Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

Fabrication of superior laccase-mimicking enzyme with catalytic oxidative and photothermal properties for anti-bacterial and dual-mode glutathione S-transferase monitoring

A novel laccase mimic enzyme Cu-Mn with excellent photothermal properties was firstly prepared via a combination of hydrothermal and in situ synthesis. Cu-Mn nanozymes could catalyze the typical laccase substrate 2,4-dichlorophenol (2,4-DP) to generate the red quinone imine. Further, loading the MnO2 nanosheets with photothermal properties, Cu-Mn nanozymes possessed not only excellent laccase catalytic activity, but also high photothermal conversion efficiency. The presence of glutathione S-transferase (GST) recovered the glutathione (GSH)-induced weakness of the laccase activity and photothermal properties of Cu-Mn. Hence, a GST enzyme-regulated dual-mode sensing strategy was established based on Cu-Mn nanozymes. The detection limits of GST monitoring based on colorimetric and photothermal methods were 0.092 and 0.087 U/L with response times of 20 min and 8 min, respectively. Furthermore, the proposed method enabled the measuring of GST levels in human serum and was successfully employed in the primary evaluation of hepatitis patients. Another attraction, the impressive photothermal behavior also endowed the Cu-Mn nanozymes with promising antimicrobial properties, which exhibited significant antimicrobial effects against Escherichia coli (E.coli) and Staphylococcus aureus (S.aureus). Unsurprisingly, multifunctional Cu-Mn nanozymes certainly explore new paths in biochemical analysis and antimicrobial applications.

Photo-Excited High-Spin State Ni (III) Species in Mo-Doped Ni3S2 for Efficient Urea Oxidation Reaction

Designing robust catalysts for increasing the sluggish kinetics of the urea oxidation reaction (UOR) is challenging. Herein, the regulation of spin states for metal active sites by photoexcitation to facilitate the adsorption of urea and intermediates is demonstrated. Mo-doped nickel sulfide nanoribbon arrays (Mo-Ni3S2@NMF) with excellent light-trapping capacity are successfully prepared. Under AM 1.5G illumination, the activity of the Mo-Ni3S2@NMF exhibits a 50% improvement in the UOR current. Compared with those under dark conditions, Mo-Ni3S2@NMF achieve 10 mA cm-2 at 1.315 VRHE for UOR and 1.32 Vcell for urea electrolysis, which are decreases of 15 and 80 mV, respectively. The electron spin resonance, in situ Fourier transform infrared spectroscopy analysis and density functional theory calculations reveal that illumination led to the formation of Ni3+ active sites in a high-spin state, which strengthens the d-p orbital hybridization of Ni-N, hence facilitating the adsorption of urea. C─N cleavage of the *CONN intermediate is further inhibited, which promotes the oxidation of urea molecules via the active N2 pathway, thereby accelerating the UOR rate.

Photothermal Enhancement of Prussian Blue Cathodes for Li-Ion Batteries

Photoenhanced batteries, where light improves the electrochemical performance of batteries, have gained much interest. Recent reports suggest that light-to-heat conversion can also play an important role. In this work, we study Prussian blue analogues (PBAs), which are known to have a high photothermal heating efficiency and can be used as cathodes for Li-ion batteries. PBAs were synthesized directly on a carbon collector electrode and tested under different thermally controlled conditions to show the effect of photothermal heating on battery performance. Our PBA electrodes reach temperatures that are 14% higher than reference electrodes using a blue LED, and a capacity enhancement of 38% was achieved at a current density of 1600 mA g-1. Additionally, these batteries show excellent cycling stability with a capacity retention of 96.6% in dark conditions and 94.8% in light over 100 cycles. Overall, this work shows new insights into the effects leading to improved battery performance in photobatteries.

Hierarchical Carbon Nanocages as Superior Supports for Photothermal CO2 Catalysis

The exploitation of hierarchical carbon nanocages with superior light-to-heat conversion efficiency, together with their distinct structural, morphological, and electronic properties, in photothermal applications could provide effective solutions to long-standing challenges in diverse areas. Here, we demonstrate the discovery of pristine and nitrogen-doped hierarchical carbon nanocages as superior supports for highly loaded, small-sized Ru particles toward enhanced photothermal CO2 catalysis. A record CO production rate of 3.1 mol·gRu-1·h-1 with above 90% selectivity in flow reactors was reached for hierarchical nitrogen-doped carbon-nanocage-supported Ru clusters under 2.4 W·cm-2 illumination without external heating. Detailed studies reveal that the enhanced performance originates from the strong broadband sunlight absorption and efficient light-to-heat conversion of nanocage supports as well as the excellent intrinsic catalytic reactivity of sub-2 nm Ru particles. Our study reveals the great potential of hierarchical carbon nanocages in photothermal catalysis to reduce the fossil fuel consumption of various industrial chemical processes and stimulates interest in their exploitation for other demanding photothermal applications.

Engineering the Blackbody Absorption of the Au-Branch-on-Au-Plate Heterostructures

Utilizing the strong ligand control effects of l-cysteine (l-Cys), the growth of Au on Au triangular nanoplate (AuTN) seeds was continuously tuned from layer-by-layer (the Frank-van der Merwe) to layer-plus-island (the Stranski-Krastanov), and island (the Volmer-Weber) growth modes, leading to the formation of a series of Au-on-AuTN heterostructures. Within the window of VW growth mode (featured by the growth of Au spikes and branches on AuTNs), the effective localized surface plasmon resonance (LSPR) coupling led to the selective strengthening of the "valley" absorptions, leading to smooth and flat absorption curves. Interestingly, through engineering the number/density, size, and branching degree of the Au branches, except for the black color, full spectrum absorption within 400-1300 nm wavelength was achieved on Au-branch-on-AuTN structures. Mechanistic studies revealed that the blackbody absorption property of the Au-branch-on-AuTN originates from the well-balanced intraparticle LSPR couplings among the neighboring Au branches. The tunable blackness and the full spectrum absorption property made the Au-branch-on-AuTN heterostructure a suitable candidate for various plasmonic-related applications, such as a wide spectrum light absorber, photoacoustic imaging contrast agent, and photothermal therapy medium. In addition, our strong ligand control in Au-branch-on-AuTN heterostructures could be extended to other hybrid systems with diverse material combinations, so long as to find the proper strong ligand.

Potentiating light-harvesting tactics through an A-D-A structure: repolarization of tumor-associated macrophages through phototherapy

Aiming to decrease the recurrence of tumors and achieve patient satisfaction, the elicitation of immunotherapy and its integrated synergistic employment is a bright new direction in oncotherapy, yet an emergently challenging task. In particular, tumor-associated macrophage (TAM) regulation though light-induced photodynamic and photothermal therapy (PDT and PTT) is regarded as a powerful approach, which focuses on the systemic immune system instead of the tumor itself. Herein, this study reports an acceptor-donor-acceptor (A-D-A) aggregation-induced emission luminogen (AIEgen), named TPA-2CN, which was applied as a photosensitizer (PS) and photothermal agent (PTA). Attributed to its A-D-A structure and AIE properties, TPA-2CN exhibits a high molar absorption coefficient and acts as a perfect template in regulating radiative and nonradiative transitions, which mainly utilize excited energy. The generation of type I reactive oxygen promoted its application in hypoxic tumor sites and the combination of hyperpyrexia forcefully induces macrophages to polarize towards the immune response M1 phenotype. In in vitro and in vivo, the successful reversion and reprogramming of the immune microenvironment was impressively proved. This method optimally concentrated immune therapy, PDT and PTT as one and exhibited excellent synergistic therapeutic effects with good biosafety.

