Biobased Amines: From Synthesis to Polymers; Present and Future

Site-selective α-C(sp3)-H arylation of dialkylamines via hydrogen atom transfer catalysis-enabled radical aryl migration

Site-selective C(sp3)-H arylation is an appealing strategy to synthesize complex arene structures but remains a challenge facing synthetic chemists. Here we report the use of photoredox-mediated hydrogen atom transfer (HAT) catalysis to accomplish the site-selective α-C(sp3)-H arylation of dialkylamine-derived ureas through 1,4-radical aryl migration, by which a wide array of benzylamine motifs can be incorporated to the medicinally relevant systems in the late-stage installation steps. In contrast to previous efforts, this C-H arylation protocol exhibits specific site-selectivity, proforming predominantly on sterically more-hindered secondary and tertiary α-amino carbon centers, while the C-H functionalization of sterically less-hindered N-methyl group can be effectively circumvented in most cases. Moreover, a diverse range of multi-substituted piperidine derivatives can be obtained with excellent diastereoselectivity. Mechanistic and computational studies demonstrate that the rate-determining step for methylene C-H arylation is the initial H atom abstraction, whereas the radical ipso cyclization step bears the highest energy barrier for N-methyl functionalization. The relatively lower activation free energies for secondary and tertiary α-amino C-H arylation compared with the functionalization of methylic C-H bond lead to the exceptional site-selectivity.

Iron-Catalyzed Multicomponent C-H Alkylation of in Situ Generated Imines via Photoinduced Ligand-to-Metal Charge Transfer

Herein, we describe a novel photoinduced iron-catalyzed strategy for multicomponent C-H alkylation of in situ generated imines. By utilizing the alkyl radicals generated through iron-mediated photocatalytic C-H activation, the imines formed in situ are further subjected to addition reactions, resulting in the synthesis of various secondary and tertiary amine products. This method is simple to operate and does not require additional oxidants. It is applicable to inert alkane substrates such as cyclic alkanes, cyclic ethers, toluene, and ketones. The reaction is also compatible with various aromatic amines, alkyl amines, halogenated aromatic amines, as well as aromatic aldehydes, alkyl aldehydes, and cinnamaldehyde, among other different types of aldehydes.

Biocatalysis enables the scalable conversion of biobased furans into various furfurylamines

Biobased furans have emerged as chemical building blocks for the development of materials because of their diverse scaffolds and as they can be directly prepared from sugars. However, selective, efficient, and cost-effective scalable conversion of biobased furans remains elusive. Here, we report a robust transaminase (TA) from Shimia marina (SMTA) that enables the scalable amination of biobased furanaldehydes with high activity and broad substrate specificity. Crystallographic and mutagenesis analyses provide mechanistic insights and a structural basis for understanding SMTA, which enables a higher substrate conversion. The enzymatic cascade process established in this study allows one-pot synthesis of 2,5-bis(aminomethyl)furan (BAMF) and 5-(aminomethyl)furan-2-carboxylic acid from 5-hydroxymethylfurfural. The biosynthesis of various furfurylamines, including a one-pot cascade reaction for BAMF generation using whole cells, demonstrates their practical application in the pharmaceutical and polymer industries.

Cooperative Phosphine-Photoredox Catalysis Enables N-H Activation of Azoles for Intermolecular Olefin Hydroamination

Catalytic intermolecular olefin hydroamination is an enabling synthetic strategy that offers direct and atom-economical access to a variety of nitrogen-containing compounds from abundant feedstocks. However, despite numerous advances in catalyst design and reaction development, hydroamination of N-H azoles with unactivated olefins remains an unsolved problem in synthesis. We report a dual phosphine and photoredox catalytic protocol for the hydroamination of numerous structurally diverse and medicinally relevant N-H azoles with unactivated olefins. Hydroamination proceeds with high anti-Markovnikov regioselectivity and N-site selectivity. The mild conditions and high functional group tolerance of the reaction permit the rapid construction of molecular complexity and late-stage functionalization of bioactive compounds. N-H bond activation is proposed to proceed via polar addition of the N-H azole to a phosphine radical cation, followed by P-N α-scission from a phosphoranyl radical intermediate. Reactivity and N-site selectivity are classified by azole N-H BDFE and nitrogen-centered radical spin density, respectively, which can serve as a useful predictive aid in extending the reaction to unseen azoles.

Pyranine Interaction with Amines in Micelles

The fluorescence behavior of pyranine in anionic micellar system of sodium dodecyl sulphate was studied in the presence of selected amines. The amines included cyclopropylamine (CPA), ethylenediamine (EDA), benzylamine (BA), dibutylamine (DBA), cyclohexylamine (CHA), and polyethylenediamine (PEDA). All the studied amines quenched the intensity of pyranine. Study was performed in 0.05 M and 0.1 M SDS. The thermodynamic parameters were determined in order to understand the quenching of pyranine by the studied amines. Change in Gibbs free energy and quenching was found higher in 0.05 M SDS concentration and was found lower when SDS concentration was increased to 0.1 M SDS. Pyranine quenching by the amines studied were treated with an extended Stern-Volmer equation that produced the Stern-Volmer constant ([Formula: see text]). Binding constant (Kb), number of binding stoichiometry (n) and Gibbs free energy change (ΔGbinding) were found higher for lower surfactant concentration as compare to higher surfactant concentration. More negative (-ve) the Gibbs free energies more will be the quenching, higher will be the sensitivity and vice versa. The Gibbs free energies for all the studied amines were found in the order as cyclopropylamine > ethylenediamine > benzylamine > dibutylamine > cyclohexylamine > polyethylenediamine. Fluorescence quenching of pyranine by amines in aqueous SDS is reproducible and is useful for the determination of amines in environmental samples.

