A Potentiometric Addressable Photoelectrochemical Biosensor for Sensitive Detection of Two Biomarkers

Photoelectrochemical sensing of isoniazid and streptomycin based on metal Bi-doped BiOI microspheres grown on book-shape layers of Ti3C2 heterostructures

Isoniazid and streptomycin are vital drugs for treating tuberculosis, which are utilized as efficient anti-tuberculosis agents. This paper presents a novel visible-light-driven composite photocatalyst Ti3C2/Bi/BiOI, which was built from Ti3C2 nanosheets and Bi/BiOI microspheres. Photoelectrochemical (PEC) sensors based on Ti3C2/Bi/BiOI were synthesized for isoniazid identification, which showed a linear concentration range of 0.1-125 μM with a detection limit of 0.05 μM (S/N = 3). Moreover, we designed a PEC aptasensors based on aptamer/Ti3C2/Bi/BiOI to detect streptomycin in 0.1 M PBS covering the electron donor isoniazid, because the isoniazid consumes photogenerated holes thus increasing the photocurrent effectively and preventing photogenerated electron-hole pairs from being recombined. Furthermore, PEC aptasensors based on aptamer/Ti3C2/Bi/BiOI were synthesized for streptomycin identification, which exhibited a linear concentration range of 0.01-1000 nM with a detection limit of 2.3 × 10-3 nM (S/N = 3), and are well stable in streptomycin sensing.

In Situ Growth Reaction on Photoelectrodes of Single-Atom Fe Incorporated Bi4O5I2: A General Photoelectrochemical Immunoassay Toward Sensitive Protein Analysis

As one of the interesting signaling mechanisms, the in situ growth reaction on a photoelectrode has proven its powerful potential in photoelectrochemical (PEC) bioanalysis. However, the specific interaction between the signaling species with the photoactive materials limits the general application of the signal mechanism. Herein, on the basis of an in situ growth reaction on a photoelectrode of single-atom-based photoactive material, a general PEC immunoassay was developed in a split-type mode consisting of the immunoreaction and PEC detection procedure. Specifically, a single-atom photoactive material that incorporates Fe atoms into layered Bi4O5I2 (Bi4O5I2-Fe SAs) was used as a photoelectrode for PEC detection. The sandwich immunoreaction was performed in a well of a 96-well plate using Ag nanoparticles (Ag NPs) as signal tracers. In the PEC detection procedure, the Ag+ converted from Ag NPs were transferred onto the surface of the Bi4O5I2-Fe SAs photoelectrode and thereafter AgI was generated on the Bi4O5I2-Fe SAs in situ to form a heterojunction through the reaction of Ag+ with Bi4O5I2-Fe SAs. The formation of heterojunction greatly promoted the electro-hole separation, boosting the photocurrent response. Exemplified by myoglobin (Myo) as the analyte, the immunosensor achieved a wide linear range from 1.0 × 10-11 to 5.0 × 10-8 g mL-1 with a detection limit of 3.5 × 10-12 g mL-1. This strategy provides a general PEC immunoassay for disease-related proteins, as well as extends the application scope of in situ growth reaction in PEC analysis.

COVID-19 cooling: Nanostrategies targeting cytokine storm for controlling severe and critical symptoms

As severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants continue to wreak havoc worldwide, the "Cytokine Storm" (CS, also known as the inflammatory storm) or Cytokine Release Syndrome has reemerged in the public consciousness. CS is a significant contributor to the deterioration of infected individuals. Therefore, CS control is of great significance for the treatment of critically ill patients and the reduction of mortality rates. With the occurrence of variants, concerns regarding the efficacy of vaccines and antiviral drugs with a broad spectrum have grown. We should make an effort to modernize treatment strategies to address the challenges posed by mutations. Thus, in addition to the requirement for additional clinical data to monitor the long-term effects of vaccines and broad-spectrum antiviral drugs, we can use CS as an entry point and therapeutic target to alleviate the severity of the disease in patients. To effectively combat the mutation, new technologies for neutralizing or controlling CS must be developed. In recent years, nanotechnology has been widely applied in the biomedical field, opening up a plethora of opportunities for CS. Here, we put forward the view of cytokine storm as a therapeutic target can be used to treat critically ill patients by expounding the relationship between coronavirus disease 2019 (COVID-19) and CS and the mechanisms associated with CS. We pay special attention to the representative strategies of nanomaterials in current neutral and CS research, as well as their potential chemical design and principles. We hope that the nanostrategies described in this review provide attractive treatment options for severe and critical COVID-19 caused by CS.

