Fabrication of pH-Responsive Nanoparticles with an AIE Feature for Imaging Intracellular Drug Delivery

Synthesis, characterization, and evaluation of the anticancer properties of pH-responsive carvacrol-zinc oxide quantum dots on breast cancer cell line (MDA-MB-231)

Since most solid tumors have a low pH value, a pH-responsive drug delivery system may offer a broad method for tumor-targeting treatment. The present study is used to analyze the anticancer activity of carvacrol-zinc oxide quantum dots (CVC-ZnO QDs) against breast cancer cells (MDA-MB-231). CVC-ZnO QDs demonstrate pH responsive and are specifically released within the acidic pH tumor microenvironment. This property enables targeted drug delivery exclusively to cancer cells while minimizing the impact on normal cells. To the synthesized ZnO QDs, the CVC was loaded and then examined by X-ray diffraction, ultraviolet-visible, Fourier transform infrared spectrophotometer, scanning electron microscopy-energy dispersive X-ray, and transmission electron microscopy. For up to 20 h, CVC release was examined in different pH-buffered solutions. The results showed that carvacrol release was stable in an acidic pH solution. Further, cytotoxicity assay, antioxidant, and lipid peroxidation activity, reactive oxygen species, mitochondrial membrane potential, nuclear damage, and the ability of CVC-ZnO QDs to cause apoptosis were all examined. Apoptosis markers such as Bcl2, Bax, caspase-3, and caspase-9, were also studied. In conclusion, the CVC-ZnO QDs destabilized the MDA-MB-231cells under its acidic tumor microenvironment and regulated apoptosis.

TPE-based fluorescent probe for dual channel imaging of pH/viscosity and selective visualization of cancer cells and tissues

The development of efficient fluorescence-based detection tools with high contrast and accuracy in cancer diagnosis has recently attracted extensive attention. Changes in the microenvironments between cancer and normal cells provide new biomarkers for precise and comprehensive cancer diagnosis. Herein, a dual-organelle-targeted probe with multiple-parameter response is developed to realize cancer detection. We designed a tetraphenylethylene (TPE)-based fluorescent probe TPE-PH-KD connected with quinolinium group for simultaneous detection of viscosity and pH. Due to the restriction on the double bond's rotation, the probe respond to viscosity changes in the green channel with extreme sensitivity. Interestingly, the probe exhibited strong emission of red channel in acidic environment, and the rearrangement of ortho-OH group occurred in the basic form with weak fluorescence when pH increased. Additionally, cell colocalization studies revealed that the probe was located in the mitochondria and lysosome of cancer cells. Following treatment with carbonyl cyanide m-chloro phenylhydrazone (CCCP), chloroquine, and nystatin, the pH or viscosity changes in the dual channels are also monitored in real-time. Furthermore, the probe TPE-PH-KD could effectively discriminate cancer from normal cells and organs with high-contrast fluorescence imaging, which sparked more research on an efficient tool for highly selectively visualizing tumors at the organ level.

Multifunctional Nanoprobe Based on Fluorescence Resonance Energy Transfer for Furin Detection and Drug Delivery

Triple-negative breast cancer is particularly difficult to treat because of its high degree of malignancy and poor prognosis. A fluorescence resonance energy transfer (FRET) nanoplatform plays a very important role in disease diagnosis and treatment due to its unique detection performance. Combining the properties of agglomeration-induced emission fluorophore and FRET pair, a FRET nanoprobe (HMSN/DOX/RVRR/PAMAM/TPE) induced by specific cleavage was designed. First, hollow mesoporous silica nanoparticles (HMSNs) were used as drug carriers to load doxorubicin (DOX). HMSN nanopores were coated with the RVRR peptide. Then, polyamylamine/phenylethane (PAMAM/TPE) was combined in the outermost layer. When Furin cut off the RVRR peptide, DOX was released and adhered to PAMAM/TPE. Finally, the TPE/DOX FRET pair was constituted. The overexpression of Furin in the triple-negative breast cancer cell line (MDA-MB-468 cell) can be quantitatively detected by FRET signal generation, so as to monitor cell physiology. In conclusion, the HMSN/DOX/RVRR/PAMAM/TPE nanoprobes were designed to provide a new idea for the quantitative detection of Furin and drug delivery, which is conducive to the early diagnosis and treatment of triple-negative breast cancer.

