Iron Oxide with Different Crystal Phases (α- and γ-Fe2O3) in Electroanalysis and Ultrasensitive and Selective Detection of Lead(II): An Advancing Approach Using XPS and EXAFS

Modified Gold Screen-Printed Electrodes for the Determination of Heavy Metals

Screen-printed electrodes (SPEs) are reliable, portable, affordable, and versatile electrochemical platforms for the real-time analytical monitoring of emerging analytes in the environmental, clinical, and agricultural fields. The aim of this study was to evaluate the electrochemical behavior of gold screen-printed electrodes (SPGEs) modified with molecules containing amino (Tr-N) or α-aminophosphonate (Tr-P) groups for the selective and sensitive detection of the toxic metal ions Pb2+ and Hg2+ in aqueous samples. After optimizing the analytical parameters (conditioning potential and time, deposition potential and time, pH and concentration of the supporting electrolyte), anodic square wave stripping voltammetry (SWASV) was used to evaluate and compare the electrochemical performance of bare or modified electrodes for the detection of Hg2+ and Pb2+, either alone or in their mixtures in the concentration range between 1 nM and 10 nM. A significative improvement in the detection ability of Pb2+ ions was recorded for the amino-functionalized gold sensor SPGE-N, while the presence of a phosphonate moiety in SPGE-P led to greater sensitivity towards Hg2+ ions. The developed sensors allow the detection of Pb2+ and Hg2+ with a limit of detection (LOD) of 0.41 nM and 35 pM, respectively, below the legal limits for these heavy metal ions in drinking water or food, while the sensitivity was 5.84 µA nM-1cm-2 and 10 µA nM-1cm-2, respectively, for Pb2+ and Hg2+. The reported results are promising for the development of advanced devices for the in situ and cost-effective monitoring of heavy metals, even in trace amounts, in water resources.

Transforming crystal structures of cobalt molybdate to generate electron-rich sites for electrochemical detection of Pb(II)

BACKGROUND

Most of the investigations on distinct crystal structures of catalysts are individually focused on the difference of surface functional groups or adsorption properties, but rarely explore the changes of active sites to affect the electrocatalytic performance. Catalysts with diverse crystal structures had been applied to modified electrodes in different electrocatalytic reactions. However, there is currently a lack of an essential understanding for the role of real active sites in catalysts with crystalline structures in electroanalysis, which is crucial for designing highly sensitive sensing interfaces.

RESULTS

Herein, cobalt molybdate with divergent crystal structures (α-CoMoO4 and β-CoMoO4) were synthesized by adjusting the calcination temperature, indicating that α-CoMoO4 (800 °C) (60.00 μA μM-1) had the highest catalytic ability than β-CoMoO4 (700 °C) (38.68 μA μM-1) and α-CoMoO4 (900 °C) (29.55 μA μM-1) for the catalysis of Pb(II). It was proved that the proportion of Co(II) and Mo(IV) as electron-rich sites in α-CoMoO4 (800 °C) were higher than β-CoMoO4 (700 °C) and α-CoMoO4 (900 °C), possessing more electrons to participate in the valence cycles of Co(II)/Co(III) and Mo(IV)/Mo(VI) to boost the catalytic reduction of Pb(II). Specifically, Co(II) transferred a part of electrons to Mo(VI), promoting the formation of Mo(IV). Co(II) and Mo(IV), as the electron-rich sites, providing electrons to Pb(II), further accelerating the conversion of Pb(II) into Pb(0).

SIGNIFICANCE

In the process of detecting Pb(II), the CoMoO4 structures under different temperatures have distinct content of electron-rich sites Co(II) and Mo(IV). α-CoMoO4 (800 °C), with the highest content are benefited to detect Pb(II). This work is conducive to understanding the effect of the changes of active sites resulting from crystal transformation on the electrocatalytic performance, and provides a way to construct sensitive electrochemical interfaces of distinct active sites.

Voltammetric co-determination of lead and copper in gunshot residue based on iron oxide particle/spent coffee grounds-modified electrode

A novel electrochemical sensor was developed for the detection of lead (Pb) and copper (Cu) ions using spent coffee grounds decorated with iron oxide particles (FeO/SCG). The FeO-decorated SCG was used to modify a glassy carbon electrode (GCE). FeO, SCG, and FeO/SCG were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The electrochemical properties of the modified electrode were characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electrode modifications increased the active surface area and electron transfer and enhanced the accumulation of the target analyte. In the optimal condition, the developed sensor showed linear ranges of 1.0 µg L-1-0.05 mg L-1 and 0.05 mg L-1-0.8 mg L-1 for Pb2+ and 5.0 µg L-1-0.1 mg L-1 and 0.1 mg L-1-0.8 mg L-1 for Cu2+. The limit of detection (LOD) was 1.0 µg L-1 for Pb2+ and 2.4 µg L-1 for Cu2+. The developed sensor was successfully applied to determine Pb2+ and Cu2+ in bullet holes. The results were in good agreement with those obtained by inductively coupled plasma optical emission spectrometry (ICP/OES).

