Developing an Acidic Residue Reactive and Sulfoxide-Containing MS-Cleavable Homobifunctional Cross-Linker for Probing Protein-Protein Interactions

Capturing Protein-Protein Interactions with Acidic Amino Acids Reactive Cross-Linkers

Acidic residues (Asp and Glu) have a high prevalence on protein surfaces, but cross-linking reactions targeting these residues are limited. Existing methods either require high-concentration coupling reagents or have low structural compatibility. Here a previously reported "plant-and-cast" strategy is extended to develop heterobifunctional cross-linkers. These cross-linkers first react rapidly with Lys sidechains and then react with Asp and Glu sidechains, in a proximity-enhanced fashion. The cross-linking reaction proceeds at neutral pH and room temperature without coupling reagents. The efficiency and robustness of cross-linking using model proteins, ranging from small monomeric proteins to large protein complexes are demonstrated. Importantly, it is shown that this type of cross-linkers are efficient at identifying protein-protein interactions involving acidic domains. The Cross-linking mass spectrometry (XL-MS) study with p53 identified 87 putative binders of the C-terminal domain of p53. Among them, SARNP, ZRAB2, and WBP11 are shown to regulate the expression and alternative splicing of p53 target genes. Thus, these carboxylate-reactive cross-linkers will further expand the power of XL-MS in the analysis of protein structures and protein-protein interactions.

Mechanism of autocatalytic activation during proteasome assembly

Many large molecular machines are too elaborate to assemble spontaneously and are built through ordered pathways orchestrated by dedicated chaperones. During assembly of the core particle (CP) of the proteasome, where protein degradation occurs, its six active sites are simultaneously activated via cleavage of N-terminal propeptides. Such activation is autocatalytic and coupled to fusion of two half-CP intermediates, which protects cells by preventing activation until enclosure of the active sites within the CP interior. Here we uncover key mechanistic aspects of autocatalytic activation, which proceeds through alignment of the β5 and β2 catalytic triad residues, respectively, with these triads being misaligned before fusion. This mechanism contrasts with most other zymogens, in which catalytic centers are preformed. Our data also clarify the mechanism by which individual subunits can be added in a precise, temporally ordered manner. This work informs two decades-old mysteries in the proteasome field, with broader implications for protease biology and multisubunit complex assembly.

A protein-protein interaction analysis tool for targeted cross-linking mass spectrometry

Protein networking is critical to understanding the biological functions of proteins and the underlying mechanisms of disease. However, identifying physical protein-protein interactions (PPIs) can be challenging. To gain insights into target proteins that interact with a particular disease, we need to profile all the proteins involved in the disease beforehand. Although the cross-linking mass spectrometry (XL-MS) method is a representative approach to identify physical interactions between proteins, calculating theoretical mass values for application to targeted mass spectrometry can be difficult. To address this challenge, our research team developed PPIAT, a web application that integrates information on reviewed human proteins, protein-protein interactions, cross-linkers, enzymes, and modifications. PPIAT leverages publicly accessible databases such as STRING to identify interactomes associated with target proteins. Moreover, it autonomously computes the theoretical mass value, accounting for all potential cross-linking scenarios pertinent to the application of XL-MS in SRM analysis. The outputs generated by PPIAT can be concisely represented in terms of protein interaction probabilities, complemented by findings from alternative analytical tools like Prego. These comprehensive summaries enable researchers to customize the results according to specific experimental conditions. All functions of PPIAT are available for free on the web application, making it a valuable tool for researchers studying protein-protein interactions.

Capturing the hierarchically assorted modules of protein-protein interactions in the organized nucleome

Nuclear proteins are major constituents and key regulators of nucleome topological organization and manipulators of nuclear events. To decipher the global connectivity of nuclear proteins and the hierarchically organized modules of their interactions, we conducted two rounds of cross-linking mass spectrometry (XL-MS) analysis, one of which followed a quantitative double chemical cross-linking mass spectrometry (in vivoqXL-MS) workflow, and identified 24,140 unique crosslinks in total from the nuclei of soybean seedlings. This in vivo quantitative interactomics enabled the identification of 5340 crosslinks that can be converted into 1297 nuclear protein-protein interactions (PPIs), 1220 (94%) of which were non-confirmative (or novel) nuclear PPIs compared with those in repositories. There were 250 and 26 novel interactors of histones and the nucleolar box C/D small nucleolar ribonucleoprotein complex, respectively. Modulomic analysis of orthologous Arabidopsis PPIs produced 27 and 24 master nuclear PPI modules (NPIMs) that contain the condensate-forming protein(s) and the intrinsically disordered region-containing proteins, respectively. These NPIMs successfully captured previously reported nuclear protein complexes and nuclear bodies in the nucleus. Surprisingly, these NPIMs were hierarchically assorted into four higher-order communities in a nucleomic graph, including genome and nucleolus communities. This combinatorial pipeline of 4C quantitative interactomics and PPI network modularization revealed 17 ethylene-specific module variants that participate in a broad range of nuclear events. The pipeline was able to capture both nuclear protein complexes and nuclear bodies, construct the topological architectures of PPI modules and module variants in the nucleome, and probably map the protein compositions of biomolecular condensates.

Cross-linking mass spectrometry discovers, evaluates, and corroborates structures and protein-protein interactions in the human cell

Significant recent advances in structural biology, particularly in the field of cryoelectron microscopy, have dramatically expanded our ability to create structural models of proteins and protein complexes. However, many proteins remain refractory to these approaches because of their low abundance, low stability, or-in the case of complexes-simply not having yet been analyzed. Here, we demonstrate the power of using cross-linking mass spectrometry (XL-MS) for the high-throughput experimental assessment of the structures of proteins and protein complexes. This included those produced by high-resolution but in vitro experimental data, as well as in silico predictions based on amino acid sequence alone. We present the largest XL-MS dataset to date, describing 28,910 unique residue pairs captured across 4,084 unique human proteins and 2,110 unique protein-protein interactions. We show that models of proteins and their complexes predicted by AlphaFold2, and inspired and corroborated by the XL-MS data, offer opportunities to deeply mine the structural proteome and interactome and reveal mechanisms underlying protein structure and function.

