X-ray Visible and Uniform Alginate Microspheres Loaded with in Situ Synthesized BaSO4 Nanoparticles for in Vivo Transcatheter Arterial Embolization

Insights on updates in sodium alginate/MXenes composites as the designer matrix for various applications: A review

Advancements in two-dimensional materials, particularly MXenes, have spurred the development of innovative composites through their integration with natural polymers such as sodium alginate (SA). Mxenes exhibit a broad specific surface area, excellent electrical conductivity, and an abundance of surface terminations, which can be combined with SA to maximize the synergistic effect of the materials. This article provides a comprehensive review of state-of-the-art techniques in the fabrication of SA/MXene composites, analyzing the resulting structural and functional enhancements with a specific focus on advancing the design of these composites for practical applications. A detailed exploration of SA/MXene composites is provided, highlighting their utility in various sectors, such as wearable electronics, wastewater treatment, biomedical applications, and electromagnetic interference (EMI) shielding. The review identifies the unique advantages conferred by incorporating MXene in these composites, examines the current challenges, and proposes future research directions to understand and optimize these promising materials thoroughly. The remarkable properties of MXenes are emphasized as crucial for advancing the performance of SA-based composites, indicating significant potential for developing high-performance composite materials.

Controllable synthesis of barium carbonate nano- and microparticles for SPECT and CT imaging

The design and synthesis of nano- and microcarriers for preclinical and clinical imaging are highly attractive due to their unique features, for example, multimodal properties. However, broad translation of these carriers into clinical practice is postponed due to the unknown biological reactivity of the new components used for their synthesis. Here, we have developed microcarriers (∼2-3 μm) and  nanocarriers (<200 nm) made of barium carbonate (BaCO3) for multiple imaging applications in vivo. In general, barium in the developed carriers can be used for X-ray computed tomography, and the introduction of a diagnostic isotope (99mTc) into the BaCO3 structure enables in vivo visualization using single-photon emission computed tomography. The bioimaging has shown that the radiolabeled BaCO3 nano- and microcarriers had different biodistribution profiles and tumor accumulation efficiencies after intratumoral and intravenous injections. In particular, in the case of intratumoral injection, all the types of used carriers mostly remained in the tumors (>97%). For intravenous injection, BaCO3 microcarriers were mainly localized in the lung tissues. However, BaCO3 NPs were mainly accumulated in the liver. These results were supported by ex vivo fluorescence imaging, direct radiometry, and histological analysis. The BaCO3-based micro- and nanocarriers showed negligible in vivo toxicity towards major organs such as the heart, lungs, liver, kidneys, and spleen. This study provides a simple strategy for the design and fabrication of the BaCO3-based carriers for the development of dual bioimaging.

The Use of Microspheres for Cancer Embolization Therapy: Recent Advancements and Prospective

Embolization therapy involving biomaterials has improved the therapeutic strategy for most liver cancer treatments. Developing biomaterials as embolic agents has significantly improved patients' survival rates. Various embolic agents are present in liquid agents, foam, particulates, and particles. Some of the most applied embolic agents are microparticles, such as microspheres (3D micrometer-sized spherical particles). Microspheres with added functionalities are currently being developed for effective therapeutic embolization. Their excellent properties of high surface area and capacity for being loaded with radionuclides and alternate active or therapeutic agents provide an additional advantage to overcome limitations from traditional cancer treatments. Microspheres (non-radioactive and radioactive) have been widely used and explored for localized cancer treatment. Non-radioactive microspheres exhibit improved clinical performance as drug delivery vehicles in chemotherapy due to their controlled and sustained drug release to the target site. They offer better flow properties and are beneficial for the ease of delivery via injection procedures. In addition, radioactive microspheres have also been exploited for use as an embolic platform in internal radiotherapy as an alternative to cancer treatment. This short review summarizes the progressive development of non-radioactive and radioactive embolic microspheres, emphasizing material characteristics. The use of embolic microspheres for various modalities of therapeutic arterial embolization and their impact on therapeutic performance are also discussed.

Development and evaluation of polyacrylamide microspheres loaded with phloretin and tantalum for transcatheter arterial embolization

Transcatheter arterial embolization is an effective treatment for liver cancer. However, the development of novel embolic agents remains a challenge. In this study, we evaluated polyacrylic acid microspheres loaded with phloretin and tantalum as potential embolic agents for liver cancer treatment. Microspheres were synthesised via emulsion polymerisation and characterised in terms of size, shape, and drug-loading efficiency. Nanosized tantalum powder (0 to 15%) was added to the microspheres as an X-ray blocking agent. The maximum drug-loading capacity of the microspheres was approximately 20 mg g-1. The phloretin-loaded microspheres showed a sustained drug release profile in vitro. The microspheres were also evaluated for their in vivo anticancer efficacy in a rabbit VX2 liver tumour model. In conclusion, polyacrylic acid microspheres loaded with phloretin and tantalum have great potential as novel embolic agents for transcatheter arterial embolization for liver cancer treatment.

Preparation of thrombin-loaded calcium alginate microspheres with dual-mode imaging and study on their embolic properties in vivo

Transcatheter arterial embolization (TAE) has played a huge role in the interventional treatment of organ bleeding and accidental bleeding. Choosing bio-embolization materials with good biocompatibility is an important part of TAE. In this work, we prepared a calcium alginate embolic microsphere using high-voltage electrostatic droplet technology. The microsphere simultaneously encapsulated silver sulfide quantum dots (Ag2S QDs) and barium sulfate (BaSO4), and fixed thrombin on its surface. Thrombin can achieve an embolic effect while stopping bleeding. The embolic microsphere has good near-infrared two-zone (NIR-II) imaging and X-ray imaging effects, and the luminous effect of NIR-II is better than that of X-rays. This breaks the limitations of traditional embolic microspheres that only have X-ray imaging. And the microspheres have good biocompatibility and blood compatibility. Preliminary application results show that the microspheres can achieve a good embolization effect in the ear arteries of New Zealand white rabbits, and can be used as an effective material for arterial embolization and hemostasis. This work realizes the clinical embolization application of NIR-II combined with X-ray multimodal imaging technology in biomedical imaging, achieving complementary advantages and excellent results, more suitable for studying biological changes and clinical applications.

