2D Graphene Oxide/Fe-MOF Nanozyme Nest with Superior Peroxidase-Like Activity and Its Application for Detection of Woodsmoke Exposure Biomarker

Spindle shaped Fe-Ni metal organic frameworks wrapped with f-MWCNTs for the efficacious sensing of tartrazine

A facile hydrothermal route was employed for the synthesis of iron-nickel bimetal organic frameworks (Fe-Ni bi-MOFs) and composite with an acid functionalized multi-walled carbon nanotubes (Fe-Ni MOF/f-MWCNTs) for electrochemical detection of tartrazine. The as-prepared Fe-Ni MOF/f-MWCNTs was confirmed by the several physicochemical studies. A micro spindle shaped, highly porous, and crystalline Fe-Ni MOF/f-MWCNTs was noticed. The high sensitivity and stability of Fe-Ni MOF/f-MWCNTs/GCE modified electrode was analyzed. Due to its high porosity nature, the analyte molecule effectively gets adsorbed on the modified electrode and undergo electrochemical oxidation effectively. The modified electrode exhibits low limit of detection (LOD) and limit of quantification (LOQ) as 0.04 × 10-6 mol/L and 0.13 × 10-6 mol/L towards tartrazine. These results reveal the potential applications of Fe-Ni MOF/f-MWCNTs/GCE as modified electrode material for sensitive detection of tartrazine along with its robust reproducibility, stability, and effective sensing properties.

Nanozyme-assisted molecularly imprinted polymer-based indirect competitive ELISA for the detection of marine biotoxin

Saxitoxin (STX), which is produced by certain dinoflagellate species, is a type of paralytic shellfish poisoning toxin that poses a serious threat to human health and the environment. Therefore, developing a technology for the convenient and cost-effective detection of STX is imperative. In this study, we developed an affinity peptide-imprinted polymer-based indirect competitive ELISA (ic-ELISA) without using enzyme-toxin conjugates. AuNP/Co3O4@Mg/Al cLDH was synthesized by calcining AuNP/ZIF-67@Mg/Al LDH, which was obtained by combining AuNPs, ZIF-67, and flower-like Mg/Al LDH. This synthesized nanozyme exhibited high catalytic activity (Km = 0.24 mM for TMB and 132.5 mM for H2O2). The affinity peptide-imprinted polymer (MIP) was imprinted with an STX-specific template peptide (STX MIP) on a multi-well microplate and then reacted with an STX-specific signal peptide (STX SP). The interaction between the STX SP and MIP was detected using a streptavidin-coated nanozyme (SA-AuNP/Co3O4@Mg/Al cLDH). The developed MIP-based ic-ELISA exhibited excellent selectivity and sensitivity, with a limit of detection of 3.17 ng/mL (equivalent: 0.317 μg/g). Furthermore, the system was validated using a commercial ELISA kit and mussel tissue samples, and it demonstrated a high STX recovery with a low coefficient of variation. These results imply that the developed ic-ELISA can be used to detect STX in real samples.

Ultrahigh peroxidase-like catalytic performance of Cu-N4 and Cu-N4S active sites-containing reduced graphene oxide for sensitive electrochemical biosensing

Carbon-based nanozymes possessing peroxidase-like activity have attracted significant interest because of their potential to replace native peroxidases in biotechnology. Although various carbon-based nanozymes have been developed, their relatively low catalytic efficiency needs to be overcome to realize their practical utilization. Here, inspired by the elemental uniqueness of Cu and the doped elements N and S, as well as the active site structure of Cu-centered oxidoreductases, we developed a new carbon-based peroxidase-mimicking nanozyme, single-atom Cu-centered N- and S-codoped reduced graphene oxide (Cu-NS-rGO), which preserved many Cu-N4 and Cu-N4S active sites and showed dramatically high peroxidase-like activity without any oxidase-like activity, yielding up to 2500-fold higher catalytic efficiency (kcat/Km) than that of pristine rGO. The high catalytic activity of Cu-NS-rGO might be attributed to the acceleration of electron transfer from Cu single atom as well as synergistic effects from both Cu-N4 and Cu-N4S active sites, which was theoretically confirmed by Gibbs free energy calculations using density functional theory. The prepared Cu-NS-rGO was then used to construct an electrochemical bioassay system for detecting choline and acetylcholine by coupling with the corresponding oxidases. Using this system, both target molecules were selectively determined with high sensitivity that was sufficient to clinically determine their levels in physiological fluids. Overall, this study will facilitate the development of nanocarbon-based nanozymes and their electrochemical biosensing applications, which can be extended to the development of miniaturized devices in point-of-care testing environments.

Accelerating the Phosphatase-like Activity of Uio-66-NH2 by Catalytically Inactive Metal Ions and Its Application for Improved Fluorescence Detection of Cardiac Troponin I

Compared with natural enzymes, nanozymes usually exhibit much lower catalytic activities, which limit the sensitivities of nanozyme-based immunoassays. Herein, several metal ions without enzyme-like activities were engineered onto Uio-66-NH2 nanozyme through postsynthetic modification. The obtained Mn+@Uio-66-NH2 (Mn+ = Zn2+, Cd2+, Co2+, Ca2+and Ni2+) exhibited improved phosphatase-like catalytic activities. In particular, a 12-fold increase in the catalytic efficiency (kcat/Km) of Uio-66-NH2 was observed after the modification with Zn2+. Mechanism investigations indicate that both the amino groups and oxygen-containing functional groups in Uio-66-NH2 are the binding sites of Zn2+, and the modified Zn2+ ions on Uio-66-NH2 serve as the additional catalytic sites for improving the catalytic performance. Furthermore, the highly active Zn2+@Uio-66-NH2 was used as a nanozyme label to develop a fluorescence immunoassay method for the detection of cardiac troponin I (cTnI). Compared with pristine Uio-66-NH2, Zn2+@Uio-66-NH2 can widen the linear range by 1 order of magnitude (from 10 pg/mL-1 μg/mL to 1 pg/mL-1 μg/mL) and also lower the detection limit by 5 times (from 4.7 pg/mL to 0.9 pg/mL).

