Oxygen Vacancy Enhanced Gas-Sensing Performance of CeO2/Graphene Heterostructure at Room Temperature

Ultrasensitive Detection of Dimethylamine Gas for Early Diagnosis of Parkinson's Disease Using CeO2-Coated Ti3C2Tx MXene/Carbon Nanofibers

Parkinson's disease is a prevalent neurological disorder, with dimethylamine (DMA) recognized as a crucial breath biomarker, particularly at the parts per billion (ppb) level. Detecting DMA gas at this level, especially at room temperature and high humidity, remains a formidable challenge. This study presents an ultrasensitive chemiresistor DMA gas sensor, leveraging the CeO2-coated Ti3C2Tx MXene/carbon nanofiber (CeO2/MXene/C NFs) heterostructure to enhance dimethylamine sensing. The high conductivity of MXene, combined with C-Ti-O bonds and a sp2 hybridized hexagonal carbon structure, increases surface active sites. The presence of Ce3+ promotes the formation of surface-active oxygen species, while the MXene-CeO2 heterojunction broadens the electron depletion layer. Theoretical calculations reveal that the highest adsorption energy for DMA gas is at the Ce top site, explaining the sensor's satisfactory sensitivity, rapid response and recovery process, low detection limit (5 ppb), and high selectivity at room temperature. The Ce3+/Ce4+ dynamic self-refresh mechanism, involving surface hydroxyl elimination, enhances the sensor's performance under high-humid conditions. Clinical breath tests demonstrate the sensor's ability to distinguish between healthy individuals and Parkinson's disease patients, paving the way for developing next-generation sensors for early diagnosis of neurological disorders.

A Prototype of Graphene E-Nose for Exhaled Breath Detection and Label-Free Diagnosis of Helicobacter Pylori Infection

Helicobacter pylori (HP), a common microanaerobic bacteria that lives in the human mouth and stomach, is reported to infect ≈50% of the global population. The current diagnostic methods for HP are either invasive, time-consuming, or harmful. Therefore, a noninvasive and label-free HP diagnostic method needs to be developed urgently. Herein, reduced graphene oxide (rGO) is composited with different metal-based materials to construct a graphene-based electronic nose (e-nose), which exhibits excellent sensitivity and cross-reactive response to several gases in exhaled breath (EB). Principal component analysis (PCA) shows that four typical types of gases in EB can be well discriminated. Additionally, the potential of the e-nose in label-free detection of HP infection is demonstrated through the measurement and analysis of EB samples. Furthermore, a prototype of an e-nose device is designed and constructed for automatic EB detection and HP diagnosis. The accuracy of the prototype machine integrated with the graphene-based e-nose can reach 92% and 91% in the training and validation sets, respectively. These results demonstrate that the highly sensitive graphene-based e-nose has great potential for the label-free diagnosis of HP and may become a novel tool for non-invasive disease screening and diagnosis.

Mesoporous and Encapsulated In2O3/Ti3C2Tx Schottky Heterojunctions for Rapid and ppb-Level NO2 Detection at Room Temperature

Rapid and ultrasensitive detection of toxic gases at room temperature is highly desired in health protection but presents grand challenges in the sensing materials reported so far. Here, we present a gas sensor based on novel zero dimensional (0D)/two dimensional (2D) indium oxide (In2O3)/titanium carbide (Ti3C2Tx) Schottky heterostructures with a high surface area and rich oxygen vacancies for parts per billion (ppb) level nitrogen dioxide (NO2) detection at room temperature. The In2O3/Ti3C2Tx gas sensor exhibits a fast response time (4 s), good response (193.45% to 250 ppb NO2), high selectivity, and excellent cycling stability. The rich surface oxygen vacancies play the role of active sites for the adsorption of NO2 molecules, and the Schottky junctions effectively adjust the charge-transfer behavior through the conduction tunnel in the sensing material. Furthermore, In2O3 nanoparticles almost fully cover the Ti3C2Tx nanosheets which can avoid the oxidation of Ti3C2Tx, thus contributing to the good cycling stability of the sensing materials. This work sheds light on the sensing mechanism of heterojunction nanostructures and provides an efficient pathway to construct high-performance gas sensors through the rational design of active sites.

