Catechol-Functionalized Hyaluronic Acid Hydrogels Enhance Angiogenesis and Osteogenesis of Human Adipose-Derived Stem Cells in Critical Tissue Defects

Click method preserves but EDC method compromises the therapeutic activities of the peptide-activated hydrogels for critical ischemic vessel regeneration

Peptide-functionalized hydrogel is one of commonly used biomaterials to introduce hydrogel-induced vessel regeneration. Despite many reports about the discoveries of high-active peptides (or ligands) for regeneration, the study on the conjugating methods for the hydrogel functionalization with peptides is limited. Here, we compared the vasculogenic efficacy of the peptide-functionalized hydrogels prepared by two commonly used conjugating methods, 1-ethyl-3-(3-dimethylamino propyl) carbodiimide (EDC) and Click methods, through cell models, organ-on-chips models, animal models, and RNA sequencing analysis. Two vascular-related cell types, the human umbilical vein endothelial cells (HUVECs) and the adipose-derived stem cells (ADSCs), have been cultured on the hydrogel surfaces prepared by EDC/Click methods. It showed that the hydrogels prepared by Click method supported the higher vasculogenic activities while the ones made by EDC method compromised the peptide activities on hydrogels. The vasculogenesis assays further revealed that hydrogels prepared by Click method promoted a better vascular network formation. In a critical ischemic hindlimb model, only the peptide-functionalized hydrogels prepared by Click method successfully salvaged the ischemic limb, significantly improved blood perfusion, and enhanced the functional recoveries (through gait analysis and animal behavior studies). RNA sequencing studies revealed that the hydrogels prepared by Click method significantly promoted the PI3K-AKT pathway activation compared to the hydrogels prepared by EDC method. All the results suggested that EDC method compromised the functions of the peptides, while Click method preserved the vascular regenerating capacities of the peptides on the hydrogels, illustrating the importance of the conjugating method during the preparation of the peptide-functionalized hydrogels.

Antimicrobial polyacrylic acid/tannic acid hydrogel wound dressing facilitating full-thickness skin healing

Polyphenolic compound-modified hydrogel wound dressings with excellent wet tissue adhesion, antimicrobial properties, stretchability, and full-thickness skin healing properties are still extremely rare so far. Polyphenolic compounds such as tannic acid or dopamine can improve the antibacterial and bioadhesive properties of hydrogels, and are also polymerization inhibitors for free radical polymerization. In this study, polyacrylic acid (PAA) aqueous solution was first synthesized, and then antibacterial PAA-TA hydrogel was prepared by mixing it with tannic acid (TA) and the crosslinker 1,6-hexanediol bis(2-methyl-1-propionic acid azide) (HBMAP). This method avoids the hindrance of the phenolic hydroxyl groups in TA on acrylic acid polymerization, and we were able to obtain a series of TA hydrogels (in the range of 0-15 wt.%. We applied these PAA-TA hydrogels to wound dressings and found that they had excellent adhesion to biological tissues, and the tensile strength and elongation at break of PAA-TA hydrogels with 15 wt.%TA content were as high as 1.72 MPa and 1446.3% in tensile strength evaluation. In addition, microbiological analysis showed that wound dressings had significant antimicrobial activity against Staphylococcus aureus and Escherichia coli. In vitro wound healing experiments confirmed that the wound dressing was biocompatible and could significantly promote the healing of full-thickness skin defects in the guinea pig model. Our work describes an injectable, self-healing, antimicrobial hydrogel that may have promising clinical applications as a wound dressing material.

Engineering alginate-based injectable hydrogels combined with bioactive polymers for targeted plasma-derived oxidative stress delivery in osteosarcoma therapy

Reactive Oxygen and Nitrogen Species (RONS) in biological systems display hormetic effects, capable of either promoting cell regenerative effects or inducing cell death. Recently, hydrogels have emerged as a promising delivery platform for RONS generated from Cold Atmospheric Plasmas (CAP), known as Plasma-Treated Hydrogels (PTH). PTH have been proposed as an alternative therapy to conventional cancer treatments, offering reduced side effects through the controlled and localized delivery of plasma-derived RONS. In this work, we have developed alginate-based PTH with dual therapeutic action provided by plasma-derived RONS acting as selective anticancer agents for osteosarcoma treatment, and biomolecules (hyaluronic acid and gelatin) to promote stem cell-mediated bone regeneration. For this purpose, we designed a novel manufacturing process to maximize the load of plasma-derived RONS within the PTH. Then, we assessed the PTH bioactivity on osteosarcoma MG-63 cells, and human mesenchymal stem cells (hMSCs). The results showed that the PTH composed of 0.25 % alginate +1 % hyaluronic acid is the most promising formulation in osteosarcoma treatment, showing a dual-action bioactivity as a selective cytotoxic anticancer agent, and as promoter of the proliferation and osteogenic differentiation of hMSCs. These findings provide strong evidence of the significant potential of PTH in the oncological field.

Injectable Nanoengineered Adhesive Hydrogel for Treating Enterocutaneous Fistulas

Enterocutaneous fistula (ECF) is a severe medical condition where an abnormal connection forms between the gastrointestinal tract and skin. ECFs are, in most cases, a result of surgical complications such as missed enterotomies or anastomotic leaks. The constant leakage of enteric and fecal contents from the fistula site leads to skin breakdown and increases the risk of infection. Despite advances in surgical techniques and postoperative management, ECF accounts for significant mortality rates, estimated between 15-20%, and causes debilitating morbidity. Therefore, there is a critical need for a simple and effective method to seal and heal ECF. Injectable hydrogels with combined properties of robust mechanical properties and cell infiltration/proliferation have the potential to block and heal ECF. Herein, we report the development of an injectable nanoengineered adhesive hydrogel (INAH) composed of a synthetic nanosilicate (Laponite®) and a gelatin-dopamine conjugate for treating ECF. The hydrogel undergoes fast cross-linking using a co-injection method, resulting in a matrix with improved mechanical and adhesive properties. INAH demonstrates appreciable blood clotting abilities and is cytocompatible with fibroblasts. The adhesive properties of the hydrogel are demonstrated in ex vivo adhesion models with skin and arteries, where the volume stability in the hydrated internal environment facilitates maintaining strong adhesion. In vivo assessments reveal that the INAH is biocompatible, supporting cell infiltration and extracellular matrix deposition while not forming fibrotic tissue. These findings suggest that this INAH holds promising translational potential for sealing and healing ECF.

Naturally derived highly resilient and adhesive hydrogels with application as surgical adhesive

The inadequacy of conventional surgical techniques for wound closure and repair in soft and resilient tissues may lead to poor healing outcomes such as local tissue fibrosis and contracture. Therefore, the development of adhesive and resilient hydrogels that can adhere firmly to irregular and dynamic wound interfaces and provide a "tension-free proximity" environment for tissue regeneration has become extremely important. Herein, we describe an integrated modeling-experiment-application strategy for engineering a promising hydrogel-based bioadhesive based on recombinant human collagen (RHC) and catechol-modified hyaluronic acid (HA-Cat). Molecular modeling and simulations were used to verify and explore the hypothesis that RHC and HA-Cat can form an assembly complex through physical interactions. The complex was synergistically crosslinked via a catechol/o-quinone coupling reaction and a carbodiimide coupling reactions, resulting in superior hydrogels with strong adhesion and resilience properties. The application of this bioadhesive to tissue adhesion and wound sealing in vivo was successfully demonstrated, with an optimum collagen index, epidermal thickness, and lowest scar width. Furthermore, subcutaneous implantation demonstrated that the bioadhesive exhibited good biocompatibility and degradability. This newly developed hydrogel may be a highly promising surgical adhesive for medical applications, including wound closure and repair.