Microfluidic Controllable Preparation of Iodine-131-Labeled Microspheres for Radioembolization Therapy of Liver Tumors

Transcatheter arterial radioembolization (TARE) is of great significance for the treatment of advanced hepatocellular carcinoma (HCC). However, the existing radioembolic microspheres still have problems such as non-degradability, non-uniform size, and inability to directly monitor in vivo, which hinders the development of TARE. In this paper, a novel radioembolic agent, 131 I-labeled methacrylated gelatin microspheres (131 I-GMs), is prepared for the treatment of HCC. Water-in-oil (W/O) emulsion templates are prepared by a simple one-step microfluidic method to obtain methacrylated gelatin microspheres (GMs) after UV irradiation. A series of GMs with uniform and controllable size is obtained by adjusting the flow rate of each fluid. Both air-dried and freeze-dried GMs can quickly restore their original shape and size, and still have good monodispersity, elasticity, and biocompatibility. The radiolabeling experiments show that 131 I can efficiently bind to GMs by chloramine-T method, and the obtained 131 I-GMs have good radioactive stability in vitro. The results of in vivo TARE treatment in rats show that 131 I-GMs can be well retained in the hepatic artery and have a good inhibitory effect on the progression of liver cancer, showing the potential for the treatment of HCC.

Microfluidic fabrication of X-ray-visible sodium hyaluronate microspheres for embolization

Catheter embolization is a minimally invasive technique that relies on embolic agents and is now widely used to treat various high-prevalence medical diseases. Embolic agents usually need to be combined with exogenous contrasts to visualize the embolotherapy process. However, the exogenous contrasts are quite simply washed away by blood flow, making it impossible to monitor the embolized location. To solve this problem, a series of sodium hyaluronate (SH) loaded with bismuth sulfide (Bi₂S₃) nanorods (NRs) microspheres (Bi₂S₃@SH) were prepared in this study by using 1,4-butaneglycol diglycidyl ether (BDDE) as a crosslinker through single-step microfluidics. Bi₂S₃@SH-1 microspheres showed the best performance among other prepared microspheres. The fabricated microspheres had uniform size and good dispersibility. Furthermore, the introduction of Bi₂S₃ NRs synthesized by a hydrothermal method as Computed Tomography (CT) contrast agents improved the mechanical properties of Bi₂S₃@SH-1 microspheres and endowed the microspheres with excellent X-ray impermeability. The blood compatibility and cytotoxicity test showed that the Bi₂S₃@SH-1 microspheres had good biocompatibility. In particular, the in vitro simulated embolization experiment results indicate that the Bi₂S₃@SH-1 microspheres had excellent embolization effect, especially for the small-sized blood vessels of 500-300 and 300 μm. The results showed the prepared Bi₂S₃@SH-1 microspheres have good biocompatibility and mechanical properties, as well as certain X-ray visibility and excellent embolization effects. We believe that the design and combination of this material has good guiding significance in the field of embolotherapy.

Multifunctional nanoplatforms application in the transcatheter chemoembolization against hepatocellular carcinoma

Hepatocellular carcinoma (HCC) has the sixth-highest new incidence and fourth-highest mortality worldwide. Transarterial chemoembolization (TACE) is one of the primary treatment strategies for unresectable HCC. However, the therapeutic effect is still unsatisfactory due to the insufficient distribution of antineoplastic drugs in tumor tissues and the worsened post-embolization tumor microenvironment (TME, e.g., hypoxia and reduced pH). Recently, using nanomaterials as a drug delivery platform for TACE therapy of HCC has been a research hotspot. With the development of nanotechnology, multifunctional nanoplatforms have been developed to embolize the tumor vasculature, creating conditions for improving the distribution and bioavailability of drugs in tumor tissues. Currently, the researchers are focusing on functionalizing nanomaterials to achieve high drug loading efficacy, thorough vascular embolization, tumor targeting, controlled sustained release of drugs, and real-time imaging in the TACE process to facilitate precise embolization and enable therapeutic procedures follow-up imaging of tumor lesions. Herein, we summarized the recent advances and applications of functionalized nanomaterials based on TACE against HCC, believing that developing these functionalized nanoplatforms may be a promising approach for improving the TACE therapeutic effect of HCC.

Designable microfluidic ladder networks from backstepping microflow analysis for mass production of monodisperse microdroplets

Controllable mass production of monodisperse droplets plays a key role in numerous fields ranging from scientific research to industrial application. Microfluidic ladder networks show great potential in mass production of monodisperse droplets, but their design with uniform microflow distribution remains challenging due to the lack of a rational design strategy. Here an effective design strategy based on backstepping microflow analysis (BMA) is proposed for the rational development of microfluidic ladder networks for mass production of controllable monodisperse microdroplets. The performance of our BMA rule for rational microfluidic ladder network design is demonstrated by using an existing analogism-derived rule that is widely used for the design of microfluidic ladder networks as the control group. The microfluidic ladder network designed by the BMA rule shows a more uniform flow distribution in each branch microchannel than that designed by the existing rule, as confirmed by single-phase flow simulation. Meanwhile, the microfluidic ladder network designed by the BMA rule allows mass production of droplets with higher size monodispersity in a wider window of flow rates and mass production of polymeric microspheres from such highly monodisperse droplet templates. The proposed BMA rule provides new insights into the microflow distribution behaviors in microfluidic ladder networks based on backstepping microflow analysis and provides a rational guideline for the efficient development of microfluidic ladder networks with uniform flow distribution for mass production of highly monodisperse droplets. Moreover, the BMA method provides a general analysis strategy for microfluidic networks with parallel multiple microchannels for rational scale-up.