Recent Progress and Prospect of Metal-Organic Framework-Based Nanozymes in Biomedical Application

A nanozyme is a nanoscale material having enzyme-like properties. It exhibits several superior properties, including low preparation cost, robust catalytic activity, and long-term storage at ambient temperatures. Moreover, high stability enables repetitive use in multiple catalytic reactions. Hence, it is considered a potential replacement for natural enzymes. Enormous research interest in nanozymes in the past two decades has made it imperative to look for better enzyme-mimicking materials for biomedical applications. Given this, research on metal-organic frameworks (MOFs) as a potential nanozyme material has gained momentum. MOFs are advanced hybrid materials made of inorganic metal ions and organic ligands. Their distinct composition, adaptable pore size, structural diversity, and ease in the tunability of physicochemical properties enable MOFs to mimic enzyme-like activities and act as promising nanozyme candidates. This review aims to discuss recent advances in the development of MOF-based nanozymes (MOF-NZs) and highlight their applications in the field of biomedicine. Firstly, different enzyme-mimetic activities exhibited by MOFs are discussed, and insights are given into various strategies to achieve them. Modification and functionalization strategies are deliberated to obtain MOF-NZs with enhanced catalytic activity. Subsequently, applications of MOF-NZs in the biosensing and therapeutics domain are discussed. Finally, the review is concluded by giving insights into the challenges encountered with MOF-NZs and possible directions to overcome them in the future. With this review, we aim to encourage consolidated efforts across enzyme engineering, nanotechnology, materials science, and biomedicine disciplines to inspire exciting innovations in this emerging yet promising field.

A facile, low-cost bimetallic iron-nickel MOF nanozyme-propelled ratiometric fluorescent sensor for highly sensitive and selective uric acid detection and its smartphone application

As a kind of well-known disease biomarker, uric acid (UA) is closely associated with normal metabolism and health. Despite versatile nanozymes facilitating the analysis of UA, most previous works could only generate single-signal outputs with unsatisfactory detection performance. Exploring a novel ratiometric fluorescent UA sensor with high sensitivity, reliability and portable sensing ability based on facile, low-cost nanozymes is still challenging. Herein, we report the first metal-organic-framework (MOF) nanozyme-originated ratiometric fluorescent UA sensor based on Fe3Ni-MOF-NH2 propelled UA/uricase/o-phenylenediamine tandem catalytic reaction. Different from previous reports, the peroxidase-like property and fluorescence of Fe3Ni-MOF-NH2 were simultaneously employed. In the absence of UA, only the MOF's fluorescence at 430 nm (FI430) can be observed, while the addition of UA will initiate UA/uricase catalytic reaction, and the generated H2O2 could oxidize o-phenylenediamine into highly fluorescent 2,3-diaminophenazine (DAP) (emission at 565 nm, FI565) under the catalysis of the MOF nanozyme. Coincidently, MOF's fluorescence can be quenched by DAP via the inner filter effect, resulting in a low FI430 value and high FI565 value, respectively. Therefore, H2O2 and UA can be alternatively detected through monitoring the above contrary fluorescence changes. The limit of detection for UA is 24 nM, which is much lower than those in most previous works, and the lowest among nanozyme-based ratiometric fluorescent UA sensors reported to date. Moreover, the portable sensing of UA via smartphone-based RGB analysis was facilely achieved by virtue of the above nanozyme-propelled tandem catalytic system, and MOF nanozyme-based molecular contrary logic pairs were further implemented accordingly.

Atomic-level design of metalloenzyme-like active pockets in metal-organic frameworks for bioinspired catalysis

Natural metalloenzymes with astonishing reaction activity and specificity underpin essential life transformations. Nevertheless, enzymes only operate under mild conditions to keep sophisticated structures active, limiting their potential applications. Artificial metalloenzymes that recapitulate the catalytic activity of enzymes can not only circumvent the enzymatic fragility but also bring versatile functions into practice. Among them, metal-organic frameworks (MOFs) featuring diverse and site-isolated metal sites and supramolecular structures have emerged as promising candidates for metalloenzymes to move toward unparalleled properties and behaviour of enzymes. In this review, we systematically summarize the significant advances in MOF-based metalloenzyme mimics with a special emphasis on active pocket engineering at the atomic level, including primary catalytic sites and secondary coordination spheres. Then, the deep understanding of catalytic mechanisms and their advanced applications are discussed. Finally, a perspective on this emerging frontier research is provided to advance bioinspired catalysis.

Artificial enzyme innovations in electrochemical devices: advancing wearable and portable sensing technologies

With the rapid evolution of sensing technologies, the integration of nanoscale catalysts, particularly those mimicking enzymatic functions, into electrochemical devices has surfaced as a pivotal advancement. These catalysts, dubbed artificial enzymes, embody a blend of heightened sensitivity, selectivity, and durability, laying the groundwork for innovative applications in real-time health monitoring and environmental detection. This minireview penetrates into the fundamental principles of electrochemical sensing, elucidating the unique attributes that establish artificial enzymes as foundational elements in this field. We spotlight a range of innovations where these catalysts have been proficiently incorporated into wearable and portable platforms. Navigating the pathway of amalgamating these nanoscale wonders into consumer-appealing devices presents a multitude of challenges; nevertheless, the progress made thus far signals a promising trajectory. As the intersection of materials science, biochemistry, and electronics progressively intensifies, a flourishing future seems imminent for artificial enzyme-infused electrochemical devices, with the potential to redefine the landscapes of wearable health diagnostics and portable sensing solutions.

Decoupling of the Confused Complex in Oxidation of 3,3',5,5'-Tetramethylbenzidine for the Reliable Chromogenic Bioassay

Regulation of the reaction pathways is a perennial theme in the field of chemistry. As a typical chromogenic substrate, 3,3',5,5'-tetramethylbenzidine (TMB) generally undertakes one-electron oxidation, but the product (TMBox1) is essentially a confused complex and is unstable, which significantly hampers the clinic chromogenic bioassays for more than 50 years. Herein, we report that sodium dodecyl sulfate (SDS)-based micelles could drive the direct two-electron oxidation of TMB to the final stable TMBox2. Rather than activation of H2O2 oxidant in the one-electron TMB oxidation by common natural peroxidase, activation of the TMB substrate by SDS micelles decoupled the thermodynamically favorable complex between TMBox2 with unreacted TMB, leading to an unusual direct two-electron oxidation pathway. Mechanism studies demonstrated that the complementary spatial and electrostatic isolation effects, caused by the confined hydrophobic cavities and negatively charged outer surfaces of SDS micelles, were crucial. Further cascading with glucose oxidase, as a proof-of-concept application, allowed glucose to be more reliably measured, even in a broader range of concentrations without any conventional strong acid termination.