Microfluidic Fabrication of MicroRNA-Induced Hepatocyte-Like Cells/Human Umbilical Vein Endothelial Cells-Laden Microgels for Acute Liver Failure Treatment

Acute liver failure (ALF) is a critical life-threatening disease that occurs due to a rapid loss in hepatocyte functions. Hepatocyte transplantation holds great potential for ALF treatment, as it rapidly supports liver biofunctions and enhances liver regeneration. However, hepatocyte transplantation is still limited by renewable and ongoing cell sources. In addition, intravenously injected hepatocytes are primarily trapped in the lungs and have limited efficacy because of the rapid clearance in vivo. Here, we designed a Y-shaped DNA nanostructure to deliver microRNA-122 (Y-miR122), which could induce the hepatic differentiation and maturation of human mesenchymal stem cells. mRNA sequencing analysis revealed that the Y-miR122 promoted important hepatic biofunctions of the induced hepatocyte-like cells including fat and lipid metabolism, drug metabolism, and liver development. To further improve hepatocyte transplantation efficiency and therapeutic effects in ALF treatment, we fabricated protective microgels for the delivery of Y-miR122-induced hepatocyte-like cells based on droplet microfluidic technology. When cocultured with human umbilical vein endothelial cells in microgels, the hepatocyte-like cells exhibited an increase in hepatocyte-associated functions, including albumin secretion and cytochrome P450 activity. Notably, upon transplantation into the ALF mouse model, the multiple cell-laden microgels effectively induced the restoration of liver function and enhanced liver regeneration. Overall, this study presents an efficient approach from the generation of hepatocyte-like cells to hepatocyte transplantation in ALF therapy.

Polysaccharides, proteins, and synthetic polymers based multimodal hydrogels for various biomedical applications: A review

Nature-derived or biologically encouraged hydrogels have attracted considerable interest in numerous biomedical applications owing to their multidimensional utility and effectiveness. The internal architecture of a hydrogel network, the chemistry of the raw materials involved, interaction across the interface of counter ions, and the ability to mimic the extracellular matrix (ECM) govern the clinical efficacy of the designed hydrogels. This review focuses on the mechanistic viewpoint of different biologically driven/inspired biomacromolecules that encourages the architectural development of hydrogel networks. In addition, the advantage of hydrogels by mimicking the ECM and the significance of the raw material selection as an indicator of bioinertness is deeply elaborated in the review. Furthermore, the article reviews and describes the application of polysaccharides, proteins, and synthetic polymer-based multimodal hydrogels inspired by or derived from nature in different biomedical areas. The review discusses the challenges and opportunities in biomaterials along with future prospects in terms of their applications in biodevices or functional components for human health issues. This review provides information on the strategy and inspiration from nature that can be used to develop a link between multimodal hydrogels as the main frame and its utility in biomedical applications as the primary target.

Photocatalytic and Photothermal Antimicrobial Mussel-Inspired Nanocomposites for Biomedical Applications

Bacterial infection has traditionally been treated with antibiotics, but their overuse is leading to the development of antibiotic resistance. This may be mitigated by alternative approaches to prevent or treat bacterial infections without utilization of antibiotics. Among the alternatives is the use of photo-responsive antimicrobial nanoparticles and/or nanocomposites, which present unique properties activated by light. In this study, we explored the combined use of titanium oxide and polydopamine to create nanoparticles with photocatalytic and photothermal antibacterial properties triggered by visible or near-infrared light. Furthermore, as a proof-of-concept, these photo-responsive nanoparticles were combined with mussel-inspired catechol-modified hyaluronic acid hydrogels to form novel light-driven antibacterial nanocomposites. The materials were challenged with models of Gram-negative and Gram-positive bacteria. For visible light, the average percentage killed (PK) was 94.6 for E. coli and 92.3 for S. aureus. For near-infrared light, PK for E. coli reported 52.8 and 99.2 for S. aureus. These results confirm the exciting potential of these nanocomposites to prevent the development of antibiotic resistance and also to open the door for further studies to optimize their composition in order to increase their bactericidal efficacy for biomedical applications.

Metabolic Modulation of Intracellular Ammonia via Intravesical Instillation of Nanoporter-Encased Hydrogel Eradicates Bladder Carcinoma

Tumor protein 53 (TP53) mutation in bladder carcinoma (BC), upregulates the transcription of carbamoyl phosphate synthetase 1 (CPS1), to reduce intracellular ammonia toxicity. To leverage ammonia combating BC, here, an intravesically perfusable nanoporter-encased hydrogel system is reported. A biomimetic fusogenic liposomalized nanoporter (FLNP) that is decorated with urea transporter-B (UT-B) is first synthesized with protonated chitosan oligosaccharide for bladder tumor-targeted co-delivery of urease and small interfering RNA targeting CPS1 (siCPS1). Mussel-inspired hydrogel featured with dual functions of bio-adhesion and injectability is then fabricated as the reservoir for intravesical immobilization of FLNP. It is found that FLNP-mediated UT-B immobilization dramatically induces urea transportation into tumor cells, and co-delivery of urease and siCPS1 significantly boosts ammonia accumulation in tumor inducing cell apoptosis. Treatment with hybrid system exhibits superior anti-tumor effect in orthotopic bladder tumor mouse model and patient-derived xenograft model, respectively. Combined with high-protein diet, the production of urinary urea increases, leading to an augmented intracellular deposition of ammonia in BC cells, and ultimately an enhanced tumor inhibition. Together, the work establishes that cascade modulation of ammonia in tumor cells could induce tumor apoptosis and may be a practical strategy for eradication of TP53-mutated bladder cancer.

Hyaluronic acid-based hydrogels: As an exosome delivery system in bone regeneration

Exosomes are extracellular vesicles (EVs) containing various ingredients such as DNA, RNA, lipids and proteins, which play a significant role in intercellular communication. Numerous studies have demonstrated the important role of exosomes in bone regeneration through promoting the expression of osteogenic-related genes and proteins in mesenchymal stem cells. However, the low targeting ability and short circulating half-life of exosomes limited their clinical application. In order to solve those problems, different delivery systems and biological scaffolds have been developed. Hydrogel is a kind of absorbable biological scaffold composed of three-dimensional hydrophilic polymers. It not only has excellent biocompatibility and superior mechanical strength but can also provide a suitable nutrient environment for the growth of the endogenous cells. Thus, the combination between exosomes and hydrogels can improve the stability and maintain the biological activity of exosomes while achieving the sustained release of exosomes in the bone defect sites. As an important component of the extracellular matrix (ECM), hyaluronic acid (HA) plays a critical role in various physiological and pathological processes such as cell differentiation, proliferation, migration, inflammation, angiogenesis, tissue regeneration, wound healing and cancer. In recent years, hyaluronic acid-based hydrogels have been used as an exosome delivery system for bone regeneration and have displayed positive effects. This review mainly summarized the potential mechanism of HA and exosomes in promoting bone regeneration and the application prospects and challenges of hyaluronic acid-based hydrogels as exosome delivery devices in bone regeneration.