Mechanically Robust Hydrogels Facilitating Bone Regeneration through Epigenetic Modulation

Development of artificial biomaterials by mimicking extracellular matrix of bone tissue is a promising strategy for bone regeneration. Hydrogel has emerged as a type of viable substitute, but its inhomogeneous networks and weak mechanics greatly impede clinical applications. Here, a dual crosslinked gelling system is developed with tunable architectures and mechanics to promote osteogenic capacity. Polyhedral oligomeric silsesquioxane (POSS) is designated as a rigid core surrounded by six disulfide-linked PEG shells and two 2-ureido-4[1H]-pyrimidinone (UPy) groups. Thiol-disulfide exchange is employed to fabricate chemical network because of the pH-responsive "on/off" function. While self-complementary UPy motif is capable of optimizing local microstructure to enhance mechanical properties. Taking the merits of biocompatibility and high-mechanics in periodontal ligament stem cells (PDLSCs) proliferation, attachment, and osteogenesis, hybrid hydrogel exhibits outstanding osteogenic potential both in vitro and in vivo. Importantly, it is the first time that a key epigenetic regulator of ten-eleven translocation 2 (Tet2) is discovered to significantly elevate the continuously active the WNT/β-catenin through Tet2/HDAC1/E-cadherin/β-catenin signaling cascade, thereby promoting PDLSCs osteogenesis. This work represents a general strategy to design the hydrogels with customized networks and biomimetic mechanics, and illustrates underlying osteogenic mechanisms that will extend the design rationales for high-functional biomaterials in tissue engineering.

The in vivo fate of polymeric micelles

This review aims to provide a systemic analysis of the in vivo, as well as subcellular, fate of polymeric micelles (PMs), starting from the entry of PMs into the body. Few PMs are able to cross the biological barriers intact and reach the circulation. In the blood, PMs demonstrate fairly good stability mainly owing to formation of protein corona despite controversial results reported by different groups. Although the exterior hydrophilic shells render PMs "long-circulating", the biodistribution of PMs into the mononuclear phagocyte systems (MPS) is dominant as compared with non-MPS organs and tissues. Evidence emerges to support that the copolymer poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) is first broken down into pieces of PEG and PLA and then remnants to be eliminated from the body finally. At the cellular level, PMs tend to be internalized via endocytosis due to their particulate nature and disassembled and degraded within the cell. Recent findings on the effect of particle size, surface characteristics and shape are also reviewed. It is envisaged that unraveling the in vivo and subcellular fate sheds light on the performing mechanisms and gears up the clinical translation of PMs.

Intelligent design of polymersomes for antibacterial and anticancer applications

Polymersomes (or polymer vesicles) have attracted much attention for biomedical applications in recent years because their lumen can be used for drug delivery and their coronas and membrane can be modified with a variety of functional groups. Thus, polymersomes are very suitable for improved antibacterial and anticancer therapy. This review mainly highlighted recent advances in the synthetic protocols and design principles of intelligent antibacterial and anticancer polymersomes. Antibacterial polymersomes are divided into three categories: polymersomes as antibiotic nanocarriers, intrinsically antibacterial polymersomes, and antibacterial polymersomes with supplementary means including photothermal and photodynamic therapy. Similarly, the anticancer polymersomes are divided into two categories: polymersomes-based delivery systems and anticancer polymersomes with supplementary means. In addition, the bilateral relationship between bacteria and cancer is addressed, since more and more evidences show that bacteria may cause cancer or promote cancer progression. Finally, prospective on next-generation antibacterial and anticancer polymersomes are discussed. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Biology-Inspired Nanomaterials > Lipid-Based Structures.

Recent Advances in Aggregation-Induced Emission Active Materials for Sensing of Biologically Important Molecules and Drug Delivery System

The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. In this review, we have discussed insights and explored recent advances that are being made in AIE active materials and their application in sensing, biological cell imaging, and drug delivery systems, and, furthermore, we explored AIE active fluorescent material as a building block in supramolecular chemistry. Herein, we focus on various AIE active molecules such as tetraphenylethylene, AIE-active polymer, quantum dots, AIE active metal-organic framework and triphenylamine, not only in terms of their synthetic routes but also we outline their applications. Finally, we summarize our view of the construction and application of AIE-active molecules, which thus inspiring young researchers to explore new ideas, innovations, and develop the field of supramolecular chemistry in years to come.