Distance-Regulated Photoelectrochemical Sensor "Signal-On" and "Signal-Off" Transitions for the Multiplexed Detection of Viruses Exposed in the Aquatic Environment

Photochemical (PEC) sensors were severely limited for multiplex detection applications due to the cross interference between multiplex signals at the single recognition interface. In this work, a distance-regulated PEC sensor was developed for multiplex detection by using an i-Motif sequence with conformational transformation activity as the signal transduction unit. Through dynamic regulation of the spatial distance between the end site of the functional sequence and the electrode material, the photogenerated electrons on the surface of the sensor were directionally transferred. Thus, a PEC sensor with "signal-on" and "signal-off" dual signal output modes was developed for simultaneous detection of multitarget molecules. Combining isothermal nucleic acid amplification, the PEC sensor constructed in this work was successfully applied to the detection of two virus (Norovirus and Rotavirus) nucleic acid sequences. Under the optimal condition, this bioassay protocol exhibits a linear range of 0.01-100 nM for both viruses with detection limits of 0.72 and 0.53 pM, respectively. In this study, a stimulus-mediated distance regulation strategy successfully addressed the transduction of multiplex detection signals at the single recognition interface of the PEC sensor. It is expected that the technical barriers to multiplex detection of PEC sensors will be overcome and the application of PEC sensing technology will be expanded in the field of environmental analysis.

Self-Cleaning Recyclable Multiplexed Photoelectrochemical Sensing Strategy Based on Exonuclease III-Assisted Signal Discrimination

For discriminating the signals of multi-targets, multiplexed photoelectrochemical (PEC) detection is generally accomplished by modulating the light source or voltage, which prospect is usually limited by expensive instrumentation, tedious operational steps, and time-consuming material screening. To realize multiplexed determination on single photoelectric interface using the routine technique, a non-instrument-assisted strategy for signal discrimination needs to be explored. Herein, we propose an exonuclease III-mediated multiple PEC signals resolution strategy and construct a self-cleaning recyclable multiplexed PEC sensor using a porphyrin-bipyridine-based covalent organic framework (Por-Bpy COF) photocathode. Specifically, following the dual-target recognition event, exonuclease III cleaves the DNA strand attached to the magnetic bead so that the two signal labels can be separated. Once the signal label binds to the DNA on the electrode surface (E-DNA), exonuclease III turns to excise the DNA strand of the signal label and consequently the E-DNA can repeatedly bind different signal labels. As a result, distinguishable photocurrent signals of different targets can be generated on a single photoelectric interface. The feasibility of this multiplexed sensor is verified by detecting two coexisting mycotoxins aflatoxin B1 and zearalenone. On account of eliminating the instrumentation constraints and simplifying the experimental procedures, the proposed sensing strategy may provide a brand-new idea for the exploration of portable multiplexed PEC sensing devices.

Photoelectrochemical immunosensor for HER2 detection based on BiVO4-Bi2S3 heterojunction as photoactive material and CdS as signal probe

A sandwiched photoelectrochemical (PEC) sensor was developed for sensitive detection of human epidermal growth factor receptor 2 (HER2) based on BiVO₄-Bi₂S₃ heterojunction as the photoelectric material accompanied with magnetic nanoparticles for enrichment of HER2 and CdS for signal amplification. The in situ generation of Bi₂S₃ on the surface of BiVO₄ forming a BiVO₄-Bi₂S₃ heterojunction is more conducive to the transit of electron-hole pairs. Antibody-modified MNs are utilized to capture and separate HER2 from samples. After forming a sandwich immune structure, under illumination, the photocurrent shows an increasing trend with the increment of HER2 concentration. The PEC immunosensor displays a good linear concentration range between 1.00 and 1.00 × 10³ pg·mL^-1 and a low limit of detection down to 0.680 pg·mL^-1 (S/N = 3) for HER2 under a bias voltage of 0.1 V (vs. Ag/AgCl electrode). Furthermore, the sensor was successfully applied to detect HER2 in serum samples with recoveries that ranged between 96.1 and 114% with RSDs between 1.3 and 5.9%.