Emerging Polymer Materials in Trackable Endovascular Embolization and Cell Delivery: From Hype to Hope

Minimally invasive endovascular embolization is a widely used clinical technique used for the occlusion of blood vessels to treat various diseases. Different occlusive agents ranging from gelatin foam to synthetic polymers such as poly(vinyl alcohol) (PVA) have been commercially used for embolization. However, these agents have some drawbacks, such as undesired toxicity and unintended and uncontrolled occlusion. To overcome these issues, several polymer-based embolic systems are under investigation including biocompatible and biodegradable microspheres, gelling liquid embolic with controlled occlusive features, and trackable microspheres with enhanced safety profiles. This review aims to summarize recent advances in current and emerging polymeric materials as embolization agents with varying material architectures. Furthermore, this review also explores the potential of combining injectable embolic agents and cell therapy to achieve more effective embolization with the promise of outstanding results in treating various devastating diseases. Finally, limitations and challenges in developing next-generation multifunctional embolic agents are discussed to promote advancement in this emerging field.

Shape-Anisotropic Microembolics Generated by Microfluidic Synthesis for Transarterial Embolization Treatment

Particulate embolic agents with calibrated sizes, which employ interventional procedures to achieve endovascular embolization, have recently attracted tremendous interest in therapeutic embolotherapies for a wide plethora of diseases. However, the particulate shape effect, which may play a critical role in embolization performances, has been rarely investigated. Here, polyvinyl alcohol (PVA)-based shape-anisotropic microembolics are developed using a facile droplet-based microfluidic fabrication method via heat-accelerated PVA-glutaraldehyde crosslinking reaction at a mild temperature of 38 ^° C. Precise geometrical controls of the microembolics are achieved with a nearly capsule shape through regulating surfactant concentration and flow rate ratio between dispersed phase and continuous phase in the microfluidics. Two specific models are employed, i.e., in vitro decellularized rabbit liver embolization model and in vivo rabbit ear embolization model, to systematically evaluate the embolization behaviors of the nonspherical microembolics. Compared to microspheres of the same volume, the elongated microembolics demonstrated advantageous endovascular navigation capability, penetration depth and embolization stability due to their comparatively smaller radial diameter and their central cylindrical part providing larger contact area with distal vessels. Such nonspherical microembolics present a promising platform to apply shape anisotropy to achieve distinctive therapeutic effects for endovascular treatments.

Recent advances and applications of microspheres and nanoparticles in transarterial chemoembolization for hepatocellular carcinoma

Transarterial chemoembolization (TACE) is a recommended treatment for patients suffering from intermediate and advanced hepatocellular carcinoma (HCC). As compared to the conventional TACE, drug-eluting bead TACE demonstrates several advantages in terms of survival, treatment response, and adverse effects. The selection of embolic agents is critical to the success of TACE. Many studies have been performed on the modification of the structure, size, homogeneity, biocompatibility, and biodegradability of embolic agents. Continuing efforts are focused on efficient loading of versatile chemotherapeutics, controlled sizes for sufficient occlusion, real-time detection intra- and post-procedure, and multimodality imaging-guided precise treatment. Here, we summarize recent advances and applications of microspheres and nanoparticles in TACE for HCC. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

A Simple and Efficient Embolization-Combined Therapy for Solid Tumors by Smart Poly(amino acid)s Nanocomposites

Interventional embolization and minimally invasive thermal ablation are common clinical methods for treatment of unresectable solid tumors, but they both have many insurmountable disadvantages. Inspired by pH-responsive drug delivery systems, we report the tumor microenvironment-gelled nanocomposites with poly[(l-glutamic acid-ran-l-tyrosine)-b-l-threonine-b-l-cysteine]s (PGTTCs) coating nanoparticles (NPs, Au or Fe₃O₄) for noninterventional targeted embolization combined with noninvasive thermal ablation therapy of solid tumors by intravenous injection without catheter use. The results of the animal trial in vivo with tumor-bearing mice and rabbits showed superior targeted embolization and therapy and fluorescence/single-photon emission computed tomography/magnetic resonance multimodal imaging effects. Tumors treated with NPs@PGTTCs were shrunken and necrotized within 30 days, the long-term survival rate was more than 80%, and the same effects can be achieved within 15 days when combined with thermal ablation. The method is so simple and efficient for many hard-to-treat tumors within an acidic microenvironment, which is not only a great improvement and innovation in tumor theranostics but also an important development in nanomedicine.

Microfluidic Applications in Drug Development: Fabrication of Drug Carriers and Drug Toxicity Screening

Microfluidic technology has been highly useful in nanovolume sample preparation, separation, synthesis, purification, detection and assay, which are advantageous in drug development. This review highlights the recent developments and trends in microfluidic applications in two areas of drug development. First, we focus on how microfluidics has been developed as a facile tool for the fabrication of drug carriers including microparticles and nanoparticles. Second, we discuss how microfluidic chips could be used as an independent platform or integrated with other technologies in drug toxicity screening. Challenges and future perspectives of microfluidic applications in drug development have also been provided considering the present technological limitations.

The sodium hyaluronate microspheres fabricated by solution drying for transcatheter arterial embolization

Transcatheter arterial embolization (TAE) is an effective therapeutic method for several clinical ailments. Interminably, the polymer microsphere is reflected as one of the idyllic embolic materials due to the exceptional...

