Reactions and Polymerizations at the Liquid–Liquid Interface

Revealing the Existence of Long-Range Liquid-Liquid Interfacial Potential in Phase-Transfer Processes

By employing fluorescence wide-field microscopy and a nanoparticle-based phase transfer catalyst (PTC), consisting of a fluorescent silica nanoparticle functionalized with trioctylpropylammonium bromide, we demonstrate that in the presence of NaOH, single nanoparticles display subdiffusive motion along the axis normal to an aqueous liquid-organic liquid interface. This is because of an extended interfacial potential with a shallow well (∼1 kBT) that stretches a few μm into the organic phase, in contrast to previous molecular dynamics studies that reported narrow interfaces on the order of ∼1 nm. Spontaneous interfacial emulsification induced by NaOH results in the propagation of water-in-oil nanoemulsions into the organic solvent that creates an equilibrium hybrid-solvent composition that solvates the PTC. A greater mobility and longer residence time of the PTC at the potential well enhance the interfacial phase transfer process and catalytic efficiency.

Localized Surface Plasmon Resonance Sensing and its Interplay with Fluidics

In this Feature Article, we discuss the interplay between fluidics and the localized surface plasmon resonance (LSPR) sensing technique, primarily focusing on its applications in the realm of bio/chemical sensing within fluidic environments. Commencing with a foundational overview of LSPR principles from a sensing perspective, we subsequently showcase the development of a streamlined LSPR chip integrated with microfluidic structures. This integration opens the doors to advanced experiments involving fluid dynamics, greatly expanding the scope of LSPR-based research. Our discussions then turn to the practical implementation of LSPR and microfluidics in real-time biosensing, with a specific emphasis on monitoring DNA polymerase activity. Additionally, we illustrate the direct sensing of biological fluids, exemplified by the analysis of urine, while also shedding light on a unique particle assembly process that occurs on LSPR chips. We not only discuss the significance of LSPR sensing but also explore its potential to investigate a plethora of phenomena at liquid-liquid and solid-liquid interfaces. This is particularly noteworthy, as existing transduction methods and sensors fall short in fully comprehending these interfacial phenomena. Concluding our discussion, we present a futuristic perspective that provides insights into potential opportunities emerging at the intersection of fluidics and LSPR sensing.

Complex Droplet Microreactor for Highly Efficient and Controllable Esterification and Cascade Reactions

A highly efficient complex emulsion microreactor has been successfully developed for multiphasic water-labile reactions, providing a powerful platform for atom economy and spatiotemporal control of reaction kinetics. Complex emulsions, composing a hydrocarbon phase (H) and a fluorocarbon phase (F) dispersed in an aqueous phase (W), are fabricated in batch scale with precisely controlled droplet morphologies. A biphasic esterification reaction between 2-bromo-1,2-diphenylethane-1-ol (BPO) and perfluoro-heptanoic acid (PFHA) is chosen as a reversible and water-labile reaction model. The conversion reaches up to 100 % under mild temperature without agitation, even with nearly equivalent amounts of reactants. This efficiency surpasses all reported single emulsion microreactors, i. e., 84~95 %, stabilized by various emulsifiers with different catalysts, which typically necessitate continuous stirring, a high excess of one reactant, and/or extended reaction time. Furthermore, over 3 times regulation threshold in conversion rate is attained by manipulating the droplet morphologies, including size and topology, e. g., transition from completely engulfed F/H/W double to partially engulfed (F+H)/W Janus. Addition-esterification, serving as a model for triple phasic cascade reaction, is also successfully implemented under agitating-free and mild temperature with controlled reaction kinetics, demonstrating the versatility and effectiveness of the complex emulsion microreactor.

Advances in Mn-Based MOFs and Their Derivatives for High-Performance Supercapacitor

As the most widely used metal material in supercapacitors, manganese (Mn)-based materials possess the merits of high theoretical capacitance, stable structure as well as environmental friendliness. However, due to poor conductivity and easy accumulation, the practical capacitance of Mn-based materials is far lower than that of theoretical value. Therefore, accurate structural adjustment and controllable strategies are urgently needed to optimize the electrochemical properties of Mn-based materials. Metal-organic frameworks (MOFs) are porous materials with high specific surface area (SSA), tunable pore size, and controllable structure. These features make them attractive as precursors or scaffold for the synthesis of metal-based materials and composites, which are important for electrochemical energy storage applications. Therefore, a timely and comprehensive review on the classification, design, preparation and application of Mn-based MOFs and their derivatives for supercapacitors has been given in this paper. The recent advancement of Mn-based MOFs and their derivatives applied in supercapacitor electrodes are particularly highlighted. Finally, the challenges faced by Mn-MOFs and their derivatives for supercapacitors are summarized, and strategies to further improve their performance are proposed. The aspiration is that this review will serve as a beneficial compass, guiding the logical creation of Mn-based MOFs and their derivatives in the future.

