Self-Enhanced Ultrasensitive Photoelectrochemical Biosensor Based on Nanocapsule Packaging Both Donor-Acceptor-Type Photoactive Material and Its Sensitizer

Red and near-infrared light-activated photoelectrochemical nanobiosensors for biomedical target detection

Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.

Further Improvement Based on Traditional Nanocapsule Preparation Methods: A Review

Nanocapsule preparation technology, as an emerging technology with great development prospects, has uniqueness and superiority in various industries. In this paper, the preparation technology of nanocapsules was systematically divided into three categories: physical methods, chemical methods, and physicochemical methods. The technological innovation of different methods in recent years was reviewed, and the mechanisms of nanocapsules prepared via emulsion polymerization, interface polymerization, layer-by-layer self-assembly technology, nanoprecipitation, supercritical fluid, and nano spray drying was summarized in detail. Different from previous reviews, the renewal iteration of core-shell structural materials was highlighted, and relevant illustrations of their representative and latest research results were reviewed. With the continuous progress of nanocapsule technology, especially the continuous development of new wall materials and catalysts, new preparation technology, and new production equipment, nanocapsule technology will be used more widely in medicine, food, cosmetics, pesticides, petroleum products, and many other fields.

Ultrasensitive MicroRNA Photoelectric Assay Based on a Mimosa-like CdS-NiS/Au Schottky Junction

Seeking and constructing superior photoactive materials have the potential to improve the performance of photoelectrochemical (PEC) biosensors. In this work, we proposed a novel mimosa-like ternary inorganic composite with a significantly enhanced light-harvesting ability and photogenerated carrier separation rate. This ternary photoactive material was obtained via electrodeposition of gold nanoparticles (Au) on the surface of transition metal sulfide composite of CdS and NiS (CdS-NiS/Au). The experimental results showed that the high initial photocurrent was acquired on CdS-NiS/Au (68-fold higher than that of individual CdS) with the synergistic effect of p-n heterojunction, Schottky junction, and the eminent optical properties of gold nanoparticles. Meanwhile, using silver nanoclusters prepared by link DNA protection as an effective quencher, integrating the duplex-specific nuclease-assisted rolling circle amplification strategy, a "Signal ON" PEC biosensor was fabricated for the detection of microRNA 21 (miRNA 21). With the release of the quencher, the recovered photocurrent is able to achieve determination of miRNA 21 within the range from 10 aM to 1 pM with a detection limit down to 4.6 aM (3σ). Importantly, this work not only provides a superb idea for designing ternary inorganic heteromaterials with exceptional photoactive ability but also allows the detection of other biomarkers by selecting appropriate recognition units.

Probing the electronic structure and photophysics of thiophene-diketopyrrolopyrrole derivatives in solution

Diketopyrrolopyrroles are a popular class of electron-withdrawing unit in optoelectronic materials. When combined with electron donating side-chain functional groups such as thiophenes, they form a very broad class of donor-acceptor molecules: thiophene-diketopyrrolopyrroles (TDPPs). Despite their widescale use in biosensors and photovoltaic materials, studies have yet to establish the important link between the electronic structure of the specific TDPP and the critical optical properties. To bridge this gap, ultrafast transient absorption with 22 fs time resolution has been used to explore the photophysics of three prototypical TDPP molecules: a monomer, dimer and polymer in solution. Interpretation of experimental data was assisted by a recent high-level theoretical study, and additional density functional theory calculations. These studies show that the photophysics of these molecular prototypes under visible photoexcitation are determined by just two excited electronic states, having very different electronic characters (one is optically bright, the other dark), their relative energetic ordering and the timescales for internal conversion from one to the other and/or to the ground state. The underlying difference in electronic structure alters the branching between these excited states and their associated dynamics. In turn, these factors dictate the fluorescence quantum yields, which are shown to vary by ∼1-2 orders of magnitude across the TDPP prototypes investigated here. The fast non-radiative transfer of molecules from the bright to dark states is mediated by conical intersections. Remarkably, wavepacket signals in the measured transient absorption data carry signatures of the nuclear motions that enable mixing of the electronic-nuclear wavefunction and facilitate non-adiabatic coupling between the bright and dark states.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Photoelectrochemical monitoring of miRNA based on Au NPs@g-C3N4 coupled with exonuclease-involved target cycle amplification

