Degradation of Cellulose Derivatives in Laboratory, Man-Made, and Natural Environments

Nanocellulose-short peptide self-assembly for improved mechanical strength and barrier performance

Cellulose nanofibers (CNF) are the most abundant renewable nanoscale fibers on Earth, and their use in the design of hybrid materials is ever more acclaimed, although it has been mostly limited, to date, to CNF derivatives obtained via covalent functionalization. Herein, we propose a noncovalent approach employing a set of short peptides - DFNKF, DF(I)NKF, and DF(F5)NKF - as supramolecular additives to engineer hybrid hydrogels and films based on unfunctionalized CNF. Even at minimal concentrations (from 0.1% to 0.01% w/w), these peptides demonstrate a remarkable ability to enhance CNF rheological properties, increasing both dynamic moduli by more than an order of magnitude. Upon vacuum filtration of the hydrogels, we obtained CNF-peptide films with tailored hydrophobicity and surface wettability, modulated according to the peptide content and halogen type. Notably, the presence of fluorine in the CNF-DF(F5)NKF film, despite being minimal, strongly enhances CNF water vapor barrier properties and reduces the film water uptake. Overall, this approach offers a modular, straightforward method to create fully bio-based CNF-peptide materials, where the inclusion of DFNKF derivatives allows for facile functionalization and material property modulation, opening their potential use in the design of packaging solutions and biomedical devices.

Stretchable and biodegradable plant-based redox-diffusion batteries

The redox-diffusion (RD) battery concept introduces an environmentally friendly solution for stretchable batteries in autonomous wearable electronics. By utilising plant-based redox-active biomolecules and cellulose fibers for the electrode scaffold, separator membrane, and current collector, along with a biodegradable elastomer encapsulation, the battery design overcomes the reliance on unsustainable transition metal-based active materials and non-biodegradable elastomers used in existing stretchable batteries. Importantly, it addresses the drawback of limited attainable battery capacity, where increasing the active material loading often leads to thicker and stiffer electrodes with poor mechanical properties. The concept decouples the active material loading from the mechanical structure of the electrode, enabling high mass loadings, while retaining a skin-like young's modulus and stretchability. A stretchable ion-selective membrane facilitates the RD process, allowing two separate redox couples, while preventing crossovers. This results in a high-capacity battery cell that is both electrochemically and mechanically stable, engineered from sustainable plant-based materials. Notably, the battery components are biodegradable at the end of their life, addressing concerns of e-waste and resource depletion.

Biodegradable Natural Hydrogels for Tissue Engineering, Controlled Release, and Soil Remediation

This article provides insights into hydrogels of the most promising biodegradable natural polymers and their mechanisms of degradation, highlighting the different possibilities of controlling hydrogel degradation rates. Since biodegradable hydrogels can be designed as scaffolding materials to mimic the physical and biochemical properties of natural tissues, these hydrogels have found widespread application in the field of tissue engineering and controlled release. In the same manner, their potential as water reservoirs, macro- and microelement carriers, or matrixes for the selective adsorption of pollutants make them excellent candidates for sustainable soil amendment solutions. Accordingly, this article summarizes the recent advances in natural biodegradable hydrogels in the fields of tissue engineering, controlled release, and soil remediation, emphasizing the new opportunities that degradability and its tunability offer for the design and applicability of hydrogels.

Designing for Degradation: Transient Devices Enabled by (Nano)Cellulose

Transient technology involves materials and devices that undergo controlled degradation after a reliable operation period. This groundbreaking strategy offers significant advantages over conventional devices based on non-renewable materials by limiting environmental exposure to potentially hazardous components after disposal, and by increasing material circularity. As the most abundant naturally occurring polymer on Earth, cellulose is an attractive material for this purpose. Besides, (nano)celluloses are inherently biodegradable and have competitive mechanical, optical, thermal, and ionic conductivity properties that can be exploited to develop sustainable devices and avoid the end-of-life issues associated with conventional systems. Despite its potential, few efforts have been made to review current advances in cellulose-based transient technology. Therefore, this review catalogs the state-of-the-art developments in transient devices enabled by cellulosic materials. To provide a wide perspective, the various degradation mechanisms involved in cellulosic transient devices are introduced. The advanced capabilities of transient cellulosic systems in sensing, photonics, energy storage, electronics, and biomedicine are also highlighted. Current bottlenecks toward successful implementation are discussed, with material circularity and environmental impact metrics at the center. It is believed that this review will serve as a valuable resource for the proliferation of cellulose-based transient technology and its implementation into fully integrated, circular, and environmentally sustainable devices.