A tyrosine, histidine-selective bifunctional cross-linker for protein structure analysis

Chemical cross-linking mass spectrometry (XL-MS) significantly contributes to the analysis of protein structures and the elucidation of protein-protein interactions. Currently available cross-linkers mainly target N-terminus, lysine, glutamate, aspartate, and cysteine residues in protein. Herein, a bifunctional cross-linker, named [4,4'-(disulfanediylbis(ethane-2,1-diyl)) bis(1-methyl-1,2,4-triazolidine-3,5-dione)] (DBMT) has been designed and characterized aiming to extremely expand the application of XL-MS approach. DBMT is capable of selectively targeting tyrosine residue in protein via an electrochemical click reaction, and/or targeting histidine residue in protein in the presence of ¹O₂ generated under photocatalytic reaction. A novel cross-linking strategy based on this cross-linker has been developed and demonstrated using model proteins, which provides a complementary XL-MS tool analyzing protein structure, protein complexes, protein-protein interactions, and even protein dynamics.

Exploring an Alternative Cysteine-Reactive Chemistry to Enable Proteome-Wide PPI Analysis by Cross-Linking Mass Spectrometry

The development of MS-cleavable cross-linking mass spectrometry (XL-MS) has enabled the effective capture and identification of endogenous protein-protein interactions (PPIs) and their residue contacts at the global scale without cell engineering. So far, only lysine-reactive cross-linkers have been successfully applied for proteome-wide PPI profiling. However, lysine cross-linkers alone cannot uncover the complete PPI map in cells. Previously, we have developed a maleimide-based cysteine-reactive MS-cleavable cross-linker (bismaleimide sulfoxide (BMSO)) that is effective for mapping PPIs of protein complexes to yield interaction contacts complementary to lysine-reactive reagents. While successful, the hydrolysis and limited selectivity of maleimides at physiological pH make their applications in proteome-wide XL-MS challenging. To enable global PPI mapping, we have explored an alternative cysteine-labeling chemistry and thus designed and synthesized a sulfoxide-containing MS-cleavable haloacetamide-based cross-linker, Dibromoacetamide sulfoxide (DBrASO). Our results have demonstrated that DBrASO cross-linked peptides display the same fragmentation characteristics as other sulfoxide-containing MS-cleavable cross-linkers, permitting their unambiguous identification by MSⁿ. In combination with a newly developed two-dimensional peptide fractionation method, we have successfully performed DBrASO-based XL-MS analysis of HEK293 cell lysates and demonstrated its capability to complement lysine-reactive reagents and expand PPI coverage at the systems-level.

A New Structural Model of Apolipoprotein B100 Based on Computational Modeling and Cross Linking

ApoB-100 is a member of a large lipid transfer protein superfamily and is one of the main apolipoproteins found on low-density lipoprotein (LDL) and very low-density lipoprotein (VLDL) particles. Despite its clinical significance for the development of cardiovascular disease, there is limited information on apoB-100 structure. We have developed a novel method based on the “divide and conquer” algorithm, using PSIPRED software, by dividing apoB-100 into five subunits and 11 domains. Models of each domain were prepared using I-TASSER, DEMO, RoseTTAFold, Phyre2, and MODELLER. Subsequently, we used disuccinimidyl sulfoxide (DSSO), a new mass spectrometry cleavable cross-linker, and the known position of disulfide bonds to experimentally validate each model. We obtained 65 unique DSSO cross-links, of which 87.5% were within a 26 Å threshold in the final model. We also evaluated the positions of cysteine residues involved in the eight known disulfide bonds in apoB-100, and each pair was measured within the expected 5.6 Å constraint. Finally, multiple domains were combined by applying constraints based on detected long-range DSSO cross-links to generate five subunits, which were subsequently merged to achieve an uninterrupted architecture for apoB-100 around a lipoprotein particle. Moreover, the dynamics of apoB-100 during particle size transitions was examined by comparing VLDL and LDL computational models and using experimental cross-linking data. In addition, the proposed model of receptor ligand binding of apoB-100 provides new insights into some of its functions.

Alkynyl-Enrichable Carboxyl-Selective Crosslinkers to Increase the Crosslinking Coverage for Deciphering Protein Structures

The coverage of chemical crosslinking coupled with mass spectrometry (CXMS) is of great importance to determine its ability for deciphering protein structures. At present, N-hydroxysuccinimidyl (NHS) ester-based crosslinkers targeting lysines have been predominantly used in CXMS. However, they are not always effective for some proteins with few lysines. Other amino acid residues such as carboxyl could be crosslinked to complement lysines and improve the crosslinking coverage of CXMS, but the low intrinsic chemical reactivity of carboxyl compromises the application of carboxyl-selective crosslinkers for complex samples. To enhance the crosslinking efficiency targeting acidic residues and realize in-depth crosslinking analysis of complex samples, we developed three new alkynyl-enrichable carboxyl-selective crosslinkers with different reactive groups such as hydrazide, amino, and aminooxy. The crosslinking efficiencies of the three crosslinkers were systematically evaluated, giving the best reactivity of the amino-functionalized crosslinker BAP. Furthermore, BAP was extended to the crosslinking analysis of Escherichia coli lysate in combination with efficient crosslink enrichment. A total of 1291 D/E-D/E crosslinks involved in 392 proteins were identified under a false discovery rate (FDR) of ≤1%. Obvious structural complementarity of BAP was exhibited to the lysine-targeting crosslinker, facilitating the capability of CXMS for protein structure elucidation. To the best of our knowledge, this was the first time for the carboxyl-selective crosslinker to achieve proteome-wide crosslinking analysis of the whole cell lysate. Collectively, we believe that this work not only expands on a promising toolkit of CXMS targeting acidic residues but also provides a valuable guideline to advance the performance of carboxyl-selective crosslinkers.