Atomically dispersed cobalt catalysts for tandem synthesis of primary benzylamines from oxidized β-O-4 segments

This work presents an innovative approach focusing on fine-tuning the coordination environment of atomically dispersed cobalt catalysts for tandem synthesis of primary benzylamines from oxidized lignin model compounds. By meticulously regulating the Co-N coordination environment, the activity of these catalysts in the hydrogenolysis and reductive amination reactions was effectively controlled. Notably, our study demonstrates that, in contrast to cobalt nanoparticle catalysts, atomically dispersed cobalt catalysts exhibit precise control of the sequence of hydrogenolysis and reductive amination reactions. Particularly, the CoN3 catalyst with a triple Co-N coordination number achieved a remarkable 94% yield in the synthesis of primary benzylamine. To our knowledge, there is no previous documentation of the synthesis of primary benzylamines from lignin dimer model compounds. Our study highlights a promising one-pot route for sustainable production of nitrogen-containing aromatic chemicals from lignin.

"Isocyanates and isocyanides - life-threatening toxins or essential compounds?"

Isocyanides and isocyanates are some of the most reactive compounds in organic chemistry, making them perceived as compounds with high potential for use in both the laboratory and industry. With their high reactivity also comes several disadvantages, most notably their potentially high toxicity. The following article is a collection of information on the toxic effects of the isocyanide group on the human body and the environment. Information on the mechanism of how these harmful substances affect living tissues and the environment, worldwide information on how to protect against these chemicals, current regulations, and exposure limits for specific countries is compiled. The latest research on the application uses of isocyanates and isocyanides is also outlined, as well as the latest safer and greener methods and techniques to work with these compounds. Additionally, the presented article can serve as a brief guide to the organic toxicity of a group of isocyanates and isocyanates.

Recent advances in C(sp3)-N bond formation via metallaphoto-redox catalysis

The C(sp3)-N bond is ubiquitous in natural products, pharmaceuticals, biologically active molecules and functional materials. Consequently, the development of practical and efficient methods for C(sp3)-N bond formation has attracted more and more attention. Compared to the conventional ionic pathway-based thermal methods, photochemical processes that proceed through radical mechanisms by merging photoredox and transition-metal catalyses have emerged as powerful and alternative tools for C(sp3)-N bond formation. In this review, recent advances in the burgeoning field of C(sp3)-N bond formation via metallaphotoredox catalysis have been highlighted. The contents of this review are categorized according to the transition metals used (copper, nickel, cobalt, palladium, and iron) together with photocatalysis. Emphasis is placed on methodology achievements and mechanistic insight, aiming to inspire chemists to invent more efficient radical-involved C(sp3)-N bond-forming reactions.

Unified Approach to Deamination and Deoxygenation Through Isonitrile Hydrodecyanation: A Combined Experimental and Computational Investigation

Herein, we describe a general hydrodefunctionalization protocol of alcohols and amines through a common isonitrile intermediate. To cleave the relatively inert C-NC bond, we leveraged dual hydrogen atom transfer (HAT) and photoredox catalysis to generate a nucleophilic boryl radical, which readily forms an imidoyl radical intermediate from the isonitrile. Rapid β-scission then accomplishes defunctionalization. This method has been applied to the hydrodefunctionalization of both amine and alcohol-containing pharmaceuticals, natural products, and biomolecules. We extended this approach to the reduction of carbonyls and olefins to their saturated counterparts, as well as the hydrodecyanation of alkyl nitriles. Both experimental and computational studies demonstrate a facile β-scission of the imidoyl radical, and reconcile differences in reactivity between nitriles and isonitriles within our protocol.

Two-step synthesis of vicinal trifluoromethyl primary amines from α-(trifluoromethyl)styrenes and phthalimide

A novel two-step synthesis of β-trifluoromethyl primary amines from readily available α-(trifluoromethyl)styrenes and phthalimide is developed. The first step involves a hydroamination between α-(trifluoromethyl)styrenes and phthalimide (PhthNH) with the assistance of a base. Next, the hydrazinolysis of the resulting N-(β-trifluoromethyl-β-arylethyl)phthalimides with hydrazine hydrate affords the desired N-(β-trifluoromethyl-β-arylethyl)amines.

