Iron and Copper Active Sites in Zeolites and Their Correlation to Metalloenzymes

Trapping an Elusive Fe(IV)-Superoxo Intermediate Inside a Self-Assembled Nanocage in Water at Room Temperature

Molecular cavities that mimic natural metalloenzymes have shown the potential to trap elusive reaction intermediates. Here, we demonstrate the formation of a rare yet stable Fe(IV)-superoxo intermediate at room temperature subsequent to dioxygen binding at the Fe(III) site of a (Et4N)2[FeIII(Cl)(bTAML)] complex confined inside the hydrophobic interior of a water-soluble Pd6L412+ nanocage. Using a combination of electron paramagnetic resonance, Mössbauer, Raman/IR vibrational, X-ray absorption, and emission spectroscopies, we demonstrate that the cage-encapsulated complex has a Fe(IV) oxidation state characterized by a stable S = 1/2 spin state and a short Fe-O bond distance of ∼1.70 Å. We find that the O2 reaction in confinement is reversible, while the formed Fe(IV)-superoxo complex readily reacts when presented with substrates having weak C-H bonds, highlighting the lability of the O-O bond. We envision that such optimally trapped high-valent superoxos can show new classes of reactivities catalyzing both oxygen atom transfer and C-H bond activation reactions.

Hydrogen Atom Abstraction and Reduction Study of 21-Thiaporphyrin and 21,23-Dithiaporphyrin

The metal-free porphyrins protonation has gained interest over five decades because its structure modification and hardly monoacid intermediate isolation. Here, upon the hydrogen atom abstraction processes, one step diproptonated H3STTP(BF4)2 (STTP = 5,10,15,20-tetraphenyl-21-thiaporphyrin) (3) and stepwise protonated HS2TTPSbCl6 (5) and diprotonated H2S2TTP(BF4)2 (6) (S2TTP = 5,10,15,20-tetraphenyl-21,23-thiaporphyrin) compounds were obtained using HSTTP and S2TTP with oxidants. The closed-shell protonated compounds were fully characterized using XRD, UV-vis, IR and NMR spectra. In addition, the reduced 19π compounds [K(2,2,2)]HSTTP (2) and [K(2,2,2)]S2TTP (7) were synthesized by the ligands with reductant KC8 in THF solution. These two open-shell compounds were characterized with UV-vis, IR and EPR spectroscopies. The semiempirical ZINDO/S method was employed to analyze the HOMO/LUMO gap lever and identify the electronic transitions of the UV-vis spectra of the closed- and open-shell porphyrin compounds.

Modelling on a Biomimetic [Cu-O-Cu]2+-mediated Methane-to-Methanol Conversion Unveils the Site for Methane Activation

The Cu-O-Cu core exhibits methane-to-methanol conversion, mirroring the reactivity of the copper-containing enzyme pMMO. Herein, we computationally examined the reactivity of a biomimetic Cu-O-Cu core towards methane-to-methanol conversion. The oxygen atom of the Cu-O-Cu core abstracts hydrogen present in the C-H bond of methane. The spin density at the bridging oxygen helps to abstract hydrogen from the C-H bond. We modulated the spin density of the bridging oxygen by substituting only a single copper atom of the Cu-O-Cu core by metals (M) such as Fe, Co, and Ag. These substitutions result in bimetallic [Cu-O-M]2+ models. We observed that the energy barriers for the C-H activation step and the subsequent rebound step vary with the metal M. [Cu-O-Ag]2+ exhibits the highest reactivity for M2M conversion, while [Cu-O-Fe]2+ displays the lowest reactivity. To understand the different reactivity of these models towards M2M conversion, we employed distortion-interaction analysis, orbital analysis, spin density analysis, and quantum theory of atoms in molecules analysis. Orbital analysis reveals that all four adducts follow a hydrogen atom transfer mechanism for C-H activation. Further, spin density analysis reveals that a higher spin density on the bridging oxygen leads to a lower C-H activation barrier.

Exploring the Impact of Active Site Structure on the Conversion of Methane to Methanol in Cu-Exchanged Zeolites

In the past, Cu-oxo or -hydroxy clusters hosted in zeolites have been suggested to enable the selective conversion of methane to methanol, but the impact of the active site's stoichiometry and structure on methanol production is still poorly understood. Herein, we apply theoretical modeling in conjunction with experiments to study the impact of these two factors on partial methane oxidation in the Cu-exchanged zeolite SSZ-13. Phase diagrams developed from first-principles suggest that Cu-hydroxy or Cu-oxo dimers are stabilized when O2 or N2O are used to activate the catalyst, respectively. We confirm these predictions experimentally and determine that in a stepwise conversion process, Cu-oxo dimers can convert twice as much methane to methanol compared to Cu-hydroxyl dimers. Our theoretical models rationalize how Cu-di-oxo dimers can convert up to two methane molecules to methanol, while Cu-di-hydroxyl dimers can convert only one methane molecule to methanol per catalytic cycle. These findings imply that in Cu clusters, at least one oxo group or two hydroxyl groups are needed to convert one methane molecule to methanol per cycle. This simple structure-activity relationship allows to intuitively understand the potential of small oxygenated or hydroxylated transition metal clusters to convert methane to methanol.