Yeast PI31 inhibits the proteasome by a direct multisite mechanism

Proteasome inhibitors are widely used as therapeutics and research tools, and typically target one of the three active sites, each present twice in the proteasome complex. An endogeneous proteasome inhibitor, PI31, was identified 30 years ago, but its inhibitory mechanism has remained unclear. Here, we identify the mechanism of Saccharomyces cerevisiae PI31, also known as Fub1. Using cryo-electron microscopy (cryo-EM), we show that the conserved carboxy-terminal domain of Fub1 is present inside the proteasome's barrel-shaped core particle (CP), where it simultaneously interacts with all six active sites. Targeted mutations of Fub1 disrupt proteasome inhibition at one active site, while leaving the other sites unaffected. Fub1 itself evades degradation through distinct mechanisms at each active site. The gate that allows substrates to access the CP is constitutively closed, and Fub1 is enriched in mutant CPs with an abnormally open gate, suggesting that Fub1 may function to neutralize aberrant proteasomes, thereby ensuring the fidelity of proteasome-mediated protein degradation.

Shape shifting: The multiple conformational substates of the PTEN N-terminal PIP2 -binding domain

The Phosphatase and TENsin homolog deleted on chromosome 10 (PTEN) is a chief regulator of a variety of cellular processes including cell proliferation, migration, growth, and death. It is also a major tumor suppressor gene that is frequently mutated or lost under cancerous conditions. PTEN encodes a dual-specificity (lipid and protein) phosphatase that negatively regulates the PI3K/AKT/mTOR signaling pathway where the PIP2 -binding domain (PBD) regulates the lipid phosphatase function. Unfortunately, despite two decades of research, a full-length structure of PTEN remains elusive, leaving open questions regarding PTEN's disordered regions that mediate protein stability, post-translational modifications, protein-protein interactions, while also hindering the design of small molecules that can regulate PTEN's function. Here, we utilized a combination of crosslinking mass spectrometry, in silico predicted structural modeling (including AlphaFold2), molecular docking, molecular dynamics simulations, and residue interaction network modeling to obtain structural details and molecular insight into the behavior of the PBD of PTEN. Our study shows that the PBD exists in multiple conformations which suggests its ability to regulate PTEN's variety of functions. Studying how these specific conformational substates contribute to PTEN function is imperative to defining its function in disease pathogenesis, and to delineate ways to modulate its tumor suppressor activity.

An optimized protocol for in vitro and in cellulo structural determination of the multi-tRNA synthetase complex by cross-linking mass spectrometry

Despite recent advances in structural determination of individual proteins, elucidating the 3-dimensional architecture of large, multiprotein complexes remains challenging, partly because of issues related to structural integrity during purification. Here, we describe a protocol to determine the 3-dimensional architecture of the 11-constituent, multi-tRNA synthetase complex (MSC) using chemical cross-linking coupled with mass-spectrometry (XL-MS). The protocol does not require purification and is broadly applicable, facilitating determination of native structures in cell lysates and in non-disrupted cells as well as in purified complexes.

For complete details on the use and execution of this protocol, please refer to Khan et al. (2020).

•

Determines in vitro and in cellulo structures of multi-protein complexes

•

Facilitates analysis of multi-protein-complex architecture without purification

•

Reveals spatial relationships of disordered domains

•

Refines structures derived from X-ray crystallography which may be distorted by packing

Progress in methodologies and quality-control strategies in protein cross-linking mass spectrometry

Deciphering the interaction networks and structural dynamics of proteins is pivotal to better understanding their biological functions. Cross-linking mass spectrometry (XL-MS) is a powerful and increasingly popular technology that provides information about protein-protein interactions and their structural constraints for individual proteins and multiprotein complexes on a proteome-scale. In this review, we first assess the coverage and depth of the XL-MS technique by utilizing publicly available datasets. We then delve into the progress in XL-MS experimental and computational methodologies and examine different quality-control strategies reported in the literature. Finally, we discuss the progress in XL-MS applications along with the scope for future improvements.

Basic pH reversed-phase liquid chromatography (bRPLC) in combination with tip-based strong cation exchange (SCX-Tip), ReST, an efficient approach for large-scale cross-linked peptide analysis

Chemical cross-linking in combination with mass spectrometry (XL-MS) has emerged as a useful method for structural elucidation of proteins and protein complexes. Due to the low stoichiometry of cross-linked peptides, a specific enrichment method is always necessary prior to LC-MS/MS analysis, especially for complex samples. Currently, strong cation exchange chromatography (SCX), size exclusion chromatography (SEC), and affinity tag-based enrichment are among the widely used enrichment strategies. Herein, we present a two-dimensional strategy combining basic pH reversed-phase liquid chromatography (bRPLC) fractionation and tip-based SCX (SCX-Tip) enrichment, termed ReST, for the characterization of cross-linked peptides. We revealed the unbiased separation effects of the bRPLC in the cross-linked peptide fractionation. We optimized the enrichment conditions of SCX-Tip using well-designed cross-linked peptides. Taking advantage of the high resolution of bRPLC separation and the high enrichment efficiency of SCX-Tip, we were able to identify 43.6% more cross-linked peptides than the conventional SCX approach. The presented ReST is a simple and efficient approach for proteome-scale protein-protein interaction studies.

Characterizing Endogenous Protein Complexes with Biological Mass Spectrometry

Biological mass spectrometry (MS) encompasses a range of methods for characterizing proteins and other biomolecules. MS is uniquely powerful for the structural analysis of endogenous protein complexes, which are often heterogeneous, poorly abundant, and refractive to characterization by other methods. Here, we focus on how biological MS can contribute to the study of endogenous protein complexes, which we define as complexes expressed in the physiological host and purified intact, as opposed to reconstituted complexes assembled from heterologously expressed components. Biological MS can yield information on complex stoichiometry, heterogeneity, topology, stability, activity, modes of regulation, and even structural dynamics. We begin with a review of methods for isolating endogenous complexes. We then describe the various biological MS approaches, focusing on the type of information that each method yields. We end with future directions and challenges for these MS-based methods.