Carbon-Supported Ru-Ni and Ru-W Catalysts for the Transformation of Hydroxyacetone and Saccharides into Glycol-Derived Primary Amines

Nitrogen-containing molecules are used for the synthesis of polymers, surfactants, agrochemicals, and dyes. In the context of green chemistry, it is important to form such compounds from bioresource. Short-chain primary amines are of interest for the polymer industry, like 2-aminopropanol, 1-aminopropan-2-ol, and 1,2-diaminopropane. These amines can be formed through the amination of oxygenated substrates, preferably in aqueous phase. This is possible with heterogeneous catalysts, however, effective systems that allow reactions under mild conditions are lacking. We report an efficient catalyst Ru-Ni/AC for the reductive amination of hydroxyacetone into 2-aminopropanol. The catalyst has been reused during 3 cycles demonstrating a good stability. As a prospective study, extension to the reactivity of (poly)carbohydrates has been realized. Despite a lesser efficiency, 2-aminopropanol (9 % yield of amines) has been formed from fructose, the first example from a carbohydrate. This was possible using a 7.5 %Ru-36 %WxC/AC catalyst, composition allowing a one-pot retro-aldol cleavage into hydroxyacetone and reductive amination. The transformation of cellulose through sequential reactions with a combination of 30 %W2C/AC and 7.5 %Ru-36 %WxC/AC system gave 2 % of 2-aminopropanol, corresponding to the first example of the formation of this amine from cellulose with heterogeneous catalysts.

Highly active and regioselective hydroaminomethylation of olefins catalyzed by Rh/sulfoxantphos with ZSM-5

Rh-catalyzed hydroaminomethylation has been developed with acid sulfoxantphos and ZSM-5. Linear amines were obtained in good yields (71-95%) with high l/b ratios (up to 132.4) and excellent TON values (up to 23 760). The ZSM-5 and SO3H group of ligands improved the performances of hydroformylation and reductive amination.

Selective Ring-Opening Amination of Isochromans and Tetrahydroisoquinolines

The molecular structure-editing through selective C-C bond cleavage allows for the precise modification of molecular structures and opens up new possibilities in chemical synthesis. By strategically cleaving C-C bonds and editing the molecular structure, more efficient and versatile pathways for the synthesis of complex compounds could be designed, which brings significant implications for drug development and materials science. o-Aminophenethyl alcohols and amines are the essential key motifs in bioactive and functional material molecules. The traditional synthesis of these compounds usually requires multiple steps which could generate inseparable isomers and induce low efficiencies. By leveraging a molecular editing strategy, we herein reported a selective ring-opening amination of isochromans and tetrahydroisoquinolines for the efficient synthesis of o-aminophenethyl alcohols and amines. This innovative chemistry allows for the precise cleavage of C-C bonds under mild transition metal-free conditions. Notably, further synthetic application demonstrated that our method could provide an efficient approach to essential components of diverse bioactive molecules.

Sustainable Polymers with High Performance and Infinite Scalability

Our society has been pursuing high-performance biodegradable polymers made from facile methods and readily available monomers. Here, we demonstrate a library of enzyme-degradable polymers with desirable properties from the first reported step polyaddition of diamines, COS, and diacrylates. The polymers contain in-chain ester and thiourethane groups, which can serve as lipase-degradation and hydrogen-bonding physical crosslinking points, respectively, resulting in possible biodegradability as well as upgraded mechanical and thermal properties. Also, the properties of the polymers are scalable due to the versatile method and the wide variety of monomers. We obtain 46 polymers with tunable performance covering high-Tm crystalline plastics, thermoplastic elastomers, and amorphous plastics by regulating polymer structure. Additionally, the polymerization method is highly efficient, atom-economical, quantitatively yield, metal- and even catalyst-free. Overall, the polymers are promising green materials given their degradability, simple and modular synthesis, remarkable and tunable properties, and readily available monomers.

Rh(III)-Catalyzed Diastereo- and Enantioselective Regiodivergent (Hetero)Arylamidation of (Homo)Allylic Sulfides

A rhodium-catalyzed 3-component conjunctive diastereo- and regioselective arylamidation of (homo)allylic sulfides, organon boronic acids, and dioxazolones is reported. These reactions deliver the 1,2-insertion and 2,1-insertion arylamidation products, respectively, for allylic sulfides and homoallylic sulfides. The enantioselective arylamidation of terminal and internal allylic sulfides is achieved, furnishing various 1,3-N,S compounds featuring one or two contiguous stereocenters in high yields and with high diastereo- and enantioselectivities. Mechanistic studies suggest a change in the turnover-limiting and selectivity-determining steps induced by the native and easily removable sulfide group.

Covalent Adaptable Networks with Tailorable Material Properties Based on Divanillin Polyimines

Covalent adaptable networks (CANs) are being developed as future replacements for thermosets as they can retain the high mechanical and chemical robustness inherent to thermosets but also integrate the possibility of reprocessing after material use. Here, covalent adaptable polyimine-based networks were designed with methoxy and allyloxy-substituted divanillin as a core component together with long flexible aliphatic fatty acid-based amines and a short rigid chain triamine, yielding CANs with a high renewable content. The designed series of CANs with reversible imine functionality allowed for fast stress relaxation and tailorability of the thermomechanical properties, as a result of the ratio between long flexible and short rigid amines, with tensile strength (σb) ranging 1.07-18.7 MPa and glass transition temperatures ranging 16-61 °C. The CANs were subsequently successfully reprocessed up to three times without determinantal structure alterations and retained mechanical performance. The CANs were also successfully chemically recycled under acidic conditions, where the starting divanillin monomer was recovered and utilized for the synthesis of a recycled CAN with similar thermal and mechanical properties. This promising class of thermosets bearing sustainable dynamic functionalities opens a window of opportunity for the progressive replacement of fossil-based thermosets.

