Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Self-Assembly Regulated Photocatalysis of Porphyrin-TiO2 Nanocomposites

Photoactive artificial nanocatalysts that mimic natural photoenergy systems can yield clean and renewable energy. However, their poor photoabsorption capability and disfavored photogenic electron-hole recombination hinder their production. Herein, we designed two nanocatalysts with various microstructures by combining the tailored self-assembly of the meso-tetra(p-hydroxyphenyl) porphine photosensitizer with the growth of titanium dioxide (TiO2). The porphyrin photoabsorption antenna efficiently extended the absorption range of TiO2 in the visible region, while anatase TiO2 promoted the efficient electron-hole separation of porphyrin. The photo-induced electrons were transferred to the surface of the Pt co-catalyst for the generation of hydrogen via water splitting, and the hole was utilized for the decomposition of methyl orange dye. The hybrid structure showed greatly increased photocatalytic performance compared to the core@shell structure due to massive active sites and increased photo-generated electron output. This controlled assembly regulation provides a new approach for the fabrication of advanced, structure-dependent photocatalysts.

Four-electron reduction of CO2: from formaldehyde and acetal synthesis to complex transformations

The expansive and dynamic field of the CO2 Reduction Reaction (CO2RR) seeks to harness CO2 as a sustainable carbon source or energy carrier. While significant progress has been made in two, six, and eight-electron reductions of CO2, the four-electron reduction remains understudied. This review fills this gap, comprehensively exploring CO2 reduction into formaldehyde (HCHO) or acetal-type compounds (EOCH2OE, with E = [Si], [B], [Zr], [U], [Y], [Nb], [Ta] or -R) using various CO2RR systems. These encompass (photo)electro-, bio-, and thermal reduction processes with diverse reductants. Formaldehyde, a versatile C1 product, is challenging to synthesize and isolate from the CO2RR. The review also discusses acetal compounds, emphasizing their significance as pathways to formaldehyde with distinct reactivity. Providing an overview of the state of four-electron CO2 reduction, this review highlights achievements, challenges, and the potential of the produced compounds - formaldehyde and acetals - as sustainable sources for valuable product synthesis, including chiral compounds.

Modulating Electronic Structure of Iridium Single-Atom Anchored on 3D Fe-Doped β-Ni(OH)2 Catalyst with Nanopyramid Array Structure for Enhanced Oxygen Evolution Reaction

Developing high-performance electrocatalysts for oxygen evolution reaction (OER) is crucial in the pursuit of clean and sustainable hydrogen energy, yet still challenging. Herein, a spontaneous redox strategy is reported to achieve iridium single-atoms anchored on hierarchical nanosheet-based porous Fe doped β-Ni(OH)2 pyramid array electrodes (SAs Ir/Fe-β-Ni(OH)2), which exhibits high OER performance with a low overpotential of 175 mV at 10 mA cm-2 and a remarkable OER current density in alkaline electrolyte, surpassing Fe-β-Ni(OH)2/NF and IrO2 by 31 and 38 times at 1.43 V versus RHE, respectively. OER catalytic mechanism demonstrates that the conversion of *OH→*O and the active lattice O content can be significantly improved due to the modulation effect of the Ir single atoms on the local electronic structure and the redox behavior of FeNi (oxy) hydroxide true active species. This work provides a promising insight into understanding the OER enhancement mechanism for Ir single-atoms modified FeNi-hydroxide systems.

A Coordination-Derived Cerium-Based Amorphous-Crystalline Heterostructure with High Electrocatalytic Oxygen Evolution Activity

The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx, exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.

Mechanism insight into the N-C polar bond and Pd-Co heterojunction for improved hydrogen evolution activity

Constructing platinum-like materials with excellent catalytic activity and low cost has great significance for hydrogen evolution reaction (HER) during electrolysis of water. Herein, palladium nanoparticles (NPs) deposition on the surface of Co NPs using nitrogen-doped carbon (NC) as substrate, denoted as N-ZIFC/CoPd-30, are manufactured and served as HER electrocatalysts. Characterization results and density functional theory calculations validate that Pd-Co heterojunctions with NC acting as "electron donators" promote the Pd species transiting to the electron-rich state based on an efficient electron transfer mechanism, namely the N-C polar bonds induced strong metal-support interaction effect. The electron-rich Pd sites are beneficial to HER. Satisfactorily, N-ZIFC/CoPd-30 have only low overpotentials of 16, 162, and 13 mV@-10 mA cm-2 with the small Tafel slopes of 98 mV/decade, 126 mV/decade, and 72 mV/decade in pH of 13, 7, and 0, respectively. The success in fabricating N-ZIFC/CoPd opens a promising path to constructing other platinum-like electrocatalysts with high HER activity.

Low-Temperature Synthesis of Mesoporous Half-Metallic High-Entropy Spinel Oxide Nanofibers for Photocatalytic CO2 Reduction

High-entropy oxides (HEOs) exhibit great prospects owing to their varied composition, chemical adaptability, adjustable light-absorption ability, and strong stability. In this study, we report a strategy to synthesize a series of porous high-entropy spinel oxide (HESO) nanofibers (NFs) at a low temperature of 400 °C by a sol-gel electrospinning technique. The key lies in selecting six acetylacetonate salt precursors with similar coordination abilities, maintaining a high-entropy disordered state during the transformation from stable sols to gel NFs. The as-synthesized HESO NFs of (NiCuMnCoZnFe)3O4 show a high specific surface area of 66.48 m2/g, a diverse elemental composition, a dual bandgap, half-metallicity property, and abundant defects. The diverse elements provide various synergistic catalytic sites, and oxygen vacancies act as active sites for electron-hole separation, while the half-metallicity and dual-bandgap structure offer excellent light absorption ability, thus expanding its applicability to a wide range of photocatalytic processes. As a result, the HESO NFs can efficiently convert CO2 into CH4 and CO with high yields of 8.03 and 15.89 μmol g-1 h-1, respectively, without using photosensitizers or sacrificial agents.

