Extracting Metallic Nanoparticles from Soils for Quantitative Analysis: Method Development Using Engineered Silver Nanoparticles and SP-ICP-MS

Evaluation of extraction and storage conditions for quantification and characterization of silver nanoparticles in complex samples by single particle-ICP-MS

The extraction of nanoparticles (NPs) from complex matrices and subsequent storage can potentially alter the NPs physicochemical properties and hinder cross-study comparisons. Most NPs extraction methods are designed and tested at high NPs concentrations, although (eco)toxicological and regulatory monitoring programs require methods capable of analyzing NPs at environmentally relevant concentrations (lower ppb range). In this study, we investigated how extraction methods affect the characteristics of PVP coated and citrate-stabilized silver NPs (AgNPs) spiked into soil, sewage sludge, and biological samples at environmentally relevant concentrations using Single Particle Inductively Coupled Plasma Mass Spectrometry spICP-MS). Further we investigated the impact of storage temperature (-80 °C - 21 °C) and storage duration (1-28 days) on the particle characteristics such as particle size. We found that aqueous AgNPs samples with low ionic strength media retained their original characteristics (like particle size, particle concentration and particle-based Ag mass) when preserved at 4 °C for up to 28 days. AgNPs dispersed in high ionic strength media were however better preserved at -80 °C. Among the extraction agents, tetrasodium pyrophosphate was efficient in extracting AgNPs from soil and sewage sludge matrices, while Proteinase K was most suitable for biological samples from organisms (earthworms or fish). Although our study focused only on AgNPs, it provides crucial information to aid interlaboratory comparisons and data interpretation for (eco)toxicological studies.

Direct evidence for the occurrence of indigenous cadmium-based nanoparticles in paddy soils

Speciation of heavy metal-based nanoparticles (NPs) in paddy soils greatly determines their fate and potential risk towards food safety. However, quantitative understanding of such distinctive species remains challenging, because they are commonly presented at trace levels (e.g., sub parts-per-million) and extremely difficult to be fractionated in soil matrices. Herein, we propose a state-of-art non-destructive strategy for effective extraction and quantification of cadmium (Cd)-NPs - the most widespread heavy metal in paddy soils - by employing single particle inductively coupled plasma mass spectrometry (spICP-MS) and tetrasodium pyrophosphate (TSPP) as the extractant. Acceptable extraction efficiencies (64.7-80.4 %) were obtained for spiked cadmium sulfide nanoparticles (CdS-NPs). We demonstrate the presence of indigenous Cd-NPs in all six Cd-contaminated paddy soils tested, with a number concentration ranging from 2.20 × 108 to 3.18 × 109 particles/g, representing 17.0-50.4 % of the total Cd content. Furthermore, semi-spherical and irregular CdS-NPs were directly observed as an important form of the Cd-NPs in paddy soils, as characterized by transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy (TEM-EDX). This research marks a significant step towards directly observing indigenous Cd-NPs at trace levels in paddy soil, offering a useful tool for quantitative understanding of the biogeochemical cycling of heavy metal-based NPs in complex matrices.

Determination of metallic nanoparticles in soils by means spICP-MS after a microwave-assisted extraction treatment

Current sample preparation strategies for nanomaterials (NMs) analysis in soils by means single particle inductively coupled plasma mass spectrometry have significant constrains in terms of accuracy, sample throughput and applicability (i.e., type of NMs and soils). In this work, strengths and weakness of microwave assisted extraction (MAE) for NMs characterization in soils were systematically investigated. To this end, different extractants were tested (ultrapure water; NaOH, NH4OH, sodium citrate and tetrasodium pyrophosphate) and MAE operating conditions were optimized by means of design of experiments. Next, the developed method was applied to different type of metallic(oid) nanoparticles (Se-, Ag-, Pt- and AuNPs) and soils (alkaline, acid, sandy, clayey, SL36, loam ERMCC141; sludge amended ERM483). Results show that Pt- and AuNPs are preserved and quantitatively extracted from soils in 6 min (12 cycles of 30 s each) inside an 800 W oven by using 20 mL of 0.1 M NaOH solution. This methodology is applicable to soils showing a wide range of physicochemical properties except for clay rich samples. If clay soil fraction is significant (>15%), NMs are efficiently retained in the soil thus giving rise to poor recoveries (<10%). The analysis of labile NMs such as Se- and AgNPs is not feasible by means this approach since extraction conditions favors dissolution. Finally, when compared to current extraction methodologies (e.g., ultrasound, cloud point extraction, etc.), MAE affords better or equivalent accuracies and precision as well as higher sample throughput due to treatment speed and the possibility to work with several samples simultaneously.

Advancing Simultaneous Extraction and Sequential Single-Particle ICP-MS Analysis for Metallic Nanoparticle Mixtures in Plant Tissues

Engineered nanoparticles (ENPs) have been increasingly used in agricultural operations, leading to an urgent need for robust methods to analyze co-occurring ENPs in plant tissues. In response, this study advanced the simultaneous extraction of coexisting silver, cerium oxide, and copper oxide ENPs in lettuce shoots and roots using macerozyme R-10 and analyzed them by single-particle inductively coupled plasma-mass spectrometry (ICP-MS). Additionally, the standard stock suspensions of the ENPs were stabilized with citrate, and the long-term stability (up to 5 months) was examined for the first time. The method performance results displayed satisfactory accuracies and precisions and achieved low particle concentration and particle size detection limits. Significantly, the oven drying process was proved not to impact the properties of the ENPs; therefore, oven-dried lettuce tissues were used in this study, which markedly expanded the applicability of this method. This robust methodology provides a timely approach to characterize and quantify multiple coexisting ENPs in plants.

Identification and quantification of trace metal(loid)s in water-extractable road dust nanoparticles using SP-ICP-MS

Resuspension of road dust is a major source of airborne particulate matter (PM) in urban environments. Inhalation of ultrafine particles (UFP; < 0.1 μm) represents a health concern due to their ability to reach the alveoli and be translocated into the blood stream. It is therefore important to characterize chemical properties of UFPs associated with vehicle emissions. We investigated the capability of Single-Particle ICP-MS (SP-ICP-MS) to quantify key metal(loid)s in nanoparticles (NPs; < 0.1 μm) isolated from road dust collected in Toronto, Canada. Water extraction was performed to separate the <1-μm fraction from two different road dust samples (local road vs. arterial road) and a multi-element SP-ICP-MS analysis was then conducted on the samples' supernatants. Based on the particle number concentrations obtained for both supernatants, the metal(loid)-containing NPs could be grouped in the following categories: high (Cu and Zn, > 1.3 × 1011 particles/L), medium (V, Cr, Ba, Pb, Sb, Ce, La), low (As, Co, Ni, < 4.6 × 109 particles/L). The limit of detection for particle number concentration was below 5.5 × 106 particles/L for most elements, except for Cu, Co, Ni, Cr, and V (between 0.9 and 7.7 × 107 particles/L). The results demonstrate that road dust contains a wide range of readily mobilizable metal(loid)-bearing NPs and that NP numbers may vary as a function of road type. These findings have important implications for human health risk assessments in urban areas. Further research is needed, however, to comprehensively assess the NP content of road dust as influenced by various factors, including traffic volume and speed, fleet composition, and street sweeping frequency. The described method can quickly characterize multiple isotopes per sample in complex matrices, and offers the advantage of rapid sample scanning for the identification of NPs containing potentially toxic transition metal(loid)s at a low detection limit.