Benign synthesis of terpene-based 1,4-p-menthane diamine

Terpenes represent a promising renewable feedstock for the substitution of fossil resources in the synthesis of renewable platform chemicals, like diamines. This work describes the synthesis and full characterization of 1,4-p-menthane diamine (1,4-PMD) obtained from α-terpinene (1). A two-step procedure using dibenzyl azodicarboxylate (DBAD) and H2 as rather benign reagents was employed under comparatively mild conditions. Both C-N bonds were formed simultaneously during a visible-light mediated Diels-Alder reaction, which was investigated in batch or flow, avoiding regioselectivity issues during the amination steps that are otherwise typical for terpene chemistry. Heterogeneously catalyzed quadruple hydrogenation of the cycloadduct (2a) yielded 1,4‑PMD (3). While the intermediate cycloadduct was shown to be distillable, the target diamine can be sublimed, offering sustainable purification methods.

Harnessing biocatalysis to achieve selective functional group interconversion of monomers

Polymeric materials are ubiquitous to modern life. However, reliance of petroleum for polymeric building blocks is not sustainable. The synthesis of macromolecules from recalcitrant polymer waste feedstocks, such as plastic waste and lignocellulosic biomass, presents an opportunity to bypass the use of petroleum-based feedstocks. However, the deconstruction and transformation of these alternative feedstocks remained limited until recently. Herein, we highlight examples of monomers liberated from the deconstruction of recalcitrant polymers, and more extensively, we showcase the state-of-the-art in biocatalytic technologies that are enabling synthesis of diverse upcycled monomeric starting materials for a wide variety of macromolecules. Overall, this review emphasizes the importance of functional group interconversion as a promising strategy by which biocatalysis can aid the diversification and upcycling of monomers.

Reversal Effect of Phosphorus on Catalytic Performances of Supported Nickel Catalysts in Reductive Amination of 1,6-Hexanediol

The reductive amination of 1,6-hexanediol with ammonia is one of the most promising green routes for synthesis of 1,6-hexanediamine. Herein, we developed a phosphorous modified Ni catalyst of Ni-P/Al2O3. It presented satisfactory improved selectivity to 1,6-hexanediamine in the reductive amination of 1,6-hexanediol compared to the Ni/Al2O3 catalyst. The phosphorous tended to interact with Al2O3 to form AlPOx species, induced Ni nanoparticle to be flatter, and the decrease of strong acid sites, the new-formed Ni-AlPOx-Al2O3 interface and the flatter Ni nanoparticle were the key to switch the dominating product from hexamethyleneimine to 1,6-hexanediamine. This work develops an efficient catalyst for production of 1,6-hexanediamine from the reductive amination of 1,6-hexanediol, and provides a point of view about designing selective non-noble metal catalysts for producing primary diamines via reductive amination of diols.

A review on vegetable oil-based non isocyanate polyurethane: towards a greener and sustainable production route

The transition from conventional polyurethane (PU) to non isocyanate polyurethane (NIPU) is driven mainly by safety concerns, environmental considerations, and sustainability issues associated with the current PU technology. NIPU has emerged as a promising alternative, addressing limitations related to traditional PU production. There has been increasing interest in bio-based NIPU aligning with the aspiration for green materials and processes. One important biomass resource for the development of bio-based NIPU is vegetable oil, an abundant, renewable, and relatively low cost feedstock. As such, this review aims to provide insight into the progression of NIPU derived from vegetable oils. This article highlights the synthetic and green approach to NIPU production, emphasizing the method involving the polyaddition reaction of cyclic carbonates and amines. The review includes case studies on vegetable oil-based NIPU and perspectives on their properties. Further, discussions on the potential applications and commercial importance of PU and NIPU are included. Finally, we offer perspectives on possible research directions and the future prospects of NIPU, contributing to the ongoing evolution of PU technology.

Formaldehyde-Mediated Hydride Liberation of Alkylamines for Intermolecular Reactions in Hexafluoroisopropanol

The ability of alkylamines to spontaneously liberate hydride ions is typically restrained, except under specific intramolecular reaction settings. Herein, we demonstrate that this reactivity can be unlocked through simple treatment with formaldehyde in hexafluoroisopropanol (HFIP) solvent, thereby enabling various intermolecular hydride transfer reactions of alkylamines under mild conditions. Besides transformations of small molecules, these reactions enable unique late-stage modification of complex peptides. Mechanistic investigations uncover that the key to these intermolecular hydride transfer processes lies in the accommodating conformation of solvent-mediated macrocyclic transition states, where the aggregates of HFIP molecules act as dexterous proton shuttles. Importantly, negative hyperconjugation between the lone electron pair of nitrogen and the antibonding orbital of amine's α C-H bond plays a critical role in the C-H activation, promoting its hydride liberation.

Design of Highly Efficient Electronic Energy Transfer in Functionalized Quantum Dots Driven Specifically by Ethylenediamine

The exploration of emerging functionalized quantum dots (QDs) through modulating the effective interaction between the sensing element and target analyte is of great significance for high-performance trace sensing. Here, the chromone-based ligand grafted QDs (QDs-Chromone) were initiated to realize the electronic energy transfer (EET) driven specifically by ethylenediamine (EDA) in the absence of spectral overlap. The fluorescent and colorimetric dual-mode responses (from red to blue and from colorless to yellow, respectively) resulting from the expanded conjugated ligands reinforced the analytical selectivity, endowing an ultrasensitive and specific response to submicromolar-liquid of EDA. In addition, a QDs-Chromone-based sensing chip was constructed to achieve the ultrasensitive recognition of EDA vapor with a naked-eye observed response at a concentration as low as 10 ppm, as well as a robust anti-interfering ability in complicated scenarios monitoring. We expect the proposed EET strategy in shaping functionalized QDs for high-performance sensing will shine light on both rational probe design methodology and deep sensing mechanism exploration.