2D carbon materials based photoelectrochemical biosensors for detection of cancer antigens

Cancer is a leading cause of death globally and early diagnosis is of paramount importance for identifying appropriate treatment pathways to improve cancer patient survival. However, conventional methods for cancer detection such as biopsy, CT scan, magnetic resonance imaging, endoscopy, X-ray and ultrasound are limited and not efficient for early cancer detection. Advancements in molecular technology have enabled the identification of various cancer biomarkers for diagnosis and prognosis of the deadly disease. The detection of these biomarkers can be done by biosensors. Biosensors are less time consuming compared to conventional methods and has the potential to detect cancer at an earlier stage. Compared to conventional biosensors, photoelectrochemical (PEC) biosensors have improved selectivity and sensitivity and is a suitable tool for detecting cancer agents. Recently, 2D carbon materials have gained interest as a PEC sensing platform due to their high surface area and ease of surface modifications for improved electrical transfer and attachment of biorecognition elements. This review will focus on the development of 2D carbon nanomaterials as electrode platform in PEC biosensors for the detection of cancer biomarkers. The working principles, biorecognition strategies and key parameters that influence the performance of the biosensors will be critically discussed. In addition, the potential application of PEC biosensor in clinical settings will also be explored, providing insights into the future perspective and challenges of exploiting PEC biosensors for cancer diagnosis.

Temperature-Responsive Nanocarrier-Regulated Alternative Release of "Cargos" for a Multiplex Photoelectrochemical Bioassay of Antibiotic-Resistant Genes

A smart temperature stimuli-driven multiplex photoelectrochemical (PEC) assay was constructed for antibiotic resistance genes (ARGs) detection, where the stimuli-responsive gatekeeping by regulating the alternative release of "cargo" allowed for the simultaneous detection of multiple tetracycline resistance gene, using tetA (T_DNA1) and tetC (T_DNA2) as the model. Dual temperature-responsive nanoassemblies were embedded in the PEC bioassay as signal DNA tages: one thermoresponsive polymer (poly(N-isopropylacrylamide), PNIPAM)-capped mesoporous silica nanoparticles (MSN) with loading the "cargo" of HgO nanoparticles as signal DNA1 tags (S_DNA1-PNIPAM@MSN@HgONPs) and the other antimony tartrate (SbT)-anchored silica nanospheres as signal DNA2 tags (S_DNA2-SbT@SiO₂NSs). At 20 °C, below the lower critical solution temperature (LCST) of PNIPAM, the "gatekeeper" PNIPAM in S_DNA1-PNIPAM@MSN@HgONPs was in an ON state, igniting Hg²⁺ release through the pore of SiO₂. While at above LCST (40 °C), it was in an OFF state. Likewise, the thermo-dependent dissociation of SbT endowed the grafted S_DNA2 tags switching from the OFF (at 20 °C) to ON state (at 40 °C), igniting SbO⁺ release. The released Hg²⁺ and SbO⁺ triggered the amplified photocurrents due to the structure evolution of the photoactive layer into HgS/ZnS or Sb₂S₃/ZnS heterostructure, thus achieving sensitive detection of multiple ARGs: tetA, tetC, tetG, tetM, tetO, tetZ, tetX, and tetW. Combined with heat map analysis, rapid screening of the ARGs profiles in 12 samples could be realized. This bioassay is simple and accessible for multiple genes analysis with the detection limit down to 0.50 nM. And it was successfully applied for measuring tetracycline ARGs in real sludge samples.

Light-Addressable Electrochemical Sensors toward Spatially Resolved Biosensing and Imaging Applications

The light-addressable electrochemical sensor (LAES) is a recently emerged bioanalysis technique combining electrochemistry with the photoelectric effect in a semiconductor. In an LAES, a semiconductor substrate is illuminated locally to generate charge carriers in a well-defined area, thereby confining the electrochemical process to a target site. Benefiting from the unique light addressability, an LAES can not only detect multiple analytes in parallel within a single sensor plate but also act as a bio(chemical) imaging sensor to visualize the two-dimensional distribution of specific analytes. An LAES usually has three working modes: a potentiometric mode using light-addressable potentiometric sensors (LAPS) and an impedance mode using scanning photoinduced impedance microscopy (SPIM), while an amperometric mode refers to light-addressable electrochemistry (LAE) and photoelectrochemical (PEC) sensing. In this review, we describe the detection principles of each mode of LAESs and the concept of light addressability. In addition, we highlight the recent progress and advance of LAESs in spatial resolution, sensor system design, multiplexed detection, and bio(chemical) imaging applications. An outlook on current research challenges and future prospects is also presented.