Dopamine as a polymerizable reagent for enzyme-linked immunosorbent assay using horseradish peroxidase

We demonstrate that dopamine can be used as a reagent for colorimetric enzyme-linked immunosorbent assay (ELISA) using horseradish peroxidase (HRP). Dopamine was able to be polymerized in the presence of HRP and H2O2, and black polydopamine was obtained after the enzymatic reaction. Because of the black color, the absorbance was significantly changed in the whole range of the visible light region. Here, an indirect competitive ELISA based on the polymerization of dopamine was performed to detect a fluoroquinolone antibiotic, enrofloxacin. The antibiotic is commonly used in livestock farming. The anti-antibiotics antibody was produced from egg yolk from chicken hens. In the visible range, sufficient absorbance changes of ∼0.4∼0.5 and a low background level for the ELISA response were obtained, and the 50 % inhibitory concentration value at 450 nm was determined to be 26 ppb. The performance of the indirect competitive ELISA based on the polymerization of dopamine was compared to that based on the oxidation of catechol because dopamine has a catechol skeleton. By the complex of HRP and H2O2, catechol can be oxidized to o-benzoquinone having a maximum absorption wavelength of 420 nm. It was shown that the absorbance change in the case of polydopamine was about 2.5 times higher than that of catechol, where the background levels were similar. This confirms that the polymerization of dopamine significantly enhanced the photosignal.

Sulfur dots and iron co-doped nickel-based metal-organic frameworks with high nanozyme activity for the colorimetric determination of α-glucosidase activity

Alpha-glucosidase (α-Glu) plays a crucial role in regulating the normal physiological function of the body; therefore, α-Glu activity detection is crucial in clinical studies. In this study, a nickel-based metal-organic framework (Ni-MOF) co-doped with sulfur dots (SDs) and iron (Fe) was designed and constructed for the colorimetric detection of α-Glu. The SDs/Fe/Ni-MOF shows a very low Michaelis-Menten constant (0.0466 mM) for H2O2, suggesting a very high affinity for H2O2. Additionally, the free radicals generated by the nanozyme-catalyzed reaction were analyzed, and the feasibility of the nanozyme-catalyzed process was further verified using density functional theory. The bimetallic (Fe and Ni) can improve the catalytic activity of the material, and sulfur can improve the affinity with the substrate to further enhance the catalytic performance. Notably, hydroquinone (HQ) inhibits nanozyme activity, whereas α-Glu hydrolyzes alpha-arbutin (α-Arb) and subsequently produces HQ. Therefore, this study developed a method for detecting α-Glu activity using α-Arb as a substrate. This method has high selectivity, a wide detection range (1.00-100 U L-1), and a low detection limit (0.525 U L-1). Finally, the method was used to α-Glu activity detected in serum samples with good accuracy. This study provides a new method for the detection of α-Glu.

Enhancing catalytic performance of Fe and Mo co-doped dual single-atom catalysts with dual-enzyme activities for sensitive detection of hydrogen peroxide and uric acid

Single-atom catalysts (SACs) have attracted much attention due to their excellent catalytic activity, but the improvement of atomic loading which means that weight fraction (wt%) of metal atom was still facing great challenges. In this work, iron and molybdenum co-doped dual single-atom catalysts (Fe/Mo DSACs) was prepared for the first time by using the soft template sacrifice strategy, which improved significantly the atomic load and exhibited both the oxidase-like (OXD) activity and the dominant peroxidase-like (POD) activity. Further experiments reveal that Fe/Mo DSACs can not only catalyze O₂ to generate O₂^•- and ¹O₂, but also catalyze H₂O₂ to generate a large number of •OH, which caused 3, 3', 5, 5'-tetramethylbenzidine (TMB) to be oxidized to oxTMB, accompanied by the color changing from colorless to blue. The steady-state kinetic test showed that Michaelis-Menten constant (K_m) values and the maximum initial velocity values (V_max) of the POD activity of Fe/Mo DSACs were 0.0018 mM and 12.6 × 10^-8 M s^-1, respectively. The corresponding catalytic efficiency was tens of times higher than Fe SACs and Mo SACs, which proves that the synergistic effect between Fe and Mo has significantly improved the catalytic ability. Based on the excellent POD activity of Fe/Mo DSACs, a colorimetric sensing platform combined with TMB was proposed to realize the sensitive detection of H₂O₂ and uric acid (UA) in a wide range, with limits of detection as low as 0.13 and 0.18 μM, respectively. Finally, accurate and reliable results were obtained in the detection of H₂O₂ in cells, and of UA in human serum and urine.

High Peroxidase-Mimicking Metal-Organic Frameworks Decorated with Platinum Nanozymes for the Colorimetric Detection of Acetylcholine Chloride and Organophosphorus Pesticides via Enzyme Cascade Reaction

The sensitive detection of acetylcholinesterase (AChE) and organophosphorus pesticides (OPs) is very important for the protection of human health. Herein, a hybrid material, Pt NPs/Fe-MOF, consisting of a metal-organic framework (MIL-88B-NH2, Fe-MOF) decorated with platinum nanoparticles (Pt NPs), was prepared first and exhibited remarkably improved and excellent peroxidase-mimicking activity compared to the Fe-MOF material resulting from the synergistic catalysis effect between Fe-MOF and Pt NPs, which can effectively catalyze 3,3',5,5'-tetramethylbenzidine (TMB) oxidation to generate a blue product (oxidized TMB, oxTMB). Interestingly, in the presence of AChE and acetylcholinesterase, the peroxidase-mimicking activity from Pt NPs/Fe-MOF was inhibited obviously, and thus, a colorimetric sensing platform for AChE can be constructed; more importantly, after the addition of OPs, this nanozyme activity can be recovered, inducing the further successful construction of a sensitive colorimetric sensing platform for OPs. The related sensing mechanism and condition optimization were studied, and the as-prepared Pt NPs/Fe-MOF nanozyme-based colorimetric method for AChE and OP detection displayed superior analytical performances with wide linearities and low detection limits. Furthermore, the designed method offers satisfactory real application ability. We expect the as-proposed Pt NPs/Fe-MOF nanozyme-based colorimetric sensing platform for AChE and OPs via the enzyme cascade reaction to show great potential application.