Speciation of Selenium Nanoparticles and Other Selenium Species in Soil: Simple Extraction Followed by Membrane Separation and ICP-MS Determination

The application of selenium nanoparticle (SeNP)-based fertilizers can cause SeNPs to enter the soil environment. Considering the possible transformation of SeNPs and the species-dependent toxicity of selenium (Se), accurate analysis of SeNPs and other Se species present in the soil would help rationally assess the potential hazards of SeNPs to soil organisms. Herein, a novel method for speciation of SeNPs and other Se species in soil was established. Under the optimized conditions, SeNPs, selenite, selenate, and seleno amino acid could be simultaneously extracted from the soil with mixtures of tetrasodium pyrophosphate (5 mM) and potassium dihydrogen phosphate (1.2 μM), while inert Se species (mainly metal selenide) remained in the soil. Then, extracted SeNPs can be effectively captured by a nylon membrane (0.45 μm) and quantified by inductively coupled plasma mass spectrometry (ICP-MS). Other extracted Se species can be separated and quantified by high-performance liquid chromatography coupled with ICP-MS. Based on the difference between the total Se contents and extracted Se contents, the amount of metal selenide can be calculated. The limits of detection of the method were 0.02 μg/g for SeNPs, 0.05 μg/g for selenite, selenate, and selenocystine, and 0.25 μg/g for selenomethionine, respectively. Spiking experiments also showed that our method was applicable to real soil sample analysis. The present method contributes to understanding the speciation of Se in the soil environment and further estimating the occurrence and application risks of SeNPs.

Core-Shell Au@Nanoplastics as a Quantitative Tracer to Investigate the Bioaccumulation of Nanoplastics in Freshwater Ecosystems

Studies on the adverse effects of nanoplastics (NPs, particle diameter <1000 nm) including physical damage, oxidative stress, impaired cell signaling, altered metabolism, developmental defects, and possible genetic damage have intensified in recent years. However, the analytical detection of NPs is still a bottleneck. To overcome this bottleneck and obtain a reliable and quantitative distribution analysis in complex freshwater ecosystems, an easily applicable NP tracer to simulate their fate and behavior is needed. Here, size- and surface charge-tunable core-shell Au@Nanoplastics (Au@NPs) were synthesized to study the environmental fate of NPs in an artificial freshwater system. The Au core enables the quantitative detection of NPs, while the polystyrene shell exhibits NP properties. The Au@NPs showed excellent resistance to environmental factors (e.g., 1% hydrogen peroxide solution, simulating gastric fluid, acids, and alkalis) and high recovery rates (>80%) from seawater, lake water, sewage, waste sludge, soil, and sediment. Both positively and negatively charged NPs significantly inhibited the growth of duckweed (Lemna minor L.) but had little effect on the growth of cyanobacteria (Microcystis aeruginosa). In addition, the accumulation of positively and negatively charged NPs in cyanobacteria occurred in a concentration-dependent manner, with positively charged NPs more easily taken up by cyanobacteria. In contrast, negatively charged NPs were more readily internalized in duckweed. This study developed a model using a core-shell Au@NP tracer to study the environmental fate and behavior of NPs in various complex environmental systems.

Detection, distribution and environmental risk of metal-based nanoparticles in a coastal bay

Metal-based nanoparticles (NPs) attract increasing concerns because of their adverse effects on aquatic ecosystems. However, their environmental concentrations and size distributions are largely unknown, especially in marine environments. In this work, environmental concentrations and risks of metal-based NPs were examined in Laizhou Bay (China) using single-particle inductively coupled plasma-mass spectrometry (sp-ICP-MS). First, separation and detection approaches of metal-based NPs were optimized for seawater and sediment samples with high recoveries of 96.7% and 76.3%, respectively. Spatial distribution results showed that Ti-based NPs had the highest average concentrations for all the 24 stations (seawater, 1.78 × 108 particles/L; sediments, 7.75 × 1012 particles/kg), followed by Zn-, Ag-, Cu-, and Au-based NPs. For all the NPs in seawater, the highest abundance occurred around the Yellow River Estuary, resulting from a huge input from Yellow River. In addition, the sizes of metal-based NPs were generally smaller in sediments than those in seawater (22, 20, 17, and 16 of 22 stations for Ag-, Cu-, Ti-, and Zn-based NPs, respectively). Based on the toxicological data of engineered NPs, predicted no-effect concentrations (PNECs) to marine species were calculated as Ag at 72.8 ng/L < ZnO at 2.66 µg/L < CuO at 7.83 µg/L < TiO2 at 72.0 µg/L, and the actual PNECs of the detected metal-based NPs may be higher due to the possible presence of natural NPs. Station 2 (around the Yellow River Estuary) was assessed as "high risk" for Ag- and Ti-based NPs with risk characterization ratio (RCR) values of 1.73 and 1.66, respectively. In addition, RCRtotal values for all the four metal-based NPs were calculated to fully assess the co-exposure environmental risk, with 1, 20, and 1 of 22 stations as "high risk", "medium risk", and "low risk", respectively. This study helps to better understand the risks of metal-based NPs in marine environments.

Extraction of Silicon-Containing Nanoparticles from an Agricultural Soil for Analysis by Single Particle Sector Field and Time-of-Flight Inductively Coupled Plasma Mass Spectrometry

The increased use of silica and silicon-containing nanoparticles (Si-NP) in agricultural applications has stimulated interest in determining their potential migration in the environment and their uptake by living organisms. Understanding the fate and behavior of Si-NPs will require their accurate analysis and characterization in very complex environmental matrices. In this study, we investigated Si-NP analysis in soil using single-particle ICP-MS. A magnetic sector instrument was operated at medium resolution to overcome the impact of polyatomic interferences (e.g., ¹⁴N¹⁴N and ¹²C¹⁶O) on ²⁸Si determinations. Consequently, a size detection limit of 29 ± 3 nm (diameter of spherical SiO₂ NP) was achieved in Milli-Q water. Si-NP were extracted from agricultural soil using several extractants, including Ca(NO₃)₂, Mg(NO₃)₂, BaCl₂, NaNO₃, Na₄P₂O₇, fulvic acid (FA) and Na₂H₂EDTA. The best extraction efficiency was found for Na₄P₂O_7, for which the size distribution of Si-NP in the leachates was well preserved for at least one month. On the other hand, Ca(NO₃)₂, Mg(NO₃)₂ and BaCl₂ were relatively less effective and generally led to particle agglomeration. A time-of-flight ICP-MS was also used to examine the nature of the extracted Si-NP on a single-particle basis. Aluminosilicates accounted for the greatest number of extracted NP (~46%), followed by NP where Si was the only detected metal (presumably SiO₂, ~30%).

Converting Nanotoxicity Data to Information Using Artificial Intelligence and Simulation

Decades of nanotoxicology research have generated extensive and diverse data sets. However, data is not equal to information. The question is how to extract critical information buried in vast data streams. Here we show that artificial intelligence (AI) and molecular simulation play key roles in transforming nanotoxicity data into critical information, i.e., constructing the quantitative nanostructure (physicochemical properties)-toxicity relationships, and elucidating the toxicity-related molecular mechanisms. For AI and molecular simulation to realize their full impacts in this mission, several obstacles must be overcome. These include the paucity of high-quality nanomaterials (NMs) and standardized nanotoxicity data, the lack of model-friendly databases, the scarcity of specific and universal nanodescriptors, and the inability to simulate NMs at realistic spatial and temporal scales. This review provides a comprehensive and representative, but not exhaustive, summary of the current capability gaps and tools required to fill these formidable gaps. Specifically, we discuss the applications of AI and molecular simulation, which can address the large-scale data challenge for nanotoxicology research. The need for model-friendly nanotoxicity databases, powerful nanodescriptors, new modeling approaches, molecular mechanism analysis, and design of the next-generation NMs are also critically discussed. Finally, we provide a perspective on future trends and challenges.

Comparative study of extraction methods of silver species from faeces of animals fed with silver-based nanomaterials

Extractions methods based on ultrapure water, tetramethylammonium hydroxide (TMAH), and tetrasodium pyrophosphate (TSPP) were applied to faeces collected from two in vivo experiments of pigs and chickens fed with a silver-based nanomaterial to study the fate and speciation of silver. For TMAH extraction, cysteine and CaCl₂ were used to evaluate their stabilization effect on the silver forms. The analytical techniques single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS), hydrodynamic chromatography hyphenated to ICP-MS (HDC-ICP-MS) and asymmetric flow field flow fractionation coupled to ICP-MS (AF4-ICP-MS) were applied to the simultaneous detection of particulate and dissolved silver. Results have shown that water extraction was a suitable option to assess the environmental release of silver, with percentages of 3 and 9% for faeces of pigs and chickens, respectively. The use of TMAH extraction combined with SP-ICP-MS analysis was useful to characterize Ag-containing particles (less than 1%). Both stabilizers, cysteine and CaCl₂, have a similar effect on silver nanoparticle preservation for chicken faeces, whereas cysteine-Triton was better for pig samples. In any case, silver extraction efficiency with TMAH was low (39-42%) for both types of faeces due to a matrix effect. TSPP followed by ICP-MS enabled the fractionation of the silver in the faeces, with silver sulphide (41%) and ionic silver (62%) being the most abundant fractions.