Electrochemical sensors modified with iron oxide nanoparticles/nanocomposites for voltammetric detection of Pb (II) in water: A review

Permissible limits of Pb2+ in drinking water are being reduced from 10 μgL-1 to 5 μgL-1, which calls for rapid, and highly reliable detection techniques. Electrochemical sensors have garnered attention in detection of heavy metal ions in environmental samples due to their ease of operation, low cost, and rapid detection responses. Selectivity, sensitivity and detection capabilities of these sensors, can be enhanced by modifying their working electrodes (WEs) with iron oxide nanoparticles (IONPs) and/or their composites. Therefore, this review is an in-depth analysis of the deployment of IONPs/nanocomposites in modification of electrochemical sensors for detection of Pb2+ in drinking water over the past decade. From the analyzed studies (n = 23), the optimal solution pH, deposition potential, and deposition time ranged between 3 and 5.6, -0.7 to -1.4 V vs Ag/AgCl, and 100-400 s, respectively. Majority of the studies employed square wave anodic stripping voltammetry (n = 16), in 0.1 M acetate buffer solution (n = 19) for detection of Pb2+. Limits of detection obtained (2.5 x 10-9 - 4.5 μg/L) were below the permissible levels which indicated good sensitivities of the modified electrodes. Despite the great performance of these modified electrodes, the primary source of IONPs has always been commercial iron-based salts in addition to the use of so many materials as modifying agents of these IONPs. This may limit reproducibility and sustainability of the WEs due to lengthy and costly preparation protocols. Steel and/or iron industrial wastes can be alternatively employed in generation of IONPs for modification of electrochemical sensors. Additionally, biomass-based activated carbons enriched with surface functional groups are also used in modification of bare IONPs, and subsequently bare electrodes. However, these two areas still need to be fully explored.

Predicting the binding configuration and release potential of heavy metals on iron (oxyhydr)oxides: A machine learning study on EXAFS

Heavy metals raise a global concern and can be easily retained by ubiquitous iron (oxyhydr)oxides in natural and engineered systems. The complex interaction between iron (oxyhydr)oxides and heavy metals results in various mineral-metal binding configurations, such as outer-sphere complexes and edge-sharing inner-sphere complexes, which determine the accumulation and release of heavy metals in the environment. However, traditional experimental approaches are time-consuming and inadequate to elucidate the complex binding relationships and configurations between iron (oxyhydr)oxides and heavy metals. Herein, a workflow that integrates the binding configuration data of 11 heavy metals on 7 iron (oxyhydr)oxides and then trains machine learning models to predict unknown binding configurations was proposed. The well-trained multi-grained cascade forest models exhibited high accuracy (> 90%) and predictive performance (R2 ∼ 0.75). The underlying effects of mineral properties, metal ion species, and environmental conditions on mineral-metal binding configurations were fully interpreted with data mining. Moreover, the metal release rate was further successfully predicted based on mineral-metal binding configurations. This work provides a method to accurately and quickly predict the binding configuration of heavy metals on iron (oxyhydr)oxides, which would provide guidance for estimating the potential release behavior of heavy metals and remediating heavy metal pollution in natural and engineered environments.

Highly Accurate Determination of the Total Amount of Pb2+ and Pb(OH)+ in a Natural Water Environment Revealed by Dynamic Simulation and DFT Calculation: Benefit from the Electron Inverse Effect of Pt Nanoclusters over Defective g-C3N4

Although utilizing nanomaterial-modified electrodes for lead ion detection has achieved great success, most of them are carried out under acidic conditions and ignore the variation of Pb(II) speciation at different pH conditions, leading to the potential inaccuracy of Pb(II) detection in a neutral natural water environment. Thus, designing a novel catalyst with high accuracy for the detection of various forms of the total amount of Pb(II) (Pb2+ and Pb(OH)+) in neutral waters is significant. Herein, Pt nanoclusters (Pt NCs) were elaborately constructed and stabilized on the Co single-atom-doped g-C3N4 with abundant N vacancies (Pt NCs/VN-C3N4), which achieved the ultrasensitive detection (102.16 μM μA-1) of Pb(II) in neutral conditions. The dynamic simulation and theoretical calculations reveal that the parallel deposition of Pb2+ and Pb(OH)+ occurs on the electrode surface modified by Pt NCs/VN-C3N4, and the current peaks of Pb(II) are cocontributed by Pb2+ and Pb(OH)+ species. An "electron inverse" phenomenon in Pt NCs/VN-C3N4 from the VN-C3N4 substrate to Pt NCs endows Pt NCs in an electron-rich state, serving as active centers to promote rapid and efficient reduction for both Pb2+ and Pb(OH)+, facilitating the accurate detection of the total amount of Pb(II) in all forms in the actual water environment.

Controlled Growth and Size-Dependent Magnetic Domain States of 2D γ-Fe2O3

Nonlayered two-dimensional (2D) magnets have attracted special attention, as many of them possess magnetic order above room temperature and enhanced chemical stability compared to most existing vdW magnets, which offers remarkable opportunities for developing compact spintronic devices. However, the growth of these materials is quite challenging due to the inherent three-dimensionally bonded nature, which hampers the study of their magnetism. Here, we demonstrate the controllable growth of air-stable pure γ-Fe2O3 nanoflakes by a confined-vdW epitaxial approach. The lateral size of the nanoflakes could be adjusted from hundreds of nanometers to tens of micrometers by precisely controlling the annealing time. Interestingly, a lateral-size-dependent magnetic domain configuration was observed. As the sizes continuously increase, the magnetic domain evolves from single domain to vortex and finally to multidomain. This work provides guidance for the controllable synthesis of 2D inverse spinel-type crystals and expands the range of magnetic vortex materials into magnetic semiconductors.