Pickering emulsion biocatalysis: Bridging interfacial design with enzymatic reactions

Non-homogeneous enzyme-catalyzed systems are more widely used than homogeneous systems. Distinguished from the conventional biphasic approach, Pickering emulsion stabilized by ultrafine solid particles opens up an innovative platform for biocatalysis. Their vast specific surface area significantly enhances enzyme-substrate interactions, dramatically increasing catalytic efficiency. This review comprehensively explores various aspects of Pickering emulsion biocatalysis, provides insights into the multiple types and mechanisms of its catalysis, and offers strategies for material design, enzyme immobilization, emulsion formation control, and reactor design. Characterization methods are summarized for the determination of drop size, emulsion type, interface morphology, and emulsion potential. Furthermore, recent reports on the design of stimuli-responsive reaction systems are reviewed, enabling the simple control of demulsification. Moreover, the review explores applications of Pickering emulsion in single-step, cascade, and continuous flow reactions and outlines the challenges and future directions for the field. Overall, we provide a review focusing on Pickering emulsions catalysis, which can draw the attention of researchers in the field of catalytic system design, further empowering next-generation bioprocessing.

Spatial organization and functions of Chk1 activation by TopBP1 biomolecular condensates

Assembly of TopBP1 biomolecular condensates triggers activation of the ataxia telangiectasia-mutated and Rad3-related (ATR)/Chk1 signaling pathway, which coordinates cell responses to impaired DNA replication. Here, we used optogenetics and reverse genetics to investigate the role of sequence-specific motifs in the formation and functions of TopBP1 condensates. We propose that BACH1/FANCJ is involved in the partitioning of BRCA1 within TopBP1 compartments. We show that Chk1 is activated at the interface of TopBP1 condensates and provide evidence that these structures arise at sites of DNA damage and in primary human fibroblasts. Chk1 phosphorylation depends on the integrity of a conserved arginine motif within TopBP1's ATR activation domain (AAD). Its mutation uncouples Chk1 activation from TopBP1 condensation, revealing that optogenetically induced Chk1 phosphorylation triggers cell cycle checkpoints and slows down replication forks in the absence of DNA damage. Together with previous work, these data suggest that the intrinsically disordered AAD encodes distinct molecular steps in the ATR/Chk1 pathway.

A solid beta-sheet structure is formed at the surface of FUS droplets during aging

Phase transitions are important to understand cell dynamics, and the maturation of liquid droplets is relevant to neurodegenerative disorders. We combined NMR and Raman spectroscopies with microscopy to follow, over a period of days to months, droplet maturation of the protein fused in sarcoma (FUS). Our study reveals that the surface of the droplets plays a critical role in this process, while RNA binding prevents it. The maturation kinetics are faster in an agarose-stabilized biphasic sample compared with a monophasic condensed sample, owing to the larger surface-to-volume ratio. In addition, Raman spectroscopy reports structural differences upon maturation between the inside and the surface of droplets, which is comprised of β-sheet content, as revealed by solid-state NMR. In agreement with these observations, a solid crust-like shell is observed at the surface using microaspiration. Ultimately, matured droplets were converted into fibrils involving the prion-like domain as well as the first RGG motif.

Bioinspired 2D nanofluidic membranes for energy applications

Bioinspired two-dimensional (2D) nanofluidic membranes have been explored for the creation of high-performance ion transport systems that can mimic the delicate transport functions of living organisms. Advanced energy devices made from these membranes show excellent energy storage and conversion capabilities. Further research and development in this area are essential to unlock the full potential of energy devices and facilitate the development of high-performance equipment toward real-world applications and a sustainable future. However, there has been minimal review and summarization of 2D nanofluidic membranes in recent years. Thus, it is necessary to carry out an extensive review to provide a survey library for researchers in related fields. In this review, the classification and the raw materials that are used to construct 2D nanofluidic membranes are first presented. Second, the top-down and bottom-up methods for constructing 2D membranes are introduced. Next, the applications of bioinspired 2D membranes in osmotic energy, hydraulic energy, mechanical energy, photoelectric conversion, lithium batteries, and flow batteries are discussed in detail. Finally, the opportunities and challenges that 2D nanofluidic membranes are likely to face in the future are envisioned. This review aims to provide a broad knowledge base for constructing high-performance bioinspired 2D nanofluidic membranes for advanced energy applications.

Enhanced Biphasic Reactions in Amphiphilic Silica Mesopores

In this study, we investigated the effect of the pore volume and mesopore size of surface-active catalytic organosilicas on the genesis of particle-stabilized (Pickering) emulsions for the dodecanal/ethylene glycol system and their reactivity for the acid-catalyzed biphasic acetalization reaction. To this aim, we functionalized a series of fumed silica superparticles (size 100-300 nm) displaying an average mesopore size in the range of 11-14 nm and variable mesopore volume, with a similar surface density of octyl and propylsulfonic acid groups. The modified silica superparticles were characterized in detail using different techniques, including acid-base titration, thermogravimetric analysis, TEM, and dynamic light scattering. The pore volume of the particles impacts their self-assembly and coverage at the dodecanal/ethylene glycol (DA/EG) interface. This affects the stability and the average droplet size of emulsions and conditions of the available interfacial surface area for reaction. The maximum DA-EG productivity is observed for A200 super-SiNPs with a pore volume of 0.39 cm3·g-1 with an interfacial coverage by particles lower than 1 (i.e., submonolayer). Using dissipative particle dynamics and all-atom grand canonical Monte Carlo simulations, we unveil a stabilizing role of the pore volume of porous silica superparticles for generating emulsions and local micromixing of immiscible dodecanal and ethylene glycol, allowing fast and efficient solvent-free acetalization in the presence of Pickering emulsions. The micromixing level is interrelated to the adsorption energy of self-assembled particles at the DA/EG interface.