Pd@Pt nanoparticle-linked immunosorbent assay for quantification of Collagen type II

The evaluation of specific protein content in engineered tissues provides a gateway for developing regenerative medicine treatments. Since collagen type II, the major component of articular cartilage, is critical for the blossoming field of articular cartilage tissue engineering, the interest in this protein is growing rapidly. Accordingly, the need for quantification of collagen type II is increasing as well. In this study, we provide recent results for a new quantifying nanoparticle sandwich immunoassay technique for collagen type II. Since mesoporous palladium@platinum (Pd@Pt) nanoparticles have peroxidase-like catalytic activities, these nanoparticles were utilized in an enzyme-linked immunosorbent assay (ELISA)-like format to circumvent the need for traditional enzymes. These nanoparticles were easily conjugated with anti-collagen type II antibodies by the natural affinity interaction and used to develop a direct sandwich ELISA-like format for nanoparticle-linked immunosorbent assays. Using this method, we obtained a limit of detection of 1 ng mL-1, a limit of quantification of 9 ng mL-1. and a broad linear range between 1 ng mL-1 and 50 μg mL-1 for collagen type II with an average relative standard deviation of 5.5%, useable over a pH range of 7 - 9 at least. The assay was successfully applied to quantify collagen type II in cartilage tissues and compared with the results of commercial ELISAs and gene expression by reverse transcription-quantitative polymerase chain reaction. This method provides a thermally stable and cost-efficient alternative to traditional ELISAs. It also extends the application of nanoparticle-linked immunosorbent assays, thereby providing the potential to quantify other proteins and apply the technology in the medical, environmental, and biotechnology industry fields.

Double-Enzyme Active Vanadium Nanospheres-Mediated Ratiometric Multicolor Immunosensors for Sensitive Detection of the T-2 Toxin

Owing to its high throughput, simplicity, and rapidity, enzyme-linked immunosorbent assay (ELISA) has attracted much attention in the field of immunoassays. However, the traditional ELISA usually affords a single signal readout and the labeling ability of the enzyme used is poor, resulting in low accuracy and a limited detection range. Herein, a vanadium nanospheres (VNSs)-mediated competitive ratio nanozymes-linked immunosorbent assay (VNSs-RNLISA) was created for the sensitive detection of the T-2 toxin (T-2). As the key to the biosensor, the VNSs with superoxide dismutase-like and peroxidase-like dual-enzyme mimetic activities were synthesized by a one-step hydrothermal method, which oxidized 1,1-diphenyl-2-picryl-hydrazyl fading and catalyzed 3,3',5,5'-tetramethylbenzidine (TMB) color development. Therefore, T-2 could not only be qualitatively measured with the naked eye but also be quantitatively evaluated by monitoring the ratio of absorbance at 450 and 517 nm wavelengths. Moreover, the characterization of a VNSs-labeled antibody probe showed strong dual-enzymatic activity, excellent stability, and high affinity with T-2 [the affinity constant (k_a) was approximately 1.36 × 10⁸ M^-1], which can significantly improve the detection sensitivity. The limit of detection of VNSs-RNLISA was 0.021 ng/mL, which was approximately 27-fold more sensitive than the single signal nanozymes-linked immunosorbent assay (0.561 ng/mL). Besides, the change in the ratio of absorbance (Δ450/Δ517) decreased linearly in a range of 0.22-13.17 ng/mL, outperforming the detection range of a single-mode nano-enzyme-linked immunosorbent assay using TMB by a factor of 1.6 times. Furthermore, the VNSs-RNLISA was successfully used to identify T-2 in maize and oat samples, with recoveries ranging from 84.216 to 125.371%. Overall, this tactic offered a promising platform for the quick detection of T-2 in food and might broaden the application range of the enzyme-linked immunosorbent assay.

Two-Dimensional Fe-N-C Single-Atomic-Site Catalysts with Boosted Peroxidase-Like Activity for a Sensitive Immunoassay

Single-atomic-site catalysts (SASCs) with peroxidase (POD)-like activities have been widely used in various sensing platforms, like the enzyme-linked immunosorbent assay (ELISA). Herein, a two-dimensional Fe-N-C-based SASC (2D Fe-SASC) is successfully synthesized with excellent POD-like activity (specific activity = 90.11 U/mg) and is used to design the ELISA for herbicide detection. The 2D structure of Fe-SASC enables the exposure of numerous single atomic active sites on the surface as well as boosts the POD-like activity, thereby enhancing the sensing performance. 2D Fe-SASC is assembled into competitive ELISA kit, which achieves an excellent detection performance for 2,4-dichlorophenoxyacetic acid (2,4-D). Fe-SASC has great potential in replacing high-cost natural enzymes and working on various advanced sensing platforms with high sensitivity for the detection of various target biomarkers.

Luminescent MOF-Based Nanofibers with Visual Monitoring and Antibacterial Properties for Diabetic Wound Healing

Diabetic wound healing remains as a serious challenge for medical circles that required continuous monitoring and effective management. Herein, the glucose oxidase/carbon dots@copper-metal-organic framework-based nanofibers (GOx/CDs@MOF NFs) were proposed as a multifunctional wound dressing, aiming to visually monitor wound pH and inhibit bacterial infection. In the diabetic wound microenvironment, the GOx/CDs@MOF NFs could convert endogenous glucose into hydroxyl radial (•OH) through the cascade catalytic reaction. In vivo and vitro experimental results confirmed that the GOx/CDs@MOF NFs could efficiently kill bacteria and promote wound healing. Additionally, CDs as a pH fluorescent indicator endowed GOx/CDs@MOF NFs with sensitive and reversible fluorescent sensing behavior to wound pH, and these visual images could also be captured by smartphones and transformed into RGB color mode (red, green, blue) values, allowing for onsite evaluation of the wound status. This multifunctional wound dressing provides a smart and effective solution for diabetic wound management and takes an immeasurable step toward the development of the next generation of digitally visualized wound dressings.

