1
|
Gavhane UA, Joshi DC, Jayakannan M. Size- and Shape-controlled Biodegradable Polymer Brushes Based on l-Amino Acid for Intracellular Drug Delivery and Deep-Tissue Penetration. Biomacromolecules 2024; 25:3756-3774. [PMID: 38713492 DOI: 10.1021/acs.biomac.4c00341] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/08/2024]
Abstract
We report size- and shape-controlled polymer brushes based on l-amino acid bioresource and study the role of polymer topology on the enzymatic biodegradation and deep-tissue penetration under in vitro and in vivo. For this purpose, l-tyrosine-based propargyl-functionalized monomer is tailor-made and polymerized via solvent-free melt polycondensation strategy to yield hydrophobic and clickable biodegradable poly(ester-urethane)s. Postpolymerization click chemistry strategy is applied to make well-defined amphiphilic one-dimensional rodlike and three-dimensional spherical polymer brushes by merely varying the lengths of PEG-azides in the reaction. These core-shell polymer brushes are found to be nontoxic and nonhemolytic and capable of loading clinical anticancer drug doxorubicin and deep-tissue penetrable near-infrared biomarker IR-780. In vitro enzymatic drug-release kinetics and lysotracker-assisted real-time live-cell confocal bioimaging revealed that the rodlike polymer brush is superior than its spherical counterparts for faster cellular uptake and enzymatic biodegradation at the endolysosomal compartments to release DOX at the nucleus. Further, in vivo live-animal bioimaging by IVIS technique established that the IR-780-loaded rodlike polymer brush exhibited efficient deep-tissue penetration ability and emphasized the importance of polymer brush topology control for biological activity. Polymer brushes exhibit good stability in the blood plasma for more than 72 h, they predominately accumulate in the digestive organs like liver and kidney, and they are less toxic to heart and brain tissues. IVIS imaging of cryotome tissue slices of organs confirmed the deep-penetrating ability of the polymer brushes. The present investigation opens opportunity for bioderived and biodegradable polymer brushes as next-generation smart drug-delivery scaffolds.
Collapse
Affiliation(s)
- Utreshwar Arjun Gavhane
- Department of Chemistry, Indian Institute of Science Education and Research (IISER Pune), Dr. Homi Bhabha Road, Pune 411008, Maharashtra, India
| | - Dheeraj Chandra Joshi
- Department of Chemistry, Indian Institute of Science Education and Research (IISER Pune), Dr. Homi Bhabha Road, Pune 411008, Maharashtra, India
| | - Manickam Jayakannan
- Department of Chemistry, Indian Institute of Science Education and Research (IISER Pune), Dr. Homi Bhabha Road, Pune 411008, Maharashtra, India
| |
Collapse
|
2
|
Sharma N, Allardyce BJ, Rajkhowa R, Agrawal R. Controlled release fertilizer delivery system derived from rice straw cellulose nanofibres: a circular economy based solution for sustainable development. Bioengineered 2023; 14:2242124. [PMID: 37548430 PMCID: PMC10408692 DOI: 10.1080/21655979.2023.2242124] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2023] [Revised: 05/16/2023] [Accepted: 05/22/2023] [Indexed: 08/08/2023] Open
Abstract
Recently, the development of sustainable and environmentally friendly biomaterials has gained the attention of researchers as potential alternatives to petroleum-based materials. Biomaterials are a promising candidate to mitigate sustainability issues due to their renewability, biodegradability, and cost-effectiveness. Thus, the purpose of this study is to explore a cost-effective biomaterial-based delivery system for delivering fertilizers to plants. To achieve this, rice straw (agro-waste) was selected as a raw material for the extraction of cellulose. The cellulose was extracted through alkali treatment (12% NaOH), followed by TEMPO-based oxidation. The cellulose nanofibers were characterized using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy, and transmission electron microscopy. In scanning electron microscopy, a loosening of the fibrillar structure in cellulose nanofibers (CNFs) was observed with a diameter of 17 ± 4 nm. The CNFs were loaded with nitrogen-based fertilizer (ammonium chloride) in 1:1, 1:2, and 2:1 (w/w) proportions. The loading was estimated through surface charge variation; in the case of the 1:1 sample, maximum reductions in surface charge were seen from -42.0 mV to -12.8 mV due to the binding of positive ammonium ions. In the release kinetics study, a controlled release pattern was observed at 1:1, which showed a 58% cumulative release of ammonium ions within 8 days. Thus, the study paves the way for value-added uses of rice straw as an alternative to the current environmentally harmful practices.
