Isolated Surface Hydrides: Formation, Structure, and Reactivity

Environment-Driven Variability in Absolute Band Edge Positions and Work Functions of Reduced Ceria

The absolute band edge positions and work function (Φ) are the key electronic properties of metal oxides that determine their performance in electronic devices and photocatalysis. However, experimental measurements of these properties often show notable variations, and the mechanisms underlying these discrepancies remain inadequately understood. In this work, we focus on ceria (CeO2), a material renowned for its outstanding oxygen storage capacity, and combine theoretical and experimental techniques to demonstrate environmental modifications of its ionization potential (IP) and Φ. Under O-deficient conditions, reduced ceria exhibits a decreased IP and Φ with significant sensitivity to defect distributions. In contrast, the IP and Φ are elevated in O-rich conditions due to the formation of surface peroxide species. Surface adsorbates and impurities can further augment these variabilities under realistic conditions. We rationalize the shifts in energy levels by separating the individual contributions from bulk and surface factors, using hybrid quantum mechanical/molecular mechanical (QM/MM) embedded-cluster and periodic density functional theory (DFT) calculations supported by interatomic-potential-based electrostatic analyses. Our results highlight the critical role of on-site electrostatic potentials in determining the absolute energy levels in metal oxides, implying a dynamic evolution of band edges under catalytic conditions.

Homolytic H2 dissociation for enhanced hydrogenation catalysis on oxides

The limited surface coverage and activity of active hydrides on oxide surfaces pose challenges for efficient hydrogenation reactions. Herein, we quantitatively distinguish the long-puzzling homolytic dissociation of hydrogen from the heterolytic pathway on Ga2O3, that is useful for enhancing hydrogenation ability of oxides. By combining transient kinetic analysis with infrared and mass spectroscopies, we identify the catalytic role of coordinatively unsaturated Ga3+ in homolytic H2 dissociation, which is formed in-situ during the initial heterolytic dissociation. This site facilitates easy hydrogen dissociation at low temperatures, resulting in a high hydride coverage on Ga2O3 (H/surface Ga3+ ratio of 1.6 and H/OH ratio of 5.6). The effectiveness of homolytic dissociation is governed by the Ga-Ga distance, which is strongly influenced by the initial coordination of Ga3+. Consequently, by tuning the coordination of active Ga3+ species as well as the coverage and activity of hydrides, we achieve enhanced hydrogenation of CO2 to CO, methanol or light olefins by 4-6 times.

A Supported Ziegler-Type Organohafnium Site Metabolizes Polypropylene

Cp2Hf(CH3)2 reacts with silica containing strong aluminum Lewis sites to form Cp2Hf-13CH3+ paired with aluminate anions. Solid-state NMR studies show that this reaction also forms neutral organohafnium and hafnium sites lacking methyl groups. Cp2Hf-13CH3+ reacts with isotatic polypropylene (iPP, Mn = 13.3 kDa; Đ = 2.4; mmmm = 94%; ∼110 C3H6/Hf) and H2 to form oils with moderate molecular weights (Mn = 290-1200 Da) in good yields. The aliphatic oils show characteristic 13C{1H} NMR properties consistent with complete loss of diastereoselectivity and formation of regioirregular errors under 1 atm H2. These results show that a Ziegler-Natta-type active site is compatible in a common reaction used to digest waste plastic into smaller aliphatic fragments.

Relay Catalysis for Highly Selective Conversion of Methanol to Ethylene in Syngas

The precise C-C coupling is a challenging goal in C1 chemistry. The conversion of methanol, a cheap and easily available C1 feedstock, into value-added and largely demanded olefins has been playing a game-changing role in the production of olefins. The current methanol-to-olefin (MTO) process, however, suffers from limited selectivity to a specific olefin. Here, we present a relay-catalysis route for the high-selective conversion of methanol to ethylene in syngas (H2/CO) typically used for methanol synthesis. A bifunctional catalyst composed of selectively dealuminated H-MOR zeolite and ZnO-TiO2, which implemented methanol carbonylation with CO to acetic acid and selective acetic acid hydrogenation to ethylene in tandem, offered ethylene selectivity of 85% at complete methanol conversion at 583 K. The selective removal of Brønsted acid sites in the 12-membered ring channel of H-MOR favors the selectivity of acetic acid in CH3OH carbonylation. The high capabilities of ZnO-TiO2 in the adsorption of acetic acid and the activation of H2 play key roles in selective hydrogenation of acetic acid to ethylene. Our work provides a promising relay-catalysis strategy for precise C-C coupling of C1 to C2 molecules.