Determination of the Particle Number Concentration, Size Distribution, and Species of Dominant Silver-Containing Nanoparticles in Soils by Single-Particle ICP-MS

The potential risk of various silver-containing nanoparticles (AgCNPs) in soils is related to the concentration, size, and speciation, but their determination remains a great challenge. Herein, we developed an effective method for determining the particle number, size, and species of dominant AgCNPs in soils, including nanoparticles of silver (Ag NPs), silver chloride (AgCl NPs), and silver sulfide (Ag₂S NPs). By ultrasonication wand-assisted tetrasodium pyrophosphate extraction, these AgCNPs were extracted efficiently from soils. Then, multistep selective dissolution of Ag NPs, AgCl NPs, and whole Ag NPs/AgCl NPs/Ag₂S NPs was achieved by 1% (v/v) H₂O₂, 5% (v/v) NH₃·H₂O, and 10 mM thiourea in 2% (v/v) acetic acid, respectively. Finally, the particle number concentration and size distribution of AgCNPs in the extracts and the remaining AgCNP particle number concentration after each dissolution were determined by single-particle inductively coupled plasma mass spectroscopy for speciation of the dominant AgCNPs. AgCNPs were detected in all five soil samples with the concentrations of 0.23-8.00 × 10⁷ particles/g and sizes of 16-110 nm. Ag₂S NPs were the main form of AgCNPs in the examined soils with the percentage range of 53.98-69.19%, followed by AgCl NPs (11.42-23.31%) and Ag NPs (7.78-16.19%). Our method offers a new approach for evaluating the occurrence and potential risk of AgCNPs in environmental soils.

Controlled fabrication of Ag@clay nanomaterials for ultrasensitive and rapid surface-enhanced Raman spectroscopic detection

The nanostructure of Ag nanoparticles (NPs) plays a critical role in their surface-enhanced Raman scattering (SERS) activity. Despite many efforts to tune the nanostructure of Ag NPs, it remains a great challenge as Ag NPs tend to agglomerate and their nanostructure is difficult to control. Herein, newly-discovered clay-surfactant-Ag⁺ materials and interfacial processes were developed and used to prepare uniform spherical Ag@synthetic hectorite (Ag@Hct) nanomaterials for ultrasensitive SERS assay. Sodium dodecyl sulfate (SDS), an anionic surfactant, acted as a bridge to conjugate the positively charged edge of Hct NPs and Ag⁺via electrostatic interaction to form the bridging nanostructure of Hct-SDS-Ag⁺, which promoted the uniform dispersion of Hct NPs. Following this, Ag⁺ was reduced to Ag⁰ by the reductant, and Ag⁰ grew on the surface of disc-like Hct NPs to form spherical Ag@Hct nanomaterials with an average particle size of ∼24 nm. The prepared Ag@Hct nanomaterials showed an ultrasensitive SERS response to methylene blue (MB) with a detection limit of 10^-12 M. The detection limit of MB in sewage was 10^-11 M. The prepared Ag@Hct nanomaterials also exhibited great SERS enhancement for malachite green and crystal violet. This work provides a novel and simple approach to prepare Ag@Hct nanomaterials with uniform spheres and adjustable particle size, allowing more sensitive and reproducible detection of MB.

Particle size-dependent effects of silver nanoparticles on swim bladder damage in zebrafish larvae

Particle size-dependent biological effects of silver nanoparticles (AgNPs) are of great interest; however, the mechanism of action of silver ions (Ag⁺) released from AgNPs concerning AgNP particle size remains unclear. Thus, we evaluated the influence of particle size (20, 40, 60, and 80 nm) on the acute 96-h bioaccumulation and toxicity (swim bladder damage) of AgNPs in zebrafish (Danio rerio) larvae, with a focus on the mechanism of action of Ag⁺ released from differently sized AgNPs. The 40- and 60-nm AgNPs were more toxic than the 20- and 80-nm versions in terms of inflammation and oxidative damage to the swim bladder, as indicated by inhibition of type 2 iodothyroxine deiodinase enzyme activity, mitochondrial injury, and reduced 30-50% adenosine triphosphate content. Furthermore, up-regulation and down-regulation of swim bladder development-related gene expression was not observed for pbx1a and anxa5, but up-regulation expression of shha and ihha was observed with no statistical significance. That 20-nm AgNPs were less toxic was attributed to their rapid elimination from larvae in comparison with the elimination of 40-, 60-, and 80-nm AgNPs; thus, less Ag⁺ was released in 20-nm AgNP-exposed larvae. Failed inflation of swim bladders was affected by released Ag⁺ rather than AgNPs themselves. Overall, we reveal the toxicity contribution of Ag⁺ underlying the observed size-dependent effects of AgNPs and provide a scientific basis for comprehensively assessing the ecological risk and biosafety of AgNPs.

Application of Isotopically Labeled Engineered Nanomaterials for Detection and Quantification in Soils via Single-Particle Inductively Coupled Plasma Time-of-Flight Mass Spectrometry

Finding and quantifying engineered nanomaterials (ENMs) in soil are challenging because of the abundance of natural nanomaterials (NNMs) with the same elemental composition, for example, TiO₂. Isotopically enriched ENMs may be distinguished from NNMs with the same elemental composition using single-particle inductively coupled plasma time-of-flight mass spectrometry (spICP-TOF-MS) to measure multiple isotopes simultaneously within each ENM and NNM in soil, but the minimum isotope enrichment needed for detection of ENMs in soil is not known. Here, we determined the isotope enrichment needed for ⁴⁷Ti-enriched TiO₂ ENMs to be detectable in soil and assessed the effects of weathering on those requirements for less soluble TiO₂ and more soluble CuO ENMs. The isotope-enriched ENMs were dosed into two different soils and were extracted and measured by spICP-TOF-MS after 1, 7, and 30 days. Isotope-enriched ENMs were recovered and detected for all three time points. The ⁴⁷Ti-enriched TiO₂ ENMs were detectable in Lufa 2.2 soil at a nominal dosed concentration of 10 mg-TiO₂ kg^-1 which is an environmentally relevant concentration in biosolid-amended soils. For distinguishing an ∼70 nm diameter TiO₂ ENM from TiO₂ NNMs in Lufa 2.2 soil, an ∼10 wt % ⁴⁷Ti isotope-enrichment was required, and this enrichment requirement increases as the particle size decreases. This study is the first to evaluate the tracking ability of isotope-enriched ENMs at an individual particle level in soil and provides guidance on the isotope enrichment requirements for quantification of ENMs made from Earth-abundant elements in soils.

Discrimination and Quantification of Soil Nanoparticles by Dual-Analyte Single Particle ICP-QMS

This study presents the new application of dual-analyte single particle inductively coupled plasma quadrupole mass spectrometry (spICP-QMS) to the discrimination and quantification of two typical soil nanoparticles (kaolinite and goethite nanoparticles, abbr. KNPs and GNPs) in three samples (SA, SB, and SC) with three detection events (Al unpaired event, Fe unpaired event, and paired event). SA was mainly composed of KNPs with a concentration of 28 443 ± 817 particle mL^-1 and a mean particle size of 140.7 ± 0.2 nm. SB was mainly composed of GNPs with a concentration of 39 283 ± 702 particle mL^-1 and a mean particle size of 141.8 ± 2.9. In SC, the concentrations of KNPs and GNPs were 22 4541 ± 1401 and 70 604 ± 1623 particle mL^-1, respectively, and the mean particle sizes of KNPs and GNPs were 140.7 ± 0.2 and 60.2 ± 0.3 nm, respectively. The accuracy of dual-analyte spICP-QMS was determined by spiking experiments, comparing these results with the measurements of other techniques, analyzing the samples in different SA and SB proportions and in different SC concentrations. Our results demonstrated that the dual-analyte spICP-QMS is a promising approach to distinguishing different kinds of natural NPs in soils.