Collapse
Affiliation(s)
- Neha Sharma
- TERI Deakin Nanobiotechnology Centre, Sustainable Agriculture Division, Gurugram, Haryana, India
- Institute for Frontier Materials, Deakin University, Geelong, Victoria, Australia
| | | | - Rangam Rajkhowa
- Institute for Frontier Materials, Deakin University, Geelong, Victoria, Australia
| | - Ruchi Agrawal
- TERI Deakin Nanobiotechnology Centre, Sustainable Agriculture Division, Gurugram, Haryana, India
| |
Collapse
|
3
|
Yadav C, Lee JM, Mohanty P, Li X, Jang WD. Graft onto approaches for nanocellulose-based advanced functional materials. NANOSCALE 2023; 15:15108-15145. [PMID: 37712254 DOI: 10.1039/d3nr03087c] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/16/2023]
Abstract
The resurgence of cellulose as nano-dimensional 'nanocellulose' has unlocked a sustainable bioeconomy for the development of advanced functional biomaterials. Bestowed with multifunctional attributes, such as renewability and abundance of its source, biodegradability, biocompatibility, superior mechanical, optical, and rheological properties, tunable self-assembly and surface chemistry, nanocellulose presents exclusive opportunities for a wide range of novel applications. However, to alleviate its intrinsic hydrophilicity-related constraints surface functionalization is inevitably needed to foster various targeted applications. The abundant surface hydroxyl groups on nanocellulose offer opportunities for grafting small molecules or macromolecular entities using either a 'graft onto' or 'graft from' approach, resulting in materials with distinctive functionalities. Most of the reviews published to date extensively discussed 'graft from' modification approaches, however 'graft onto' approaches are not well discussed. Hence, this review aims to provide a comprehensive summary of 'graft onto' approaches. Furthermore, insight into some of the recently emerging applications of this grafted nanocellulose including advanced nanocomposite formulation, stimuli-responsive materials, bioimaging, sensing, biomedicine, packaging, and wastewater treatment has also been reviewed.
Collapse
Affiliation(s)
- Chandravati Yadav
- Department of Chemistry, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, 03722 Seoul, Republic of Korea.
| | - Jeong-Min Lee
- Department of Chemistry, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, 03722 Seoul, Republic of Korea.
| | - Paritosh Mohanty
- Functional Materials Laboratory, Department of Chemistry, IIT Roorkee, Roorkee 247667, Uttarakhand, India
| | - Xinping Li
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, PR China
| | - Woo-Dong Jang
- Department of Chemistry, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, 03722 Seoul, Republic of Korea.
| |
Collapse
|
4
|
Hassan HMA, Betiha MA, Negm NA, El-Hashemy MA, El-Sayed MY, El-Aassar MR, Alsohaimi IH. Valuation of rice straw residues: Production of silylated methylcellulose containing propylamine and propylethylenediamine for use as anticorrosion and antibacterial. Int J Biol Macromol 2022; 220:1241-1252. [PMID: 36030975 DOI: 10.1016/j.ijbiomac.2022.08.137] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2022] [Revised: 08/14/2022] [Accepted: 08/20/2022] [Indexed: 11/27/2022]
Abstract
Green technology is a scientific movement seeking to eliminate industrial chemicals and replace them with natural products by valorizing natural resources or biological waste. In this work, we present the extraction of cellulose from rice straw and chemically modified water-dispersible cellulose (methylcellulose) by performing a methylation process. The methylcellulose is chemically bonded to N-[3-(trimethoxysilyl)propyl]ethylenediamine, and (3-aminopropyl)triethoxysilane compounds to produce a cellulose-organosilane hybrid. The prepared compounds were studied with appropriate techniques such as 1H NMR, XRD, FTIR, TGA, Raman spectroscopy, FE-SEM, and AFM. The prepared materials were used as corrosion inhibitors of steel in 1 N H2SO4 for studies of potentiodynamic polarization measurements and electrochemical impedance spectroscopy. The materials were also studied as antibacterial agents. The results indicate the successful use of a modified extracted cellulose hybrid in the corrosion field and as an antibacterial agent. Quantum chemical assessments based on density functional theory (DFT) of the trimethoxysilyl propylamine and dimethoxymethylsilyl propylethylenediamine grafted methylcellulose were calculated. The results obtained showed the agreement of the theoretical data with the experimental data.