Design of Injectable Bioartificial Hydrogels by Green Chemistry for Mini-Invasive Applications in the Biomedical or Aesthetic Medicine Fields

Bioartificial hydrogels are hydrophilic systems extensively studied for regenerative medicine due to the synergic combination of features of synthetic and natural polymers. Injectability is another crucial property for hydrogel mini-invasive administration. This work aimed at engineering injectable bioartificial in situ cross-linkable hydrogels by implementing green and eco-friendly approaches. Specifically, the versatile poly(ether urethane) (PEU) chemistry was exploited for the development of an amphiphilic PEU, while hyaluronic acid was selected as natural component. Both polymers were functionalized to expose thiol and catechol groups through green water-based carbodiimide-mediated grafting reactions. Functionalization was optimized to maximize grafting yield while preserving group functionality. Then, polymer miscibility was studied at the macro-, micro-, and nano-scale, suggesting the formation of hydrogen bonds among polymeric chains. All hydrogels could be injected through G21 and G18 needles in a wide temperature range (4-25 °C) and underwent sol-to-gel transition at 37 °C. The addition of an oxidizing agent to polymer solutions did not improve the gelation kinetics, while it negatively affected hydrogel stability in an aqueous environment, suggesting the occurrence of oxidation-triggered polymer degradation. In the future, the bioartificial hydrogels developed herein could find application in the biomedical and aesthetic medicine fields as injectable formulations for therapeutic agent delivery.

Rheology and Gelation of Hyaluronic Acid/Chitosan Coacervates

Hyaluronic acid (HA) and chitosan (CHI) are biopolyelectrolytes which are interesting for both the medical and polymer physics communities due to their biocompatibility and semi-flexibility, respectively. In this work, we demonstrate by rheology experiments that the linear viscoelasticity of HA/CHI coacervates depends strongly on the molecular weight of the polymers. Moduli for coacervates were found significantly higher than those of individual HA and CHI physical gels. A remarkable 1.5-fold increase in moduli was noted when catechol-conjugated HA and CHI were used instead. This was attributed to the conversion of coacervates to chemical gels by oxidation of 3,4-dihydroxyphenylalanine (DOPA) groups in HA and CHI to di-DOPA crosslinks. These rheological results put HA/CHI coacervates in the category of strong candidates as injectable tissue scaffolds or medical adhesives.

pH-Universal Catechol-Amine Chemistry for Versatile Hyaluronic Acid Bioadhesives

Catechol, a major mussel-inspired underwater adhesive moiety, has been used to develop functional adhesive hydrogels for biomedical applications. However, oxidative catechol chemistry for interpolymer crosslinking and adhesion is exclusively effective under alkaline conditions, with limited applications in non-alkaline conditions. To overcome this limitation, pH-universal catechol-amine chemistry to recapitulate naturally occurring biochemical events induced by pH variation in the mussel foot is suggested. Aldehyde moieties are introduced to hyaluronic acid (HA) by partial oxidation, which enables dual-mode catechol tethering to the HA via both stable amide and reactive secondary amine bonds. Because of the presence of additional reactive amine groups, the resultant aldehyde-modified HA conjugated with catechol (AH-CA) is effectively crosslinked in acidic and neutral pH conditions. The AH-CA hydrogel exhibits not only fast gelation via active crosslinking regardless of pH conditions, but also strong adhesion and excellent biocompatibility. The hydrogel enables rapid and robust wound sealing and hemostasis in neutral and alkaline conditions. The hydrogel also mediates effective therapeutic stem cell and drug delivery even in dynamic and harsh environments, such as a motile heart and acidic stomach. Therefore, the AH-CA hydrogel can serve as a versatile biomaterial in a wide range of pH conditions in vivo.

Manufacturing functional hydrogels for inducing angiogenic-osteogenic coupled progressions in hard tissue repairs: prospects and challenges

In large bone defects, inadequate vascularization within the engineered constructs has been a major challenge in developing clinically impactful products. It is fairly determined that bone tissues and blood vessels are established concurrently throughout tissue repairs after an injury. Thus, the coupling of angiogenesis-osteogenesis is an essential course of action in bone tissue restoration. The manufacture of biomaterial-based scaffolds plays a decisive role in stimulating angiogenic and osteogenic progressions (instruction of neovascularization and bone mineralization). Bone hydrogels with optimal conditions are more efficient at healing bone defects. There has been a remarkable advancement in producing bone substitutes in the tissue engineering area, but the sufficient and timely vascularization of engineered constructs for optimal tissue integration and regeneration is lacking due to mismatch in the scaffold characteristics and new bone tissue reconstruction. Therefore, various key challenges remain to be overcome. A deep understanding of angiogenesis and osteogenesis progressions is required to manufacture bone hydrogels with satisfactory results. The current review briefly discusses the fundamentals of bone tissues, the significance of angiogenesis-osteogenesis progressions and their inducers, the efficacy of biomaterials and composite hydrogel-promoted neo-vasculogenesis (i.e. angiogenesis) and bone mineralization (i.e. osteogenesis), and related challenges, including future research directions.

Advances for the treatment of lower extremity arterial disease associated with diabetes mellitus

Lower extremity arterial disease (LEAD) is a major vascular complication of diabetes. Vascular endothelial cells dysfunction can exacerbate local ischemia, leading to a significant increase in amputation, disability, and even mortality in patients with diabetes combined with LEAD. Therefore, it is of great clinical importance to explore proper and effective treatments. Conventional treatments of diabetic LEAD include lifestyle management, medication, open surgery, endovascular treatment, and amputation. As interdisciplinary research emerges, regenerative medicine strategies have provided new insights to treat chronic limb threatening ischemia (CLTI). Therapeutic angiogenesis strategies, such as delivering growth factors, stem cells, drugs to ischemic tissues, have also been proposed to treat LEAD by fundamentally stimulating multidimensional vascular regeneration. Recent years have seen the rapid growth of tissue engineering technology; tissue-engineered biomaterials have been used to study the treatment of LEAD, such as encapsulation of growth factors and drugs in hydrogel to facilitate the restoration of blood perfusion in ischemic tissues of animals. The primary purpose of this review is to introduce treatments and novel biomaterials development in LEAD. Firstly, the pathogenesis of LEAD is briefly described. Secondly, conventional therapies and therapeutic angiogenesis strategies of LEAD are discussed. Finally, recent research advances and future perspectives on biomaterials in LEAD are proposed.

Mussel‐Inspired Biomaterials: From Chemistry to Clinic

After several billions of years, nature still makes decisions on its own to identify, develop, and direct the most effective material for phenomena/challenges faced. Likewise, and inspired by the nature, we learned how to take steps in developing new technologies and materials innovations. Wet and strong adhesion by Mytilidae mussels (among which Mytilus edulis—blue mussel and Mytilus californianus—California mussel are the most well‐known species) has been an inspiration in developing advanced adhesives for the moist condition. The wet adhesion phenomenon is significant in designing tissue adhesives and surgical sealants. However, a deep understanding of engaged chemical moieties, microenvironmental conditions of secreted proteins, and other contributing mechanisms for outstanding wet adhesion mussels are essential for the optimal design of wet glues. In this review, all aspects of wet adhesion of Mytilidae mussels, as well as different strategies needed for designing and fabricating wet adhesives are discussed from a chemistry point of view. Developed muscle‐inspired chemistry is a versatile technique when designing not only wet adhesive, but also, in several more applications, especially in the bioengineering area. The applications of muscle‐inspired biomaterials in various medical applications are summarized for future developments in the field.