Herein, a sensitive photoelectrochemical (PEC) biosensing platform was designed for quantitative monitoring of microRNA-141 (miRNA-141) based on Au nanoparticles@graphitic-like carbon nitride (Au NPs@g-C₃N₄) as the signal generator accompanying with T7 exonuclease (T7 Exo)-involved target cycle amplification process. Initially, the prepared Au NPs@g-C₃N₄ as the signal generator was coated on the electrode surface, which could produce a strong PEC signal due to the unique optical and electronic properties of g-C₃N₄ and the surface plasmonic resonance (SPR) enhanced effect of Au NPs. Meanwhile, the modified Au NPs@g-C₃N₄ was also considered as the fixed platform for immobilization of S1-S2 through Au-N bond. Thereafter, the T7 Exo-involved target cycle amplification process would be initiated in existence of miRNA-141 and T7 Exo, leading to abundant single chain S1 exposed on electrode surface. Ultimately, the S3-SiO₂ composite was introduced through DNA hybridization, thereby producing high steric hindrance to block external electrons supply and light harvesting, which would further cause a significantly quenched PEC signal. Experimental results revealed that the PEC signal was gradually inhibited with the raising miRNA-141 concentration in the range from 1 fM to 1 nM with a detection limit of 0.3 fM. The PEC biosensor we proposed here provides a valuable scheme in miRNA assay for early disease diagnosis and biological research.

Nanotechnology in emerging liquid biopsy applications

Liquid biopsy is considered as the most attractive alternative to traditional tissue biopsies. The major advantages of this approach lie in the non-invasive procedure, the rapidness of sample collection and the potential for early cancer diagnosis and real-time monitoring of the disease and the treatment response. Nanotechnology has dynamically emerged in a wide range of applications in the field of liquid biopsy. The benefits of using nanomaterials for biosensing include high sensitivity and detectability, simplicity in many cases, rapid analysis, the low cost of the analysis and the potential for portability and personalized medicine. The present paper reports on the nanomaterial-based methods and biosensors that have been developed for liquid biopsy applications. Most of the nanomaterials used exhibit great analytical performance; moreover, extremely low limits of detection have been achieved for all studied targets. This review will provide scientists with a comprehensive overview of all the nanomaterials and techniques that have been developed for liquid biopsy applications. A comparison of the developed methods in terms of detectability, dynamic range, time-length of the analysis and multiplicity, is also provided.

Nanostructure-based photoelectrochemical sensing platforms for biomedical applications

As a newly developed and powerful analytical method, the use of photoelectrochemical (PEC) biosensors opens up new opportunities to provide wide applications in the early diagnosis of diseases, environmental monitoring and food safety detection. The properties of diverse photoactive materials are one of the essential factors, which can greatly impact the PEC performance. The continuous development of nanotechnology has injected new vitality into the field of PEC biosensors. In many studies, much effort on PEC sensing with semiconductor materials is highlighted. Thus, we propose a systematic introduction to the recent progress in nanostructure-based PEC biosensors to exploit more promising materials and advanced PEC technologies. This review briefly evaluates the several advanced photoactive nanomaterials in the PEC field with an emphasis on the charge separation and transfer mechanism over the past few years. In addition, we introduce the application and research progress of PEC sensors from the perspective of basic principles, and give a brief overview of the main advances in the versatile sensing pattern of nanostructure-based PEC platforms. This last section covers the aspects of future prospects and challenges in the nanostructure-based PEC analysis field.