Zwitterionic modified and freeze-thaw reinforced foldable hydrogel as intraocular lens for posterior capsule opacification prevention

Posterior capsule opacification (PCO) is a predominant postoperative complication, often leading to visual impairment due to the aberrant proliferation and adhesion of lens epithelial cells (LECs) and protein precipitates subsequent to intraocular lens (IOL) implantation. To address this clinical issue, a foldable and antifouling sharp-edged IOL implant based on naturally-derived cellulose hydrogel is synthesized. The mechanical strength and transparency of the hydrogel is enhanced via repeated freeze-thaw (FT) cycles. The incorporated zwitterionic modifications can remarkably prevent the incidence of PCO by exhibiting proteins repulsion and cell anti-adhesion properties. The graft of dopamine onto both the haptic and the periphery of the posterior surface ensures the adhesion of the hydrogel to the posterior capsule and impedes the migration of LECs without compromising transparency. In in vivo study, the zwitterionic modified foldable hydrogel exhibits uveal and capsular biocompatibility synchronously with no signs of inflammatory response and prevent PCO formation, better than that of commercialized and PEG-modified IOL. With foldability, endurability, antifouling effect, and adhesive to posterior capsule, the reported hydrogel featuring heterogeneous surface design displays great potential to eradicate PCO and attain post-operative efficacy after cataract surgery.

Assessment of the Biodegradability and Compostability of Finished Leathers: Analysis Using Spectroscopy and Thermal Methods

In this study, the biodegradation properties of leather treated with various finishing chemicals were evaluated in order to enhance the sustainability of leather processing. We applied advanced analytical techniques, including FT-IR, thermogravimetric analysis (TGA), and solid-state NMR spectroscopy. Leather samples treated with different polymers, resins, bio-based materials, and traditional finishing agents were subjected to a composting process under controlled conditions to measure their biodegradability. The findings revealed that bio-based polyurethane finishes and acrylic wax exhibited biodegradability, while traditional chemical finishes like isocyanate and nitrocellulose lacquer showed moderate biodegradation levels. The results indicated significant differences in the biodegradation rates and the impact on plant germination and growth. Some materials, such as black pigment, nitrocellulose lacquer and wax, were beneficial for plant growth, while others, such as polyurethane materials, had adverse effects. These results support the use of eco-friendly finishes to reduce the environmental footprint of leather production. Overall, this study underscores the importance of selecting sustainable finishing chemicals to promote eco-friendly leather-manufacturing practices.

Oleic acid decorated kraft lignin as a hydrophobic and functional filler of cellulose acetate films

The packaging industry has primarily been dominated by single-use, petrochemical-sourced plastic materials despite their short-term use. Their leakage into the ecosystem after their use poses substantial environmental concerns. As a result, compostable and renewable packaging material alternatives are garnering significant attention. Cellulose acetate is a derivative of cellulose that exhibits excellent tensile properties, transparency, melt processability, and intermediate compostability. However, its application in the food packaging industry is limited due to its hygroscopic behavior and lack of dimensional stability. This study investigated using lignin (pristine and esterified) as a functional additive of cellulose acetate. The effect of varying concentrations of pristine kraft and oleic acid functionalized lignin in the cellulose acetate matrix and its effect on the resulting film's mechanical, morphological, viscoelastic, and water barrier properties were explored. Comprehensive characterization of the thermomechanical processed lignin-cellulose acetate sheets revealed reduced moisture absorption, improved UV and moisture barrier, and enhanced tensile properties with melt processability. Overall, the studied films could have appealing properties for food and other packaging applications, thus, serving as eco-friendly and sustainable alternatives to conventional petroleum-derived packing materials.