Stimuli-responsive biodegradable silica nanoparticles: From native structure designs to biological applications

Due to their inherent advantages, silica nanoparticles (SiNPs) have greatly potential applications as bioactive materials in biosensors/biomedicine. However, the long-term and nonspecific accumulation in healthy tissues may give rise to toxicity, thereby impeding their widespread clinical application. Hence, it is imperative and noteworthy to develop biodegradable and clearable SiNPs for biomedical purposes. Recently, the design of multi-stimuli responsive SiNPs to improve degradation efficiency under specific pathological conditions has increased their clinical trial potential as theranostic nanoplatform. This review comprehensively summaries the rational design and recent progress of biodegradable SiNPs under various internal and external stimuli for rapid in vivo degradation and clearance. In addition, the factors that affect the biodegradation of SiNPs are also discussed. We believe that this systematic review will offer profound stimulus and timely guide for further research in the field of SiNP-based nanosensors/nanomedicine.

Amorphization Activated Multimetallic Pd Alloys for Boosting Oxygen Reduction Catalysis

Amorphous nanomaterials have drawn extensive attention owing to their unique features, while amorphization on noble metal nanomaterials still remains formidably challenging. Herein, we demonstrate a universal strategy to synthesize amorphous Pd-based nanomaterials from unary to quinary metals through the introduction of phosphorus (P). The amorphous Pd-based nanoparticles (NPs) exhibit generally promoted oxygen reduction reaction (ORR) activity and durability compared with their crystalline counterparts. Significantly, the quinary P-PdCuNiInSn NPs, benefiting from the amorphous structure and multimetallic component effect, exhibit mass activities as high as 1.04 A mgPd-1 and negligible activity decays of 1.8% among the stability tests, which are much better than values for original Pd NPs (0.134 A mgPd-1 and 28.4%). Experimental and theoretical analyses collectively reveal that the synergy of P-induced amorphization and the expansion of metallic components can considerably lower the free energy changes in the rate-determined step, thereby explaining the positive correlation with the catalytic activity.

Colloid synthesis of Ni12P5/N, S-doped graphene as efficient bifunctional catalyst for alkaline hydrogen evolution and triiodide reduction reaction

Designing high-efficient bifunction catalysts with excellent catalytic activity and enhanced charge-transfer capability in both alkaline hydrogen evolution reaction (HER) and triiodide reduction reaction (IRR) is of utmost significance to advance the development of green hydrogen production and photovoltaics, respectively, yet remains a crucial challenge. Here, highly dispersed and small-sized Ni12P5 nanocrystals with narrow size distribution was well attached on the surface of N, S co-doped graphene (Ni12P5/NSG) by the facile hot-injection method. As expected, the optimized Ni12P5/NSG requires a relatively low overpotential of 132.94 ± 0.08 mV to deliver a current density of 10 mA cm-2 in alkaline condition, accompanied with remarkable long-time durability with negligible attenuation over 50 h. Density functional theory (DFT) calculations revealed that the positively synergic effect between Ni12P5 and NSG are in favor of modulating the rate determining step of the dissociation of H2O to *(OH-H), thereby upgrading its HER activity. When used as the counter electrode catalyst for IRR in DSSCs, the resultant Ni12P5/NSG exhibits extraordinary Pt-like catalytic activity and well electrochemical stability in iodide-based electrolyte, delivering a high photoelectric conversion performance (PCE) comparable to Pt. The improved PCE can be attributed to the accelerated interfacial charge-transfer capability around active sites for facilitating the reaction kinetics of IRR, as demonstrated by DFT calculations. This work provides an effective strategy for synthesizing cost-effective composites with multi-active sites and offering valuable insight into the structure-performance relationship, which is conducive to guide the synthesis of promising catalysts in the energy conversion field.

Improving photocatalytic hydrogen production by switching charge kinetics from type-I to Z-scheme via defective engineering

By providing the spatial separation of the active sites and retaining high oxidative and reducing capacity, the direct Z-scheme heterostructure is considered the most potential structure for yielding photo-electric response. However, challenges still exist in the directional transfer of charge carriers between two semiconductors in direct Z-scheme structures. In this regard, by constructing the Vzn defect and p-n junction, a direct Z-scheme ZnxCd1-xS@ZnS-NiS heterostructure was obtained for the regulated electronic structure, which ensured high-yield hydrogen properties. The Zn vacancy in the partially-coated ZnS shell led to the Vzn energy level, and the addition of NiS led to the p-n structure, which caused a drastic downshift of the band edge potentials in comparison to that of pristine CdS. This variation gave rise to a staggered band edge alignment between ZnxCd1-xS and NiS, resulting in the variation of charge transfer kinetics from type-I to direct Z-scheme. Through careful characterization, it was found that the optimal photocatalytic hydrogen precipitation activity reached 16 683.6 μmol g-1 h-1, which was 70 times that of CdS, and this improvement was considered to form a spatial barrier, providing a clear direction and path for carrier transmission.

Defect engineering enhances plasmonic-hot electrons exploitation for CO2 reduction over polymeric catalysts

Defect sites present on the surface of catalysts serve a crucial role in different catalytic processes. Herein, we have investigated defect engineering within a hybrid system composed of "soft" polymer catalysts and "hard" metal nanoparticles, employing the disparity in their thermal expansions. Electron paramagnetic resonance, X-ray photoelectron spectroscopy, and mechanistic studies together reveal the formation of new abundant defects and their synergistic integrability with plasmonic enhancement within the hybrid catalyst. These active defects, co-localized with plasmonic Ag nanoparticles, promote the utilization efficiency of hot electrons generated by local plasmons, thereby enhancing the CO2 photoreduction activity while maintaining the high catalytic selectivity.