Nature and Redox Properties of Iron Sites in Zeolites Revealed by Mössbauer Spectroscopy

Iron-containing zeolite-based catalysts play a pivotal role in environmental processes aimed at mitigating the release of harmful greenhouse gases, such as nitrous oxide (N2O) and methane (CH4). Despite the rich iron chemistry in zeolites, only a fraction of iron species that exhibit an open coordination sphere and possess the ability for electron transfer are responsible for activating reagents. In addition, the splitting of molecular oxygen is facilitated by bare iron cations embedded in zeolitic matrices. Mössbauer spectroscopy is the ideal tool for investigating the valency and geometry of iron species in zeolites because it leaves no iron forms silent and provides insights into in-situ processes. This review is dedicated to the utilization of Mössbauer spectroscopy to elucidate the nature of the extra-framework iron centers in ferrierite (FER), beta-structured (*BEA), and ZSM-5 zeolite (MFI) zeolites, which are active in N2O decomposition and CH4 oxidation through using the active oxygen derived from N2O and O2. In this work, a structured summary of the Mössbauer parameters established over the last two decades is presented, characterizing the specific iron active centers and intermediates formed upon iron's interaction with N2O/O2 and CH4. Additionally, the impact of preparation methods, iron loading, and the long-term stability on iron speciation and its redox behavior under reaction conditions is discussed.

In Situ UV-Vis-NIR Absorption Spectroscopy and Catalysis

This review highlights in situ UV-vis-NIR range absorption spectroscopy in catalysis. A variety of experimental techniques identifying reaction mechanisms, kinetics, and structural properties are discussed. Stopped flow techniques, use of laser pulses, and use of experimental perturbations are demonstrated for in situ studies of enzymatic, homogeneous, heterogeneous, and photocatalysis. They access different time scales and are applicable to different reaction systems and catalyst types. In photocatalysis, femto- and nanosecond resolved measurements through transient absorption are discussed for tracking excited states. UV-vis-NIR absorption spectroscopies for structural characterization are demonstrated especially for Cu and Fe exchanged zeolites and metalloenzymes. This requires combining different spectroscopies. Combining magnetic circular dichroism and resonance Raman spectroscopy is especially powerful. A multitude of phenomena can be tracked on transition metal catalysts on various supports, including changes in oxidation state, adsorptions, reactions, support interactions, surface plasmon resonances, and band gaps. Measurements of oxidation states, oxygen vacancies, and band gaps are shown on heterogeneous catalysts, especially for electrocatalysis. UV-vis-NIR absorption is burdened by broad absorption bands. Advanced analysis techniques enable the tracking of coking reactions on acid zeolites despite convoluted spectra. The value of UV-vis-NIR absorption spectroscopy to catalyst characterization and mechanistic investigation is clear but could be expanded.

Evolution in the Design of Water Oxidation Catalysts with Transition-Metals: A Perspective on Biological, Molecular, Supramolecular, and Hybrid Approaches

Increased demand for a carbon-neutral sustainable energy scheme augmented by climatic threats motivates the design and exploration of novel approaches that reserve intermittent solar energy in the form of chemical bonds in molecules and materials. In this context, inspired by biological processes, artificial photosynthesis has garnered significant attention as a promising solution to convert solar power into chemical fuels from abundantly found H2O. Among the two redox half-reactions in artificial photosynthesis, the four-electron oxidation of water according to 2H2O → O2 + 4H+ + 4e- comprises the major bottleneck and is a severe impediment toward sustainable energy production. As such, devising new catalytic platforms, with traditional concepts of molecular, materials and biological catalysis and capable of integrating the functional architectures of the natural oxygen-evolving complex in photosystem II would certainly be a value-addition toward this objective. In this review, we discuss the progress in construction of ideal water oxidation catalysts (WOCs), starting with the ingenuity of the biological design with earth-abundant transition metal ions, which then diverges into molecular, supramolecular and hybrid approaches, blurring any existing chemical or conceptual boundaries. We focus on the geometric, electronic, and mechanistic understanding of state-of-the-art homogeneous transition-metal containing molecular WOCs and summarize the limiting factors such as choice of ligands and predominance of environmentally unrewarding and expensive noble-metals, necessity of high-valency on metal, thermodynamic instability of intermediates, and reversibility of reactions that create challenges in construction of robust and efficient water oxidation catalyst. We highlight how judicious heterogenization of atom-efficient molecular WOCs in supramolecular and hybrid approaches put forth promising avenues to alleviate the existing problems in molecular catalysis, albeit retaining their fascinating intrinsic reactivities. Taken together, our overview is expected to provide guiding principles on opportunities, challenges, and crucial factors for designing novel water oxidation catalysts based on a synergy between conventional and contemporary methodologies that will incite the expansion of the domain of artificial photosynthesis.