Recent advances in oxidative degradation of plastics

Oxidative degradation is a powerful method to degrade plastics into oligomers and small oxidized products. While thermal energy has been conventionally employed as an external stimulus, recent advances in photochemistry have enabled photocatalytic oxidative degradation of polymers under mild conditions. This tutorial review presents an overview of oxidative degradation, from its earliest examples to emerging strategies. This review briefly discusses the motivation and the development of thermal oxidative degradation of polymers with a focus on underlying mechanisms. Then, we will examine modern studies primarily relevant to catalytic thermal oxidative degradation and photocatalytic oxidative degradation. Lastly, we highlight some unique studies using unconventional approaches for oxidative polymer degradation, such as electrochemistry.

Modeling and admittance recursive simulation of anti-reflective coatings for photothermal conversion: synergy between subwavelength structures and gradient refractive index layers

In the field of photothermal conversion, light-absorbing layers show limitations such as low solar energy utilization and excessive surface reflection. This paper proposes a new anti-reflective coating consisting of a gradient-doped fluorescent glass film covering a subwavelength structural layer for photothermal conversion. Its transmittance was simulated using equivalent medium theory and the admittance recursion method. The subwavelength structure provides a refractive index gradient, and its shape solves the problem of the sharp decrease in transmittance at high angles of incidence. Subsequently, we adjust the material parameters of the gradient refractive layers and control the thickness of each layer to minimize interlayer Fresnel reflections. Finally, the efficient light-trapping ability of the model was verified by calculating and comparing the transmittances of the optimized model and bare glass. Notably, within the visible spectrum, our model achieves an average transmittance of over 95% across wavelength and angle ranges, effectively suppressing surface reflections. At a larger light incident angle, the transmittance increases by 29.7%, and the minimum angle transmittance reaches 92.7%. This study proposes an innovative method to enhance the performance of transmission layers in photothermal conversion devices.

RuCo/ZrO2 Tandem Catalysts with Photothermal Confinement Effect for Enhanced CO2 Methanation

Photothermal CO2 methanation reaction represents a promising strategy for addressing CO2-related environmental issues. The presence of efficient tandem catalytic sites with a localized high-temperature is an effective pathway to enhance the performance of CO2 methanation. Here the bimetallic RuCo nanoparticles anchored on ZrO2 fiber cotton (RuCo/ZrO2) as a photothermal catalyst for CO2 methanation are prepared. A significant photothermal CO2 methanation performance with optimal CH4 selectivity (99%) and rate (169.93 mmol gcat -1 h-1) is achieved. The photothermal energy of the RuCo bimetallic nanoparticles, confined by the infrared insulation and low thermal conductivity of the ZrO2 fiber cotton (ZrO2 FC), provides a localized high-temperature. In situ spectroscopic experiments on RuCo/ZrO2, Ru/ZrO2, and Co/ZrO2 indicate that the construction of tandem catalytic sites, where the Co site favors CO2 conversion to CO while incorporating Ru enhances CO* adsorption for subsequent hydrogenation, results in a higher selectivity toward CH4. This work opens a new insight into designing tandem catalysts with a photothermal confinement effect in CO2 methanation reaction.

Photothermal CO2 conversion to ethanol through photothermal heterojunction-nanosheet arrays

Photothermal CO2 conversion to ethanol offers a sustainable solution for achieving net-zero carbon management. However, serious carrier recombination and high C-C coupling energy barrier cause poor performance in ethanol generation. Here, we report a Cu/Cu2Se-Cu2O heterojunction-nanosheet array, showcasing a good ethanol yield under visible-near-infrared light without external heating. The Z-scheme Cu2Se-Cu2O heterostructure provides spatially separated sites for CO2 reduction and water oxidation with boosted carrier transport efficiency. The microreactors induced by Cu2Se nanosheets improve the local concentration of intermediates (CH3* and CO*), thereby promoting C-C coupling process. Photothermal effect of Cu2Se nanosheets elevates system's temperature to around 200 °C. Through synergizing electron and heat flows, we achieve an ethanol generation rate of 149.45 µmol g-1 h-1, with an electron selectivity of 48.75% and an apparent quantum yield of 0.286%. Our work can serve as inspiration for developing photothermal catalysts for CO2 conversion into multi-carbon chemicals using solar energy.

A Biodegradable, Stretchable, Healable, and Self-Powered Optoelectronic Synapse Based on Ionic Gelatins for Neuromorphic Vision System

Optoelectronic synapses have gained increasing attentions as a fundamental building block in the development of neuromorphic visual systems. However, it remains a challenge to integrate multiple functions into a single optoelectronic synapse that can be widely applied in wearable artificial intelligence and implantable neuromorphic vision systems. In this study, a stretchable optoelectronic synapse based on biodegradable ionic gelatin heterojunction is successfully developed. This device exhibits self-powered synaptic plasticity behavior with broad spectral response and excellent elastic properties, yet it degrades rapidly upon disposal. After complete cleavage, the device can be fully repaired within 1 min, which is mainly attributed to the non-covalent interactions between different molecular chains. Moreover, the recovery and reprocessing of the ionic gelatins result in optoelectronic properties that are virtually indistinguishable from their original state, showcasing the resilience and durability of ionic gelatins. The combination of biodegradability, stretchability, self-healing, zero-power consumption, ease of large-scale preparation, and low cost makes the work a major step forward in the development of biodegradable and stretchable optoelectronic synapses.

Near-infrared-triggered plasmonic regulation and cardiomyocyte-based biosensing system for in vitro bradyarrhythmia treatment

Bradyarrhythmia, a life-threatening cardiovascular disease, is an increasing burden for the healthcare system. Currently, surgery, implanted device, and drug are introduced to treat the bradyarrhythmia in clinical practice. However, these conventional therapeutic strategies suffer from the invasive surgery, power supply, or drug side effect, respectively, hence developing the alternative therapeutic strategy is necessarily imperative. Here, a convenient and effective strategy to treat the bradyarrhythmia is proposed using near-infrared-triggered Au nanorod (NR) based plasmonic photothermal effect (PPE). Moreover, electrophysiology of cardiomyocytes is dynamically monitored by the integrated biosensing-regulating system during and after the treatment. Cardiomyocyte-based bradyarrhythmia recover rhythmic for a long time by regulating plasmonic photothermal effect. Furthermore, the regulatory mechanism is qualitatively investigated to verify the significant thermal stimulation in the recovery process. This study establishes a reliable platform for long-term recording and evaluation of mild photothermal therapy for bradyarrhythmia in vitro, offering an efficient and non-invasive strategy for the potential clinical applications.

Cost Effective Photothermal Materials Selection for Direct Solar-Driven Evaporation

The cornerstone of eco-friendly and affordable freshwater generation lies in harnessing solar energy for water evaporation. This process involves extracting vapor from liquid water using solar energy. Numerous innovative, low-cost materials have been proposed for this purpose. These materials aim to enable highly controllable and efficient conversion of solar energy into thermal energy while maintaining high cost-effectiveness. Here, in this review paper, we outline the advancements in solar-driven evaporation technology with a focus on optimizing synthesis methods and materials cost. It prioritizes refining evaporation efficiency and affordability using inventive manufacturing methods. By utilizing innovative reasonably priced materials, this process not only ensures efficient resource utilization but also fosters technological advancements in renewable energy applications. Moreover, the affordability of these materials makes solar-powered water evaporation accessible to a wider range of communities, empowering them to address water scarcity challenges.