Interfacial engineering of transition metal dichalcogenide/carbon heterostructures for electrochemical energy applications

To support the global goal of carbon neutrality, numerous efforts have been devoted to the advancement of electrochemical energy conversion (EEC) and electrochemical energy storage (EES) technologies. For these technologies, transition metal dichalcogenide/carbon (TMDC/C) heterostructures have emerged as promising candidates for both electrode materials and electrocatalysts over the past decade, due to their complementary advantages. It is worth noting that interfacial properties play a crucial role in establishing the overall electrochemical characteristics of TMDC/C heterostructures. However, despite the significant scientific contribution in this area, a systematic understanding of TMDC/C heterostructures' interfacial engineering is currently lacking. This literature review aims to focus on three types of interfacial engineering, namely interfacial orientation engineering, interfacial stacking engineering, and interfacial doping engineering, of TMDC/C heterostructures for their potential applications in EES and EEC devices. To accomplish this goal, a combination of experimental and theoretical approaches was used to allow the analysis and summary of the fundamental electrochemical properties and preparation strategies of TMDC/C heterostructures. Moreover, this review highlights the design and utilization of the interfacial engineering of TMDC/C heterostructures for specific EES and EEC devices. Finally, the challenges and opportunities of using interfacial engineering of TMDC/C heterostructures in practical EES and EEC devices are outlined. We expect that this review will effectively guide readers in their understanding, design, and application of interfacial engineering of TMDC/C heterostructures.

Self-assembled p-n Ag2O@Bi2O2S nanoflower heterojunctions for sensitive photoelectrochemical immunoassay

A new photoelectrochemical immunoassay based on self-assembled p-n Ag2O@Bi2O2S nanoflower heterojunction was designed and developed for quantitative monitoring of prostate-specific antigen (PSA) in biological fluids. Primarily, self-assembled p-n Ag2O@Bi2O2S nanoflower heterojunctions were served as the photoactive materials and coated onto the surface of electrodes. Subsequently, the glucose oxidase (GOx) was bound to the detection antibody (mAb2) labeled gold nanoparticles (Au NPs) and then were employed to accomplish a sandwich-like immunoreaction to generate H2O2 on a microplate incubated with monoclonal anti-PSA antibodies. In the presence of PSA, the product (H2O2) was catalyzed by the substrate, which was used as an electron sacrificial agent to improve signal conversion and capture of photogenerated electrons. Under optimum conditions, a wide linear range of 0.01-50 ng mL-1 and a low detection limit of 5.3 pg mL-1 were accomplished with the sensor, exhibiting an excellent photocurrent response. Moreover, the proposed sensor revealed satisfactory reproducibility, high selectivity, and acceptable accuracy for the real sample testing. Importantly, our work provides a novel strategy for high sensitivity detection of disease-associated biomarkers for the early diagnosis of cancers.

Solvothermally designed Pr-MOF/Fe2O3 based nanocomposites for efficient electrocatalytic water splitting

To meet the energy demand of modern civilization, efforts to find renewable, safe, and highly effective fuel generation are still a big challenge. The oxygen evolution reaction (OER) is one of many modern technologies for hydrogen generation, and a number of new electrode materials have been created to increase the effectiveness of O2 evolution. This project utilizes a range of high performance nanomaterials, such as Pr-MOF, Fe2O3, and Pr-MOF/Fe2O3, to carry out the oxygen evolution reaction. This study shows that Pr-MOF/Fe2O3 exhibits exceptional electrocatalytic activity in alkaline solution with 238 mV overpotential at the current density of 10 mA cm-2 and a Tafel slope of 37 mV dec-1 which is much lower when compared to pure Pr-MOF and Fe2O3. The enhanced electrochemical results are due to the higher electrochemical surface area of 237 cm2. This work will lay the foundation for an approach to enhance the crystalline nature of surface-active nanoparticles made from rare earth MOFs for a range of electrochemical energy applications.

Clay-based 1D-2D halloysite&g-C3N4 nanostructured meat floss for photocatalytic hydrogen evolution

Graphitic carbon nitride (g-C3N4) has drawn extensive attention with some features including visible-light response as non-metallic semiconductor, low cost in raw material and green pollution-free for environment, but suffers from some issues such as fast charge carriers' recombination, easy aggregation, etc. In this work, the 1D-2D HNTs&g-C3N4-X binary materials similar to meat floss pattern in a series of halloysite loading amounts are designed via a facile electrostatic self-assembly strategy with debris g-C3N4 after cell pulverizing treatment and HNTs that outwardly modified by cetyltrimethylammonium bromide (CTAB) as the building blocks. The halloysite-mediated satellite-core material displays a photocatalytic of H2 evolution performance with the highest evolution rate of 137.0 μmol g-1 h-1 in visible light condition with no co-catalysts, and is ∼3.4 times that of bulk g-C3N4, mainly benefiting from the reduced nanometer size of debris g-C3N4 and enhanced interface dispersion ability by HNTs, resulting in ameliorative separation efficiency of photogenerated charge carriers. This research conclusively provides the new perspective towards the performance enhancement of water splitting of g-C3N4 in raw clay mineral modification mode and broadens the applications of mineral-based composite in the renewable energy utilization field.