Hydrogel Development for Rotator Cuff Repair

Rotator cuff tears (RCTs) are common in shoulder disease and disability. Despite significant advances in surgical repair techniques, 20–70% of patients still have postoperative rotator cuff dysfunction. These functional defects may be related to retear or rotator cuff quality deterioration due to tendon retraction and scar tissue at the repair site. As an effective delivery system, hydrogel scaffolds may improve the healing of RCTs and be a useful treatment for irreparable rotator cuff injuries. Although many studies have tested this hypothesis, most are limited to laboratory animal experiments. This review summarizes differences in hydrogel scaffold construction, active ingredients, and application methods in recent research. Efforts to determine the indications of hydrogel scaffolds (with different constructions and cargos) for various types of RCTs, as well as the effectiveness and reliability of application methods and devices, are also discussed.

Bioadhesive Hyaluronic Acid/Dopamine Hydrogels for Vascular Applications Prepared by Initiator-Free Crosslinking

Intimal hyperplasia, a vascular pathology characterized by vessel wall thickening, is implicated in vein graft failures. For efficient prevention, a biodegradable drug delivery system should be applied externally to the graft for an extended time. Finding a gel suitable for such a system is challenging. We have synthesized HA-Dopamine conjugates (HA-Dop) with several degrees of substitution (DS) and used two crosslinking methods: initiator-free crosslinking by basic pH shift or commonly used crosslinking by a strong oxidizer, sodium periodate. The rheological properties, bioadhesion to vascular tissue, cytocompatibility with fibroblasts have been compared for both methods. Our results suggest that initiator-free crosslinking provides HA-Dop gels with more adequate properties with regards to vascular application than crosslinking by strong oxidizer. We have also established the cytocompatibility of the initiator-free crosslinked HA-Dop gels and the cytotoxicity of dopamine-sodium periodate combinations. Furthermore, we have incorporated a drug with anti-restenotic effect in perivascular application, atorvastatin, into the gel, which showed adequate release profile for intimal hyperplasia prevention. The oxidizer-free formulation with improved bioadhesion holds promise as an efficient and safe drug delivery system for vascular applications.

An instantly fixable and self-adaptive scaffold for skull regeneration by autologous stem cell recruitment and angiogenesis

Limited stem cells, poor stretchability and mismatched interface fusion have plagued the reconstruction of cranial defects by cell-free scaffolds. Here, we designed an instantly fixable and self-adaptive scaffold by dopamine-modified hyaluronic acid chelating Ca²⁺ of the microhydroxyapatite surface and bonding type I collagen to highly simulate the natural bony matrix. It presents a good mechanical match and interface integration by appropriate calcium chelation, and responds to external stress by flexible deformation. Meanwhile, the appropriate matrix microenvironment regulates macrophage M2 polarization and recruits endogenous stem cells. This scaffold promotes the proliferation and osteogenic differentiation of BMSCs in vitro, as well as significant ectopic mineralization and angiogenesis. Transcriptome analysis confirmed the upregulation of relevant genes and signalling pathways was associated with M2 macrophage activation, endogenous stem cell recruitment, angiogenesis and osteogenesis. Together, the scaffold realized 97 and 72% bone cover areas after 12 weeks in cranial defect models of rabbit (Φ = 9 mm) and beagle dog (Φ = 15 mm), respectively.

Limited stem cells and mismatched interface fusion have plagued biomaterial-mediated cranial reconstruction. Here, the authors engineer an instantly fixable and self-adaptive scaffold to promote calcium chelation and interface integration, regulate macrophage M2 polarization, and recruit endogenous stem cells.

Injection laryngoplasty of human adipose-derived stem cell spheroids with hyaluronic acid-based hydrogel improves the morphological and functional characteristics of geriatric larynx

Aim

As the geriatric population increased, the need of treatment for laryngeal atrophy and dysfunction increased. This study was performed to evaluate the effects of injection of human adipose-derived stem cell (hASC) spheroid-loaded catechol-conjugated hyaluronic acid (HA-CA) hydrogel on therapeutic rejuvenation of the geriatric larynx.

Methods

Stem cell spheroids with hyaluronic acid-based hydrogel were injected into the laryngeal muscles of 18-month-old Sprague–Dawley rats. The effects of hASC spheroids were examined in the following four groups: SHAM, injected with PBS; GEL, injected with HA-CA hydrogel; MONO, injected with single hASCs in HA-CA hydrogel; and SP, injected with hASCs spheroids in HA-CA hydrogel. The rejuvenation efficacy in geriatric laryngeal muscle tissues at 12 weeks postinjection was evaluated and compared by histology, immunofluorescence staining, and functionality analysis.

Results

Total myofiber cross-sectional area and myofiber number/density, evaluated by detection of myosin heavy chain with antibodies against laminin and fast myosin heavy chain, were significantly higher in the SP group than in the other groups. The lamina propria of the larynx was evaluated by alcian blue staining, which showed that the HA was increased significantly in the SP group compared to the other groups. In functional analysis, the glottal gap area was significantly reduced in the SP group compared to the other groups. The phase difference in the vocal fold during vibration was also smaller in the SP group than in the other groups, but the difference did not reach statistical significance.

Conclusion

Injection of hASC spheroids with hyaluronic acid-based hydrogel improves the morphological and functional characteristics of geriatric larynx.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s40824-022-00261-x.

Polydopamine nanoparticles and hyaluronic acid hydrogels for mussel-inspired tissue adhesive nanocomposites

Bioadhesives are intended to facilitate the fast and efficient reconnection of tissues to restore their functionality after surgery or injury. The use of mussel-inspired hydrogel systems containing pendant catechol moieties is promising for tissue attachment under wet conditions. However, the adhesion strength is not yet ideal. One way to overcome these limitations is to add polymeric nanoparticles to create nanocomposites with improved adhesion characteristics. To further enhance adhesiveness, polydopamine nanoparticles with controlled size prepared using an optimized process, were combined with a mussel-inspired hyaluronic acid (HA) hydrogel to form a nanocomposite. The effects of sizes and concentrations of polydopamine nanoparticles on the adhesive profiles of mussel-inspired HA hydrogels were investigated. Results show that the inclusion of polydopamine nanoparticles in nanocomposites increased adhesion strength, as compared to the addition of poly (lactic-co-glycolic acid) (PLGA), and PLGA-(N-hydroxysuccinimide) (PLGA-NHS) nanoparticles. A nanocomposite with demonstrated cytocompatibility and an optimal lap shear strength (47 ± 3 kPa) was achieved by combining polydopamine nanoparticles of 200 nm (12.5% w/v) with a HA hydrogel (40% w/v). This nanocomposite adhesive shows its potential as a tissue glue for biomedical applications.

Development of bioactive catechol functionalized nanoparticles applicable for 3D bioprinting

Efficient wound treatments to target specific events in the healing process of chronic wounds constitute a significant aim in regenerative medicine. In this sense, nanomedicine can offer new opportunities to improve the effectiveness of existing wound therapies. The aim of this study was to develop catechol bearing polymeric nanoparticles (NPs) and to evaluate their potential in the field of wound healing. Thus, NPs wound healing promoting activities, potential for drug encapsulation and controlled release, and further incorporation in a hydrogel bioink formulation to fabricate cell-laden 3D scaffolds are studied. NPs with 2 and 29 M % catechol contents (named NP2 and NP29) were obtained by nanoprecipitation and presented hydrodynamic diameters of 100 and 75 nm respectively. These nanocarriers encapsulated the hydrophobic compound coumarin-6 with 70% encapsulation efficiency values. In cell culture studies, the NPs had a protective effect in RAW 264.7 macrophages against oxidative stress damage induced by radical oxygen species (ROS). They also presented a regulatory effect on the inflammatory response of stimulated macrophages and promoted upregulation of the vascular endothelial growth factor (VEGF) in fibroblasts and endothelial cells. In particular, NP29 were used in a hydrogel bioink formulation using carboxymethyl chitosan and hyaluronic acid as polymeric matrices. Using a reactive mixing bioprinting approach, NP-loaded hydrogel scaffolds with good structural integrity, shape fidelity and homogeneous NPs dispersion, were obtained. The in vitro catechol NPs release profile of the printed scaffolds revealed a sustained delivery. The bioprinted scaffolds supported viability and proliferation of encapsulated L929 fibroblasts over 14 days. We envision that the catechol functionalized NPs and resulting bioactive bioink presented in this work offer promising advantages for wound healing applications, as they: 1) support controlled release of bioactive catechol NPs to the wound site; 2) can incorporate additional therapeutic functions by co-encapsulating drugs; 3) can be printed into 3D scaffolds with tailored geometries based on patient requirements.