Dual-plasmonic CuS@Au heterojunctions synergistic enhanced photothermal and colorimetric dual signal for sensitive multiplexed LFIA

Multiplexed immunodetection, which achieves qualitative and quantitative outcomes for multiple targets in a single-run process, provides more sufficient results to guarantee food safety. Especially, lateral flow immunoassay (LFIA), with the ability to offer multiple test lines for analytes and one control line for verification, is a forceful candidate in multiplexed immunodetection. Nevertheless, given that single-signal mode is incredibly vulnerable to interference, further efforts should be engrossed on the combination of multiplexed immunodetection and multiple signals. Photothermal signal has sparked significant excitement in designing immunosensors. In this work, by optimizing and comparing the amount of gold, CuS@Au heterojunctions (CuS@Au HJ) were synthesized. The dual-plasmonic metal-semiconductor hybrid heterojunction exhibits a synergistic photothermal performance by increasing light absorption and encouraging interfacial electron transfer. Meanwhile, the colorimetric property is synergistic enhanced, which is conducive to reduce the consumption of antibodies and then improve assay sensitivity. Therefore, CuS@Au HJ are suitable to be constructed in a dual signal and multiplexed LFIA (DSM-LFIA). T-2 toxin and deoxynivalenol (DON) were used as model targets for the simulated multiplex immunoassay. In contrast to colloidal gold-based immunoassay, the built-in sensor has increased sensitivity by ≈ 4.42 times (colorimetric mode) and ≈17.79 times (photothermal mode) for DON detection and by ≈ 1.75 times (colorimetric mode) and ≈13.09 times (photothermal mode) for T-2 detection. As a proof-of-concept application, this work provides a reference to the design of DSM-LFIA for food safety detection.

Harnessing the potential of hydrogels for advanced therapeutic applications: current achievements and future directions

The applications of hydrogels have expanded significantly due to their versatile, highly tunable properties and breakthroughs in biomaterial technologies. In this review, we cover the major achievements and the potential of hydrogels in therapeutic applications, focusing primarily on two areas: emerging cell-based therapies and promising non-cell therapeutic modalities. Within the context of cell therapy, we discuss the capacity of hydrogels to overcome the existing translational challenges faced by mainstream cell therapy paradigms, provide a detailed discussion on the advantages and principal design considerations of hydrogels for boosting the efficacy of cell therapy, as well as list specific examples of their applications in different disease scenarios. We then explore the potential of hydrogels in drug delivery, physical intervention therapies, and other non-cell therapeutic areas (e.g., bioadhesives, artificial tissues, and biosensors), emphasizing their utility beyond mere delivery vehicles. Additionally, we complement our discussion on the latest progress and challenges in the clinical application of hydrogels and outline future research directions, particularly in terms of integration with advanced biomanufacturing technologies. This review aims to present a comprehensive view and critical insights into the design and selection of hydrogels for both cell therapy and non-cell therapies, tailored to meet the therapeutic requirements of diverse diseases and situations.

Radical-Induced Photochromic Silver(I) Metal-Organic Frameworks: Alternative Topology, Dynamic Photoluminescence and Efficient Photothermal Conversion Modulated by Anionic Guests

Photogenerated radicals are an indispensable member of the state-of-the-art photochromic material family, as they can effectively modulate the photoluminescence and photothermal conversion performance of radical-induced photochromic complexes. Herein, two novel radical-induced photochromic metal-organic frameworks (MOFs), [Ag(TEPE)](AC) ⋅ 7/4H2O ⋅ 5/4EtOH (1) and [Ag(TEPE)](NC) ⋅ 3H2O ⋅ EtOH (2), are reported. Distinctly different topological networks can be obtained by judiciously introducing alternative π-conjugated anionic guests, including a new topological structure (named as sfm) first reported in this work, describing as 4,4,4,4-c net. EPR data and UV-Vis spectra prove the radical-induced photochromic mechanism. Dynamic photochromism exhibits tunability in a wide CIE color space, with a linear segment from yellow to red for 1, while a curved coordinate line for 2, resulting in colorful emission from blue to orange. Moreover, photogenerated TEPE* radicals effectively activate the near-infrared (NIR) photothermal conversion effect of MOFs. Under 1 W cm-2 808 nm laser irradiation, the surface temperatures of photoproducts 1* and 2* can reach ~160 °C and ~120 °C, respectively, with competitive NIR photothermal conversion efficiencies η=51.8 % (1*) and 36.2 % (2*). This work develops a feasible electrostatic compensation strategy to accurately introduce photoactive anionic guests into MOFs to construct multifunctional radical-induced photothermal conversion materials with tunable photoluminescence behavior.

Silver sulfide anchored bismuth molybdate p-n heterojunction nano-coating with excellent photo-thermal self-healing performance

In this research, a self-healing nano-coating with excellent photo-thermal response to near-infrared (NIR) laser is prepared. This coating incorporates silver sulfide anchored bismuth molybdate (Ag2S@Bi2MoO6) into a shape memory epoxy resin to achieve for a good photo-thermal conversion capability. The Ag2S@Bi2MoO6 p-n heterojunction could photo-generate more electron-holes pairs under the NIR laser irradiation. Also, it shows a wider absorption range of visible light, leading to effectively absorb the light energy, generate enough heat to induce the shape memory recovery in the coating, and seal the scratch. The results indicate that the temperature of EP-1 % Ag2S@Bi2MoO6 coating has reached about 88 °C, while good self-healing and anti-corrosion properties with a self-healing rate of 88.41 % have been achieved. Furthermore, calculations based on Density Functional Theory and Finite Element Method pointed out that the formation of p-n heterojunction effectively has enhanced the photo-thermal effect. This research opens a new way for developing self-healing coatings with an ultra-fast response time and high self-healing efficiency.

Photoelectric dual-mode triggered phase change materials for all-weather personal thermal management and shape memory

To cope with the demand of more complex and variable applications, it is urgent to develop dual-mode triggered, breathable, and shape-memory wearable heaters for all-weather personal thermal management of composite phase change materials (PCMs). Herein, after high-temperature carbonization of ZnCo-MOF (metal-organic framework) nanosheet array grown in situ on flexible and breathable carbon cloth (CC) and subsequent encapsulation of polyethylene glycol (PEG), the as-prepared PEG/CC@Co/CNT (carbon nanotube) composite PCMs exhibited good breathability, mechanical strength (tensile strength of 9.15 MPa), thermal energy storage density (114.19 J/g), and shape memory due to the synergy of flexible CC skeleton and rigid PEG. More importantly, composite PCMs possessed excellent solar-thermal (93.7 %, 100 mW/cm2) and electro-thermals (94.5 %, 2.0 V) conversion and storage capacity, benefiting from the conjugation effect of high graphitized carbon/carbon heterostructure with fast electron/photon/phonon transmission and the localized surface plasmon resonance effect of Co nanoparticles. Therefore, the integration of solar heating and Joule heating into breathable composite PCMs can be accurately used for next-generation all-weather, all-season, dual-mode triggered personal thermal management, including indoor/outdoor, daytime/night, rainy/cloudy and other complex and changeable scenarios.