Atomic-Scale Visualization of Heterolytic H2 Dissociation and COx Hydrogenation on ZnO under Ambient Conditions

Studying catalytic hydrogenation reactions on oxide surfaces at the atomic scale has been challenging because of the typical occurrence of these processes at ambient or elevated pressures, rendering them less accessible to atomic-scale techniques. Here, we report an atomic-scale study on H2 dissociation and the hydrogenation of CO and CO2 on ZnO using ambient pressure scanning tunneling microscopy, ambient pressure X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. We directly visualized the heterolytic dissociation of H2 on ZnO(101̅0) under ambient pressure and found that dissociation reaction does not require the assistance of surface defects. The presence of CO or CO2 on ZnO at 300 K does not impede the availability of surface sites for H2 dissociation; instead, CO can even enhance the stability of coadsorbed hydride species, thereby facilitating their dissociative adsorption. Our results show that hydride is the active species for hydrogenation, while hydroxyl cannot hydrogenate CO/CO2 on ZnO. Both AP studies and DFT calculations showed that the hydrogenation of CO2 on ZnO is thermodynamically and kinetically more favorable compared to that of CO hydrogenation. Our results point toward a two-step mechanism for CO hydrogenation, involving initial oxidation to CO2 at step sites on ZnO followed by reaction with hydride to form formate. These findings provide molecular insights into the hydrogenation of CO/CO2 on ZnO and deepen our understanding of syngas conversion and oxide catalysis in general.

Molecular Alumo- and Gallosilicate Hydrides Functionalized with Terminal M(NR2)3 and Bridging M(NR2)2 (M = Ti, Zr, Hf; R = Me, Et) Moieties

A general synthetic strategy for the systematic synthesis of group 4 MIV heterometallic complexes LMIII(H)(μ-O)Si(μ-O)(OtBu)2}nMIV(NR2)4-n (L = {[HC{C(Me)N(2,6-iPr2C6H3)}2; MIII = Al or Ga; n = 1 or 2; MIV = Ti, Zr, Hf; R = Me, Et), based on alumo- or gallosilicate hydride ligands bearing a Si-OH moiety, is presented. The challenging isolation of these metalloligands involved two strategies. On the one hand, the acid-base reaction of LAlH2 with (HO)2Si(OtBu)2 yielded LAlH(μ-O)Si(OH)(OtBu)2 (1), while on the other hand, the oxidative addition of (HO)2Si(OtBu)2 to LGa produced the gallium analog (2). These metalloligands successfully stabilized two hydrogen atoms with different acid-base properties (MIII-H and SiO-H) in the same molecule. Reactivity studies between 1 and 2 and group 4 amides MIV(NR2)4 (MIV = Ti, Zr, Hf; R = Me, Et) and tuning the reactions conditions and stoichiometry led to isolation and structural characterization of heterometallic complexes 3-11 with a 1:1 or 2:1 metalloligand/MIV ratio. Notably, some of these molecular heterometallic silicate complexes stabilize for the first time terminal (O3Si-O-)MIV(NR2)3 moieties known from single-site silica-grafted species. Furthermore, the aluminum-containing heterometallic complexes possess Al-H vibrational energies similar to those reported for modified alumina surfaces, which makes them potentially suitable models for the proposed MIV species grafted onto silica/alumina surfaces with hydride and dihydride architectures.