Combining and concentrating nanocelluloses for cryogels with remarkable strength and wet resilience

Cellulose cryogels are promising eco-friendly materials that exhibit low density, high porosity, and renewability. However, the applications of these materials are limited by their lower mechanical and water resistance compared to petrochemical-based lightweight materials. In this work, nanocelluloses were functionalized with cationic and anionic groups, and these nanomaterials were combined to obtain strong and water-resilient cryogels. To prepare the cryogels, anionic and cationic micro- and nanofibrils (CNFs) were produced at three different sizes and combined in various weight ratios, forming electrostatic complexes. The complex phase was concentrated by centrifugation and freeze-dried. Porous and open cellular structures were assembled in all compositions tested (porosity >90 %). Compressive testing revealed that the most resistant cryogels (1.7 MPa) were obtained with equivalent amounts of negatively and positively charged CNFs with lengths between 100 and 1200 nm. The strength at this condition was achieved as CNF electrostatic complexes assembled in thick cells, as observed by synchrotron X-ray tomography. In addition to mechanical strength, electrostatic complexation provided remarkable structural stability in water for the CNF cryogels, without compromising their biodegradability. This route by electrostatic complexation is a practical strategy to combine and concentrate nanocelluloses to tailor biodegradable lightweight materials with high strength and wet stability.

Upcycling Low-Quality Cotton Fibers into Mulch Gel Films in a Fast Closed Carbon Cycle

Low-quality cotton fibers, often overlooked as low-value materials, constitute a marginalized waste stream in the cotton industry. This study endeavored to repurpose these fibers into mulch gel films, specifically exploring their efficacy in covering moisture-controlled soil beds. Through a meticulously designed series of processing methods, cellulose/glycerol film was successfully fabricated by regenerating cellulose hydrogels in N,N-dimethylacetamide/lithium chloride solutions, followed by plasticization in glycerol/water solutions and hot pressing. The film was then employed to cover soil beds for a duration of up to 252 days, followed by soil burial assessments. Despite expectations of degradation, the film maintained structural integrity throughout the soil covering period but underwent complete biodegradation after 80 days of soil burial, thereby completing a closed carbon cycle. Intriguingly, both tensile strength and modulus exhibited no diminishment but instead increased after soil covering, contrary to expectations given the usual role of degradation. Mechanistic insights revealed that the removal of glycerol contributed to the mechanical enhancement, while microbial activity predominately decomposed the amorphous regions in soil covering and targeted the crystalline portions in soil burial, elucidating the main biodegradation mechanisms. In summary, this study presents, for the first time, the potential of upcycling low-quality cotton fibers into high-value mulch gel films for agricultural practices within a closed carbon cycle.

Analysis of environmental biodegradability of cellulose-based pharmaceutical excipients in aqueous media

Pharmaceutical cellulosic polymers will inevitably reach natural water systems if they are not removed after entering wastewater. Biodegradation of organic chemicals in sewage or in the aquatic environment is an important removal mechanism. In this study, we investigated the environmental biodegradation of 14 cellulose derivatives commonly utilized as pharmaceutical excipients using three different test systems that are based on the closed bottle test (OECD 301D) and the manometric respirometry test (OECD 301F). For the different cellulose derivatives tested, we observed varying degrees of biodegradation ranging from 0 to 20.4 % chemical oxygen demand (COD). However, none met the criteria for classification as 'readily biodegradable'. In addition, 10 out of 14 cellulose derivatives and/or their possible transformation products formed during the experiments, may exhibit possible toxic inhibitory effects on the inoculum. This includes one or several derivatives of hydroxy propyl methyl cellulose, hydroxy propyl cellulose, methyl cellulose, ethyl cellulose, and hydroxy ethyl cellulose. Based on the results obtained, we have developed a graded classification score ('traffic light system') for excipient biodegradation. This could help streamline the assessment and classification of cellulose derivatives concerning risk of persistence and potential adverse environmental effects, thereby assisting in the prioritization of more favorable compounds. In the long term, however, excipients should be designed from the very beginning to be biodegradable and mineralizable in the environment ('benign by design').