Biomass-Derived Carbon-Based Multicomponent Integration Catalysts for Electrochemical Water Splitting

Electrocatalytic water splitting powered by sustainable electricity is a crucial approach for the development of new generation green hydrogen technology. Biomass materials are abundant and renewable, and the application of catalysis can increase the value of some biomass waste and turn waste into fortune. Converting economical and resource-rich biomass into carbon-based multicomponent integrated catalysts (MICs) has been considered as one of the most promising ways to obtain inexpensive, renewable and sustainable electrocatalysts in recent years. In this review, recent advances in biomass-derived carbon-based MICs towards electrocatalytic water splitting are summarized, and the existing issues and key aspects in the development of these electrocatalysts are also discussed and prospected. The application of biomass-derived carbon-based materials will bring some new opportunities in the fields of energy, environment, and catalysis, as well as promote the commercialization of new nanocatalysts in the near future.

Lattice-Strain Engineering for Heterogenous Electrocatalytic Oxygen Evolution Reaction

The energy efficiency of metal-air batteries and water-splitting techniques is severely constrained by multiple electronic transfers in the heterogenous oxygen evolution reaction (OER), and the high overpotential induced by the sluggish kinetics has become an uppermost scientific challenge. Numerous attempts are devoted to enabling high activity, selectivity, and stability via tailoring the surface physicochemical properties of nanocatalysts. Lattice-strain engineering as a cutting-edge method for tuning the electronic and geometric configuration of metal sites plays a pivotal role in regulating the interaction of catalytic surfaces with adsorbate molecules. By defining the d-band center as a descriptor of the structure-activity relationship, the individual contribution of strain effects within state-of-the-art electrocatalysts can be systematically elucidated in the OER optimization mechanism. In this review, the fundamentals of the OER and the advancements of strain-catalysts are showcased and the innovative trigger strategies are enumerated, with particular emphasis on the feedback mechanism between the precise regulation of lattice-strain and optimal activity. Subsequently, the modulation of electrocatalysts with various attributes is categorized and the impediments encountered in the practicalization of strained effect are discussed, ending with an outlook on future research directions for this burgeoning field.

CNTs Bridged Basal-Plane-Active 2H-MoS2 Nanosheets for Efficient Robust Electrocatalysis

2D 2H-phase MoS2 is promising for electrocatalytic applications because of its stable phase, rich edge sites, and large surface area. However, the pristine low-conductive 2H-MoS2 suffers from limited electron transfer and surface activity, which become worse after their highly likely aggregation/stacking and self-curling during applications. In this work, these issues are overcome by conformally attaching the intercalation-detonation-exfoliated, surface S-vacancy-rich 2H-MoS2 onto robust conductive carbon nanotubes (CNTs), which electrically bridge bulk electrode and local MoS2 catalysts. The optimized MoS2 /CNTs nanojunctions exhibit outstanding stable electroactivity (close to commercial Pt/C): a polarization overpotential of 79 mV at the current density of 10 mA cm-2 and the Tafel slope of 33.5 mV dec-1 . Theoretical calculations unveil the metalized interfacial electronic structure of MoS2 /CNTs nanojunctions, enhancing defective-MoS2 surface activity and local conductivity. This work provides guidance on rational design for advanced multifaceted 2D catalysts combined with robust bridging conductors to accelerate energy technology development.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Emerging conjugated polymers for heterogeneous photocatalytic chemical transformation

In recent decades, the efficient utilization of solar energy through heterogeneous photocatalytic chemical transformation has attracted much attention. As emerging metal-free, pure organic and heterogeneous photocatalysts, π-conjugated polymers (CPs) have been used in visible-light-driven chemical transformations due to their stability, high specific surface area, metal-free nature, and high structural designability. In this review, we summarize the synthesis protocols and design strategies for efficient CP-based photocatalysts based on the photocatalytic mechanisms. Then we highlight the key progress in light-driven chemical transformation using CPs developed by our group. Finally, we present the outlook and possible challenges for future progress of the field.

Introduction to new horizons in materials for energy conversion, optics and electronics

In conjunction with the Emerging Investigator Forum celebrating the 120^th anniversary of Southeast University, we herein present a collection of articles focused on the energy conversion, optics, and electronics applications of (nano)materials.

Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting

Porous metal foams (e.g., Ni/Cu/Ti) are applied as catalyst supports extensively for water splitting due to their large specific area and excellent conductivity, however, intrinsic bubble congestion is unavoidable because of the irregular three-dimensional (3D) networks, resulting in high polarization and degraded electrocatalytic performances. To boost the H₂ O decomposition kinetics, the immediate bubble removal and water supply sequential in the gas-liquid-solid interface is essential. Inspired by the high efficiency of water/nutrient transport in the capillaries plants, this work designs a graphene-based capillary array with side holes as catalyst support to manage the bubble release and water supply via a Z-axis controllable digital light processing (DLP) 3D printing technology. Like planting rice, a low-cost, high-active CoNi carbonate hydroxide (CoNiCH) is planted on support. A homemade cell can reach 10 mA cm^-2 in 1.51 V, and be kept at 30 mA cm^-2 for 60 h without noticeable degradation, surpassing most of the known cells. This research provides a promising avenue to design and prepare advanced catalysts in various fields, including energy applications, pollutant treatment, and chemical synthesis.

Lignocellulosic biomass valorization via bio-photo/electro hybrid catalytic systems

Lignocellulosic biomass valorization is regarded as a promising approach to alleviate energy crisis and achieve carbon neutrality. Bioactive enzymes have attracted great attention and been commonly applied for biomass valorization owing to their high selectivity and catalytic efficiency under environmentally benign reaction conditions. Same as biocatalysis, photo-/electro-catalysis also happens at mild conditions (i.e., near ambient temperature and pressure). Therefore, the combination of these different catalytic approaches to benefit from their resulting synergy is appealing. In such hybrid systems, harness of renewable energy from the photo-/electro-catalytic compartment can be combined with the unique selectivity of biocatalysts, therefore providing a more sustainable and greener approach to obtain fuels and value-added chemicals from biomass. In this review, we firstly introduce the pros/cons, classifications, and the applications of photo-/electro-enzyme coupled systems. Then we focus on the fundamentals and comprehensive applications of the most representative biomass-active enzymes including lytic polysaccharide monooxygenases (LPMOs), glucose oxidase (GOD)/dehydrogenase (GDH) and lignin peroxidase (LiP), together with other biomass-active enzymes in the photo-/electro- enzyme coupled systems. Finally, we propose current deficiencies and future perspectives of biomass-active enzymes to be applied in the hybrid catalytic systems for global biomass valorization.