Protein interaction landscapes revealed by advanced in vivo cross-linking-mass spectrometry

Defining protein-protein interactions (PPIs) in their native environment is crucial to understanding protein structure and function. Cross-linking-mass spectrometry (XL-MS) has proven effective in capturing PPIs in living cells; however, the proteome coverage remains limited. Here, we have developed a robust in vivo XL-MS platform to facilitate in-depth PPI mapping by integrating a multifunctional MS-cleavable cross-linker with sample preparation strategies and high-resolution MS. The advancement of click chemistry-based enrichment significantly enhanced the detection of cross-linked peptides for proteome-wide analyses. This platform enabled the identification of 13,904 unique lysine-lysine linkages from in vivo cross-linked HEK 293 cells, permitting construction of the largest in vivo PPI network to date, comprising 6,439 interactions among 2,484 proteins. These results allowed us to generate a highly detailed yet panoramic portrait of human interactomes associated with diverse cellular pathways. The strategy presented here signifies a technological advancement for in vivo PPI mapping at the systems level and can be generalized for charting protein interaction landscapes in any organisms.

Structural basis for CSPG4 as a receptor for TcdB and a therapeutic target in Clostridioides difficile infection

C. difficile is a major cause of antibiotic-associated gastrointestinal infections. Two C. difficile exotoxins (TcdA and TcdB) are major virulence factors associated with these infections, and chondroitin sulfate proteoglycan 4 (CSPG4) is a potential receptor for TcdB, but its pathophysiological relevance and the molecular details that govern recognition remain unknown. Here, we determine the cryo-EM structure of a TcdB–CSPG4 complex, revealing a unique binding site spatially composed of multiple discontinuous regions across TcdB. Mutations that selectively disrupt CSPG4 binding reduce TcdB toxicity in mice, while CSPG4-knockout mice show reduced damage to colonic tissues during C. difficile infections. We further show that bezlotoxumab, the only FDA approved anti-TcdB antibody, blocks CSPG4 binding via an allosteric mechanism, but it displays low neutralizing potency on many TcdB variants from epidemic hypervirulent strains due to sequence variations in its epitopes. In contrast, a CSPG4-mimicking decoy neutralizes major TcdB variants, suggesting a strategy to develop broad-spectrum therapeutics against TcdB.

Chondroitin sulfate proteoglycan 4 (CSPG4) is a potential receptor for C. difficile toxin B (TcdB) during C. difficile infections (CDIs). Here, the cryo-EM structure of a TcdB–CSPG4 complex and CDI mouse models offer insights into CSPG4 role in CDIs and suggest a therapeutic strategy targeting TcdB.

Enabling Photoactivated Cross-Linking Mass Spectrometric Analysis of Protein Complexes by Novel MS-Cleavable Cross-Linkers

Cross-linking mass spectrometry (XL-MS) is a powerful tool for studying protein-protein interactions and elucidating architectures of protein complexes. While residue-specific XL-MS studies have been very successful, accessibility of interaction regions nontargetable by specific chemistries remain difficult. Photochemistry has shown great potential in capturing those regions because of nonspecific reactivity, but low yields and high complexities of photocross-linked products have hindered their identification, limiting current studies predominantly to single proteins. Here, we describe the development of three novel MS-cleavable heterobifunctional cross-linkers, namely SDASO (Succinimidyl diazirine sulfoxide), to enable fast and accurate identification of photocross-linked peptides by MSⁿ. The MSⁿ-based workflow allowed SDASO XL-MS analysis of the yeast 26S proteasome, demonstrating the feasibility of photocross-linking of large protein complexes for the first time. Comparative analyses have revealed that SDASO cross-linking is robust and captures interactions complementary to residue-specific reagents, providing the foundation for future applications of photocross-linking in complex XL-MS studies.

Tyrosine-Reactive Cross-Linker for Probing Protein Three-Dimensional Structures

Cross-linking mass spectrometry (XL-MS) has made significant progress in understanding the structure of protein and elucidating architectures of larger protein complexes. Current XL-MS applications are limited to targeting lysine, glutamic acid, aspartic acid, and cysteine residues. There remains a need for the development of novel cross-linkers enabling selective targeting of other amino acid residues in proteins. Here, a novel simple cross-linker, namely, [4,4'-(disulfanediylbis(ethane-2,1-diyl)) bis(1,2,4-triazolidine-3,5-dione)] (DBB), has been designed, synthesized, and characterized. This cross-linker can react selectively with tyrosine residues in protein through the electrochemical click reaction. The DBB cross-links produced the characteristic peptides before and after electrochemical reduction, thus permitting the simplified data analysis and accurate identification for the cross-linked products. This is the first time a cross-linker is developed for targeting tyrosine residues on protein without using photoirradiation or a metal catalyst. This strategy might potentially be used as a complementary tool for XL-MS to probe protein 3D structures, protein complexes, and protein-protein interaction.

Expanding the Cross-Link Coverage of a Carboxyl-Group Specific Chemical Cross-Linking Strategy for Structural Proteomics Applications

Carboxyl-group specific chemical cross-linking is gaining an increased interest as a structural mass spectrometry/structural proteomics technique that is complementary to the more commonly used amine-specific chemistry using succinimide esters. One of these protocols uses a combination of dihydrazide linkers and the coupling reagent DMTMM [4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium] chloride, which allows performing the reaction at neutral pH. The reaction yields two types of products, carboxyl-carboxyl cross-links that incorporate the dihydrazide linker and zero-length carboxyl-amine cross-links induced by DMTMM alone. Until now, it has not been systematically investigated how the balance between the two products is affected by experimental conditions. Here, we studied the role of the ratios of the two reagents (using pimelic dihydrazide and DMTMM) and demonstrate that the concentration of the two reagents can be systematically adjusted to favor one reaction product over the other. Using a set of five model proteins, we observed that the number of identified cross-linked peptides could be more than doubled by a combination of three different reaction conditions. We also applied this strategy to the bovine 20S proteasome and the Escherichia coli 70S ribosome, again demonstrating complementarity and increased cross-link coverage.