First Reusable Catalyst for the Reductive Coupling Reaction of Organohalides with Aldehydes

In this study, we simulate the reductive coupling (Barbier-Grignard-type) reaction of organohalides with aldehydes using a new reusable catalyst. In this regard, bimetallic alloys of NiCo encapsulated in melamine-based dendrimers (MBD) immobilized on magnetic nanoparticles symbolized as γ-Fe2O3-MBD/NiCo were designed and synthesized. The structure and properties of the catalyst were studied by a variety of techniques such as Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), energy-dispersive spectrometry (EDS) mapping, and inductively coupled plasma (ICP). The presence of NiCo nanoalloys was confirmed by XRD and XPS analysis, TEM images, and EDS mapping. Various secondary alcohols were produced in good to high yields by reductive coupling of different types of aldehydes and organohalides in the presence of HCO2K as a nonmetallic reducing agent in aqueous media catalyzed by γ-Fe2O3-MBD/NiCo. In these reactions, the high catalytic performance of γ-Fe2O3-MBD/NiCo was achieved in comparison to monometallic counterparts due to the synergistic cooperative effect of Co and Ni in the NiCo nanoalloys. Magnetic and hydrophilic properties of the catalyst facilitate the catalyst recyclability for seven runs. The reusability of γ-Fe2O3-MBD/NiCo, use of water as an environmentally friendly solvent, ease of processing, and absence of metal additives make this process an excellent choice for the reductive coupling reaction to produce secondary alcohols from aldehydes. This is the first report on these kinds of reactions using a reusable catalyst.

Bimodal interferences of Pb(II) induced by parallel deposition in Pb(II)-Cu(II) electrochemical detections: Voltammetric signals analysis combined with numerical simulations on transient interfacial phenomena

The perplexity of double peaks in Pb(II) detections has been a threat to the reliability of Pb(II) electroanalysis results for a long term. For the complexity of electrode interfaces, rare studies were taken on mechanisms of Pb(II) double peaks through interfacial kinetics. In this work, analyses on experimental signals and interfacial simulations were working together to reveal that the generation of Pb(II) double peaks in Pb(II)-Cu(II) systems is the deposition of Pb(II) on Cu deposits occurring in parallel. By applying anode stripping voltammetry and cyclic voltammetry, a parallel deposition reaction was found to influence the shape of Pb(II) peaks, and the existence of the second peak was controlled through the adjustment of experimental conditions. A kinetic model was built to reveal the interference of electroanalysis signals caused by a parallel deposition reaction and simulations based on the model were combined with experiments to illustrate that double peaks of Pb(II) were caused by the parallel deposition on Cu(II) deposits. This work proposes another insight of Pb(II) double peaks from macroscale kinetics and pays more attention on the dynamic procedure of electroanalysis interfaces, which makes the study on environmental electroanalysis interface phenomena more clear and is enlightening to develop efficient electrical methods for pollutant monitoring.

In-situ growth of porous rod-like tungsten oxide for electrochemical determination of cupric ion

Preconcentration can effectively enhance the detection performance of electrodes in the electrochemical detection of heavy metal ions, but it also presents challenges for real-time monitoring. Several attempts have been made to optimize preconcentration by improving the adsorption capacity or detection mechanism of the electrode. The valence transfer of tungsten oxide between W5+/W6+ can participate in the reduction between the electrode material and heavy metal ions, playing a role in preconcentration to some extent. Therefore, we developed a WO3/SSM electrochemical sensor for the detection of Cu(II) that utilizes the valence variation property of WO3. The crystallinity and microstructure of the WO3/SSM electrode can be regulated by controlling the deposition parameters, and we prepared three types of WO3/SSM with different morphologies to identify the influence of the electrochemical effective surface area. The proposed electrode shows high performance as a Cu(II) sensor under short preconcentration time (60 s), with an excellent sensitivity of 14.113 μA μM-1 cm-2 for 0.1-10.0 μM and 4.7356 μA μM-1 cm-2 for 10.0-20.0 μM. Overall, the combined effect of morphology and valence transfers shortens the preconcentration time and optimizes preconcentration while ensuring excellent electrode performance. This WO3/SSM electrode is expected to drive great advances in the application of tungsten oxide in the electrochemical detection of heavy metal ions.

