Surface Functionalization and Texturing of Optical Metasurfaces for Sensing Applications

LSPR-susceptible metasurface platform for spectrometer-less and AI-empowered diagnostic biomolecule detection

In response to the growing demand for biomolecular diagnostics, metasurface (MS) platforms based on high-Q resonators have demonstrated their capability to detect analytes with smart data processing and image analysis technologies. However, high-Q resonator meta-atom arrays are highly sensitive to the fabrication process and chemical surface functionalization. Thus, spectrum scanning systems are required to monitor the resonant wavelength changes at every step, from fabrication to practical sensing. In this study, we propose an innovative dielectric resonator-independent MS platform that enables spectrometer-less biomolecule detection using artificial intelligence (AI) at a visible wavelength. Functionalizing the focused vortex MS to capture gold nanoparticle (AuNP)-based sandwich immunoassays causes the resulting vortex beam profiles to be significantly affected by the localized surface plasmon resonance (LSPR) occurring between AuNPs and meta-atoms. The convolutional neural network algorithm was carefully trained to accurately classify the AuNP concentration-dependent focused vortex beam, facilitating the determination of the concentration of the targeted diagnostic biomolecule. Successful in situ identification of various biomolecule concentrations was achieved with over 99 % accuracy, indicating the potential of combining an LSPR-susceptible MS platform and AI for continuously tracking various chemical and biological compounds.

Single-molecule detection of SARS-CoV-2 N protein on multilayered plasmonic nanotraps with surface-enhanced Raman spectroscopy

The spread of the SARS-CoV-2 virus has had an unprecedented impact, both by posing a serious risk to human health and by amplifying the burden on the global economy. The rapid identification of the SARS-CoV-2 virus has been crucial to preventing and controlling the spread of SARS-CoV-2 infections. In this study, we propose a multilayered plasmonic nanotrap (MPNT) device for the rapid identification of single particles of SARS-CoV-2 virus in ultra-high sensitivity by surface-enhanced Raman scattering (SERS). The MPNT device is composed of arrays of concentric cylindrical cavities with Ag/SiO2/Ag multilayers deposited on the top and at the bottom. By varying the diameter of the cylinders and the thickness of the multilayers, the resonant optical absorption and local electric field were optimized. The SERS enhancement factors of the proposed device are of the order of 108, which enable the rapid identification of SARS-CoV-2 N protein in concentrations as low as 1.25 × 10-15－12.5 × 10-15 g mL-1 within 1 min. The developed MPNT SERS device provides a label-free and rapid detection platform for SARS-CoV-2 virus. The general nature of the device makes it equally suitable to detect other infectious viruses.

Agile Inverse Design of Polarization-Independent Multi-Functional Reconfiguration Metamaterials Based on Doped VO2

Increasing attention is being paid to the application potential of multi-functional reconfigurable metamaterials in intelligent communication, sensor networks, homeland security, and other fields. A polarization-independent multi-functional reconfigurable metasurface based on doped vanadium dioxide (VO2) is proposed in this paper. It can be controlled to switch its function among three working modes: electromagnetically induced absorption (EIA), electromagnetically induced transparency (EIT), and asymmetrical absorption. In addition, deep learning tools have greatly accelerated the design of relevant devices. Such devices and the method proposed in this paper have important value in the field of intelligent reconfigurable metamaterials, communication, and sensing.

Recent advances in the metamaterial and metasurface-based biosensor in the gigahertz, terahertz, and optical frequency domains