Microwave-assisted synthesis of crosslinked ureido chitosan for hemostatic applications

In this study, we present a facile method for introducing hydrophilic ureido groups (NH2-CO-NH-) into chitosan using a microwave-assisted reaction with molten urea, with the aim of enhancing chitosan's interaction with blood components for improved hemostasis. The formation of the ureido groups through nucleophilic addition reaction between the amine groups in chitosan and in situ generated isocyanic acid was confirmed by FTIR, CP/TOSS 13C NMR, and CP/MAS 15N NMR spectroscopic techniques. However, in stark contrast to the glucans, the said modification introduced extensive crosslinking in chitosan. Spectroscopic studies identified these crosslinks as carbamate bridges (-NH-COO-), which were likely formed by the reaction between the ureido groups and hydroxyl groups of adjacent chains through an isocyanate intermediate. These carbamate bridges improved ureido chitosan's environmental stability, making it particularly resistant to changes in pH and temperature. In comparison to chitosan, the crosslinked ureido chitosan synthesized here exhibited good biocompatibility and cell adhesion, rapidly arrested the bleeding in a punctured artery with minimal hemolysis, and induced early activation and aggregation of platelets. These properties render it an invaluable material for applications in hemostasis, particularly in scenarios that necessitate stability against pH variations and degradation.

Nanocellulose: Structure, modification, biodegradation and applications in agriculture as slow/controlled release fertilizer, superabsorbent, and crop protection: A review

This review investigates the potential of nanocellulose in agriculture, encompassing its structure, synthesis, modification, and applications. Our investigation of the characteristics of nanocellulose includes a comprehensive classification of its structure. Various mechanical, chemical and enzymatic synthesis techniques are evaluated, each offering distinct possibilities. The central role of surface functionalization is thoroughly examined. In particular, we are evaluating the conventional production of nanocellulose, thus contributing to the novelty. This review is a pioneering effort to comprehensively explore the use of nanocellulose in slow and controlled release fertilizers, revolutionizing nutrient management and improving crop productivity with reduced environmental impact. Additionally, our work uniquely integrates diverse applications of nanocellulose in agriculture, ranging from slow-release fertilizers, superabsorbent cellulose hydrogels for drought stress mitigation, and long-lasting crop protection via nanocellulose-based seed coatings. The study ends by identifying challenges and unexplored opportunities in the use of nanocellulose in agriculture. This review makes an innovative contribution by being the first comprehensive study to examine the multiple applications of nanocellulose in agriculture, including slow-release and controlled-release fertilizers.

Fabrication of biodegradable cellulose acetate nanofibers containing Rose Bengal dye by electrospinning technique and their antiviral efficacy under visible light irradiation

Biodegradable cellulose acetate (CA) nanofibers containing Rose Bengal (RB) dye were fabricated by electrospinning technique. RB dye, an anionic photosensitizer, has been used in photodynamic therapy due to its excellent biocompatibility and ability to absorb light to generate reactive oxygen species (ROS), but has a decisive disadvantage of water solubility on infection prevention. Firstly, water-insoluble RB dye was synthesized through complexation with cationic ionic liquid (IL) for antiviral agents. The synthesized water-insoluble RB dyes were embedded into biodegradable CA nanofibers by electrospinning. The electrospun nanofibers passed both antiviral test for φx174 virus under visible light irradiation and biodegradability-test using enzymes. The fabricated RB nanofibers absorbed light and generated ROS to inactivate the virus. As a result, the log reduction (-Log10(N/N0)) of φx174 titer under visible light reached a detection limit of 5.00 within 30 min. Also, the fabricated nanofibers were degraded up to 34 wt % in 9 weeks by lipase and cellulase enzymes compared with non-biodegradable nanofibers.