Aniline Derivatives from Lignin under Mild Conditions Enabled by Electrochemistry

The development of environmentally friendly methods for the valorization of important phenolic platform chemicals originating directly from lignin-first depolymerization into value-added N-chemicals, such as aniline derivatives, is of high industrial interest. In this work, we tackle this challenging transformation by the judicious combination of electrochemical conversion and chemical functionalization steps. In the first step, lignin-derived para-substituted guaiacols and syringols undergo an atom-efficient, room-temperature anodic oxidation using methanol both as solvent and reagent towards the formation of the corresponding cyclohexadienone derivatives, which are subsequently converted to synthetically challenging ortho-methoxy substituted anilines by reaction with ethyl glycinate hydrochloride under mild conditions. The developed method was applied to crude lignin depolymerization bio-oils, derived from reductive catalytic fractionation (RCF) mediated either by copper-doped porous metal oxide (Cu20 PMO) or Ru/C, allowing the selective production of 4-propanol-2-methoxyaniline (1Gb) and 4-propyl-2-methoxyaniline (2Gb), respectively, from pine lignocellulose. Finally, the application of 2Gb was further studied in the synthesis of carbazole 2Gc, a lignin-derived analogue of biologically active alkaloid murrayafoline A.

Photocatalyzed Amination of Alkyl Halides to Access Primary Amines

We demonstrate that oxime ester derivatives can be used as both a halogen atom transfer (XAT) agent and an imine source under photocatalytic conditions, allowing the radical amination of alkyl halides, resulting in the formation of a broad scope of imines. Hydrolysis of the latter gives direct access to the corresponding primary amines. Mechanistically, the reaction is believed to proceed through the formation of aryl radical intermediates, which are responsible for the activation of alkyl halides via XAT.

Mechanism Study of the Polymerization of Polyamide 56: Reaction Kinetics and Process Parameters

Polyamide 56 (PA56) has gained significant attention in the academic field due to its remarkable mechanical and thermal properties as a highly efficient and versatile biobased material. Its superior moisture absorption property also makes it a unique advantage in the realm of fiber textiles. However, despite extensive investigations on PA56's molecular and aggregate state structure, as well as processing modifications, little attention has been paid to its polymerization mechanism. Herein, the influence of temperature and time on PA56's polycondensation reaction is detailed studied by end-group titration and carbon nuclear magnetic resonance (NMR) techniques. The reaction kinetics equations for the pre-polymerization and vacuum melt-polymerization stages of PA56 are established, and possible side reactions during the polycondensation process are analyzed. By optimizing the reaction process based on kinetic characteristics, PA56 resin with superior comprehensive properties (melting temperature of 252.6 °C, degradation temperature of 371.6 °C, and tensile strength of 75 MPa) is obtained. The findings provide theoretical support for the industrial production of high-quality biobased PA56.

Biotransamination of Furan-Based Aldehydes with Isopropylamine: Enzyme Screening and pH Influence

Furan-based amines are highly valuable compounds which can be directly obtained via reductive amination from easily accessible furfural, 5-(hydroxymethyl)furfural (HMF) and 2,5-diformylfuran (DFF). Herein the biocatalytic amination of these carbonyl derivatives is disclosed using amine transaminases (ATAs) and isopropylamine (IPA) as amine donors. Among the different biocatalysts tested, the ones from Chromobacterium violaceum (Cv-TA), Arthrobacter citreus (ArS-TA), and variants from Arthrobacter sp. (ArRmut11-TA) and Vibrio fluvialis (Vf-mut-TA), afforded high levels of product formation (>80 %) at 100-200 mM aldehyde concentration. The transformations were studied in terms of enzyme and IPA loading. The pH influence was found as a key factor and attributed to the imine/aldehyde equilibrium that can arise from the high reactivity of the carbonyl substrates with a nucleophilic amine such as IPA.

Dual-function transaminases with hybrid nanoflower for the production of value-added chemicals from biobased levulinic acid

The U.S. Department of Energy has listed levulinic acid (LA) as one of the top 12 compounds derived from biomass. LA has gained much attention owing to its conversion into enantiopure 4-aminopentanoic acid through an amination reaction. Herein, we developed a coupled-enzyme recyclable cascade employing two transaminases (TAs) for the synthesis of (S)-4-aminopentanoic acid. TAs were first utilized to convert LA into (S)-4-aminopentanoic acid using (S)-α-Methylbenzylamine [(S)-α-MBA] as an amino donor. The deaminated (S)-α-MBA i.e., acetophenone was recycled back using a second TAs while using isopropyl amine (IPA) amino donor to generate easily removable acetone. Enzymatic reactions were carried out using different systems, with conversions ranging from 30% to 80%. Furthermore, the hybrid nanoflowers (HNF) of the fusion protein were constructed which afforded complete biocatalytic conversion of LA to the desired (S)-4-aminopentanoic acid. The created HNF demonstrated storage stability for over a month and can be reused for up to 7 sequential cycles. A preparative scale reaction (100 mL) achieved the complete conversion with an isolated yield of 62%. Furthermore, the applicability of this recycling system was tested with different β-keto ester substrates, wherein 18%-48% of corresponding β-amino acids were synthesized. Finally, this recycling system was applied for the biosynthesis of pharmaceutical important drug sitagliptin intermediate ((R)-3-amino-4-(2,4,5-triflurophenyl) butanoic acid) with an excellent conversion 82%.