Mass spectrometry-based protein-protein interaction networks for the study of human diseases

A better understanding of the molecular mechanisms underlying disease is key for expediting the development of novel therapeutic interventions. Disease mechanisms are often mediated by interactions between proteins. Insights into the physical rewiring of protein-protein interactions in response to mutations, pathological conditions, or pathogen infection can advance our understanding of disease etiology, progression, and pathogenesis and can lead to the identification of potential druggable targets. Advances in quantitative mass spectrometry (MS)-based approaches have allowed unbiased mapping of these disease-mediated changes in protein-protein interactions on a global scale. Here, we review MS techniques that have been instrumental for the identification of protein-protein interactions at a system-level, and we discuss the challenges associated with these methodologies as well as novel MS advancements that aim to address these challenges. An overview of examples from diverse disease contexts illustrates the potential of MS-based protein-protein interaction mapping approaches for revealing disease mechanisms, pinpointing new therapeutic targets, and eventually moving toward personalized applications.

Cleavable Cross-Linkers and Mass Spectrometry for the Ultimate Task of Profiling Protein-Protein Interaction Networks in Vivo

Cross-linking mass spectrometry (XL-MS) has matured into a potent tool to identify protein-protein interactions or to uncover protein structures in living cells, tissues, or organelles. The unique ability to investigate the interplay of proteins within their native environment delivers valuable complementary information to other advanced structural biology techniques. This Review gives a comprehensive overview of the current possible applications as well as the remaining limitations of the technique, focusing on cross-linking in highly complex biological systems like cells, organelles, or tissues. Thanks to the commercial availability of most reagents and advances in user-friendly data analysis, validation, and visualization tools, studies using XL-MS can, in theory, now also be utilized by nonexpert laboratories.

Structural basis of CD4 downregulation by HIV-1 Nef

The HIV-1 Nef protein suppresses multiple immune surveillance mechanisms to promote viral pathogenesis and is an attractive target for the development of novel therapeutics. A key function of Nef is to remove the CD4 receptor from the cell surface by hijacking clathrin- and adaptor protein complex 2 (AP2)-dependent endocytosis. However, exactly how Nef does this has been elusive. Here, we describe the underlying mechanism as revealed by a 3.0-Å crystal structure of a fusion protein comprising Nef and the cytoplasmic domain of CD4 bound to the tetrameric AP2 complex. An intricate combination of conformational changes occurs in both Nef and AP2 to enable CD4 binding and downregulation. A pocket on Nef previously identified as crucial for recruiting class I MHC is also responsible for recruiting CD4, revealing a potential approach to inhibit two of Nef's activities and sensitize the virus to immune clearance.

An acidic residue reactive and disulfide bond-containing cleavable cross-linker for probing protein 3D structures based on electrochemical mass spectrometry

Cross-linking mass spectrometry (XL-MS) has attracted broad attention because of the capability to probe three-dimensional structure of proteins. Up to now, several amine-reactive cross-linkers have been developed for characterization of proteins and protein complexes. However, spatial information retrieved by XL-MS is still limited, partly because the strategies using an acidic residue reactive cross-linker have been rarely reported. In this paper, an acidic residue (e.g. aspartic acid, glutamic acid)-specific, disulfide bond-containing, cleavable cross-linker with a length of 13.1 Å, named 3,3'-dithiobis(propanoic dihydrazide), was presented for the first time. In addition, a novel approach using the cross-linker was proposed for unambiguous characterization of peptides and proteins with disulfide bonds. After cross-linked, the peptides could be electrochemically reduced, then characterized by high performance liquid chromatography mass spectrometry. For demonstration, the approach has been adopted to characterize the emideltide, insulin, and myoglobin, of which four pairs of intrachain cross-links have been successfully identified in myoglobin. The results showed that the cross-links displayed predictable fragmentation pattern upon collision induced dissociation (CID), thus admitting simplifying data analysis. In summary, this work introduces a novel type of cross-linker utilized for cross-linking and a new strategy to XL-MS technology for comprehensively understanding the three-dimensional structure of proteins.

Mass Spectrometry-Based Protein Footprinting for Higher-Order Structure Analysis: Fundamentals and Applications

Proteins adopt different higher-order structures (HOS) to enable their unique biological functions. Understanding the complexities of protein higher-order structures and dynamics requires integrated approaches, where mass spectrometry (MS) is now positioned to play a key role. One of those approaches is protein footprinting. Although the initial demonstration of footprinting was for the HOS determination of protein/nucleic acid binding, the concept was later adapted to MS-based protein HOS analysis, through which different covalent labeling approaches "mark" the solvent accessible surface area (SASA) of proteins to reflect protein HOS. Hydrogen-deuterium exchange (HDX), where deuterium in D2O replaces hydrogen of the backbone amides, is the most common example of footprinting. Its advantage is that the footprint reflects SASA and hydrogen bonding, whereas one drawback is the labeling is reversible. Another example of footprinting is slow irreversible labeling of functional groups on amino acid side chains by targeted reagents with high specificity, probing structural changes at selected sites. A third footprinting approach is by reactions with fast, irreversible labeling species that are highly reactive and footprint broadly several amino acid residue side chains on the time scale of submilliseconds. All of these covalent labeling approaches combine to constitute a problem-solving toolbox that enables mass spectrometry as a valuable tool for HOS elucidation. As there has been a growing need for MS-based protein footprinting in both academia and industry owing to its high throughput capability, prompt availability, and high spatial resolution, we present a summary of the history, descriptions, principles, mechanisms, and applications of these covalent labeling approaches. Moreover, their applications are highlighted according to the biological questions they can answer. This review is intended as a tutorial for MS-based protein HOS elucidation and as a reference for investigators seeking a MS-based tool to address structural questions in protein science.