Photoelectrochemical immunoassay of interleukin-6 based on covalent reaction-triggered photocurrent polarity switching of ZnO@fullerenol

We report here a novel photocurrent polarity switching strategy for a photoelectrochemical immunoassay driven by the covalent reaction between fullerenol (COH) and chloranilic acid (CA). The sensitive detection of interleukin-6 is achieved by using CA-encapsulated liposome as the label and COH-coated ZnO as the photoactive material, with a detection limit of 1.0 fg mL^-1.

A cathode photoelectrochemical assay of terminal deoxynucleotidyl transferase activity based on Ag-AgI-CNTs composite and surface multisite strand displacement amplification

Photocathode-based assay is anti-interference for real sample detection. Photocathode produces low photocurrent signal and gives rise to poor sensitivity. Herein, a novel cathode photoelectrochemical (CPEC) sensing platform based on Ag-AgI-CNTs as photocathode material and K₃[Fe(CN)₆] as photoelectron acceptor was established. Since [Fe(CN)₆]^3- effectively accepted photoelectrons from Ag-AgI-CNTs, it greatly enhanced the CPEC response. Combining a surface multisite strand displacement amplification (SMSDA) strategy, the CPEC platform was applied for the activity assay of terminal deoxynucleotidyl transferase (TdT). In this proposal, oligo dT primer tethered on CPEC platform was in-situ extended to generate a polyA tail. Then the polyA tail formed a stable multi-point hybrid structure with the adjacent oligo dT. After launching the SMSDA, the CPEC platform was covered by more elongated polynucleotide chains and network, which acutely hampered the photoelectron transfer (eT) between photocathode and electron acceptor and caused a reduced photocurrent. The CPEC sensor possessed a satisfactory linear response from 6 × 10^-5-0.1 U and a low detection limit of 1.1 × 10^-5 U. The strategy offered a more specific and sensitive method for TdT activity assay. It was feasible in the field of TdT-based biochemical research, drug screening, and disease diagnosis.

A critical review on the use of potentiometric based biosensors for biomarkers detection

Potentiometric-based biosensors have the potential to advance the detection of several biological compounds and help in early diagnosis of various diseases. They belong to the portable analytical class of biosensors for monitoring biomarkers in the human body. They contain ion-sensitive membranes sensors can be used to determine potassium, sodium, and chloride ions activity while being used as a biomarker to gauge human health. The potentiometric based ion-sensitive membrane systems can be coupled with various techniques to create a sensitive tool for the fast and early detection of cancer biomarkers and other critical biological compounds. This paper discusses the application of potentiometric-based biosensors and classifies them into four major categories: photoelectrochemical potentiometric biomarkers, potentiometric biosensors amplified with molecular imprinted polymer systems, wearable potentiometric biomarkers and light-addressable potentiometric biosensors. This review demonstrated the development of several innovative biosensor-based techniques that could potentially provide reliable tools to test biomarkers. Some challenges however remain, but these can be removed by coupling techniques to maximize the testing sensitivity.

In situ creation of ZnO@CdS nanoflowers on ITO electrodes for sensitive photoelectrochemical detection of copper ions in blood

A highly selective and sensitive photoelectrochemical (PEC) detection method has been developed for the analysis of copper (Cu2+) ions using nanoflower-like ZnO@CdS heterojunctions, of which ZnO was first in situ grown onto the indium tin oxide electrodes by a hydrothermal method and then coated with CdS through the chemical bath deposition route. It was discovered that the ZnO@CdS heterojunction so formed could serve as a photosensitive catalyst with improved charge separation for visible-light-driven PEC responses. Enhanced visible-light harvesting of nanocomposites could also be expected with CdS as the visible-light sensitizer. Furthermore, the introduction of Cu2+ ions could cause a rational decrease in the photocurrents of nanocomposites through the specific interaction between CdS and Cu2+ ions. A ZnO@CdS heterojunction-based PEC sensor was thereby developed for the detection of Cu2+ ions in blood in the linear concentrations ranging from 0.50 to 80 nM, with a limit of detection of 0.18 nM. Such a heterojunction-based PEC detection platform constructed using two photocatalytic materials with matched band structures are promising for a wide range of applications for sensing Cu2+ ions in clinical diagnostics, food monitoring, and environmental analysis.