Application of Co3O4 nanocrystal/rGO for simultaneous electrochemical detection of cadmium and lead in environmental waters

Sensing of cadmium (Cd) and lead (Pb) in environmental samples is crucial for identifying potential health risks associated with exposure to these heavy metals as well as understanding the extent of heavy metal contamination in different environments and its impact on the ecosystem. The present study elucidates the development of a novel electrochemical sensor that can detect Cd (II) and Pb (II) ions simultaneously. This sensor is fabricated using reduced graphene oxide (rGO) and cobalt oxide nanocrystals (Co₃O₄ nanocrystals/rGO). The characterization of Co₃O₄ nanocrystals/rGO was done by using various analytical techniques. The incorporation of cobalt oxide nanocrystals with intense absorption properties results in an amplification of the electrochemical current generated on the surface of the sensor by heavy metals. This, when coupled with the unique properties of the GO layer, enables the identification of trace levels of Cd (II) and Pb (II) in the surrounding environment. The electrochemical testing parameters were meticulously optimized to obtain high sensitivity and selectivity. The Co₃O₄ nanocrystals/rGO sensor exhibited exceptional performance in detecting Cd (II) and Pb (II) within a concentration range of 0.1-450 ppb. Notably, the limits of detection (LOD) for Pb (II) and Cd (II) were found to be highly impressive at 0.034 ppb and 0.062 ppb, respectively. The Co₃O₄ nanocrystals/rGO sensor integrated with the SWASV method displayed notable resistance to interference and exhibited consistent reproducibility and stability. Therefore, the suggested sensor has the potential to serve as a technique for detecting both ions in aqueous samples using SWASV analysis.

Fabrication of UV-Stable Perovskite Solar Cells with Compact Fe2O3 Electron Transport Layer by FeCl3 Solution and Fe3O4 Nanoparticles

Even though Fe₂O₃ is reported as the electron-transporting layer (ETL) in perovskite solar cells (PSCs), its fabrication and defects limit its performance. Herein, we report a Fe₂O₃ ETL prepared from FeCl₃ solution with a dopant Fe₃O₄ nanoparticle modification. It is found that the mixed solution can reduce the defects and enhance the performance of Fe₂O₃ ETL, contributing to improved electron transfer and suppressed charge recombination. Consequently, the best efficiency is improved by more than 118% for the optimized device. The stability efficiency of the Fe₂O₃-ETL-based device is nearly 200% higher than that of the TiO₂-ETL-based device after 7 days measurement under a 300 W Xe lamp. This work provides a facile method to fabricate environmentally friendly, high-quality Fe₂O₃ ETL for perovskite photovoltaic devices and provides a guide for defect passivation research.

General Strategies to Construct Highly Efficient Sensing Interfaces for Metal Ions Detection from the Perspective of Catalysis

Constructing high-effective electrode sensing interfaces has been considered an effective method for electrochemical detection toward heavy metal ions (HMIs). However, most research has been devoted to enhancing the stripping currents of HMIs by simply improving the adsorptive capacity and conductivity of the electrode modified materials, while lacking theoretical guidelines in fabricating catalytic sensing interfaces. Besides, the understanding of detection mechanisms is quite unscientific from the perspective of catalysis. This perspective summarizes five general strategies in designing highly efficient sensing interfaces in the recent five years, including modulating crystal phases, orientations and planes, defect engineering, ionic valence state cycle engineering, adsorption in situ catalysis strategy, and construction of atomic level catalytic active sites. What's more, the catalytic mechanisms for improving the signals of HMIs, such as boosting the electron transfer rates and conversion rates, lowering the energy barriers, etc., are introduced and emphasized. This study has a great significance in directionally controlling functionalized electrochemical sensors to achieve excellent sensitivity and selectivity in detecting environmental pollutants from the view of catalysis, and it also brings enlightenments and guidance to develop new electroanalytical methods.

Surface engineering of hematite nanorods photoanode towards optimized photoelectrochemical water splitting

Rapid charge recombination in hematite (Fe₂O₃) during photoelectrochemical water splitting is a major obstacle to achieving high-efficiency photoelectrodes. Surface defect engineering is considered as a viable strategy for enhancing photoelectrochemical activity of oxide photoanodes. Herein, a one-dimensional (1D) defective γ-Fe₂O₃ nanorods (DFNRs) photoanode is prepared using solvothermal and high-temperature hydrogenation strategies. The as-prepared DFNRs possess superior visible-light absorption capacity and exhibit excellent photoelectrochemical performance (0.98 mA cm^-2), with approximately three-fold higher photocurrent density than that of pristine Fe₂O₃ (FNRs, 0.32 mA cm^-2). The enhanced activity of the DFNRs results from the moderate formation of oxygen vacancy defects, which promotes spatial charge separation and transfer at the DFNRs/electrolyte interface, as well as the 1D nanorod structure, which favors rapid charge transfer. The surface of γ-Fe₂O₃ with hydroxyl (OH) groups provides sufficient surface-active sites. This result suggests that surface-oxygen deficiency of γ-Fe₂O₃ can not only expand the light absorption range but also facilitating photo-generated charge carriers separation. This surface engineering strategy provides an alternative method for preparing stable and highly active metal oxide photoanodes for photoelectrochemical water splitting.