Two Allogons of an O2 -activating Bis(disiloxido)ferrate(II) Accessible Selectively just by Variation of the Crystallization Temperature

Deprotonation of O(iPr2 SiOH)2 (iPr LH2 ) with LiOtBu followed by reaction with FeCl2 in THF led to the complex [iPr L2 Fe][Li(THF)2 ]2 , 2, which represents a structural and spectroscopic model of the α-Fe sites of Fe/ZSM-5. Reaction with O2 in THF solution proceeds rather fast and is complete within 200 ms; an intermediate O2 adduct could not be identified by stopped-flow methods. Cooling blue solutions of 2 to -80 °C led to the growth of blue crystals of 2⋅THF, the analysis of which by XRD revealed a FeO4 core that is somewhat distorted from planarity towards a tetrahedral structure. By contrast, cooling such solutions to -30 °C led to pink crystals of an allogon featuring a perfectly square planar FeO4 entity. Hence, 2 represents a unique case where two different structural isomers (allogons) can be crystallized from the same solvent selectively, controlled by the temperature. DFT calculations were performed to understand this finding.

Spectroscopic and Theoretical Investigation of High-Spin Square-Planar and Trigonal Fe(II) Complexes Supported by Fluorinated Alkoxides

The electronic structures and spectroscopic behavior of three high-spin FeII complexes of fluorinated alkoxides were studied: square-planar {K(DME)2}2[Fe(pinF)2] (S) and quasi square-planar {K(C222)}2[Fe(pinF)2] (S') and trigonal-planar {K(18C6)}[Fe(OC4F9)3] (T) where pinF = perfluoropinacolate and OC4F9 = tris-perfluoro-t-butoxide. The zero-field splitting (ZFS) and hyperfine structure parameters of the S = 2 ground states were determined using field-dependent 57Fe Mössbauer and high-field and -frequency electron paramagnetic resonance (HFEPR) spectroscopies. The spin Hamiltonian parameters were analyzed with crystal field theory and corroborated by density functional theory (DFT) and ab initio complete active space self-consistent field (CASSCF) calculations. Whereas the ZFS tensor of S has a small rhombicity, E/D = 0.082, and a positive D = 15.17 cm-1, T exhibits a negative D = -9.16 cm-1 and a large rhombicity, E/D = 0.246. Computational investigation of the structural factors suggests that the ground-state electronic configuration and geometry of T's Fe site are determined by the interaction of [Fe(OC4F9)3]- with {K(18C6)}+. In contrast, two distinct countercations of S/S' have a negligible influence on their [Fe(pinF)2]2- moieties. Instead, the distortions in S' are likely induced by the chelate ring conformation change from δλ, observed for S, to the δδ conformation, determined for S'.

Competition between Mononuclear and Binuclear Copper Sites across Different Zeolite Topologies

A key challenge for metal-exchanged zeolites is the determination of metal cation speciation and nuclearity under synthesis and reaction conditions. Copper-exchanged zeolites, which are widely used in automotive emissions control and potential catalysts for partial methane oxidation, have in particular evidenced a wide variety of Cu structures that are observed to change with exposure conditions, zeolite composition, and topology. Here, we develop predictive models for Cu cation speciation and nuclearity in CHA, MOR, BEA, AFX, and FER zeolite topologies using interatomic potentials, quantum chemical calculations, and Monte Carlo simulations to interrogate this vast configurational and compositional space. Model predictions are used to rationalize experimentally observed differences between Cu-zeolites in a wide-body of literature, including nuclearity populations, structural variations, and methanol per Cu yields. Our results show that both topological features and commonly observed Al-siting biases in MOR zeolites increase the population of binuclear Cu sites, explaining the small population of mononuclear Cu sites observed in these materials relative to other zeolites such as CHA and BEA. Finally, we used a machine learning classification model to determine the preference to form mononuclear or binuclear Cu sites at different Al configurations in 200 zeolites in the international zeolite database. Model results reveal several zeolite topologies at extreme ends of the mononuclear vs binuclear spectrum, highlighting synthetic options for realization of zeolites with strong Cu nuclearity preferences.

Continuous selective conversion of methane to methanol over a Cu-KFI zeolite catalyst using a water-O2 mixture as the oxygen source

The continuous catalytic oxidation of methane to methanol on a Cu-KFI zeolite using water-O2 mixture as the oxidant is reported. A high methanol space-time yield of 880.3 mmol molCu-1 h-1 with 83% selectivity is achieved at 450 °C. Isotopic labelling experiments show that both H2O and O2 provide the oxygen source in this catalytic methane-to-methanol conversion reaction.

The Role of In Situ/Operando IR Spectroscopy in Unraveling Adsorbate-Induced Structural Changes in Heterogeneous Catalysis

Heterogeneous catalysts undergo thermal- and/or adsorbate-induced dynamic changes under reaction conditions, which consequently modify their catalytic behavior. Hence, it is increasingly crucial to characterize the properties of a catalyst under reaction conditions through the so-called "operando" approach. Operando IR spectroscopy is probably one of the most ubiquitous and versatile characterization methods in the field of heterogeneous catalysis, but its potential in identifying adsorbate- and thermal-induced phenomena is often overlooked in favor of other less accessible methods, such as XAS spectroscopy and high-resolution microscopy. Without detracting from these techniques, and while aware of the enormous value of a multitechnique approach, the purpose of this Review is to show that IR spectroscopy alone can provide relevant information in this field. This is done by discussing a few selected case studies from our own research experience, which belong to the categories of both "single-site"- and nanoparticle-based catalysts.