Aggregation-induced emission (AIE)-guided dynamic assembly for disease imaging and therapy

The phenomenon of aggregation-induced emission (AIE) is inseparable from molecular aggregation and self-assembly. Therefore, the combination of AIE and supramolecular self-assembly is well-matched. AIE-guided dynamic assembly (AGDA) could effectively respond to the endogenous stimuli (such as pH, enzymes, redox molecules) and exogenous stimuli (temperature, light, ultrasound) in the disease microenvironment, so as to achieve specific imaging and diagnosis of the disease lesions. Moreover, AGDA also dynamically adjust the intramolecular motions of AIE molecules, thereby adjusting the energy dissipation pathways and realizing the switch between photodynamic therapy and photothermal therapy for superior therapeutic effects. In this review, we aim to give an overview of the constructing strategies, stimuli-responsive imaging, regulation of intramolecular motion of AGDA in recent years, which is expected to grasp the research status and striving directions of AGDA for imaging and therapy.

A novel near-infrared viscosity probe based on synergistic effect of AIE property and molecular rotors for mitophagy imaging during liver injury

Mitophagy, a specialized form of autophagy, holds the key to cellular metabolism and physiology. Viscosity is a significant marker for visualization of the mitophagy process in real-time. Hence, development of well-performing viscosity probe is beneficial to study mitophagy-related dynamic physiological and pathological processes. Here, a new strategy was proposed by combination of AIE property and molecular rotors to design novel viscosity probe. The probe named TPA-Py was obtained by Knoevenagel condensation reaction of AIE unit and pyridine salt, which giving the probe excellent near-infrared emission, good water-solubility and mitochondrial targeting ability. Most importantly, TPA-Py owns two rotatable parts of triphenylamine and double bond, enabling the probe to equip with AIE property and sensitive recognition units for viscosity. With the environmental viscosity increasing, the rotation of the molecular rotor and the AIE unit is restricted effectively, the probe displayed strong fluorescence. Then, TPA-Py was successfully employed for monitoring the mitophagy process in A549 cells by imaging viscosity alterations. As mitophagy constitutes an important consideration in the pathogenesis of drug-induced liver injury, TPA-Py was also applied to explore the variation of viscosity in production and remediation pathways of APAP-induced liver injury. These results demonstrated that TPA-Py was a highly sensitive viscosity probe which holds great potential of biological applications.

PEGylated Doxorubicin Prodrug-Forming Reduction-Sensitive Micelles With High Drug Loading and Improved Anticancer Therapy

Significant efforts on the design and development of advanced drug delivery systems for targeted cancer chemotherapy continue to be a major challenge. Here, we reported a kind of reduction-responsive PEGylated doxorubicin (DOX) prodrug via the simple esterification and amidation reactions, which self-assembled into the biodegradable micelles in solutions. Since there was an obvious difference in the reduction potentials between the oxidizing extracellular milieu and the reducing intracellular fluids, these PEG-disulfide-DOX micelles were localized intracellularly and degraded rapidly by the stimulus to release the drugs once reaching the targeted tumors, which obviously enhanced the therapeutic efficacy with low side effects. Moreover, these reduction-sensitive micelles could also physically encapsulate the free DOX drug into the polymeric cargo, exhibiting a two-phase programmed drug release behavior. Consequently, it showed a potential to develop an intelligent and multifunctional chemotherapeutic payload transporter for the effective tumor therapy.

AIE active polymers for biological applications

The discovery of aggregation-induced emission (AIE) phenomenon, significantly altered the understanding of the scientific world about the luminophore aggregation. Polymers with AIE features have recently emerged as promising materials with wide range of applications in optoelectronics devices, chemosensors, bioimaging, cancer theranostics and drug delivery. By introducing the AIE active molecule into the polymer structure, novel materials encompassing the characteristics properties of both the functional materials such as excellent brightness, versatile structure modification, high biocompatibility, exceptional stability and facile processability are achieved. This chapter presents the advances in synthetic design as well as potential biological applications of AIE active polymers, beginning with a brief introduction to the AIE phenomenon. The versatile synthetic route, easier functionalization, and light up feature of the AIE active polymers offer direct visualization of the physiological processes within or outside the living organisms. This chapter also precisely describes the photodynamic therapy/photothermal therapy (PDT/PTT) with up-to-date advancement of AIE active polymer and their emerging applications in biomedical field. The AIE active Photosensitizers (PSs) are much more efficient in singlet oxygen (¹O₂) production than their small molecule AIE active PSs due to their enhanced inter system crossing (ISC) process and improved light-harvesting ability. Additionally, the present chapter aims to focus on all recent AIE active polymers for drug screening and drug delivery. The AIE active polymer often shows decent drug loading capacity, high stability and good biocompatibility comprising image guided drug monitoring features. Lastly, the concluding discussion reveals the future prospective of the AIE active polymers.