Signal-noise metrics for RNA binding protein identification reveal broad spectrum protein-RNA interaction frequencies and dynamics

Recent efforts towards the comprehensive identification of RNA-bound proteomes have revealed a large, surprisingly diverse family of candidate RNA-binding proteins (RBPs). Quantitative metrics for characterization and validation of protein-RNA interactions and their dynamic interactions have, however, proven analytically challenging and prone to error. Here we report a method termed LEAP-RBP (Liquid-Emulsion-Assisted-Purification of RNA-Bound Protein) for the selective, quantitative recovery of UV-crosslinked RNA-protein complexes. By virtue of its high specificity and yield, LEAP-RBP distinguishes RNA-bound and RNA-free protein levels and reveals common sources of experimental noise in RNA-centric RBP enrichment methods. We introduce strategies for accurate RBP identification and signal-based metrics for quantifying protein-RNA complex enrichment, relative RNA occupancy, and method specificity. In this work, the utility of our approach is validated by comprehensive identification of RBPs whose association with mRNA is modulated in response to global mRNA translation state changes and through in-depth benchmark comparisons with current methodologies.

Stabilizing Liquids Using Interfacial Supramolecular Assemblies

Stabilizing liquids based on supramolecular assembly (non-covalent intermolecular interactions) has attracted significant interest, due to the increasing demand for soft, liquid-based devices where the shape of the liquid is far from the equilibrium spherical shape. The components comprising these interfacial assemblies must have sufficient binding energies to the interface to prevent their ejection from the interface when the assemblies are compressed. Here, we highlight recent advances in structuring liquids based on non-covalent intermolecular interactions. We describe some of the progress made that reveals structure-property relationships. In addition to treating advances, we discuss some of the limitations and provide a perspective on future directions to inspire further studies on structured liquids based on supramolecular assembly.

Nanocarriers with Multiple Cargo Load-A Comprehensive Preparation Guideline Using Orthogonal Strategies

Multifunctional nanocarriers enhance the treatment efficacy for modern therapeutics and have gained increasing importance in biomedical research. Codelivery of multiple bioactive molecules enables synergistic therapies. Coencapsulation of cargo molecules into one nanocarrier system is challenging due to different physicochemical properties of the cargo molecules. Additionally, coencapsulation of multiple molecules simultaneously shall proceed with high control and efficiency. Orthogonal approaches for the preparation of nanocarriers are essential to encapsulate sensitive bioactive molecules while preserving their bioactivity. Preparation of nanocarriers by physical processes (i.e., self-assembly or coacervation) and chemical reactions (i.e., click reactions, polymerizations, etc.) are considered as orthogonal methods to most cargo molecules. This review shall act as a guideline to allow the reader to select a suitable preparation protocol for a desired nanocarrier system. This article helps to select for combinations of cargo molecules (hydrophilic-hydrophobic, small-macro, organic-inorganic) with nanocarrier material and synthesis protocols. The focus of this article lies on the coencapsulation of multiple cargo molecules into biocompatible and biodegradable nanocarriers prepared by orthogonal strategies. With this toolbox, the selection of a preparation method for a known set of cargo molecules to prepare the desired biodegradable and loaded nanocarrier shall be provided.

Biobased Agents for Single-Particle Detection with Optoacoustics

Optoacoustic (OA, photoacoustic) imaging synergistically combines rich optical contrast with the resolution of ultrasound within light-scattering biological tissues. Contrast agents have become essential to boost deep-tissue OA sensitivity and fully exploit the capabilities of state-of-the-art OA imaging systems, thus facilitating the clinical translation of this modality. Inorganic particles with sizes of several microns can also be individually localized and tracked, thus enabling new applications in drug delivery, microrobotics, or super-resolution imaging. However, significant concerns have been raised regarding the low bio-degradability and potential toxic effects of inorganic particles. Bio-based, biodegradable nano- and microcapsules consisting of an aqueous core with clinically-approved indocyanine green (ICG) and a cross-linked casein shell obtained in an inverse emulsion approach are introduced. The feasibility to provide contrast-enhanced in vivo OA imaging with nanocapsules as well as localizing and tracking individual larger microcapsules of 4-5 µm is demonstrated. All components of the developed capsules are safe for human use and the inverse emulsion approach is known to be compatible with a variety of shell materials and payloads. Hence, the enhanced OA imaging performance can be exploited in multiple biomedical studies and can open a route to clinical approval of agents detectable at a single-particle level.

Pushing Photochemistry into Water: Acceleration of the Di-π-Methane Rearrangement and the Paternó-Büchi Reaction "On-Water"

Two representative organic photoreactions, namely a bimolecular photocycloaddition and a monomolecular photorearrangement, are presented that are accelerated when the reaction is performed "on-water", that is, at the water-substrate interface with no solvation of the reaction components. According to the established models of ground-state reactions "on-water", the enhanced efficiency of the photoreactions is explained by hydrophobic effects (Paternó-Büchi reaction) or specific hydrogen bonding (di-π-methane rearrangement) at the water-substrate interface that decrease the energy of the respective transition state. These results point to the potential of this approach to conduct photoreactions more efficiently in an ecologically favorable medium.