Exploring Spacer Arm Structures for Designs of Asymmetric Sulfoxide-Containing MS-Cleavable Cross-Linkers

Cross-linking mass spectrometry (XL-MS) has become a powerful structural tool for defining protein-protein interactions (PPIs) and elucidating architectures of large protein assemblies. To advance XL-MS studies, we have previously developed a series of sulfoxide-containing MS-cleavable cross-linkers to facilitate the detection and identification of cross-linked peptides using multistage mass spectrometry (MSn). While current sulfoxide-based cross-linkers are effective for in vivo and in vitro XL-MS studies at the systems-level, new reagents are still needed to help expand PPI coverage. To this end, we have designed and synthesized six variable-length derivatives of disuccinimidyl sulfoxide (DSSO) to better understand the effects of spacer arm modulation on MS-cleavability, fragmentation characteristics, and MS identification of cross-linked peptides. In addition, the impact on cross-linking reactivity was evaluated. Moreover, alternative MS2-based workflows were explored to determine their feasibility for analyzing new sulfoxide-containing cross-linked products. Based on the results of synthetic peptides and a model protein, we have further demonstrated the robustness and predictability of sulfoxide chemistry in designing MS-cleavable cross-linkers. Importantly, we have identified a unique asymmetric design that exhibits preferential fragmentation of cross-links over peptide backbones, a desired feature for MSn analysis. This work has established a solid foundation for further development of sulfoxide-containing MS-cleavable cross-linkers with new functionalities.

Structural dynamics of the human COP9 signalosome revealed by cross-linking mass spectrometry and integrative modeling

The COP9 signalosome (CSN) is an evolutionarily conserved eight-subunit (CSN1-8) protein complex that controls protein ubiquitination by deneddylating Cullin-RING E3 ligases (CRLs). The activation and function of CSN hinges on its structural dynamics, which has been challenging to decipher by conventional tools. Here, we have developed a multichemistry cross-linking mass spectrometry approach enabled by three mass spectometry-cleavable cross-linkers to generate highly reliable cross-link data. We applied this approach with integrative structure modeling to determine the interaction and structural dynamics of CSN with the recently discovered ninth subunit, CSN9, in solution. Our results determined the localization of CSN9 binding sites and revealed CSN9-dependent structural changes of CSN. Together with biochemical analysis, we propose a structural model in which CSN9 binding triggers CSN to adopt a configuration that facilitates CSN-CRL interactions, thereby augmenting CSN deneddylase activity. Our integrative structure analysis workflow can be generalized to define in-solution architectures of dynamic protein complexes that remain inaccessible to other approaches.

High Confidence Identification of Cross-Linked Peptides by an Enrichment-Based Dual Cleavable Cross-Linking Technology and Data Analysis tool Cleave-XL

Cleavable cross-linking technology requires further MS/MS of the cleavable fragments for unambiguous identification of cross-linked peptides. These spectra are sometimes very ambiguous due to the sensitivity and complex fragmentation pattern of the peptides with the cross-linked residues. We recently reported a dual cleavable cross-linking technology (DUCCT), which can enhance the confidence in the identification of cross-linked peptides. The heart of this strategy is a novel dual mass spectrometry cleavable cross linker that can be cleaved preferentially by two differential tandem mass spectrometry methods, collision induced dissociation and electron transfer dissociation (CID and ETD). Different signature ions from two different mass spectra for the same cross-linked peptide helped identify the cross-linked peptides with high confidence. In this study, we developed an enrichment-based photocleavable DUCCT (PC-DUCCT-biotin), where cross-linked products were enriched from biological samples using affinity purification, and subsequently, two sequential tandem (CID and ETD) mass spectrometry processes were utilized. Furthermore, we developed a prototype software called Cleave-XL to analyze cross-linked products generated by DUCCT. Photocleavable DUCCT was demonstrated in standard peptides and proteins. Efficiency of the software tools to search and compare CID and ETD data of photocleavable DUCCT biotin in standard peptides and proteins as well as regular DUCCT in protein complexes from immune cells were tested. The software is efficient in pinpointing cross-linked sites using CID and ETD cross-linking data. We believe this new DUCCT and associated software tool Cleave-XL will advance high confidence identification of protein cross-linking sites and automated identification of low-resolution protein structures.

Photocaged Quinone Methide Crosslinkers for Light-Controlled Chemical Crosslinking of Protein-Protein and Protein-DNA Complexes

Small-molecule crosslinkers are invaluable for probing biomolecular interactions and for crosslinking mass spectrometry. Existing chemical crosslinkers target only a small selection of amino acids, while conventional photo-crosslinkers target almost all residues non-specifically, complicating data analysis. Herein, we report photocaged quinone methide (PQM)-based crosslinkers that target nine nucleophilic residues through Michael addition, including Gln, Arg, and Asn, which are inaccessible to existing chemical crosslinkers. PQM crosslinkers were used in vitro, in Escherichia coli, and in mammalian cells to crosslink dimeric proteins and endogenous membrane receptors. The heterobifunctional crosslinker NHQM could crosslink proteins to DNA, for which few crosslinkers exist. The photoactivatable reactivity of these crosslinkers and their ability to target multiple amino acids will enhance the use of chemical crosslinking for studies of protein-protein and protein-DNA networks and for structural biology.