Smart-Polypeptide-Coated Mesoporous Fe3O4 Nanoparticles: Non-Interventional Target-Embolization/Thermal Ablation and Multimodal Imaging Combination Theranostics for Solid Tumors

Tumor theranostics hold great potential for personalized medicine in the future, and transcatheter arterial embolization (TAE) is an important clinical treatment for unresectable or hypervascular tumors. In order to break the limitation, simplify the procedure of TAE, and achieve ideal combinatorial theranostic capability, here, a kind of triblock-polypeptide-coated perfluoropentane-loaded mesoporous Fe₃O₄ nanocomposites (PFP-m-Fe₃O₄@PGTTCs) were prepared for non-interventional target-embolization, magnetic hyperthermia, and multimodal imaging combination theranostics of solid tumors. The results of systematic animal experiments by H22-tumor-bearing mice and VX2-tumor-bearing rabbits in vivo indicated that PFP-m-Fe₃O₄@PGTTC-6.3 has specific tumor accumulation and embolization effects. The tumors' growth has been inhibited and the tumors disappeared 4 weeks and ≤15 days post-injection with embolization and magnetic hyperthermia combination therapy, respectively. The results also showed an excellent effect of magnetic resonance/ultrasound/SPECT multimodal imaging. This pH-responsive non-interventional embolization combinatorial theranostics system provides a novel embolization and multifunctional theranostic candidate for solid tumors.

Microfluidic fabrication of imageable and resorbable polyethylene glycol microspheres for catheter embolization

Radiopaque and degradable hydrogel microspheres have a range of potential uses in medicine including proper placement of embolic material during occlusion procedures, acting as inherently embolic materials, and serving as drug carriers that can be located after injection. Current methods for creating radiopaque microspheres are either unable to fully and homogeneously incorporate radiopaque material throughout the microspheres for optimal imaging capabilities, do not result in degradable or fully compressible microspheres, or require elaborate, time-consuming preparation. We used a simple one-step microfluidic method to fabricate imageable, degradable polyethylene glycol (PEG) microspheres of varying sizes with homogenous dispersion of barium sulfate-a biocompatible, high-radiopacity contrast agent. The imageability of the microspheres was characterized using optical microscopy and microcomputed tomography as a function of barium sulfate loading. Microspheres with 20% wt/vol barium sulfate had a mean CT attenuation value of 1,510 HU, similar to that of cortical bone, which should enable visualization with soft tissue. Compared with unloaded microspheres, barium sulfate-loaded ones saw an increase in gelation and degradation times and storage modulus and decrease in swelling. Imageable microspheres retained compressibility and were injectable via catheter. The developed radiopaque, degradable PEG microspheres have various potential uses for interventional radiologists and imaging laboratories.

Magnetic liquid metal loaded nano-in-micro spheres as fully flexible theranostic agents for SMART embolization

Transcatheter arterial chemoembolization (TACE) has become one of the preferred choices for advanced liver cancer patients. Current clinically used microsphere embolic agents, such as PVA, gelatin, and alginate microspheres, have limited therapeutic efficacy and lack the function of real-time imaging. In this work, we fabricated magnetic liquid metal nanoparticle (Fe@EGaIn NP) loaded calcium alginate (CA) microspheres (denoted as Fe@EGaIn/CA microspheres), which integrate CT/MR dual-modality imaging and photothermal/photodynamic functions of the Fe@EGaIn NP core, as well as embolization and drug-loading functions of CA microspheres. Namely, such nano-in-micro spheres can be used as fully flexible theranostic agents to achieve smart-chemoembolization. It has been confirmed by in vitro and in vivo experiments that Fe@EGaIn/CA microspheres have advantageous morphology, favorable biocompatibility, splendid versatility, and advanced embolic efficacy. Benefiting from these properties, excellent therapeutic efficiency was achieved with a tumor growth-inhibiting value of 100% in tumor-bearing rabbits. As a novel microsphere embolic agent with promising therapeutic efficacy and diagnostic capability, Fe@EGaIn/CA microspheres have shown potential applications in clinical transcatheter arterial chemoembolization. And the preparation strategy presented here provides a generalized paradigm for achieving multifunctional and fully flexible theranostics.

Alginate microgels as delivery vehicles for cell-based therapies in tissue engineering and regenerative medicine

Conventional stem cell delivery typically utilize administration of directly injection of allogenic cells or domesticated autogenic cells. It may lead to immune clearance of these cells by the host immune systems. Alginate microgels have been demonstrated to improve the survival of encapsulated cells and overcome rapid immune clearance after transplantation. Moreover, alginate microgels can serve as three-dimensional extracellular matrix to support cell growth and protect allogenic cells from rapid immune clearance, with functions as delivery vehicles to achieve sustained release of therapeutic proteins and growth factors from the encapsulated cells. Besides, cell-loaded alginate microgels can potentially be applied in regenerative medicine by serving as injectable engineered scaffolds to support tissue regrowth. In this review, the properties of alginate and different methods to produce alginate microgels are introduced firstly. Then, we focus on diverse applications of alginate microgels for cell delivery in tissue engineering and regenerative medicine.