Boosting Catalytic Selectivity through a Precise Spatial Control of Catalysts at Pickering Droplet Interfaces

Exploration of new methodologies to tune catalytic selectivity is a long-sought goal in catalytic community. In this work, oil-water interfaces of Pickering emulsions are developed to effectively regulate catalytic selectivity of hydrogenation reactions, which was achieved via a precise control of the spatial distribution of metal nanoparticles at the droplet interfaces. It was found that Pd nanoparticles located in the inner interfacial layer of Pickering droplets exhibited a significantly enhanced selectivity for p-chloroaniline (up to 99.6%) in the hydrogenation of p-chloronitrobenzene in comparison to those in the outer interfacial layer (63.6%) in pure water (68.5%) or in pure organic solvents (46.8%). Experimental and theoretical investigations indicated that such a remarkable interfacial microregion-dependent catalytic selectivity was attributed to the microenvironments of the coexistence of water and organic solvent at the droplet interfaces, which could provide unique interfacial hydrogen-bonding interactions and solvation effects so as to alter the adsorption patterns of p-chloronitrobenzene and p-chloroaniline on the Pd nanoparticles, thereby avoiding the unwanted contact of C-Cl bonds with the metal surfaces. Our strategy of precise spatial control of catalysts at liquid-liquid interfaces and the unprecedented interfacial effect reported here not only provide new insights into the liquid-liquid interfacial reactions but also open an avenue to boost catalytic selectivity.

Nanocapsules: An Emerging Drug Delivery System

BACKGROUND

Controlled drug release and site-specific delivery of drugs make nanocapsules the most approbative drug delivery system for various kinds of drugs, bioactive, protein, and peptide compounds. Nanocapsules (NCs) are spherical shape microscopic shells consisting of a core (solid or liquid) in which the drug is positioned in a cavity enclosed by a distinctive polymeric membrane.

OBJECTIVES

The main objective of the present patent study is to elaborate on various formulation techniques and methods of nanocapsules (NCs). The review also spotlights various biomedical applications as well as on the patents of NCs to date.

METHODS

The review was extracted from the searches performed using various search engines such as PubMed, Google Patents, Medline, Google Scholars, etc. In order to emphasize the importance of NCs, some published patents of NCs have also been reported in the review.

RESULTS

NCs are tiny magical shells having incredible reproducibility. Various techniques can be used to formulate NCs. The pharmaceutical performance of the formulated NCs can be judged by evaluating their shape, size, entrapment efficiency, loading capacity, etc., using different analytical techniques. Their main applications are found in the field of agrochemicals, genetic manipulation, cosmetics, hygiene items, strategic distribution of drugs to tumors, nanocapsule bandages to combat infection, and radiotherapy.

CONCLUSION

In the present review, our team made a deliberate effort to summarize the recent advances in the field of NCs and focus on new patents related to the implementation of NCs delivery systems in the area of some life-threatening disorders like diabetes, cancer, and cardiovascular diseases.

Lipase-Entrapped Colloidosomes with Tunable Positioning at the Oil-Water Interface for Pickering Emulsion-Enhanced Biocatalysis

Pickering interfacial biocatalysis (PIB) paves the way for efficient enzymatic catalysis in the biphasic system. However, the Pickering interfacial biocatalysts located on the oil-water interface still face the inevitable deactivation when one of the phases contains the reactant that inactivates the enzyme. Herein, the positioning of lipase-entrapped colloidosomes (LECs) at the emulsion interface is rationally designed by physically tuning the wettability, which allows LECs to protrude into the selected phase to protect the lipase away from the damage of the reactant. As a proof of concept, LECs with different positioning at the interface are used as Pickering interfacial biocatalysts to produce biodiesel by esterification of lauric acid and methanol. Impressively, the LECs that protrude into the oil phase possess an optimal catalytic performance to protect more lipases away from the damage of the reactant of short-chain alcohol, which shows an 8.18-fold enhancement in specific activity relative to the free lipase, reach a biodiesel yield of 80.37% after 8 h, and retain the 96.44% of relative activity after 10 cycles. This study provides a novel and robust platform for Pickering emulsion-enhanced biocatalysis.

Liquid Heterostructures: Generation of Liquid-Liquid Interfaces in Free-Flowing Liquid Sheets

Chemical reactions and biological processes are frequently governed by the structure and dynamics of the interface between two liquid phases, but these interfaces are often difficult to study due to the relative abundance of the bulk liquids. Here, we demonstrate a method for generating multilayer thin film stacks of liquids, which we call liquid heterostructures. These free-flowing layered liquid sheets are produced with a microfluidic nozzle that impinges two converging jets of one liquid onto opposite sides of a third jet of another liquid. The resulting sheet consists of two layers of the first liquid enveloping an inner layer of the second liquid. Infrared microscopy, white light reflectivity, and imaging ellipsometry measurements demonstrate that the buried liquid layer has a tunable thickness and displays well-defined liquid-liquid interfaces and that this inner layer can be only tens of nanometers thick. The demonstrated multilayer liquid sheets minimize the amount of bulk liquid relative to their buried interfaces, which makes them ideal targets for spectroscopy and scattering experiments.