ETD-Cleavable Linker for Confident Cross-linked Peptide Identifications

Peptide cross-links formed using the homobifunctional-linker diethyl suberthioimidate (DEST) are shown to be ETD-cleavable. DEST has a spacer arm consisting of a 6-carbon alkyl chain and it cleaves at the amidino groups created upon reaction with primary amines. In ETD MS² spectra, DEST cross-links can be recognized based on mass pairs consisting of peptide-NH₂^• and peptide+linker+NH₃ ions, and backbone cleavages are more equally distributed over the two constituent peptides compared with collisional activation. Dead ends that are often challenging to distinguish from cross-links are diagnosed by intense reporter ions. ETD mass pairs can be used in MS³ experiments to confirm cross-link identifications. These features provide a simple but reliable approach to identify cross-links that should facilitate studies of protein complexes.

A novel mass spectrometry-cleavable, phosphate-based enrichable and multi-targeting protein cross-linker

Chemical cross-linking mass spectrometry (XL-MS) is a powerful technology for obtaining protein structural information and studying protein-protein interactions. We report phospho-bisvinylsulfone (pBVS) as a novel water-soluble, MS-cleavable, phosphate-based enrichable and multi-targeting cross-linker. In this approach, the fragmentation of pBVS cross-linked peptides occurs in situ through retro-Michael addition. The phosphate group is successfully used as a small affinity tag to isolate cross-linked peptides from the highly abundant non-cross-linked peptides. In addition, the linker targets multiple types of amino acid residues, including cysteine, lysine and histidine. This method was applied to cross-link bovine serum albumin (BSA), myoglobin and Lbcpf1 demonstrating the ability to yield accurate and abundant information to facilitate protein structure elucidation.

Probing H2O2-mediated Structural Dynamics of the Human 26S Proteasome Using Quantitative Cross-linking Mass Spectrometry (QXL-MS)

Cytotoxic protein aggregation-induced impairment of cell function and homeostasis are hallmarks of age-related neurodegenerative pathologies. As proteasomal degradation represents the major clearance pathway for oxidatively damaged proteins, a detailed understanding of the molecular events underlying its stress response is critical for developing strategies to maintain cell viability and function. Although the 26S proteasome has been shown to disassemble during oxidative stress, its conformational dynamics remains unclear. To this end, we have developed a new quantitative cross-linking mass spectrometry (QXL-MS) workflow to explore the structural dynamics of proteasome complexes in response to oxidative stress. This strategy comprises SILAC-based metabolic labeling, HB tag-based affinity purification, a 2-step cross-linking reaction consisting of mild in vivo formaldehyde and on-bead DSSO cross-linking, and multi-stage tandem mass spectrometry (MSⁿ) to identify and quantify cross-links. This integrated workflow has been successfully applied to explore the molecular events underlying oxidative stress-dependent proteasomal regulation by comparative analyses of proteasome complex topologies from treated and untreated cells. Our results show that H₂O₂ treatment weakens the 19S-20S interaction within the 26S proteasome, along with reorganizations within the 19S and 20S subcomplexes. Altogether, this work sheds light on the mechanistic response of the 26S to acute oxidative stress, suggesting an intermediate proteasomal state(s) before H₂O₂-mediated dissociation of the 26S. The QXL-MS strategy presented here can be applied to study conformational changes of other protein complexes under different physiological conditions.

Cross-ID: Analysis and Visualization of Complex XL-MS-Driven Protein Interaction Networks

Protein interactions enable much more complex behavior than the sum of the individual protein parts would suggest and represents a level of biological complexity requiring full understanding when unravelling cellular processes. Cross-linking mass spectrometry has emerged as an attractive approach to study these interactions, and recent advances in mass spectrometry and data analysis software have enabled the identification of thousands of cross-links from a single experiment. The resulting data complexity is, however, difficult to understand and requires interactive software tools. Even though solutions are available, these represent an agglomerate of possibilities, and each features its own input format, often forcing manual conversion. Here we present Cross-ID, a visualization platform that links directly into the output of XlinkX for Proteome Discoverer but also plays well with other platforms by supporting a user-controllable text-file importer. The platform includes features like grouping, spectral viewer, gene ontology (GO) enrichment, post-translational modification (PTM) visualization, domains and secondary structure mapping, data set comparison, previsualization overlap check, and more. Validation of detected cross-links is available for proteins and complexes with known structure or for protein complexes through the DisVis online platform ( http://milou.science.uu.nl/cgi/services/DISVIS/disvis/ ). Graphs are exportable in PDF format, and data sets can be exported in tab-separated text files for evaluation through other software.

Proximity-enhanced SuFEx chemical cross-linker for specific and multitargeting cross-linking mass spectrometry

Chemical cross-linking mass spectrometry (CXMS) is being increasingly used to study protein assemblies and complex protein interaction networks. Existing CXMS chemical cross-linkers target only Lys, Cys, Glu, and Asp residues, limiting the information measurable. Here we report a "plant-and-cast" cross-linking strategy that employs a heterobifunctional cross-linker that contains a highly reactive succinimide ester as well as a less reactive sulfonyl fluoride. The succinimide ester reacts rapidly with surface Lys residues "planting" the reagent at fixed locations on protein. The pendant aryl sulfonyl fluoride is then "cast" across a limited range of the protein surface, where it can react with multiple weakly nucleophilic amino acid sidechains in a proximity-enhanced sulfur-fluoride exchange (SuFEx) reaction. Using proteins of known structures, we demonstrated that the heterobifunctional agent formed cross-links between Lys residues and His, Ser, Thr, Tyr, and Lys sidechains. This geometric specificity contrasts with current bis-succinimide esters, which often generate nonspecific cross-links between lysines brought into proximity by rare thermal fluctuations. Thus, the current method can provide diverse and robust distance restraints to guide integrative modeling. This work provides a chemical cross-linker targeting unactivated Ser, Thr, His, and Tyr residues using sulfonyl fluorides. In addition, this methodology yielded a variety of cross-links when applied to the complex Escherichia coli cell lysate. Finally, in combination with genetically encoded chemical cross-linking, cross-linking using this reagent markedly increased the identification of weak and transient enzyme-substrate interactions in live cells. Proximity-dependent cross-linking will dramatically expand the scope and power of CXMS for defining the identities and structures of protein complexes.