Microwave-Solvothermal Synthesis of Mesoporous CeO2/CNCs Nanocomposite for Enhanced Room Temperature NO2 Detection

Nitrogen dioxide (NO2) gas sensors are pivotal in upholding environmental integrity and human health, necessitating heightened sensitivity and exceptional selectivity. Despite the prevalent use of metal oxide semiconductors (MOSs) for NO2 detection, extant solutions exhibit shortcomings in meeting practical application criteria, specifically in response, selectivity, and operational temperatures. Here, we successfully employed a facile microwave-solvothermal method to synthesize a mesoporous CeO2/CNCs nanocomposite. This methodology entails the rapid and comprehensive dispersion of CeO2 nanoparticles onto helical carbon nanocoils (CNCs), resulting in augmented electronic conductivity and an abundance of active sites within the composite. Consequently, the gas-sensing sensitivity of the nanocomposite at room temperature experienced a notable enhancement. Moreover, the presence of cerium oxide and the conversion of Ce3+ and Ce4+ ions facilitated the generation of oxygen vacancies in the composites, thereby further amplifying the sensing performance. Experimental outcomes demonstrate that the nanocomposite exhibited an approximate 9-fold increase in response to 50 ppm NO2 in comparison to pure CNCs at room temperature. Additionally, the CeO2/CNCs sensor displayed remarkable selectivity towards NO2 when exposed to gases such as NH3, CO, SO2, CO2, and C2H5OH. This straightforward microwave-solvothermal method presents an appealing strategy for the research and development of intelligent sensors based on CNCs nanomaterials.

Oxygen Vacancy-Rich Bimetallic Au@Pt Core-Shell Nanosphere-Functionalized Electrospun ZnFe2O4 Nanofibers for Chemiresistive Breath Acetone Detection

Sensitive and selective acetone detection is of great significance in the fields of environmental protection, industrial production, and individual health monitoring from exhaled breath. To achieve this goal, bimetallic Au@Pt core-shell nanospheres (BNSs) functionalized-electrospun ZnFe2O4 nanofibers (ZFO NFs) are prepared in this work. Compared to pure NFs-650 analogue, the ZFO NFs/BNSs-2 sensor exhibits a stronger mean response (3.32 vs 1.84), quicker response/recovery speeds (33 s/28 s vs 54 s/42 s), and lower operating temperature (188 vs 273 °C) toward 0.5 ppm acetone. Note that an experimental detection limit of 30 ppb is achieved, which ranks among the best cases reported thus far. Besides the demonstrated excellent repeatability, humidity-enhanced response, and long-term stability, the selectivity toward acetone is remarkably improved after BNSs functionalization. Through material characterizations and DFT calculations, all these improvements could be attributed to the boosted oxygen vacancies and abundant Schottky junctions between ZFO NFs and BNSs, and the synergistic catalytic effect of BNSs. This work offers an alternative strategy to realize selective subppm acetone under high-humidity conditions catering for the future requirements of noninvasive breath diabetes diagnosis in the field of individual healthcare.

Bandgap engineering approach for designing CuO/Mn3O4/CeO2 heterojunction as a novel photocatalyst for AOP-assisted degradation of Malachite green dye

A ternary nanohybrid CuO/Mn₃O₄/CeO₂ was developed in the present work using a co-precipitation-assisted hydrothermal method. The designed photocatalyst's structural, morphology, elemental composition, electronic states of elements, and optical properties were studied using corresponding analytical techniques. Results from PXRD, TEM/HRTEM, XPS, EDAX, and PL showed that the desired nanostructure had formed. Using Tauc's energy band gap plot, it was determined that the nanostructures band gap was ~ 2.44 eV, which showed the band margins of the various moieties, CeO₂, Mn₃O₄, and CuO, had modified. Thus, improved redox conditions led to a substantial decrease in the recombination rate of electron-hole pairs, which was further explained by a PL study in that charge separation plays a key role. Under exposure to visible light irradiation for 60 min, it was revealed that the photocatalyst achieved 98.98% of photodegradation efficiency for malachite green (MG) dye. The process of photodegradation proceeded according to a pseudo-first-order reaction kinetic model with an excellent rate of reaction of 0.07295 min^-1 with R² = 0.99144. The impacts of different reaction variables, inorganic salts, and water matrices were investigated. This research seeks to create a ternary nanohybrid photocatalyst with high photostability, visible spectrum activity, and reusability up to four cycles.