Lipase Catalyzed Transesterification of Model Long-Chain Molecules in Double-Shell Cellulose-Coated Oil-in-Water Emulsion Particles as Microbioreactors

Lipase-catalyzed transesterification is prevalent in industrial production and is an effective alternative to chemical catalysis. However, due to lipases’ unique structure, the reaction requires a biphasic system, which suffers from a low reaction efficiency caused by a limited interfacial area. The use of emulsion particles was found to be an effective way to increase the surface area and activity. This research focuses on cellulose as a natural surfactant for oil-in-water emulsions and evaluates the ability of lipase, introduced into the emulsion’s aqueous phase, to integrate with the emulsion microparticles and catalyze the transesterification reaction of high molecular weight esters dissolved in the particles’ cores. Cellulose-coated emulsion particles’ morphology was investigated by light, fluorescence and cryogenic scanning electron microscopy, which reveal the complex emulsion structure. Lipase activity was evaluated by measuring the hydrolysis of emulsified p-nitrophenyl dodecanoate and by the transesterification of emulsified methyl laurate and oleyl alcohol dissolved in decane. Both experiments demonstrated that lipase introduced in the aqueous medium can penetrate the emulsion particles, localize at the inner oil core interface and perform effective catalysis. Furthermore, in this system, lipase successfully catalyzed a transesterification reaction rather than hydrolysis, despite the dominant presence of water.

Neumann's principle based eigenvector approach for deriving non-vanishing tensor elements for nonlinear optics

Physical properties are commonly represented by tensors, such as optical susceptibilities. The conventional approach of deriving non-vanishing tensor elements of symmetric systems relies on the intuitive consideration of positive/negative sign flipping after symmetry operations, which could be tedious and prone to miscalculation. Here, we present a matrix-based approach that gives a physical picture centered on Neumann's principle. The principle states that symmetries in geometric systems are adopted by their physical properties. We mathematically apply the principle to the tensor expressions and show a procedure with clear physical intuition to derive non-vanishing tensor elements based on eigensystems. The validity of the approach is demonstrated by examples of commonly known second and third-order nonlinear susceptibilities of chiral/achiral surfaces, together with complicated scenarios involving symmetries such as D6 and Oh symmetries. We then further applied this method to higher-rank tensors that are useful for 2D and high-order spectroscopy. We also extended our approach to derive nonlinear tensor elements with magnetization, which is critical for measuring spin polarization on surfaces for quantum information technologies. A Mathematica code based on this generalized approach is included that can be applied to any symmetry and higher order nonlinear processes.

Dynamic Liquid-Liquid Interface: Applying a Spinning Interfacial Microreactor to Actively Converge Biphasic Reactants for the Enhanced Interfacial Reaction

A liquid-liquid interfacial reaction combines reactants with large polarity disparity to achieve greener and more efficient chemistry that is otherwise challenging in traditional single-phase systems. However, current interfacial approaches suffer from the need for a large amount of solvent/reactant/emulsifier and poor reaction performance arising from intrinsic thermodynamic constraints. Herein, we achieve an efficient interfacial reaction by creating a magnetic-responsive, microscale liquid-liquid interface and exploit its dynamic spinning motion to generate vortex-like hydrodynamic flows that rapidly converge biphasic reactants to the point-of-reaction. Notably, the spinning of this functional interface at 800 rpm boosts the reaction efficiency and its apparent equilibrium constant by > 500-fold and 10⁵-fold, respectively, higher than conventional methods that utilize bulk and/or non-dynamic liquid interfaces, even with external mechanical stirring. By driving reaction equilibrium toward favorable product formation, our unique design offers enormous opportunities to realize efficient multiphasic reactions crucial for diverse applications in chemical synthesis, environmental remediation, and even molecular recycling.

Nanoextraction based on surface nanodroplets for chemical preconcentration and determination

Liquid-liquid extraction based on surface nanodroplets, namely nanoextraction, can continuously extract and enrich target analytes from the flow of a sample solution. This sample preconcentration technique is easy to operate in a continuous flow system with a low consumption of organic solvent and a high enrichment factor. In this review, the evolution from single drop microextraction to advanced nanoextraction will be briefly introduced. Moreover, the formation principle and key features of surface nanodroplets will be summarized. Further, the major findings of nanoextraction combined with in-droplet chemistry toward sensitive and quantitative detection will be discussed. Finally, we will give our perspectives for the future trend of nanoextraction.

Biocides and techniques for their encapsulation: a review

Biocides are compounds that are broadly used to protect products and equipment against microbiological damage. Encapsulation can effectively increase physicochemical stability and allow for controlled release of encapsulated biocides. We categorized microencapsulation into coacervation, sol-gel, and self-assembly methods. The former comprises internal phase separation, interfacial polymerization, and multiple emulsions, and the latter include polymersomes and layer-by-layer techniques. The focus of this review is the description of these categories based on their microencapsulation methods and mechanisms. We discuss the key features and potential applications of each method according to the characteristics of the biocide to be encapsulated, relating the solubility of biocides to the capsule-forming materials, the reactivity between them and the desired release rate. The role of encapsulation in the safety and toxicity of biocide applications is also discussed. Furthermore, future perspectives for biocide applications and encapsulation techniques are presented.