Ferric Single-Site Catalyst Confined in a Zeolite Framework for Propane Dehydrogenation

Non-oxidative dehydrogenation of propane is a highly efficient approach for industrial preparation of propene that is commonly catalyzed by noble Pt or toxic Cr catalysts and suffers from coking. In this work, ferric catalyst confined in a zeolite framework was synthesized by a hydrothermal procedure. The isolated Fe in the framework formed distorted tetrahedra, which were beneficial for the selective dehydrogenation of propane and reached over 95 % propene selectivity and over 99 % total olefins selectivity. This catalyst had a silanol-free structure and was oxygen tolerant, hydrothermally stable, and coke free, with a deactivation constant of 0.01 h-1 . This study provided guidance for the synthesis of structural heteroatomic zeolite and efficient propane non-oxidative dehydrogenation over early transition metals.

Experimental Evidence and Mechanistic Description of the Phenolic H-Transfer to the Cu2O2 Active Site of oxy-Tyrosinase

Tyrosinase is a ubiquitous coupled binuclear copper enzyme that activates O2 toward the regioselective monooxygenation of monophenols to catechols via a mechanism that remains only partially defined. Here, we present new mechanistic insights into the initial steps of this monooxygenation reaction by employing a pre-steady-state, stopped-flow kinetics approach that allows for the direct measurement of the monooxygenation rates for a series of para-substituted monophenols by oxy-tyrosinase. The obtained biphasic Hammett plot and the associated solvent kinetic isotope effect values provide direct evidence for an initial H-transfer from the protonated phenolic substrate to the Cu2O2 core of oxy-tyrosinase. The correlation of these experimental results to quantum mechanics/molecular mechanics calculations provides a detailed mechanistic description of this H-transfer step. These new mechanistic insights revise and expand our fundamental understanding of Cu2O2 active sites in biology.

Bioinspired microenvironment modulation of metal-organic framework-based catalysts for selective methane oxidation

Inspiration from natural enzymes enabling creationary catalyst design is appealing yet remains extremely challenging for selective methane (CH4) oxidation. This study presents the construction of a biomimetic catalyst platform for CH4 oxidation, which is constructed by incorporating Fe-porphyrin into a robust metal-organic framework, UiO-66, furnished with saturated monocarboxylic fatty acid bearing different long alkyl chains. The catalysts demonstrate the high efficiency in the CH4 to methanol (CH3OH) conversion at 50 °C. Moreover, the selectivity to CH3OH can be effectively regulated and promoted through a fine-tuned microenvironment by hydrophobic modification around the Fe-porphyrin. The long-chain fatty acids anchored on the Zr-oxo cluster of UiO-66 can not only tune the electronic state of the Fe sites to improve CH4 adsorption, but also restrict the amount of H2O2 around the Fe sites to reduce the overoxidation. This behavior resembles the microenvironment regulation in methane monooxygenase, resulting in high CH3OH selectivity.

Theoretical Perspective of Promoting Direct Methane-to-Methanol Conversion at Complex Metal Oxide-Metal Interfaces

Direct methane conversion to methanol has been considered as an effective and economic way to address greenhouse effects and the current high demand for methanol in industry. However, the process has long been challenging due to lack of viable catalysts to compromise the activation of methane that typically occurs at high temperatures and retaining of produced methanol that requires mild conditions. This Perspective demonstrates an effective strategy to promote direct methane to methanol conversion by engineering the active sites and chemical environments at complex metal oxide - copper oxide - copper interfaces. Such effort strongly depends on extensive theoretical studies by combining density functional theory (DFT) calculations and kinetic Monte Carlo (KMC) simulations to provide in-depth understanding of reaction mechanism and active sites, which build a strong basis to enable the identification of design principles and advance the catalyst optimization for selective CH₄-to-CH₃OH conversion.

Zeolite-encaged mononuclear copper centers catalyze CO2 selective hydrogenation to methanol

The selective hydrogenation of CO2 to methanol by renewable hydrogen source represents an attractive route for CO2 recycling and is carbon neutral. Stable catalysts with high activity and methanol selectivity are being vigorously pursued, and current debates on the active site and reaction pathway need to be clarified. Here, we report a design of faujasite-encaged mononuclear Cu centers, namely Cu@FAU, for this challenging reaction. Stable methanol space-time-yield (STY) of 12.8 mmol gcat-1 h-1 and methanol selectivity of 89.5% are simultaneously achieved at a relatively low reaction temperature of 513 K, making Cu@FAU a potential methanol synthesis catalyst from CO2 hydrogenation. With zeolite-encaged mononuclear Cu centers as the destined active sites, the unique reaction pathway of stepwise CO2 hydrogenation over Cu@FAU is illustrated. This work provides a clear example of catalytic reaction with explicit structure-activity relationship and highlights the power of zeolite catalysis in complex chemical transformations.