Advances of Hydrogel-Based Bioprinting for Cartilage Tissue Engineering

Bioprinting has gained immense attention and achieved the revolutionized progress for application in the multifunctional tissue regeneration. On account of the precise structural fabrication and mimicking complexity, hydrogel-based bio-inks are widely adopted for cartilage tissue engineering. Although more and more researchers have reported a number of literatures in this field, many challenges that should be addressed for the development of three-dimensional (3D) bioprinting constructs still exist. Herein, this review is mainly focused on the introduction of various natural polymers and synthetic polymers in hydrogel-based bioprinted scaffolds, which are systematically discussed via emphasizing on the fabrication condition, mechanical property, biocompatibility, biodegradability, and biological performance for cartilage tissue repair. Further, this review describes the opportunities and challenges of this 3D bioprinting technique to construct complex bio-inks with adjustable mechanical and biological integrity, and meanwhile, the current possible solutions are also conducted for providing some suggestive ideas on developing more advanced bioprinting products from the bench to the clinic.

Dual responsive dextran-graft-poly (N-isopropylacrylamide)/doxorubicin prodrug via Schiff base reaction

Stimulus-responsive nanoparticles stand out in studies for cancer treatment since these systems can promote a selective release of the drug in tumor tissues and cells, minimizing the effects caused by conventional chemotherapy. Dextran-graft-poly (N-isopropylacrylamide) copolymers were synthesized via Schiff base formation. The synthesis of copolymers was confirmed by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (NMR) and the analyses of dynamic light scattering (DLS) showed that the copolymers were thermal and pH dual-responsive. The chemotherapy drug doxorubicin (DOX) was conjugated to the copolymers via Schiff base formation, obtaining nanoparticles by self-assembling with size smaller than 130 nm. A higher percentage of doxorubicin was released at pH 5.0 (59.1 ± 2.1%) compared to physiological pH (34.9 ± 4.8%), confirming a pH-sensitive release profile. The in vitro cytotoxicity assay demonstrated that DOX-loaded nanoparticles can inhibit cancer cell proliferation and promote reduced cytotoxicity in non-tumor cells. The D_45kP_30k-DOX nanoparticles induced morphological changes in HCT-116 cells suggesting cell death and the cell uptake assay indicated that the nanoparticles can be internalized by endocytosis. Therefore, DOX-loaded nanoparticles exhibited potential as smart systems for cancer treatment.

Amphiphilic alginate-based fluorescent polymer nanoparticles: Fabrication and multifunctional applications

Alginate has been widely applied in various biological systems due to its great biocompatibility. Endowing it fluorescent imaging would make people to further understand its complex structure, process and mechanism. In this work, amphiphilic alginate conjugated with aggregation-induced emission (AIE) moiety fluorescent polymer was successfully fabricated through the Ugi one-pot condensation. The synthetic polymer particles were fully evaluated by various characterizations including ¹H NMR, FTIR, fluorescent spectroscopies, and transmission electron microscopy (TEM). These amphiphilic alginate particles showed great multicolor fluorescence emission in both solid and solution states. The corresponding biological evaluation results confirmed that the fluorescent biopolymer showed excellent biocompatibility and desirable bioimaging property. Particularly, the leaf stomata were directly visualized using the amphiphilic AIE-active alginate biopolymer. Furthermore, the alginate-based polymer can also be employed as the drug carrier for hydrophobic curcumin. These results indicated that our synthetic AIE-active alginate particles might provide great potential for the further utilization of alginate in the understanding of various relative biological systems.

The Role of Tumor Inflammatory Microenvironment in Lung Cancer

Lung cancer is the most common and fatal malignant tumor in the world. The tumor microenvironment (TME) is closely related to the occurrence and development of lung cancer, in which the inflammatory microenvironment plays an important role. Inflammatory cells and inflammatory factors in the tumor inflammatory microenvironment promote the activation of the NF-κB and STAT3 inflammatory pathways and the occurrence, development, and metastasis of lung cancer by promoting immune escape, tumor angiogenesis, epithelial-mesenchymal transition, apoptosis, and other mechanisms. Clinical and epidemiological studies have also shown a strong relationship among chronic infection, inflammation, inflammatory microenvironment, and lung cancer. The relationship between inflammation and lung cancer can be better understood through the gradual understanding of the tumor inflammatory microenvironment, which is advantageous to find more therapeutic targets for lung cancer.