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Electrochemical Late-Stage Functionalization

Late-stage functionalization (LSF) constitutes a powerful strategy for the assembly or diversification of novel molecular entities with improved physicochemical or biological activities. LSF can thus greatly accelerate the development of medicinally relevant compounds, crop protecting agents, and functional materials. Electrochemical molecular synthesis has emerged as an environmentally friendly platform for the transformation of organic compounds. Over the past decade, electrochemical late-stage functionalization (eLSF) has gained major momentum, which is summarized herein up to February 2023.

Synthesis of piperidines and pyridine from furfural over a surface single-atom alloy Ru1CoNP catalyst

The sustainable production of value-added N-heterocycles from available biomass allows to reduce the reliance on fossil resources and creates possibilities for economically and ecologically improved synthesis of fine and bulk chemicals. Herein, we present a unique Ru1CoNP/HAP surface single-atom alloy (SSAA) catalyst, which enables a new type of transformation from the bio-based platform chemical furfural to give N-heterocyclic piperidine. In the presence of NH3 and H2, the desired product is formed under mild conditions with a yield up to 93%. Kinetic studies show that the formation of piperidine proceeds via a series of reaction steps. Initially, in this cascade process, furfural amination to furfurylamine takes place, followed by hydrogenation to tetrahydrofurfurylamine (THFAM) and then ring rearrangement to piperidine. DFT calculations suggest that the Ru1CoNP SSAA structure facilitates the direct ring opening of THFAM resulting in 5-amino-1-pentanol which is quickly converted to piperidine. The value of the presented catalytic strategy is highlighted by the synthesis of an actual drug, alkylated piperidines, and pyridine.

A robust Zintl cluster for the catalytic reduction of pyridines, imines and nitriles

Despite p-block clusters being known for over a century, their application as catalysts to mediate organic transformations is underexplored. Here, the boron functionalized [P7] cluster [(BBN)P7]2- ([1]2-; BBN = 9-borabicyclo[3.3.1]nonane) is applied in the dearomatized reduction of pyridines, as well as the hydroboration of imines and nitriles. These transformations afford amine products, which are important precursors to pharmaceuticals, agrochemicals, and polymers. Catalyst [1]2- has high stability in these reductions: recycling nine times in quinoline hydroboration led to virtually no loss in catalyst performance. The catalyst can also be recycled between two different organic transformations, again with no loss in catalyst competency. The mechanism for pyridine reduction was probed experimentally using variable time normalization analysis, and computationally using density functional theory. This work demonstrates that Zintl clusters can mediate the reduction of nitrogen containing substrates in a transition metal-free manner.

Ammonia surrogates in the synthesis of primary amines

Primary amines are derivatives of ammonia in which one hydrogen atom is replaced by an alkyl or aryl group. Ammonia serves as the primary nitrogen source in amination reactions, and its utilization in solution or as a pure gas has witnessed notable advancements. However, the use of gaseous ammonia remains problematic in academic laboratory settings, while employing aqueous ammonia poses challenges in highly water-sensitive transformations. Consequently, the search for alternative sources of ammonia has garnered considerable attention among the organic chemistry community. This comprehensive literature review focuses on the use of ammonia surrogates in amination reactions, irrespective of the resulting intermediate. The review emphasizes the formation of the C-N bond and underscores the importance of generating intermediate products that can be readily transformed into primary amines through well-established reactions.

A Domino Radical Amidation/Semipinacol Approach to All-Carbon Quaternary Centers Bearing an Aminomethyl Group

A photoredox-mediated radical amidation ring-expansion sequence that enables the generation of all-carbon quaternary centers bearing a protected aminomethyl substituent is described. The methodology can be applied to both styrene and unactivated alkene substrates generating structurally diverse sp3 -rich amine derivatives in a concise manner.

Solventless Amination of Lignin and Natural Phenolics using 2-Oxazolidinone

Reactive amine compounds are critical for a vast array of useful chemicals in society, yet a limited number of them are derived from renewable resources. This study developed an efficient route to obtain aminated building blocks from phenolic resources derived from nature, such as lignin and tannic acid, for enhancing their utility in applications such as epoxy resins, nylons, polyurethanes, and other polymeric materials. The reaction utilized a carbon storage compound, 2-oxazolidinone as a solvent and as a reagent circumventing the need of hazardous chemistry of conventional amination routes such as those involving formaldehyde. Both free acids and hindered phenolics were readily converted into aminoethyl derivatives resulting in aromatics with primary amine functionality. The aminated compounds, with the potential for enhanced reactivity, can pave the way toward more advanced renewable building blocks.