Highly Sensitive Photoelectrochemical Biosensor Based on Quantum Dots Sensitizing Bi2Te3 Nanosheets and DNA-Amplifying Strategies

In this work, Bi₂Te₃ nanosheets treated with N-vinyl-pyrrolidinone showed highly sufficient and stable photocurrent for being used as a novel photoactive material. Accordingly, with CdTe quantum dots (QDs) sensitizing Bi₂Te₃ nanosheets, photoelectrochemical (PEC) biosensor coupling of DNA-amplifying strategies was constructed for sensitive miRNA-21 detection. Initially, the Bi₂Te₃ nanosheets on the electrode have conductive surface states with dissipationless electronic property, thus providing a highly stable photocurrent and a large surface-to-volume ratio. Then, with the participation of target miRNA-21 and auxiliary DNA, strand displacement amplification took place, thereby opening substantial DNA hairpins for triggering the next hybridization chain reaction (HCR). Through the HCR, long DNA tails decorated with CdTe QDs could thus be assembled on the electrode for enhancing the photocurrent of Bi₂Te₃ nanosheets. As a result, the proposed PEC biosensor showed a wide detection range from 10 fM to 100 pM with a detection limit of 3.3 fM, displaying a promising avenue to construct simple, ultrasensitive, and stable analytical techniques and tremendous potential in bioanalysis and early clinical diagnosis.

One DNA circle capture probe with multiple target recognition domains for simultaneous electrochemical detection of miRNA-21 and miRNA-155

In this work, a novel DNA circle capture probe with multiple target recognition domains was designed to develop an electrochemical biosensor for ultrasensitive detection of microRNA-21 (miRNA-21) and miRNA-155 simultaneously. The DNA circle capture probe was anchored at the top of the tetrahedron DNA nanostructure (TDN) to simultaneously recognize miRNA-21 and miRNA-155 through multiple target recognition domains under the assistance of Helper strands, which could trigger mimetic proximity ligation assay (mPLA) for capturing the beacons ferrocene (Fc)-A1 and methylene blue (MB)-A2 to achieve multiple miRNAs detection. In this way, the local reaction concentration could be enhanced and avoid the interference of various capture probes compared with the traditional multiplexed electrochemical biosensor with the use of different capture probes, resulting in the significantly improvement of detection sensitivity. As a result, this proposed biosensor showed wide linearity ranging from 0.1 fM to 10 nM with detection limits of miRNA-21 and miRNA-155 as 18.9 aM and 39.6 aM respectively, which also could be applied in the simultaneously detection of miRNA-21 and miRNA-155 from cancer cell lysates. The present strategy paved a new path in the design of capture probes for achieving more efficient and sensitive multiple biomarkers detections and possessed the potential applications in clinical diagnostic of diseases.

An CuInS2 photocathode for the sensitive photoelectrochemical determination of microRNA-21 based on DNA-protein interaction and exonuclease III assisted target recycling amplification

A photocathode is described for the determination of microRNA-21 by using CuInS₂ as an active photocathode material. Exonuclease III assisted target recycling amplification was employed to enhance the detection sensitivity. The TATA-binding protein (TBP) was applied to enhance steric hindrance which decreases the photoelectrochemical intensity. This strategy is designed by combining the anti-interference photocathode material, enzyme assisted target recycling amplification and TBP induced signal off, showing remarkable amplification efficiency. Under the optimized conditions, the detection limit for microRNA-21 is as low as 0.47 fM, and a linear range was got from 1.0 × 10^-15 M to 1.0 × 10^-6 M. Graphical abstract Schematic representation of sensitive photoelectrochemical detection of microRNA-21.CuInS₂ is used as an active photocathode material. Combined Exonuclease III assisted target recycling amplification and TATA-binding protein decreased of photoelectrochemical intensity, the detection limit was 0.47 fM with good selectivity. (miR-21: microRNA-21; CS: chitosan).