Current Methods and Prospects for Analysis and Characterization of Nanomaterials in the Environment

Analysis and characterization of naturally occurring and engineered nanomaterials in the environment are critical for understanding their environmental behaviors and defining real exposure scenarios for environmental risk assessment. However, this is challenging primarily due to the low concentration, structural heterogeneity, and dynamic transformation of nanomaterials in complex environmental matrices. In this critical review, we first summarize sample pretreatment methods developed for separation and preconcentration of nanomaterials from environmental samples, including natural waters, wastewater, soils, sediments, and biological media. Then, we review the state-of-the-art microscopic, spectroscopic, mass spectrometric, electrochemical, and size-fractionation methods for determination of mass and number abundance, as well as the morphological, compositional, and structural properties of nanomaterials, with discussion on their advantages and limitations. Despite recent advances in detecting and characterizing nanomaterials in the environment, challenges remain to improve the analytical sensitivity and resolution and to expand the method applications. It is important to develop methods for simultaneous determination of multifaceted nanomaterial properties for in situ analysis and characterization of nanomaterials under dynamic environmental conditions and for detection of nanoscale contaminants of emerging concern (e.g., nanoplastics and biological nanoparticles), which will greatly facilitate the standardization of nanomaterial analysis and characterization methods for environmental samples.

Identification and characterisation of individual nanoplastics by scanning transmission X-ray microscopy (STXM)

Nanoplastics (NP) are of environmental and human health concern. We tested a novel NP extraction method and scanning transmission X-ray spectro-microscopy (STXM) in combination with near-edge X-ray absorption fine-structure spectroscopy (NEXAFS) to image and identify individual NP in environmental and food matrices. We (1) discussed the potential of STXM compared to other methods potentially suitable for NP analysis, (2) applied the method on NP suspensions of eight of the most common polymers, (3) analyzed environmental water and soil samples spiked with NP and (4) characterized NP in tea water infused in plastic teabags and unspiked soil samples. Here we show that STXM has methodological advantages and that polymers give characteristic spectra, which allows NP identification in environmental and food matrices. For soils we deliver a visual and spectroscopic characterization of NP, proving their presence and highlighting their diversity. Thus, STXM, can be used for the detection and characterisation of NP in different types of matrices.

Characterization of AgNPs and AuNPs in sewage sludge by single particle inductively coupled plasma-mass spectrometry

This study develops for the first time an analytical method for the characterization of silver and gold nanoparticles in sewage sludge. The evaluation of the effect of temperature, extracting agent and centrifugation speed and time on the extraction yield was carried out through a multifactorial analysis of variance which allows us to select 289 g, 5 min and 20 mM sodium pyrophosphate tetrabasic as optimal extraction conditions. Under these conditions, the analysis of the extract by single particle inductively coupled plasma-mass spectrometry provided recovery percentages of 70 ± 2% and 56 ± 1% for silver and gold nanoparticles, respectively. Moreover, the complementary results obtained upon analysis of these extracts by transmission electron microscopy and single particle inductively coupled plasma-mass spectrometry showed that the developed method did not modify the original size and shape of these nanoparticles during the extraction procedure. Size detection limits of 23 nm and 16 nm as well as number concentration limits of 3.12 × 10⁹ particles kg^-1 and 1.38 × 10⁹ particles kg^-1 were obtained for silver and gold nanoparticles, respectively. Moreover, a stability study of silver and gold nanoparticles in sewage sludge for 12 months showed differences between the two nanoparticle types. Although the sizes were not affected during the 12 months, silver nanoparticles underwent an oxidation process from 6 months onwards, which was reflected in an increase in the percentage of ionic silver from 14 ± 1% at 6 months to 24 ± 2% at 12 months. The developed methodology represents a simple, reliable and fast tool for detecting, quantifying and assessing the stability of nanoparticles in an important environmental sample such as sewage sludge.

Extraction and Quantification of Nanoparticulate Mercury in Natural Soils

Nanoparticulate mercury (Hg-NPs) are ubiquitous in nature. However, the lack of data on their concentration in soils impedes reliable risk assessments. This is due to the analytical difficulties resulting from low ambient Hg concentrations and background interferences of heterogeneous soil components. Here, coupled to single particle inductively coupled plasma-mass spectrometry (spICP-MS), a standardized protocol was developed for extraction and quantification of Hg-NPs in natural soils with a wide range of properties. High particle number-, particle mass-, and total mass-based recoveries were obtained for spiked HgS-NPs (74-120%). Indigenous Hg-NPs across soils were within 10⁷-10¹¹ NPs g^-1, corresponding to 3-40% of total Hg on a mass basis. Metacinnabar was the primary Hg species in extracted samples from the Wanshan mercury mining site, as characterized by X-ray absorption spectroscopy and transmission electron microscopy. In agreement with the spICP-MS analysis, electron microscopy revealed comparable size distribution for nanoparticles larger than 27 nm. These indigenous Hg-NPs contributed to 5-65% of the measured methylmercury in soils. This work paves the way for experimental determinations of indigenous Hg-NPs in natural soils, which is critical to understand the biogeochemical cycling of mercury and thereby the methylation processes governing the public exposure to methylmercury.

Titanium dioxide nanoparticles assessment in seaweeds by single particle inductively coupled plasma - Mass spectrometry

In this study, a first attempt for isolating and determining (characterising) background levels of titanium dioxide nanoparticles (TiO₂ NPs) in seaweed has been developed by using single particle inductively coupled plasma - mass spectrometry (SP-ICP-MS). Seaweeds were processed using an optimised ultrasound assisted extraction (UAE) procedure based on tetramethylammonium hydroxide (TMAH) before dilution and SP-ICP-MS analysis. The effect of the TMAH percentage in the extracting solution, as well as the volume of extracting solution and sonication (extraction) time, has been fully assessed. Additional experiments also showed that TiO₂ NPs were quantitatively released from the seaweed matrix in one UAE step since the analysis of residues gave TiO₂ NPs concentrations lower than the limit of quantification (LOQ) of the method. Validation of the method with 50 and 100 nm TiO₂ NPs (10 μg L^-1 as Ti) showed good analytical recovery (115% and 112% for 50 and 100 nm TiO₂ NPs, respectively), and good reproducibility (2% for size and 16% for number of TiO₂ NPs). Experiments regarding TiO₂ NPs stability showed that the extracted NPs are stable since there were not changes on the number of TiO₂ NPs and TiO₂ NPs size distributions when exposing TiO₂ NPs standards to the optimised extractive conditions.

Piezo-responsive bismuth ferrite nanoparticle-mediated catalytic degradation of rhodamine B and pathogenic E. coli in aqueous medium and its extraction using external magnetic stimulation after successful treatment

Piezocatalytic bismuth ferrite nanoparticles (BFO) were used for the degradation of organic dye (RhB) and pathogenic bacteria (E. coli), then extracted using external magnetic stimulation after the successful operation.