Spin Selectivity of Chiral Mesostructured Iron Oxides with Different Magnetisms

Spin selectivity physically depends on either magnetic materials with strong internal magnetic fields or symmetry-breaking materials with large spin-orbit coupling (SOC). However, the spin selectivity of symmetry-breaking magnetic materials is not understood. Herein, the spin selectivity of iron oxides with different magnetisms arising from varying spin alignment is investigated. Chiral mesostructured films of Fe₃ O₄ (CMFFs), γ-Fe₂ O₃ (CMγFs), and α-Fe₂ O₃ (CMαFs), which share the same mesostructure, are prepared by a controllable calcination process of chiral mesostructured FeOOH films (CMOFs) grown on the substrate via an amino acid-induced hydrothermal route. CMFFs and CMγFs with ferrimagnetism exhibit magnetic field-dependent and simultaneously chirality-independent magnetic circular dichroism (MCD) signals, while CMαFs with antiferromagnetism exhibit chirality-dependent, magnetic field-independent MCD signals. It is speculated that the competitive effect between the spin alignment-induced and chirality-induced effective magnetic fields determines the energy splitting of opposite spins in the materials with different magnetisms.

da Trindade L, Oliveira RCD, D. Costa L, C. de Oliveira M, de Lazaro SR, Sambrano JR, Mendonça CR, de Boni L, L. Pontes FM, de Oliveira AJA, Leite ER, Longo E. Unconventional Disorder by Femtosecond Laser Irradiation in Fe2O3

This paper demonstrates that femtosecond laser-irradiated Fe₂O₃ materials containing a mixture of α-Fe₂O₃ and ε-Fe₂O₃ phases showed significant improvement in their photoelectrochemical performance and magnetic and optical properties. The absence of Raman-active vibrational modes in the irradiated samples and the changes in charge carrier emission observed in the photocurrent density results indicate an increase in the density of defects and distortions in the crystalline lattice when compared to the nonirradiated ones. The magnetization measurements at room temperature for the nonirradiated samples revealed a weak ferromagnetic behavior, whereas the irradiated samples exhibited a strong one. The optical properties showed a reduction in the band gap energy and a higher conductivity for the irradiated materials, causing a higher current density. Due to the high performance observed, it can be applied in dye-sensitized solar cells and water splitting processes. Quantum mechanical calculations based on density functional theory are in accordance with the experimental results, contributing to the elucidation of the changes caused by femtosecond laser irradiation at the molecular level, evaluating structural, energetic, and vibrational frequency parameters. The surface simulations enable the construction of a diagram that elucidates the changes in nanoparticle morphologies.

Au25 Nanoclusters Exhibit Superhigh Catalytic Activity in Electrochemical Detection of As(III)

An atomic-level Au nanocluster, as an excellent photocatalyst, is generally not considered as an efficient electrocatalyst due to its poor stability. Herein, a method is proposed to stabilize abundant Au₂₅ on Fe₂O₃ nanoplates (Au₂₅/OV-Fe₂O₃) successfully with oxygen vacancies (OV) created. Au₂₅/OV-Fe₂O₃ shows superhigh catalysis in the electrochemical reduction toward As(III). The record-breaking sensitivity (161.42 μA ppb^-1) is two orders of magnitude higher than currently reported, where an ultratrace limit of detection (9 ppt) is obtained, suggesting promising applications in the analysis of organic and bioactive substances. The stability of Au₂₅ is attributed to the Au-Fe bond formed after loading Au₂₅ nanoclusters on Fe₂O₃ nanoplates through "electron compensation" and bond length (Au-S) shortening. Moreover, the ligand S atoms in Au₂₅ nanoclusters significantly contribute to the reduction of As(III). The fantastic stability and superior catalytic ability of Au₂₅/OV-Fe₂O₃ provide guidelines to stabilize Au nanoclusters on metal oxides, indicating their potential electroanalytical applications.

Rapid Microwave-Assisted Synthesis of Fe3O4/SiO2/TiO2 Core-2-Layer-Shell Nanocomposite for Photocatalytic Degradation of Ciprofloxacin

In this work, magnetic nanoparticles based on magnetite were successfully prepared via rapid microwave-assisted synthesis. In order to obtain the ternary core–shell Fe3O4/SiO2/TiO2 nanocomposite, first magnetite (Fe3O4) nanoparticles were coated with a protective layer of silica (SiO2) and finally with titania (TiO2). The composite configuration comprising porous and photoactive shells should facilitate the removal of organic micropollutants (OMPs) from water. Furthermore, the magnetic core is critical for processing the management of the photocatalytic powder suspension. The magnetization of the prepared magnetic nanoparticles was confirmed by vibrating-sample magnetometry (VSM), while the structure and morphology of the core–shell nanocomposite were investigated by means of XRD, FTIR, and SEM. Adsorption and photocatalysis were evaluated by investigating the removal efficiency of ciprofloxacin (CIP) as a model OMP using the prepared magnetic core–shell nanocomposite under UV-A light irradiation. It was found that the Fe3O4/SiO2/TiO2 nanocomposite showed good synergistic adsorption and photocatalytic properties. The measurement of iron in eluate confirmed that no leaching occurred during the photocatalytic examination. The recovery of magnetic nanocomposite by an external magnetic field confirmed that the magnetically separated catalyst is highly suitable for recycling and reuse.