Immobilized thrombin on X-ray radiopaque polyvinyl alcohol/chitosan embolic microspheres for precise localization and topical blood coagulation

Trans-catheter arterial embolization (TAE) plays an important role in treating various diseases. The available embolic agents lack X-ray visibility and do not prevent the reflux phenomenon, thus hindering their application for TAE therapy. Herein, we aim to develop a multifunctional embolic agent that combines the X-ray radiopacity with local procoagulant activity. The barium sulfate nanoparticles (BaSO₄ NPs) were synthesized and loaded into the polyvinyl alcohol/chitosan (PVA/CS) to prepare the radiopaque BaSO₄/PVA/CS microspheres (MS). Thereafter, thrombin was immobilized onto the BaSO₄/PVA/CS MS to obtain the thrombin@BaSO₄/PVA/CS MS. The prepared BaSO₄/PVA/CS MS were highly spherical with diameters ranging from 100 to 300 μm. In vitro CT imaging showed increased X-ray visibility of BaSO₄/PVA/CS MS with the increased content of BaSO₄ NPs in the PVA/CS MS. The biocompatibility assessments demonstrated that the MS were non-cytotoxic and possessed permissible hemolysis rate. The biofunctionalized thrombin@BaSO₄/PVA/CS MS showed improved hemostatic capacity and facilitated hemostasis in vitro. Additionally, in vivo study performed on a rabbit ear embolization model confirmed the excellent X-ray radiopaque stability of the BaSO₄/PVA/CS MS. Moreover, both the BaSO₄/PVA/CS and thrombin@BaSO₄/PVA/CS MS achieved superior embolization effects with progressive ischemic necrosis on the ear tissue and induced prominent ultrastructural changes in the endothelial cells. The findings of this study suggest that the developed MS could act as a radiopaque and hemostatic embolic agent to improve the embolization efficiency.

•

Excellent in vitro and in vivo visibility of BaSO₄/PVA/CS MS.

•

Excellent cytocompatibility and hemocompatibility of BaSO₄/PVA/CS MS.

•

Enhanced hemostatic capacity and hemostasis of thrombin@BaSO₄/PVA/CS MS.

•

Potential application of thrombin@BaSO₄/PVA/CS MS for in vivo embolization.

Tumor Noninvasive and Target Embolization Therapy Platform by Intravenous Injection Based on Acidic Microenvironment-Responsive Hyperbranched Poly(amino acid)s

Transcatheter arterial embolization (TAE) has been widely applied in treatments of unresectable or hypervascular tumors, but the procedure of TAE is complicated possibly brings inherent risks. Here, inspired by pH-responsive drug delivery systems, a new method of noninvasive and target embolization therapy by intravenous injection was developed. This method is based on a type of acidic microenvironment-responsive hyperbranched poly(amino acid) (HPTTG) to avoid using catheterization and real-time image guidance angiography, simplifying the procedure, elevating compliance and general applicability of embolization therapy. The pH value of the sol-to-gel phase transition with decreasing pH of HPTTG was controlled by adjusting the ratio of acidic amino acids in copolymers. The results of the tumor-bearing animal experiment indicate that the HPTTG have an excellent target and embolic ability; they accumulate the most at the tumor site in 8 h postinjection. Blood vessels of the tumors were occluded, and the tumors were inhibited and necrotized in about 20 days. Therefore, it is expected that HPTTG not only can be used as novel embolic materials for efficient noninvasive embolization therapy of many solid tumors but also can be used as a multifunctional platform for combined theranostics, for example, combination with controlled release, thermal ablation, multimodal imaging, synergistic therapy, etc.

Chemical Modifications of Porous Shape Memory Polymers for Enhanced X-ray and MRI Visibility

The goal of this work was to develop a shape memory polymer (SMP) foam with visibility under both X-ray and magnetic resonance imaging (MRI) modalities. A porous polymeric material with these properties is desirable in medical device development for applications requiring thermoresponsive tissue scaffolds with clinical imaging capabilities. Dual modality visibility was achieved by chemically incorporating monomers with X-ray visible iodine-motifs and MRI visible monomers with gadolinium content. Physical and thermomechanical characterization showed the effect of increased gadopentetic acid (GPA) on shape memory behavior. Multiple compositions showed brightening effects in pilot, T1-weighted MR imaging. There was a correlation between the polymeric density and X-ray visibility on expanded and compressed SMP foams. Additionally, extractions and indirect cytocompatibility studies were performed to address toxicity concerns of gadolinium-based contrast agents (GBCAs). This material platform has the potential to be used in a variety of medical devices.

Microfluidic-prepared, monodisperse, X-ray-visible, embolic microspheres for non-oncological embolization applications

Embolotherapy using particle embolics is normally performed with exogenous contrast to assist in visualization. However, the exact location of the embolics cannot be identified after contrast washout. We developed a novel, pseudo-check valve-integrated microfluidic device, that partitions barium- impregnated alginate from crosslinking solution, thereby preventing nozzle failure. This enables rapid and continuous generation of inherently X-ray-visible embolic microspheres (XEMs) with uniform size. The XEMs are visible under clinical X-ray and cone beam CT both in vitro and in vivo. In particular, we demonstrated the embolization properties of these XEMs in large animals, performing direct intra- and post-procedural assessment of embolic delivery. The persistent radiopacity of these XEMs enables real-time evaluation of embolization precision and offers great promise for non-invasive follow-up examination without exogenous contrast. We also demonstrated that bariatric arterial embolization with XEMs significantly suppresses weight gain in swine, as an example of a non-oncological application of embolotherapy.

Bioprinting of radiopaque constructs for tissue engineering and understanding degradation behavior by use of Micro-CT

Bioprinting has emerged as a potential technique to fabricate tissue engineering constructs and in vitro models directly using living cells as a raw material for fabrication, conforming to the heterogeneity and architectural complexity of the tissues. In several of tissue engineering and in vitro disease modelling or surgical planning applications, it is desirable to have radiopaque constructs for monitoring and evaluation. In the present work, enhanced radiopaque constructs are generated by substituting Calcium ions with Barium ions for crosslinking of alginate hydrogels. The constructs are characterized for their structural integrity and followed by cell culture studies to evaluate their biocompatibility. This was followed by the radiopacity evaluation. The radiological images obtained by micro-CT technique was further applied to investigate the degradation behavior of the scaffolds. In conclusion, it is observed that barium crosslinking can provide a convenient means to obtain radiopaque constructs with potential for multi-faceted applications.