Fate and removal of silver nanoparticles during sludge conditioning and their impact on soil health after simulated land application

The growing use of silver nanoparticles (AgNPs) in personal care products and clothing has increased their concentrations in wastewater and subsequently in sludge raising concerns about their fate and toxicity during wastewater treatment and after land application of sludge. This research investigated the fate and removal of AgNPs during chemical conditioning of anaerobically digested sludge and their impact on soil bacteria and health after land application. Ferric chloride (FeCl₃), alum (Al₂ (SO₄)₃ • (14-18) H₂O), and synthetic (polyacrylamide) polymer were used for sludge conditioning. All conditioners effectively removed AgNPs from the liquid phase and concentrated them in sludge solids. Concentration analyses showed that out of 53.0 mg/L of silver in the sludge, only 0.1 to 0.003 mg/L of silver remained in the sludge supernatant after conditioning and 12 to 20% of this value were particulates. Morphological analyses also showed that AgNPs went through physical, chemical, and morphological changes in sludge that were not observed in nanopure water and the resulting floc structures and the incorporation of nanoparticles were different for each conditioner. The impact of conditioned AgNPs on the biological activities of soil was evaluated by investigating its impact on the presence of five important phyla (Acidobacteria, Actinobacteria, Bacteroidetes, Firmicutes and Proteobacteria). The results showed that AgNPs at a concentration of 20 mg AgNPs/g soil had a minimal impact on the presence and diversity of the assessed phyla. Also, using different chemicals for sludge conditioning resulted in different growth behavior of studied phyla. This study provides new insight into how the presence of AgNPs and different chemicals used for sludge conditioning might impact the soil biological activities and hence plant growth. The study also provides a solid basis for further research in the risk assessment of nanoparticle toxicity in biosolids amended soils.

Silver nanoparticles in aquatic sediments: Occurrence, chemical transformations, toxicity, and analytical methods

Sediments represent the major sink for released silver nanoparticles (AgNPs) in aquatic environments. It is well known that the environmental behavior and toxicity of AgNPs in sediments are governed by their specific chemical species instead of their total concentration. This review focuses on various chemical transformations of AgNPs in sediments, which have not been well outlined before. We first outline the concentrations of AgNPs in sediments. The predicted concentrations are 1-5 µg kg^-1 in most model studies. Once enter sediments, AgNPs are transformed to different species (e.g., Ag₂S, Ag-humic substance complexes, AgCl, and Ag⁺) during multiple chemical transformations, such as oxidative dissolution, sulfidation, chlorination, and complexation. Those chemical behaviors mitigate the toxicity of AgNPs by reducing their availability and decreasing Ag⁺ release. Benthic invertebrates and microbes are prone to be affected by AgNPs. AgNPs are found to be accumulated in sediment-dwelling organisms and transferred to higher trophic levels along the food web. Besides X-ray absorption spectroscopy, reliable separation procedures coupled with detection techniques, are powerful tools that characterize the speciation of AgNPs in sediments. More research is needed to investigate diverse chemical transformations in various sediments through development of novel techniques and mathematical models.

Simple Method for the Extraction and Determination of Ti-, Zn-, Ag-, and Au-Containing Nanoparticles in Sediments Using Single-Particle Inductively Coupled Plasma Mass Spectrometry

The quantitative analysis of nanoparticles (NPs) in the environment is significantly important for the exploration of the occurrence, fate, and toxicological behaviors of NPs and their subsequent environmental risks. Some protocols have been recommended for the separation and extraction of NPs that are potentially dispersed in complex environmental matrixes, e.g. sediments and soils, but they remain limited. However, certain factors that may significantly affect extraction efficiency have not been comprehensively explored. In this study, on the basis of the single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS) technique, a simple standardized protocol for separating and analyzing metal-containing NPs in sediment samples was developed. On consideration of the extraction efficiencies of indigenous NPs (Ti- and Zn-NPs) and spiked NPs (Ag- and Au-NPs) in sediments, sedimentation with a settling time of 6 h is recommended for the separation of NPs and large particles, and the optimal sediment to water ratio, ultrasonication power, time, and temperature are 0.4 mg/mL, 285 W, 20 min, and 15-25 °C, respectively. On the basis of the optimized method, the recoveries of spiked Ag and Au-NPs were 71.4% and 81.1%, respectively. The applicability of the optimal protocols was verified, and TOC was proved to be an important factor controlling the separation and extraction of NPs in environmental samples. The separation and extraction of NPs in elevated TOC samples can be improved by increasing the ultrasonication power, time, and temperature.

Separation and Analysis of Nanoscale Zero-Valent Iron from Soil

Nanoscale zero-valent iron (nZVI) has become one of the most used engineered nanoparticles for soil remediation. However, isolating nZVI particles from a complex soil matrix for their accurate particle characterizations and transport distance measurements is still challenging. Here, this study established a new analysis approach combining ultrasound-assisted solvent extraction, magnetic separation, and single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) analysis to isolate nZVI particles from soils and quantify their concentration and size. The interference from natural Fe-containing substances on nZVI analysis could be efficiently minimized by magnetic separation and dilution. After the optimization of extraction solvent type/concentration (i.e., 2.5 mM tetrasodium pyrophosphate) and ultrasonication time (i.e., 30 min), acceptable recoveries in both particle number (62.0 ± 10.8%-96.1 ± 4.8%) and Fe mass (70.6 ± 12.0%-119 ± 18%) could be achieved for different sizes (50 and 100 nm) and concentrations (50, 100, and 500 μg g^-1) of spiked nZVI from six soils. The detection limits of particle size and concentration were approximately 43.1 nm and 50 μg nZVI per gram soil, respectively. These results provide a feasible approach to quantify the nZVI concentration and size in complex soil matrices, which will allow the improvements to characterize and track the nZVI particles in the field, promote the use of nZVI particles for soil remediation, and better assess their environmental implications.

Enzyme digestion combined with SP-ICP-MS analysis to characterize the bioaccumulation of gold nanoparticles by mustard and lettuce plants

Plants can absorb and accumulate engineered nanomaterials (ENMs) through water and soil, providing a potential way for nanoparticles to be enriched in humans through the food chain. In this paper, a combination of enzymatic digestion method and SP-ICP-MS analysis was used to quantitatively characterize the enriched AuNPs in mustard and lettuce plants. The results showed that Macerozyme R-10 enzyme can extract AuNPs from plants without obvious aggregation/dissolution. Both mustard and lettuce plants can absorb and enrich the complete AuNPs to the above-ground organs, and the particle number concentrations detected are 1.24 × 107 particles L-1 and 4.39 × 107 particles L-1, respectively. With different exposure level of AuNPs(0.5 mg L-1,), a particle number concentration of 2.32 × 107 particles L-1 was detected in the stems of lettuce plants, while the mustard failed to transport AuNPs to the above-ground organs. The transport efficiency of Au ions by plants is higher than that of AuNPs, and the plants have stronger bioavailability for ions.

Soil invertebrate toxicity and bioaccumulation of nano copper oxide and copper sulphate in soils, with and without biosolids amendment

The fate, toxicity and bioaccumulation of copper oxide nanoparticles (nCuO) was investigated in soil, with and without biosolids amendment, through chronic exposures using the earthworm, Eisenia andrei, and the collembolan, Folsomia candida. The effects of copper sulphate (CuSO₄) were included so as to compare the behavior of nCuO to a readily soluble counterpart. The fate of nCuO was evaluated through characterization of dissolved and nano-particulate fractions (via single particle ICP-MS) as well as extractable Cu²⁺ throughout the duration of select tests. Neither Cu form was particularly toxic to F. candida, but effects on E. andrei reproduction were significant in all treatments (IC50 range: 98 - 149 mg Cu kg^-1 dry soil). There were no significant differences in toxicity between the Cu forms, nor in extractable Cu²⁺ activities, indicative that particle dissolution within the soil and, subsequent activity of Cu²⁺ was likely the primary mode of toxicity in the nCuO exposures. The presence of biosolids did not significantly alter toxicity of nCuO, but did affect Cu²⁺ activity over time. Bioaccumulation of total Cu in E. andrei when exposed to nCuO (kinetic bioaccumulation factor (BAF_k): 0.80 with biosolids and 0.81 without) was lower than exposure to CuSO₄ (BAF_k: 2.31 with biosolids and 1.12 without). Enhanced dark-field hyperspectral imaging showed accumulation of nCuO along the epidermis and gut of E. andrei, with trace amounts observed in muscle and chloragogenous tissue, providing evidence of nCuO translocation within the organism. The present study demonstrates that the current risk assessment approach for trace metals in the environment, based on substance solubility and bioavailability of the dissolved free ion, are applicable for nCuO exposure to soil invertebrates, but that the rate of particle dissolution in different soil environments is an important factor for consideration.