Generation of Oxygen Vacancies in Metal-Organic Framework-Derived One-Dimensional Ni0.4Fe2.6O4 Nanorice Heterojunctions for ppb-Level Diethylamine Gas Sensing

Metal-organic frameworks (MOFs) are ideal sensing materials due to their distinctive morphologies, high surface area, and simple calcination to remove sacrificial MOF scaffolds. Oxygen vacancies (O_vs) can be efficiently generated by the thermal annealing of metal oxides in an inert atmosphere. Herein, MIL-53-based Fe and Fe/Ni-MOFs nanorices (NRs) were first prepared by using a solvothermal method, and then one-dimensional (1D) Fe₂O₃ and Ni_0.4Fe_2.6O₄ NRs were derived from the MOFs after calcination at 350 °C in an air and argon (Ar) atmosphere, respectively. It was found that Ar-annealed Ni_0.4Fe_2.6O₄ NRs have higher O_vs concentrations (82.11%) and smaller NRs (24.3 nm) than air-annealed NRs (65.68% & 31.5 nm). Beneficially, among the synthesized NRs, the Ar-Ni_0.4Fe_2.6O₄ NRs show a higher sensitivity to diethylamine (DEA) (R_a/R_g = 23 @ 5 ppm, 175 °C), low detection limit (R_a/R_g = 1.2 @ 200 ppb), wide dynamic response (R_a/R_g = 93.5@ 30 ppm), high stability (30 days), and faster response/recovery time (4 s/38 s). Moreover, the 1D nanostructure containing heterostructures offers excellent sensing selectivity and a wide detection range from 200 ppb to 30 ppm in the presence of DEA. The outstanding gas sensing behavior can be attributable to synergistic impact, structural advantages, high concentration of O_vs, and the heterojunction interface, which can have profound effects on gas sensor performance. This study provides a unique technique for constructing high-performance gas sensors for ppb-level DEA detection and the formation of O_vs in metal oxides without the need for any additives.

Oxygen Plasma-Assisted Defect Engineering of Graphene Nanocomposites with Ultrasmall Co3O4 Nanocrystals for Monitoring Toxic Nitrogen Dioxide at Room Temperature

Functional adjustment of graphene with metal oxide can in fact progress the affectability of graphene-based gas sensors. However, it could be a huge challenge to upgrade the detecting execution of nitrogen dioxide (NO₂) sensors at room temperature. The ultrasmall size of nanocrystals (NCs) and copious defects are two key variables for moving forward gas detecting execution. Herein, we provide an effective strategy that the hydrothermal reaction is combined with room-temperature oxygen plasma treatment to prepare Co₃O₄ NCs and reduced graphene oxide (RGO) nanohybrids (Co₃O₄-RGO). Among all of Co₃O₄-RGO nanohybrids, Co₃O₄-RGO-60 W exhibits the most superior NO₂ sensing properties and achieves the low-concentration detection of NO₂. The sensitivity of Co₃O₄-RGO-60 W to 20 ppm NO₂ at room temperature is the highest (72.36%). The excellent sensing properties can mainly depend on the change in the microstructure of Co₃O₄-RGO. Compared with Co₃O₄-RGO, Co₃O₄-RGO-60 W with oxygen plasma treatment shows more favorable properties for NO₂ adsorption, including the smaller size of Co₃O₄ NCs, larger specific surface area, pore size, and more oxygen vacancies (OVs). Especially, OVs make the surface of NCs have a unique chemical state, which can increase active sites and improve the adsorption property of NO₂. Besides, the agreeable impact of the p-p heterojunction (Co₃O₄ and RGO) and the doping of N molecule contribute to the improved NO₂ detecting properties. It is demonstrated that the Co₃O₄-RGO-60 W sensor is expected to monitor NO₂ at room temperature sensitively.