Collapse
Affiliation(s)
- Hassan M A Hassan
- Department of Chemistry, College of Science, Jouf University, Sakaka 2014, Saudi Arabia.
| | - M A Betiha
- Egyptian Petroleum Research Institute, Cairo 11727, Nasr City, Egypt.
| | - Nabel A Negm
- Egyptian Petroleum Research Institute, Cairo 11727, Nasr City, Egypt
| | - Mohammed A El-Hashemy
- Department of Chemistry, College of Science, Jouf University, Sakaka 2014, Saudi Arabia; Air Pollution Research Department, Environmental and Climate Change Research Institute, National Research Centre, Dokki, Giza 12622, Egypt
| | - Mohamed Y El-Sayed
- Department of Chemistry, College of Science, Jouf University, Sakaka 2014, Saudi Arabia
| | - M R El-Aassar
- Department of Chemistry, College of Science, Jouf University, Sakaka 2014, Saudi Arabia
| | | |
Collapse
|
5
|
Preparation of chitosan-cellulose-benzyl isothiocyanate nanocomposite film for food packaging applications. Carbohydr Polym 2022; 285:119234. [DOI: 10.1016/j.carbpol.2022.119234] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2021] [Revised: 01/28/2022] [Accepted: 02/05/2022] [Indexed: 01/20/2023]
|
6
|
Getya D, Gitsov I. Reactive Cellu-mers-A Novel Approach to Improved Cellulose/Polymer Composites. Polymers (Basel) 2022; 14:1670. [PMID: 35566839 PMCID: PMC9103100 DOI: 10.3390/polym14091670] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/04/2022] [Revised: 04/18/2022] [Accepted: 04/19/2022] [Indexed: 11/22/2022] Open
Abstract
In this paper, we describe a novel method for preparation of polymer composites with homogeneous dispersion of natural fibers in the polymer matrix. In our approach, Williamson ether synthesis is used to chemically modify cellulose with polymerizable styrene moieties and transform it into a novel multifunctional cellu-mer that can be further crosslinked by copolymerization with styrene. Reactions with model compounds (cellobiose and cellotriose) successfully confirm the viability of the new strategy. The same approach is used to transform commercially available cellulose nanofibrils (CNFs) of various sizes: Sigmacell and Technocell™ 40, 90 and 150. The styrene-functionalized cellulose oligomers and CNFs are then mixed with styrene and copolymerized in bulk at 65 °C with 2,2'-azobisisobutyronitrile as initiator. The resulting composites are in a form of semi-interpenetrating networks (s-IPN), where poly(styrene) chains are either crosslinked with the uniformly dispersed cellulosic component or entangled through the network. Non-crosslinked poly(styrene) (31-41 w%) is extracted with CHCl3 and analyzed by size-exclusion chromatography to estimate the extent of homopolymerization and reveal the mechanism of the whole process. Electron microscopy analyses of the networks show the lack of cellu-mer agglomeration throughout the polymer matrix. The homogeneous distribution of cellulose entities leads to improved thermal and mechanical properties of the poly(styrene) composites compared to the physical mixtures of the same components and linear poly(styrene) of similar molecular mass.