A novel "signal on" photoelectrochemical strategy based on dual functional hemin for microRNA assay

In this work, a novel "signal on" photoelectrochemistry (PEC) biosensor was constructed with dual-functional hemin as a signal quencher and electronic mediator for ultrasensitive target microRNA-141 assay with the assistance of T7 exonuclease (Exo)-initiated target amplification technology.

In situ chemical redox and functionalization of graphene oxide: toward new cathodic photoelectrochemical bioanalysis

This report outlines the first exploration of graphene oxide (GO) itself as a light harvesting material with an innovative in situ chemical redox and functionalization (CRF) strategy for versatile and high-throughput cathodic photoelectrochemical (PEC) bioanalysis.

Gold Nanoparticle-Induced Photocurrent Quenching and Recovery of Polymer Dots: Toward Signal-On Energy-Transfer-Based Photocathodic Bioanalysis of Telomerase Activity in Cell Extracts

Energy transfer (ET) in photoelectrochemical (PEC) bioanalysis is usually generated between noble metal nanoparticles (NPs) and traditional inorganic quantum dots (QDs). Using the innovative polymer dot (Pdot)-involved ET, this work reports the first signal-on and cathodic PEC bioanalysis toward telomerase (TE) activity in cell extracts. Specifically, the sequential binding of capture DNA (cDNA), telomerase primer sequence (TS), and Au NP-labeled probe DNA (Au NP-pDNA) on the electrode would place the Au NPs in close proximity of the Pdots, leading to obvious quenching of the cathodic photocurrent. The subsequent extension of the TS by TE in the presence of deoxyribonucleoside triphosphates (dNTPs) would then release the Ag NP-pDNA from the electrode, leading to the recovery of the photocurrent. On the basis of the Au NP-induced photocurrent quenching and the recovery of Pdots, a sensitive biosensor could thus be developed by tracking the photocurrents to probe the TE activity. This strategy allows for signal-on and cathodic PEC bioanalysis of TE, which can be easily extended for numerous other targets of interest. We believe this work could offer a new perspective for the rational implementation of Pdot-involved ET for advanced PEC bioanalysis.

Photoelectrochemical aptamer-based sensing of the vascular endothelial growth factor by adjusting the light harvesting efficiency of g-C3N4 via porous carbon spheres

A "signal-off" sensor is described for sensitive photoelectrochemical (PEC) determination of the vascular endothelial growth factor (VEGF₁₆₅). Graphitic carbon nitride (g-C₃N₄) is used as the signalling material, and porous carbon spheres as efficient quenchers of the photocurrent. The quenching efficiency of carbon spheres is the result of two effects, viz. (a) the competitive light absorption and (b) competitive electron donor activity which decreases the number of light-generated electrons and holes and also reduces the charge separation efficiency. This new mechanism differs from the previous quenching mechanisms which usually are based on the suppression of electron transport or steric hindrance. A glassy carbon electrode was modified with an aptamer against VEGF₁₆₅. On binding of analyte (VEGF₁₆₅), the reduction of current is measured (at a typical potential of 0 V) using H₂O₂ as the electrochemical probe. The sensor has a linear response in the 10^-5 nM to 10² nM VEGF₁₆₅ concentration range, and the detection limit is 3 fM. Graphical abstract Schematic presentation of the quenching mechanism of carbon spheres: the competitive light absorption and competitive electron donor reduce the number of light-generated electrons in the conduction band (CB) and holes in the valence band (VB) and also reduce the charge separation efficiency.