Redox-mediated C-C bond scission in alcohols adsorbed on CeO2-xthin films

The decomposition mechanisms of ethanol and ethylene glycol on well-ordered stoichiometric CeO₂(111) and partially reduced CeO_2-x(111) films were investigated by means of synchrotron radiation photoelectron spectroscopy, resonant photoemission spectroscopy, and temperature programmed desorption. Both alcohols partially deprotonate upon adsorption at 150 K and subsequent annealing yielding stable ethoxy and ethylenedioxy species. The C-C bond scission in both ethoxy and ethylenedioxy species on stoichiometric CeO₂(111) involves formation of acetaldehyde-like intermediates and yields CO and CO₂accompanied by desorption of acetaldehyde, H₂O, and H₂. This decomposition pathway leads to the formation of oxygen vacancies. In the presence of oxygen vacancies, C-O bond scission in ethoxy species yields C₂H₄. In contrast, C-C bond scission in ethylenedioxy species on the partially reduced CeO_2-x(111) is favored with respect to C-O bond scission and yields methanol, formaldehyde, and CO accompanied by the desorption of H₂O and H₂. Still, scission of C-O bonds on both sides of the ethylenedioxy species yields minor amounts of accompanying C₂H₄and C₂H₂. C-O bond scission is coupled with a partial recovery of the lattice oxygen in competition with its removal in the form of water.

Constructing oxygen vacancy-enriched Fe2O3@NiO heterojunctions for highly efficient electrocatalytic alkaline water splitting

The oxygen vacancy-enriched Fe2O3@NiO heterojunctions assembled by nanoparticles and nanosheets can be used as a highly efficient and stable dual-function electrocatalyst to achieve efficient all-water splitting.

T, Dhileepan MD, Neppolian B, K. LN. Surface defect-engineered CeO2−x by ultrasound treatment for superior photocatalytic H2 production and water treatment

We designed a CeO2−x photocatalyst under the influence of low-frequency ultrasonic waves to generate surface oxygen vacancies for efficient photocatalytic performance.

Gas sensing materials roadmap

Gas sensor technology is widely utilized in various areas ranging from home security, environment and air pollution, to industrial production. It also hold great promise in non-invasive exhaled breath detection and an essential device in future internet of things. The past decade has witnessed giant advance in both fundamental research and industrial development of gas sensors, yet current efforts are being explored to achieve better selectivity, higher sensitivity and lower power consumption. The sensing layer in gas sensors have attracted dominant attention in the past research. In addition to the conventional metal oxide semiconductors, emerging nanocomposites and graphene-like two-dimensional materials also have drawn considerable research interest. This inspires us to organize this comprehensive 2020 gas sensing materials roadmap to discuss the current status, state-of-the-art progress, and present and future challenges in various materials that is potentially useful for gas sensors.

Ordered mesoporous metal oxides for electrochemical applications: correlation between structure, electrical properties and device performance

Ordered mesoporous metal oxides with a high specific surface area, tailored porosity and engineered interfaces are promising materials for electrochemical applications. In particular, the method of evaporation-induced self-assembly allows the formation of nanocrystalline films of controlled thickness on polar substrates. In general, mesoporous materials have the advantage of benefiting from a unique combination of structural, chemical and physical properties. This Perspective article addresses the structural characteristics and the electrical (charge-transport) properties of mesoporous metal oxides and how these affect their application in energy storage, catalysis and gas sensing.

Oxygen Vacancy-Enhanced Electrochemiluminescence Sensing Strategy Using Luminol Thermally Encapsulated in Apoferritin as a Transducer for Biomarker Immunoassay