Recently, metamaterials and metasurface have gained rapidly increasing attention from researchers due to their extraordinary optical and electrical properties. Metamaterials are described as artificially defined periodic structures exhibiting negative permittivity and permeability simultaneously. Whereas metasurfaces are the 2D analogue of metamaterials in the sense that they have a small but not insignificant depth. Because of their high optical confinement and adjustable optical resonances, these artificially engineered materials appear as a viable photonic platform for biosensing applications. This review paper discusses the recent development of metamaterial and metasurface in biosensing applications based on the gigahertz, terahertz, and optical frequency domains encompassing the whole electromagnetic spectrum. Overlapping features such as material selection, structure, and physical mechanisms were considered during the classification of our biosensing applications. Metamaterials and metasurfaces working in the GHz range provide prospects for better sensing of biological samples, THz frequencies, falling between GHz and optical frequencies, provide unique characteristics for biosensing permitting the exact characterization of molecular vibrations, with an emphasis on molecular identification, label-free analysis, and imaging of biological materials. Optical frequencies on the other hand cover the visible and near-infrared regions, allowing fine regulation of light-matter interactions enabling metamaterials and metasurfaces to offer excellent sensitivity and specificity in biosensing. The outcome of the sensor's sensitivity to an electric or magnetic field and the resonance frequency are, in theory, determined by the frequency domain and features. Finally, the challenges and possible future perspectives in biosensing application areas have been presented that use metamaterials and metasurfaces across diverse frequency domains to improve sensitivity, specificity, and selectivity in biosensing applications.

Advancements and Perspectives in Optical Biosensors

Optical biosensors exhibit immense potential, offering extraordinary possibilities for biosensing due to their high sensitivity, reusability, and ultrafast sensing capabilities. This review provides a concise overview of optical biosensors, encompassing various platforms, operational mechanisms, and underlying physics, and it summarizes recent advancements in the field. Special attention is given to plasmonic biosensors and metasurface-based biosensors, emphasizing their significant performance in bioassays and, thus, their increasing attraction in biosensing research, positioning them as excellent candidates for lab-on-chip and point-of-care devices. For plasmonic biosensors, we emphasize surface plasmon resonance (SPR) and its subcategories, along with localized surface plasmon resonance (LSPR) devices and surface enhance Raman spectroscopy (SERS), highlighting their ability to perform diverse bioassays. Additionally, we discuss recently emerged metasurface-based biosensors. Toward the conclusion of this review, we address current challenges, opportunities, and prospects in optical biosensing. Considering the advancements and advantages presented by optical biosensors, it is foreseeable that they will become a robust and widespread platform for early disease diagnostics.

Flexible wafer-scale bifunctional metasurface based on nanoimprinting

Metasurfaces have demonstrated remarkable capabilities in manipulating light fields across diverse applications. However, current research tends to examine these functionalities in isolation, prompting a growing interest in integrating different functionalities within a singular metasurface device. In this paper, we propose and experimentally demonstrate a bifunctional metasurface capable of providing concealment and sensing functions simultaneously. Specifically, the proposed nanostructure effectively operates as a one-way mirror, exhibiting an average reflection rate of approximately 90% under external illumination, alongside an absorption rate of 87.9% from the opposite direction of incidence. This functionality renders it suitable for privacy-enhancing building windows. Meanwhile, this nanostructure also integrates liquid sensing capabilities boasting a sensitivity of 464 nm/RIU, which is particularly valuable for monitoring liquid-based corrosion. The experimental performance of the prepared 6-inch nanohole-patterned metasurface closely aligns with the simulations, and the utilization of flexible polyethylene terephthalate (PET) film, coupled with nanoimprint lithography technology, enables a direct and cost-effective manufacturing process that can be scaled up for widespread applications.

Pixelated High-Q Metasurfaces for in Situ Biospectroscopy and Artificial Intelligence-Enabled Classification of Lipid Membrane Photoswitching Dynamics

Nanophotonic devices excel at confining light into intense hot spots of electromagnetic near fields, creating exceptional opportunities for light-matter coupling and surface-enhanced sensing. Recently, all-dielectric metasurfaces with ultrasharp resonances enabled by photonic bound states in the continuum (BICs) have unlocked additional functionalities for surface-enhanced biospectroscopy by precisely targeting and reading out the molecular absorption signatures of diverse molecular systems. However, BIC-driven molecular spectroscopy has so far focused on end point measurements in dry conditions, neglecting the crucial interaction dynamics of biological systems. Here, we combine the advantages of pixelated all-dielectric metasurfaces with deep learning-enabled feature extraction and prediction to realize an integrated optofluidic platform for time-resolved in situ biospectroscopy. Our approach harnesses high-Q metasurfaces specifically designed for operation in a lossy aqueous environment together with advanced spectral sampling techniques to temporally resolve the dynamic behavior of photoswitchable lipid membranes. Enabled by a software convolutional neural network, we further demonstrate the real-time classification of the characteristic cis and trans membrane conformations with 98% accuracy. Our synergistic sensing platform incorporating metasurfaces, optofluidics, and deep learning reveals exciting possibilities for studying multimolecular biological systems, ranging from the behavior of transmembrane proteins to the dynamic processes associated with cellular communication.