From Lignins to Renewable Aromatic Vitrimers based on Vinylogous Urethane

During the two last decades, covalent adaptable networks (CANs) have proven to be an important new class of polymer materials combining the main advantages of thermoplastics and thermosets. For instance, materials can undergo reprocessing cycles by incorporating dynamic covalent bonds within a cross-linked network. Due to their versatility, renewable resources can be easily integrated into these innovative systems to develop sustainable materials, which can be related to the context of the recent development of a circular bioeconomy. Lignins, the main renewable sources of aromatic structures, are major candidates in the design of novel and biobased stimuli-responsive materials such as vitrimers due to their high functionality and specific chemical architectures. In the aim of developing recyclable lignin-based vinylogous urethane (VU) networks, an innovative strategy was elaborated in which lignin was first modified into liquid polyols and then into polyacetoacetates. Resulting macromonomers were integrated into aromatic VU networks and fully characterized through thermal, mechanical, and rheological experiments. Viscoelastic behaviors of the different aromatic vitrimers exhibited fast stress-relaxations (e. g., 39 s at 130 °C) allowing easy and fast mechanical reprocessing. A thermomechanical recycling study was successfully performed. Then, the developed strategy enabled the fabrication of healable biobased aromatic vitrimers with tunable structures and properties.

The Relationships between the Structure and Properties of PA56 and PA66 and Their Fibers

Bio-based polymers can reduce dependence on nonrenewable petrochemical resources and will be beneficial for future sustainable developments due to their low carbon footprint. In this work, the feasibility of bio-based polyamide 56 (PA56) substituting petroleum-based PA66 is systematically investigated. The crystallization, melting, and decomposition temperature of PA56 were all lower than that of PA66. PA56 formed a γ crystal type with larger grain size and took a longer amount of time to complete the crystallization process since its crystallization rate was lower than that of PA66. Compared with PA66, PA56 exhibited a higher tensile strength of 71.3 ± 1.9 MPa and specific strength of 64.8 ± 2.0 MPa but lower notched impact strength. More importantly, the limited oxygen index and vertical combustion measurement results indicated that the flame retardancy of PA56 was better than PA66, and the LOI values and the UL94 result of PA56 were 27.6% ± 0.9% and V-2. It is worth noting that the PA56 fiber had superior biodegradability compared to the PA66 fiber. PA56 showed significant biodegradation from the eighth week, whereas PA66 remained clean until the sixteenth week (without obvious biodegradation taking place). Eventually, PA56 did not show significant differences compared to PA66 in terms of thermal and mechanical properties. However, PA56 had great advantages in flame retardancy and biodegradability, indicating that the bio-based PA56 could potentially replace petroleum-based PA66 in many fields.

Titanium-Mediated Reduction of Carboxamides to Amines with Borane-Ammonia

In this study, the successful titanium tetrachloride-catalyzed reduction of aldehydes, ketones, carboxylic acids, and nitriles with borane-ammonia was extended to the reduction (deoxygenation) of a variety of aromatic and aliphatic pri-, sec- and tert-carboxamides, by changing the stoichiometry of the catalyst and reductant. The corresponding amines were isolated in good to excellent yields, following a simple acid-base workup.

The Investigation of Copolymer Composition Sequence on Non-Isothermal Crystallization Kinetics of Bio-Based Polyamide 56/512

A new bio-based polyamide 56/512 (PA56/512) has been synthesized with a higher bio-based composition compared to industrialized bio-based PA56, which is considered a lower carbon emission bio-based nylon. In this paper, the one-step approach of copolymerizing PA56 units with PA512 units using melt polymerization has been investigated. The structure of the copolymer PA56/512 was characterized using Fourier-transform infrared spectroscopy (FTIR) and Proton nuclear magnetic resonance (¹H NMR). Other measurement methods, including relative viscosity tests, amine end group measurement, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), were used to analyze the physical and thermal properties of the PA56/512. Furthermore, the non-isothermal crystallization behaviors of PA56/512 have been investigated with the analytical model of Mo's method and the Kissinger method. The melting point of copolymer PA56/512 exhibited a eutectic point at 60 mol% of 512 corresponding to the typical isodimorphism behavior, and the crystallization ability of PA56/512 also displayed a similar tendency.

One-pot terpolymerization of CHO, CO2 and L-lactide using chloride indium catalysts

Ring-opening copolymerization reactions of epoxides, carbon dioxide and cyclic esters to produce copolymers is a promising strategy to prepare CO₂-based polymeric materials. In this contribution, bimetallic chloride indium complexes have been developed as catalysts for the copolymerization processes of cyclohexene oxide, carbon dioxide and L-lactide under mild reaction conditions. The catalysts displayed good catalytic activity and excellent selectivity towards the preparation of poly(cyclohexene carbonate) (PCHC) at one bar CO₂ pressure in the absence of a co-catalyst. Additionally, polyester-polycarbonate copolymers poly(lactide-co-cyclohexene carbonate) (PLA-co-PCHC) were obtained via an one-pot one-step route without the use of a co-catalyst. The degree of incorporation of carbon dioxide can be easily modulated by changing the CO₂ pressure and the monomer feed, resulting in copolymers with different thermal properties.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Recent Advances in the Efficient Synthesis of Useful Amines from Biomass-Based Furan Compounds and Their Derivatives over Heterogeneous Catalysts