Microscale hydrodynamic confinements: shaping liquids across length scales as a toolbox in life sciences

Hydrodynamic phenomena can be leveraged to confine a range of biological and chemical species without needing physical walls. In this review, we list methods for the generation and manipulation of microfluidic hydrodynamic confinements in free-flowing liquids and near surfaces, and elucidate the associated underlying theory and discuss their utility in the emerging area of open space microfluidics applied to life-sciences. Microscale hydrodynamic confinements are already starting to transform approaches in fundamental and applied life-sciences research from precise separation and sorting of individual cells, allowing localized bio-printing to multiplexing for clinical diagnosis. Through the choice of specific flow regimes and geometrical boundary conditions, hydrodynamic confinements can confine species across different length scales from small molecules to large cells, and thus be applied to a wide range of functionalities. We here provide practical examples and implementations for the formation of these confinements in different boundary conditions - within closed channels, in between parallel plates and in an open liquid volume. Further, to enable non-microfluidics researchers to apply hydrodynamic flow confinements in their work, we provide simplified instructions pertaining to their design and modelling, as well as to the formation of hydrodynamic flow confinements in the form of step-by-step tutorials and analytical toolbox software. This review is written with the idea to lower the barrier towards the use of hydrodynamic flow confinements in life sciences research.

Supramolecular Polymerization at Interfaces

Supramolecular polymers, originating from the interplay between polymer science and supramolecular chemistry, have attracted increasing interest in the scientific and industrial communities. To date, most supramolecular polymers are constructed in homogeneous solutions. Supramolecular polymerization normally takes place spontaneously in solutions, thus creating challenges in fabricating supramolecular polymers in a controlled manner. By combining supramolecular polymerization and interfacial polymerization, supramolecular polymerization can be transferred from homogeneous solutions to interfaces, which allows for the controlled production of supramolecular polymers. In this Perspective, we will summarize recent progress and the advantages in supramolecular polymerization at solid-liquid and liquid-liquid interfaces. Meanwhile, current challenges and opportunities in the field of supramolecular polymerization at interfaces are proposed and discussed. It is anticipated that this Perspective will inspire supramolecular polymerization at interfaces and facilitate the construction of supramolecular polymeric materials with diverse architectures and tailor-made functions.

Electrosynthesis of Biocompatible Free-Standing PEDOT Thin Films at a Polarized Liquid|Liquid Interface

Conducting polymers (CPs) find applications in energy conversion and storage, sensors, and biomedical technologies once processed into thin films. Hydrophobic CPs, like poly(3,4-ethylenedioxythiophene) (PEDOT), typically require surfactant additives, such as poly(styrenesulfonate) (PSS), to aid their aqueous processability as thin films. However, excess PSS diminishes CP electrochemical performance, biocompatibility, and device stability. Here, we report the electrosynthesis of PEDOT thin films at a polarized liquid|liquid interface, a method nonreliant on conductive solid substrates that produces free-standing, additive-free, biocompatible, easily transferrable, and scalable 2D PEDOT thin films of any shape or size in a single step at ambient conditions. Electrochemical control of thin film nucleation and growth at the polarized liquid|liquid interface allows control over the morphology, transitioning from 2D (flat on both sides with a thickness of <50 nm) to “Janus” 3D (with flat and rough sides, each showing distinct physical properties, and a thickness of >850 nm) films. The PEDOT thin films were p-doped (approaching the theoretical limit), showed high π–π conjugation, were processed directly as thin films without insulating PSS and were thus highly conductive without post-processing. This work demonstrates that interfacial electrosynthesis directly produces PEDOT thin films with distinctive molecular architectures inaccessible in bulk solution or at solid electrode–electrolyte interfaces and emergent properties that facilitate technological advances. In this regard, we demonstrate the PEDOT thin film’s superior biocompatibility as scaffolds for cellular growth, opening immediate applications in organic electrochemical transistor (OECT) devices for monitoring cell behavior over extended time periods, bioscaffolds, and medical devices, without needing physiologically unstable and poorly biocompatible PSS.

In Situ Liquid Phase TEM of Nanoparticle Formation and Diffusion in a Phase-Separated Medium

Colloidal nanoparticles are synthesized in a complex reaction mixture that has an inhomogeneous chemical environment induced by local phase separation of the medium. Nanoparticle syntheses based on micelles, emulsions, flow of different fluids, injection of ionic precursors in organic solvents, and mixing the metal organic phase of precursors with an aqueous phase of reducing agents are well established. However, the formation mechanism of nanoparticles in the phase-separated medium is not well understood because of the complexity originating from the presence of phase boundaries as well as nonuniform chemical species, concentrations, and viscosity in different phases. Herein, we investigate the formation mechanism and diffusion of silver nanoparticles in a phase-separated medium by using liquid phase transmission electron microscopy and many-body dissipative particle dynamics simulations. A quantitative analysis of the individual growth trajectories reveals that a large portion of silver nanoparticles nucleate and grow rapidly at the phase boundaries, where metal ion precursors and reducing agents from the two separated phases react to form monomers. The results suggest that the motion of the silver nanoparticles at the interfaces is highly affected by the interaction with polymers and exhibits superdiffusive dynamics because of the polymer relaxation.