Electrochemical Oxidation Encapsulated Ru Clusters Enable Robust Durability for Efficient Oxygen Evolution

Electrochemical oxidization and thermodynamic instability agglomeration are a primary challenge in triggering metal-support interactions (MSIs) by immobilizing metal atoms on a carrier to achieve efficient oxygen evolution reactions (OER). Herein, Ru clusters anchored to the VS₂ surface and the VS₂ nanosheets embedded vertically in carbon cloth (Ru-VS₂ @CC) are deliberately designed to realize high reactivity and exceptional durability. In situ Raman spectroscopy reveals that the Ru clusters are preferentially electro-oxidized to form RuO₂ chainmail, both affording sufficient catalytic sites and protecting the internal Ru core with VS₂ substrates for consistent MSIs. Theoretical calculations elucidate that electrons across the Ru/VS₂ interface aggregate toward the electro-oxidized Ru clusters, while the electronic coupling of Ru 3p and O 2p orbitals boosts a positive shift in the Fermi energy level of Ru, optimizing the adsorption capacity of the intermediates and diminishing the migration barriers of the rate-determining steps. Therefore, the Ru-VS₂ @CC catalyst demonstrated ultra-low overpotentials of 245 mV at 50 mA cm^-2 , while the zinc-air battery maintained a narrow gap (0.62 V) after 470 h of reversible operation. This work has transformed the corrupt into the miraculous and paved a new way for the development of efficient electrocatalysts.

Assembling CeO2 nanoparticles on ZIF-8 via the hydrothermal method to promote the CO2 photoreduction performance

Photocatalytic reduction of CO₂ to valuable carbon fuel is a prospective technique to decrease CO₂ emissions and simultaneously generate efficient chemical energy. In this paper, a novel high-efficiency photocatalyst ZIF-8@CeO₂ heterogeneous composite (ZIF = zeolitic imidazolate framework) was prepared by the hydrothermal method, where CeO₂ nanospheres were uniformly grown on the surface of ZIF-8. Compared to pristine ZIF-8 or CeO₂ nanoparticles (NPs), the ZIF-8@CeO₂ composite shows significantly better efficiency in the reduction of CO₂ into CO and CH₄ under light irradiation, that is the CO evolution rate can reach 465.01 μmol g^-1 h^-1 and the CH₄ evolution rate can reach 181.27 μmol g^-1 h^-1. Analyses indicated that the addition of CeO₂ in the composites will expand the photoresponse region; the formation of the ZIF-8/CeO₂ heterojunction significantly promoted the separation of photogenerated electron-hole pairs within the composite. This work provided an effective method to further improve the catalytic activity of ZIF-based materials, which paved a new way for eco-friendly conversion of carbon dioxide into clean fuels and they could also have huge potential for application in energy and environmental science.

Self-Supporting Co/CeO2 Heterostructures for Ampere-Level Current Density Alkaline Water Electrolysis

Remodeling the active surface through fabricating heterostructures can substantially enhance alkaline water electrolysis driven by renewable electrical energy. However, there are still great challenges in the synthesis of highly reactive and robust heterostructures to achieve both ampere-level current density hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, we report a new Co/CeO₂ heterojunction self-supported electrode for sustainable overall water splitting. The self-supporting Co/CeO₂ heterostructures required only low overpotentials of 31.9 ± 2.2, 253.3 ± 2.7, and 316.7 ± 3 mV for HER and 214.1 ± 1.4, 362.3 ± 1.9, and 400.3 ± 3.7 mV for OER at 0.01, 0.5, and 1.0 A·cm^-2, respectively, being one of the best Co-based bifunctional electrodes. Electrolyzer constructed from this electrode acting as an anode and cathode merely required cell voltages of 1.92 ± 0.02 V at 1.0 A·cm^-2 for overall water splitting. Multiple characterization techniques combined with density functional theory calculations disclosed the different active sites on the anode and cathode, and the charge redistributions on the heterointerfaces that can optimize the adsorption of H and oxygen-containing intermediates, respectively. This study presents the tremendous prospective of self-supporting heterostructures for effective and economical overall water splitting.

Two-Dimensional Ultrathin Graphic Carbon Nitrides with Extended π-Conjugation as Extraordinary Efficient Hydrogen Evolution Photocatalyst

Construction of 2D graphic carbon nitrides (g-CN_x ) with wide visible light adsorption range and high charge separation efficiency concurrently is of great urgent demand and still very challenging for developing highly efficient photocatalysts for hydrogen evolution. To achieve this goal, a two-step pyrolytic strategy has been applied here to create ultrathin 2D g-CN_x with extended the π-conjugation. It is experimentally proven that the extension of π-conjugation in g-CN_x is not only beneficial to narrowing the bandgap, but also improving the charge separation efficiency of the g-CN_x . As an integral result, extraordinary apparent quantum efficiencies (AQEs) of 57.3% and 7.0% at short (380 nm) and long (520 nm) wavelength, respectively, are achieved. The formation process of the extended π-conjugated structures in the ultrathin 2D g-CN_x has been investigated using XRD, FT-IR, Raman, XPS, and EPR. Additionally, it has been illustrated that the two-step pyrolytic strategy is critical for creating ultrathin g-CN_x nanosheets with extended π-conjugation by control experiments. This work shows a feasible and effective strategy to simultaneously expand the light adsorption range, enhance charge carrier mobility and depress electron-hole recombination of g-CN_x for high-efficient photocatalytic hydrogen evolution.