Advances in flame synthesis of nano-scale architectures for chemical, biomolecular, plasmonic, and light sensing

Flame spray pyrolysis (FSP), a key technique under the broader category of flame aerosol synthesis, is being increasingly explored for the design of advanced miniaturized sensor architectures with applications including chemical, biomolecular, plasmonic, and light sensing. This review provides an overview of the advantages of FSP for the fabrication of nanostructured materials for sensing, delving into synthesis strategies and material structures that meet the increasing demands for miniaturized sensor devices. We focus on the fundamentals of FSP, discussing reactor configurations and how process parameters such as precursor compositions, flow rates, and temperature influence nanoparticle characteristics and their sensing performance. A detailed analysis of nanostructures, compositions, and morphologies made by FSP and their applications in chemical, chemiresistive, plasmonic, biosensing, and light sensing is presented. This review identifies the challenges and opportunities of FSP, exploring current limitations and potential improvements for industrial translation. We conclude by highlighting future research directions aiming to establish guidelines for the flame-based design of nano-scale sensing architectures.

Polarization-separating Alvarez metalens

The rapid advancements in optical communication technologies have highlighted traditional optical components' limitations, particularly in size, adaptability, and integration capabilities, underscoring the need for more compact and versatile solutions. Metalenses offer a promising pathway to address these challenges, with their ability to provide high-functionality, miniaturized optical components. We developed a varifocal metalens with a polarization separation function designed for the wavelength of 1550 nm for potential application for next-generation communication technologies. To integrate the varifocal and polarization separation functions, polarization-dependent phase profiles for an off-axis Alvarez lens were derived and encoded by amorphous silicon pillar meta-atoms with rectangular cross sections to provide independent 0-2π phase delays for both orthogonal linear polarization components. The fabricated metalens achieved a varifocal range of 0.75 mm to 10.65 mm and a polarization extinction ratio of 18.5 dB.

Dual layer chessboard metasurface sandwiched by a spin-on-carbon for spectral modulation

Metasurfaces, composed by metals and dielectrics in periodical order with subwavelength pitches, are of great importance for their unique ability to abruptly manipulate optical fields. So far, all the reported metasurfaces are constructed by thermally deposited metals and dielectric films, based on semiconductor processes which are expensive and time-consuming. Inspired by the outstanding dry etch property of spin-on-carbon (SOC) as the interlayer material in CMOS technology, this paper proposes to utilize the SOC as the dielectric layer in a chessboard metasurface with dual layer of gold to form an array of local surface plasmonic resonators (localized surface plasmon resonance). Finite difference and time domain (FDTD) method is used to investigate the spectral characteristics in reflectance of the metasurface in both visible and short wavelengths of infrared light. Electron beam lithography is applied to generate the nanoscale chessboard pattern on ZEP520A, followed by a conventional oxygen-based plasma etch to form high aspect ratio nanopillar arrays in SOC with the feature width under 50 nm, and ended by a thermal deposition of gold to form self-aligned dual layer local surface plasmonic resonators (LSPRs). The measured reflectance spectra agree with the simulated. A wealth of optical properties, such as coupling induced modulations of spectra by LSPRs, are revealed and analyzed. These special modes result in tunable structural colors and wavelength-selective antireflection ability. To the best of our knowledge, this is the first time that SOC is applied in the construction of metasurfaces, which has great potential for next generation nanophotonic devices.