Advancing agriculture through bioresource technology: The role of cellulose-based biodegradable mulches

Agriculture plays a pivotal role in meeting the world's ever-growing food demands. However, traditional agricultural practices often have negative consequences for the environment, such as soil erosion and chemical runoff. Recently, there has been a pressing need for advance agricultural practices. Cellulose-based mulches offer a solution by optimizing agricultural productivity while minimizing harm. These mulches are made from renewable bioresources derived from cellulose-rich materials. Compared to plastic mulches, cellulose-based alternatives show potential in improving nutrient retention, soil health, weed suppression, water conservation, and erosion mitigation. The article investigates the characteristics and application methods of cellulose-based mulches, highlighting their biodegradability, water retention, crop protection, and weed suppression capabilities. It also evaluates their economic feasibility, emphasizing their potential to transform sustainable farming practices. Overall, cellulose-based mulches have the potential to revolutionize agriculture, addressing environmental concerns while optimizing productivity. They represent a significant step toward a more sustainable and resilient agricultural system.

Biodegradation behavior of acetylated lignin added polylactic acid under thermophilic composting conditions

Acetylated lignin (AL) can improve compatibility with commercial plastic polymers compared to existing lignin and can be used as an effective additive for eco-friendly biocomposites. For this reason, AL can be effectively incorporated into polylactic acid (PLA)-based biocomposites, but its biodegradation properties have not been investigated. In this study, biodegradation experiments were performed under mesophilic and thermophilic conditions to determine the effect of AL addition on the biodegradation characteristics of PLA-based biocomposites. As a result, the PLA-based biocomposite showed a faster biodegradation rate in a thermophilic composting environment, which is higher than the glass transition temperature of PLA, compared to a mesophilic environment. 16S rDNA sequencing results showed that differences in microbial communities depending on mesophilic and thermophilic environments strongly affected the biodegradation rate of lignin/PLA biocomposites. Importantly, the addition of AL can effectively delay the thermophilic biodegradation of PLA biocomposites. As a result of tracking the changes in physicochemical properties according to the biodegradation period in a thermophilic composting environment, the main biodegradation mechanism of AL/PLA biocomposite hydrolysis. It proceeded with cleavage of the PLA molecular chain, preferential biodegradation of the amorphous region, and additional biodegradation of the crystalline region. Above all, adding AL can be proposed as an effective additive because it can minimize the decline in the mechanical properties of PLA and delay the biodegradation rate more effectively compared to existing kraft lignin (KL).

Aging Process of Biocomposites with the PLA Matrix Modified with Different Types of Cellulose

In the modern world, many products are disposable or have a very short lifespan, while at the same time, those products are made from materials that will remain in the environment in the form of waste for hundreds or even thousands of years. It is a serious problem; non-biodegradable polymer wastes are part of environmental pollution and generate microplastics, which accumulate in the organisms of living beings. One of the proposed solutions is biodegradable polymers and their composites. In our work, three types of polylactide-based composites with plant-derived fillers: microcellulose powder, short flax fibers, and wood flour at 2 wt.% were prepared. Poly(lactic acid) (PLA)-based biocomposite properties were characterized in terms of mechanical and surface properties together with microscopic analysis and Fourier-transform infrared spectroscopy (FTIR), before and after a UV (ultraviolet)-light-aging process to determine the effects of each cellulose-based additive on the UV-induced degradation process. This research shows that the addition of a cellulose additive can improve the properties of the material in terms of the UV-aging process, but the form of the chosen cellulose form plays a crucial role in this case. The testing of physicochemical properties demonstrated that not only can mechanical properties be improved, but also the time of degradation under UV light exposure can be controlled by the proper selection of the reinforcing phase and the parameters of the extrusion and injection molding process. The obtained results turned out to be very interesting, not only in terms of the cost reduction of the biocomposites themselves, as mainly the waste from the wood industry was used as a low-cost filler, but also that the additive delays the aging process occurring during UV light exposure. Even a small, 2 wt.% addition of some of the tested forms of cellulose delayed surface degradation, which is one of the most important factors affecting the biodegradation process.

