Asymmetric Catalysis Using Chiral Salen-Metal Complexes: Recent Advances

Chiral cadmium-amine complexes for stimulating non-linear optical activity and photoluminescence in solids based on aurophilic stacks

The design of high-performance optical materials can be realized using coordination polymers (CPs) often supported by non-covalent interactions, such as metallophilicity. The challenge is to control two or more optical effects, e.g., non-linear optics (NLO) and photoluminescence (PL). We present a new strategy for the combination of the NLO effect of second-harmonic generation (SHG) and the visible PL achieved by linking dicyanidoaurate(i) ions, which form luminescent metallophilic stacks, with cadmium(ii) complexes bearing chiral amine ligands, used to break the crystal's symmetry. We report a family of NLO- and PL-active materials based on heterometallic Cd(ii)-Au(i) coordination systems incorporating enantiopure propane-1,2-diamine (pda) ligands (1-S, 1-R), their racemate (2), and enantiopure trans-cyclopentane-1,2-diamine (cpda) ligands (3-S, 3-R). Due to acentric space groups, they exhibit the SHG signal, tunable within the range of 11-24% of the KDP reference, which was correlated with the dipole moments of Cd(ii) units. They show efficient blue PL whose energy and quantum yield, the latter ranging from 0.40 to 0.83, are controlled by Cd(ii) complexes affecting the Au-Au distances and vibrational modes. We prove that chiral Cd(ii)-amine complexes play the role of molecular agents for the stimulation of both the NLO and PL of the materials based on aurophilic stacks.

Covalent Organic Frameworks for Photocatalytic Reduction of Carbon Dioxide: A Review

Covalent organic frameworks (COFs) are crystalline networks with extended backbones cross-linked by covalent bonds. Due to the semiconductive properties and variable metal coordinating sites, along with the rapid development in linkage chemistry, the utilization of COFs in photocatalytic CO2RR has attracted many scientists' interests. In this Review, we summarize the latest research progress on variable COFs for photocatalytic CO2 reduction. In the first part, we present the development of COF linkages that have been used in CO2RR, and we discuss four mechanisms including COFs as intrinsic photocatalysts, COFs with photosensitive motifs as photocatalysts, metalated COF photocatalysts, and COFs with semiconductors as heterojunction photocatalysts. Then, we summarize the principles of structural designs including functional building units and stacking mode exchange. Finally, the outlook and challenges have been provided. This Review is intended to give some guidance on the design and synthesis of diverse COFs with different linkages, various structures, and divergent stacking modes for the efficient photoreduction of CO2.

Construction of chlorogenic acid nanoparticles for effective alleviation of ulcerative colitis

The onset and progression of ulcerative colitis (UC) are intricately linked to the worsening of intestinal inflammation, an imbalance in oxidative stress, and impairment of the intestinal mucosal barrier. Although chlorogenic acid (CA) shows potential in effectively alleviating the symptoms of UC, its clinical application is hindered by its poor bioavailability, stability, rapid metabolism, and quick excretion. This study utilized a one-step enzyme-catalyzed polymerization technique to create chlorogenic acid nanoparticles (CA NPs), aiming to improve the bioavailability and stability of CA. The CA NPs exhibited an optimal nanosize (106.65 ± 4.12 nm) and showed increased cellular uptake over time. Importantly, CA NPs significantly prolonged retention time in inflamed colonic tissues, enhancing accumulation and providing a targeted therapy for UC. Animal studies confirmed the substantial benefits of CA NPs, including reduced weight loss, lessened reduction in colon length, and a lowered disease activity index (DAI) score in DSS-induced UC mice. Moreover, CA NPs effectively reduced oxidative stress and levels of inflammatory factors in the colonic tissues of UC mice, thus mitigating tissue damage and restoring the integrity of the intestinal mucosal barrier. In conclusion, our research proposes a novel approach to increase the bioavailability and stability of CA, offering a promising avenue for its effective application in preventing UC.

All-visible-light-driven salicylidene schiff-base-functionalized artificial molecular motors

Light-driven rotary molecular motors are among the most promising classes of responsive molecular machines and take advantage of their intrinsic chirality which governs unidirectional rotation. As a consequence of their dynamic function, they receive considerable interest in the areas of supramolecular chemistry, asymmetric catalysis and responsive materials. Among the emerging classes of responsive photochromic molecules, multistate first-generation molecular motors driven by benign visible light remain unexplored, which limits the exploitation of the full potential of these mechanical light-powered systems. Herein, we describe a series of all-visible-light-driven first-generation molecular motors based on the salicylidene Schiff base functionality. Remarkable redshifts up to 100 nm in absorption are achieved compared to conventional first-generation motor structures. Taking advantage of all-visible-light-driven multistate motor scaffolds, adaptive behaviour is found as well, and potential application in multistate photoluminescence is demonstrated. These functional visible-light-responsive motors will likely stimulate the design and synthesis of more sophisticated nanomachinery with a myriad of future applications in powering dynamic systems.