Oxygen vacancies (OVs) enhanced electrochemiluminescence (ECL) biosensing strategy using luminol thermally encapsulated in apoferritin (Lum@apoFt) as an efficient transducer was investigated for ultrasensitive biomarker detection. By applying the oxygen-defect engineering (ODE) strategy, the OVs enriched cobalt-iron oxide (r-CoFe₂O₄) was fabricated as the sensing substrate to boost the electron mobility and catalyze the generation of superoxide anion radical (O₂^•-) for signal amplification. It should be noted that r-CoFe₂O₄ with higher OVs density dramatically accelerated the ECL reaction between O₂^•- and luminol anionic radicals, achieving 6.5-fold stronger ECL output than CoFe₂O₄ with no or low OVs density. Moreover, facile encapsulation of approximate 412 luminol molecules in a single apoFt cavity was first realized by an efficient thermal-induction method. The obtained Lum@apoFt complexes exhibited well-maintained ECL efficiency and excellent biocompatibility for biological modifications. On this basis, a biosensor was developed for early diagnostics of squamous cell carcinomas by detecting its representative biomarker named cytokeratin 19 fragment 21-1 (CYFRA 21-1), from which excellent linearity was achieved in 0.5 pg/mL to 50 ng/mL with a detection limit of 0.14 pg/mL. This work not only put forward a novel idea of creating OVs enriched sensing interface with excellent signal-amplification function but also proposes a facile and robust methodology to design apoFt-based transducers for developing more practical nanoscale biosensors in early diagnostics of diseases.

Gas-Sensing Activity of Amorphous Copper Oxide Porous Nanosheets

In this paper, the gas-sensing properties of copper oxide porous nanosheets in amorphous and highly crystalline states were comparatively investigated on the premise of almost the same specific surface area, morphology and size. Unexpectedly, the results show that amorphous copper oxide porous nanosheets have much better gas sensing properties than highly crystalline copper oxide to a serious of volatile organic compounds, and the lowest detection limit (LOD) of the amorphous copper oxide porous nanosheets to methanal is even up to 10 ppb. By contrast, the LOD of the highly crystalline copper oxide porous nanosheets to methanal is 95 ppb. Experiments prove that the oxygen vacancies contained in the amorphous copper oxide porous nanosheets play a key role in improving gas sensitivity, which greatly improve the chemical activity of the materials, especially for the adsorption of molecules containing oxygen-groups such as methanal and oxygen.

DNA-scaffold copper nanoclusters integrated into a cerium(III)-triggered Fenton-like reaction for the fluorometric and colorimetric enzymatic determination of glucose

A fluorometric and colorimetric method are described for the determination of hydrogen peroxide and glucose by integrating copper nanoclusters (CuNCs) into a Fenton-like reaction. The mechanism mainly depends on the fast formation of long-strand DNA-templated CuNCs with strong red fluorescence (with excitation/emission maxima at 340/640 nm) in the absence of H₂O₂. The DNA can be cleaved into short-oligonucleotide fragments by hydroxy radicals as formed in the Ce(III)-triggered Fenton-like reaction in the presence of H₂O₂. As a result, short-strand DNA loses the ability as a template for the formation of CuNCs. This leads to a decrease of fluorescence. The colorimetric assay, in turn, is based on the oxidation of colorless Ce(III) ions to the distinctly yellow Ce(IV) ions (with an absorption maximum at 400 nm) by H₂O₂. Compared with those assays based on the use of enzyme mimics, this method does not require any chromogenic substrates such as ABTS and TMB. Based on the dual-signal readout platform, we successfully achieved the detection of H₂O₂ and glucose. LODs are as low as 0.266 μM and 2.92 μM. The methods were applied to the sensitive determination of glucose by using glucose oxidase (GOx) which catalyzes the oxidization of glucose to produce H₂O₂. The practical application was demonstrated by determination of glucose in human serum, with apparent recoveries of 98.4-101.9% and 99.1-105.6%, respectively. The concentration of glucose ranges from 1 to 500 μM and 50 to 600 μM based on the dual-signal readout platform, respectively. This fluorometric and colorimetric dual-mode strategy will pave a new avenue for constructing effective assays for H₂O₂-related analytes in biochemical and clinical applications. Graphical abstractSchematic representation of a fluorometric and colorimetric dual-readout strategy for the sensitive determination of hydrogen peroxide and glucose. The assay has been designed by integrating copper nanoclusters into a Ce(III)-triggered Fenton-like reaction.