Schiff-Linked PEGylated Doxorubicin Prodrug Forming pH-Responsive Nanoparticles With High Drug Loading and Effective Anticancer Therapy

Developing efficacious drug delivery systems for targeted cancer chemotherapy remains a major challenge. Here we demonstrated a kind of pH-responsive PEGylated doxorubicin (DOX) prodrug via the effective esterification and Schiff base reactions, which could self-assemble into the biodegradable micelles in aqueous solutions. Owing to low pH values inside the tumor cells, these PEG-Schiff-DOX nanoparticles exhibited high drug loading ability and pH-responsive drug release behavior within the tumor cells or tissues upon changes in physical and chemical environments, but they displayed good stability at physiological conditions for a long period. CCK-8 assay showed that these PEGylated DOX prodrugs had a similar cytotoxicity to the MCF-7 tumor cells as the free DOX drug. Moreover, this kind of nanoparticle could also encapsulate small DOX drugs with high drug loading, sufficient drug release and enhanced therapeutic effects toward MCF-7 cells, which will be benefited for developing more drug carriers with desirable functions for clinical anticancer therapy.

Using High Molecular Precision to Study Enzymatically Induced Disassembly of Polymeric Nanocarriers: Direct Enzymatic Activation or Equilibrium-Based Degradation?

Enzyme-responsive polymers and their assemblies offer great potential to serve as key materials for the design of drug delivery systems and other biomedical applications. However, the utilization of enzymes to trigger the disassembly of polymeric amphiphiles, such as micelles, also suffers from the limited accessibility of the enzyme to moieties that are hidden inside the assembled structures. In this Perspective, we will discuss examples for the utilization of high molecular precision that dendritic structures offer to study the enzymatic degradation of polymeric amphiphiles with high resolution. Up to date, several different amphiphilic systems based on dendritic blocks have all shown that small changes in the hydrophobicity and amphiphilicity strongly affected the degree and rate of enzymatic degradation. The ability to observe the huge effects due to relatively small variations in the molecular structure of polymers can explain the limited enzymatic degradation that is often observed for many reported polymeric assemblies. The observed trends imply that the enzymes cannot reach the hydrophobic core of the micelles, and instead, they gain access to the amphiphiles by the unimer–micelle equilibrium, making the unimer exchange rate a key parameter in tuning the enzymatic degradation rate. Several approaches that are aimed at overcoming the stability–responsiveness challenge are discussed as they open the way to the design of stable and yet enzymatically responsive polymeric nanocarriers.

A mechanistic insight into benefits of aggregation induced emissive luminogens in cancer

Exploration of advanced chemotheranostics that benefit from a combined in vivo strategy of cancer diagnosis and chemotherapy simultaneously is highly valued and will expose novel possibilities in modifying treatment and reduce side effects. In recent years, nanodrug delivery systems that incorporate aggregation-induced emissive luminogens (AIEgens) have been developed to track and monitor anticancer drug release, trace translocation processes and predict chemotherapeutic responses. There are several classes of AIEgen based chemotheranostics such us stimuli-responsive nanoprodrugs, pH-sensitive mesoporous silica nanocarriers, supramolecular polymer systems, drug encapsulated carriers, carrier-free nanodrugs, self-indicating drug delivery nanomachines and AIEgen-prodrug co-assembly. The present review conveys mechanistic insight into the benefits of AIEgens in the theranostic application by illustrating the recent breakthroughs in chemotheranostic nanomedicines that incorporate these unique fluorophores as signal reporters. The perspectives that can be further explored are also highlighted with the hope to instil more research interest in the advancement of AIE active cancer chemotheranostics for imaging and treatment in vivo.HIGHLIGHTSAggregation induced emissive materials (AIEgens) exhibit unique advantages over conventional luminogens for synergistic diagnosis and chemotherapy of cancer in vivo.The combination of AIE and nanotechnology offers an excellent platform to fabricate advanced chemotheranostics for cancer therapy.

Clustering-triggered emission of poly(vinyl) alcohol

PVA can emit blue light under UV light and the mechanism of this fluorescence was studied in this paper. PVA can be added to other materials to broaden their properties. The fluorescence of PVA has great application prospects.