Computational Discovery of Stable Metal-Organic Frameworks for Methane-to-Methanol Catalysis

The challenge of direct partial oxidation of methane to methanol has motivated the targeted search of metal-organic frameworks (MOFs) as a promising class of materials for this transformation because of their site-isolated metals with tunable ligand environments. Thousands of MOFs have been synthesized, yet relatively few have been screened for their promise in methane conversion. We developed a high-throughput virtual screening workflow that identifies MOFs from a diverse space of experimental MOFs that have not been studied for catalysis, yet are thermally stable, synthesizable, and have promising unsaturated metal sites for C-H activation via a terminal metal-oxo species. We carried out density functional theory calculations of the radical rebound mechanism for methane-to-methanol conversion on models of the secondary building units (SBUs) from 87 selected MOFs. While we showed that oxo formation favorability decreases with increasing 3d filling, consistent with prior work, previously observed scaling relations between oxo formation and hydrogen atom transfer (HAT) are disrupted by the greater diversity in our MOF set. Accordingly, we focused on Mn MOFs, which favor oxo intermediates without disfavoring HAT or leading to high methanol release energies─a key feature for methane hydroxylation activity. We identified three Mn MOFs comprising unsaturated Mn centers bound to weak-field carboxylate ligands in planar or bent geometries with promising methane-to-methanol kinetics and thermodynamics. The energetic spans of these MOFs are indicative of promising turnover frequencies for methane to methanol that warrant further experimental catalytic studies.

The Pseudomonas aeruginosa PAO1 metallo flavoprotein d-2-hydroxyglutarate dehydrogenase requires Zn2+ for substrate orientation and activation

Pseudomonas aeruginosa PAO1 d-2-hydroxyglutarate (D2HG) dehydrogenase (PaD2HGDH) oxidizes D2HG to 2-ketoglutarate during the vital l-serine biosynthesis and is a potential therapeutic target against P. aeruginosa. PaD2HGDH, which oxidizes d-malate as an alternative substrate, has been demonstrated to be a metallo flavoprotein that requires Zn2+ for activity. However, the role of Zn2+ in the enzyme has not been elucidated, making it difficult to rationalize why nature employs both a redox center and a metal ion for catalysis in PaD2HGDH and other metallo flavoenzymes. In this study, recombinant His-tagged PaD2HGDH was purified to high levels in the presence of Zn2+ or Co2+ to investigate the metal's role in catalysis. We found that the flavin reduction step was reversible and partially rate limiting for the enzyme's turnover at pH 7.4 with either D2HG or d-malate with similar rate constants for both substrates, irrespective of whether Zn2+ or Co2+ was bound to the enzyme. The steady-state pL profiles of the kcat and kcat/Km values with d-malate demonstrate that Zn2+ mediates the activation of water coordinated to the metal. Our data are consistent with a dual role for the metal, which orients the hydroxy acid substrate in the enzyme's active site and rapidly deprotonates the substrate to yield an alkoxide species for hydride transfer to the flavin. Thus, we propose a catalytic mechanism for PaD2HGDH oxidation that establishes Zn2+ as a cofactor required for substrate orientation and activation during enzymatic turnover.

Transition metal oxide complexes as molecular catalysts for selective methane to methanol transformation: any prospects or time to retire?

Transition metal oxides have been extensively used in the literature for the conversion of methane to methanol. Despite the progress made over the past decades, no method with satisfactory performance or economic viability has been detected. The main bottleneck is that the produced methanol oxidizes further due to its weaker C-H bond than that of methane. Every improvement in the efficiency of a catalyst to activate methane leads to reduction of the selectivity towards methanol. Is it therefore prudent to keep studying (both theoretically and experimentally) metal oxides as catalysts for the quantitative conversion of methane to methanol? This perspective focuses on molecular metal oxide complexes and suggests strategies to bypass the current bottlenecks with higher weight on the computational chemistry side. We first discuss the electronic structure of metal oxides, followed by assessing the role of the ligands in the reactivity of the catalysts. For better selectivity, we propose that metal oxide anionic complexes should be explored further, while hydrophylic cavities in the vicinity of the metal oxide can perturb the transition-state structure for methanol increasing appreciably the activation barrier for methanol. We also emphasize that computational studies should target the activation reaction of methanol (and not only methane), the study of complete catalytic cycles (including the recombination and oxidation steps), and the use of molecular oxygen as an oxidant. The titled chemical conversion is an excellent challenge for theory and we believe that computational studies should lead the field in the future. It is finally shown that bottom-up approaches offer a systematic way for exploration of the chemical space and should still be applied in parallel with the recently popular machine learning techniques. To answer the question of the title, we believe that metal oxides should still be considered provided that we change our focus and perform more systematic investigations on the activation of methanol.