Boosting sensitive and selective detection toward Pb(II) via activation effect of Co and orbital coupling between Pb and O over Co@Co3O4 nanocatalyst

Fruitful achievements on electrochemical detection toward Pb(II) have been achieved, and their good performance is generally attributed to the adsorption property of nanomaterials. However, the design of sensing interfaces from the electronic structure and electron transfer process is limited. Here, Co@Co₃O₄ acquired an ultra-high detection sensitivity of 103.11 µA µM^-1 toward Pb(II), outperforming the results previously reported. The interfacial oxygen atoms build an electron bridge for Co activating Co₃O₄. Particularly, new energy levels of oxygen atoms were generated and matched with that of Pb(II). The strong orbital coupling effect between O and Pb makes the Co@Co₃O₄ sensitive and selective toward Pb(II). Compared with Co metal and Co₃O₄, Pb(II) got more electrons from Co@Co₃O₄, and longer Pb-O bonds were formed, allowing more Pb(II) to be catalyzed and reduced. Also, the superior stability and reproducibility of electrochemical detection make electrodes practicably. This work reveals that metals can stimulate intrinsically catalytic activity of their metal oxides, with the generation of orbit energy levels that match to a specific analyte. It provides a promising strategy for constructing sensitive and selective sensing interfaces toward ultra-low concentration analyte in body fluid and other complex samples.

Nanoremediation technologies for sustainable remediation of contaminated environments: Recent advances and challenges

A major and growing concern within society is the lack of innovative and effective solutions to mitigate the challenge of environmental pollution. Uncontrolled release of pollutants into the environment as a result of urbanisation and industrialisation is a staggering problem of global concern. Although, the eco-toxicity of nanotechnology is still an issue of debate, however, nanoremediation is a promising emerging technology to tackle environmental contamination, especially dealing with recalcitrant contaminants. Nanoremediation represents an innovative approach for safe and sustainable remediation of persistent organic compounds such as pesticides, chlorinated solvents, brominated or halogenated chemicals, perfluoroalkyl and polyfluoroalkyl substances (PFAS), and heavy metals. This comprehensive review article provides a critical outlook on the recent advances and future perspectives of nanoremediation technologies such as photocatalysis, nano-sensing etc., applied for environmental decontamination. Moreover, sustainability assessment of nanoremediation technologies was taken into consideration for tackling legacy contamination with special focus on health and environmental impacts. The review further outlines the ecological implications of nanotechnology and provides consensus recommendations on the use of nanotechnology for a better present and sustainable future.

Gas sensing materials roadmap

Gas sensor technology is widely utilized in various areas ranging from home security, environment and air pollution, to industrial production. It also hold great promise in non-invasive exhaled breath detection and an essential device in future internet of things. The past decade has witnessed giant advance in both fundamental research and industrial development of gas sensors, yet current efforts are being explored to achieve better selectivity, higher sensitivity and lower power consumption. The sensing layer in gas sensors have attracted dominant attention in the past research. In addition to the conventional metal oxide semiconductors, emerging nanocomposites and graphene-like two-dimensional materials also have drawn considerable research interest. This inspires us to organize this comprehensive 2020 gas sensing materials roadmap to discuss the current status, state-of-the-art progress, and present and future challenges in various materials that is potentially useful for gas sensors.

Synthesis of a stable iron(iii)–organic framework for a visible light induced simultaneous photocatalytic reduction of Cr(vi) and the degradation of organic dyes in water

A stable microporous Fe-MOF was synthesized as single-crystals and was applied as a bifunctional catalyst for the photocatalytic Cr(vi) reduction and organic dyes degradation.

Electrons in Oxygen Vacancies and Oxygen Atoms Activated by Ce3+/Ce4+ Promote High-Sensitive Electrochemical Detection of Pb(II) over Ce-Doped α-MoO3 Catalysts

Modulating the active sites of oxygen vacancies (OVs) to enhance the catalytic properties of nanomaterials has attracted much research interest in various fields, but its intrinsic catalytic mechanism is always neglected. Herein, we establish an efficient strategy to promote the electrochemical detection of Pb(II) by regulating the concentration of OVs in α-MoO₃ nanorods via doping Ce³⁺/Ce⁴⁺ ions. α-MoO₃ with the Ce-doped content of 9% (C9M) exhibited the highest detection sensitivity of 106.64 μM μA^-1 for Pb(II), which is higher than that achieved by other metal oxides and most precious metal nanomaterials. It is found that C9M possessed the highest concentration of OVs, which trapped some electrons for strong affinity interaction with Pb(II) and provided numerous atomic level interfaces of high surface free energy for catalysis reactions. X-ray absorption fine structure spectra and density functional theory calculation indicate that Pb(II) was bonded with the surface-activated oxygen atoms (Os) around Ce ions and obtained some electrons from Os. Besides, the longer Pb-O bonds on C9M were easier to break, causing a low desorption energy barrier to effectively accelerate Pb(II) desorbing to the electrode surface. This study helps to understand the changes in electronic structure and catalytic performance with heteroatom doping and OVs in chemically inert oxides and provide a reference for designing high-active electrocatalytic interfaces to realize ultrasensitive analysis of environmental contaminants.