Cellulosic Textiles-An Appealing Trend for Different Pharmaceutical Applications

Cellulose, the most abundant biopolymer in nature, is derived from various sources. The production of pharmaceutical textiles based on cellulose represents a growing sector. In medicated textiles, textile and pharmaceutical sciences are integrated to develop new healthcare approaches aiming to improve patient compliance. Through the possibility of cellulose functionalization, pharmaceutical textiles can broaden the applications of cellulose in the biomedical field. This narrative review aims to illustrate both the methods of extraction and preparation of cellulose fibers, with a particular focus on nanocellulose, and diverse pharmaceutical applications like tissue restoration and antimicrobial, antiviral, and wound healing applications. Additionally, the merging between fabricated cellulosic textiles with drugs, metal nanoparticles, and plant-derived and synthetic materials are also illustrated. Moreover, new emerging technologies and the use of smart medicated textiles (3D and 4D cellulosic textiles) are not far from those within the review scope. In each section, the review outlines some of the limitations in the use of cellulose textiles, indicating scientific research that provides significant contributions to overcome them. This review also points out the faced challenges and possible solutions in a trial to present an overview on all issues related to the use of cellulose for the production of pharmaceutical textiles.

Sustainable formulation polymers for home, beauty and personal care: challenges and opportunities

As society moves towards a net-zero future, the need to adopt more sustainable polymers is well understood, and as well as plastics, less visible formulation polymers should also be included within this shift. As researchers, industries and consumers move towards more sustainable products there is a clear need to define what sustainability means in fast moving consumer goods and how it can be considered at the design stage. In this perspective key challenges in achieving sustainable formulation polymers are highlighted, and opportunities to overcome them are presented.

Effect of degree of substitution on the microphase separation and mechanical properties of cellooligosaccharide acetate-based elastomers

Thermoplastic elastomers (TPEs) have long been used in a wide range of industries. However, most existing TPEs are petroleum-derived polymers. To realize environmentally benign alternatives to conventional TPEs, cellulose acetate is a promising TPE hard segment because of its sufficient mechanical properties, availability from renewable sources, and biodegradability in natural environments. Because the degree of substitution (DS) of cellulose acetate governs a range of physical properties, it is a useful parameter for designing novel cellulose acetate-based TPEs. In this study, we synthesized cellulose acetate-based ABA-type triblock copolymers (AcCel_x-b-PDL-b-AcCel_x) containing a celloologosaccharide acetate hard A segment (AcCel_x, where x is the DS; x = 3.0, 2.6, and 2.3) and a poly(δ-decanolactone) (PDL) soft B segment. Small-angle X-ray scattering showed that decreasing the DS of AcCel_x-b-PDL-b-AcCel_x resulted in the formation of a more ordered microphase-separated structure. Owing to the microphase separation of the hard cellulosic and soft PDL segments, all the AcCel_x-b-PDL-b-AcCel_x samples exhibited elastomer-like properties. Moreover, the decrease in DS improved toughness and suppressed stress relaxation. Furthermore, preliminary biodegradation tests in an aqueous environment revealed that the decrease in DS endowed AcCel_x-b-PDL-b-AcCel_x with greater biodegradability potential. This work demonstrates the usefulness of cellulose acetate-based TPEs as next-generation sustainable materials.

Effect of cellulose materials on the mechanochemical-assisted reaction system with oleic acid

As the most abundant natural polymer in nature, cellulose has become the promising alternative raw material to replace fossil-based polymer. Owing to the presence of innumerable hydroxyl groups, various approaches are employed to render processability of cellulose. Herein, a sustainable esterification strategy, mechanochemical-assisted esterification, was developed to produce cellulose oleate (CO) with only a small amount of solvent. The differences in reactivity between all types of cellulose were elucidated. According to thermal stability analysis, the degradation temperature decreased after modification due to the substitution of the long oleoyl group. High degree of substitution (DS) of CO also possessed glass transition temperature (Tg) based on differential scanning calorimetry (DSC) analysis. Herewith, the processability of cellulose was introduced after modification. In this study, bamboo waste cellulose nanofiber oleate (BW CNF-OA) showed the highest DS (2.28) among the COs. Its higher surface reactivity due to the high surface aspect ratio led to a higher quantity of fatty acids attached to the cellulose. For the mechanical properties, low DS of COs exhibited higher tensile strength values. In a nutshell, this greener approach is more favorable than conventional chemical esterification in terms of reduced solvent dosage and improved sustainability.