Albumin-templated platinum (II) sulfide nanodots for size-dependent cancer theranostics

Transition-metal chalcogenides, such as noble metal chalcogenides, hold tremendous potential as efficient agents for photo-induced cancer theranostics due to their unique physicochemical properties. However, a critical bottleneck still lies in exploring simple and controllable methods to synthesize noble metal chalcogenides especially PtS for in vivo photo-induced cancer imaging and simultaneous therapy. Herein, we proposed the albumin-templated synthesis of size-controllable platinum (II) sulfide nanodots (PtS-NDs) for multimodal cancer imaging and potent photothermal therapy. PtS-NDs were precisely synthesized with a tunable size ranging from 2.1 nm to 4.5 nm through a thermodynamically controlled growth inside albumin nanocages. PtS-NDs yielded significant near-infrared (NIR) absorbance and outstanding photothermal conversion under NIR laser irradiation, as well as effective resistance to photobleaching, thereby generating remarkable in vivo photoacoustic signals and distinct hyperthermia at tumor site. Moreover, these nanodots possessed efficient cellular uptake and tumor targeting capabilities in a size-dependent manner, thus leading to controllable diagnostic and thermo-therapeutic efficacy. Specifically, PtS-NDs with core diameter of 4.5 nm displayed preferable in vivo photoacoustic and CT imaging with high sensitivity, spatially and anatomically enhanced imaging contrast, together with hyperthermia mediated tumor ablation. Thus, the albumin-templated biomimetic synthesis provided an insightful strategy on fabricating theranostic PtS-NDs for potential clinical applications. STATEMENT OF SIGNIFICANCE: Noble metal chalcogenides especially PtS are of particular importance in the field of precise nanomedicine to improve both accuracy of cancer diagnosis and efficiency of tumor treatment. However, the intensively preclinical investigation of PtS was limited due to the lack of simple and controllable synthetic methods. Here, we report an albumin-templated biomineralization synthesis of platinum (II) sulfide nanodots (PtS-NDs). Specifically, albumin-templated biomineralization of PtS-NDs was induced by the electrostatic interactions between albumin and Pt²⁺, followed by the nucleation and growth inside the albumin nanocages. The resulting PtS-NDs showed good dispersibility and biosafety, as well as size-dependent photophysical properties and biological behaviors. Therefore, albumin-based biomineralization is a promising and safe strategy to facilely fabricate Pt-based chalcogenide for tumor theranostics.

Determination Methods of the Risk Factors in Food Based on Nanozymes: A Review

Food safety issues caused by foodborne pathogens, chemical pollutants, and heavy metals have aroused widespread concern because they are closely related to human health. Nanozyme-based biosensors have excellent characteristics such as high sensitivity, selectivity, and cost-effectiveness and have been used to detect the risk factors in foods. In this work, the common detection methods for pathogenic microorganisms, toxins, heavy metals, pesticide residues, veterinary drugs, and illegal additives are firstly reviewed. Then, the principles and applications of immunosensors based on various nanozymes are reviewed and explained. Applying nanozymes to the detection of pathogenic bacteria holds great potential for real-time evaluation and detection protocols for food risk factors.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

2D Co3O4 modified by IrO2 nanozyme for convenient detection of aqueous Fe2+ and intercellular H2O2

A portable sensor for visual monitoring of Fe²⁺ and H₂O₂, two-dimensional Co₃O₄ modified by nano-IrO₂ (IrO₂@2D Co₃O₄) was prepared in this work, for the first time, with the help of microwave radiation at 140 °C, which was further stabilized onto common test strips. The present IrO₂@2D Co₃O₄ possessed superior dual-function enzyme-like activity with low toxicity and excellent biocompatibility. Especially, trace Fe²⁺ and H₂O₂ could exclusively alter their enzyme-like catalytic activity with discriminating hyperchromic or hypochromic effect, i.e., from blue to colorless or to dark blue for both IrO₂@2D Co₃O₄ dispersion and its functionalized test strips. The linear regression equations were A₆₅₂ = 0.5940 - 0.00041 c_Fe²⁺ (10^-8 M, R² = 0.9927) for Fe²⁺ and ∆A₆₅₂ = 0.0023 c_H2O2 + 0.00025 (10^-7 M, R² = 0.9982) for H₂O₂, respectively. When applied to visual monitoring of aqueous Fe²⁺ and intercellular H₂O₂, the recoveries were 101.2 ~ 102.5% and 95.8 ~ 103.7% with detection limits of 1.25 × 10^-8 mol/L and 1.02 × 10^-7 mol/L, respectively, far below the permitted values in drinking water set by the World Health Organization. The mechanisms for the enhancing enzyme-mimetic activity of IrO₂@2D Co₃O₄ and its selective responses to Fe²⁺ and H₂O₂ were investigated in detail.

Recent Advances in the Immunoassays Based on Nanozymes

As a rapid and simple method for the detection of multiple targets, immunoassay has attracted extensive attention due to the merits of high specificity and sensitivity. Notably, enzyme-linked immunosorbent assay (ELISA) is a widely used immunoassay, which can provide high detection sensitivity since the enzyme labels can promote the generation of catalytically amplified readouts. However, the natural enzyme labels usually suffer from low stability, high cost, and difficult storage. Inspired by the advantages of superior and tunable catalytic activities, easy preparation, low cost, and high stability, nanozymes have arisen to replace the natural enzymes in immunoassay; they also possess equivalent sensitivity and selectivity, as well as robustness. Up to now, various kinds of nanozymes, including mimic peroxidase, oxidase, and phosphatase, have been incorporated to construct immunosensors. Herein, the development of immunoassays based on nanozymes with various types of detection signals are highlighted and discussed in detail. Furthermore, the challenges and perspectives of the design of novel nanozymes for widespread applications are discussed.

Fluorescence immunosensor based on functional nanomaterials and its application in tumor biomarker detection

An immunosensor is defined as an analytical device that detects the binding of an antigen to its specific antibody by coupling an immunochemical reaction to the surface of a device called a transducer. Fluorescence immunosensing is one of the most promising immunoassays at present, and has the advantages of simple operation, fast response and high stability. A traditional fluorescence immunosensor often uses an enzyme-labelled antibody as a recognition unit and an organic dye as a fluorescence probe, so it is easily affected by environmental factors with low sensitivity. Nanomaterials have unique photostability, catalytic properties and biocompatibility, which open up a new path for the construction of stable and sensitive fluorescence immunosensors. This paper briefly introduces different kinds of immunosensors and the role of nanomaterials in the construction of immunosensors. The significance of fluorescent immunosensors constructed from functional nanomaterials to detect tumor biomarkers was analyzed, and the strategies to further improve the performance of fluorescent immunosensors and their future development trend were summarized.

Recent Advances in Construction and Application of Metal-Nanozymes in Pharmaceutical Analysis

Nanozymes, made of emerging nanomaterials, have similar activity to natural enzyme and exhibit promising applications in in the fields of environment, biology and medicine, and food safety science. In recent years, with the deep finding and research to nanozymes by researchers, its application in field of pharmaceutical analysis has emerged gradually, possessing great significance in drug safety evaluation and quality control. This review summarizes the construction of metal nanozymes, strategies to improve their performance and their application in pharmaceutical detection and analysis, especially in detection of target analytes consisting of small molecule medicine macromolecule, toxic and others, which proposes theoretical foundation for development of nanozymes in this field. At the same time, it also provides opportunities and challenges for the construction and application of new nanozymes.