Synthetic and Mechanistic Studies into the Reductive Functionalization of Nitro Compounds Catalyzed by an Iron(salen) Complex

We report on the use of a simple, bench-stable [Fe(salen)2]-μ-oxo precatalyst in the reduction of nitro compounds. The reaction proceeds at room temperature across a range of substrates, including nitro aromatics and aliphatics. By changing the reducing agent from pinacol borane (HBpin) to phenyl silane (H3SiPh), we can chemoselectively reduce nitro compounds while retaining carbonyl functionality. Our mechanistic studies, which include kinetics, electron paramagnetic resonance (EPR), mass spectrometry, and quantum chemistry, indicate the presence of a nitroso intermediate and the generation of an on-cycle iron hydride as a key catalytic intermediate. Based on this mechanistic insight, we were able to extend the chemistry to hydroamination and identified a simple substrate feature (alkene lowest unoccupied molecular orbital (LUMO) energy) that could be used to predict which alkenes would result in productive catalysis.

Complex isomerism influencing the textural properties of organometallic [Cu(salen)] porous polymers: paramagnetic solid-state NMR characterization and heterogeneous catalysis

Although organometallic porous polymer networks are recognized as promising heterogeneous catalysts, the relationship between ligand/monomer geometry and network parameters is usually not well understood due to the lack of atom-resolved characterization methods for the amorphous network matrix. In this work, a series of copper(II) salen-type metal complexes was synthesized, using trans- and cis-1,2-diaminocyclohexane segments, and thoroughly characterized by single-crystal X-ray diffraction and solution- and solid-state NMR spectroscopy. Terminal ethynyl groups of the complexes were then transformed into polyacetylene chains by coordination chain-growth homopolymerization, resulting in highly porous (458-655 m2 g-1) organometallic polymer networks with a copper(II) ion content of about 12 wt%. The presence of paramagnetic copper(II) moieties in these complexes and respective polymer networks required the application of tailored NMR techniques, which together with X-ray crystallography and DFT calculations of the paramagnetic NMR shifts made it possible to investigate the differences in the complex geometry in liquid, powder and crystalline form and compare it with the complex geometry in polymer networks. All prepared organometallic polymer networks were also tested as heterogeneous catalysts for styrene oxidation with uncommonly high substrate conversions and compared with their low-molecular-weight analogues. The high reusability of such heterogeneous polymer-based catalysts was also proven.

Crystalline Olefin-Linked Chiral Covalent Organic Frameworks as a Platform for Asymmetric Catalysis

The construction of olefin-linked chiral covalent organic frameworks (COFs) with high crystallinity is highly desirable while remains great challenge due to the poor reversibility of the formation reaction for the olefin linkages during the in situ structural self-healing process. Herein, we successfully synthesized two sets of enantiomeric olefin-linked COFs. The chiral catalytic groups are uniformly distributed on the pore walls of COFs, resulting in the full exposure of catalytic sites to the reactants in asymmetric catalysis. The as-prepared (R)/(S)-CCOF8 exhibits excellent catalytic performance with exceeding 99 % enantiomeric excess in the enantioselective electrophilic amination reaction. Moreover, the heterogeneous chiral catalysts are conveniently recycled and could maintain the performance after ten catalytic cycles. Our findings expand the scope to construct stable and crystalline chiral COFs for the asymmetric catalysis.

Selective oxidation of β-keto ester modulated by the d-band centers in D-A conjugated microporous metallaphotoredox catalysts containing M-salen (MZn, Cu and Co) and triazine monomers

Photocatalytic selective oxidation plays an important role in developing green chemistry. However, it is challenging to design an efficient photocatalyst for controlling the selectivity of photocatalytic oxidation reaction and exploring its detailed mechanism. Here, we synthesized three conjugated microporous polymers (CMPs) with D-A structures, named M-SATE-CMPs (MZn, Cu and Co), with different d-band centers based on different metal centers, resulting in the discrepancy in adsorption and activation capacities for the reactants, which produces the selectivity of β-keto esters being catalyzed into α-hydroperoxide β-keto esters (ROOH) or to α-hydroxyl β-keto esters (ROH). Density functional theory (DFT) calculations also demonstrate that the adsorption and activation capacities of the metal active centers in M-SATE-CMPs (MZn, Cu and Co) for ROOH are the key factors to influence the photocatalytic selective oxidation of β-keto ester. This study provides a promising strategy for designing a metallaphotoredox catalyst whose photocatalytic selectivity depends on the d-band center of metal site in the catalyst.