Development of cellulose/hydroxyapatite/TiO2 scaffolds for efficient removal of lead (II) ions pollution: Characterization, kinetic analysis, and artificial neural network modeling

The utilization of nano-biodegradable composites for removing pollutants and heavy metals in aquatic environments has been widespread. This study focuses on synthesizing cellulose/hydroxyapatite nanocomposites with titanium dioxide (TiO2) via the freeze-drying method for the adsorption of lead ions in aquatic environments. The physical and chemical properties of the nanocomposites, including structure, morphology, and mechanical properties, were analyzed through FTIR, XRD, SEM, and EDS. In addition, parameters affecting the adsorption capacity, such as time, temperature, pH, and initial concentration, were determined. The nanocomposite exhibited a maximum adsorption capacity of 1012 mg⸱g-1, and the second-order kinetic model was found to govern the adsorption process. Additionally, an artificial neural network (ANN) was created using weight percentages (wt%) of nanoparticles included in the scaffold to predict the mechanical behavior, porosity, and desorption of the scaffolds at various weight percentages of hydroxyapatite (nHAP) and TiO2. The results of the ANN indicated that the incorporation of both single and hybrid nanoparticles into the scaffolds improved their mechanical behavior and desorption, as well as increased their porosity.

Influence of Weathering on the Degradation of Cellulose Acetate Microplastics Obtained from Used Cigarette Butts

Cellulose acetate is used in many applications, including for cigarette filters. Unfortunately, unlike cellulose, its (bio)degradability is under question, yet it often ends up uncontrolled in the natural environment. The main purpose of this study is to compare the effects of weathering on two types of cigarette filter (classic filters and newer filters that have more recently arrived on the market) following their use and disposal in nature. Microplastics were prepared from polymer parts of used (classic and heated tobacco products-HTP) cigarettes and artificially aged. TG/DTA, FTIR, and SEM analyses were performed both before and after the aging process. Newer tobacco products contain an additional film made of a poly(lactic acid) polymer which, like cellulose acetate, burdens the environment and poses a risk to the ecosystem. Numerous studies have been conducted on the disposal and recycling of cigarette butts and cigarette butt extracts, revealing alarming data that have also influenced the decisions of the EU, who addressed the disposal of tobacco products in the EU Directive (EU) 2019/904. Despite this, there is still no systematic analysis in the literature evaluating the impact of weathering (i.e., accelerated aging) on the degradation of cellulose acetate in classic cigarettes compared with that in newer tobacco products that have recently appeared on the market. This is of particular interest given that the latter have been promoted as being healthier and environmentally friendly. The results show that in cellulose acetate cigarette filters the particle size decreased after accelerated aging. Also, the thermal analysis revealed differences in the behavior of the aged samples, while the FTIR spectra showed no shifts in the position of the peaks. Organic substances break down under UV light, which can be seen by measuring the color change. The PLA film was found to be more stable than cellulose acetate under the influence of UV light.

Melt Processible Biodegradable Blends of Polyethylene Glycol Plasticized Cellulose Diacetate with Polylactic Acid and Polybutylene Adipate-Co-Terephthalate