Collapse
Affiliation(s)
- Dariya Getya
- Department of Chemistry, State University of New York—ESF, Syracuse, NY 13210, USA;
- The Michael M. Szwarc Polymer Research Institute, Syracuse, NY 13210, USA
| | - Ivan Gitsov
- Department of Chemistry, State University of New York—ESF, Syracuse, NY 13210, USA;
- The Michael M. Szwarc Polymer Research Institute, Syracuse, NY 13210, USA
- The BioInspired Institute, Syracuse University, Syracuse, NY 13244, USA
| |
Collapse
|
7
|
Stepanova M, Korzhikova-Vlakh E. Modification of Cellulose Micro- and Nanomaterials to Improve Properties of Aliphatic Polyesters/Cellulose Composites: A Review. Polymers (Basel) 2022; 14:polym14071477. [PMID: 35406349 PMCID: PMC9003142 DOI: 10.3390/polym14071477] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2022] [Revised: 03/25/2022] [Accepted: 03/31/2022] [Indexed: 02/07/2023] Open
Abstract
Aliphatic polyesters/cellulose composites have attracted a lot attention due to the perspectives of their application in biomedicine and the production of disposable materials, food packaging, etc. Both aliphatic polyesters and cellulose are biocompatible and biodegradable polymers, which makes them highly promising for the production of “green” composite materials. However, the main challenge in obtaining composites with favorable properties is the poor compatibility of these polymers. Unlike cellulose, which is very hydrophilic, aliphatic polyesters exhibit strong hydrophobic properties. In recent times, the modification of cellulose micro- and nanomaterials is widely considered as a tool to enhance interfacial biocompatibility with aliphatic polyesters and, consequently, improve the properties of composites. This review summarizes the main types and properties of cellulose micro- and nanomaterials as well as aliphatic polyesters used to produce composites with cellulose. In addition, the methods for noncovalent and covalent modification of cellulose materials with small molecules, polymers and nanoparticles have been comprehensively overviewed and discussed. Composite fabrication techniques, as well as the effect of cellulose modification on the mechanical and thermal properties, rate of degradation, and biological compatibility have been also analyzed.
Collapse
|
8
|
|
9
|
Meleshko TK, Razina AB, Bogorad NN, Kurlykin MP, Kashina AV, Gofman IV, Ten’kovtsev AV, Yakimansky AV. Synthesis of Poly(ester-graft-methyl methacrylate) on a Macroinitiator with Lateral Sulfonyl Chloride Groups by Atom Transfer Radical Polymerization. POLYMER SCIENCE SERIES B 2021. [DOI: 10.1134/s1560090421040072] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Abstract
New polymer brushes with an ester backbone and poly(methyl methacrylate) side chains are synthesized by polycondensation and polymerization methods. The initiating groups are sulfonyl chloride groups laterally attached to the polyester chain. PMMA side chains are grafted by the ATRP method according to the “grafting from” multicenter macroinitiator strategy. The conditions for the polymerization processes in a controlled mode are selected, and the ways of targeted regulation of the degree of polymerization of methacrylate side chains are determined. Using the synthesized copolymers self-supporting films are obtained, and their physical and mechanical properties are studied.
Collapse
|
10
|
Sepahvand S, Bahmani M, Ashori A, Pirayesh H, Yu Q, Nikkhah Dafchahi M. Preparation and characterization of air nanofilters based on cellulose nanofibers. Int J Biol Macromol 2021; 182:1392-1398. [PMID: 34000313 DOI: 10.1016/j.ijbiomac.2021.05.088] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/04/2021] [Revised: 05/11/2021] [Accepted: 05/12/2021] [Indexed: 10/21/2022]
Abstract
One of the most important environmental issues in the world today is the problem of air pollution, which includes particulate matter (PM) and greenhouse gases (mainly CO2). The production of efficient sustainable filters to overcome this concern as well as to provide an alternative to synthetic petroleum-based filters remains a demanding challenge. The purpose of this research was to first produce novel cellulose nanofibers (CNF) based nanofilter from a combination of CNF and chitosan (CS) and then evaluate its applicability for air purification. A number of structural and chemical properties as well as CO2 and PM adsorption efficiency of the modified CNF, were determined using advanced characterization techniques. After pretests, we determined the optimum loading for the CS was 1 wt%, and upon producing the samples, the CNF loadings (1, 1.5, and 2 wt%) were chosen as one variable. For particle absorption, the PM sizes (0.1, 0.3, 0.5, and 2.5 μm) were kept as other variables. Based on SEM results, we concluded the higher the concentration of CNF the higher the specific surface area and the lower the porosity and the diameter of the pores, which was confirmed by the BET test. Furthermore, the results showed that increasing the concentration of modified CNFs increases the adsorption rate of CO2 and PM and that the highest adsorption of CO2 and PM belonged to the 2% modified CNF.