Monometallic interphasic synergy via nano-hetero-interfacing for hydrogen evolution in alkaline electrolytes

Electrocatalytic synergy is a functional yet underrated concept in electrocatalysis. Often, it materializes as intermetallic interaction between different metals. We demonstrate interphasic synergy in monometallic structures is as much effective. An interphasic synergy between Ni(OH)₂ and Ni-N/Ni-C phases is reported for alkaline hydrogen evolution reaction that lowers the energy barriers for hydrogen adsorption-desorption and facilitates that of hydroxyl intermediates. This makes ready-to-serve Ni active sites and allocates a large amount of Ni d-states at Fermi level to promote charge redistribution from Ni(OH)₂ to Ni-N/Ni-C and the co-adsorption of H_ads and OH_ads intermediates on Ni-N/Ni-C moieties. As a result, a Ni(OH)₂@Ni-N/Ni-C hetero-hierarchical nanostructure is developed, lowering the overpotentials to deliver -10 and -100 mA cm^-2 in alkaline media by 102 and 113 mV, respectively, compared to monophasic Ni(OH)₂ catalyst. This study unveils the interphasic synergy as an effective strategy to design monometallic electrocatalysts for water splitting and other energy applications.

Advanced Photocatalysts for CO2 Conversion by Severe Plastic Deformation (SPD)

Excessive CO2 emission from fossil fuel usage has resulted in global warming and environmental crises. To solve this problem, the photocatalytic conversion of CO2 to CO or useful components is a new strategy that has received significant attention. The main challenge in this regard is exploring photocatalysts with high efficiency for CO2 photoreduction. Severe plastic deformation (SPD) through the high-pressure torsion (HPT) process has been effectively used in recent years to develop novel active catalysts for CO2 conversion. These active photocatalysts have been designed based on four main strategies: (i) oxygen vacancy and strain engineering, (ii) stabilization of high-pressure phases, (iii) synthesis of defective high-entropy oxides, and (iv) synthesis of low-bandgap high-entropy oxynitrides. These strategies can enhance the photocatalytic efficiency compared with conventional and benchmark photocatalysts by improving CO2 adsorption, increasing light absorbance, aligning the band structure, narrowing the bandgap, accelerating the charge carrier migration, suppressing the recombination rate of electrons and holes, and providing active sites for photocatalytic reactions. This article reviews recent progress in the application of SPD to develop functional ceramics for photocatalytic CO2 conversion.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO₂ reduction, and wastewater treatment.

Facile One-Pot Synthesis of Nickel Nanoparticles by Hydrothermal Method

The one-pot synthesis process has emerged as an economical synthesis method without the involvement of purification or formation of intermediate compounds. Therefore, nickel nanoparticles were selectively synthesized by a simple hydrothermal method using nickel(II) chloride hexahydrate and borane-ammonia complex as a precursor and reducing agent, respectively. The morphology and crystal growth were observed by controlling the precursor concentration ratio of Ni:AB from 1:0.1 to 1:4 under various temperatures ranging from 80 to 140 degrees. In addition, we observed that the crystal growth rate under the influence of NaCl and KCl resulted in spherical Ni particles with size distributions controlled in the range of 297.65 nm to 1082.15 nm and 358.6 nm to 605 nm, respectively.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Progress and perspectives on 1D nanostructured catalysts applied in photo(electro)catalytic reduction of CO2

Reducing CO₂ into value-added chemicals and fuels by artificial photosynthesis (photocatalysis and photoelectrocatalysis) is one of the considerable solutions to global environmental and energy issues. One-dimensional (1D) nanostructured catalysts (nanowires, nanorods, nanotubes and so on.) have attracted extensive attention due to their superior light-harvesting ability, co-catalyst loading capacity, and high carrier separation rate. This review analyzed the basic principle of the photo(electro)catalytic CO₂ reduction reaction (CO₂ RR) briefly. The preparation methods and properties of 1D nanostructured catalysts are introduced. Next, the applications of 1D nanostructured catalysts in the field of photo(electro)catalytic CO₂ RR are introduced in detail. In particular, we introduced the design of composite catalysts with 1D nanostructures, for example loading 0D, 1D, 2D, and 3D materials on a 1D nanostructured semiconductor to construct a heterojunction to optimize the photo-response range, carrier separation and transport efficiency, CO₂ adsorption and activation capacity, and stability of the catalyst. Finally, the development prospects of 1D nanostructured catalysts are discussed and summarized. This review can provide guidance for the rational design of advanced catalysts for photo(electro)catalytic CO₂ RR.

Fluid Field Modulation in Mass Transfer for Efficient Photocatalysis

Mass transfer is an essential factor determining photocatalytic performance, which can be modulated by fluid field via manipulating the kinetic characteristics of photocatalysts and photocatalytic intermediates. Past decades have witnessed the efforts and achievements made in manipulating mass transfer based on photocatalyst structure and composition design, and thus, a critical survey that scrutinizes the recent progress in this topic is urgently necessitated. This review examines the basic principles of how mass transfer behavior impacts photocatalytic activity accompanying with the discussion on theoretical simulation calculation including fluid flow speed and pattern. Meanwhile, newly emerged viable photocatalytic micro/nanomotors with self-thermophoresis, self-diffusiophoresis, and bubble-propulsion mechanisms as well as magnet-actuated photocatalytic artificial cilia for facilitating mass transfer will be covered. Furthermore, their applications in photocatalytic hydrogen evolution, carbon dioxide reduction, organic pollution degradation, bacteria disinfection and so forth are scrutinized. Finally, a brief summary and future outlook are presented, providing a viable guideline to those working in photocatalysis, mass transfer, and other related fields.