Fe-Doped ZnO/Reduced Graphene Oxide Nanocomposite with Synergic Enhanced Gas Sensing Performance for the Effective Detection of Formaldehyde

Here, we report the synthesis of Fe-doped ZnO/reduced graphene oxide (rGO) nanocomposites for gas sensing applications via a one-pot hydrothermal process. A wide range of characterization techniques were used to confirm the successful fabrication of the nanocomposite material and to determine the surface area, the structural and morphological properties, the chemical composition, and the purity of the samples, such as Brunauer-Emmett-Teller, X-ray diffraction, Fourier transform infrared, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, UV-vis spectroscopy, and X-ray photoelectron spectroscopy techniques. The gas sensing performance to formaldehyde was studied thoroughly in a temperature-controlled test chamber. Compared to that of the bare ZnO and ZnO/rGO nanocomposites, the as-prepared 5 atom % Fe-doped ZnO/rGO nanocomposites presented significantly enhanced gas sensing performance to formaldehyde at relatively low temperatures. Whereas most formaldehyde sensors operate at 150 °C and can detect as low as 100 ppm concentrations, the presented sensor can detect 5 ppm formaldehyde at 120 °C. Its fast response-recovery time, high stability, and high selectivity make it an ideal sensor; however, it can exhibit degenerative gas sensing performance at elevated relative humidity. The enhanced gas sensing mechanism was explained as the synergic effect of rGO and Fe doping. The results demonstrate that Fe doping and decorating the nanocomposite with rGO are promising approaches for achieving a superior gas sensing performance for the development of ZnO gas sensors for the detection of formaldehyde.

Direct Operando Spectroscopic Observation of Oxygen Vacancies in Working Ceria-Based Gas Sensors

Metal-oxide semiconductors are of great interest for gas-sensing applications. We provide new insights into the mode of operation of ceria-based gas sensors during ethanol gas sensing using combined operando Raman-gas-phase FTIR spectroscopy. Visible Raman spectroscopy is employed to monitor the presence of oxygen vacancies in ceria via F_2g mode softening, while simultaneously recorded FTIR spectra capture the gas-phase composition. Such an experimental approach allowing the direct observation of oxygen vacancies in metal-oxide gas sensors has not been reported in the literature. By systematically varying the gas atmosphere and temperature, we can relate the sensor response to the spectroscopic signals, enabling us to obtain new fundamental insight into the functioning of metal-oxide semiconductor gas sensors, as well as their differences from heterogeneous catalysts.

Investigation of Microstructure Effect on NO2 Sensors Based on SnO2 Nanoparticles/Reduced Graphene Oxide Hybrids

The microstructures of metal oxide-modified reduced graphene oxide (RGO) are expected to significantly affect room-temperature (RT) gas sensing properties, where the microstructures are dependent on the synthesis methods. Herein, we demonstrate the effect of microstructures on RT NO₂ sensing properties by taking typical SnO₂ nanoparticles (NPs) embellished RGO (SnO₂ NPs-RGO) hybrids as examples. The samples were synthesized by growing SnO₂ NPs on RGO through hydrothermal reduction (SnO₂ NPs-RGO-PR), which display the advantages such as high reactivity of the SnO₂ surface with NO₂, more oxygen vacancies (O_V) and chemisorbed oxygen (O_C), close contact between SnO₂ NPs and RGO, and large surface area, compared to the samples prepared by one-pot hydrothermal synthesis from Sn⁴⁺ and GO (SnO₂ NPs-RGO-IS), and the assembly of SnO₂ NPs on RGO (SnO₂ NPs-RGO-SA). As expected, the SnO₂ NPs-RGO-PR-based sensor presents high sensitivity towards 5 ppm NO₂ (65.5%), but 35.0% for the SnO₂ NPs-RGO-IS-based sensor and 32.8% for the SnO₂ NPs-RGO-SA-based sensor at RT. Meanwhile, the corresponding response time and recovery time calculated by achieving 90% of the current change of the SnO₂ NPs-RGO-PR-based sensor for exposure to NO₂ is 12 s and to air is 17 s, respectively, whereas 74/42 s for the SnO₂ NPs-RGO-IS-based sensor and 77/90 s for the SnO₂ NPs-RGO-SA-based sensor. The results can prove the tailoring sensing behavior of the gas sensor according to different structures of materials.

Synthesis, design and sensing applications of nanostructured ceria-based materials

Cerium-based materials possess redox properties due to the presence of dual valence states of Ce³⁺ and Ce⁴⁺.