Collapse
Affiliation(s)
- Sima Sepahvand
- Department of Wood and Paper Science and Technology, Natural Resources Faculty, University of Tehran, Iran.
| | - Mohsen Bahmani
- Department of Natural Resources and Earth Science, Shahrekord University, Shahrekord, Iran
| | - Alireza Ashori
- Department of Chemical Technologies, Iranian Research Organization for Science and Technology (IROST), Tehran, Iran.
| | - Hamidreza Pirayesh
- Department of Wood and Paper Science and Technology, Natural Resources Faculty, University of Tehran, Iran
| | - Qingliang Yu
- Department of the Built Environment, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, the Netherlands
| | - Mostafa Nikkhah Dafchahi
- Department of Wood and Paper Science and Technology, Natural Resources Faculty, University of Sari, Iran
| |
Collapse
|
11
|
Zhou Z, Dong Z, Wang L, Song R, Mei N, Chen T, Luo L, Ding Q, Wang X, Tang S. Cellulose membrane modified with LED209 as an antibacterial and anti-adhesion material. Carbohydr Polym 2021; 252:117138. [DOI: 10.1016/j.carbpol.2020.117138] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2020] [Revised: 09/07/2020] [Accepted: 09/21/2020] [Indexed: 02/02/2023]
|
12
|
Zhou Z, Wang L, Hu Y, Song R, Mei N, Chen T, Tang S. Preparation of AAEK-functionalized cellulose film with antibacterial and anti-adhesion activities. Int J Biol Macromol 2020; 167:66-75. [PMID: 33242549 DOI: 10.1016/j.ijbiomac.2020.11.143] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2020] [Revised: 11/09/2020] [Accepted: 11/20/2020] [Indexed: 12/18/2022]
Abstract
Bacterial adhesion infection caused by medical materials in clinical application has become a serious threat, and it urgently needs new strategies to deal with these clinical challenges. The purpose of this study is to explore the effectiveness of surface-decorated aryl (β-amino) ethyl ketones (AAEK), a promising sorting enzyme A (SrtA) inhibitor of Staphylococcus aureus, to improve the anti-adhesion ability of biomaterials. AAEK was covalently grafted onto cellulose films (CF) via copper-catalyzed azide-alkyne 1, 3-dipolar cycloaddition click reaction. The data of contact angle measurements, ATR-FTIR and XPS proved the successful covalent attachment of AAEK-CF, and the antimicrobial efficacy of AAEK coating was assessed by CFUs, crystal violet staining, scanning electron microscopy and Living/Dead bacteria staining assay. The results illustrated that AAEK-CF exhibited excellent anti-adhesion ability to Staphylococcus aureus, and significantly reduced the number of bacteria adhering to the film. More importantly, AAEK-CF could hinder the formation of bacterial biofilm. Furthermore, AAEK-CF indicated no cytotoxicity to mammalian cells, and the cells could grow normally on the modified surface. Hence, our present work demonstrated that the grafting of the SrtA inhibitor-AAEK onto cellulose films enabled to combat bacterial biofilm formation in biomedical applications.