Recent Progress on Asymmetric Carbon- and Silica-Based Nanomaterials: From Synthetic Strategies to Their Applications

HIGHLIGHTS

The synthetic strategies and fundamental mechanisms of various asymmetric carbon- and silica-based nanomaterials were systematically summarized. The advantages of asymmetric structure on their related applications were clarified by some representative applications of asymmetric carbon- and silica-based nanomaterials. The future development prospects and challenges of asymmetric carbon- and silica-based nanomaterials were proposed.

ABSTRACT

Carbon- and silica-based nanomaterials possess a set of merits including large surface area, good structural stability, diversified morphology, adjustable structure, and biocompatibility. These outstanding features make them widely applied in different fields. However, limited by the surface free energy effect, the current studies mainly focus on the symmetric structures, such as nanospheres, nanoflowers, nanowires, nanosheets, and core–shell structured composites. By comparison, the asymmetric structure with ingenious adjustability not only exhibits a larger effective surface area accompanied with more active sites, but also enables each component to work independently or corporately to harness their own merits, thus showing the unusual performances in some specific applications. The current review mainly focuses on the recent progress of design principles and synthesis methods of asymmetric carbon- and silica-based nanomaterials, and their applications in energy storage, catalysis, and biomedicine. Particularly, we provide some deep insights into their unique advantages in related fields from the perspective of materials’ structure–performance relationship. Furthermore, the challenges and development prospects on the synthesis and applications of asymmetric carbon- and silica-based nanomaterials are also presented and highlighted. [Image: see text]

Tailor-made urethane-linked alkyl-celluloses: A Promising Stabilizer for Oil-in-oil Pickering Emulsions

Oil-in-oil emulsions or nonaqueous emulsions are formulated from two immiscible organic solvents, which provide an ideal platform for water-sensitive systems such as readily hydrolyzable reagents and polymerization in anhydrous conditions....

Spontaneous formation of barium sulfate crystals at liquid–liquid interfaces

Interfacial ion transfer from organic phase to aqueous phase is employed as the basis for formation of barium sulfate crystals close to the interface.

Nanoconfinement in miniemulsion increases reaction rates of thiol–ene photopolymerization and yields high molecular weight polymers

Photoinitiated thiol–ene polymerization was performed in bulk and miniemulsion. We show that the compartmentalization of the reaction inside nanodroplets led to faster reaction kinetics and yielded polymers with higher molecular weight.

Strategies to design extrinsic stimuli-responsive dental polymers capable of autorepairing

Objectives

For many years, the requirements for dental polymers were limited to inertially filling the cavity and restoring form, function, and esthetics. Inorganic filler systems were widely enhanced to maximize the mechanical properties and optimize finishing and polishing procedures. The development of alternative photoinitiator systems also improved the carbon-carbon double bond conversion, increasing biocompatibility, wear, and stain resistance. However, despite laudable progress, the clinical life span of dental restorations is still limited, and their replacement is the most common procedure in dental offices worldwide. In the last few years, the development of materials with the potential to adapt to physiological stimuli has emerged as a key step to elevating dental polymers to a higher excellence level. In this context, using polymeric networks with self-healing properties that allow for the control of the propagation of microcracks is an appealing strategy to boost the lifetime of dental restorations. This review aims to report the current state-of-the-art of extrinsic self-healing dental polymers and provide insights to open new avenues for further developments. General classification of the self-healing polymeric systems focusing on the current extrinsic strategies used to inhibit microcracks propagation in dental polymers and recover their structural integrity and toughness are presented.

Search Strategy

An electronic search was perfomed using PubMed, Google Scholar, and Scopus databases. Only studies published in English on extrinsic self-healing polymeric systems were included.

Overall Conclusions

Self-healing materials are still in their infancy in dentistry, and the future possibilities are almost limitless. Although the mouth is a unique environment and the restorative materials have to survive chemical, physical, and mechanical challenges, which limits the use of some strategies that might compromise their physicochemical performance, there are countless untapped opportunities to overcome the challenges of the current systems and advance the field.

Temperature-responsive Pickering high internal phase emulsions for recyclable efficient interfacial biocatalysis

The field of biocatalysis is expanding owing to the increasing demand for efficient low-cost green chemical processes. However, a feasible strategy for achieving product separation, enzyme recovery, and high catalytic efficiency in biocatalysis remains elusive. Herein, we present thermoresponsive Pickering high internal phase emulsions (HIPEs) as controllable scaffolds for efficient biocatalysis; these HIPEs demonstrate a transition between emulsification and demulsification depending on temperature. Ultra-high-surface-area Pickering HIPEs were stabilized by Candida antarctica lipase B immobilized on starch particles modified with butyl glycidyl ether and glycidyl trimethyl ammonium chloride, thus simplifying the separation and reuse processes and significantly improving the catalytic efficiency. In addition, the switching temperature can be precisely tuned by adjusting the degree of substitution of the modified starches to meet the temperature demands of various enzymes. We believe that this system provides a green platform for various interfacial biocatalytic processes of industrial interest.

The thermoresponsive Pickering high internal phase emulsions stabilized by starch particles as controllable scaffolds for efficient biocatalysis, which simplified the separation and reuse processes and significantly improved the catalytic efficiency.