Differential Photoelectrochemical Biosensing Using DNA Nanospacers to Modulate Electron Transfer between Metal and Semiconductor Nanoparticles

As dynamic biorecognition agents such as functional nucleic acids become widely used in biosensing, there is a need for ultrasensitive signal transduction strategies, beyond fluorescence, that are robust and stable for operation in heterogeneous biological samples. Photoelectrochemical readout offers a pathway toward this goal as it offers the simplicity and scalability of electrochemical readout, in addition to compatibility with a broad range of nanomaterials used as labels for signal transduction. Here, a differential photoelectrochemical biosensing approach is reported, in which DNA nanospacers are used to program the response of two sensing channels. The differences in the motional dynamics of DNA probes immobilized on different channels are used to control the interaction between Au and TiO₂ nanoparticles positioned at the two ends of the DNA nanospacer to achieve differential signal generation. Depending on the composition of the DNA constructs (fraction of the DNA sequence i.e., double-stranded), the channels can be programmed to produce a signal-on or a signal-off response. Incident photon-to-current conversion efficiency, UV-vis spectroscopy, and flat-band potential measurement indicate that direct transfer of electrons between metallic and semiconductive nanoparticles is responsible for the signal-on response, and incident light absorption and steric hindrance are responsible for the signal-off response. The differential photoelectrochemical signal readout developed here increases the device sensitivity by up to three times compared to a single channel design and demonstrates a limit of detection of 800 aM.

A universal assay strategy for sensitive and simultaneous quantitation of multiplex tumor markers based on the stirring rod-immobilized DNA-LaMnO3 perovskite-metal ions encoded probes

It was extremely urgent to develop some simultaneous and sensitive biosensors for detecting multiplex serum tumor markers (TMs) for early screening of cancers. Herein, a multiplex assay was developed based on the DNA-LaMnO₃ (DNA-LMO) perovskite encoded probes and targets mediated competitive replacement strategy. Alpha fetoprotein (AFP), carcinoembryonic antigen (CEA) and prostate specific antigen (PSA) markers were employed as representative target TMs. Aptasensor is prepared by a series of DNA-LMO-M encode probes which were prepared by three hyperbranched DNA firstly immobilized on LMO encapsulating Pb, Cd or Cu ions. Then, three TMs aptamers were labeled on the stirring-rod and hybridized with the probes. After the developed encoded probes was incubated the TMs, the encoded probes corresponding to different TMs can be released into the supernatant through the competitive replacement. The inner metal ion can be simultaneously detected by square wave voltammetry corresponding to various TMs. Since the stirring rod can enrich many encoded probes containing a lot of metal ions, multiplex signal amplification can be realized. Due to the enrichment and easy separation of the stirring rod, the signal-to-noise ratio was also obviously improved and thus to results in good sensitivity and accuracy. Moreover, it took only 20 min to detect three targets which much faster than many same types of aptasensor. Under the optimal conditions, the low detection limit for CEA (3.6 × 10^-4 ng/mL), AFP (3.4 × 10^-4 ng/mL) and PSA (2.8 × 10^-4 ng/mL) were obtained. Therefore, this method is likely to be used for early and sensitive screening of tumors.

Highly Sensitive Photoelectrochemical Biosensor Based on Quantum Dots Sensitizing Bi2Te3 Nanosheets and DNA-Amplifying Strategies