Oxidation and Reduction of Polycrystalline Cerium Oxide Thin Films in Hydrogen

This study investigates the oxidation state of ceria thin films' surface and subsurface under 100 mTorr hydrogen using ambient pressure X-ray photoelectron spectroscopy. We examine the influence of the initial oxidation state and sample temperature (25-450 °C) on the interaction with hydrogen. Our findings reveal that the oxidation state during hydrogen interaction involves a complex interplay between oxidizing hydride formation, reducing thermal reduction, and reducing formation of hydroxyls followed by water desorption. In all studied conditions, the subsurface exhibits a higher degree of oxidation compared to the surface, with a more subtle difference for the reduced sample. The reduced samples are significantly hydroxylated and covered with molecular water at 25 °C. We also investigate the impact of water vapor impurities in hydrogen. We find that although 1 × 10-6 Torr water vapor oxidizes ceria, it is probably not the primary driver behind the oxidation of reduced ceria in the presence of hydrogen.

Prediction of Stable Surfaces of Metal Oxides through the Unsaturated Coordination Index

This study proposes the unsaturated coordination index, σ, as a potential descriptor of the stability of metal-oxide surfaces cleaved from bulk. The value of σ, the number of missing bonds per unit area, can be obtained very quickly using only crystallographic data, namely, the bulk geometry. The surface energies of various binary oxides, with and without atom relaxation, were calculated. Their correlations with σ had good coefficients of determination (R2) values, particularly in high-symmetry crystals. The proposed descriptor is very useful for an initial evaluation of stable metal-oxide surfaces without conducting any surface model calculations.

Neutron Scattering Studies of Heterogeneous Catalysis

Understanding the structural dynamics/evolution of catalysts and the related surface chemistry is essential for establishing structure-catalysis relationships, where spectroscopic and scattering tools play a crucial role. Among many such tools, neutron scattering, though less-known, has a unique power for investigating catalytic phenomena. Since neutrons interact with the nuclei of matter, the neutron-nucleon interaction provides unique information on light elements (mainly hydrogen), neighboring elements, and isotopes, which are complementary to X-ray and photon-based techniques. Neutron vibrational spectroscopy has been the most utilized neutron scattering approach for heterogeneous catalysis research by providing chemical information on surface/bulk species (mostly H-containing) and reaction chemistry. Neutron diffraction and quasielastic neutron scattering can also supply important information on catalyst structures and dynamics of surface species. Other neutron approaches, such as small angle neutron scattering and neutron imaging, have been much less used but still give distinctive catalytic information. This review provides a comprehensive overview of recent advances in neutron scattering investigations of heterogeneous catalysis, focusing on surface adsorbates, reaction mechanisms, and catalyst structural changes revealed by neutron spectroscopy, diffraction, quasielastic neutron scattering, and other neutron techniques. Perspectives are also provided on the challenges and future opportunities in neutron scattering studies of heterogeneous catalysis.

Effects of surface acidity on the structure of organometallics supported on oxide surfaces

Well-defined organometallics supported on high surface area oxides are promising heterogeneous catalysts. An important design factor in these materials is how the metal interacts with the functionalities on an oxide support, commonly anionic X-type ligands derived from the reaction of an organometallic M-R with an -OH site on the oxide. The metal can either form a covalent M-O bond or form an electrostatic M⁺⋯^-O ion-pair, which impacts how well-defined organometallics will interact with substrates in catalytic reactions. A less common reaction pathway involves the reaction of a Lewis site on the oxide with the organometallic, resulting in abstraction to form an ion-pair, which is relevant to industrial olefin polymerization catalysts. This Feature Article views the spectrum of reactivity between an organometallic and an oxide through the prism of Brønsted and/or Lewis acidity of surface sites and draws analogies to the molecular frame where Lewis and Brønsted acids are known to form reactive ion-pairs. Applications of the well-defined sites developed in this article are also discussed.