On-bead DNA synthesis triggered by allosteric probe for detection of carcinoembryonic antigen

Sensitive quantification of protein biomarkers is highly desired for clinical diagnosis and treatment. Yet, unlike DNA/RNA which can be greatly amplified by PCR/RT-PCR, the amplification and detection of trace amount of proteins remain a great challenge. Here, we combined allosteric probe (AP) with magnetic bead (MB) for assembling an on-bead DNA synthesis system (named as APMB) to amplify protein signals. The AP is designed and conjugated onto the MB, enabling the protein biomarker to be separated and enriched. Once recognizing the biomarker, the AP alters its conformation to initiate DNA synthesis on beads for primary signal amplification. During the DNA synthesis, biotin-dATPs are incorporated into the newly synthesized DNA strands. Then, the biotin-labeled DNA specifically captures streptavidin (STR)–conjugated horseradish peroxidase (HRP), which is used to catalyze a colorimetric reaction for secondary signal amplification. By using carcinoembryonic antigen (CEA) as a protein model, the APMB can quantify protein biomarkers of as low as 0.01 ng/mL. The response values measured by APMB are linearly related to the protein concentrations in the range 0.05 to 20 ng/mL. Clinical examination demonstrated good practicability of the APMB in quantifying serum protein biomarker. The on-bead DNA synthesis could be exploited to improve protein signal amplification, thus facilitating protein biomarker detection of low abundance for early diagnosis.

Golf-shaped Bi2Se3 microparticles based-immunochromatographic strip for ultrasensitive detection of Acetamiprid

Rapid and sensitive detection of pesticide is of significance to the field of food safety and human health, but it is still challenging due to interferents from complex food matrices. Herein, a superb golf-shaped Bi₂Se₃ microparticles-based immunochromatographic strip (BS MPs-ICS) was constructed for ultrasensitive detection of acetamiprid (ATM). The novel immune signal tag demonstrated outstanding luminance, excellent biocompatibility, and high affinity with ATM (affinity constant was 3.874 ×10⁷ M^-1), which not only possessed a preeminent labeling efficiency but also significantly improved detection sensitivity. After optimization, the limit of detection (LOD) of the BS MPs-ICS was 8.780 pg/mL with an excellent linear relationship at the range of 0.010-6.000 ng/mL, which was approximately 62-fold lower than that of conventional gold nanoparticles-ICS (0.545 ng/mL), The BS MPs-ICS biosensor was well applied in apple and tomato samples with satisfactory recoveries of 83.823-99.223% (relative standard deviation < 1.739%). Therefore, the BS MPs-ICS could serve as a promising candidate for ATM detection in complicated samples and develop a new method in real-time monitoring.

Self-triggered fluorescent metal-organic framework mimic enzyme for competitive immunoassay of hypoglycemic drug in functional tea

Colorimetric or fluorescent biosensors based on mimic enzymes have come into the spotlight in virtue of their visual detection. In traditional visual sensors, fluorescent-changing or color-changing substances should be introduced for the catalytic reaction with mimic enzymes. Herein, a mimic enzyme (Au@Fe-MIL-88B) with self-triggered fluorescent property was prepared. By incorporating Au nanoparticles (Au NPs) in Fe-MIL-88B, a higher peroxidase activity of Au@Fe-MIL-88B was monitored due to the synergistic effect between Au NPs and Fe-MIL-88B. Besides, Au NPs can change the valence of Fe ion in metal organic framework (MOF), thus lower background fluorescence was discovered, but the addition of H₂O₂ can trigger the self-fluorescence of Au@Fe-MIL-88B. By using Au@Fe-MIL-88B as a label to anchor secondary antibody, a competitive immunosensor based on fluorescence and photoelectrochemistry was constructed for the immunoassay of rosiglitazone (RSG), a kind of hypoglycemic drug. Finally, a portable instrument was homemade for the on-site and convenient detection of RSG in functional tea. This self-triggered fluorescent MOF may provide a possible route to design biosensors for the detection of hazardous materials.

Recent advances in biomedical applications of 2D nanomaterials with peroxidase-like properties

Significant progress has been made in developing two-dimensional (2D) nanomaterials owing to their ultra-thin structure, high specific surface area, and many other advantages. Recently, 2D nanomaterials with enzyme-like properties, especially peroxidase (POD)-like activity, are highly desirable for many biomedical applications. In this review, we first classify the types of 2D POD-like nanomaterials and then summarize various strategies for endowing 2D nanomaterials with POD-like properties. Representative examples of biomedical applications are reviewed, emphasizing in antibacterial, biosensing, and cancer therapy. Last, the future challenges and prospects of 2D POD-like nanomaterials are discussed. This review is expected to provide an in-depth understanding of 2D POD-like materials for biomedical applications.

In situ synthesis of Co-doped MoS2 nanosheet for enhanced mimicking peroxidase activity

To enhance the catalytic activity of two-dimensional layered materials as versatile materials, the modification of transition metal dichalcogenide nanosheets such as MoS₂ by doping with heteroatoms has drawn great interests. However, few reports are available on the study of the enzyme-like activity of doped MoS₂. In this study, a facile in situ hydrothermal method for the preparation of various ultrathin transition metals (Fe, Cu, Co, Mn, and Ni) doped MoS₂ nanosheets has been reported. Through the density functional theory (DFT) and steady-state kinetic analysis, the Co-doped MoS₂ nanosheets exhibited the highest peroxidase-like catalytic activity among them. Furthermore, a typical colorimetric assay for H₂O₂ was presented based on the catalytic oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product (oxTMB) by Co-MoS₂. The proposed colorimetric method showed excellent tolerance under extreme conditions and a broad linear range from 0.0005 to 25 mM for H₂O₂ determination. Concerning the practical application, in situ detection of H₂O₂ generated from SiHa cells was also fulfilled, fully confirming the great practicability of the proposed method in biosensing fields.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-022-07201-z.