Collapse
Affiliation(s)
- Zongbao Zhou
- National Engineering Research Center for Healthcare Devices, Guangdong Institute of Medical Instruments, Guangzhou 510632, PR China; Biomedical Engineering Institute, Jinan University, Guangzhou 510632, PR China
| | - Lei Wang
- Department of Pharmacology, Utrecht Institute for Pharmaceutical Sciences, Utrecht University, 3568 CG Utrecht, the Netherlands
| | - Yingkui Hu
- National Engineering Research Center for Healthcare Devices, Guangdong Institute of Medical Instruments, Guangzhou 510632, PR China
| | - Rijian Song
- National Engineering Research Center for Healthcare Devices, Guangdong Institute of Medical Instruments, Guangzhou 510632, PR China
| | - Naibin Mei
- National Engineering Research Center for Healthcare Devices, Guangdong Institute of Medical Instruments, Guangzhou 510632, PR China
| | - Tao Chen
- National Engineering Research Center for Healthcare Devices, Guangdong Institute of Medical Instruments, Guangzhou 510632, PR China
| | - Shunqing Tang
- National Engineering Research Center for Healthcare Devices, Guangdong Institute of Medical Instruments, Guangzhou 510632, PR China.
| |
Collapse
|
13
|
Jin XZ, Yu X, Yang C, Qi XD, Lei YZ, Wang Y. Crystallization and hydrolytic degradation behaviors of poly(l-lactide) induced by carbon nanofibers with different surface modifications. Polym Degrad Stab 2019. [DOI: 10.1016/j.polymdegradstab.2019.109014] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/30/2023]
|
14
|
Androulaki K, Chrissopoulou K, Prevosto D, Labardi M, Anastasiadis SH. Structure and Dynamics of Biobased Polyester Nanocomposites. Biomacromolecules 2019; 20:164-176. [PMID: 30485746 DOI: 10.1021/acs.biomac.8b01231] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
Abstract
The structure and the dynamics of two bio-based polyester polyols are investigated in the bulk and close to surfaces in polymer/layered silicate nanocomposites. The morphology of the neat polymers as well as the structure of the nanohybrids are investigated with X-ray diffraction and their thermal properties are studied by differential scanning calorimetry. One of the investigated polyesters is amorphous, whereas the second one is a semicrystalline polymer with intriguing thermal behavior. Hybrids have been synthesized over a broad range of compositions and intercalated structures are always obtained. The thermal transitions in the nanocomposites are observed only when the polymers are in excess outside the completely filled galleries. The glass transition, whenever it can be resolved, appears insensitive to the presence of the inorganic material, whereas the way the crystallization takes place depends on the composition of the nanohybrid. Dielectric relaxation spectroscopy was utilized to study the polymer dynamics. It revealed multiple relaxation processes for the neat polymers both below and above their glass transition temperatures, whereas in the nanocomposites, similarities and differences are observed depending on the specific mode of the dynamic process.
Collapse
Affiliation(s)
- Krystalenia Androulaki
- Institute of Electronic Structure and Laser , Foundation for Research and Technology - Hellas , P.O. Box 1527, 711 10 Heraklion Crete , Greece.,Department of Chemistry , University of Crete , P.O. Box 2208, 710 03 Heraklion Crete , Greece
| | - Kiriaki Chrissopoulou
- Institute of Electronic Structure and Laser , Foundation for Research and Technology - Hellas , P.O. Box 1527, 711 10 Heraklion Crete , Greece
| | - Daniele Prevosto
- CNR-IPCF, Department of Physics , University of Pisa , 56126 Pisa , Italy
| | | | - Spiros H Anastasiadis
- Institute of Electronic Structure and Laser , Foundation for Research and Technology - Hellas , P.O. Box 1527, 711 10 Heraklion Crete , Greece.,Department of Chemistry , University of Crete , P.O. Box 2208, 710 03 Heraklion Crete , Greece
| |
Collapse
|
15
|
Kontturi E, Laaksonen P, Linder MB, Gröschel AH, Rojas OJ, Ikkala O. Advanced Materials through Assembly of Nanocelluloses. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1703779. [PMID: 29504161 DOI: 10.1002/adma.201703779] [Citation(s) in RCA: 325] [Impact Index Per Article: 54.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/07/2017] [Revised: 09/06/2017] [Indexed: 05/20/2023]
Abstract
There is an emerging quest for lightweight materials with excellent mechanical properties and economic production, while still being sustainable and functionalizable. They could form the basis of the future bioeconomy for energy and material efficiency. Cellulose has long been recognized as an abundant polymer. Modified celluloses were, in fact, among the first polymers used in technical applications; however, they were later replaced by petroleum-based synthetic polymers. Currently, there is a resurgence of interest to utilize renewable resources, where cellulose is foreseen to make again a major impact, this time in the development of advanced materials. This is because of its availability and properties, as well as economic and sustainable production. Among cellulose-based structures, cellulose nanofibrils and nanocrystals display nanoscale lateral dimensions and lengths ranging from nanometers to micrometers. Their excellent mechanical properties are, in part, due to their crystalline assembly via hydrogen bonds. Owing to their abundant surface hydroxyl groups, they can be easily modified with nanoparticles, (bio)polymers, inorganics, or nanocarbons to form functional fibers, films, bulk matter, and porous aerogels and foams. Here, some of the recent progress in the development of advanced materials within this rapidly growing field is reviewed.