Cationic Tantalum Hydrides Catalyze Hydrogenolysis and Alkane Metathesis Reactions of Paraffins and Polyethylene

Sulfated aluminum oxide (SAO), a high surface area material containing sulfate anions that behave like weakly coordinating anions, reacts with Ta(═CH^tBu)(CH₂^tBu)₃ to form [Ta(CH₂^tBu)₂(O-)₂][SAO] (1). Subsequent treatment with H₂ forms Ta-H⁺ sites supported on SAO that are active in hydrogenolysis and alkane metathesis reactions. In both reactions Ta-H⁺ is more active than related neutral Ta-H sites supported on silica. This reaction chemistry extends to melts of high-density polyethylene (HDPE), where Ta-H⁺ converts 30% of a low molecular weight HDPE (M_n = 2.5 kg mol^-1; Đ = 3.6) to low molecular weight paraffins under hydrogenolysis conditions. Under alkane metathesis conditions Ta-H⁺ converts this HDPE to a high MW fraction (M_n = 6.2 kDa; Đ = 2.3) and low molecular weight alkane products (C₁₃-C₃₂). These results show that incorporating charge as a design element in supported d⁰ metal hydrides is a viable strategy to increase the reaction rate in challenging reactions involving reorganization of C-C bonds in alkanes.

Ceria-Supported Cobalt Catalyst for Low-Temperature Methanation at Low Partial Pressures of CO2

The direct catalytic conversion of atmospheric CO₂ to valuable chemicals is a promising solution to avert negative consequences of rising CO₂ concentration. However, heterogeneous catalysts efficient at low partial pressures of CO₂ still need to be developed. Here, we explore Co/CeO₂ as a catalyst for the methanation of diluted CO₂ streams. This material displays an excellent performance at reaction temperatures as low as 175 °C and CO₂ partial pressures as low as 0.4 mbar (the atmospheric CO₂ concentration). To gain mechanistic understanding of this unusual activity, we employed in situ X-ray photoelectron spectroscopy and operando infrared spectroscopy. The higher surface concentration and reactivity of formates and carbonyls-key reaction intermediates-explain the superior activity of Co/CeO₂ as compared to a conventional Co/SiO₂ catalyst. This work emphasizes the catalytic role of the cobalt-ceria interface and will aid in developing more efficient CO₂ hydrogenation catalysts.

Plasma Functionalization of Silica Bilayer Polymorphs

Ultrathin silica films are considered suitable two-dimensional model systems for the study of fundamental chemical and physical properties of all-silica zeolites and their derivatives, as well as novel supports for the stabilization of single atoms. In the present work, we report the creation of a new model catalytic support based on the surface functionalization of different silica bilayer (BL) polymorphs with well-defined atomic structures. The functionalization is carried out by means of in situ H-plasma treatments at room temperature. Low energy electron diffraction and microscopy data indicate that the atomic structure of the films remains unchanged upon treatment. Comparing the experimental results (photoemission and infrared absorption spectra) with density functional theory simulations shows that H₂ is added via the heterolytic dissociation of an interlayer Si-O-Si siloxane bond and the subsequent formation of a hydroxyl and a hydride group in the top and bottom layers of the silica film, respectively. Functionalization of the silica films constitutes the first step into the development of a new type of model system of single-atom catalysts where metal atoms with different affinities for the functional groups can be anchored in the SiO₂ matrix in well-established positions. In this way, synergistic and confinement effects between the active centers can be studied in a controlled manner.

Hydride Generation on the Cu-Doped CeO2(111) Surface and Its Role in CO2 Hydrogenation Reactions

Ceria-based catalysts exhibit great activity in catalyzing selective hydrogenation of CO2 to methanol. However, the underlying mechanism of this reaction, especially the generation of active H species, remains unclear. In this work, we performed extensive density functional theory calculations corrected by on-site Coulomb interaction (DFT + U) to investigate the H2 dissociation and the reaction between the active H species and CO2 on the pristine and Cu-doped CeO2(111) (denoted as Cu/CeO2(111)) surfaces. Our calculations evidenced that the heterolytic H2 dissociation for hydride generation can more readily occur on the Cu/CeO2(111) surface than on the pristine CeO2(111) surface. We also found that the Cu dopant can facilitate the formation of surface oxygen vacancies, further promoting the generation of hydride species. Moreover, the adsorption of CO2 and the hydrogenation of CO2 to HCOO* can be greatly promoted on the Cu/CeO2(111) surface with hydride species, which can lead to the high activity and selectivity toward CO2 hydrogenation to methanol.