Ecotoxicological effects of copper oxide nanoparticles (nCuO) on the soil microbial community in a biosolids-amended soil

This study represents a holistic approach in assessing the effects of copper oxide nanoparticles (nCuO) on microbial health and community structure in soil amended with municipal biosolids. The biosolids were amended with nCuO (<50 nm) and mixed into a sandy loam soil at measured Cu concentrations of 27, 54, 123, 265 and 627 mg Cu kg^-1 soil. A suite of tests were used to assess the potential impact of nCuO on microbial growth, activity, and diversity. Microbial growth was determined by the heterotrophic plate count (HPC) method, while microbial diversity was assessed using both community level physiological profiling (CLPP) and 16S ribosomal DNA (rDNA) sequencing. Microbial activity was assessed by examining soil nitrification, organic matter decomposition, soil respiration (basal and substrate induced) and soil enzyme assays for dehydrogenase, phosphatase and β-glucosidase activities. As a readily soluble positive control, copper sulfate (CuSO₄) was used at measured Cu concentrations of 65, 140, 335 and 885 mg Cu kg^-1 soil for select tests, and at the highest concentration for the remaining tests. Analysis on Cu bioavailability revealed that extractable Cu²⁺ was higher in CuSO₄-spiked soils than nCuO-spiked soils. At a nCuO exposure concentration of ≤265 mg Cu kg^-1 soil, stimulatory effects were observed in nitrification, β-glucosidase and community level physiological profiling (CLPP) tests. nCuO showed no significant inhibitory effects on the soil microbial growth, activity or diversity at the highest concentration (i.e. 627 mg Cu kg^-1 soil), with the exception of the dehydrogenase (i.e. ≥27 mg Cu kg^-1 soil) and phosphatase (i.e. 627 mg Cu kg^-1 soil) enzyme activities. In contrast, inhibition from CuSO₄ at 885 mg Cu kg^-1 soil was observed in all tests with the exception of β-glucosidase enzyme activity. The growth of a Cu tolerant bacterium, Rhodanobacter sp., was observed at 885 mg Cu kg^-1 soil (CuSO₄).

Investigation of pore water and soil extraction tests for characterizing the fate of poorly soluble metal-oxide nanoparticles

Here we compared the efficiency of Cu extraction (dissolved + particulate) from two soils dosed with CuO nanoparticles (NPs) at 50 or 250 mg kg^-1 by pore water collection, and single- and multi-step soil extraction tests. Pore water collection recovered low levels of Cu (<0.18%, regardless of soil type or Cu dose). Single soil extraction by either CaCl₂ or DI water led to higher Cu recovery than pore water collection, but still <3% of total dose. These methods were useful for assessing the labile Cu ions pool. This fraction is controlled by Cu²⁺ dissolved from CuO NPs and it varies with time and soil type. Particulate Cu was poorly retrieved (<0.7%) by pore water extraction and by single-step soil extraction using CaCl₂ solution or water. Multi-step extraction including dispersing and metal-chelating agents allowed for simultaneous characterization of dissolved Cu (total ionic Cu²⁺, 24-49% of dosed Cu), extractable CuO NPs (reversibly attached, 15-26% of dosed Cu), and non-extractable CuO NPs (irreversibly attached, 36-50% of dosed Cu), and it could describe the aging of NPs along 30 d. This method extracted a significantly higher concentration of Cu than pore water collection and was less sensitive to method parameters (e.g. filtration). This multi-step method can reduce pore water extraction-related factors that may confound the interpretation of environmental exposure data in NPs studies, and describe upper limits of both exchangeable Cu²⁺ and dispersible CuO NPs in soil that can potentially become bioavailable to plants and organisms and thus provide a sounder basis for risks evaluations.

Titanium and zinc-containing nanoparticles in estuarine sediments: Occurrence and their environmental implications

Understanding the behavior and risk of nanoparticles (NPs) in the aquatic environment is currently limited by the lack of quantitative characterization of NPs in the environmental matrices, such as sediments. In this study, based on the single particle (SP)-ICP-MS technique, metal-containing NPs, including Ti- and Zn-containing NPs, were analyzed in sediments taken along the Yangtze Estuary. Combined with the traditional sequential extraction method that has been widely used for metal risk assessment, different single extraction methods were used to understand the association of NPs with different chemical fractions in sediments and their potential environmental implications. Ti-containing NPs, with an average size of 81 nm, ranged from 3.02 × 10⁷ parts/mg to 9.61 × 10⁷ parts/mg, and Zn-containing NPs, with an average size of 41 nm, ranged from 2.47 × 10⁶ parts/mg to 1.21 × 10⁷ parts/mg. Both correlation and redundancy analyses showed that particle concentrations of Ti-containing NPs in sediment were significantly correlated to the Ti-containing NPs in the residual fraction and salinity, indicating that Ti-containing NPs in sediments may be dominated by Ti-containing NPs in the residue fractions of sediments. Large amounts of these NPs may be released from the residual fraction that has been considered to be not bioavailable and "environmentally safe" in the traditional environmental risk assessment of metals in sediments. Zn-containing NPs, mostly associated with carbonates, were positively correlated to all the bioavailable fractions of Zn in sediments, suggesting that these NPs may be largely presented in the bioavailable fraction. This study showed that, vast numbers of NPs with minute sizes were present in estuarine sediments, and that they were associated with different chemical fractions with different potential environmental risks. The study findings call for further research to update the traditional risk assessment method.

Incidence of metal-based nanoparticles in the conventional wastewater treatment process

Metal-based nanoparticles (NPs) can be found in wastewater streams, which are significant pathways for the release of NPs to the environment. Determination of the NPs concentration in wastewater streams is important for performing appropriate ecotoxicological evaluations. The aim of this work was to determine the incidence of NPs from 13 different elements throughout the wastewater treatment process by using single particle inductively coupled plasma mass spectrometry (spICP-MS). The incidence was determined in samples of the influent, post-primary treatment and effluent of the activated sludge process, as well as in the reclaimed water of a full-scale wastewater treatment plant (WWTP). In addition, concentration of NPs was determined in the waste activated sludge and in the anaerobic digester. The concentration of metal-based NPs in the influent wastewater were between 1,600 and 10,700 ng/L for elements such as Ti, Fe, Ce, Mg, Zn and Cu, while that for Ni, Al, Ag, Au, Co and Cd was below 100 ng/L. Concentrations in reclaimed water ranged between 0.6 and 721 ng/L, ranked as Mg > Ti > Fe > Cu > Ni > Ce > Zn > Mn > Al  > Co > Ag > Cd  > Au. Results indicated that the activated sludge process and reclaimed water system removed 84-99% of natural and engineered metal-based NPs from influent to reclaimed water, except for Mg, Ni and Cd where the removal ranged from 70 to 78%. The highest concentrations of NPs were found in the waste activated sludge and anaerobic sludge, ranging from 0.5 to 39,900 ng/L. The size distribution of NPs differed in different wastewater streams within the WWTP, resulting in smaller particles in the effluent (20-180 nm) than in the influent (23-233 nm) for most elements. Conversely, NPs were notably larger in the waste activated sludge samples than in the anaerobic sludge or wastewater, since conditions in the secondary treatment lead to precipitation of several metal-based NPs. The incidence of metal-based NPs from 13 elements in wastewater decreased significatively after the conventional wastewater treatment train. However, anaerobic digesters store high NPs concentrations. Hence, the disposal of sludge needs to take this into account to evaluate the risk of the release of NPs to the environment.