Mimic peroxidase-transfer enhancement of photoelectrochemical aptasensing via CuO nanoflowers functionalized lab-on-paper device with a controllable fluid separator

Inspired by the design of folding greeting cards and tissue drawing covers, a photoelectrochemical (PEC) lab-on-paper device with a controllable fluid separator, producing both reaction zone and detection zone, was explored for ultrasensitive detection of adenosine 5'-triphosphate (ATP) via mimic peroxidase-transfer enhancement of photocurrent response. To realize it, the DNA1, aptamer, and DNA2 as well as the mimic peroxidase of G-quadruplex/hemin modified Au nanocubes were linked on the graphene oxide-functionalized reaction zone via the DNA hybridization. Meanwhile, three-dimensional CuO nanoflowers (CuO NFs) as a photoactive material with outstanding electron transfer ability and absorption of light were grown in situ on the detection zone, providing a PEC active interface. Besides, an innovative fluid separator was elaborately designed by assembling a strip of paper with a hydrophilic channel, providing an effective way to bridge the gap between the two zones with a controllable drawing way, which could successfully avoid the signal interference caused by modifying biomolecules layer by layer on photosensitive materials. In the presence of ATP, the G-quadruplex/hemin modified in the reaction zone was dissociated due to the specific recognition of ATP with aptamer and released into the detection zone with the assistance of controllable fluid separator. The free G-quadruplex/hemin could catalyze hydrogen peroxide to generate oxygen for the consumption of photo-induced electrons from CuO NFs, which could further promote the electron-hole carriers separation efficiency, and eventually resulting in the enhancement of PEC signal. The proposed PEC lab-on-paper device could be employed for specific detection of ATP in the range from 5.0 to 3.0 × 10³ nM with a detection limit of 2.1 nM.

Ultrasensitive Photoelectrochemical Assay with PTB7-Th/CdTe Quantum Dots Sensitized Structure as Signal Tag and Benzo-4-chlorohexadienone Precipitate as Efficient Quencher

Herein, an ultrasensitive photoelectrochemical (PEC) assay was developed for the monitoring of microRNA-141 (miRNA-141) based on poly{4,8-bis[5-(2-ethylhexyl)thiophen-2-yl]benzo[1,2- b:4,5- b']dithiophene-2,6-diyl- alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4- b]thiophene-4,6-diyl}/CdTe quantum dots ( PTB7-Th/CdTe QDs) sensitized structure as signal tag and the benzo-4-chlorohexadienone (4-CD) precipitate as efficient quencher. PTB7-Th and CdTe QDs were successively modified on the electrode surface to form a novel sensitized structure with eminent photovoltaic performances and surpassing film-forming ability. The PTB7-Th/CdTe QDs sensitized structure served as signal tag for achieving a strong initial PEC signal. Besides, a tiny amount of target (miRNA-141) could be transformed into numerous DNA products via enzyme-assisted target cycling procedure, which further triggered the formation of a DNA supersandwich structure on the electrode surface for loading abundant manganese porphyrin (MnPP). Thereafter, MnPP as mimetic enzyme could catalyze 4-chloro-1-naphthol (4-CN) to generate 4-CD precipitate on the sensing interface in the presence of H₂O₂, which could efficiently block electron transfer, leading to a significantly quenched PEC signal for determination of miRNA-141. The designed PEC biosensor performed a wide detection range from 0.1 fM to 1 nM with a low detection limit of 33 aM for miRNA-141, which paved a new avenue for highly accurate and ultrasensitive monitoring of multifarious analytes in bioanalysis and clinical diagnosis.

Green light excited ultrasensitive photoelectrochemical biosensing for microRNA at a low applied potential based on the dual role of Au NPs in TiO2 nanorods/Au NPs composites

An ultrasensitive photoelectrochemical biosensing strategy for microRNA at a low applied potential was designed based on the robust photocurrent generated by TiO2 nanorods/Au nanoparticles (Au NPs) composites under green light excitation. The dual role of Au NPs dramatically improved the photocurrent, which guaranteed enough sensitivity, leading to the excellent performance in microRNA detection.