In this work, Bi₂Te₃ nanosheets treated with N-vinyl-pyrrolidinone showed highly sufficient and stable photocurrent for being used as a novel photoactive material. Accordingly, with CdTe quantum dots (QDs) sensitizing Bi₂Te₃ nanosheets, photoelectrochemical (PEC) biosensor coupling of DNA-amplifying strategies was constructed for sensitive miRNA-21 detection. Initially, the Bi₂Te₃ nanosheets on the electrode have conductive surface states with dissipationless electronic property, thus providing a highly stable photocurrent and a large surface-to-volume ratio. Then, with the participation of target miRNA-21 and auxiliary DNA, strand displacement amplification took place, thereby opening substantial DNA hairpins for triggering the next hybridization chain reaction (HCR). Through the HCR, long DNA tails decorated with CdTe QDs could thus be assembled on the electrode for enhancing the photocurrent of Bi₂Te₃ nanosheets. As a result, the proposed PEC biosensor showed a wide detection range from 10 fM to 100 pM with a detection limit of 3.3 fM, displaying a promising avenue to construct simple, ultrasensitive, and stable analytical techniques and tremendous potential in bioanalysis and early clinical diagnosis.

A potentiometric resolved photoelectrochemical system based on CdS nanowires and SnNb2O6 nanosheets: a case application for dual biomarker analysis

A potentiometric-resolved PEC immunosensor was developed for dual-target detection.

Detection signal amplification strategies at nanomaterial-based photoelectrochemical biosensors

This review focusses on unique material modification and signal amplification strategies reported in developing photoelectrochemical biosensors with utmost sensitivity and selectivity.

Nanomaterials for Healthcare Biosensing Applications

In recent years, an increasing number of nanomaterials have been explored for their applications in biomedical diagnostics, making their applications in healthcare biosensing a rapidly evolving field. Nanomaterials introduce versatility to the sensing platforms and may even allow mobility between different detection mechanisms. The prospect of a combination of different nanomaterials allows an exploitation of their synergistic additive and novel properties for sensor development. This paper covers more than 290 research works since 2015, elaborating the diverse roles played by various nanomaterials in the biosensing field. Hence, we provide a comprehensive review of the healthcare sensing applications of nanomaterials, covering carbon allotrope-based, inorganic, and organic nanomaterials. These sensing systems are able to detect a wide variety of clinically relevant molecules, like nucleic acids, viruses, bacteria, cancer antigens, pharmaceuticals and narcotic drugs, toxins, contaminants, as well as entire cells in various sensing media, ranging from buffers to more complex environments such as urine, blood or sputum. Thus, the latest advancements reviewed in this paper hold tremendous potential for the application of nanomaterials in the early screening of diseases and point-of-care testing.

Optical Biosensors for Therapeutic Drug Monitoring

Therapeutic drug monitoring (TDM) is a fundamental tool when administering drugs that have a limited dosage or high toxicity, which could endanger the lives of patients. To carry out this monitoring, one can use different biological fluids, including blood, plasma, serum, and urine, among others. The help of specialized methodologies for TDM will allow for the pharmacodynamic and pharmacokinetic analysis of drugs and help adjust the dose before or during their administration. Techniques that are more versatile and label free for the rapid quantification of drugs employ biosensors, devices that consist of one element for biological recognition coupled to a signal transducer. Among biosensors are those of the optical biosensor type, which have been used for the quantification of different molecules of clinical interest, such as antibiotics, anticonvulsants, anti-cancer drugs, and heart failure. This review presents an overview of TDM at the global level considering various aspects and clinical applications. In addition, we review the contributions of optical biosensors to TDM.

Carbon dots-sensitized amorphous MoSx photoanode: Sequential electrodeposition preparation and dual amplified photoelectrochemical aptasensing of adenosine

The design and fabrication of high visible-light activated photoelectrode are essential to precisely detect biomolecule in biological system. Herein, an ultrasensitive photoelectrochemical (PEC) aptasensor for specific recognition of adenosine is established based on carbon dots sensitized-amorphous molybdenum sulfide (a-MoS_x/CDs) photoanode and dual amplification strategy. The heterostructured photoanode achieved by sequential electrodeposition reveals significantly boosted photocurrent with good stability and repeatability under visible light illumination, giving the credit to highly activated visible light absorption, uniform coverage and good electric contact to the underlying substrate, as well as the energy-band alignment between the two components. By stepwisely immobilizing complementary DNA probe (NH₂-DNA) and adenosine aptamer (Apt), followed by methylene blue (MB) binding with the guanine base on Apt, a dual amplified self-powered PEC aptasensor for adenosine detection is constructed. Based on the co-sensitization effect of CDs and MB, ultrasensitive and high-affinitive determination of adenosine is realized over the concentration range of 0.01 nM-1000 nM at 0 V (vs. SCE), with satisfactory stability and reproducibility. The detection limit is as low as 3.3 pM, demonstrating a performance even surpassing most of the sensors reported so far. The prospective application of the co-sensitized a-MoS_x photoanode for ultrasensitive aptasensing is highlighted in this work.