A Sensitive Single Particle-ICP-MS Method for CeO2 Nanoparticles Analysis in Soil during Aging Process

The increasing prevalence of products that incorporate engineered nanoparticles (ENPs) has prompted efforts to investigate the potential release, environmental fate, and exposure of the ENPs. However, the investigation of cerium dioxide nanoparticles (CeO₂ NPs) in soil has remained limited, owing to the analytical challenge from the soil's complex nature. In this study, this challenge was overcome by applying a novel single particle-inductively coupled plasma-mass spectrometry (SP-ICP-MS) methodology to detect CeO₂ NPs extracted from soil, utilizing tetrasodium pyrophosphate (TSPP) aqueous solution as an extractant. This method is highly sensitive for determining CeO₂ NPs in soil, with detection limits of size and concentration of 15 nm and 194 NPs mL^-1, respectively. Extraction efficiency was sufficient in the tested TSPP concentration range from 1 mM to 10 mM at a soil-to-extractant ratio 1:100 (g mL^-1) for the extraction of CeO₂ NPs from the soil spiked with CeO₂ NPs. The aging study demonstrated that particle size, size distribution, and particle concentration underwent no significant change in the aged soils for a short period of one month. This study showed an efficient method capable of extracting and accurately determining CeO₂ NPs in soil matrices. The method can serve as a useful tool for nanoparticle analysis in routine soil tests and soil research.

Natural TiO2-Nanoparticles in Soils: A Review on Current and Potential Extraction Methods

The monitoring of anthropogenic TiO2-nanoparticles in soils is challenged by the knowledge gap on their characteristics of the large natural TiO2-nanoparticle pool. Currently, no efficient method is available for characterizing natural TiO2-nanoparticles in soils without an extraction procedure. Considering the reported diversity of extraction methods, the following article reviews and discusses their potential for TiO2 from soils, focusing on the selectivity and the applicability to complex samples. It is imperative to develop a preparative step reducing analytical interferences and producing a stable colloidal dispersion. It is suggested that an oxidative treatment, followed by alkaline conditioning and the application of dispersive agents, achieve such task. This enables the further separation and characterization through size or surface-based separation (i.e., hydrodynamic fractionation methods, filtration or sequential centrifugation). Meanwhile, cloud point extraction, gel electrophoresis, and electrophoretic deposition have been studied on various nanoparticles but not on TiO2-nanoparticles. Furthermore, industrially applied methods in, for example, kaolin processing (flotation and flocculation) are interesting but require further improvements on terms of selectivity and applicability to soil samples. Overall, none of the current extraction methods is sufficient toward TiO2; however, further optimization or combination of orthogonal techniques could help reaching a fair selectivity toward TiO2.

Fates of Au, Ag, ZnO, and CeO2 Nanoparticles in Simulated Gastric Fluid Studied using Single-Particle-Inductively Coupled Plasma-Mass Spectrometry

The increasing use of engineered nanoparticles (ENPs) in many industries has generated significant research interest regarding their impact on the environment and human health. The major routes of ENPs to enter the human body are inhalation, skin contact, and ingestion. Following ingestion, ENPs have a long contact time in the human stomach. Hence, it is essential to know the fate of the ENPs under gastric conditions. This study aims to investigate the fate of the widely used nanoparticles Ag-NP, Au-NP, CeO2-NP, and ZnO-NP in simulated gastric fluid (SGF) under different conditions through the application of single-particle inductively coupled plasma-mass spectrometry (SP-ICP-MS). The resulting analytical methods have size detection limits for Ag-NP, Au-NP, ZnO-NP, and CeO2-NP from 15 to 35 nm, and the particle concentration detection limit is 135 particles/mL. Metal ions corresponding to the ENPs of interest were detected simultaneously with detection limits from 0.02 to 0.1 μg/L. The results showed that ZnO-NPs dissolved completely and rapidly in SGF, whereas Au-NPs and CeO2-NPs showed apparent aggregation and did not dissolve significantly. Both aggregation and dissolution were observed in Ag-NP samples following exposure to SGF. The size distributions and concentrations of ENPs were affected by the original ENP concentration, ENP size, the contact time in SGF, and temperature. This work represents a significant advancement in the understanding of ENP characteristics under gastric conditions.

Development of a sequential extraction and speciation procedure for assessing the mobility and fractionation of metal nanoparticles in soils

This study describes the development of a sequential extraction procedure for the evaluation of metal nanoparticle mobility and bioaccessibility in soils. The procedure, that was developed using gold nanoparticles (AuNPs) as model species, relies on the fractionation of nanoparticles by sequentially dissolving soil matrix components (carbonates, metal oxides, organic matter and mineral phases) in order to release the entrapped nanoparticle species in the extract solution. By summing up the concentration of AuNPs recovered in each fraction it was found that 93.5% of the spiked AuNP concentration could be recovered which satisfactorily represents the nominal AuNP concentration in the soil. The efficiency of the procedure was found to depend on several procedural artifacts related to the separation of AuNPs from soil colloids and the reactivity of the extraction reagents with AuNPs and their precursor metal ions. Based on the results obtained a protocol for the speciation of the AuNPs and Au ions in the soil sample was also developed. The results of the study show that both AuNPs and Au ions are mainly associated with soil organic matter, which significantly reduces their mobility, while a small amount (<10%) is associated with metal oxides which are more mobile and potentially bioaccessible. The developed procedure provides a springboard for further development of sequential extraction procedures of metal nanoparticles in soils that could be used to assess both the exposure and release of metal nanoparticles and their precursor metal ions in the environment (as total extractable concentration) as well as provide evidence regarding their bioaccessibility and potential bioavailability by determining the concentration of nanoparticles in each specific soil fraction.

To-Do and Not-To-Do in Model Studies of the Uptake, Fate and Metabolism of Metal-Containing Nanoparticles in Plants

Due to the increasing release of metal-containing nanoparticles into the environment, the investigation of their interactions with plants has become a hot topic for many research fields. However, the obtention of reliable data requires a careful design of experimental model studies. The behavior of nanoparticles has to be comprehensively investigated; their stability in growth media, bioaccumulation and characterization of their physicochemical forms taken-up by plants, identification of the species created following their dissolution/oxidation, and finally, their localization within plant tissues. On the basis of their strong expertise, the authors present guidelines for studies of interactions between metal-containing nanoparticles and plants.

Multistep Method to Extract Moderately Soluble Copper Oxide Nanoparticles from Soil for Quantification and Characterization

The objective of this study is to assess how method parameters impact the extraction of moderately soluble CuO nanoparticles (NPs) from a standard natural soil (LUFA 2.1) suitable for chemical analysis. The extraction procedure is comprised of three steps: (i) preconditioning the soil to increase the sodium adsorption ratio, (ii) extracting colloids/NPs from the soil matrix using sonication and a dispersing agent, and (iii) separating the dissolved and nanoparticulate CuO fractions using cloud point extraction. Method parameters of the extraction procedure, including sonication, number of extraction cycles, and dispersing agent, were adjusted to achieve the highest extraction of CuO NPs, while minimizing dissolution. The maximum recovery of CuO NPs ranged from 31% to 42% for an amended concentration range of 10-250 mg-Cu (kg soil)^-1 using a preconditioning step to exchange divalent cations for monovalent ions, 0.2% carboxymethyl cellulose (CMC) 700 kg mol^-1 as the dispersing agent, probe sonication for 1 min, 3 extraction cycles, and a 1:10 soil-to-liquid ratio. CuO NPs that are polyvinylpyrrolidone (PVP)-coated with a greater stability against aggregation had significantly higher extractability and dissolution. This procedure is the first to effectively extract moderately soluble NPs from soil and experimentally separate them from their dissolved fraction and can be applied to other moderately soluble metal containing natural, incidental, or engineered NPs in soil.

Silver nanoparticles: Toxicity in model organisms as an overview of its hazard for human health and the environment

Silver nanoparticles (AgNPs) have attracted remarkable attention due to their powerful antimicrobial action as well as their particular physicochemical properties. This has led to their application in a wide variety of products with promising results. However, their interaction with the environment and toxicity in live terrestrial or aquatic organisms is still a matter of intense debate. More detailed knowledge is still required about the toxicity of AgNPs, their possible uptake mechanisms and their adverse effects in live organisms. Several studies have reported the interactions and potential negative effects of AgNPs in different organisms. In this review, we report and discuss the current state of the art and perspectives for the impact of AgNPs on different organisms present in the environment. Recent progress in interpreting uptake, translocation and accumulation mechanisms in different organisms and/or living animals are discussed, as well as the toxicity of AgNPs and possible tolerance mechanisms in live organisms to cope with their deleterious effects. Finally, we discuss the challenges of accurate physicochemical characterization of AgNPs and their ecotoxicity in environmentally realistic conditions such as soil and water media.