Current Status of Alginate in Drug Delivery

Alginate is one of the natural polymers that are often used in drug- and protein-delivery systems. The use of alginate can provide several advantages including ease of preparation, biocompatibility, biodegradability, and nontoxicity. It can be applied to various routes of drug administration including targeted or localized drug-delivery systems. The development of alginates as a selected polymer in various delivery systems can be adjusted depending on the challenges that must be overcome by drug or proteins or the system itself. The increased effectiveness and safety of sodium alginate in the drug- or protein-delivery system are evidenced by changing the physicochemical characteristics of the drug or proteins. In this review, various routes of alginate-based drug or protein delivery, the effectivity of alginate in the stem cells, and cell encapsulation have been discussed. The recent advances in the in vivo alginate-based drug-delivery systems as well as their toxicities have also been reviewed.

Temperature sensitive hydrogel for preoperative treatment of renal carcinoma

Surgical resection has been suggested as an effective and first-line treatment of renal cell carcinoma (RCC). However, operation is quite difficult for the patients with stage of middle-late or hypervascularized tumors. Transarterial chemoembolization (TACE) plays an important role in decreasing the size of tumors before surgery. In this work, we prepared an injectable drug-delivery system of doxorubicin-loaded temperature sensitive hydrogel for transarterial chemoembolization in RCC. The sol-gel transition behavior and rheologic analysis showed that the doxorubicin-loaded temperature sensitive hydrogel had good temperature sensitivity. Then, The X-ray experiment of hydrogel showed excellent visibility under the digital subtraction angiography and computed tomography scans in vitro and in vivo. Moreover, the studies of embolization in beagle's right kidney showed good properties in embolizing of renal arteries. In TACE therapy studies of rabbit VX₂ renal tumors, angiography, computed tomography and histopathological analysis verified that TACE therapy of doxorubicin-loaded temperature sensitive hydrogel had excellent embolic efficiency as a result of repressing the tumor growth. This hydrogel could provide valuable option in the treatment of renal cell carcinoma before surgery.

Smart Nanotherapeutic Targeting of Tumor Vasculature

The past decades have witnessed the development of a field dedicated to targeting tumor vasculature for cancer therapy. In contrast to conventional chemotherapeutics that need to penetrate into tumor tissues for killing tumor cells, the agents targeting tumor vascular system have two major advantages: direct contact with vascular endothelial cells or the blood and less possibility to induce drug resistance because of high gene stability of endothelial cells. More specifically, various angiogenesis inhibitors (AIs) and vascular disrupting agents (VDAs) that block tumor blood supply to inhibit tumor progression, some of which have been applied clinically, have been described. However, off-target effects and high effective doses limit the utility of these formulations in cancer patients. Thus, new strategies with improved therapeutic efficacy and safety are needed for tumor vessel targeting therapy. With the burgeoning developments in nanotechnology, smart nanotherapeutics now offer unprecedented potential for targeting tumor vasculature. Based on specific structural and functional features of the tumor vasculature, a number of different nanoscale delivery systems have been proposed for cancer therapy. In this Account, we summarize several distinct strategies to modulate tumor vasculature with various smart nanotherapeutics for safe and effective tumor therapy developed by our research programs. Inspired by the blood coagulation cascade, we generated nanoparticle-mediated tumor vessel infarction strategies that selectively block tumor blood supply to starve the tumor to death. By specifically delivering thrombin loaded DNA nanorobots (Nanorobot-Th) into tumor vessels, an intratumoral thrombosis is triggered to induce vascular infarction and, ultimately, tumor necrosis. Mimicking the coagulation cascade, a smart polymeric nanogel achieves permanent and peripheral embolization of liver tumors. Considering the critical role of platelets in maintaining tumor vessel integrity, a hybrid (PLP-D-R) nanoparticle selectively depleting tumor-associated platelets (TAP) to boost tumor vessel permeability was developed for enhancing intratumoral drug accumulation. In addition, benefiting from a better understanding of the molecular and cellular underpinnings of vascular normalization, several tumor acidity responsive nanotherapeutics, encapsulating therapeutic peptides, and small interfering RNA were developed to correct the abnormal features of the tumor vasculature. This made the tumor vessels more efficient for drug delivery. While we are still exploring the mechanisms of action of these novel nanoformulations, we expect that the strategies summarized here will offer a promising platform to design effective next-generation nanotherapeutics against cancer and facilitate the clinical translation of smart nanotherapeutics that target tumor vasculature.

Advances in Biomaterials and Technologies for Vascular Embolization

Minimally invasive transcatheter embolization is a common nonsurgical procedure in interventional radiology used for the deliberate occlusion of blood vessels for the treatment of diseased or injured vasculature. A wide variety of embolic agents including metallic coils, calibrated microspheres, and liquids are available for clinical practice. Additionally, advances in biomaterials, such as shape-memory foams, biodegradable polymers, and in situ gelling solutions have led to the development of novel preclinical embolic agents. The aim here is to provide a comprehensive overview of current and emerging technologies in endovascular embolization with respect to devices, materials, mechanisms, and design guidelines. Limitations and challenges in embolic materials are also discussed to promote advancement in the field.