Water as a monomer: synthesis of an aliphatic polyethersulfone from divinyl sulfone and water

Using water as a monomer in polymerization reactions presents a unique and exquisite strategy towards more sustainable chemistry. Herein, the feasibility thereof is demonstrated by the introduction of the oxa-Michael polyaddition of water and divinyl sulfone. Upon nucleophilic or base catalysis, the corresponding aliphatic polyethersulfone is obtained in an interfacial polymerization at room temperature in high yield (>97%) within an hour. The polyethersulfone is characterized by relatively high molar mass averages and a dispersity around 2.5. The polymer was tested as a solid polymer electrolyte with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as the salt. Free-standing amorphous membranes were prepared by a melt process in a solvent-free manner. The polymer electrolyte containing 15 wt% LiTFSI featured an oxidative stability of up to 5.5 V vs. Li/Li⁺ at 45 °C and a conductivity of 1.45 × 10⁻⁸ S cm⁻¹ at room temperature.

This study describes the first example of the polymerization of water as one of two monomers. The obtained polymer allows for a solvent-free preparation of polymer electrolyte membranes exhibiting a high oxidative stability.

g-C3N4: Properties, Pore Modifications, and Photocatalytic Applications

Graphitic carbon nitride (g-C3N4), as a polymeric semiconductor, is promising for ecological and economical photocatalytic applications because of its suitable electronic structures, together with the low cost, facile preparation, and metal-free feature. By modifying porous g-C3N4, its photoelectric behaviors could be facilitated with transport channels for photogenerated carriers, reactive substances, and abundant active sites for redox reactions, thus further improving photocatalytic performance. There are three types of methods to modify the pore structure of g-C3N4: hard-template method, soft-template method, and template-free method. Among them, the hard-template method may produce uniform and tunable pores, but requires toxic and environmentally hazardous chemicals to remove the template. In comparison, the soft templates could be removed at high temperatures during the preparation process without any additional steps. However, the soft-template method cannot strictly control the size and morphology of the pores, so prepared samples are not as orderly as the hard-template method. The template-free method does not involve any template, and the pore structure can be formed by designing precursors and exfoliation from bulk g-C3N4 (BCN). Without template support, there was no significant improvement in specific surface area (SSA). In this review, we first demonstrate the impact of pore structure on photoelectric performance. We then discuss pore modification methods, emphasizing comparison of their advantages and disadvantages. Each method's changing trend and development direction is also summarized in combination with the commonly used functional modification methods. Furthermore, we introduce the application prospects of porous g-C3N4 in the subsequent studies. Overall, porous g-C3N4 as an excellent photocatalyst has a huge development space in photocatalysis in the future.

Polymer nano-systems for the encapsulation and delivery of active biomacromolecular therapeutic agents

Biomacromolecular therapeutic agents, particularly proteins, antigens, enzymes, and nucleic acids are emerging as powerful candidates for the treatment of various diseases and the development of the recent vaccine based on mRNA highlights the enormous potential of this class of drugs for future medical applications. However, biomacromolecular therapeutic agents present an enormous delivery challenge compared to traditional small molecules due to both a high molecular weight and a sensitive structure. Hence, the translation of their inherent pharmaceutical capacity into functional therapies is often hindered by the limited performance of conventional delivery vehicles. Polymer drug delivery systems are a modular solution able to address those issues. In this review, we discuss recent developments in the design of polymer delivery systems specifically tailored to the delivery challenges of biomacromolecular therapeutic agents. In the future, only in combination with a multifaceted and highly tunable delivery system, biomacromolecular therapeutic agents will realize their promising potential for the treatment of diseases and for the future of human health.

Chemical Reactions at the Interface Periphery of Colliding Droplets Studied by Raman Image Analysis

Chemical reactions at the interface of reactive solutions are of importance for a full understanding of solution reactions. We investigate the chemical reaction induced by the collision of two droplets. The extent of the reaction is measured by analyzing spectra and images of the Raman scattered light emerging from the interface of the colliding droplets of H₂SO₄ and NH₃ aqueous solutions. The obtained product concentration is lower than that expected from a simple diffusion model. The result indicates that a fresh interface is produced at the periphery of the mixing region of the colliding droplets. This study provides the basis to extend this method to measure rapid chemical reactions at the interface of colliding droplets.

Characterizing Cation Chemistry for Anion Exchange Membranes-para-Alkyl-Substituted Benzyltetramethylimidazolium and Benzyltrimethylammonium Salts in Base

Base stability and degradation of imidazolium-functional materials have been a focus of research on anion exchange membranes for electrochemical devices. Despite extensive work, mechanistic questions can cloud efforts to correlate results from model compounds and polymeric membranes. Here, we report an NMR study of behavior in aqueous KOH of benzyltetramethylimidazolium and benzyltrimethylammonium salts with and without para-alkyl-substitution to probe whether base attack at the alkyl substituent plays a role in the reaction pathways. In all cases, the major products from the imidazolium salts are consistent with hydrolytic ring fragmentation as the principal mode of decomposition. Also, relative decomposition kinetics for both types of salts provided no conclusive evidence for a change in reaction mechanism upon introduction of the alkyl substituent. While our data do not rule out base attack at the alkyl group in the cases where rate differences were noted, these differences appear to be better attributed to reaction medium effects of submicrometer oil phase droplets arising from salt aggregation.