Effect of tannic acid on the mechanical and adhesive properties of catechol-modified hyaluronic acid hydrogels

Hyaluronic acid (HA) is applied in various fields, including pharmaceutical science, owing to its favorable biological properties such as moisture retention, non-toxicity, biodegradability, biocompatibility and biodegradability. In particular, many studies have aimed at its application in the form of a hydrogel. However, the applications of HA hydrogels are limited owing to their poor mechanical properties. In this study, an HA-catechol conjugate (HA-Cat) was synthesized by reacting the HA polymer with dopamine to improve its adhesion to various substrates. The HA-Cat hydrogel was prepared via oxidative crosslinking using a small amount of NaIO₄ as the oxidant, and the hydrogel formation was investigated by rheological and mechanical studies. Further, the effect of tannic acid (TA) on the adhesive strength and compressive strength of the HA-Cat/TA hydrogels was examined according to the amount of NaIO₄ used for crosslinking and the TA contents. Both the adhesive and compressive properties of the HA-Cat hydrogels were improved with the addition of TA. The HA-based hydrogels containing TA have great potential as cost-effective and biocompatible medical adhesives.

Hyaluronic acid hydrogels, as a biological macromolecule-based platform for stem cells delivery and their fate control: A review

Stem cell-based therapies offer numerous potentials to repair damaged or defective organs. The therapeutic outcomes of human studies, however, fall far short from what is expected. Enhancing stem cells local density and longevity would possibly maximize their healing potential. One promising strategy is to administer stem cells via injectable hydrogels. However, stem cells differentiation process is a delicate matter which is easily affected by various factors such as their interaction with their surrounding materials. Among various biomaterial options for hydrogels' production, hyaluronic acid (HA) has shown great promise. HA is a naturally occurring biological macromolecule, a polysaccharide of large molecular weight which is involved in cell proliferation, cell migration, angiogenesis, fetal development, and tissue function. In the current study we will discuss the applications, prospects, and challenges of HA-based hydrogels in stem cell delivery and fate control.

A catechol-chitosan-based adhesive and injectable hydrogel resistant to oxidation and compatible with cell therapy

Injectable hydrogels designed for cell therapy need to be adhesive to the surrounding tissues to maximize their retention and the communication between the host and the encapsulated cells. Catechol grafting is an efficient and well-known strategy to improve the adhesive properties of various polymers, including chitosan. However, catechol groups are also known to be cytotoxic as they oxidize into quinones in alkaline environments. Usually, hydrogels made from catechol-grafted chitosan (cat-CH) oxidize quickly, which tends to limit adhesion and prevent cell encapsulation. In this work, we limited oxidation and improved the cytocompatibility of cat-CH hydrogels by grafting chitosan with dihydroxybenzoic acid (DHBA), a small cat-bearing molecule known to have a high resistance to oxidation. We show that DHBA-grafted CH (dhba-CH) oxidized significantly slower and to a lesser extent that cat-CH made with hydrocaffeic acid (hca-CH). By combining dhba-CH with sodium bicarbonate and phosphate buffer, we fabricated thermosensitive injectable hydrogels with higher mechanical properties, quicker gelation and significantly lower oxidation than previously designed cat-CH systems. The resulting gels are highly adhesive on inorganic substrates and support L929 fibroblast encapsulation with high viability (≥90% after 24 hours), something that was not possible in any previously designed cat-CH gel system. These properties make the dhba-CH hydrogels excellent candidates for minimally invasive and targeted cell therapy in applications that require high adhesive strength.

Rational engineering and applications of functional bioadhesives in biomedical engineering

For the past decades, several bioadhesives have been developed to replace conventional wound closure medical tools such as sutures, staples, and clips. The bioadhesives are easy to use and can minimize tissue damage. They are designed to provide strong adhesion with stable mechanical support on tissue surfaces. However, this monofunctionality of the bioadhesives hinders their practical applications. In particular, a bioadhesive can lose its intended function under harsh tissue environments or delay tissue regeneration during wound healing. Based on several natural and synthetic biomaterials, functional bioadhesives have been developed to overcome the aforementioned limitations. The functional bioadhesives are designed to have specific characteristics such as antimicrobial, cell infiltrative, stimuli-responsive, electrically conductive, and self-healing to ensure stability under harsh tissue conditions, facilitate tissue regeneration, and effectively monitor biosignals. Herein, we thoroughly review the functional bioadhesives from their fundamental background to recent progress with their practical applications for the enhancement of tissue healing and effective biosignal sensing. Furthermore, the future perspectives on the applications of functional bioadhesives and current challenges in their commercialization are also discussed.

Fungal brain infection modelled in a human-neurovascular-unit-on-a-chip with a functional blood-brain barrier

The neurovascular unit, which consists of vascular cells surrounded by astrocytic end-feet and neurons, controls cerebral blood flow and the permeability of the blood-brain barrier (BBB) to maintain homeostasis in the neuronal milieu. Studying how some pathogens and drugs can penetrate the human BBB and disrupt neuronal homeostasis requires in vitro microphysiological models of the neurovascular unit. Here we show that the neurotropism of Cryptococcus neoformans-the most common pathogen causing fungal meningitis-and its ability to penetrate the BBB can be modelled by the co-culture of human neural stem cells, brain microvascular endothelial cells and brain vascular pericytes in a human-neurovascular-unit-on-a-chip maintained by a stepwise gravity-driven unidirectional flow and recapitulating the structural and functional features of the BBB. We found that the pathogen forms clusters of cells that penetrate the BBB without altering tight junctions, suggesting a transcytosis-mediated mechanism. The neurovascular-unit-on-a-chip may facilitate the study of the mechanisms of brain infection by pathogens, and the development of drugs for a range of brain diseases.

On-demand retrieval of cells three-dimensionally seeded in injectable thioester-based hydrogels

Scaffold systems that can easily encapsulate cells and safely retrieve them at the desired time are important for the advancement of cell-based medicine. In this study, we designed and fabricated thioester-based poly(ethylene glycol) (PEG) hydrogels with injectability and on-demand degradability as new scaffold materials for cells. Hydrogels can be formed in situ within minutes via thioester cross-linking between PEG molecules and can be degraded under mild conditions in response to l-cysteine molecules through thiol exchange occurring at the thioester linkage. Various cell experiments, especially with sucrose, which enables the adjustment of the osmotic pressure around the cells, showed that the damage to the cells during encapsulation and degradation was minimal, indicating the capability of on-demand retrieval of intact cells. This hydrogel system is a versatile tool in the field of cell-based research and applications such as tissue regeneration and regenerative medicine.