Wavelength distinguishable signal quenching and enhancing toward photoactive material 3,4,9,10-perylenetetracarboxylic dianhydride for simultaneous assay of dual metal ions

Photoelectrochemical (PEC) assay with low background, simple instrumentation and high sensitivity has deemed as one of the most potential strategies to simultaneous multi-component detection. How to distinguish photocurrent changes caused by various targets on a single sensing platform thus becomes the key issue to be resolved. Herein, we innovatively proposed a multiplex PEC biosensor based on wavelength distinguishable signal quenching and enhancing toward photoactive material 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) for simultaneous assay of dual metal ions. Briefly, S1 and S2 ssDNA containing sensitizer methylene blue and quencher ferrocene (termed as MB-S1 and Fc-S2), respectively, were first generated through target Pb²⁺ and Mg²⁺-induced DNAzyme-assisted target recycling, which thereafter were modified on PTCDA sensing platform specifically via host-guest recognition with β-cyclodextrin (β-CD). Interestingly, the sensitizer MB could enhance photocurrent of PTCDA under the excitation wavelength of 623 nm and 590 nm, respectively, while the quencher Fc just quencher the photocurrent of PTCDA under the excitation wavelength of 590 nm, thereby achieving wavelength distinguishable signal quenching and enhancing toward photoactive material PTCDA for simultaneous assay of dual metal ions. As a result, the conceived biosensor for Mg²⁺ and Pb²⁺ detection realized high sensitivity with detection limit of 0.3 pM and 0.3 nM, respectively. The proposed strategy not only for the first time achieved the discrimination of varied PEC signal caused by two targets with usage of sole photoelectric material, but also realized the simultaneous multiplex assay on a single sensing platform, providing a new way for constructing effective and sensitive PEC biosensor for multi-component detection.

Affinity-Based Detection of Biomolecules Using Photo-Electrochemical Readout

Detection and quantification of biologically-relevant analytes using handheld platforms are important for point-of-care diagnostics, real-time health monitoring, and treatment monitoring. Among the various signal transduction methods used in portable biosensors, photoelectrochemcial (PEC) readout has emerged as a promising approach due to its low limit-of-detection and high sensitivity. For this readout method to be applicable to analyzing native samples, performance requirements beyond sensitivity such as specificity, stability, and ease of operation are critical. These performance requirements are governed by the properties of the photoactive materials and signal transduction mechanisms that are used in PEC biosensing. In this review, we categorize PEC biosensors into five areas based on their signal transduction strategy: (a) introduction of photoactive species, (b) generation of electron/hole donors, (c) use of steric hinderance, (d) in situ induction of light, and (e) resonance energy transfer. We discuss the combination of strengths and weaknesses that these signal transduction systems and their material building blocks offer by reviewing the recent progress in this area. Developing the appropriate PEC biosensor starts with defining the application case followed by choosing the materials and signal transduction strategies that meet the application-based specifications.

A label-free PFP-based photoelectrochemical biosensor for highly sensitive detection of PARP-1 activity

Poly(ADP-ribose) polymerase-1 (PARP-1), as an original tumor marker, has aroused wide attention in recent years. However, only a few researches have been done for PARP-1 activity detection because PARP-1 is lack of optical or electrochemical property. In this work, a label-free and high-sensitive photoelectrochemical (PEC) biosensor for PARP-1 activity detection based on poly[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]fluorenylene phenylene (PFP) has been designed. To the best of our knowledge, it is the first time that PEC has been used to monitor PARP-1 activity. PARP-1 were activated under the function of activated dsDNA, as a result, branched polymers of ADP-ribose (PAR) with plentiful negative charge were formed in the presence of nicotinamide adenine dinucleotide (NAD⁺). Subsequently, positively charged PFP with good photoelectrochemical properties, were absorbed on PAR via electrostatic interaction. High photocurrent was produced under light induction, which was depended on the PARP-1 activity. The biosensor has a wide linear range from 0.01 to 2 U with a detection limit of 0.007 U. The strategy has been applied in breast and ovarian cancer cells to detection PARP-1 activity with approving results, which signifies that it is a promising tool for clinical diagnosis.