Massively Scalable Self-Assembly of Nano and Microparticle Monolayers via Aerosol Assisted Deposition

An extremely rapid process for self-assembling well-ordered, nano, and microparticle monolayers via a novel aerosolized method is presented. The novel technique can reach monolayer self-assembly rates as high as 268 cm2 min-1 from a single aerosolizing source and methods to reach faster monolayer self-assembly rates are outlined. A new physical mechanism describing the self-assembly process is presented and new insights enabling high-efficiency nanoparticle monolayer self-assembly are developed. In addition, well-ordered monolayer arrays from particles of various sizes, surface functionality, and materials are fabricated. This new technique enables a 93× increase in monolayer self-assembly rates compared to the current state of the art and has the potential to provide an extremely low-cost option for submicron nanomanufacturing.

Label-free biosensing with singular-phase-enhanced lateral position shift based on atomically thin plasmonic nanomaterials

Rapid plasmonic biosensing has attracted wide attention in early disease diagnosis and molecular biology research. However, it was still challenging for conventional angle-interrogating plasmonic sensors to obtain higher sensitivity without secondary amplifying labels such as plasmonic nanoparticles. To address this issue, we developed a plasmonic biosensor based on the enhanced lateral position shift by phase singularity. Such singularity presents as a sudden phase retardation at the dark point of reflection from resonating plasmonic substrate, leading to a giant position shift on reflected beam. Herein, for the first time, the atomically thin layer of Ge2Sb2Te5 (GST) on silver nanofilm was demonstrated as a novel phase-response-enhancing plasmonic material. The GST layer was not only precisely engineered to singularize phase change but also served as a protective layer for active silver nanofilm. This new configuration has achieved a record-breaking largest position shift of 439.3 μm measured in calibration experiments with an ultra-high sensitivity of 1.72 × 108 nm RIU-1 (refractive index unit). The detection limit was determined to be 6.97 × 10-7 RIU with a 0.12 μm position resolution. Besides, a large figure of merit (FOM) of 4.54 × 1011 μm (RIU∙°)-1 was evaluated for such position shift interrogation, enabling the labelfree detection of trace amounts of biomolecules. In targeted biosensing experiments, the optimized sensor has successfully detected small cytokine biomarkers (TNF-α and IL-6) with the lowest concentration of 1 × 10-16 M. These two molecules are the key proinflammatory cancer markers in clinical diagnosis, which cannot be directly screened by current clinical techniques. To further validate the selectivity of our sensing systems, we also measured the affinity of integrin binding to arginylglycylaspartic acid (RGD) peptide (a key protein interaction in cell adhesion) with different Mn2+ ion concentrations, ranging from 1 nM to 1 mM.

Dielectric Tetramer Nanoresonators Supporting Strong Superchiral Fields for Vibrational Circular Dichroism Spectroscopy

Chirality (C) is a fundamental property of objects, in terms of symmetry. It is extremely important to sense and distinguish chiral molecules in the fields of biochemistry, science, and medicine. Vibrational circular dichroism (VCD) spectroscopy, obtained from the differential absorption of left- and right- circularly polarized light (CPL) in the infrared range, is a promising technique for enantiomeric detection and separation. However, VCD signals are typically very weak for most small molecules. Dielectric metasurfaces are an emerging platform to enhance the sensitivity of VCD spectroscopy of chiral molecules via superchiral field manipulation. Here, we demonstrate a dielectric metasurface consisting of achiral germanium (Ge) tetramer nanoresonators that provide a proper and accessible high C enhancement (CE). We realize a maximum C enhancement (CE_max) with respect to the incident CPL (CE_max = Cmax/CRCP) of more than 750. The volume-averaged C enhancement (CE_ave = Cave/CRCP) is 148 in the 50 nm thick region above the sample surface and 215 in the central region of the structure. Especially, the corresponding CE_ave values are more than 89 and 183 even when a 50 nm thick chiral lossy molecular layer is coated on the metasurface. The metasurface benefits from geometrically achiral nanostructure design to eliminate intrinsic background chiral-optical signal from the substrate, which is useful in chiral sensing, enantioselectivity, and VCD spectroscopy applications in the mid-infrared range.

