNA (i.e., initial hybridization of aptamer DNA with linking DNA) and HCT-116 cells (closely associated with CRC), where the liberated L-DNA stripped the [BIm]⁺ from [BIm]⁺-^-TP-NH₂-ITO. The PEC detection strategy exhibited a wider linear range (30 ∼ 3 × 10⁵ cells mL^-1) and a lower limit of detection (6 cells mL^-1), achieving single-cell bioanalysis even in diluted human serum sample. The in situ assembly strategy offers a valuable biosensing platform to amplify the PEC signals with advanced organic photosensitizer for early diagnosis of tumors.

Polyacrylic acid/polyethylene glycol hybrid antifouling interface for photoelectrochemical immunosensing of CYFRA 21-1 based on TiO2/PpIX/Ag@Cu2O composite

A photoelectrochemical (PEC) transducer based on composite TiO₂/PpIX/Ag@Cu₂O was prepared for the detection of CYFRA 21-1. TiO₂ nanomaterials were synthesized by hydrothermal method. TiO₂/PpIX/Ag@Cu₂O composites were obtained by combining protoporphyrin Ⅸ (PpIX) molecules and Ag@Cu₂O on TiO₂. This composite material has strong absorption in visible light region and excellent photoelectric chemical properties. Ascorbic acid (AA) is a good electron donor, which can remove photogenerated holes in liquid environment to inhibit the recombination of photogenerated electrons and hole pairs, thus enhancing the photocurrent and improving its stability. The results showed that the sensor can quantitatively test CYFRA 21-1 in the range of 0.1 pg/mL∼100 ng/mL. The photoelectric chemical sensor has the advantages of high sensitivity, low detection line limit and wide linear range.

Ultrasensitive PEC cytosensor for breast cancer cells detection and inhibitor screening based on plum-branched CdS/Bi2S3 heterostructures

Breast cancer is the most common malignant tumor in women, which seriously threatens the life and health of patients. Therefore, facile and sensitive detection of human breast cancer cells is crucial for cancer diagnosis. In this work, plum-branched CdS/Bi₂S₃ heterostructures (CdS/Bi₂S₃ HSs) were synthesized under hydrothermal condition, whose photoelectrochemical (PEC) property and biocompatibility were scrutinously investigated. In parallel, a signal amplification strategy was designed based on immune recognition between epidermal growth factor receptor (EGFR) overexpressed on membrane of breast cancer cells MDA-MB-231 and its aptamer. Integration of the above together, a highly sensitive PEC cytosensor was developed for analysis of target MDA-MB-231 cells, exhibiting a wider linear range of 1 × 10² ∼ 3 × 10⁵ cells mL^-1 with a limit of detection (LOD) down to 6 cells mL^-1 (S/N = 3). Further, the biosensor was explored for anticancer drug (e.g., dacomitinib) screening by monitoring the variations in the PEC signals of the expressed EGFR upon drug stimulation. The obtained CdS/Bi₂S₃ HSs are identified as promising and feasible photoactive material for determination of cancer cells and drug screening in clinic and related research.

Hydrogen Bond Organic Frameworks as Radical Reactors for Enhancement in ECL Efficiency and Their Ultrasensitive Biosensing

Nowadays, electrochemiluminescence (ECL) efficiency of an organic emitter is closely related with its potential applications in food safety and environmental monitoring fields. In this work, 2,4,6-tris(4-carboxyphenyl)-1,3,5-triazine (TATB) was self-assembled to form hydrogen bond organic frameworks (HOFs), which worked as ideal reactors to generate highly active oxygen-containing radicals, followed by linking with isoluminol (ILu) via amide bond (termed ILu-HOFs). After covalent assembly with aminated indium-tin oxide electrode (labeled NH₂-ITO), the ECL efficiency of the ILu-HOFs NH₂-ITO showed about a 23.4-time increase over that of ILu itself in the presence of H₂O₂. Meanwhile, the enhanced ECL mechanism was mainly studied by electron paramagnetic resonance, theoretical calculation, and electrochemistry. On the above foundation, an aptamer "sandwich" ECL biosensor was constructed for detecting isocarbophos (ICP) via in situ elimination of H₂O₂ with catalase-linked palladium nanocubes (CAT-Pd NCs). The as-built sensor showed a broad linear range (1 pM to 100 nM) and a low limit of detection (LOD) down to 0.4 pM, coupled with efficient assays of ICP in lake water and cucumber juice samples. This strategy provides an effective way for the synthesis of advanced ECL emitter, coupled by showing promising applications in environmental and food analysis.