Bithiophene-Functionalized Infrared Two-Photon Absorption Metal Complexes as Single-Molecule Platforms for Synergistic Photodynamic, Photothermal, and Chemotherapy

A planar conjugated ligand functionalized with bithiophene and its Ru(II), Os(II), and Ir(III) complexes have been constructed as single-molecule platform for synergistic photodynamic, photothermal, and chemotherapy. The complexes have significant two-photon absorption at 808 nm and remarkable singlet oxygen and superoxide anion production in aqueous solution and cells when exposed to 808 nm infrared irradiation. The most potent Ru(II) complex Ru7 enters tumor cells via the rare macropinocytosis, locates in both nuclei and mitochondria, and regulates DNA-related chemotherapeutic mechanisms intranuclearly including DNA topoisomerase and RNA polymerase inhibition and their synergistic effects with photoactivated apoptosis, ferroptosis and DNA cleavage. Ru7 exhibits high efficacy in vivo for malignant melanoma and cisplatin-resistant non-small cell lung cancer tumors, with a 100 % survival rate of mice, low toxicity to normal cells and low residual rate. Such an infrared two-photon activatable metal complex may contribute to a new generation of single-molecule-based integrated diagnosis and treatment platform to address drug resistance in clinical practice and phototherapy for large, deeply located solid tumors.

Efficient Charge Separation in Ag/PCN/UPDI Ternary Heterojunction for Optimized Photothermal-Photocatalytic Performance via Tandem Electric Fields

Charge separation driven by the internal electric field is a research hotspot in photocatalysis. However, it remains challenging to accurately control the electric field to continuously accelerate the charge transfer. Herein, a strategy of constructing a tandem electric field to continuously accelerate charge transfer in photocatalysts is proposed. The plasma electric field, interface electric field, and intramolecular electric field are integrated into the Ag/g-C3N4/urea perylene imide (Ag/PCN/UPDI) ternary heterojunction to achieve faster charge separation and longer carrier lifetime. The triple electric fields function as three accelerators on the charge transport path, promoting the separation of electron-hole pairs, accelerating charge transfer, enhancing light absorption, and increasing the concentration of energetic electrons on the catalyst. The H2 evolution rate of Ag/PCN/UPDI is 16.8 times higher than that of pristine PDI, while the degradation rate of oxytetracycline is increased by 4.5 times. This new strategy will provide a groundbreaking idea for the development of high-efficiency photocatalysts.

A H₂S-Evolving Alternately-Catalytic Enzyme Bio-Heterojunction with Antibacterial and Macrophage-Reprogramming Activity for All-Stage Infectious Wound Regeneration

The disorder of the macrophage phenotype and the hostile by-product of lactate evoked by pathogenic infection in hypoxic deep wound inevitably lead to the stagnant skin regeneration. In this study, hydrogen sulfide (H2S)-evolving alternately catalytic bio-heterojunction enzyme (AC-BioHJzyme) consisting of CuFe2S3 and lactate oxidase (LOD) named as CuFe2S3@LOD is developed. AC-BioHJzyme exhibits circular enzyme-mimetic antibacterial (EMA) activity and macrophage re-rousing capability, which can be activated by near-infrared-II (NIR-II) light. In this system, LOD exhausts lactate derived from bacterial anaerobic respiration and generated hydrogen peroxide (H2O2), which provides an abundant stock for the peroxidase-mimetic activity to convert the produced H2O2 into germicidal •OH. The GPx-mimetic activity endows AC-BioHJzyme with a glutathione consumption property to block the antioxidant systems in bacterial metabolism, while the O2 provided by the CAT-mimetic activity can generate 1O2 under the NIR-II irradiation. Synchronously, the H2S gas liberated from CuFe2S3@LOD under the infectious micromilieu allows the reduction of Fe(III)/Cu(II) to Fe(II)/Cu(І), resulting in sustained circular EMA activity. In vitro and in vivo assays indicate that the CuFe2S3@LOD AC-BioHJzyme significantly facilitates the infectious cutaneous regeneration by killing bacteria, facilitating epithelialization/collagen deposition, promoting angiogenesis, and reprogramming macrophages. This study provides a countermeasure for deep infectious wound healing via circular enzyme-mimetic antibiosis and macrophage re-rousing.

Double-Enhanced Photothermal Lateral Flow Biosensor Based on Dual Gold Nanoparticle Conjugates

Bacterial toxins emerge as the primary triggers of foodborne illnesses, posing a significant threat to human health. To ensure food safety, it is imperative to implement point-of-care testing methods. Lateral flow biosensors (LFBs) based on gold nanoparticles (GNPs) have been commonly used for rapid detection, but their applicationis limited by low sensitivity. Based on the localized surface plasmon resonance and photothermal effect of dual gold nanoparticle conjugates (DGNPs), we developed a smartphone-integrated photothermal LFB (PLFB) with double-enhanced colorimetric and photothermal sensitivity. Through numerical simulations, we verified that DGNPs have significantly enhanced photothermal performance compared to single 15 nm GNPs (SGNPs), and applied DGNPs in PLFB for the detection of staphylococcus enterotoxin A (SEA). The colorimetric and photothermal limits of detection of DGNPs-based PLFB for SEA were 0.091 and 0.0038 ng mL-1, respectively. Compared with the colorimetric detection of the SGNPs-based LFB, the colorimetric detection sensitivity of the DGNPs-based PLFB was increased by 10.7 times, and the photothermal detection sensitivity was further improved by 255.3 times. Moreover, the PLFB exhibits robust reproducibility and exceptional specificity and is applicable for detecting SEA in milk samples. This smartphone-integrated PLFB based on DGNPs allows users to detect toxins simply, conveniently, and quickly and has huge application potential in the field of food safety.

BODIPY directed one-dimensional self-assembly of gold nanorods

The assembly of anisotropic nanomaterials into ordered structures is challenging. Nevertheless, such self-assembled systems are known to have novel physicochemical properties and the presence of a chromophore within the nanoparticle ensemble can enhance the optical properties through plasmon-molecule electronic coupling. Here, we report the end-to-end assembly of gold nanorods into micrometer-long chains using a linear diamino BODIPY derivative. The preferential binding affinity of the amino group and the steric bulkiness of BODIPY directed the longitudinal assembly of gold nanorods. As a result of the linear assembly, the BODIPY chromophores positioned themselves in the plasmonic hotspots, which resulted in efficient plasmon-molecule coupling, thereby imparting photothermal properties to the assembled nanorods. This work thus demonstrates a new approach for the linear assembly of gold nanorods resulting in a plasmon-molecule coupled system, and the synergy between self-assembly and electronic coupling resulted in an efficient system having potential biomedical applications.

Recent progress in hydrogels combined with phototherapy for bacterial infection: A review

Phototherapy has become one of the most effective antibacterial methods due to its associated lack of drug resistance and its good antibacterial effect. For the purpose of avoiding the aggregation and premature release of photosensitive/photothermal agents during phototherapy, they can be mixed into three-dimensional hydrogels. The combination of hydrogels and phototherapy combines the merits of both hydrogels and phototherapy, overcomes the disadvantages of traditional antibacterial methodologies, and has broad application prospects. This review presents recent advancements in phototherapeutic antibacterial hydrogels including photodynamic antibacterial hydrogels, photothermal antibacterial hydrogels, photodynamic and photothermal synergistic antibacterial hydrogels, and other synergistic antibacterial hydrogels involving phototherapy.

Stable Radicals in Dihydrophenazine Derivatives-Doped Epoxy Resin for High Photothermal Conversion

Organic radicals exhibit great potential in photothermal applications, however, their innate high reactivity with oxygen renders the preparation of stable organic radicals highly challenging. In this work, a series of co-doped radical polymers ares prepared by doping dihydrophenazine derivatives (DPPs) into the epoxy resin matrix. DPPs can form radical species through the electron transfer process, which are further stabilized by the complex 3D network structure of epoxy resin. Experimental results show that the photothermal conversion efficiency is as high as 79.9%, and the temperature can quickly rise to ≈130 °C within 60 s. Due to the excellent visible light transmittance and mechanical properties of co-doped systems, this study further demonstrates their practical applications in energy-saving solar windows and thermoelectric power generation.