Photochemistry Journey to Multielectron and Multiproton Chemical Transformation

The odyssey of photochemistry is accompanied by the journey to manipulate "electrons" and "protons" in time, in space, and in energy. Over the past decades, single-electron (1e^-) photochemical transformations have brought marvelous achievements. However, as each photon absorption typically generates only one exciton pair, it is exponentially challenging to accomplish multielectron and proton photochemical transformations. The multistep differences in thermodynamics and kinetics urgently require us to optimize light harvesting, expedite consecutive electron transfer, manipulate the interaction of catalysts with substrates, and coordinate proton transfer kinetics to furnish selective bond formations. Tandem catalysis enables orchestrating different photochemical events and catalytic transformations from subpicoseconds to seconds, which facilitates multielectron redox chemistries and brings consecutive, value-added reactivities. Joint efforts in molecular and material design, mechanistic understanding, and theoretical modeling will bring multielectron and proton synthetic opportunities for fuels, fertilizers, and chemicals with enhanced versatility, efficiency, selectivity, and scalability, thus taking better advantage of photons (i.e., sunlight) for our sustainable society.

Emerging Synthesis Strategies of 2D MOFs for Electrical Devices and Integrated Circuits

The development of advanced electronic devices is boosting many aspects of modern technology and industry. The ever-increasing demand for advanced electrical devices and integrated circuits calls for the design of novel materials, with superior properties for the improvement of working performance. In this review, a detailed overview of the synthesis strategies of 2D metal organic frameworks (MOFs) acquiring growing attention is presented, as a basis for expansion of novel key materials in electrical devices and integrated circuits. A framework of controllable synthesis routes to be implanted in the synthesis strategies of 2D materials and MOFs is described. In short, the synthesis methods of 2D MOFs are summarized and discussed in depth followed by the illustrations of promising applications relating to various electrical devices and integrated circuits. It is concluded by outlining how 2D MOFs can be synthesized in a simpler, highly efficient, low-cost, and more environmentally friendly way which can open up their applicable opportunities as key materials in advanced electrical devices and integrated circuits, enabling their use in broad aspects of the society.

Wood-Derived Monolithic Catalysts with the Ability of Activating Water Molecules for Oxygen Electrocatalysis

Oxygen reduction reaction (ORR) is the key reaction on cathode of rechargeable zinc-air batteries (ZABs). However, the lack of protons in alkaline conditions limits the rate of ORR. Herein, an activating water strategy is proposed to promote oxygen electrocatalytic activity by enhancing the proton production from water dissociation. FeP nanoparticles (NPs) are coupled on N-doped wood-derived catalytically active carbon (FeP-NWCC) to associate bifunctional active sites. In alkaline, FeP-NWCC possesses outstanding catalytic activities toward ORR (E_1/2  = 0.86 V) and Oxygen evolution reaction (OER) (overpotential is 310 mV at 10 mA cm^-2 ). The liquid ZABs assembled by FeP-NWCC deliver superior peak power density (144 mW cm^-2 ) and cycle stability (over 450 h). The quasi-solid-state ZABs based on FeP-NWCC also display excellent performances. Theoretical calculation illustrates that the superb bifunctional performance of FeP-NWCC results from the elevated dissociation efficiency of water via FeP NPs to assist the oxygen catalytic process. The strategy of activating water provides a new perspective for the design of ORR/OER bifunctional catalysts. This work is a model for the application of forest biomass.

Metal-Organic Frameworks Functionalized Separators for Lithium-Sulfur Batteries

Lithium sulfur batteries (LSBs) have attracted tremendous attention owing to their high theoretical specific capacity and specific energy. However, their practical applications are hindered by poor cyclic life, mainly caused by polysulfide shuttling. The development of advanced materials to mitigate the polysulfide shuttling effect is urgently demanded. Metal-organic frameworks (MOFs) have been exploited as multifunctional materials for the decoration of separators owing to their high surface area, structural diversity, tunable pore size, and easy tailor ability. In this review, we aim to present the state-of-the-art MOF-based separators for LSBs. Particular attention is paid to the rational design (pore aperture, metal node, functionality, and dimension) of MOFs with enhanced ability for anchoring polysulfides and facilitating Li⁺ transportation. Finally, the challenges and perspectives are provided regarding to the future design MOF-based separators for high-performance LSBs.

Multi-channel charge transfer of hierarchical TiO2 nanosheets encapsulated MIL-125(Ti) hollow nanodisks sensitized by ZnSe for efficient CO2 photoreduction

Metal-organic frameworks-based hybrids with desirable components, structures, and properties have been proven to be promising functional materials for photocatalysis and energy conversion applications. Herein, we proposed and prepared ZnSe sensitized hierarchical TiO₂ nanosheets encapsulated MIL-125(Ti) hollow nanodisks with sandwich-like structure (MIL-125(Ti)@TiO₂\ZnSe HNDs) through a successive solvothermal and selenylation reaction route using the as-prepared MIL-125(Ti) nanodisks as precursor. In the ternary MIL-125(Ti)@TiO₂\ZnSe HNDs hybrid, TiO₂ nanosheets were transformed from MIL-125(Ti) and in situ grown on both sides of the MIL-125(Ti) shell, forming sandwich-like hollow nanodisks, and the ratio of MIL-125(Ti)/TiO₂ can be tuned by changing the solvothermal time. The ternary hybrids possess the advantages of enhanced incident light utilization and abundant accessible active sites originating from bimodal pore-size distribution and hollow sandwich-like heterostructure, which can effectively promote CO₂ photoreduction reaction. Especially, the formed multi-channel charge transfer routes in the ternary heterojunctions contribute to the charge transfer/separation and extend the lifespan of charge-separated state, thus boosting CO₂ photoreduction performance. The CO (513.1 μmol g^-1h^-1) and CH₄ (45.1 μmol g^-1h^-1) evolution rates over the optimized ternary hybrid were greatly enhanced compared with the single-component and binary hybrid photocatalysts.