Dual II-scheme nanosheet-like Bi2S3/Bi2O3/Ag2S heterostructures for ultrasensitive PEC aptasensing of aflatoxin B1 coupled with catalytic signal amplification by dendritic nanorod-like Au@Pd@Pt nanozyme

As one of the most toxic chemical substances, aflatoxin B1 (AFB1) has a strong carcinogenic effect even at a trace level in human and animal, which severely threatens human health and even causes cancers. Therefore, ultrasensitive detection of AFB1 is of significant importance. For such analysis, dual II-scheme sheet-like Bi₂S₃/Bi₂O₃/Ag₂S heterostructures were prepared by the in-situ growth method, which exhibited high separation efficiency for the electron-hole (e^--h⁺) pairs, prominent stability, and high photoactivity. Moreover, the dendritic nanorod-like Au@Pd@Pt (Au@Pd@Pt DNRs) nanozyme was homely synthesized, whose peroxidase-like activity was scrupulously investigated by catalytical oxidation of diaminobenzidine (DAB) in the presence of H₂O₂. Integration by the aptasensing strategy, a photoelectrochemical (PEC) "signal-on" aptasensor was prepared, which exhibited a broader linear range of 0.5 pg mL^-1-100 ng mL^-1 with a lower limit of detection (LOD = 0.09 pg mL^-1, S/N = 3). This work provides a feasible strategy to develop advanced PEC biosensors for actual analysis of environmental pollutants.

Nanotechnology-based diagnostics and therapeutics in acute lymphoblastic leukemia: a systematic review of preclinical studies

Background: Leukemia is a malignant disease that threatens human health and life. Nano-delivery systems improve drug solubility, bioavailability, and blood circulation time, and release drugs selectively at desired sites using targeting or sensing strategies. As drug carriers, they could improve therapeutic outcomes while reducing systemic toxicity. They have also shown promise in improving leukemia detection and diagnosis. The study aimed to assess the potential of nanotechnology-based diagnostics and therapeutics in preclinical human acute lymphoblastic leukemia (h-ALL). Methods: We performed a systematic search through April 2022. Articles written in English reporting the toxicity, efficacy, and safety of nanotechnology-based drugs (in the aspect of treatment) and specificity, limit of detection (LOD), or sensitivity (in the aspect of the detection field) in preclinical h-ALL were included. The study was performed according to PRISMA instructions. The methodological quality was assessed using the QualSyst tool. Results: A total of 63 original articles evaluating nanotechnology-based therapeutics and 35 original studies evaluating nanotechnology-based diagnostics were included in this review. As therapeutics in ALL, nanomaterials offer controlled release, targeting or sensing ligands, targeted gene therapy, photodynamic therapy and photothermic therapy, and reversal of multidrug-resistant ALL. A narrative synthesis of studies revealed that nanoparticles improve the ratio of efficacy to the toxicity of anti-leukemic drugs. They have also been developed as a vehicle for biomolecules (such as antibodies) that can help detect and monitor leukemic biomarkers. Therefore, nanomaterials can help with early diagnostics and personalized treatment of ALL. Conclusion: This review discussed nanotechnology-based preclinical strategies to achieve ALL diagnosis and therapy advancement. This involves modern drug delivery apparatuses and detection devices for prompt and targeted disease diagnostics. Nonetheless, we are yet in the experimental phase and investigational stage in the field of nanomedicine, with many features remained to be discovered as well as numerous problems to be solved.

The Research Advances of Aptamers in Hematologic Malignancies

Currently, research for hematological malignancies is very intensive, with many breakthroughs. Among them, aptamer-based targeted therapies could be counted. Aptamer is a targeting tool with many unique advantages (easy synthesis, low toxicity, easy modification, low immunogenicity, nano size, long stability, etc.), therefore many experts screened corresponding aptamers in various hematological malignancies for diagnosis and treatment. In this review, we try to summarize and provide the recent progress of aptamer research in the diagnosis and treatment of hematologic malignancies. Until now, 29 aptamer studies were reported in hematologic malignancies, of which 12 aptamers were tested in vivo and the remaining 17 aptamers were only tested in vitro. In this case, 11 aptamers were combined with chemotherapeutic drugs for the treatment of hematologic malignancies, 4 aptamers were used in combination with nanomaterials for the diagnosis and treatment of hematologic malignancies, and some studies used aptamers for the targeted transportation of siRNA and miRNA for targeted therapeutic effects. Their research provides multiple approaches to achieve more targeted goals. These findings show promising and encouraging future for both hematological malignancies basic and clinical trials research.

Covalent organic framework linked with amination luminol derivative as enhanced ECL luminophore for ultrasensitive analysis of cytochrome c