Enzyme-Inspired Coordination Polymers for Selective Oxidization of C(sp3)-H Bonds via Multiphoton Excitation

Nature's blueprint provides the fundamental principles for expanding the use of abundant metals in catalysis; however, mimicking both the structure and function of copper enzymes simultaneously in one artificial system for selective C-H bond oxidation faces marked challenges. Herein, we report a new approach to the assembly of artificial monooxygenases utilizing a binuclear Cu₂S₂Cl₂ cluster to duplicate the identical structure and catalysis of the Cu_A enzyme. The designed monooxygenase Cu-Cl-bpyc facilitates well-defined redox potential that initially activated O₂via photoinduced electron transfer, and generated an active chlorine radical via a ligand-to-metal charge transfer (LMCT) process from the consecutive excitation of the in situ formed copper(II) center. The chlorine radical abstracts a hydrogen atom selectively from C(sp³)-H bonds to generate the radical intermediate; meanwhile, the O₂^•- species interacted with the mimic to form mixed-valence species, giving the desired oxidization products with inherent product selectivity of copper monooxygenases and recovering the catalyst directly. This enzymatic protocol exhibits excellent recyclability, good functional group tolerance, and broad substrate scope, including some biological and pharmacologically relevant targets. Mechanistic studies indicate that the C-H bond cleavage was the rate-determining step and the cuprous interactions were essential to stabilize the active oxygen species. The well-defined structural characters and the fine-modified catalytic properties open a new avenue to develop robust artificial enzymes with uniform and precise active sites and high catalytic performances.

Influence of the zeolite support on the catalytic properties of confined metal clusters: a periodic DFT study of O2 dissociation on Cun clusters in CHA

The catalytic properties of sub-nanometer Cu_n clusters are modified by interactions with inorganic supports used for their stabilization. In this work, the reactivity towards O₂ dissociation of Cu₅ and Cu₇ clusters confined within the cavities of the CHA zeolite is theoretically investigated by means of periodic DFT calculations. Increasing the Al content in the zeolite framework not only modifies the cluster morphology, but also leads to a decrease in the electronic density available on the supported Cu_n clusters, which in turn leads to higher activation energies for O₂ dissociation. Together with the cluster size and shape, the Si/Al ratio in the zeolite support appears as a potential parameter to finely tune the stability and oxidation properties of Cu-based catalysts.

Methane Oxidation to Methanol

The direct transformation of methane to methanol remains a significant challenge for operation at a larger scale. Central to this challenge is the low reactivity of methane at conditions that can facilitate product recovery. This review discusses the issue through examination of several promising routes to methanol and an evaluation of performance targets that are required to develop the process at scale. We explore the methods currently used, the emergence of active heterogeneous catalysts and their design and reaction mechanisms and provide a critical perspective on future operation. Initial experiments are discussed where identification of gas phase radical chemistry limited further development by this approach. Subsequently, a new class of catalytic materials based on natural systems such as iron or copper containing zeolites were explored at milder conditions. The key issues of these technologies are low methane conversion and often significant overoxidation of products. Despite this, interest remains high in this reaction and the wider appeal of an effective route to key products from C-H activation, particularly with the need to transition to net carbon zero with new routes from renewable methane sources is exciting.

Effects of Cu Species on Liquid-Phase Partial Oxidation of Methane with H2O2 over Cu-Fe/ZSM-5 Catalysts

In this study, a Cu-promoted Fe/ZSM-5 catalyst was examined to reveal the effects of Cu species in selective oxidation of methane into methane oxygenates using H2O2 in water. Cu/ZSM-5, Cu-Fe/ZSM-5, and Fe/ZSM-5 catalysts were prepared using wet impregnation, solid-state ion exchange, and ion-exchange methods. Various techniques, including nitrogen physisorption, temperature-programmed reduction with H2, UV-vis spectroscopy, and FT-IR spectroscopy after NO adsorption, were utilized to characterize the catalysts. The promotional effect of Cu on the Cu-Fe/ZSM-5 catalyst in terms of methanol selectivity was confirmed. The preparation method has a considerable influence on the catalyst performance, and the ion-exchange method is the most effective. However, leaching of the Cu species was observed during this reaction, which can affect the quantification of formic acid by 1H-NMR. The homogeneous Cu species increase hydrogen peroxide decomposition and CO2 selectivity, which is undesirable for this reaction.

Methane Activation by a Mononuclear Copper Active Site in the Zeolite Mordenite: Effect of Metal Nuclearity on Reactivity

The direct conversion of methane to methanol would have a wide reaching environmental and industrial impact. Copper-containing zeolites can perform this reaction at low temperatures and pressures at a previously defined O₂-activated [Cu₂O]²⁺ site. However, after autoreduction of the copper-containing zeolite mordenite and removal of the [Cu₂O]²⁺ active site, the zeolite is still methane reactive. In this study, we use diffuse reflectance UV-vis spectroscopy, magnetic circular dichroism, resonance Raman spectroscopy, electron paramagnetic resonance, and X-ray absorption spectroscopy to unambiguously define a mononuclear [CuOH]⁺ as the CH₄ reactive active site of the autoreduced zeolite. The rigorous identification of a mononuclear active site allows a reactivity comparison to the previously defined [Cu₂O]²⁺ active site. We perform kinetic experiments to compare the reactivity of the [CuOH]⁺ and [Cu₂O]²⁺ sites and find that the binuclear site is significantly more reactive. From the analysis of density functional theory calculations, we elucidate that this increased reactivity is a direct result of stabilization of the [Cu₂OH]²⁺ H-atom abstraction product by electron delocalization over the two Cu cations via the bridging ligand. This significant increase in reactivity from electron delocalization over a binuclear active site provides new insights for the design of highly reactive oxidative catalysts.