Understanding and controlling the formation of surface anion vacancies for catalytic applications

Systematic computational efforts aimed at calculating surface anion vacancy formation energies as important descriptors of catalytic performance are summarized.

Homogeneous catalysis with polyhydride complexes

This review analyzes the role of transition metal polyhydrides as homogeneous catalysts for organic reactions. Discussed reactions involve nearly every main organic functional group.

High-loading Ga-exchanged MFI zeolites as selective and coke-resistant catalysts for nonoxidative ethane dehydrogenation

A high-loading Ga-exchanged MFI zeolite was developed for efficient ethane dehydrogenation. Its high catalytic performance is ascribed to both the low amount of Brønsted acid sites and the major formation of [GaH2]+ ions among isolated Ga hydrides.

Enabling Semihydrogenation of Alkynes to Alkenes by Using a Calcium Palladium Complex Hydride

Selective hydrogenation of alkynes to alkenes requires a catalytic site with suitable electronic properties for modulating the adsorption and conversion of alkyne, alkene as well as dihydrogen. Here, we report a complex palladium hydride, CaPdH₂, featured by electron-rich [PdH₂]^δ- sites that are surrounded by Ca cations that interacts with C₂H₂ and C₂H₄ via σ-bonding to Pd and unusual cation-π interaction with Ca, resulting in a much weaker chemisorption than those of Pd metal catalysts. Concomitantly, the dissociation of H₂ and hydrogenation of C₂H_x (x = 2-4) species experience significant energy barriers over CaPdH₂, which is fundamentally different from those reported Pd-based catalysts. Such a unique catalytic environment enables CaPdH₂, the very first complex transition-metal hydride catalyst, to afford a high alkene selectivity for the semihydrogenation of alkynes.

Activity Trends in the Propane Dehydrogenation Reaction Catalyzed by MIII Sites on an Amorphous SiO2 Model: A Theoretical Perspective

One class of particularly active catalysts for the Propane Dehydrogenation (PDH) reaction are well-defined M(III) sites on amorphous SiO2. In the present work, we focus on evaluating the catalytic trends of the PDH for four M(III) single-sites (Cr, Mo, Ga and In) on a realistic amorphous model of SiO2 using density functional theory-based calculations and the energetic span model. We considered a catalytic pathway spanned by three reaction steps taking place on selected MIII–O pair of the SiO2 model: σ-bond metathesis of propane on a MIII–O bond to form M-propyl and O–H group, a β-H transfer step forming M–H and propene, and the H–H coupling step producing H2 and regenerating the initial M–O bond. With the application of the energetic span model, we found that the calculated catalytic activity for Ga and Cr is comparable to the ones reported at the experimental level, enabling us to benchmark the model and the methodology used. Furthermore, results suggest that both In(III) and Mo(III) on SiO2 are potential active catalysts for PDH, provided they can be synthesized and are stable under PDH reaction conditions.

Hydride species on oxide catalysts

Hydride species on oxide catalysts are widely involved in oxide-catalyzed reactions, and relevant fundamental understanding is important to establish reaction mechanisms and structure-performance relations of oxide catalysts. In this topical review, recent progresses on the formation and reactivity of hydride species on the surface or in the bulk of oxides are briefly summarized. Firstly, characterization techniques for hydride species are introduced. Secondly, formation of hydride species on the surface or in the bulk of various oxides and their reactivity in oxide-catalyzed hydrogenation and dehydrogenation reactions are reviewed. Finally, short summary and outlook are given.