Nanomaterials with Supramolecular Assembly Based on AIE Luminogens for Theranostic Applications

One of the major pursuits of biomedical science is to develop advanced strategies for theranostics, which is expected to be an effective approach for achieving the transition from conventional medicine to precision medicine. Supramolecular assembly can serve as a powerful tool in the development of nanotheranostics with accurate imaging of tumors and real-time monitoring of the therapeutic process upon the incorporation of aggregation-induced emission (AIE) ability. AIE luminogens (AIEgens) will not only enable fluorescence imaging but will also aid in improving the efficacy of therapies. Furthermore, the fluorescent signals and therapeutic performance of these nanomaterials can be manipulated precisely owing to the reversible and stimuli-responsive characteristics of the supramolecular systems. Inspired by rapid advances in this field, recent research conducted on nanotheranostics with the AIE effect based on supramolecular assembly is summarized. Here, three representative strategies for supramolecular nanomaterials are presented as follows: a) supramolecular self-assembly of AIEgens, b) the loading of AIEgens within nanocarriers with supramolecular assembly, and c) supramolecular macrocycle-guided assembly via host-guest interactions. Meanwhile, the diverse applications of such nanomaterials in diagnostics and therapeutics have also been discussed in detail. Finally, the challenges of this field are listed in this review.

Recent Advances of Chitosan-Based Injectable Hydrogels for Bone and Dental Tissue Regeneration

Traditional strategies of bone repair include autografts, allografts and surgical reconstructions, but they may bring about potential hazard of donor site morbidity, rejection, risk of disease transmission and repetitive surgery. Bone tissue engineering (BTE) is a multidisciplinary field that offers promising substitutes in biopharmaceutical applications, and chitosan (CS)-based bone reconstructions can be a potential candidate in regenerative tissue fields owing to its low immunogenicity, biodegradability, bioresorbable features, low-cost and economic nature. Formulations of CS-based injectable hydrogels with thermo/pH-response are advantageous in terms of their high-water imbibing capability, minimal invasiveness, porous networks, and ability to mold perfectly into an irregular defect. Additionally, CS combined with other naturally-derived or synthetic polymers and bioactive agents has proven to be an effective alternative to autologous bone and dental grafts. In this review, we will highlight the current progress in the development of preparation methods, physicochemical properties and applications of CS-based injectable hydrogels and their perspectives in bone and dental regeneration. We believe this review is intended as starting point and inspiration for future research effort to develop the next generation of tissue-engineering scaffold materials.

Cationic Peptidopolysaccharide with an Intrinsic AIE Effect for Combating Bacteria and Multicolor Imaging

An antibacterial polymer peptidopolysaccharide (COS-AMP) that integrates antibacterial and detection functions is constructed with a simple synthetic method. The COS-AMP is constructed by simulating the structure of peptidoglycan of the bacterial cell wall with chitooligosaccharide with intrinsic aggregation-induced emission (AIE) effect as the main chain, as well as a peptide polymer grafted onto its amino group. Based on the AIE effect and excitation-dependent fluorescence of COS-AMP, it is tentatively applied to multicolor imaging and quantification of bacteria. This multicolor imaging helps to match different excitation sources of fluorescent instrument for straightforward imaging and detection. The structural similarity with the bacterial cell wall component facilitates the passage of COS-AMP across the cell wall and destroys the bacterial structure, thus it has a good broad-spectrum antibacterial activity. In addition, aromatic fluorophores are not needed, and excellent biocompatibility will make it have broad application prospects.

Advances of Naturally Derived and Synthetic Hydrogels for Intervertebral Disk Regeneration

Intervertebral disk (IVD) degeneration is associated with most cases of cervical and lumbar spine pathologies, amongst which chronic low back pain has become the primary cause for loss of quality-adjusted life years. Biomaterials science and tissue engineering have made significant progress in the replacement, repair and regeneration of IVD tissue, wherein hydrogel has been recognized as an ideal biomaterial to promote IVD regeneration in recent years. Aspects such as ease of use, mechanical properties, regenerative capacity, and their applicability as carriers for regenerative and anti-degenerative factors determine their suitability for IVD regeneration. This current review provides an overview of naturally derived and synthetic hydrogels that are related to their clinical applications for IVD regeneration. Although each type has its own unique advantages, it rarely becomes a standard product in truly clinical practice, and a more rational design is proposed for future use of biomaterials for IVD regeneration. This review aims to provide a starting point and inspiration for future research work on development of novel biomaterials and biotechnology.