Cytochrome c (cyt c) plays a critical role in mitochondrial respiratory chain, whose absence is detrimental to electron transport and reduce adenosine triphosphate. For ultrasensitive detection of cyt c, sheet-like covalent organic frameworks (COFs) were prepared by orderly accumulation of 1,3,5-benzenetricarboxaldehyde (BTA) and p-phenylenediamine (PDA), and further grafted with N-(4-aminobutyl)-N-ethylisoluminol (ABEI) - an electrochemiluminescence (ECL) emitter. Specifically, the morphology and structure of the COFs-ABEI were mainly characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, and X-ray photoelectron spectroscopy (XPS). In parallel, the optical properties of the emitter were certified by UV-vis absorbance spectroscopy, Fourier infrared spectroscopy (FTIR), fluorescence (FL), and ECL measurements, showing 2.25-time enhanced ECL efficiency over pure ABEI, coupled by illustrating the interfacial electron transport mechanism. On the above foundation, a label-free "signal off" ECL biosensor was constructed by virtue of the specific immune recognition between the aptamer of the target cyt c with its capture DNA (cDNA) anchored on the biosensing platform, exhibiting a wider linear range of 1.00 fg mL^-1-0.10 ng mL^-1 (R² = 0.998) and a lower limit of detection (LOD) down to 0.73 fg mL^-1. This work offers some constructive guidelines for sensitive bioassays of disease-related biomarkers in the clinical field.

AuNPs/CdS QDs/CeO2 ternary nanocomposite coupled with scrollable three-dimensional DNA walker mediated cycling amplification for sensitive photoelectrochemical miRNA assay

Herein, a novel ternary nanocomposite (AuNPs/CdS QDs/CeO₂) with excellent photoelectrochemical (PEC) performance was synthesized as signal probe to construct a near-zero background biosensor for sensitive miRNA-182-5p detection, by integrating with a scrollable three-dimensional (3D) DNA walker mediated cleavage cycling amplification. Impressively, the formation and rolling of scrollable 3D DNA walker triggered by target could realize dynamic, rapid and specific digestion of hairpin DNA on electrode with the aid of Exonuclease III (Exo III), which thus exposed abundant binding sites for assembling stable DNA labeled AuNPs/CdS QDs/CeO₂ nanoprobes. Thanks to the formation of type-II heterojunction (between CeO₂ and CdS QDs) and Schottky junction (generated by CeO₂ and AuNPs), an ideal photoelectric conversion efficiency accompanied with stunningly improved photocurrent was thus acquired for significantly improving the detection sensitivity. It turned out that the detection limit (LOD) of biosensor was ultralow (31 aM). Significantly, the proposed PEC biosensor would exhibit great potential for the composite as a splendid indicator and provide an avenue for constructing the sensing platform with excellent sensitivity and ultralow background.

Photoelectrochemical biosensing platform based on in situ generated ultrathin covalent organic framework film and AgInS2 QDs for dual target detection of HIV and CEA

In this work, a new photoelectrochemical (PEC) biosensing platform based on an ordered two-dimensional (2D) ultrathin covalent organic framework (COF) film and AgInS₂ quantum dots (QDs) has been developed to enable dual-target detection of HIV and CEA. The porous COF film was firstly in situ generated on ITO, displaying super-stable and intense photocurrent with excellent repeatability. Moreover, an effective PEC quenching probe was specifically designed by loading large number of AgInS₂ QDs on Au nanoparticles (NPs). After target HIV-induced cyclic amplification process to generate abundant DNA S0, the Au NPs-AgInS₂ QDs probe was binded to the COF film through DNA hybridization, enabling PEC signal of the COF film to turn "off" for ultra-sensitive detection of HIV. Furthermore, when CEA as the second target specifically binded to its aptamer, the Au NPs-AgInS₂ QDs quenching probe was released, achieving PEC signal "on" of the T-DA COF film for ultra-sensitive detection of CEA. This work opened a unique 2-D COF film-based PEC biosensing platform with excellent signal for rapid detection of dual targets, which can effectively avoid false positives and negatives and shows promising application for early prevention and detection of cancer diseases.

Novel Ultrasensitive Photoelectrochemical Cytosensor Based on Hollow CdIn2S4/In2S3 Heterostructured Microspheres for HepG2 Cells Detection and Inhibitor Screening

Hepatocellular carcinoma is a life-threatening malignant tumor found around the world for its high morbidity and mortality. Therefore, it is of great importance for sensitive analysis of liver cancer cells (HepG2 cells) in clinical diagnosis and biomedical research. To fulfill this demand, hollow CdIn₂S₄/In₂S₃ heterostructured microspheres (termed CdIn₂S₄/In₂S₃ for clarity) were prepared by a two-step hydrothermal strategy and applied for building a novel photoelectrochemical (PEC) cytosensor for ultrasensitive and accurate detection of HepG2 cells through specific recognition of CD133 protein on the cell surface with the respective aptamer. The optical properties of CdIn₂S₄/In₂S₃ were investigated by UV-vis diffuse reflectance spectroscopy (DRS) and PEC technology. By virtue of their appealing PEC characteristics, the resultant PEC sensor exhibited a wider dynamic linear range from 1 × 10² to 2 × 10⁵ cells mL^-1 with a lower limit of detection (LOD, 23 cells mL^-1), combined by evaluating the expression level of CD133 protein stimulated by metformin as a benchmarked inhibitor. This work opens a valuable and feasible avenue for sensitive detection of diverse tumor cells, holding great potential in early clinical diagnosis and treatment coupled by screening inhibitors.