Reductive Hydrogenation under Single-Site Control: Generation and Reactivity of a Transient NHC-Stabilized Tantalum(III) Alkoxide

One of the most attractive routes for the preparation of reactive tantalum(III) species relies on the efficient salt-free hydrogenolysis of tantalum(V) alkyls or tantalum(V) alkylidenes, a process known as reductive hydrogenation. For silica-crafted tantalum alkyls and alkylidenes, this process necessarily proceeds at well-separated tantalum centers, while related reductive hydrogenations in homogeneous solution commonly involve dimeric complexes. Herein, an NHC scaffold was coordinated to a novel tri(alkoxido)tantalum(V) alkylidene to circumvent the formation of dimers during reductive hydrogenation. Employing this new model system, a key intermediate of the process, namely a hydrido-tantalum alkyl, was isolated for the first time and shown to exhibit a bidirectional reactivity. Upon being heated, the latter complex was found to undergo either an α-elimination or a reductive alkane elimination. In the (overall unproductive) α-elimination step, H₂ and the parent alkylidene were regenerated, while the sought-after transient d²-configured tantalum(III) derivative was produced along the reaction coordinate of the reductive alkane elimination. The reactive low-valence metal center was found to rapidly attack one of the NHC substituents via an oxidative C-H activation, which led to the formation of a cyclometalated tantalum(V) hydride. The proposed elemental steps are in line with kinetic data, deuterium labeling experiments, and density functional theory (DFT) modeling studies. DFT calculations also indicated that the S = 0 spin ground state of the Ta(III) center plays a crucial role in the cyclometalation reaction. The cyclometalated Ta(V) hydride was further investigated and reacted with several alkenes and alkynes. In addition to a rich insertion and isomerization chemistry, these studies also revealed that the former hydride may undergo a formal cycloreversion and thus serve as a tantalum(III) synthon, although the original tantalum(III) intermediate is not involved in this process. The latter reactivity was observed upon reaction with internal alkynes and led to the corresponding η²-alkyne derivatives via vinyl intermediates, which rearrange via a remarkable, hitherto unprecedented, hydrogen shift reaction.

Strain in Silica-Supported Ga(III) Sites: Neither Too Much nor Too Little for Propane Dehydrogenation Catalytic Activity

Well-defined Ga(III) sites on SiO₂ are highly active, selective, and stable catalysts in the propane dehydrogenation (PDH) reaction. In this contribution, we evaluate the catalytic activity toward PDH of tricoordinated and tetracoordinated Ga(III) sites on SiO₂ by means of first-principles calculations using realistic amorphous periodic SiO₂ models. We evaluated the three reaction steps in PDH, namely, the C-H activation of propane to form propyl, the β-hydride (β-H) transfer to form propene and a gallium hydride, and the H-H coupling to release H₂, regenerating the initial Ga-O bond and closing the catalytic cycle. Our work shows how Brønsted-Evans-Polanyi relationships are followed to a certain extent for these three reaction steps on Ga(III) sites on SiO₂ and highlights the role of the strain of the reactive Ga-O pairs on such sites of realistic amorphous SiO₂ models. It also shows how transition-state scaling holds very well for the β-H transfer step. While highly strained sites are very reactive sites for the initial C-H activation, they are more difficult to regenerate. The corresponding less strained sites are not reactive enough, pointing to the need for the right balance in strain to be an effective site for PDH. Overall, our work provides an understanding of the intrinsic activity of acidic Ga single sites toward the PDH reaction and paves the way toward the design and prediction of better single-site catalysts on SiO₂ for the PDH reaction.

Well-Defined, Silica-Supported Homobimetallic Nickel Hydride Hydrogenation Catalyst

There is an increasing interest to replace precious metal-based catalysts by earth-abundant nonprecious metals due to higher costs, toxicity, and declining availability of the former. Here, the synthesis of a well-defined supported nickel hydrogenation catalyst prepared by surface organometallic chemistry is reported. For this purpose, [LNi(μ-H)]₂ (L = HC(CMeNC₆H₃(ⁱPr)₂)₂) was grafted on partially dehydroxylated silica to give a homobimetallic H- and O(silica)-bridged Ni₂ complex. The structure of the latter was confirmed by infrared spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure analyses as well as hydride titration studies. The immobilized catalyst was capable of hydrogenating alkenes and alkynes at low temperatures without prior activation. As an example, ethene can be hydrogenated with an initial turnover frequency of 25.5 min^-1 at room temperature.