Oligonucleotide-modulated photocurrent enhancement of a tetracationic porphyrin for label-free homogeneous photoelectrochemical biosensing

This work reports the first demonstration of an oligonucleotide-modulated label-free homogeneous photoelectrochemical (PEC) biosensing platform based on the adsorption of tetracationic porphyrin (denoted as TMPyP here) onto 1-naphthalenesulfonate anion (NS^-)-grafted indium tin oxide electrode (denoted as TMPyP-NS^--ITO), which generates a stable and rapid photocurrent response. We found that when NS^--ITO electrode was subjected to single-stranded oligonucleotide (ssON) before TMPyP adsorption, a remarkable enhancement of photocurrent intensity was observed from the resulted TMPyP-ssON-NS^--ITO electrode with high specificity towards oligonucleotide. A series of investigations were carried out to understand the mechanism of this oligonucleotide-modulated photocurrent enhancement phenomenon. Moreover, the studies of this robust photocurrent enhancement mechanism was successfully extended to develop a signal-on homogeneous PEC biosensing platform for, as a proof-of-concept, label-free M.SssI methyltransferase activity analysis through a judiciously and compatibly engineered signal transduction strategy consisted of hairpin-shaped oligonucleotide probe, restriction endonuclease HpaII, and Exonuclease I. The rationally designed homogeneous PEC biosensor exhibit sensitive PEC response toward M.SssI methyltransferase with a low detection limit of 3.5 mU/mL and a wide linear range from 0.01 to 120 U/mL. Additionally, we show that our homogeneous PEC biosensing platform can be also utilized to screen methyltransferase inhibitors. Therefore, this work will provide a distinctive paradigm for versatile homogeneous PEC biosensing platform that can be used as potential powerful tool toward innovative label-free bioanalytical purposes.

Formation of Homogeneous Epinephrine-Melanin Solutions to Fabricate Electrodes for Enhanced Photoelectrochemical Biosensing

The development of a simple but effective surface modification method is very important for the construction of biosensing interfaces. In this work, a postsynthetic water-soluble epinephrine-melanin (EPM) prepared from the self-polymerization of epinephrine has been demonstrated as an alternative of the widely used in situ formed polydopamine (PDA) for the surface coating of TiO₂ nanoparticles and the construction of a photoelectrochemical (PEC) biosensing interface. In contrast to the formation of insoluble aggregates in solution for dopamine, a homogeneous solution was obtained for epinephrine after the self-polymerization. The use of EPM as a postsynthetic material enables the surface coating of TiO₂ with the simple drop-casting method. Compared with the widely used dip-coating method for in situ PDA modification, the developed drop-casting method based on the use of water-soluble postsynthetic EPM saves more time, avoids the waste of bulk solution, and undoubtedly decreases the batch-to-batch inconsistencies. The simple coating of commercially available TiO₂ nanoparticles with EPM greatly enhances the PEC performance due to the charge transfer property of EPM. The application of EPM in the construction of the PEC biosensing interface was demonstrated by the immobilization of a model biorecognition element (prostate specific antigen (PSA) antibody) onto EPM modified indium tin oxide (ITO) photoanode. Sensitive detection of PSA with high selectivity and stability was obtained on the basis of the biological recognition ability of PSA antibody. This work may renew the use of postsynthetic melanin-like biopolymers in other fields.

Stackable Lab-on-Paper Device with All-in-One Au Electrode for High-Efficiency Photoelectrochemical Cyto-Sensing