Human mesenchymal stem/stromal cells can be three-dimensionally encapsulated in hydrogels cross-linked with thioester linkages. Degrading the cell-embedded hydrogels by l-cysteine molecules enables safe on-demand retrieval of the cells.

Self-crosslinkable hyaluronate-based hydrogels as a soft tissue filler

With increasing interest in aging and skin care, the use of fillers to increase the volume of soft tissue volume is increasing globally. However, the side effects caused by the residual chemical crosslinking agents present in these fillers limit the effective application of commercialized filler products. Therefore, the development of a novel crosslinking system with a non-toxic chemical crosslinking agent is required to overcome the limitations of commercial hyaluronate (HA)-based fillers. In this paper, a new injectable hydrogel with enhanced mechanical properties, tissue adhesion, injectability, and biocompatibility is reported. The HA derivatives modified with catechol groups (HA-DA) were crosslinked by self-oxidation under in vivo physiological conditions (pH 7.4) without chemical crosslinkers to form hydrogels, which can be further accelerated by the dissolved oxygen in the body. The fabricated HA-DA filler showed excellent mechanical properties and could be easily injected with a low injection force. Further, the HA-DA filler stably attached to the injection site due to the tissue adhesion properties of the catechol groups, thus leading to an improved displacement stability. In addition, the HA-DA filler showed excellent cell viability, cell proliferation, and biocompatibility. Therefore, the HA-DA hydrogel is a novel soft tissue filler with great potential to overcome the limitations of commercial soft tissue fillers.

3D Printing Unique Nanoclay-Incorporated Double-Network Hydrogels for Construction of Complex Tissue Engineering Scaffolds

The development of new biomaterial inks with good structural formability and mechanical strength is critical to the fabrication of 3D tissue engineering scaffolds. For extrusion-based 3D printing, the resulting 3D constructs are essentially a sequential assembly of 1D filaments into 3D constructs. Inspired by this process, this paper reports the recent study on 3D printing of nanoclay-incorporated double-network (NIDN) hydrogels for the fabrication of 1D filaments and 3D constructs without extra assistance of support bath. The frequently used "house-of-cards" architectures formed by nanoclay are disintegrated in the NIDN hydrogels. However, nanoclay can act as physical crosslinkers to interact with polymer chains of methacrylated hyaluronic acid (HAMA) and alginate (Alg), which endows the hydrogel precursors with good structural formability. Various straight filaments, spring-like loops, and complex 3D constructs with high shape-fidelity and good mechanical strength are fabricated successfully. In addition, the NIDN hydrogel system can easily be transformed into a new type of magnetic responsive hydrogel used for 3D printing. The NIDN hydrogels also supported the growth of bone marrow mesenchymal stem cells and displayed potential calvarial defect repair functions.

Hydrogel-based therapeutic angiogenesis: An alternative treatment strategy for critical limb ischemia

Critical limb ischemia (CLI) is the most severe clinical manifestation of peripheral arterial disease (PAD), resulting in the total or partial loss of limb function. Although the conventional treatment strategy of CLI (e.g., medical treatment and surgery) can improve blood perfusion and restore limb function, many patients are unsuitable for these strategies and they still face the threats of amputation or death. Therapeutic angiogenesis, as a potential solution for these problems, attempts to manipulate blood vessel growth in vivo for augment perfusion without the help of extra pharmaceutics and surgery. With the rise of interdisciplinary research, regenerative medicine strategies provide new possibilities for treating many clinical diseases. Hydrogel, as an excellent biocompatibility material, is an ideal candidate for delivering bioactive molecules and cells for therapeutic angiogenesis. Besides, hydrogel could precisely deliver, control release, and keep the bioactivity of cargos, making hydrogel-based therapeutic angiogenesis a new strategy for CLI therapy. In this review, we comprehensively discuss the approaches of hydrogel-based strategy for CLI treatment as well as their challenges, and future directions.

Efficient Surface Immobilization of Chemically Modified Hyaluronans for Enhanced Bioactivity and Survival of In Vitro-Cultured Embryonic Salivary Gland Mesenchymal Cells

Embryonic salivary gland mesenchyme (eSGM) secretes various growth factors (bioactives) that support the proper growth and differentiation of salivary gland epithelium. Therefore, eSGM cells can be used as feeder cells for in vitro-cultured artificial salivary gland if their survival and bioactivity are properly maintained. As eSGM is encapsulated in a hyaluronan (HA)-rich developmental milieu, we hypothesized that mimicking this environment in vitro via surface immobilization of HA might enhance survival and bioactivity of eSGM. In this study, various HA derivatives, conjugated with catechol (HA–CA), thiol (HA–SH), or amine (HA–EDA) moieties, respectively, were screened for their efficacy of culturing eSGM-derived feeder cells in vitro. Among these HA derivatives, HA–CA showed the highest surface coating efficiency and growth enhancement effect on the embryonic submandibular gland. In addition, the HA–CA coating enhanced the production of growth factors EGF and FGF7, but not FGF10. These effects were maintained when eSGM cells isolated from the embryonic salivary gland were re-seeded to develop the feeder layer cells. CD44s (a major HA receptor) in eSGM cells were clustered at the cell membrane, and enhanced EGF expression was detected only in CD44 cluster-positive cells, suggesting that membrane clustering of CD44 is the key mechanism for the increased expression of EGF.

Effects of a Catechol-Functionalized Hyaluronic Acid Patch Combined with Human Adipose-Derived Stem Cells in Diabetic Wound Healing

Introduction: Chronic inflammation and impaired neovascularization play critical roles in delayed wound healing in diabetic patients. To overcome the limitations of current diabetic wound (DBW) management interventions, we investigated the effects of a catechol-functionalized hyaluronic acid (HA-CA) patch combined with adipose-derived mesenchymal stem cells (ADSCs) in DBW mouse models. Methods: Diabetes in mice (C57BL/6, male) was induced by streptozotocin (50 mg/kg, >250 mg/dL). Mice were divided into four groups: control (DBW) group, ADSCs group, HA-CA group, and HA-CA + ADSCs group (n = 10 per group). Fluorescently labeled ADSCs (5 × 10⁵ cells/100 µL) were transplanted into healthy tissues at the wound boundary or deposited at the HA-CA patch at the wound site. The wound area was visually examined. Collagen content, granulation tissue thickness and vascularity, cell apoptosis, and re-epithelialization were assessed. Angiogenesis was evaluated by immunohistochemistry, quantitative real-time polymerase chain reaction, and Western blot. Results: DBW size was significantly smaller in the HA-CA + ADSCs group (8% ± 2%) compared with the control (16% ± 5%, p < 0.01) and ADSCs (24% ± 17%, p < 0.05) groups. In mice treated with HA-CA + ADSCs, the epidermis was regenerated, and skin thickness was restored. CD31 and von Willebrand factor-positive vessels were detected in mice treated with HA-CA + ADSCs. The mRNA and protein levels of VEGF, IGF-1, FGF-2, ANG-1, PIK, and AKT in the HA-CA + ADSCs group were the highest among all groups, although the Spred1 and ERK expression levels remained unchanged. Conclusions: The combination of HA-CA and ADSCs provided synergistic wound healing effects by maximizing paracrine signaling and angiogenesis via the PI3K/AKT pathway. Therefore, ADSC-loaded HA-CA might represent a novel strategy for the treatment of DBW.