Tuning the Functionality of Self-Assembled 2D Platelets in the Third Dimension

The decoration of 2D nanostructures using heteroepitaxial growth is of great importance to achieve functional assemblies employed in biomedical, electrical, and mechanical applications. Although the functionalization of polymers before self-assembly has been investigated, the exploration of direct surface modification in the third dimension from 2D nanostructures has, to date, been unexplored. Here, we used living crystallization-driven self-assembly to fabricate poly(ε-caprolactone)-based 2D platelets with controlled size. Importantly, surface modification of the platelets in the third dimension was achieved by using functional monomers and light-induced polymerization. This method allows us to selectively regulate the height and fluorescence properties of the nanostructures. Using this approach, we gained unprecedented spatial control over the surface functionality in the specific region of complex 2D platelets.

Integrated metasurfaces for re-envisioning a near-future disruptive optical platform

Metasurfaces have been continuously garnering attention in both scientific and industrial fields, owing to their unprecedented wavefront manipulation capabilities using arranged subwavelength artificial structures. To date, research has mainly focused on the full control of electromagnetic characteristics, including polarization, phase, amplitude, and even frequencies. Consequently, versatile possibilities of electromagnetic wave control have been achieved, yielding practical optical components such as metalenses, beam-steerers, metaholograms, and sensors. Current research is now focused on integrating the aforementioned metasurfaces with other standard optical components (e.g., light-emitting diodes, charged-coupled devices, micro-electro-mechanical systems, liquid crystals, heaters, refractive optical elements, planar waveguides, optical fibers, etc.) for commercialization with miniaturization trends of optical devices. Herein, this review describes and classifies metasurface-integrated optical components, and subsequently discusses their promising applications with metasurface-integrated optical platforms including those of augmented/virtual reality, light detection and ranging, and sensors. In conclusion, this review presents several challenges and prospects that are prevalent in the field in order to accelerate the commercialization of metasurfaces-integrated optical platforms.

Bifunctional electrospun poly (L-lactic acid) membranes incorporating black phosphorus nanosheets and nano-zinc oxide for enhanced biocompatibility and antibacterial properties in catheter materials

For several decades, urinary tract infections caused by catheter-associated devices have negatively impacted not only medical device utilization, but also patient health. As such, the creation of catheter materials with both superior biocompatibility and antibacterial properties has become necessary. This study aimed to produce electrospun membranes based on polylactic acid (PLA) with the incorporation of black phosphorus nanosheets (BPNS) and nano-zinc oxide (nZnO) particles, as well as a mixture of both, in order to design bifunctional membranes with enhanced bioactivity and antibacterial features. The optimum spinning process was determined through examination of various PLA mass concentrations, spinning solution propelling speeds, and receiving drum rotating speeds, with emphasis on the mechanical properties of PLA membranes. Additionally, the antibacterial properties and cytocompatibility of the ZnO-BP/PLA antibacterial membranes were explored. Results demonstrated that the ZnO-BP/PLA antibacterial membranes displayed a rich porous structure, with uniform distribution of nZnO particles and BPNS. With the increase of polylactic acid concentration and the decrease of spinning solution advancing and drum rotation speeds, the mechanical properties of the fiber membrane were significantly improved. Furthermore, the composite membranes exhibited remarkable photothermal therapy (PTT) capabilities when aided by the synergistic effect of BP nanosheets and ZnO. This was achieved through near-infrared (NIR) irradiation, which not only dissipated the biofilm but also enhanced the release capability of Zn²⁺. Consequently, the composite membrane demonstrated an improved inhibitory effect on both Escherichia coli and Staphylococcus aureus. The results of cytotoxicity and adhesion experiments also indicated good cytocompatibility, with cells growing normally on the surface of the ZnO-BP/PLA antibacterial membrane. Overall, these findings validate the utilization of both BPNS and n-ZnO fillers in the creation of novel bifunctional PLA-based membranes, which possess both biocompatibility and antibacterial properties for interventional catheter materials.