Interaction of Hydrogen with Ceria: Hydroxylation, Reduction, and Hydride Formation on the Surface and in the Bulk

The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO2 ) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO2 (111) thin films and CeO2 powders, and theoretical calculations of CeO2 (111) surfaces with oxygen vacancies (Ov ) at the surface and in the bulk. We show that, on a stoichiometric CeO2 (111) surface, H2 dissociates and forms surface hydroxyls (OH). On the pre-reduced CeO2-x samples, both films and powders, hydroxyls and hydrides (Ce-H) are formed on the surface as well as in the bulk, accompanied by the Ce3+ ↔ Ce4+ redox reaction. As the Ov concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At higher temperatures, surface hydroxyls can react to produce water and create additional oxygen vacancies, increasing its concentration, which controls the H2 /CeO2 interaction. The results demonstrate a large diversity of reaction pathways, which have to be taken into account for better understanding of reactivity of ceria-based catalysts in a hydrogen-rich atmosphere.

Nanoparticle O-H Bond Dissociation Free Energies from Equilibrium Measurements of Cerium Oxide Colloids

A novel equilibrium strategy for measuring the hydrogen atom affinity of colloidal metal oxide nanoparticles is presented. Reactions between oleate-capped cerium oxide nanoparticle colloids (nanoceria) and organic proton-coupled electron transfer (PCET) reagents are used as a model system. Nanoceria redox changes, or hydrogen loadings, and overall reaction stoichiometries were followed by both ¹H NMR and X-ray absorption near-edge spectroscopies. These investigations revealed that, in many cases, reactions between nanoceria and PCET reagents reach equilibrium states with good mass balance. Each equilibrium state is a direct measure of the bond strength, or bond dissociation free energy (BDFE), between nanoceria and hydrogen. Further studies, including those with larger nanoceria, indicated that the relevant bond is a surface O-H. Thus, we have measured surface O-H BDFEs for nanoceria-the first experimental BDFEs for any nanoscale metal oxide. Remarkably, the measured CeO-H BDFEs span 13 kcal mol^-1 (0.56 eV) with changes in the average redox state of the nanoceria colloid. Possible chemical models for this strong dependence are discussed. We propose that the tunability of ceria BDFEs may be important in explaining its effectiveness in catalysis. More generally, metal oxide BDFEs have been used as predictors of catalyst efficacy that, traditionally, have only been accessible by computational methods. These results provide important experimental benchmarks for metal oxide BDFEs and demonstrate that the concepts of molecular bond strength thermochemistry can be applied to nanoscale materials.

Surface activation by electron scavenger metal nanorod adsorption on TiH2, TiC, TiN, and Ti2O3

Metal/oxide support perimeter sites are known to provide unique properties because the nearby metal changes the local environment on the support surface. In particular, the electron scavenger effect reduces the energy necessary for surface anion desorption, and thereby contributes to activation of the (reverse) Mars-van Krevelen mechanism. This study investigated the possibility of such activation in hydrides, carbides, nitrides, and sulfides. The work functions (WFs) of known hydrides, carbides, nitrides, oxides, and sulfides with group 3, 4, or 5 cations (Sc, Y, La, Ti, Zr, Hf, V, Nb, and Ta) were calculated. The WFs of most hydrides, carbides, and nitrides are smaller than the WF of Ag, implying that the electron scavenger effect may occur when late transition metal nanoparticles are adsorbed on the surface. The WF of oxides and sulfides decreases when reduced. The surface anion vacancy formation energy correlates well with the bulk formation energy in carbides and nitrides, while almost no correlation is found in hydrides because of the small range of surface hydrogen vacancy formation energy values. The electron scavenger effect is explicitly observed in nanorods adsorbed on TiH2 and Ti2O3; the surface vacancy formation energy decreases at anion sites near the nanorod, and charge transfer to the nanorod happens when an anion is removed at such sites. Activation of hydrides, carbides, and nitrides by nanorod adsorption and screening support materials through WF calculation are expected to open up a new category of supported catalysts.