2D-porphrinic covalent organic framework-based aptasensor with enhanced photoelectrochemical response for the detection of C-reactive protein

In this study, a novel photoelectrochemical (PEC) aptasensor based on two-dimensional (2D) porphyrinic covalent organic frameworks (p-COFs) for the label-free detection of C-reactive protein (CRP) is presented. The obtained p-COFs possess high conductivity and an improved stability due to strong and rigid covalent linkages. The introduction of p-COFs hinder the recombination of electrons and holes, decreasing their band gap (E_g), thereby which improved the photocurrent conversion efficiency. Compared with pure porphyrin, p-COFs exhibited enhanced photocurrent intensity. An amplified photocurrent conversion efficiency and enhanced photocurrent results from H₂O₂, which act as active molecules and electron donors. As an unprecedented application of COFs in PEC bioanalysis, the detection of CRP with a PEC aptasensor is presented. The assembly of a CRP aptamer on the surface of Ag nanoparticles hinders the electron transfer, resulting in the decrease of the photocurrent response. This PEC aptasensor exhibits good analytical performances such as a rapid response, high stability, wide linear range and excellent selectivity, making COFs promising candidates for PEC bioanalysis.

A universal photoelectrochemical biosensor for dual microRNA detection based on two CdTe nanocomposites

A universal photoelectrochemical biosensor for dual microRNA detection has been successfully developed.

Red light-driven photoelectrochemical biosensing for ultrasensitive and scatheless assay of tumor cells based on hypotoxic AgInS2 nanoparticles

A novel red light-driven photoelectrochemical (PEC) biosensing platform based on hypotoxic ternary mercaptopropionic acid (MPA)-capped AgInS₂ nanoparticles (NPs) with excellent hydrophily and biocompatibility was proposed. AgInS₂ NPs as a PEC sensing substrate exhibited high photon-to-current conversion efficiency under red light excitation, generating an intensive photocurrent for enhancing the sensitivity of PEC determination. After the introduction of the amino-terminated sgc8c aptamer onto the interface of AgInS₂ NPs, the overexpressed protein tyrosine kinase-7 on the surface of lymphoblast CCRF-CEM cells could be efficiently captured. Using CCRF-CEM cell as a model analyte, an ultrasensitive PEC biosensor for scatheless assay of cells at the applied potential of 0.15 V under a red light excitation of 630 nm was designed based on the significant decline of photocurrent intensity after capturing CCRF-CEM cells. The developed PEC cytosensor demonstrated an excellent cell-capture ability, as well as a wide linear range from 1.5 × 10² to 3.0 × 10⁵ cells/mL and a low detection limit of 16 cells/mL for CCRF-CEM cells. In addition, the resulting assay method verified high selectivity and negligible cytotoxicity for cells assay. This work provided an alternative method for scatheless assay of tumor cells, which would have promising prospect in clinical diagnoses of cancer.

Gold Nanoparticle Couples with Entropy-Driven Toehold-Mediated DNA Strand Displacement Reaction on Magnetic Beads: Toward Ultrasensitive Energy-Transfer-Based Photoelectrochemical Detection of miRNA-141 in Real Blood Sample

Highly stable circulating microRNAs (miRNAs) are currently recognized as a novel potential biomarker for clinical cancer diagnosis in the early stage. However, limited by its low concentration, high sequence similarity, as well as the numerous interferences in body fluids, detection of miRNA in whole blood with sufficient selectivity and sensitivity is still challenging. Herein, we reported the integration of entropy-driven toehold-mediated DNA strand displacement (ETSD) reaction with magnetic beads (MB) toward the energy-transfer-based photoelectrochemical (PEC) detection of the prostate carcinoma (PCa) biomarker miRNA-141 in a real blood sample. In this protocol, the ETSD reaction was divided into two steps, and cooperated with magnetic separation, target extraction and amplification could be realized in a single test and ultrasensitive detection of miRNA-141 could be achieved in undiluted whole blood sample. This work proposed a new solution for sensitive biomolecular detection in a complex biological milieu and exhibited great promise for future clinical cancer diagnosis.