Catalytic Hairpin Assembly-Driven Ratiometric Dual-Signal Electrochemical Biosensor for Ultrasensitive Detection of MicroRNA Based on the Ratios of Fe-MOFs and MB-GA-UiO-66-NH2

In this work, a novel ratio electrochemical biosensing platform based on catalytic hairpin assembly target recovery to trigger dual-signal output was developed for ultrasensitive detection of microRNA (miRNA). To achieve the ratiometric dual-signal strategy, methylene blue (MB), an electrochemical indicator, was ingeniously loaded into the pores of graphene aerogel (GA) and metal-organic framework (MOF) composites with high porosity and large specific surface area, and another electrochemical indicator Fe-MOFs with distinct separation of redox potential was selected as a signal probe. Concretely, with the presence of the target miRNA, the CHA process was initiated and the signal probe was introduced to the electrode surface, producing abundant double-stranded H1-H2@Fe-MOFs-NH₂. Then, the measurement and analysis of the prepared ratiometric electrochemical biosensor by differential pulse voltammetry (DPV) showed that the introduction of the target miRNA led to an increase in the oxidation peak signal of Fe-MOFs (+0.8 V) and a decrease in the oxidation peak signal of MB (-0.23 V). Therefore, the peak current ratio of I_Fe-MOFs/I_MB could be employed to accurately reflect the actual concentration of miRNA. Under optimal conditions, the detection limit of the proposed biosensor was down to 50 aM. It was worth noting that the proposed biosensor exhibited excellent detection performance in a complex serum environment and tumor cell lysates, showing great potential in biosensing and clinical diagnosis.

Colorimetric Aptasensor Based on Fe₃O₄-Cu2+ Nanozyme with Intrinsic Peroxidase-Like Activity in the Detection of Breast Cancer Exosomes

Because breast cancer cells such as MCF-7, exhibit vital and developmental signs by exosome secretion, diagnosing them in the blood can provide a good index of the presence of breast cancer. However, accurate and inexpensive detection of exosomes in clinical practice faces challenges. Therefore, in the presents study, an aptasensor based on CD63 aptameriron oxide-copper ion nanozymes (Fe₃O₄-Cu²⁺-NZs) was designed with the ability of the CD63 aptamer to interact with the exosome and the release of the Fe₃O₄-Cu²⁺-NZs for peroxidase-like activity on the tetramethylbenzidine (TMB). After fabrication of CD63 aptamer-Fe₃O₄-Cu²⁺-NZs based on hydrothermal method, their physicochemical properties were investigated with the SEM, TEM, DLS, Zeta, XRD and magnetization. To investigate the interaction of CD63 aptamer-Fe₃O₄-Cu²⁺-NZs with exosomes, the required exosomes were extracted from cultured MCF-7 cells. The performance of CD63 aptamer-Fe₃O₄-Cu²⁺-NZs on TMB degradation in the presence and absence of exosomes was investigated through UV-vis adsorption and ocular observations based on colour changes on laboratory and real samples. The results show that the absence of exosomes significantly inhibited the peroxidase-like activity of CD63 aptamer-Fe₃O₄-Cu²⁺-NZs due to the aptamer coating. Under optimal conditions, the designed CD63 aptamer-Fe₃O₄-Cu²⁺-NZs is capable of detecting exosomes in the range of 1.4 × 10⁴-5.6 × 10⁵ particles/μL with a detection limit of 5.91 × 10³ particles/μL. Also, this method showed a satisfactory outcome in detection of cancer cells in real samples. Overall, this colorimetric aptasensor can be used to diagnose breast cancer cells based on a simple and inexpensive approach.

Nano-biotechnology, an applicable approach for sustainable future

Nanotechnology is one of the most emerging fields of research within recent decades and is based upon the exploitation of nano-sized materials (e.g., nanoparticles, nanotubes, nanomembranes, nanowires, nanofibers and so on) in various operational fields. Nanomaterials have multiple advantages, including high stability, target selectivity, and plasticity. Diverse biotic (e.g., Capsid of viruses and algae) and abiotic (e.g., Carbon, silver, gold and etc.) materials can be utilized in the synthesis process of nanomaterials. "Nanobiotechnology" is the combination of nanotechnology and biotechnology disciplines. Nano-based approaches are developed to improve the traditional biotechnological methods and overcome their limitations, such as the side effects caused by conventional therapies. Several studies have reported that nanobiotechnology has remarkably enhanced the efficiency of various techniques, including drug delivery, water and soil remediation, and enzymatic processes. In this review, techniques that benefit the most from nano-biotechnological approaches, are categorized into four major fields: medical, industrial, agricultural, and environmental.

Rose petals-like Bi semimetal embedded on the zeolitic imidazolate frameworks based-immunochromatographic strip to sensitively detect acetamiprid

Ultrasensitive and facile detection of Acetamiprid (ACE) is of exceptional significance to assess the environmental and biological pollution. In this study, an advanced Bi semimetal/Zeolitic imidazolate frameworks hybrid material-based immunochromatographic strip (Bi/ZIF HM-ICS) sensor was developed for the sensitive detection of ACE. The novel Bi/ZIF HM was prepared through one-pot hydrothermal reduction of Bi nanoparticles on ZIF, which was selected as a signal tag taking advantages of its excellent color intensity, strong affinity with monoclonal antibodies (mAbs), and favorable biocompatibility. Bi/ZIF HM could not only improve the utilization efficiency of mAbs but also boost the sensing performance. Under optimal conditions, the limit of detection (LOD) of the Bi/ZIF HM-ICS was 4.68 pg/mL with the linear range from 0.01 ng/mL to 6 ng/mL, which was 98-fold lower than that of traditional gold nanoparticles-based ICS (0.457 ng/mL), and the recoveries of the Bi/ZIF HM-ICS ranged from 80.27% to 118.52% with the relative standard deviation (RSD) below 3.67% in pear, apple, tomato, and cucumber. Overall, the practical application of the Bi/ZIF HM-ICS in complicated samples was realized for detecting pesticide residue, and expanding its application scope in monitoring environment.

Simultaneously colorimetric detection and effective removal of mercury ion based on facile preparation of novel and green enzyme mimic

In this work, an environmentally-friendly and cost-effective enzyme mimic was obtained by facile one-pot preparation of chitosan/Cu/Fe (CS/Cu/Fe) composite. This composite exhibited significantly enhanced oxidase-mimicking activity during catalyzing the oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB). The CS/Cu/Fe composite was comprehensively characterized and the possible catalytic mechanism was reasonably explored and discussed. Benefiting from the thermal stability and the compatibility with carbohydrate, the CS/Cu/Fe composite was further integrated with agarose hydrogel to fabricate a portable analytical tube containing oxidase mimic. Based on the inhibition of the catalytic oxidation of TMB in the presence of cysteine, as well as the recovery of oxidase-like activity of CS/Cu/Fe due to the specific complexation of cysteine and mercury ion (Hg²⁺), the rapid colorimetric detection of Hg²⁺ was successfully carried out in the analytical tube. This colorimetric method showed good linear response to Hg²⁺ over the range from 40 nM to 8.0 μM with a detection limit of 8.9 nM. The method also revealed high selectivity and satisfactory results in recovery experiments of Hg²⁺ detection in tap water and lake water. Furthermore, it was found that the effective removal of Hg²⁺ could be realized in the analytical tube based on efficient Hg²⁺ adsorption by CS/Cu/Fe composite and agarose hydrogel. This study not only prepared a robust and low-cost enzyme mimic, but also proposed a smart strategy to simultaneously monitor and remove toxic Hg²⁺ from contaminated water.