Collapse
Affiliation(s)
- Eero Kontturi
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
| | - Päivi Laaksonen
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
- Center of Excellence Molecular Engineering of Biosynthetic Hybrid Materials Research, Aalto University and VTT, Espoo, FI-00076, Finland
| | - Markus B Linder
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
- Center of Excellence Molecular Engineering of Biosynthetic Hybrid Materials Research, Aalto University and VTT, Espoo, FI-00076, Finland
| | - André H Gröschel
- Physical Chemistry and Centre for Nanointegration (CENIDE), University of Duisburg-Essen, DE-45127, Essen, Germany
| | - Orlando J Rojas
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
- Center of Excellence Molecular Engineering of Biosynthetic Hybrid Materials Research, Aalto University and VTT, Espoo, FI-00076, Finland
- Department of Applied Physics, Aalto University, Espoo, FI-00076, Finland
| | - Olli Ikkala
- Department of Bioproducts and Biosystems, Aalto University, Espoo, FI-00076, Finland
- Center of Excellence Molecular Engineering of Biosynthetic Hybrid Materials Research, Aalto University and VTT, Espoo, FI-00076, Finland
- Department of Applied Physics, Aalto University, Espoo, FI-00076, Finland
| |
Collapse
|
16
|
Zhou L, He H, Li MC, Huang S, Mei C, Wu Q. Grafting polycaprolactone diol onto cellulose nanocrystals via click chemistry: Enhancing thermal stability and hydrophobic property. Carbohydr Polym 2018; 189:331-341. [DOI: 10.1016/j.carbpol.2018.02.039] [Citation(s) in RCA: 36] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2018] [Revised: 02/12/2018] [Accepted: 02/13/2018] [Indexed: 12/26/2022]
|
17
|
Surface chemical functionalization of cellulose nanocrystals by 3-aminopropyltriethoxysilane. Int J Biol Macromol 2018; 106:1288-1296. [DOI: 10.1016/j.ijbiomac.2017.08.136] [Citation(s) in RCA: 153] [Impact Index Per Article: 25.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/07/2017] [Revised: 08/15/2017] [Accepted: 08/23/2017] [Indexed: 11/20/2022]
|
18
|
Yu HY, Zhang H, Song ML, Zhou Y, Yao J, Ni QQ. From Cellulose Nanospheres, Nanorods to Nanofibers: Various Aspect Ratio Induced Nucleation/Reinforcing Effects on Polylactic Acid for Robust-Barrier Food Packaging. ACS APPLIED MATERIALS & INTERFACES 2017; 9:43920-43938. [PMID: 29171751 DOI: 10.1021/acsami.7b09102] [Citation(s) in RCA: 82] [Impact Index Per Article: 11.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
The traditional approach toward improving the crystallization rate as well as the mechanical and barrier properties of poly(lactic acid) (PLA) is the incorporation of nanocelluloses (NCs). Unfortunately, little study has been focused on the influence of the differences in NC morphology and dimensions on the PLA property enhancement. Here, by HCOOH/HCl hydrolysis of lyocell fibers, microcrystalline cellulose (MCC), and ginger fibers, we unveil the preparation of cellulose nanospheres (CNS), rod-like cellulose nanocrystals (CNC), and cellulose nanofibers (CNF) with different aspect ratios, respectively. All the NC surfaces were chemically modified by Fischer esterification with hydrophobic formate groups to improve the NC dispersion in the PLA matrix. This study systematically compared CNS, CNC, and CNF as reinforcing agents to induce different kinds of heterogeneous nucleation and reinforce the effects on the properties of PLA. The incorporation of three NCs can greatly improve the PLA crystallization ability, thermal stability, and mechanical strength of nanocomposites. At the same NC loading level, the PLA/CNS showed the highest