Ru Colloidosome Catalysts for the Hydrogen Oxidation Reaction in Alkaline Media

Developing efficient hydrogen oxidation reaction (HOR) electrocatalysts in alkaline media is of great significance for anion exchange membrane fuel cells. Herein, we report the synthesis of hollow colloidosomes composed of Ru nanocrystals based on a novel gas/liquid interface self-assembly strategy. Structural characterizations reveal that much defects are present in the building block (Ru nanocrystals) of Ru colloidosomes. Theoretical calculations suggest that the defects in the Ru structure can optimize the adsorption binding energy of reaction intermediates for the HOR. Benefiting from the assembled colloidosome and optimized electronic structure, the Ru colloidosomes exhibit remarkable HOR catalytic performance in alkaline media with a mass activity higher than that of benchmark Pt/C. Our work may shed new light on the rational design of advanced electrocatalysts with an assembled structure for energy-related applications.

Surface Modification of 2D Photocatalysts for Solar Energy Conversion

2D materials show many particular properties, such as high surface-to-volume ratio, high anisotropic degree, and adjustable chemical functionality. These unique properties in 2D materials have sparked immense interest due to their applications in photocatalytic systems, resulting in significantly enhanced light capture, charge-transfer kinetics, and surface reaction. Herein, the research progress in 2D photocatalysts based on varied compositions and functions, followed by specific surface modification strategies, is introduced. Fundamental principles focusing on light harvesting, charge separation, and molecular adsorption/activation in the 2D-material-based photocatalytic system are systemically explored. The examples described here detail the use of 2D materials in various photocatalytic energy-conversion systems, including water splitting, carbon dioxide reduction, nitrogen fixation, hydrogen peroxide production, and organic synthesis. Finally, by elaborating the challenges and possible solutions for developing these 2D materials, the review is expected to provide some inspiration for the future research of 2D materials used on efficient photocatalytic energy conversions.

Free-Standing Nanoarrays with Energetic Electrons and Active Sites for Efficient Plasmon-Driven Ammonia Synthesis

Direct ammonia (NH₃ ) synthesis from water and atmospheric nitrogen using sunlight provides an energy-sustainable and carbon-neutral alternative to the Haber-Bosch process. However, the development of such a route with high performance is impeded by the lack of effective charge transfer and abundant active sites to initiate the nitrogen reduction reaction (NRR). Here, the authors report efficient plasmon-induced photoelectrochemical (PEC) NH₃ synthesis on the hierarchical free-standing Au/K_x MoO₃ /Mo/K_x MoO₃ /Au nanoarrays. Endowed with energetically hot electrons and catalytically active sites, the plasmonic nanoarrays exhibit an efficient PEC NH₃ synthesis rate of 9.6 µg cm^-2 h^-1 under visible light irradiation, which is among the highest PEC NRR systems. This work demonstrates the rationally designed plasmonic nanoarrays for highly efficient NH₃ synthesis, which paves a new path for PEC catalytic reactions driven by surface plasmons and future monolithic PEC devices for direct artificial photosynthesis.

Rational Regulation of Crystalline/Amorphous Microprisms-Nanochannels Based on Molecular Sieve (VSB-5) for Electrochemical Overall Water Splitting

Rational regulation of the composition and structure of electrocatalysts is crucial to the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, a new electrocatalyst of nickel phosphate microprism (VSB/NiPO) is developed via a simple solvothermal reaction. The microprism is mainly composed of Versailles-Santa Barbara-5 (VSB-5, molecular sieve) with unique nanochannels, which contribute to accelerating mass transfer and exposing more active sites, thus displaying excellent HER activity. Subsequently, the crystallinity and electronic structure of the framework are modulated by incorporating Fe with the combination of calcination and impregnation. The nanochannels are converted to the amorphous arrangement, and the Ni centers are regulated to the higher valence. The resultant Fe-VSB/NiPO-500 exhibits a low OER overpotential of 227 mV at 50 mA cm^-2 . Interestingly, an integrated electrolyzer assembled by VSB/NiPO(-) and Fe-VSB/NiPO-500(+) performs well for overall water splitting, which requires only 1.487 V to achieve 10 mA cm^-2 , and remains stable at 100 mA cm^-2 over 100 h. This finding opens a new avenue for developing VSB-5 in the field of electrocatalysis.

Two-Dimensional Metal-Organic Framework Nanosheets: Synthesis and Applications in Electrocatalysis and Photocatalysis

Two-dimensional metal-organic nanosheets (2D MONs) are an emerging class of ultrathin, porous, and crystalline materials. The organic/inorganic hybrid nature offers MONs distinct advantages over other inorganic nanosheets in terms of diversity of organic ligands and metal notes. Compared to bulk three-dimensional metal-organic frameworks, 2D MONs possess merits of high density and readily accessible catalytic sites, reduced diffusion pathways for reactants/products, and fast electron transport. These features endow MONs with enhanced physical/chemical properties and are ideal for heterogeneous catalysis. In this Review, state-of-the-art synthetic methods for the fabrication of 2D MONs were summarized. The advances of 2D MONs-based materials for electrocatalysis and photocatalysis, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂ RR), and electro-/photocatalytic organic transformations were systematically discussed. Finally, the challenges and perspectives regarding future design and synthesis of 2D MONs for high-performance electrocatalysis and photocatalysis were provided.