Computational Evaluation of Potential Molecular Catalysts for Nitrous Oxide Decomposition

Nitrous oxide (N₂O) is a potent greenhouse gas (GHG) with limited use as a mild anesthetic and underdeveloped reactivity. Nitrous oxide splitting (decomposition) is critical to its mitigation as a GHG. Although heterogeneous catalysts for N₂O decomposition have been developed, highly efficient, long-lived solid catalysts are still needed, and the details of the catalytic pathways are not well understood. Reported herein is a computational evaluation of three potential molecular (homogeneous) catalysts for N₂O splitting, which could aid in the development of more active and robust catalysts and provide deeper mechanistic insights: one Cu(I)-based, [(CF₃O)₄Al]Cu (A-1), and two Ru(III)-based, Cl(POR)Ru (B-1) and (NTA)Ru (C-1) (POR = porphyrin, NTA = nitrilotriacetate). The structures and energetic viability of potential intermediates and key transition states are evaluated according to a two-stage reaction pathway: (A) deoxygenation (DO), during which a metal-N₂O complex undergoes N-O bond cleavage to produce N₂ and a metal-oxo species and (B) (di)oxygen evolution (OER), in which the metal-oxo species dimerizes to a dimetal-peroxo complex, followed by conversion to a metal-dioxygen species from which dioxygen dissociates. For the (F-L)Cu(I) activator (A-1), deoxygenation of N₂O is facilitated by an O-bound (F-L)Cu-O-N₂ or better by a bimetallic N,O-bonded, (F-L)Cu-NNO-Cu(F-L) complex; the resulting copper-oxyl (F-L)Cu-O is converted exergonically to (F-L)Cu-(η²,η²-O₂)-Cu(F-L), which leads to dioxygen species (F-L)Cu(η²-O₂), that favorably dissociates O₂. Key features of the DO/OER process for (POR)ClRu (B-1) include endergonic N₂O coordination, facile N₂ evolution from LR'u-N₂O-RuL to Cl(POR)RuO, moderate barrier coupling of Cl(POR)RuO to peroxo Cl(POR)Ru(O₂)Ru(POR)Cl, and eventual O₂ dissociation from Cl(POR)Ru(η¹-O₂), which is nearly thermoneutral. N₂O decomposition promoted by (NTA)Ru(III) (C-1) can proceed with exergonic N₂O coordination, facile N₂ dissociation from (NTA)Ru-ON₂ or (NTA)Ru-N₂O-Ru(NTA) to form (NTA)Ru-O; dimerization of the (NTA)Ru-oxo species is facile to produce (NTA)Ru-O-O-Ru(NTA), and subsequent OE from the peroxo species is moderately endergonic. Considering the overall energetics, (F-L)Cu and Cl(POR)Ru derivatives are deemed the best candidates for promoting facile N₂O decomposition.

Elucidation of the tyrosinase/O2/monophenol ternary intermediate that dictates the monooxygenation mechanism in melanin biosynthesis

Melanins are highly conjugated biopolymer pigments that provide photoprotection in a wide array of organisms, from bacteria to humans. The rate-limiting step in melanin biosynthesis, which is the ortho-hydroxylation of the amino acid L-tyrosine to L-DOPA, is catalyzed by the ubiquitous enzyme tyrosinase (Ty). Ty contains a coupled binuclear copper active site that binds O2 to form a μ:η2:η2-peroxide dicopper(II) intermediate (oxy-Ty), capable of performing the regioselective monooxygenation of para-substituted monophenols to catechols. The mechanism of this critical monooxygenation reaction remains poorly understood despite extensive efforts. In this study, we have employed a combination of spectroscopic, kinetic, and computational methods to trap and characterize the elusive catalytic ternary intermediate (Ty/O2/monophenol) under single-turnover conditions and obtain molecular-level mechanistic insights into its monooxygenation reactivity. Our experimental results, coupled with quantum-mechanics/molecular-mechanics calculations, reveal that the monophenol substrate docks in the active-site pocket of oxy-Ty fully protonated, without coordination to a copper or cleavage of the μ:η2:η2-peroxide O-O bond. Formation of this ternary intermediate involves the displacement of active-site water molecules by the substrate and replacement of their H bonds to the μ:η2:η2-peroxide by a single H bond from the substrate hydroxyl group. This H-bonding interaction in the ternary intermediate enables the unprecedented monooxygenation mechanism, where the μ-η2:η2-peroxide O-O bond is cleaved to accept the phenolic proton, followed by substrate phenolate coordination to a copper site concomitant with its aromatic ortho-hydroxylation by the nonprotonated μ-oxo. This study provides insights into O2 activation and reactivity by coupled binuclear copper active sites with fundamental implications in biocatalysis.