Enhancing the melt processability of cellulose is key to broadening its applications. This is done via derivatization of cellulose, and subsequent plasticization and/or blending with other biopolymers, such as polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT). However, derivatization of cellulose tends to reduce its biodegradability. Moreover, traditional plasticizers are non-biodegradable. In this study, we report the influence of polyethylene glycol (PEG) plasticizer on the melt processibility and biodegradability of cellulose diacetate (CD) and its blends with PLA and PBAT. CD was first plasticized with PEG (PEG-200) at 35 wt%, and then blended with PLA and PBAT using a twin-screw extruder. Blends of the PEG plasticized CD with PLA at 40 wt% and with PBAT at 60 wt% were studied in detail. Dynamic mechanical analysis (DMA) showed that PEG reduced the glass transition of the CD from ca. 220 °C to less than 100 °C, indicating effective plasticization. Scanning electron microscopy revealed that the CD/PEG-PBAT blend had a smoother morphology implying some miscibility. The CD/PEG-PBAT blend at 60 wt% PBAT had an elongation-to-break of 734%, whereas the CD/PEG-PLA blend had a tensile strength of 20.6 MPa, comparable to that of the PEG plasticized CD. After a 108-day incubation period under simulated aerobic composting, the CD/PEG-PBAT blend at 60 wt% PBAT exhibited a biodegradation of 41%, whereas that of the CD/PEG-PLA at 40 wt% PLA was 107%. This study showed that melt processible, biodegradable CD blends can be synthesized through plasticization with PEG and blending with PBAT or PLA.

Composition mapping of highly substituted cellulose-ether monomers by liquid chromatography-mass spectrometry and probability-based data deconvolution

Cellulose ethers (CEs) are semi-synthetic polymers produced by derivatization of natural cellulose, yielding highly substituted products such as ethyl hydroxyethyl cellulose (EHEC) or methyl ethyl hydroxyethyl cellulose (MEHEC). CEs are commonly applied as pharmaceutical excipients and thickening agents in paints and drymix mortars. CE properties, such as high viscosity in solution, solubility, and bio-stability are of high interest to achieve required product qualities, which may be strongly affected by the substitution pattern obtained after derivatization. The average and molar degree of substitution often cannot explain functional differences observed among CE batches, and more in-depth analysis is needed. In this work, a new method was developed for the comprehensive mapping of the substitution degree and composition of β-glucose monomers of CE samples. To this end, CEs were acid-hydrolyzed and then analyzed by gradient reversed-phase liquid chromatography-mass spectrometry (LC-MS) using an acid-stable LC column and time-of-flight (TOF) mass spectrometer. LC-MS provided monomer resolution based on ethylene oxide, hydroxyl, and terminating methyl/ethyl content, allowing the assignment of detailed compositional distributions. An essential further distinction of constitutional isomer distributions was achieved using an in-house developed probability-based deconvolution algorithm. Aided by differential heat maps for visualization and straightforward interpretation of the measured LC-MS data, compositional variation between bio-stable and non-bio-stable CEs could be identified using this new approach. Moreover, it disclosed unexpected methylations in EHEC samples. Overall, the obtained molecular information on relevant CE samples demonstrated the method's potential for the study of CE structure-property relationships.

Advanced cellulose nanocrystals (CNC) and cellulose nanofibrils (CNF) aerogels: Bottom-up assembly perspective for production of adsorbents

The most common and abundant polymer in nature is the linear polysaccharide cellulose, but processing it requires a new approach since cellulose degrades before melting and does not dissolve in ordinary organic solvents. Cellulose aerogels are exceptionally porous (>90 %), have a high specific surface area, and have low bulk density (0.0085 mg/cm³), making them suitable for a variety of sophisticated applications including but not limited to adsorbents. The production of materials with different qualities from the nanocellulose based aerogels is possible thanks to the ease with which other chemicals may be included into the structure of nanocellulose based aerogels; despite processing challenges, cellulose can nevertheless be formed into useful, value-added products using a variety of traditional and cutting-edge techniques. To improve the adsorption of these aerogels, rheology, 3-D printing, surface modification, employment of metal organic frameworks, freezing temperature, and freeze casting techniques were all investigated and included. In addition to exploring venues for creation of aerogels, their integration with CNC liquid crystal formation were also explored and examined to pursue "smart adsorbent aerogels". The objective of this endeavour is to provide a concise and in-depth evaluation of recent findings about the conception and understanding of nanocellulose aerogel employing a variety of technologies and examination of intricacies involved in enhancing adsorption properties of these aerogels.