Multifunctional Photo- and Magnetoresponsive Graphene Oxide-Fe3O4 Nanocomposite-Alginate Hydrogel Platform for Ice Recrystallization Inhibition

Tuning ice recrystallization (IR) has attracted tremendous interest in fundamental research and a variety of practical applications, including food and pharmaceutical engineering, fabrication of anti-icing coating and porous materials, and cryopreservation of biological cells and tissues. Although great efforts have been devoted to modulation of IR for better microstructure control of various materials, it still remains a challenge, especially in cryopreservation, where insufficient suppression of IR during warming is fatal to the cells. Herein, we report an all-in-one platform, combining the external physical fields and the functional materials for both active and passive suppression of IR, where the photo- and magnetothermal dual-modal heating of GO-Fe₃O₄ nanocomposites (NCs) can be used to suppress IR with both enhanced global warming and microscale thermal disturbance. Moreover, the materials alginate hydrogels and GO-Fe₃O₄ NCs can act as IR inhibitors for further suppression of the IR effect. As a typical application, we show that this GO-Fe₃O₄ nanocomposite-alginate hydrogel platform can successfully enable low-cryoprotectant, high-quality vitrification of stem cell-laden hydrogels. We believe that the versatile ice recrystallization inhibition platform will have a profound influence on cryopreservation and tremendously facilitate stem cell-based medicine to meet its ever-increasing demand in clinical settings.

Rational design of temperature-sensitive blood-vessel-embolic nanogels for improving hypoxic tumor microenvironment after transcatheter arterial embolization

Transcatheter arterial embolization (TAE) plays an important role in clinical tumor therapy by accomplishing vessel-casting embolization of tumor arteries at all levels and suppressing tumor collateral circulation and vascular re-canalization. In this study, we describe smart blood-vessel-embolic nanogels for improving the anti-tumor efficacy of TAE therapy on hepatocellular carcinoma (HCC). Methods: In this study, an in vitro model composed of two microfluidic chips was used for simulating the tumor capillary network and analyzing artery-embolization properties. Also, blood-vessel-casting embolization of renal arteries was evaluated in normal rabbits. Using a VX2 tumor-bearing rabbit model, the therapeutic efficacy of TAE on HCC was investigated for tumor growth, necrosis, and proliferation. Neovascularization and collateral circulation were evaluated by immunofluorescent detection of hypoxia-inducible factor-1α (HIF-1α), vascular endothelial growth factor (VEGF), and CD31 following the TAE therapy of VX2 tumor-bearing rabbits. Results: Sufficient embolization of all eight levels of micro-channels was achieved in a tumor-vessel-mimetic model with two microfluidic chips using PIBI-2240, and was further confirmed in renal arteries of normal rabbit. Effective inhibition of tumor collateral circulation and vascular re-canalization was observed in VX2 tumor-bearing rabbits due to the reduced expression levels of HIF-1α, VEGF, and CD31. Conclusions: The exceptional anti-tumor effect of PIBI-2240 observed in this study suggested that it is an excellent blood-vessel-embolic material for tumor TAE therapy.

Multi-scale pectin/polyphenol beads for non-fouling fluorescence tracking on soft matter under water

The smart polyphenol material could be designed to form two competitive interactions related to same one polyphenol molecule with different objects that could easily adhere to one surface through the weak interaction, and also could be entirely removed from the same surface by the strong interaction. In this study, the multi-scale pectin beads were fabricated by crosslinking with ions that could be acted as polyphenol loading agent through electrostatic force between the ions loading on the surface of pectin beads and polyphenol. The two effects on the size and appearance of pectin beads were detected. Because of the hydrogen bond between polyphenols loading on the beads and the surface of target, fluorescence-functionalized beads could easily adhere on target surfaces. Meanwhile, attributing to stronger electrostatic force between surface ions on beads and polyphenol, the thin membrane made of the beads can be entirely removed from the target surface to avoid the pollution of fluorescence probes.

One-step preparation of nano-in-micro poly(vinyl alcohol) embolic microspheres and used for dual-modal T1/T2-weighted magnetic resonance imaging

It is crucial to develop dual or multi-modal self-imaging embolic microspheres to evaluate the effects of transcatheter arterial embolization therapy of tumor. However, the preparation of such hybrid microspheres always involved in multiple steps or complicated conditions. Here, poly(vinyl alcohol) (PVA) hybrid microspheres with dual-modal T₁/T₂-weighted magnetic resonance imaging (MRI) have been prepared based on microfluidic technique in one step. Gd₂O₃ and Fe₃O₄ nanoparticles with a size of ~5 nm act as T₁- and T₂-weighted MRI contrast agents, respectively, which are simultaneously in-situ synthesized in the PVA matrix via the reaction of metal ions and alkali with PVA chains as a soft template. Meanwhile, these metallic-oxide nanoparticles act as cross-linker to gelatinize the PVA droplets to obtain nano-in-micro PVA microspheres in one step. This procedure is simple, economic and feasible. The obtained nano-in-micro PVA microspheres show good magnetothermal effect, enhanced T₁- and T₂-weighted MRI and embolization effect.

In situ fabrication of radiopaque microcapsules for oral delivery and real-time gastrointestinal tracking of Bifidobacterium

INTRODUCTION

Although oral administration of Bifidobacterium is a promising approach for diseases, lack of resistance to harsh conditions and real-time tracking in gastrointestinal system in vivo are still major challenges in basic research and clinical applications.

MATERIALS AND METHODS

In this study, we fabricated a chitosan-coated alginate microcapsule loaded with in situ synthesized barium sulfate (CA/BaSO4 microcapsule) for oral Bifidobacterium delivery and real-time X-ray computed tomography (CT) imaging. CA/BaSO4 microcapsules containing the Bifidobacterium were prepared in situ by one-step electrostatic spraying method, and then coated with chitosan.