Fast-Curing Mussel-Inspired Adhesive Derived from Vegetable Oil

The development of functional materials based on renewable resources is of great significance in today's resource shortage. Here, we present an effective way to synthesize a mussel-inspired adhesive from acrylated epoxidized soybean oil (AESO), a renewable and commercially available small molecular material with a molecular weight around 1200 Da, by a one-step esterification reaction with the affordable 3,4-dihydroxybenzoic acid (DHA). By taking advantages of both the double bond and the catechol moiety presented in this small molecular adhesive, a short curing time was achieved with UV irradiation. An average bonding strength around 1.4 MPa at a curing time of only around 10 min on a glass substrate was observed, which reached 3.1 MPa (average 2.8 MPa) at a curing time of 2 h under ambient conditions. The curing time is much shorter, and the bonding strength is obviously stronger than the conditions where conventional oxidation agents such as IO₄^- or oxidation/coordination agents such as Fe³⁺ are used as the curing agent. Furthermore, the AESO-g-DHA can be used as an underwater adhesive, and an appreciable bonding strength up to 0.64 MPa was observed, which is superior than most of currently known commercialized glues. Given that the adhesive could be synthesized from low-cost renewable resources in one step, it might be a potential candidate for large-scale practical application.

Tissue-Adhesive Chondroitin Sulfate Hydrogel for Cartilage Reconstruction

Chondroitin sulfate (CS), the main component of cartilage extracellular matrix, has attracted attention as a biomaterial for cartilage tissue engineering. However, current CS hydrogel systems still have limitations for application in successful cartilage tissue engineering owing to their unsuitable degradation kinetics, insufficient mechanical similarity, and lack of integration with the native cartilage tissue. In this study, using mussel adhesive-inspired catechol chemistry, we developed a functional CS hydrogel that exhibits tunable physical and mechanical properties as well as excellent tissue adhesion for efficient integration with native tissues. Various properties of the developed catechol-functionalized CS (CS-CA) hydrogel, including swelling, degradation, mechanical properties, and adhesiveness, could be tailored by varying the conjugation ratio of the catechol group to the CS backbone and the concentration of the CS-CA conjugates. CS-CA hydrogels exhibited significantly increased modulus (∼10 kPa) and superior adhesive properties (∼3 N) over conventional CS hydrogels (∼hundreds Pa and ∼0.05 N). In addition, CS-CA hydrogels incorporating decellularized cartilage tissue dice promoted the chondrogenic differentiation of human adipose-derived mesenchymal stem cells by providing a cartilage-like microenvironment. Finally, the transplantation of autologous cartilage dice using tissue-adhesive CS-CA hydrogels enhanced cartilage integration with host tissue and neo-cartilage formation owing to favorable physical, mechanical, and biological properties for cartilage formation. In conclusion, our study demonstrated the potential utility of the CS-CA hydrogel system in cartilage tissue reconstruction.

Regeneration of irradiation-damaged esophagus by local delivery of mesenchymal stem-cell spheroids encapsulated in a hyaluronic-acid-based hydrogel

Radiation therapy (RT) is a typical treatment for head and neck cancers. Generally, prolonged irradiation of the esophagus causes esophageal fibrosis due to increased reactive oxygen species and proinflammatory cytokines. This study was designed to determine whether catechol-functionalized hyaluronic acid (HA-CA) hydrogel-encapsulated human mesenchymal stem-cell spheroids (MSC-SPs) could ameliorate damage to the esophagus in a mouse model of radiation-induced esophageal fibrosis. MSC-SPs were cultured in concave microwells 600 μm in diameter at a cell density of 1 × 10⁶ cells per mL. Most cells formed spheroids with a 100-300 μm size distribution in concave microwells. MSC-SPs were well maintained in the HA gel, and live-dead staining confirmed that most cells survived. The HA gel containing the MSC-SPs was then injected into the damaged esophageal layer. Inflammatory signs or adverse tissue reactions were not observed after esophageal injection of HA-gel-encapsulated MSC-SPs. Based on Masson's trichrome staining at 4 and 12 weeks postinjection, the inner esophageal layer (IEL) was significantly thinner in the MSC-SP + HA gel group compared to those in the other experimental groups. While the saline and HA gel treatments made the esophageal muscles loose and thick, the MSC-SP + HA gel group showed bundles of tightly packed esophageal muscles, as assayed by desmin immunostaining. qPCR analysis showed that epithelial genes tended to increase over time in the MSC-SP + HA gel group, and the expression of most fibrosis-related genes decreased. This study proposes the potential of using HA-CA-hydrogel-encapsulated MSC-SPs as a promising therapy against radiation-induced esophageal fibrosis.

Magnetic Nanocomposite Hydrogels for Tissue Engineering: Design Concepts and Remote Actuation Strategies to Control Cell Fate

Most tissues of the human body are characterized by highly anisotropic physical properties and biological organization. Hydrogels have been proposed as scaffolding materials to construct artificial tissues due to their water-rich composition, biocompatibility, and tunable properties. However, unmodified hydrogels are typically composed of randomly oriented polymer networks, resulting in homogeneous structures with isotropic properties different from those observed in biological systems. Magnetic materials have been proposed as potential agents to provide hydrogels with the anisotropy required for their use on tissue engineering. Moreover, the intrinsic properties of magnetic nanoparticles enable their use as magnetomechanic remote actuators to control the behavior of the cells encapsulated within the hydrogels under the application of external magnetic fields. In this review, we combine a detailed summary of the main strategies to prepare magnetic nanoparticles showing controlled properties with an analysis of the different approaches available to their incorporation into hydrogels. The application of magnetically responsive nanocomposite hydrogels in the engineering of different tissues is also reviewed.

Polyphenol scaffolds in tissue engineering

Polyphenols are a class of ubiquitous compounds distributed in nature, with fascinating inherent biocompatible, bioadhesive, antioxidant, and antibacterial properties. The unique polyphenolic structures based on catechol or pyrogallol moieties allow for strong non-covalent interactions (e.g., multiple hydrogen bonding, electrostatic, and cation-π interactions) as well as covalent interactions (e.g., Michael addition/Schiff-base reaction, radical coupling reaction, and dynamic coordination interactions with boronate or metal ions). This review article provides an overview of the polyphenol-based scaffolds including the hydrogels, films, and nanofibers that have emerged from chemical and functional signatures during the past years. A full description of the structure-function relationships in terms of their utilization in wound healing, bone regeneration, and electroactive tissue engineering is also carefully discussed, which may pave the path towards the rational design and facile preparation of next-generation polyphenol scaffolds for tissue engineering applications.

Adhesive Catechol-Conjugated Hyaluronic Acid for Biomedical Applications: A Mini Review

Recently, catechol-containing polymers have been extensively developed as promising materials for surgical tissue adhesives, wound dressing, drug delivery depots, and tissue engineering scaffolds. Catechol conjugation to the polymer backbone provides adhesive properties to the tissue and does not significantly affect the intrinsic properties of the polymers. An example of a catecholic polymer is catechol-conjugated hyaluronic acid. In general, hyaluronic acid shows excellent biocompatibility and biodegradability; thus, it is used in various medical applications. However, hyaluronic acid alone has poor mechanical and tissue adhesion properties. Catechol modification considerably increases the mechanical and underwater adhesive properties of hyaluronic acid, while maintaining its biocompatibility and biodegradability and enabling its use in several biomedical applications. In this review, we briefly describe the synthesis and characteristics of catechol-modified hyaluronic acid, with a specific focus on catechol-involving reactions. Finally, we discuss the basic concepts and therapeutic effects of catechol-conjugated hyaluronic acid for biomedical applications.