crystallinity (19.8 ± 0.4%) with a smaller spherulite size (33 ± 1.5 μm), indicating that CNS, with its high specific surface area, can induce a stronger heterogeneous nucleation effect on the PLA crystallization than CNC or CNF. Instead, compared to PLA, the PLA/CNF nanocomposites gave the largest Young's modulus increase of 350 %, due to the larger aspect ratio/rigidity of CNF and their interlocking or percolation network caused by filler-matrix interfacial bonds. Furthermore, taking these factors of hydrogen bonding interaction, increased crystallinity, and interfacial tortuosity into account, the PLA/CNC nanocomposite films showed the best barrier property against water vapor and lowest migration levels in two liquid food simulates (well below 60 mg kg-1 for required overall migration in packaging) than CNS- and CNF-based films. This comparative study was very beneficial for selecting reasonable nanocelluloses as nucleation/reinforcing agents in robust-barrier packaging biomaterials with outstanding mechanical and thermal performance.
Collapse
Affiliation(s)
- Hou-Yong Yu
- The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, National Engineering Lab for Textile Fiber Materials & Processing Technology, College of Materials and Textile, Zhejiang Sci-Tech University , Xiasha Higher Education Park 2 Avenue-5, Hangzhou 310018, China
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University , Shanghai 201620, China
| | - Heng Zhang
- The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, National Engineering Lab for Textile Fiber Materials & Processing Technology, College of Materials and Textile, Zhejiang Sci-Tech University , Xiasha Higher Education Park 2 Avenue-5, Hangzhou 310018, China
| | - Mei-Li Song
- The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, National Engineering Lab for Textile Fiber Materials & Processing Technology, College of Materials and Textile, Zhejiang Sci-Tech University , Xiasha Higher Education Park 2 Avenue-5, Hangzhou 310018, China
| | - Ying Zhou
- The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, National Engineering Lab for Textile Fiber Materials & Processing Technology, College of Materials and Textile, Zhejiang Sci-Tech University , Xiasha Higher Education Park 2 Avenue-5, Hangzhou 310018, China
| | - Juming Yao
- The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, National Engineering Lab for Textile Fiber Materials & Processing Technology, College of Materials and Textile, Zhejiang Sci-Tech University , Xiasha Higher Education Park 2 Avenue-5, Hangzhou 310018, China
| | - Qing-Qing Ni
- The Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, National Engineering Lab for Textile Fiber Materials & Processing Technology, College of Materials and Textile, Zhejiang Sci-Tech University , Xiasha Higher Education Park 2 Avenue-5, Hangzhou 310018, China
| |
Collapse
|
19
|
Shojaei S, Ghasemi Z, Shahrisa A. Cu(I)@Fe
3
O
4
nanoparticles supported on imidazolium‐based ionic liquid‐grafted cellulose: Green and efficient nanocatalyst for multicomponent synthesis of
N
‐sulfonylamidines and
N
‐sulfonylacrylamidines. Appl Organomet Chem 2017. [DOI: 10.1002/aoc.3788] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Affiliation(s)
- Salman Shojaei
- Department of Organic and Biochemistry, Faculty of ChemistryUniversity of Tabriz Tabriz 5166614766 Iran
| | - Zarrin Ghasemi
- Department of Organic and Biochemistry, Faculty of ChemistryUniversity of Tabriz Tabriz 5166614766 Iran
| | - Aziz Shahrisa
- Department of Organic and Biochemistry, Faculty of ChemistryUniversity of Tabriz Tabriz 5166614766 Iran
| |
Collapse
|