Nanometal Oxides with Special Surface Physicochemical Properties to Promote Electrochemical Detection of Heavy Metal Ions

Heavy metal ions (HMIs) are one of the major environmental pollution problems currently faced. To monitor and control HMIs, rapid and reliable detection is required. Electrochemical analysis is one of the promising methods for on-site detection and monitoring due to high sensitivity, short response time, etc. Recently, nanometal oxides with special surface physicochemical properties have been widely used as electrode modifiers to enhance sensitivity and selectivity for HMIs detection. In this work, recent advances in the electrochemical detection of HMIs using nanometal oxides, which are attributed to specific crystal facets and phases, surficial defects and vacancies, and oxidation state cycle, are comprehensively summarized and discussed in aspects of synthesis, characterization, electroanalysis application, and mechanism. Moreover, the challenges and opportunities for the development and application of nanometal oxides with functional surface physicochemical properties in electrochemical determination of HMIs are presented.

Efficient degradation of indole by microbial fuel cell based Fe2O3-polyaniline-dopamine hybrid composite modified carbon felt anode

Indole is a high-toxic refractory nitrogen-containing compound that could cause serious harm to the human and ecosystem. It has been a challenge to develop economical and efficient technology for degrading indole. Microbial fuel cell (MFC) has great potential in the removal of organic pollutants utilizing microorganisms as catalysts to degrade organic matter into the nutrients. Herein, a novel anode of Fe₂O₃-polyaniline-dopamine hybrid composite modified carbon felt (Fe₂O₃-PDHC/CF) was prepared by electrochemical deposition. The degradation efficiency of indole by the MFC loading Fe₂O₃-PDHC/CF anode was up to 90.3 % in 120 h operation, while that of the MFC loading CF anode was only 44.0 %. The maximum power density of the MFC loading Fe₂O₃-PDHC/CF anode was 3184.4 mW·m^-2, increasing 113 % compared to the MFC loading CF anode. The superior performances of the MFC with Fe₂O₃-PDHC surface-modified anode owned to the synergistic effect of high conductive Fe₂O₃ and admirably biocompatible polyaniline-dopamine. MFC with the Fe₂O₃-PDHC/CF anode could produce considerable electricity and effectively degrade indole in water, which demonstrated a practical approach for the efficient degradation of refractory organic compounds in wastewater.

Lead and cadmium adsorption by electrospun PVA/PAA nanofibers: Batch, spectroscopic, and modeling study

Water-stable PVA/PAA nanofibers were fabricated through electrospinning and evaluated for their performance in lead (Pb(II)) and cadmium (Cd(II)) removal from water in a batch experiment. The adsorption mechanism of Pb(II) was explored using the extended X-ray absorption fine structure (EXAFS) spectroscopic analysis. The PVA/PAA nanofibers showed a pH-dependent behavior for heavy metal removal, and its adsorption capacities for Pb(II) and Cd(II) could reach as high as 159 and 102 mg/g, respectively. The calcium ion (Ca(II)) had no effect on Pb(II) removal at pH 5.0 whereas it significantly reduced Cd(II) removal at pH 7.0. The adsorption of Pb(II) and Cd(II) was spontaneous and exothermic in nature with a decrease in randomness. The saturated PVA/PAA nanofibers could be regenerated using acidic solutions for reuse. The Fourier-transform infrared (FTIR) spectroscopic analysis indicated the formation of surface complexes between adsorbed Pb(II) and Cd(II) and carboxyl groups on PVA/PAA nanofibers. Moreover, EXAFS analysis suggested that a Pb(II) cation was chelated with three carboxyl groups on the nanofibers. This molecular-level adsorption structure was successfully implemented into a surface complexation model for the prediction of the macroscopic Pb(II) and Cd(II) adsorption behaviors. The results gained from this study provided complementary information on heavy metal removal by a new generation of adsorbents and improved the fundamental understanding for the removal process.

Probing the multi-step crystallization dynamics of micelle templated nanoparticles: structural evolution of single crystalline γ-Fe2O3

Iron oxide nanoparticles synthesized with narrow size distribution were characterized using Raman spectroscopy, transmission electron microscopy and a superconducting quantum interference device magnetometer to investigate their composition, crystal structure and magnetic properties. Raman allowed us to explore the polymorphous transition of the iron oxide from the beginning of the synthesis process, as Raman can be used to monitor the precursors, the diblock-copolymer micelles and the resultant particles simultaneously under various processing steps. As different polymorphs possess distinct Raman active phonon modes, it also allows the identification of the exact phases of the resultant nanoparticles. Consequently, we show that the reverse micelle process results in pure phase nanoparticles only under certain conditions. Using insights obtained from examining the entire synthesis process, we can adjust the structure of small nanoparticles (∼6 nm) to achieve coercivity and saturation magnetization values that are usually only obtainable from larger particles (25 nm or larger). In this way, we show a route to tunable magnetic response based on the purity of the crystal phase rather than the particle size. By understanding the evolution of the entire synthesis process, it is possible to adjust the processing conditions to yield monodisperse single crystal phase nanoparticles for widespread use in a variety of applications.