A novel triphenylamine-based bis-Schiff bases fluorophores with AIE-Activity as the hydrazine fluorescence turn-off probes and cell imaging in live cells

Developing a specific and sensitive method for endogenous hydrazine detection in living systems is valuable to understand its various pathological events. In this work, two novel fluorescent chemosensors (C1, C3) based on triphenylamine Schiff-base derivative and reference dyes (C2, C4) were prepared in relatively high yield (more than 72% yield). The aggregation induced emission (AIE) properties of sensors were investigated through UV-Visible, dynamic light scattering, X-ray diffraction, fluorescence spectrophotometric analyses as well as scanning electron microscope images (SEM). The results indicated that probes C1 and C3 exhibited strong AIE property in DMF/H₂O (1:1, v/v) mixture system with brilliant yellow fluorescence emission (560 nm) observed under 365 nm UV lamp. The experiments of sensing indicated that probes C1 and C3 possessed the sequentially detecting abilities for hydrazine with high sensitivity, specificity as well as an extremely low detection limit (55.1 nM), which was due to blocking of AIE process of probes C1 and C3 by special chemical reaction (-CHN- moiety transformed into -CH₂-NH- group) after hydrazine addition, resulting in the increase in water solubility and a weak emission in aqueous media. Furthermore, ¹H NMR, SEM and fluorescence titration experiment was also conducted to confirm the sensing mechanism. For biological application, probes C1 and C3 presented a good bio-imaging performance and showed the similar fluorescence quenching after adding hydrazine. Therefore, the probes are suitable for the fluorescence imaging of exogenous hydrazine in HeLa cells.

Supramolecular materials based on AIE luminogens (AIEgens): construction and applications

The emergence of aggregation-induced emission luminogens (AIEgens) has significantly stimulated the development of luminescent supramolecular materials because their strong emissions in the aggregated state have resolved the notorious obstacle of the aggregation-caused quenching (ACQ) effect, thereby enabling AIEgen-based supramolecular materials to have a promising prospect in the fields of luminescent materials, sensors, bioimaging, drug delivery, and theranostics. Moreover, in contrast to conventional fluorescent molecules, the configuration of AIEgens is highly twisted in space. Investigating AIEgens and the corresponding supramolecular materials provides fundamental insights into the self-assembly of nonplanar molecules, drastically expands the building blocks of supramolecular materials, and pushes forward the frontiers of supramolecular chemistry. In this review, we will summarize the basic concepts, seminal studies, recent trends, and perspectives in the construction and applications of AIEgen-based supramolecular materials with the hope to inspire more interest and additional ideas from researchers and further advance the development of supramolecular chemistry.

An Injectable and Instant Self-Healing Medical Adhesive for Wound Sealing

Designing versatile functional medical adhesives with injectability, self-healing, and strong adhesion is of great significance to achieve desirable therapeutic effects for promoting wound sealing in healthcare. Herein, a self-healing injectable adhesive is fabricated by physical interaction of polyphenol compound tannic acid (TA) and eight-arm poly(ethylene glycol) end-capped with succinimide glutarate active ester (PEG-SG). The hydrogen bonding induced from the structural unit (-CH₂-CH₂-O-) of PEG and catechol hydroxyl (-OH) of TA, accompanied by ester exchange between N-hydroxysuccinimide (-NHS) and amino (-NH₂) of proteins, contributes to self-healing ability and rapid strong adhesion. Notably, the PEG/TA adhesive can repeatedly adhere to rigid porcine tissues, close the coronary artery under a large incision tension, and bear a heavy load of 2 kg. By exhibiting shear-thinning and anti-swelling properties, the PEG/TA adhesive can be easily applied through single-syringe extrusion onto various wounds. The single-channel toothpaste-like feature of the adhesive ensures its storage hermetically for portable usage. Moreover, in vivo operation and histological H&E staining results indicate that the PEG/TA adhesive greatly accelerates wound healing and tissue regeneration in a rat model. With the specialty of injectability, instant self-healing, and long-lasting strong adhesion to facilitate excellent therapeutic effects, the multifunctional PEG/TA adhesive may provide a new alternative for self-rescue and surgical situations.

pH-responsive polymeric nanoparticles with tunable sizes for targeted drug delivery

Novel nanoparticles for efficient drug delivery were designed and constructed using polymeric 2,3-dialdehyde cellulose (DAC). The drug DOX was encapsulated into nanoparticles and underwent thoroughly controlled release in acidic tumor microenvironments.

Donor-Acceptor-Type Conjugated Polymer-Based Multicolored Drug Carriers with Tunable Aggregation-Induced Emission Behavior for Self-Illuminating Cancer Therapy