Development of a Novel Sulfoxide-Containing MS-Cleavable Homobifunctional Cysteine-Reactive Cross-Linker for Studying Protein-Protein Interactions

Cross-linking mass spectrometry (XL-MS) has become an emerging technology for defining protein-protein interactions (PPIs) and elucidating architectures of large protein complexes. Up to now, the most widely used cross-linking reagents target lysines. Although such reagents have been successfully applied to map PPIs at the proteome-wide scale, comprehensive PPI profiling would require additional cross-linking chemistries. Cysteine is one of the most reactive amino acids and an attractive target for cross-linking owing to its unique role in protein structures. Although sulfhydryl-reactive cross-linkers are commercially available, their applications in XL-MS studies remain sparse, likely due to the difficulty in identifying cysteine cross-linked peptides. Previously, we developed a new class of sulfoxide-containing MS-cleavable cross-linkers to enable fast and accurate identification of cross-linked peptides using multistage tandem mass spectrometry (MS n). Here, we present the development of a new sulfoxide-containing MS-cleavable homobifunctional cysteine-reactive cross-linker, bismaleimide sulfoxide (BMSO). We demonstrate that BMSO-cross-linked peptides display the same characteristic fragmentation pattern during collision-induced dissociation (CID) as other sulfoxide-containing MS-cleavable cross-linked peptides, thus permitting their simplified analysis and unambiguous identification by MS n. Additionally, we show that BMSO can complement amine- and acidic-residue-reactive reagents for mapping protein-interaction regions. Collectively, this work not only enlarges the toolbox of MS-cleavable cross-linkers with diverse chemistries, but more importantly expands our capacity and capability of studying PPIs in general.

Molecular Details Underlying Dynamic Structures and Regulation of the Human 26S Proteasome

The 26S proteasome is the macromolecular machine responsible for ATP/ubiquitin dependent degradation. As aberration in proteasomal degradation has been implicated in many human diseases, structural analysis of the human 26S proteasome complex is essential to advance our understanding of its action and regulation mechanisms. In recent years, cross-linking mass spectrometry (XL-MS) has emerged as a powerful tool for elucidating structural topologies of large protein assemblies, with its unique capability of studying protein complexes in cells. To facilitate the identification of cross-linked peptides, we have previously developed a robust amine reactive sulfoxide-containing MS-cleavable cross-linker, disuccinimidyl sulfoxide (DSSO). To better understand the structure and regulation of the human 26S proteasome, we have established new DSSO-based in vivo and in vitro XL-MS workflows by coupling with HB-tag based affinity purification to comprehensively examine protein-protein interactions within the 26S proteasome. In total, we have identified 447 unique lysine-to-lysine linkages delineating 67 interprotein and 26 intraprotein interactions, representing the largest cross-link dataset for proteasome complexes. In combination with EM maps and computational modeling, the architecture of the 26S proteasome was determined to infer its structural dynamics. In particular, three proteasome subunits Rpn1, Rpn6, and Rpt6 displayed multiple conformations that have not been previously reported. Additionally, cross-links between proteasome subunits and 15 proteasome interacting proteins including 9 known and 6 novel ones have been determined to demonstrate their physical interactions at the amino acid level. Our results have provided new insights on the dynamics of the 26S human proteasome and the methodologies presented here can be applied to study other protein complexes.

Developing a Multiplexed Quantitative Cross-Linking Mass Spectrometry Platform for Comparative Structural Analysis of Protein Complexes

Cross-linking mass spectrometry (XL-MS) represents a recently popularized hybrid methodology for defining protein-protein interactions (PPIs) and analyzing structures of large protein assemblies. In particular, XL-MS strategies have been demonstrated to be effective in elucidating molecular details of PPIs at the peptide resolution, providing a complementary set of structural data that can be utilized to refine existing complex structures or direct de novo modeling of unknown protein structures. To study structural and interaction dynamics of protein complexes, quantitative cross-linking mass spectrometry (QXL-MS) strategies based on isotope-labeled cross-linkers have been developed. Although successful, these approaches are mostly limited to pairwise comparisons. In order to establish a robust workflow enabling comparative analysis of multiple cross-linked samples simultaneously, we have developed a multiplexed QXL-MS strategy, namely, QMIX (Quantitation of Multiplexed, Isobaric-labeled cross (X)-linked peptides) by integrating MS-cleavable cross-linkers with isobaric labeling reagents. This study has established a new analytical platform for quantitative analysis of cross-linked peptides, which can be directly applied for multiplexed comparisons of the conformational dynamics of protein complexes and PPIs at the proteome scale in future studies.

Differential Tandem Mass Spectrometry-Based Cross-Linker: A New Approach for High Confidence in Identifying Protein Cross-Linking

Chemical cross-linking and mass spectrometry are now widely used to analyze large-scale protein-protein interactions. The major challenge in cross-linking approaches is the complexity of the mass spectrometric data. New approaches are required that can identify cross-linked peptides with high-confidence and establish a user-friendly analysis protocol for the biomedical scientific community. Here, we introduce a novel cross-linker that can be selectively cleaved in the gas phase using two differential tandem mass-spectrometric fragmentation methods, such as collision-induced or electron transfer dissociation (CID and ETD). This technique produces two signature mass spectra of the same cross-linked peptide, thereby producing high confidence in identifying the sites of interaction. Further tandem mass spectrometry can also give additional confidence on the peptide sequences. We demonstrate a proof-of-concept for this method using standard peptides and proteins. Peptides and proteins were cross-linked and their fragmentation characteristics were analyzed using CID and ETD tandem mass spectrometry. Two sequential cleavages unambiguously identified cross-linked peptides. In addition, the labeling efficiency of the new cross-linker was evaluated in macrophage immune cells after stimulation with the microbial ligand lipopolysaccharide and subsequent pulldown experiments with biotin-avidin affinity chromatography. We believe this strategy will help advance insights into the structural biology and systems biology of cell signaling.