Nanomaterials for Photothermal Antimicrobial Surfaces

Microbial infection diseases are a major threat to human health and have become one of the main causes of mortality. The search for novel antimicrobial strategies is an important challenge for the scientific community, considering also the constant increase of antimicrobial resistance and the rise of new diseases. Among the new strategies to combat microbial infections, the photothermal effect seems to be one of the most promising. Hyperthermia is an effective and broad spectrum strategy for the removal of microbial infections. Among all of the strategies to reduce the diffusion of microbial infections, the preparation of antimicrobial surfaces seems of primary importance. In many cases, in fact, an infection can be diffused through surfaces just by touching them, or by inoculating microbes through an internalizable device, such as an implant, a prosthesis, or a catheter. In this review, we will summarize the recent advances in the preparation of photothermal antibacterial surfaces.

Prospect of Gold Nanoparticles in Pancreatic Cancer

Pancreatic cancer (PC) is characterized by its notably poor prognosis and high mortality rate, underscoring the critical need for advancements in its diagnosis and therapy. Gold nanoparticles (AuNPs), with their distinctive physicochemical characteristics, demonstrate significant application potential in cancer therapy. For example, upon exposure to lasers of certain wavelengths, they facilitate localized heating, rendering them extremely effective in photothermal therapy. Additionally, their extensive surface area enables the conjugation of therapeutic agents or targeting molecules, increasing the accuracy of drug delivery systems. Moreover, AuNPs can serve as radiosensitizers, enhancing the efficacy of radiotherapy by boosting the radiation absorption in tumor cells. Here, we systematically reviewed the application and future directions of AuNPs in the diagnosis and treatment of PC. Although AuNPs have advantages in improving diagnostic and therapeutic efficacy, as well as minimizing damage to normal tissues, concerns about their potential toxicity and safety need to be comprehensively evaluated.

Emerging 2D Nanomaterials-Integrated Hydrogels: Advancements in Designing Theragenerative Materials for Bone Regeneration and Disease Therapy

This review highlights recent advancements in the synthesis, processing, properties, and applications of 2D-material integrated hydrogels, with a focus on their performance in bone-related applications. Various synthesis methods and types of 2D nanomaterials, including graphene, graphene oxide, transition metal dichalcogenides, black phosphorus, and MXene are discussed, along with strategies for their incorporation into hydrogel matrices. These composite hydrogels exhibit tunable mechanical properties, high surface area, strong near-infrared (NIR) photon absorption and controlled release capabilities, making them suitable for a range of regeneration and therapeutic applications. In cancer therapy, 2D-material-based hydrogels show promise for photothermal and photodynamic therapies, and drug delivery (chemotherapy). The photothermal properties of these materials enable selective tumor ablation upon NIR irradiation, while their high drug-loading capacity facilitates targeted and controlled release of chemotherapeutic agents. Additionally, 2D-materials -infused hydrogels exhibit potent antibacterial activity, making them effective against multidrug-resistant infections and disruption of biofilm generated on implant surface. Moreover, their synergistic therapy approach combines multiple treatment modalities such as photothermal, chemo, and immunotherapy to enhance therapeutic outcomes. In bio-imaging, these materials serve as versatile contrast agents and imaging probes, enabling their real-time monitoring during tumor imaging. Furthermore, in bone regeneration, most 2D-materials incorporated hydrogels promote osteogenesis and tissue regeneration, offering potential solutions for bone defects repair. Overall, the integration of 2D materials into hydrogels presents a promising platform for developing multifunctional theragenerative biomaterials.

Photothermal and radiotherapy with alginate-coated gold nanoparticles for breast cancer treatment

Radiation therapy and phototherapy are commonly used cancer treatments that offer advantages such as a low risk of adverse effects and the ability to target cancer cells while sparing healthy tissue. A promising strategy for cancer treatment involves using nanoparticles (NPs) in combination with radiation and photothermal therapy to target cancer cells and improve treatment efficacy. The synthesis of gold NPs (AuNPs) for use in biomedical applications has traditionally involved toxic reducing agents. Here we harnessed dopamine (DA)-conjugated alginate (Alg) for the facile and green synthesis of Au NPs (Au@Alg-DA NPs). Alg-DA conjugate reduced Au ions, simultaneously stabilized the resulting AuNPs, and prevented aggregation, resulting in particles with a narrow size distribution and improved stability. Injectable Au@Alg-DA NPs significantly promoted ROS generation in 4T1 breast cancer cells when exposed to X-rays. In addition, their administration raised the temperature under a light excitation of 808 nm, thus helping to destroy cancer cells more effectively. Importantly, no substantial cytotoxicity was detected in our Au@Alg-DA NPs. Taken together, our work provides a promising route to obtain an injectable combined radio enhancer and photothermally active nanosystem for further potential clinic translation.

Modification of Polysulfide Surfaces with Low-Power Lasers

The modification of polymer surfaces using laser light is important for many applications in the nano-, bio- and chemical sciences. Such capabilities have supported advances in biomedical devices, electronics, information storage, microfluidics, and other applications. In most cases, these modifications require high power lasers that are expensive and require specialized equipment and facilities to minimize risk of hazardous radiation. Additionally, polymer systems that can be easily modified by lasers are often complex and costly to prepare. In this report, these challenges are addressed with the discovery of low-cost sulfur copolymers that can be rapidly modified with lasers emitting low-power infrared and visible light. The featured copolymers are made from elemental sulfur and either cyclopentadiene or dicyclopentadiene. Using a suite of lasers with discreet wavelengths (532, 638 and 786 nm) and powers, a variety of surface modifications could be made on the polymers such as controlled swelling or etching via ablation. The facile synthesis and laser modification of these polymer systems were exploited in applications such as direct laser lithography and erasable information storage.

Temperature-Controlled Selective Formation of Silver Nanoclusters and Their Transformation to the Same Product

Herein, two atomically precise silver nanoclusters, Ag54 and Ag33, directed by inner anion templates (CrO4 2- and/or Cl-), are initially isolated as a mixed phase from identical reactants across a wide temperature range (20-80 °C). Interestingly, fine-tuning the reaction temperature can realize pure phase synthesis of the two nanoclusters; that is, a metastable Ag54 is kinetically formed at a low temperature (20 °C), whereas such a system is steered towards a thermodynamically stable Ag33 at a relatively high temperature (80 °C). Electrospray ionization mass spectrometry illustrates that the stability of Ag33 is superior to that of Ag54, which is further supported by density functional theory calculations. Importantly, the difference in structural stability can influence the pathway of 1,4-bis(pyrid-4-yl)benzene induced transformation reaction starting from Ag54 and Ag33. The former undergoes a dramatic breakage-reorganization process to form an Ag31 dimer (Ag31), while the same product can be also achieved from the latter following a noninvasive ligand exchange process. Both the Ag54 and Ag33 have the potential for further remote laser ignition applications. This work not only demonstrates how temperature controls the isolation of a specific phase, but also sheds light on the structural transformation pathway of nanoclusters with different stability.