Bio-based furanic oxygenates represent a well-known class of lignocellulosic biomass-derived platform molecules. In the presence of H2 and different nitrogen sources, these versatile building blocks can be transformed into valuable amine compounds via reductive amination or hydrogen-borrowing amination mechanisms, yet they still face many challenges due to the co-existence of many side-reactions, such as direct hydrogenation, polymerization and cyclization. Hence, catalysts with specific structures and functions are required to achieve satisfactory yields of target amines. In recent years, heterogeneous catalytic synthesis of amines from bio-based furanic oxygenates has received extensive attention. In this review, we summarize and discuss the recent significant progress in the generation of useful amines from bio-based furanic oxygenates with H2 and different nitrogen sources over heterogeneous catalysts, according to various raw materials and reaction pathways. The key factors affecting catalytic performances, such as active metals, supports, promoters, reaction solvents and conditions, as well as the possible reaction routes and catalytic reaction mechanisms are studied and discussed in depth. Special attention is paid to the structure–activity relationship, which would be helpful for the development of more efficient and stable heterogeneous catalysts. Moreover, the future research direction and development trend of the efficient synthesis for bio-based amines are prospected.

Chitosan modified with bio-extract as an antibacterial coating with UV filtering feature

Benzophenone-3 grafted chitosan (CS-BP-3) was successfully synthesized and applied as an antibacterial coating for the first time. The grafting mechanism is based on the reaction between ketone and primary amine to form imine derivatives and the chemical structure of grafted chitosan was studied by Fourier transform infrared (FT-IR) spectroscopy. Water solubility of BP-3 is enhanced after covalently grafted on chitosan and consequently renders the chitosan coating with UV blocking property. Results of thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) further confirmed the thermal stability of BP-3 modified chitosan is enhanced. The CS-BP-3 coating was applied on a variety of substrates of glass, plastics, wood, and metal. The surface features of the coatings such as morphology, water contact angle (WCA), and surface roughness were investigated. The optical and thermal stabilities of the coatings under UV irradiation were studied for 16 h. Antibacterial activity of CS-BP-3 was evaluated against both Gram-negative and Gram-positive bacteria. And the results of bacterial inhibition by CS-BP-3 coating indicate its potential for future application in food packaging.

Synthesis of Unprotected β-Arylethylamines by Iron(II)-Catalyzed 1,2-Aminoarylation of Alkenes in Hexafluoroisopropanol

β-Arylethylamines are prevalent structural motifs in molecules exhibiting biological activity. Here we report a sequential one-pot protocol for the 1,2-aminoarylation of alkenes with hydroxylammonium triflate salts and (hetero)arenes. Unlike existing methods, this reaction provides a direct entry to unprotected β-arylethylamines with remarkable functional group tolerance, allowing key drug-oriented functional groups to be installed in a two-step process. The use of hexafluoroisopropanol as a solvent in combination with an iron(II) catalyst proved essential to reaching high-value nitrogen-containing molecules.

Synthesis, Curing and Thermal Behavior of Amine Hardeners from Potentially Renewable Sources

Research into bio-based epoxy resins has intensified in recent decades. Here, it is of great importance to use raw materials whose use does not compete with food production. In addition, the performance of the newly developed materials should be comparable to that of conventional products. Possible starting materials are lignin degradation products, such as vanillin and syringaldehyde, for which new synthesis routes to the desired products must be found and their properties determined. In this article, the first synthesis of two amine hardeners, starting with vanillin and syringaldehyde, using the Smiles rearrangement reaction is reported. The amine hardeners were mixed with bisphenol A diglycidyl ether, and the curing was compared to isophorone diamine, 4-4'-diaminodiphenyl sulfone, and 4-Aminonbenzylamine by means of differential scanning calorimetry. It was found that the two amines prepared are cold-curing. As TG-MS studies showed, the thermal stability of at least one of the polymers prepared with the potentially bio-based amines is comparable to that of the polymer prepared with isophorone diamine, and similar degradation products are formed during pyrolysis.

A new transient directing group diethoxyethyl-L-proline facilitates ortho-arylation of aryl-amines/-amino acids via Pd-catalyzed C(sp2)-H activation

Mono-ortho-arylated arylamines are constituents of various natural products but their syntheses are challenging. This report describes a new synthetic methodology for the ortho-arylation of arylamines and α-aromatic amino acids (phenylglycine and phenylalanine) through a Pd-catalyzed C(sp²)-H activation using the synthetic transient directing group diethoxyethyl-L-proline (DEP). A catalytic amount of diethoxyethyl-L-proline is sufficient to form mono-arylated arylamines as the major products using aryliodides. This method could be useful for the synthesis of various biphenyl amines and novel peptidomimetics.

Calcium-catalysed synthesis of amines through imine hydrosilylation: an experimental and theoretical study

A method to reduce aldimines through hydrosilylation is reported. The catalytic system involves calcium triflimide (Ca(NTf₂)₂) and potassium hexafluorophosphate (KPF₆) which have been shown to act in a synergistic manner. The expected amines are obtained in fair to very high yields (40-99%) under mild conditions (room temperature in most cases). To illustrate the potential of this method, a bioactive molecule with antifungal properties was prepared on the gram scale and in high yield in environmentally friendly 2-methyltetrahydrofuran. Moreover, it is shown in this example that the imine can be prepared in situ from the aldehyde and the amine without isolating the imine. The mechanism involved has been explored experimentally and through DFT calculations, and the results are in accordance with an electrophilic activation of the silane by the calcium catalyst.