Highly conductive, robust, and multifunctional integrated paper-supported electrodes are requisite to fulfill the promise of paper-based analytical application. Herein, an all-in-one Au electrode comprising of detection zone, waterproof electronic bridge, and signal output contactor was engineered via combining the double-sided growth method with the secondary wax-printing. Benefiting from the strongly omnidirectional conductivity and desirably mechanical robustness of the as-prepared electrode, a stackable lab-on-paper cyto-device integrated with high-efficiency photoelectrochemical strategy was developed for the MCF-7 cells assay. Specifically, the detection zone of the electrode, serving as the signal generator, was functionalized with a low-toxic cosensitized structure composed of corn-like ZnO nanorods, graphene quantum dots (GQDs), and Ag₂Se QDs. With the proximity control of DNA hairpin-based aptamer probe (DHAP), a strong photocurrent could be promoted by the activated cosensitization effect and collected on the signal output contactor via the electron transport of waterproof electronic bridge. Upon the MCF-7 cells recognition, the DHAP switched from closed to open state with the formation of DNA-cell bioconjugates and the spatial separation of Ag₂Se QDs linked on the terminal of DHAP from the electrode surface. The photocurrent was noticeably decreased due to the double inhibition of steric hindrance effect and vanished cosensitization effect. Based on the target-triggered photocurrent attenuation, the sensitive detection of target cells was achieved. This work not only provided a unique method for paper-based electrode preparation but also offered a powerful platform for the highly sensitive photoelectrochemical bioanalysis.

Bismuth Oxyiodide Couples with Glucose Oxidase: A Special Synergized Dual-Catalysis Mechanism for Photoelectrochemical Enzymatic Bioanalysis

On the basis of a special synergized dual-catalysis mechanism, this work reports the preparation of a BiOI-based heterojunction and its use for cathodic photoelectrochemical (PEC) oxidase biosensing, which, unexpectedly, revealed that hydrogen peroxide (H₂O₂) had a greater impact than dioxygen (O₂). Specifically, the BiOI layer was in situ formed on the substrate through an impregnating hydroxylation method for the following coupling with the model enzyme of glucose oxidases (GOx). The constructed cathodic PEC enzyme sensor exhibited a good analytical performance of rapid response, high stability, and good selectivity. Especially, glucose-induced H₂O₂-controlled enhancement of the photocurrent was recorded rather than the commonly observed O₂-dependent suppression of the signal. This interesting phenomenon was attributed to a special synergized dual-catalysis mechanism. Briefly, this study is expected to provide a new BiOI-based photocathode for general PEC bioanalysis development and to inspire more interest in the design and construction of a novel heterojunction for advanced photocathodic bioanalysis. More importantly, the mechanism revealed here would offer a totally different perspective for the use of a biomimetic catalyst in the design of future PEC enzymatic sensing and the understanding of relevant signaling routes as well as the implementation of innovative PEC devices.

Visible-light driven Photoelectrochemical Immunosensor Based on SnS2@mpg-C3N4 for Detection of Prostate Specific Antigen

Herein, a novel label-free photoelectrochemical (PEC) immunosensor based on SnS2@mpg-C3N4 nanocomposite is fabricated for the detection of prostate specific antigen (PSA) in human serum. Firstly, mesoporous graphite-like carbon nitride (mpg-C3N4) with carboxyl groups is synthesized successfully which possesses high specific surface area and large pore volume. Then, SnS2 as a typical n-type semiconductor with weak photoelectric conversion capability is successfully loaded on carboxylated mpg-C3N4 to form a well-matched overlapping band-structure. The as-synthesized SnS2@mpg-C3N4 nanocomposite performs outstanding photocurrent response under visible-light irradiation due to low recombination rate of photoexcited electron-hole pairs, which is transcend than pure SnS2 or pure mpg-C3N4. It is worth noting that SnS2@mpg-C3N4 nanocomposite is firstly employed as the photoactive material in PEC immunosensor area. The concentration of PSA can be analyzed by the decrease in photocurrent resulted from increased steric hindrance of the immunocomplex. Under the optimal conditions, the developed PEC immunosensor displays a liner photocurrent response in the range of 50 fg·mL-1 ~ 10 ng·mL-1 with a low detection limit of 21 fg·mL-1. Furthermore, the fabricated immunosensor with satisfactory stability, reproducibility and selectivity provides a novel method for PSA determination in real sample analysis.