Enhanced peroxidase-like activity of bimetal (Fe/Co) MIL-101 for determination of tetracycline and hydrogen peroxide

The peroxidase-like activity of MIL-101(Fe/Co) is improved by adding tetracycline. On the basis of MIL-101(Fe/Co), fast colorimetric sensors of tetracycline and H2O2 have been successfully constructed.

Manganese-doped iron coordination polymer nanoparticles with enhanced peroxidase-like activity for colorimetric detection of antioxidants

A convenient and sensitive antioxidant assay with high performance is essential for assessing food quality and monitoring the oxidative stress level of biological matrices. Although coordination polymer nanoparticles (CPNs)-based nanozymes have emerged as candidates in the analytical field, strategies to improve the catalytic activity of CPNs have been scarcely revealed and studied. Herein, we demonstrate a manganese (Mn) doping strategy to enhance the peroxidase-mimetic activity of Fe-based CPNs. By tuning the Mn doping amounts and selecting 2,5-dihydroxyterephthalic acid (H₄DHTP) as ligands, the produced nanozymes in amorphous state followed the catalytic activity order of Fe₅Mn-DHTP > Fe₈Mn-DHTP > Fe₂Mn-DHTP > Fe-DHTP > Mn-DHTP. Ulteriorly, benefitting from the best catalytic performance and definite catalytic mechanism of Fe₅Mn-DHTP, versatile colorimetric assays for ultrasensitive detection of one exogenous antioxidant (ascorbic acid, AA) and two endogenous antioxidants (glutathione, GSH; cysteine, Cys) have been deftly devised based on the inhibition of the 3,3',5,5'-tetramethylbenzidine chromogenic reaction in presence of H₂O₂. It was found that mercaptan (GSH and Cys) and AA exhibited different inhibition mechanisms. Practically, such a colorimetric assay was viable to determine the total antioxidant capacity of drugs and foods with desirable results. This work proposes a feasible strategy for embellishing CPN nanozymes used for designing sensitive and convenient assays for various antioxidants based on an explicit detection mechanism.

Nanozyme Catalytic Turnover and Self-Limited Reactions

Enzymes have catalytic turnovers. The field of nanozyme endeavors to engineer nanomaterials as enzyme mimics. However, a discrepancy in the definition of "nanozyme concentration" has led to an unrealistic calculation of nanozyme catalytic turnovers. To date, most of the reported works have considered either the atomic concentration or nanoparticle (NP) concentration as nanozyme concentration. These assumptions can lead to a significant under- or overestimation of the catalytic activity of nanozymes. In this article, we review some classic nanozymes including Fe₃O₄, CeO₂, and gold nanoparticles (AuNPs) with a focus on the reported catalytic activities. We argue that only the surface atoms should be considered as nanozyme active sites, and then the turnover numbers and rates were recalculated based on the surface atoms. According to the calculations, the catalytic turnover of peroxidase Fe₃O₄ NPs is validated. AuNPs are self-limited when performing glucose-oxidase like activity, but they are also true catalysts. For CeO₂ NPs, a self-limited behavior is observed for both oxidase- and phosphatase-like activities due to the adsorption of reaction products. Moreover, the catalytic activity of single-atom nanozymes is discussed. Finally, a few suggestions for future research are proposed.

Axial Ligand-Engineered Single-Atom Catalysts with Boosted Enzyme-Like Activity for Sensitive Immunoassay

Inspired by the key role of the coordination environment in the catalytic activity of enzymes, a rational design of the coordination structure of active sites at the atom scale is expected to develop high-performance enzyme-like catalysts. Here, we design a simple model system involving pentacoordinated and tetracoordinated Fe-N-C single-atom catalysts (named NG-Heme and G-Heme, respectively) to investigate structure-activity relationships. NG-Heme with axial ligand-engineered Fe sites exhibits superior enzyme-like activity to G-Heme, achieving the goal of vivid mimicking of the active sites of peroxidase. Experiments and theoretical studies reveal that the enhanced intrinsic catalytic activity originates from the "push effect" of the additional axial ligand, which can strengthen the interaction between the active site and the intermediate. Based on the outstanding catalytic activity, an NG-Heme-linked immunosorbent assay was constructed for colorimetric detection of carcinoembryonic antigen, exhibiting satisfactory sensitivity and feasibility in the analysis of clinical samples.

Immobilizing Enzymes on Noble Metal Hydrogel Nanozymes with Synergistically Enhanced Peroxidase Activity for Ultrasensitive Immunoassays by Cascade Signal Amplification

Enzyme immobilization plays an essential role in solving the problems of the inherently fragile nature of enzymes. Although prominent stability and reuse of enzymes can be achieved by enzyme immobilization, their bioactivity and catalytic efficiency will be adversely affected. Herein, PdCu hydrogel nanozymes with a hierarchically porous structure were used to immobilize horseradish peroxidase (HRP) to obtain PdCu@HRP. In addition to the improvement of stability and reusability, PdCu@HRP displayed synergistically enhanced activities than native HRP and PdCu hydrogels. Not only the specific interactions between PdCu hydrogel nanozymes and enzymes but also the enrichment of substrates around enzymes by electrostatic adsorption of hydrogels was proposed to expound the enhanced catalytic activity. Accordingly, by taking advantage of the excellent catalytic performance of the PdCu@HRP and the glucose oxidase encapsulated in zeolitic imidazolate framework-8, colorimetric biosensing of the carcinoembryonic antigen via catalytic cascade reactions for achieving signal amplification was performed. The obtained biosensor enhanced the detection sensitivity by approximately 6.1-fold as compared to the conventional HRP-based enzyme-linked immunosorbent assay, demonstrating the promising potential in clinical diagnosis.