Simple-Structured Micromotors Based on Inherent Asymmetry in Crystalline Phases: Design, Large-Scale Preparation, and Environmental Application

The key principle of designing a micro/nanomotor is to introduce asymmetry to a micro/nanoparticle. However, micro/nanomotors designed based on external asymmetry and inherent chemical and geometrical asymmetry usually suffer from tedious small-scale preparation, high cost, and/or complexity of external power and control devices, making them face insurmountable hurdles in practical applications. Herein, considering the possible distinct properties of different polymorphs, we propose a novel design strategy of simple-structured micromotors by introducing inherent asymmetry in crystalline phases. The inherent phase asymmetry can be easily introduced in spherical TiO₂ particles by adjusting the calcination temperature to control the phase transition and growth of primary grains. The as-designed anatase/rutile TiO₂ micromotors not only show efficient autonomous motions controlled by light in liquid media stemming from the asymmetric surface photocatalytic redox reactions but also have a promising application in environmental remediation due to their high photocatalytic activity in "on-the-fly" degradation of organic pollutants, facile large-scale fabrication, and low cost. The proposed design strategy may pave the way for the large-scale productions and applications of micro/nanomotors.

Nanoarchitectured peroxidase-mimetic nanozymes: mesoporous nanocrystalline α- or γ-iron oxide?

Next-generation nanozyme based biosensing: mesoporous nanocrystalline α- or γ-iron oxide?

Iron oxides with a reverse spinel structure: impact of active sites on molecule adsorption

Fe₃O₄ and γ-Fe₂O₃ with the same crystal structure reflect different catalytically active sites leading to different catalyst properties.

Cation Segregation of A-Site Deficiency Perovskite La0.85FeO3-δ Nanoparticles toward High-Performance Cathode Catalysts for Rechargeable Li-O2 Battery

Cation segregation of perovskite oxide is crucial to develop high-performance catalysts. Herein, we achieved the exsolution of α-Fe₂O₃ from parent La_0.85FeO_3-δ by a simple heat treatment. Compared to α-Fe₂O₃ and La_0.85FeO_3-δ, α-Fe₂O₃-LaFeO_{3- x} achieved a significant improvement of lithium-oxygen battery performance in terms of discharge specific capacity and cycling stability. The promotion can be attributed to the interaction between α-Fe₂O₃ and LaFeO_{3- x}. During the cycling test, α-Fe₂O₃-LaFeO_{3- x} can be stably cycled for 108 cycles at a limited discharge capacity of 500 mAh g^-1 at a current density of 100 mA g^-1, which is remarkably longer than those of La_0.85FeO_3-δ (51 cycles), α-Fe₂O₃ (21 cycles), and mechanical mixing of LaFeO₃ and α-Fe₂O₃ (26 cycles). In general, these results suggest a promising method to develop efficient lithium-oxygen battery catalysts via segregation.

Structural Incorporation of Manganese into Goethite and Its Enhancement of Pb(II) Adsorption

Natural goethite (α-FeOOH) commonly accommodates various metal elements by substituting for Fe, which greatly alters the surface reactivity of goethite. This study discloses the enhancement of Mn-substitution for the Pb²⁺adsorption capacity of goethite. The incorporated Mn in the synthesized goethite presents as Mn(III) and causes a slight decrease in the a and c of the unit cell parameters and an observable increase in the b direction due to the Jahn-Teller effect of the Mn(III)O₆ octahedra. With the Mn content increasing, the particle size decreases gradually, and the surface clearly becomes roughened. The Pb²⁺ adsorption capacity of goethite is observably enhanced by Mn substitution due to the modified surface complexes. And the increased surface-area-normalized adsorption capacity for Mn-substituted goethite indicated that the enhancement of Pb adsorption is not only attributed to the increase of surface area but also to the change of binding complexes. Extended X-ray absorption fine structure (EXAFS) analysis indicates that the binding structures of Pb²⁺ on goethite presents as edge-sharing complexes with a regular R_Pb-Fe = 3.31 Å. In the case of Mn-goethite, Pb²⁺ is also bound with the Mn surface site on the edge-sharing complex with a larger R_Pb-Mn = 3.47 Å. The mechanism for enhancing Pb²⁺ adsorption on Mn-goethite can be interpreted as the preferred Pb²⁺ binding on the Mn site of Mn-goethite surface. In a summary, the Mn-goethite has great potential for material development in environmental remediation.

High Electrochemical Sensitivity of TiO2- x Nanosheets and an Electron-Induced Mutual Interference Effect toward Heavy Metal Ions Demonstrated Using X-ray Absorption Fine Structure Spectra

Mutual interference is a severe issue that occurs during the electrochemical detection of heavy metal ions. This limitation presents a notable drawback for its high sensitivity to specific targets. Here, we present a high electrochemical sensitivity of ∼237.1 μA cm^-2 μM^-1 toward copper(II) [Cu(II)] based on oxygen-deficient titanium dioxide (TiO_{2- x}) nanosheets. We fully demonstrated an atomic-level relationship between electrochemical behaviors and the key factors, including the high-energy (001) facet percentage, oxygen vacancy concentration, surface -OH content, and charge carrier density, is fully demonstrated. These four factors were quantified using Raman, electron spin resonance, X-ray photoelectron spectroscopy spectra, and Mott-Schottky plots. In the mutual interference investigation, we selected cadmium(II) [Cd(II)] as the target ion because of the significant difference in its stripping potential (∼700 mV). The results show that the Cd(II) can enhance the sensitivity of TiO_{2- x} nanosheets toward Cu(II), exhibiting an electron-induced mutual interference effect, as demonstrated by X-ray absorption fine structure spectra.