Activable Nano-Immunomodulator Assembled from π-Extended Naphthalenediimide for Precision Photothermal Immunotherapy

A nano-immunomodulator (R-NPT NP) comprising a tumor microenvironment (TME) activable resiquimod (R848) and a π-extended NIR-absorbing naphthophenanthrolinetetraone (NPT) has been engineered for spatiotemporal controlled photothermal immunotherapy. R-NPT NP demonstrated excellent photostability, while R848 promoted synergistic immunity as a toll-like receptor 7/8 (TLR7/8) agonist. Upon accumulation at the tumor site, R-NPT NP released R848 in response to redox metabolite glutathione (GSH), triggering dendritic cell (DC) activation. The photothermal effect endowed by R-NPT NP can ablate tumors directly and trigger immunogenic cell death to augment immunity after photoirradiation. The synergistic effect of GSH-liable TLR7/8 agonist and released immunogenic factors leads to a robust evocation of systematic immunity through promoted DC maturation and T cell infiltration. Thus, R-NPT NP with photoirradiation achieved 99.3 % and 98.2 % growth inhibition against primary and distal tumors, respectively.

Organizing Photosensitive and Photothermal Single-Sites Uniformly in a Trimetallic Metal-Organic Framework for Efficient Photocatalytic Hydrogen Evolution

Effective combination of the photosensitivity and photothermal property in photocatalyst is vital to achieve the maximum light utilization for superior photocatalytic efficiency. Herein, this work successfully organizes photosensitive Cd-NS single-sites and photothermal Ni-NS single-sites uniformly at a molecular level within a tailored trimetallic metal-organic framework. The optimized Ho6-Cd0.76Ni0.24-NS exhibits a superior photocatalytic hydrogen evolution rate of 40.06 mmol g-1 h-1 under visible-light irradiation and an apparent quantum efficiency of 29.37% at 420 nm without using cocatalysts or photosensitizers. A systematical mechanism study reveals that the uniformly organized photosensitive and photothermal single-sites have synergistic effect, which form ultrashort pathways for efficient transport of photoinduced electrons, suppress the recombination of photogenerated charge carriers, hence promote the hydrogen evolution activity. This work provides a promising approach for organizing dual-functional single-sites uniformly in photocatalyst for high-performance photocatalytic activity.

High-Entropy Photothermal Materials

High-entropy (HE) materials, celebrated for their extraordinary chemical and physical properties, have garnered increasing attention for their broad applications across diverse disciplines. The expansive compositional range of these materials allows for nuanced tuning of their properties and innovative structural designs. Recent advances have been centered on their versatile photothermal conversion capabilities, effective across the full solar spectrum (300-2500 nm). The HE effect, coupled with hysteresis diffusion, imparts these materials with desirable thermal and chemical stability. These attributes position HE materials as a revolutionary alternative to traditional photothermal materials, signifying a transformative shift in photothermal technology. This review delivers a comprehensive summary of the current state of knowledge regarding HE photothermal materials, emphasizing the intricate relationship between their compositions, structures, light-absorbing mechanisms, and optical properties. Furthermore, the review outlines the notable advances in HE photothermal materials, emphasizing their contributions to areas, such as solar water evaporation, personal thermal management, solar thermoelectric generation, catalysis, and biomedical applications. The review culminates in presenting a roadmap that outlines prospective directions for future research in this burgeoning field, and also outlines fruitful ways to develop advanced HE photothermal materials and to expand their promising applications.

Targeting starvation therapy for diabetic bacterial infections with endogenous enzyme-triggered hyaluronan-modified nanozymes in the infection microenvironment

The high-glycemic microenvironment of diabetic wounds promotes bacterial proliferation, leading to persistent infections and delayed wound healing. This poses a significant threat to human health, necessitating the development of new nanodrug visualization platforms. In this study, we designed and synthesized cascade nano-systems modified with targeted peptide and hyaluronic acid for diabetic infection therapy. The nano-systems were able to target the site of infection using LL-37, and in the microenvironment of wound infection, the hyaluronic acid shell of the nano-systems was degraded by endogenous hyaluronidase. This precise degradation released a cascade of nano-enzymes on the surface of the bacteria, effectively destroying their cytoskeleton. Additionally, the metals in the nano-enzymes provided a photo-thermal effect, accelerating wound healing. The cascade nano-visualization platform demonstrated excellent bactericidal efficacy in both in vitro antimicrobial assays and in vivo diabetic infection models. In conclusion, this nano-system employs multiple approaches including targeting, enzyme-catalyzed therapy, photothermal therapy, and chemodynamic therapy to kill bacteria and promote healing. The Ag@Pt-Au-LYZ/HA-LL-37 formulation shows great potential for the treatment of diabetic wounds.

Renal Clearable Nanodots-Engineered Erythrocytes with Enhanced Circulation and Tumor Accumulation for Photothermal Therapy of Hepatocellular Carcinoma

Living cell-mediated nanodelivery system is considered a promising candidate for targeted antitumor therapy; however, their use is restricted by the adverse interactions between carrier cells and nanocargos. Herein, a novel erythrocyte-based nanodelivery system is developed by assembling renal-clearable copper sulfide (CuS) nanodots on the outer membranes of erythrocytes via a lipid fusion approach, and demonstrate that it is an efficient photothermal platform against hepatocellular carcinoma. After intravenous injection of the nanodelivery system, CuS nanodots assembled on erythrocytes can be released from the system, accumulate in tumors in response to the high shear stress of bloodstream, and show excellent photothermal antitumor effect under the near infrared laser irradiation. Therefore, the erythrocyte-mediated nanodelivery system holds many advantages including prolonged blood circulation duration and enhanced tumor accumulation. Significantly, the elimination half-life of the nanodelivery system is 74.75 ± 8.77 h, which is much longer than that of nanodots (33.56 ± 2.36 h). Moreover, the other two kinds of nanodots can be well assembled onto erythrocytes to produce other erythrocyte-based hitchhiking platforms. Together, the findings promote not only the development of novel erythrocyte-based nanodelivery systems as potential platforms for tumor treatment but also their further clinical translation toward personalized healthcare.

Polyelectrolyte Hydrogel-Functionalized Photothermal Sponge Enables Simultaneously Continuous Solar Desalination and Electricity Generation Without Salt Accumulation

Technologies that can simultaneously generate electricity and desalinate seawater are highly attractive and required to meet the increasing global demand for power and clean water. Here, a bifunctional solar evaporator that features continuous electric generation in seawater without salt accumulation is developed by rational design of polyelectrolyte hydrogel-functionalized photothermal sponge. This evaporator not only exhibits an unprecedentedly high water evaporation rate of 3.53 kg m-2 h-1along with 98.6% solar energy conversion efficiency but can also uninterruptedly deliver a voltage output of 0.972 V and a current density of 172.38 µA cm-2 in high-concentration brine over a prolonged period under one sun irradiation. Many common electronic devices can be driven by simply connecting evaporator units in series or in parallel without any other auxiliaries. Different from the previously proposed power generation mechanism, this study reveals that the water-enabled proton concentration fields in intermediate water region can also induce an additional ion electric field in free water region containing solute, to further enhance electricity output. Given the low-cost materials, simple self-regeneration design, scalable fabrication processes, and stable performance, this work offers a promising strategy for addressing the shortages of clean water and sustainable electricity.

Passive Self-Sustained Thermoelectric Devices Powering the 24 h Wireless Transmission via Radiation-Cooling and Selective Photothermal Conversion

The rapid development of the Internet of Things has triggered a huge demand for self-sustained technology that can provide a continuous electricity supply for low-power electronics. Here, a self-sustained power supply solution is demonstrated that can produce a 24 h continuous and unipolar electricity output based on thermoelectric devices by harvesting the environmental temperature difference, which is ingeniously established utilizing radiation cooling and selective photothermal conversion. The developed prototype system can stably maintain a large temperature difference of about 1.8 K for a full day despite the real-time changes in environmental temperature and solar radiation, thereby driving continuous electricity output using the built-in thermoelectric device. Specifically, the large output voltage of >102 mV and the power density of >4.4 mW m-2 could be achieved for a full day, which are outstanding among the 24 h self-sustained thermoelectric devices and far higher than the start-up values of the wireless temperature sensor and also the light-emitting diode, enabling the 24 h remote data transmission and lighting, respectively. This work highlights the application prospects of self-sustained thermoelectric devices for low-power electronics.