Sub-nanometer Copper Clusters as Alternative Catalysts for the Selective Oxidation of Methane to Methanol with Molecular O2

The partial oxidation of methane to methanol with molecular O₂ at mild reaction conditions is a challenging process, which is efficiently catalyzed in nature by enzymes. As an alternative to the extensively studied Cu-exchanged zeolites, small copper clusters composed by just a few atoms appear as potential specific catalysts for this transformation. Following previous work in our group that established that the reactivity of oxygen atoms adsorbed on copper clusters is closely linked to cluster size and morphology, we explore by means of DFT calculations the ability of bidimensional (2D) and three-dimensional (3D) Cu₅ and Cu₇ clusters to oxidize partially methane to methanol. A highly selective Eley-Rideal pathway involving homolytic C-H bond dissociation and a non-adsorbed radical-like methyl intermediate is favored when bicoordinated oxygen atoms, preferentially stabilized at the edges of 2D clusters, are available. Cluster morphology arises as a key parameter determining the nature and reactivity of adsorbed oxygen atoms, opening the possibility to design efficient catalysts for partial methane oxidation based on copper clusters.

The chameleon-like nature of elusive cobalt-oxygen intermediates in C-H bond activation reactions

High-valence metal-oxo (M-O, M = Fe, Mn, etc.) species are well-known reaction intermediates that are responsible for a wide range of pivotal oxygenation reactions and water oxidation reactions in metalloenzymes. Although extensive efforts have been devoted to synthesizing and identifying such complexes in biomimetic studies, the structure-function relationship and related reaction mechanisms of these reaction intermediates remain elusive, especially for the cobalt-oxygen species. In the present manuscript, the calculated results demonstrate that the tetraamido macrocycle ligated cobalt complex, Co(O)(TAML) (1), behaves like a chameleon: the electronic structure varies from a cobalt(III)-oxyl species to a cobalt(IV)-oxo species when a Lewis acid Sc³⁺ salt coordinates or an acidic hydrocarbon attacks 1. The dichotomous correlation between the reaction rates of C-H bond activation by 1 and the bond dissociation energy (BDE) vs. the acidity (pK_a) was rationalized for the first time by different reaction mechanisms: for normal C-H bond activation, the Co(III)-oxyl species directly activates the C-H bond via a hydrogen atom transfer (HAT) mechanism, whereas for acidic C-H bond activation, the Co(III)-oxyl species evolves to a Co(IV)-oxo species to increase the basicity of the oxygen to activate the acidic C-H bond, via a novel PCET(PT) mechanism (proton-coupled electron transfer with a PT(proton-transfer)-like transition state). These theoretical findings will enrich the knowledge of biomimetic metal-oxygen chemistry.

Gas-Phase Selective Oxidation of Methane into Methane Oxygenates

Methane is an abundant resource and its direct conversion into value-added chemicals has been an attractive subject for its efficient utilization. This method can be more efficient than the present energy-intensive indirect conversion of methane via syngas, a mixture of CO and H2. Among the various approaches for direct methane conversion, the selective oxidation of methane into methane oxygenates (e.g., methanol and formaldehyde) is particularly promising because it can proceed at low temperatures. Nevertheless, due to low product yields this method is challenging. Compared with the liquid-phase partial oxidation of methane, which frequently demands for strong oxidizing agents in protic solvents, gas-phase selective methane oxidation has some merits, such as the possibility of using oxygen as an oxidant and the ease of scale-up owing to the use of heterogeneous catalysts. Herein, we summarize recent advances in the gas-phase partial oxidation of methane into methane oxygenates, focusing mainly on its conversion into formaldehyde and methanol.

Direct Propylene Epoxidation with Molecular Oxygen over Cobalt-Containing Zeolites

Direct propylene epoxidation with molecular oxygen is a dream reaction with 100% atom economy, but aerobic epoxidation is challenging because of the undesired over-oxidation and isomerization of epoxide products. Herein, we report the construction of uniform cobalt ions confined in faujasite zeolite, namely, Co@Y, which exhibits unprecedented catalytic performance in the aerobic epoxidation of propylene. Propylene conversion of 24.6% is achieved at propylene oxide selectivity of 57% at 773 K, giving a state-of-the-art propylene oxide production rate of 4.7 mmol/g_cat/h. The catalytic performance of Co@Y is very stable, and no activity loss can be observed for over 200 h. Spectroscopic analyses reveal the details of molecular oxygen activation on isolated cobalt ions, followed by interaction with propylene to produce epoxide, in which the Co²⁺-Co^δ+-Co²⁺ (2 < δ < 3) redox cycle is involved. The reaction pathway of propylene oxide and byproduct acrolein formation from propylene epoxidation is investigated by density functional theory calculations, and the unique catalytic performance of Co@Y is interpreted. This work presents an explicit example of constructing specific transition-metal ions within the zeolite matrix toward selective catalytic oxidations.