Surfactant assisted extraction of incidental nanoparticles from road runoff sediment and their characterization by single particle-ICP-MS

A surfactant assisted extraction (SAE) method was developed to extract incidental nanoparticles (INPs) in the <300 nm particle size fraction from road runoff sediments and applied to a road runoff sediment. The method was evaluated by spiking experiments of road runoff sediment with engineered nanoparticle (ENP) suspensions of gold (Au-ENPs) between 30 nm and 200 nm and platinum (Pt-ENPs) between 30 nm and 70 nm with content ranging from 40 to 800 ng/g. Suspensions were analyzed by single particle (sp-)ICP-MS. In the presence of a road runoff matrix, an increase in ENP sizes by a maximum of 8% for Au-ENPs and 9% for Pt-ENPs was observed. ENPs mass recovery was >50% for all Au-ENPs with content higher than 200 ng/g and for 30 and 50 nm Pt-ENPs at content of 160 ng/g while for lower content the recovery was 0%. For 70 nm Pt-ENPs, recovery was always >80% and increased with increasing Pt content up to 100% in the presence of road runoff matrix. Metal content of INPs in the road runoff sediment in the fraction <300 nm decreased from copper (Cu; μg/g)> zinc (Zn)> zirconium (Zr)> cerium (Ce)> lead (Pb)> cadmium (Cd) > platinum (Pt; μg/g). Over 90% of Pt-, Zn-, Cd-, Pb- and Ce-INPs are composed of particles with less than 20 fg, while Zr- and Cu-INPs are dominated by masses higher than 20 fg. The tested SAE may be applicable to determine environmental contents of INPs in sediments and possibly in soils.

Partitioning and stability of ionic, nano- and microsized zinc in natural soil suspensions

Batch experiments aimed at solid-liquid distribution of 40 nm engineered zinc oxide nanoparticles (ZnO-NP), microparticles (bulk ZnO), and ionic Zn in ZnSO₄ solution were conducted on eight field soil samples of different characteristics to identify how the form of Zn affects its distribution in soil. The concentration of Zn in different size fractions present in supernatant solutions obtained from centrifuged soil suspensions was also measured. The distribution between a liquid and a solid was different for the ionic Zn (ZnSO₄) and particulate Zn (ZnO-NP and bulk ZnO). In acidic soil solutions, the partitioning coefficient (K_dA) of the ionic Zn was in range of 14.7-15.9 compared to 133.4-194.1 for ZnO-NP and bulk ZnO. The situation was reversed under alkaline conditions resulting in a decreased retention of particulate forms of Zn by the solids, with ZnO-NP showing K_dA of 8.5-23.4 compared to 160.0-760.1 of ionic Zn. Soil pH thus appears to be the predominant factor influencing the solid-liquid distribution of Zn in different forms. Even the distribution of Zn in different size fractions is heavily affected by the soil pH, causing dissolution of ZnO-NP and bulk ZnO in acidic soils. In alkaline soils, applied ionic Zn (ZnSO₄) remained dissolved. This study shows that ZnO-NP are the most mobile of the three tested forms of Zn in alkaline soils. This may affect the spatial distribution of Zn in soil and potentially increase the effectivity of the application of Zn fertilizer when in nanoparticle form.

Dispersion of natural nanomaterials in surface waters for better characterization of their physicochemical properties by AF4-ICP-MS-TEM

Characterization and understanding of natural nanomaterials (NNMs) properties is essential to differentiate engineered nanomaterials (ENMs) from NNMs. However, NNMs in environmental samples typically occur as heteroaggregates with other particles, e.g., NNMs, ENMs, and larger particles. Therefore, there is a need to isolate NNMs into their primary particles to better characterize their physicochemical properties. Here, we evaluated the efficiency of sodium hydroxide, sodium oxalate, and sodium pyrophosphate to extract NNMs from surface waters. The extracted NNMs were characterized for total metal concentration by inductively coupled plasma-mass spectrometry (ICP-MS) following full digestion; size distribution, elemental composition and ratios by flow-field flow fractionation (AF4)-ICP-MS; and morphology by transmission electron microscopy (TEM). Sodium pyrophosphate extraction resulted in the highest NNM concentration and the smallest NNM size distribution. Sodium hydroxide and sodium oxalate extraction generated heteroaggregates with a broad size distribution. The NNM extraction efficiency increased with extractant (sodium oxalate and sodium pyrophosphate) concentration. The concentration of metals in the sodium pyrophosphate-extracted NNMs compared to the total metal concentration was element-dependent and varied from as high as >80% for Cu, Zn, and Sr to as low as <5% for Al, Ti, and Nb. This study provides a simple protocol for NNM extraction from complex environmental samples and provides a better understanding of NNM physicochemical properties. The presented NNM extraction protocol forms the basis for ENM extraction from natural waters.

Significant contribution of metastable particulate organic matter to natural formation of silver nanoparticles in soils

Particulate organic matter (POM) is distributed worldwide in high abundance. Although insoluble, it could serve as a redox mediator for microbial reductive dehalogenation and mineral transformation. Quantitative information on the role of POM in the natural occurrence of silver nanoparticles (AgNPs) is lacking, but is needed to re-evaluate the sources of AgNPs in soils, which are commonly considered to derive from anthropogenic inputs. Here we demonstrate that POM reduces silver ions to AgNPs under solar irradiation, by producing superoxide radicals from phenol-like groups. The contribution of POM to the naturally occurring AgNPs is estimated to be 11-31%. By providing fresh insight into the sources of AgNPs in soils, our study facilitates unbiased assessments of the fate and impacts of anthropogenic AgNPs. Moreover, the reducing role of POM is likely widespread within surface environments and is expected to significantly influence the biogeochemical cycling of Ag and other contaminants that are reactive towards phenol-like groups.

Ionic-liquid-based microextraction method for the determination of silver nanoparticles in consumer products

A simple method to determine hazardous silver nanoparticles (AgNPs) based on ionic liquid (IL) dispersive liquid-liquid microextraction and back-extraction is described. This approach involves AgNP stabilization using a cationic surfactant followed by extraction from the sample matrix by means of an IL as an extraction phase. Certain ILs have high affinity for metals, and preliminary experiments showed that those ILs consisting of imidazolium cation efficiently extracted AgNPs in the presence of a cationic surfactant and a chelating agent. Afterward, histamine was used as a dispersing agent to promote phase transfer of differently coated AgNPs from the IL in aqueous solution to be subsequently analyzed by UV-visible spectrometry. The analytical procedure allows AgNPs to be recovered from the sample matrix in an aqueous medium, the enrichment factor being up to 4, preserving both AgNP size and AgNP shape as demonstrated by transmission electron microscopy images and the localized surface plasmon resonance band characteristic of each AgNP. The present method exhibited a linear response for AgNPs in the range from 3 to 20 μg/mL, the limit of detection being 0.15 μg/mL. Method efficiency was assessed in spiked orange juice and face cream, yielding recoveries ranging from 75.7% to 96.6%. The method was evaluated in the presence of other nanointerferents (namely, gold nanoparticles). On the basis of diverse electrophoretic mobilities and surface plasmon resonance bands for metal nanoparticles, capillary electrophoresis was used to prove the lack of interaction of the target AgNPs with gold nanoparticles during the whole protocol; thus, interferents do not affect AgNP determination. As a consequence, the analytical approach described has great potential for the analysis of engineered nanosilver in consumer products. Graphical abstract Simple protocol for the determination of silver nanoparticles (AgNPs) based on dispersive liquid-liquid extraction with a specific short alkyl side chain ionic liquid and their quantitative detection with a UV-visible spectrometer. HMIM•PF₆ 1-hexyl-3-methylimidazolium hexafluorophosphate, NP nanoparticle, SPR surface plasmon resonance.