RESULTS

The results indicated that CA/BaSO4 microcapsules with an average diameter of approximately 200 μm possessed favorable mechanical stability and X-ray attenuation capacity. Encapsulation of Bifidobacteria in the CA/BaSO4 microcapsules exhibited superior resistance to cryopreservation and gastric acid environment in vitro. After oral administration in mice, these CA/BaSO4 microcapsules could be real-time visualized by CT imaging and readily reached the intestine to release Bifidobacteria.

CONCLUSION

The radiopaque CA/BaSO4 microcapsules provide a novel platform for efficient protection, non-invasive real-time monitoring and intestinal-targeted Bifidobacterium delivery.

Bench-to-clinic development of imageable drug-eluting embolization beads: finding the balance

This review describes the historical development of an imageable spherical embolic agent and focuses on work performed in collaboration between Biocompatibles UK Ltd (a BTG International group company) and the NIH to demonstrate radiopaque bead utility and bring a commercial offering to market that meets a clinical need. Various chemistries have been investigated and multiple prototypes evaluated in search of an optimized product with the right balance of handling and imaging properties. Herein, we describe the steps taken in the development of DC Bead LUMI™, the first commercially available radiopaque drug-eluting bead, ultimately leading to the first human experience of this novel embolic agent in the treatment of liver tumors.

Radiopaque nano and polymeric materials for atherosclerosis imaging, embolization and other catheterization procedures

A review of radiopaque nano and polymeric materials for atherosclerosis imaging and catheterization procedures is presented in this paper. Cardiovascular diseases (CVDs) are the leading cause of death in the US with atherosclerosis as a significant contributor for mortality and morbidity. In this review paper, we discussed the physics of radiopacity and X-ray/CT, clinically used contrast agents, and the recent progress in the development of radiopaque imaging agents and devices for the diagnosis and treatment of CVDs. We focused on radiopaque imaging agents for atherosclerosis, radiopaque embolic agents and drug eluting beads, and other radiopaque medical devices related to catheterization procedures to treat CVDs. Common strategies of introducing radiopacity in the polymers, together with examples of their applications in imaging and medical devices, are also presented.

Fabrication of inherently radiopaque BaSO4@BaAlg microspheres by a one-step electrospraying method for embolization

Inherently radiopaque BaSO₄@BaAlg microspheres were fabricated by a one-step electrospraying method for embolization and noninvasive examination after operations.

Magnetic alginate microspheres detected by MRI fabricated using microfluidic technique and release behavior of encapsulated dual drugs

Alginate microspheres loaded with superparamagnetic iron oxide nanoparticles (SPIO NPs) have been fabricated by a T-junction microfluidic device combined with an external ionic crosslinking. The obtained microspheres possess excellent visuality under magnetic resonance due to the presence of only 0.6 mg/mL SPIO NPs. The microspheres also show uniform size with narrow distribution and regular spherical shape characterized by optic microscope and environmental scanning electron microscope. Furthermore, dual drugs (5-fluorouracil and doxorubicin hydrochloride) have been loaded within the microspheres. The release behavior of dual drugs from the microspheres show typical sustained release profiles. As a novel embolic agent, such microspheres in blood vessels can be tracked by magnetic resonance scanner. Thus, the integration of embolotherapy, chemotherapy, and postoperative diagnosis can be realized.

X-ray visible and doxorubicin-loaded beads based on inherently radiopaque poly(lactic acid)-polyurethane for chemoembolization therapy

The aim of current study was to develop drug-loaded polymeric beads with intrinsic X-ray visibility as embolic agents, targeting for noninvasive intraoperative location and postoperative examination during chemoembolization therapy. To endow polymer with inherent radiopacity, 4,4'-isopropylidinedi-(2,6-diiodophenol) (IBPA) was firstly synthesized and employed as a contrast agent, and then a set of radiopaque iodinated poly(lactic acid)-polyurethanes (I-PLAUs) via chain extender method were synthesized and characterized. These I-PLAU copolymers possessed sufficient radiopacity, in vitro non-cytotoxicity with human adipose-derived stem cells, and in vivo biocompatibility and degradability in rabbit model via intramuscular implantation. Doxorubicin (DOX), as a chemotherapeutic agent, was further incorporated into I-PLAU beads via a double emulsification (W/O/W) method. For drug release, two ratios of DOX-loaded I-PLAU beads exhibited calibrated size (200-550μm), porous internal structure, good X-ray visibility, evenly drug loading as well as tunable drug release. A preliminary test on in vitro tumor cell toxicity demonstrated that the DOX-loaded I-PLAU beads performed efficient anti-tumor effect. This study highlights novel X-ray visible drug-loaded I-PLAU beads used as promising embolic agents for non-invasive in situ X-ray tracking and efficient chemotherapy, which could bring opportunities to the next generation of multifunctional embolic agents.

Polymeric materials for embolic and chemoembolic applications

Percutaneous transcatheter embolization procedures involve the selective occlusion of blood vessels. Occlusive agents, referred to as embolics, vary in material characteristics including chemical composition, mechanical properties, and the ability to concurrently deliver drugs. Commercially available polymeric embolics range from gelatin foam to synthetic polymers such as poly(vinyl alcohol). Current systems under investigation include tunable, bioresorbable microspheres composed of chitosan or poly(ethylene glycol) derivatives, in situ gelling liquid embolics with improved safety profiles, and radiopaque embolics that are trackable in vivo. This article reviews commercially available materials used for embolization as well as polymeric materials that are under investigation.

In vitro and in vivo MRI visualization of nanocomposite biodegradable microcapsules with tunable contrast

Tunable MRI contrast of microcapsules was obtained.

A thermoresponsive supramolecular copolymer hydrogel for the embolization of kidney arteries

A thermoresponsive supramolecular p(N-acryloyl glycinamide-co-acrylamide) (PNAGA-PAAm) copolymer hydrogel was developed for the embolization of renal arteries in rabbits.