Untethered Soft Pneumatic Actuators with Embedded Multiple Sensing Capabilities

Pneumatic soft robot attracts extensive attention because of its own characteristics. It has great application potential in medical and other fields. Although the recent improvement of the soft robot shows great potentials for delicate manipulations, the development of completely untethered pneumatic intelligent soft robots remains challenging. This article introduces a novel type of untethered soft pneumatic actuator with embedded multiple sensing capabilities. The untethered drive of the soft pneumatic actuator is achieved by near-infrared-induced liquid-gas phase transition. In addition, a soft conductive resin was developed to make flexible sensors. Embedded flexible sensors enable bending and temperature sensing of soft actuators. With Digital Light Processing three-dimensional printing, the rapid fabrication of soft actuators and flexible sensors was realized. This article demonstrates the potential of the proposed untethered soft actuators with embedded multiple sensing capabilities as an important contribution to the research of completely untethered intelligent soft robots.

Seeded Growth of Size-Tunable Au@Ag Core-Shell Nano-Octahedra and Their Yolk-Shell Derivatives for Near Infrared Photothermal Conversion

Gold-based nanostructures with well-defined morphologies and hollow interiors have significant potential as a versatile platform for various plasmonic applications including biomedical diagnostics and sensing. In this study, we report the synthesis of Au@Ag core-shell nanocrystals with perfect octahedral shapes and tunable edge lengths via seeded growth. These nanocrystals were then oxidatively carved into yolk-shell nanocages with a retained octahedral morphology. The increase in octahedral edge length and volume of the interior hollow cavity synergistically leads to a red-shift of the LSPR peak. As a result, the optimized Au@AuAg yolk-shell octahedral nanocages showed a remarkable temperature increase of 23 °C upon 15 min irradiation of an 808 nm laser at a power density of 1 W cm-2. This study provides a feasible strategy for creating octahedral AuAg nanostructures with tunable sizes and hollow interiors and validates their promising use in NIR photothermal conversion.

A universal strategy to enhance photothermal conversion efficiency by regulating the molecular aggregation states for safe photothermal therapy of bacterial infections

Photothermal therapy (PTT) has emerged as a promising approach for treating bacterial infections. However, achieving a high photothermal conversion efficiency (PCE) of photothermal agents (PTAs) remains a challenge. Such a problem is usually compensated by the use of a high-intensity laser, which inevitably causes tissue damage. Here, we present a universal strategy to enhance PCE by regulating the molecular aggregation states of PTAs within thermoresponsive nanogels. We demonstrate the effectiveness of this approach using aggregation-induced emission (AIE) and aggregation-caused quenching (ACQ) PTAs, showing significant enhancements in PCE without the need for intricate molecular modifications. Notably, the highest PCEs reach up to 80.9% and 64.4% for AIE-NG and ACQ-NG, respectively, which are nearly 2-fold of their self-aggregate counterparts. Moreover, we elucidate the mechanism underlying PCE enhancement, highlighting the role of strong intermolecular π-π interactions facilitated by nanogel-induced volume contraction. Furthermore, we validate the safety and efficacy of this strategy in in vitro and in vivo models of bacterial infections at safe laser power densities, demonstrating its potential for clinical translation. Our findings offer a straightforward, universal, and versatile method to improve PTT outcomes while minimizing cytotoxicity, paving the way for enhanced treatment of bacterial infections with safe PTT protocols.

Electron-electron scattering limits thermal conductivity of metals under extremely high electron temperatures

We report on the thermal transport properties of noble metals (gold, silver and copper) under conditions of extremely high electron temperatures (that are on the order of the Fermi energy). We perform parameter-free density functional theory calculations of the electron temperature-dependent electron-phonon coupling, electronic heat capacities, and thermal conductivities to elucidate the strong role played by the excitation of the low lyingd-bands on the transport properties of the noble metals. Our calculations show that, although the three metals have similar electronic band structures, the changes in their electron-phonon coupling at elevated electron temperatures are drastically different; while electron-phonon coupling decreases in gold, it increases in copper and, it remains relatively unperturbed for silver with increasing electron temperatures of up to ∼60 000 K (or 5 eV). We attribute this to the varying contributions from acoustic and longitudinal phonon modes to the electron-phonon coupling in the three metals. Although their electron-phonon coupling changes with electron temperature, the thermal conductivity trends with electron temperature are similar for all three metals. For instance, the thermal conductivities for all three metals reach their maximum values (on par with the room-temperature values of some of the most thermally conductive semiconductors) at electron temperatures of ∼6000 K, and thereafter monotonically decrease due to the enhanced effect of electron-electron scattering for electronic states that are further away from the Fermi energy. As such, only accounting for electron-phonon coupling and neglecting electron-electron scattering can lead to large over-predictions of the thermal conductivities at extremely high electron temperatures. Our results shed light on the microscopic understanding of the electronic scattering mechanisms and thermal transport in noble metals under conditions of extremely high electron temperatures and, as such, are significant for a plethora of applications such as in plasmonic devices that routinely leverage hot electron transport.

Determination of Photothermal and EMI Shielding Efficiency of Graphene-Silver Nanoparticle Composites Prepared under Low-Dose Gamma Irradiation

Silver nanoparticles (Ag NPs) have been produced by low-dose (1-20 kGy) gamma irradiation of silver nitrate in the presence of graphene-based material (graphene oxide or electrochemically exfoliated graphene). The large surface area of those graphene-based materials combined with the presence of oxygen-containing functional groups on the surface provided successful nucleation and growth of Ag nanoparticles, which resulted in a uniformly covered graphene surface. The obtained Ag nanoparticles were spherical with a predominant size distribution of 10-50 nm for graphene oxide and 10-100 nm for electrochemically exfoliated graphene. The photothermal efficiency measurement showed a temperature increase upon exposure to a 532 nm laser for all samples and the highest photothermal efficiency was measured for the graphene oxide/Ag NP sample prepared at 5 kGy. Electromagnetic interference (EMI) shielding efficiency measurements showed poor shielding for the composites prepared with graphene oxide. On the other hand, all composites prepared with electrochemically exfoliated graphene showed EMI shielding to some extent, and the best performance was measured for the samples prepared at 5 and 20 kGy doses.

Magnetic Iron Oxide Nanoparticles Coated by Coumarin-Bound Copolymer for Enhanced Magneto- and Photothermal Heating and Luminescent Thermometry

In this work, we report on the synthesis and investigation of new hybrid multifunctional iron oxide nanoparticles (IONPs) coated by coumarin-bound copolymer, which combine magneto- or photothermal heating with luminescent thermometry. A series of amphiphilic block copolymers, including Coum-C11-PPhOx27-PMOx59 and Coum-C11-PButOx8-PMOx42 bearing luminescent and photodimerizable coumarin moiety, as well as coumarin-free PPhOx27-PMOx57, were evaluated for their utility as luminescent thermometers and for encapsulating spherical 26 nm IONPs. The obtained IONP@Coum-C11-PPhOx27-PMOx59 nano-objects are perfectly dispersible in water and able to provide macroscopic heating remotely triggered by an alternating current magnetic field (AMF) with a specific absorption rate (SAR) value of 240 W.g-1 or laser irradiation with a photothermal conversion efficiency of η = 68%. On the other hand, they exhibit temperature-dependent emission of coumarin offering the function of luminescent thermometer, which operates in the visible region between 20 °C and 60 °C in water displaying a maximal relative thermal sensitivity (Sr) of 1.53%·°C-1 at 60 °C.