Natural-Based Hydrogels for Tissue Engineering Applications

In the field of tissue engineering and regenerative medicine, hydrogels are used as biomaterials to support cell attachment and promote tissue regeneration due to their unique biomimetic characteristics. The use of natural-origin materials significantly influenced the origin and progress of the field due to their ability to mimic the native tissues' extracellular matrix and biocompatibility. However, the majority of these natural materials failed to provide satisfactory cues to guide cell differentiation toward the formation of new tissues. In addition, the integration of technological advances, such as 3D printing, microfluidics and nanotechnology, in tissue engineering has obsoleted the first generation of natural-origin hydrogels. During the last decade, a new generation of hydrogels has emerged to meet the specific tissue necessities, to be used with state-of-the-art techniques and to capitalize the intrinsic characteristics of natural-based materials. In this review, we briefly examine important hydrogel crosslinking mechanisms. Then, the latest developments in engineering natural-based hydrogels are investigated and major applications in the field of tissue engineering and regenerative medicine are highlighted. Finally, the current limitations, future challenges and opportunities in this field are discussed to encourage realistic developments for the clinical translation of tissue engineering strategies.

Rational design of hydrogels to enhance osteogenic potential

Bone tissue engineering (BTE) encompasses the field of biomaterials, cells, and bioactive molecules to successfully guide the growth and repair of bone tissue. Current BTE strategies rely on delivering osteogenic molecules or cells via scaffolding materials. However, growth factor- and stem cell-based treatments have several limitations, such as source restriction, low stability, difficulties in predicting long-term efficacy, and high costs, among others. These issues have promoted the development of material-based therapy with properties of accessibility, high stability, tunable efficacy, and low-cost production. Hydrogels are widely used in BTE applications because of their unique hydrophilic nature and tunable physicochemical properties to mimic the native bone environment. However, current hydrogel materials are not ideal candidates due to minimal osteogenic capability on their own. Therefore, recent studies of BTE hydrogels attempt to counterbalance these issues by modifying their biophysical properties. In this article, we review recent progress in the design of hydrogels to instruct osteogenic potential, and present strategies developed to precisely control its bone healing properties.

Bioadhesive hydrogels demonstrating pH-independent and ultrafast gelation promote gastric ulcer healing in pigs

Hydrogels are soft materials used in an array of biomedical applications. However, the in situ formation of hydrogels at target sites, particularly in dynamic in vivo environments, usually requires a prolonged gelation time and results in poor adhesion. These limitations cause considerable loss of both hydrogel mass and encapsulated therapeutic cargoes, thereby compromising treatment outcomes. Here, we report the development of a hydrogel based on thiourea-catechol reaction to enhance the bioadhesion. Compared with classical bioadhesive hydrogels, our hydrogels show enhanced mechanical properties, exceedingly short curing time, and pH-independent gelation with a much lower oxidant concentration. We further report the robust adhesion of our hydrogels to acidic gastric tissues and easy delivery to the porcine stomach via endoscopy. The delivered hydrogels adhered to ulcer sites in vivo for at least 48 hours. Hydrogel treatment of gastric ulcers in rodent and porcine models accelerated ulcer healing by suppressing inflammation and promoting re-epithelization and angiogenesis. The improved retention of proregenerative growth factors and reduced exposure to external catabolic factors after hydrogel application may contribute to the observed therapeutic outcomes. Our findings reveal a promising biomaterial-based approach for treating gastrointestinal diseases.

Evolutionarily conserved sequence motif analysis guides development of chemically defined hydrogels for therapeutic vascularization

Biologically active ligands (e.g., RGDS from fibronectin) play critical roles in the development of chemically defined biomaterials. However, recent decades have shown only limited progress in discovering novel extracellular matrix-protein-derived ligands for translational applications. Through motif analysis of evolutionarily conserved RGD-containing regions in laminin (LM) and peptide-functionalized hydrogel microarray screening, we identified a peptide (a1) that showed superior supports for endothelial cell (EC) functions. Mechanistic studies attributed the results to the capacity of a1 engaging both LM- and Fn-binding integrins. RNA sequencing of ECs in a1-functionalized hydrogels showed ~60% similarities with Matrigel in "vasculature development" gene ontology terms. Vasculogenesis assays revealed the capacity of a1-formulated hydrogels to improve EC network formation. Injectable alginates functionalized with a1 and MMPQK (a vascular endothelial growth factor-mimetic peptide with a matrix metalloproteinase-degradable linker) increased blood perfusion and functional recovery over decellularized extracellular matrix and (RGDS + MMPQK)-functionalized hydrogels in an ischemic hindlimb model, illustrating the power of this approach.

Dopamine-Modified Hyaluronic Acid Hydrogel Adhesives with Fast-Forming and High Tissue Adhesion

Commercial or clinical tissue adhesives are currently limited due to their weak bonding strength on wet biological tissue surface, low biological compatibility, and slow adhesion formation. Although catechol-modified hyaluronic acid (HA) adhesives are developed, they suffer from limitations: insufficient adhesiveness and overfast degradation, attributed to low substitution of catechol groups. In this study, we demonstrate a simple and efficient strategy to prepare mussel-inspired HA hydrogel adhesives with improved degree of substitution of catechol groups. Because of the significantly increased grafting ratio of catechol groups, dopamine-conjugated dialdehyde-HA (DAHA) hydrogels exhibit excellent tissue adhesion performance (i.e., adhesive strength of 90.0 ± 6.7 kPa), which are significantly higher than those found in dopamine-conjugated HA hydrogels (∼10 kPa), photo-cross-linkable HA hydrogels (∼13 kPa), or commercially available fibrin glues (2-40 kPa). At the same time, their maximum adhesion energy is 384.6 ± 26.0 J m^-2, which also is 40-400-fold, 2-40-fold, and ∼8-fold higher than those of the mussel-based adhesive, cyanoacrylate, and fibrin glues, respectively. Moreover, the hydrogels can gel rapidly within 60 s and have a tunable degradation suitable for tissue regeneration. Together with their cytocompatibility and good cell adhesion, they are promising materials as new biological adhesives.

Hyaluronic Acid and Regenerative Medicine: New Insights into the Stroke Therapy

Stroke is known as one of the very important public health problems that are related to societal burden and tremendous economic losses. It has been shown that there are few therapeutic approaches for the treatment of this disease. In this regard, the present therapeutic platforms aim to obtain neuroprotection, reperfusion, and neuro recovery. Among these therapies, regenerative medicine-based therapies have appeared as new ways of stroke therapy. Hyaluronic acid (HA) is a new candidate, which could be applied as a regenerative medicine-based therapy in the treatment of stroke. HA is a glycosaminoglycan composed of disaccharide repeating elements (N-acetyl-Dglucosamine and D-glucuronic acid). Multiple lines of evidence demonstrated that HA has critical roles in normal tissues. It can be a key player in different physiological and pathophysiological conditions such as water homeostasis, multiple drug resistance, inflammatory processes, tumorigenesis, angiogenesis, and changed viscoelasticity of the extracellular matrix. HA has very important physicochemical properties i.e., availability of reactive functional groups and its solubility, which make it a biocompatible material for application in regenerative medicine. Given that HAbased bioscaffolds and biomaterials do not induce inflammation or allergies and are hydrophilic, they are used as soft tissue fillers and injectable dermal fillers. Several studies indicated that HA could be employed as a new therapeutic candidate in the treatment of stroke. These studies documented that HA and HA-based therapies exert their pharmacological effects via affecting stroke-related processes. Herein, we summarized the role of the extracellular matrix in stroke pathogenesis. Moreover, we highlighted the HA-based therapies for the treatment of stroke.