Quasi-symmetry-protected BICs in a double-notched silicon nanodisk metasurface

Bound states in the continuum (BICs) hold great promise in enhancing light-matter interaction as they have an infinite Q-factor. To date, the symmetry-protected BIC (SP-BIC) is one of the most intensively studied BICs because it is easily found in a dielectric metasurface satisfying certain group symmetry. To convert SP-BICs into quasi-BICs (QBICs), structural symmetry shall be broken so that external excitation can access them. Usually, the unit cell's asymmetry is created by removing or adding parts of dielectric nanostructures. The QBICs are usually excited only by s-polarized or p-polarized light because of the symmetry-breaking of the structure. In this work, we investigate the excited QBIC properties by introducing double notches on the edges of highly symmetrical silicon nanodisks. The QBIC shares the same optical response under the s-polarized and p-polarized light. The effect of polarization on coupling efficiency between the QBIC mode and incident light is studied, and the highest coupling efficiency occurs at a polarization angle of 135 ^∘, which corresponds to the radiative channel. Moreover, the near-field distribution and multipole decomposition confirm that the QBIC is dominated by the magnetic dipole along the z direction. It is noted that the QBIC covers a wide spectrum region. Finally, we present an experimental confirmation; the measured spectrum shows a sharp Fano resonance with a Q-factor of 260. Our results suggest promising applications in enhancing light-matter interaction, such as lasing, sensing, and nonlinear harmonic generation.

Recent Development in Metasurfaces: A Focus on Sensing Applications

One of the fastest-expanding study areas in optics over the past decade has been metasurfaces (MSs). These subwavelength meta-atom-based ultrathin arrays have been developed for a broad range of functions, including lenses, polarization control, holography, coloring, spectroscopy, sensors, and many more. They allow exact control of the many properties of electromagnetic waves. The performance of MSs has dramatically improved because of recent developments in nanofabrication methods, and this concept has developed to the point that it may be used in commercial applications. In this review, a vital topic of sensing has been considered and an up-to-date study has been carried out. Three different kinds of MS absorber sensor formations, all-dielectric, all-metallic, and hybrid configurations, are presented for biochemical sensing applications. We believe that this review paper will provide current knowledge on state-of-the-art sensing devices based on MSs.

Electrodetection of Small Molecules by Conformation-Mediated Signal Enhancement

Electrochemical biosensors allow the rapid, selective, and sensitive transduction of critical biological parameters into measurable signals. However, current electrochemical biosensors often fail to selectively and sensitively detect small molecules because of their small size and low molecular complexity. We have developed an electrochemical biosensing platform that harnesses the analyte-dependent conformational change of highly selective solute-binding proteins to amplify the redox signal generated by analyte binding. Using this platform, we constructed and characterized two biosensors that can sense leucine and glycine, respectively. We show that these biosensors can selectively and sensitively detect their targets over a wide range of concentrations-up to 7 orders of magnitude-and that the selectivity of these sensors can be readily altered by switching the bioreceptor's binding domain. Our work represents a new paradigm for the design of a family of modular electrochemical biosensors, where access to electrode surfaces can be controlled by protein conformational changes.

Metasurfaces for Sensing Applications: Gas, Bio and Chemical

Performance of photonic devices critically depends upon their efficiency on controlling the flow of light therein. In the recent past, the implementation of plasmonics, two-dimensional (2D) materials and metamaterials for enhanced light-matter interaction (through concepts such as sub-wavelength light confinement and dynamic wavefront shape manipulation) led to diverse applications belonging to spectroscopy, imaging and optical sensing etc. While 2D materials such as graphene, MoS₂ etc., are still being explored in optical sensing in last few years, the application of plasmonics and metamaterials is limited owing to the involvement of noble metals having a constant electron density. The capability of competently controlling the electron density of noble metals is very limited. Further, due to absorption characteristics of metals, the plasmonic and metamaterial devices suffer from large optical loss. Hence, the photonic devices (sensors, in particular) require that an efficient dynamic control of light at nanoscale through field (electric or optical) variation using substitute low-loss materials. One such option may be plasmonic metasurfaces. Metasurfaces are arrays of optical antenna-like anisotropic structures (sub-wavelength size), which are designated to control the amplitude and phase of reflected, scattered and transmitted components of incident light radiation. The present review put forth recent development on metamaterial and metastructure-based various sensors.

Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems

Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.