Yolk-shelled silver nanowire@amorphous metal-organic framework for controlled drug delivery and light-promoting infected wound healing

Bacteria-infected wounds healing has been greatly hindered by antibiotic resistance and persistent inflammation. It is crucial to develop multifunctional nanocomposites that possess effective antibacterial properties and can simultaneously accelerate the wound healing process to overcome the above challenges. Herein, we prepared a yolk-shell structured Ag nanowires (NWs)@amorphous hollow ZIF-67 by etching ZIF-67 onto the Ag NWs for infected wound healing for the first time. The etched hollow structure of amorphous ZIF-67 in the nanocomposite makes it a promising platform for loading healing-promoting drugs. We extensively studied the antibacterial and healing-promoting properties of the curcumin (CCM)-loaded nanocomposite (Ag NWs@C-HZ67). Ag NWs, being noble metal materials with plasmonic effects, can absorb a broad range of natural light and convert it to thermal energy. This photothermal conversion further improves the release of antibacterial components and wound healing drugs when exposed to light. During the healing process of an infected wound, Ag and Co ions were released from Ag NWs@C-HZ67 upon direct contact with the wound exudate and under the influence of light irradiation. Simultaneously, the loaded CCM leaked out to repair the infected wound. The minimum inhibitory concentrations of the Ag NWs@C-HZ67 groups against Escherichia coli and Staphylococcus aureus bacteria decreased to 3 and 3 μg ml-1 when exposed to white light. Furthermore, an in vivo assessment of infected wound healing demonstrated that combining Ag NWs@C-HZ67 with light significantly accelerated the wound healing process, achieving 70% healing by the 6th day and almost complete healing by the 8th day. This advanced nanocomposite, consisting of components that possess antibacterial and growth-promoting properties, offers a safe, effective and clinically-translatable solution for accelerating the healing process of infected wounds.

A Uni-Micelle Approach for the Controlled Synthesis of Monodisperse Gold Nanocrystals

Small-size gold nanoparticles (AuNPs) are showing large potential in various fields, such as photothermal conversion, sensing, and medicine. However, current synthesis methods generally yield lower, resulting in a high cost. Here, we report a novel uni-micelle method for the controlled synthesis of monodisperse gold nanocrystals, in which there is only one kind micelle containing aqueous solution of reductant while the dual soluble Au (III) precursor is dissolved in oil phase. Our synthesis includes the reversible phase transfer of Au (III) and "uni-micelle" synthesis, employing a Au (III)-OA complex as an oil-soluble precursor. Size-controlled monodisperse AuNPs with a size of 4-11 nm are synthesized by tuning the size of the micelles, in which oleylamine (OA) is adsorbed on the shell of micelles and enhances the rigidity of the micelles, depressing micellar coalescence. Monodisperse AuNPs can be obtained through a one-time separation process with a higher yield of 61%. This method also offers a promising way for the controlled synthesis of small-size alloy nanoparticles and semiconductor heterojunction quantum dots.

Advances in Nanomaterials for Immunotherapeutic Improvement of Cancer Chemotherapy

Immuno-stimulative effect of chemotherapy (ISECT) is recognized as a potential alternative to conventional immunotherapies, however, the clinical application is constrained by its inefficiency. Metronomic chemotherapy, though designed to overcome these limitations, offers inconsistent results, with effectiveness varying based on cancer types, stages, and patient-specific factors. In parallel, a wealth of preclinical nanomaterials holds considerable promise for ISECT improvement by modulating the cancer-immunity cycle. In the area of biomedical nanomaterials, current literature reviews mainly concentrate on a specific category of nanomaterials and nanotechnological perspectives, while two essential issues are still lacking, i.e., a comprehensive analysis addressing the causes for ISECT inefficiency and a thorough summary elaborating the nanomaterials for ISECT improvement. This review thus aims to fill these gaps and catalyze further development in this field. For the first time, this review comprehensively discusses the causes of ISECT inefficiency. It then meticulously categorizes six types of nanomaterials for improving ISECT. Subsequently, practical strategies are further proposed for addressing inefficient ISECT, along with a detailed discussion on exemplary nanomedicines. Finally, this review provides insights into the challenges and perspectives for improving chemo-immunotherapy by innovations in nanomaterials.

Synthesis of Photoresponsive Fast Self-healing Polyolefin Composites by Nickel-Catalyzed Copolymerization of Ethylene and Lignin Cluster Monomers

Polymers may suffer from sudden mechanical damages during long-term use under various harsh operating environments. Rapid and real-time self-healing will extend their service life, which is particularly attractive in the context of circular economy. In this work, a lignin cluster polymerization strategy (LCPS) was designed to prepare a series of lignin functionalized polyolefin composites with excellent mechanical properties through nickel catalyzed copolymerization of ethylene and lignin cluster monomers. These composites can achieve rapid self-healing within 30 seconds under a variety of extreme usage environments (underwater, seawater, extremely low temperatures as low as -60 °C, organic solvents, acid/alkali solvents, etc.), which is of great significance for real-time self-healing of sudden mechanical damage. More importantly, the dynamic cross-linking network within these composites enable great re-processability and amazing sealing performances.

Polyoxometalate-based plasmonic electron sponge membrane for nanofluidic osmotic energy conversion

Nanofluidic membranes have demonstrated great potential in harvesting osmotic energy. However, the output power densities are usually hampered by insufficient membrane permselectivity. Herein, we design a polyoxometalates (POMs)-based nanofluidic plasmonic electron sponge membrane (PESM) for highly efficient osmotic energy conversion. Under light irradiation, hot electrons are generated on Au NPs surface and then transferred and stored in POMs electron sponges, while hot holes are consumed by water. The stored hot electrons in POMs increase the charge density and hydrophilicity of PESM, resulting in significantly improved permselectivity for high-performance osmotic energy conversion. In addition, the unique ionic current rectification (ICR) property of the prepared nanofluidic PESM inhibits ion concentration polarization effectively, which could further improve its permselectivity. Under light with 500-fold NaCl gradient, the maximum output power density of the prepared PESM reaches 70.4 W m-2, which is further enhanced even to 102.1 W m-2 by changing the ligand to P5W30. This work highlights the crucial roles of plasmonic electron sponge for tailoring the surface charge, modulating ion transport dynamics, and improving the performance of nanofluidic osmotic energy conversion.

Two structurally new Lindqvist hexaniobate-templated silver thiolate clusters

Two structurally new Lindqvist hexaniobate-templated silver thiolate clusters, [Nb6O19@Ag45(iPrS)23(CH3COO)14] (Ag45) and (H3O)4[Nb6O19@Ag41KS2.5O2(H2O)7.5(iPrS)24(CH3COO)5] (Ag41), were synthesized using a facile one-pot solvothermal approach. Single crystal X-ray diffraction analyses revealed the presence of a classical Lindqvist-type [Nb6O19]8- anion template, with iPrS- and CH3COO- surface-protecting ligands in both silver clusters, which can further form two-dimensional Ag45 assembly and one-dimensional Ag41 chain packing structures. Both Ag45 and Ag41 clusters exhibited intriguing photothermal conversion properties and temperature-dependent emission behavior.