Nowadays, multicolored drug carriers have exhibited high significance in designing self-illuminating drug delivery systems to adapt different experimental conditions. In this study, we developed an efficient strategy for self-illuminating antitumor therapy using multicolored aggregation-induced emission (AIE)-active drug carriers by tuning electron donor moieties in donor-acceptor (D-A) structures. Three amphipathic conjugated polymers, P1 to P3, were successfully synthesized using an AIE-active tetraphenylethylene (TPE) moiety and donor-acceptor (D-A)-type electronic structure. Interestingly, the fluorescence behavior of P1 to P3 could be tuned between aggregation-caused quenching and AIE by changing the electron donor moiety. Their fluorescence color in aqueous solution could be easily adjusted from yellow to red by choosing stronger electron donors. After the anticancer drug paclitaxel was loaded, two AIE-active polymers, P1 and P2, could be engineered into polymer dots (Pdots) and applied in self-illuminating cancer therapy. The Pdots could not only reveal their location by a yellow- or red-colored fluorescence signal but also exhibit almost two times in vivo antitumor efficacy, high biocompatibility, and obvious tumor-targeting behavior compared to the commercially available anticancer drug Taxol. Furthermore, P2dots exhibited similar in vivo antitumor efficacy and biocompatibility compared to nonemission Abraxane, a commercially available drug delivery system. This work demonstrates the significant application of a D-A-type structure in the design of self-illuminating drug delivery systems.

Efficient Aggregation-Induced Emission Manipulated by Polymer Host Materials

Linear copolymer hosts bearing a number of pillar[5]arene dangling side chains are synthesized for the facile construction of highly emissive supramolecular polymer networks (SPNs) upon noncovalently cross-linking with a series of tetraphenyethylene (TPE)-based tetratopic guests terminated with different functional groups through supramolecular host-guest interactions. An extremely high fluorescence quantum yield (98.22%) of the SPNs materials is obtained in tetrahydrofuran (THF) by fine-tuning the parameters, and meanwhile supramolecular light-harvesting systems based on spherical supramolecular nanoparticles are constructed by interweaving 9,10-distyrylanthracene (DSA) and TPE-based guest molecules of aggregation-induced emission (AIE) with the copolymer hosts in the mixed solvent of THF/H₂ O. The present study not only illustrates the restriction of the intramolecular rotations (RIR)-ruled emission enhancement mechanism regulated particularly by macrocyclic arene-containing copolymer hosts, but also suggests a new self-assembly approach to construct high-performance light-harvesting materials.

Fluorescent Imidazolium-Type Poly(ionic liquid)s for Bacterial Imaging and Biofilm Inhibition

Fluorescent imidazolium-type poly(ionic liquid)s (PIL)s were synthesized by anion exchange of bromide (Br^-) in poly(3-butyl-1-vinylimidazolium bromide) (PIL-Br) with a fluorescent anion, namely, 3-(4-(1,2,2-triphenylvinyl)phenoxy)propane-1-sulfonate (TPESO₃^-). Such an anion exchange provided antibacterial PILs with aggregation-induced emission (AIE) properties that simultaneously kill and image bacteria. These fluorescence and antibacterial properties could be regulated by controlling the Br^-/TPESO₃^- ratio. The fluorescence intensity increases as this ratio increases, while the antibacterial property exhibits an opposite trend. Moreover, the AIE-type PILs are useful for fluorescently imaging dead bacteria (macroscopically and microscopically) and could effectively inhibit biofilm growth. This study provided a convenient method to obtain fluorescent PILs with adjustable antibacterial and imaging properties.

AIE Supramolecular Assembly with FRET Effect for Visualizing Drug Delivery

Here, we constructed a nanostructured pH/redox dual-responsive supramolecular drug carrier with both aggregation-induced emission (AIE) and Forster resonance energy transfer (FRET) effects, which enabled selective drug release and monitoring drug delivery and release processes. Taking the hyperbranched polyamide amine (H-PAMAM) with intrinsic AIE effects as the core, poly(ethylene glycol) (PEG) was bridged on its periphery by dithiodipropionic acid. Then, through the host-guest interaction of PEG and α-cyclodextrin, the supramolecular nanoparticles with AIE effects were constructed to load the anticancer drug doxorubicin (DOX). The supramolecular assembly has sufficiently large DOX loading due to the abundant cavities formed by branched structures. The hyperbranched core H-PAMAM has strong fluorescence, and the dynamic track of drug carriers and the dynamic drug release process can be monitored by the AIE and FRET effects between H-PAMAM and DOX, respectively. Furthermore, the introduction of disulfide bonds and the pH sensitivity of H-PAMAM enable the achievement of rapid selective release of loaded DOX at the tumor while remaining stable under normal physiological conditions. In vitro cytotoxicity indicates that the drug-loaded supramolecular assembly has a good therapeutic effect on cancer. In addition, the H-PAMAM core is different from the traditional AIE functional group, which has no conjugated structure, such as a benzene ring, thereby providing better biocompatibility. This technology will have broad applications as a new drug delivery system.