Ultrafast excited state intramolecular proton transfer and isomerization of long-chain linked Schiff bases

The ultrafast proton transfer and the following dynamics for aromatic Schiff bases N,N'-bis(salicylidene)ethylenediamine (salen) and N,N'-bis(salicylidene)-1,4-butylenediamine (salbn) were investigated with experimental and theoretical methods. A dual emission property with a large Stokes shift in salen and salbn indicates that excited state intramolecular proton transfer occurs with photoexcitation. An efficient single proton transfer was confirmed within 200 fs for both molecules. Subsequently, a fast twisted motion of the keto moiety carries cis-keto to a relaxed stable geometry in the S1 state. Following the twisted motion, the phenol ring at keto moiety further rotates to a conical intersection with the ground state and a cis-trans isomerization occurs. The isomerization rate is high, which dominates the competition with the radiative transition, resulting in weak emission intensity. It is confirmed that the length of alkyl chain affects the direction of phenol ring twisting and rotation during the whole subsequent relaxation of excited cis-keto tautomer. Compared with polar solvent acetonitrile, the barrier of isomerization is higher and the hydrogen bond on keto moiety is stronger in nonpolar solvent toluene. It makes fluorescence radiation channels competing with isomerism more likely to occur, contributing to the observed difference of enol/keto emission ratios of salen and salbn in toluene and acetonitrile.

The crucial role of hydrogen bonding in shaping the structures of zinc-based coordination polymers using tridentate N, N, O donor reduced Schiff base ligands and bridging acetates

In this manuscript we report the synthesis and characterization of two new polynuclear zinc(ii) complexes, [Zn2L1(μ-OAc)3]n·H2O (1) and [Zn2L2(μ-OAc)3]n (2) using two tridentate ligands, HL1 {4-chloro-2-(((2-(methylamino)ethyl)amino)methyl)phenol} and HL2 {2,4-dibromo-6-(((3-(methylamino)propyl)amino)methyl)phenol}. The structures were confirmed by single-crystal X-ray diffraction analysis. Both complexes form 1D chains. The energy of H-bonding interaction in the solid state structures of the complexes has been estimated by DFT calculation and the crucial role of hydrogen bonding in shaping their structures has been highlighted.

Molybdenum-Catalyzed Regio- and Enantioselective Amination of Allylic Carbonates: Total Synthesis of (S)-Clopidogrel

The first molybdenum-catalyzed highly regio- and enantioselective allylic amination of both aryl- and alkyl-substituted branched allylic carbonates has been developed. A wide variety of amines, including drugs and complex bioactive molecules, underwent successful amination with excellent reaction outcomes (up to 96% yield, >99% ee, and >20:1 b/l). The reaction could be scaled up and has been applied to the total synthesis of chiral drug molecule (S)-clopidogrel (Plavix).

Specific Discrimination Polymerization for Highly Isotactic Polyesters Synthesis

Isotactic polymers have emerged with unique and excellent properties in material sciences. Specific discrimination polymerization provides an ideal pathway to achieve highly isotactic polymers from their racemic monomers, which is of great significance and a challenge in polymeric chemistry. Although an enantioselective catalyst-mediated asymmetric kinetic resolution polymerization (AKRP) process makes it possible, a general and well-defined strategy for catalyst design is still rarely reported. Here, based on a novel dual-ligand strategy, a new type of chiral (BisSalen)Al complex with high enantioselectivity has been described, in which perfect AKRP of racemic phenethylglycolide (Pegl) is achieved for the first time. The more confined asymmetric microenvironment formed by a dual ligand is the key to improve the enantioselectivity of the original catalyst. To illustrate the generality of this strategy, a series of (BisSalen)Al complexes with homo- or heterodual ligands were designed for the AKRP of Pegl.

Biobased and biodegradable films exhibiting circularly polarized room temperature phosphorescence

There is interest in developing sustainable materials displaying circularly polarized room-temperature phosphorescence, which have been scarcely reported. Here, we introduce biobased thin films exhibiting circularly polarized luminescence with simultaneous room-temperature phosphorescence. For this purpose, phosphorescence-active lignosulfonate biomolecules are co-assembled with cellulose nanocrystals in a chiral construct. The lignosulfonate is shown to capture the chirality generated by cellulose nanocrystals within the films, emitting circularly polarized phosphorescence with a 0.21 dissymmetry factor and 103 ms phosphorescence lifetime. By contrast with most organic phosphorescence materials, this chiral-phosphorescent system possesses phosphorescence stability, with no significant recession under extreme chemical environments. Meanwhile, the luminescent films resist water and humid environments but are fully biodegradable (16 days) in soil conditions. The introduced bio-based, environmentally-friendly circularly polarized phosphorescence system is expected to open many opportunities, as demonstrated here for information processing and anti-counterfeiting.

3D-bioprinted anisotropic bicellular living hydrogels boost osteochondral regeneration via reconstruction of cartilage-bone interface

Reconstruction of osteochondral (OC) defects represents an immense challenge due to the need for synchronous regeneration of special stratified tissues. The revolutionary innovation of bioprinting provides a robust method for precise fabrication of tissue-engineered OCs with hierarchical structure; however, their spatial living cues for simultaneous fulfilment of osteogenesis and chondrogenesis to reconstruct the cartilage-bone interface of OC are underappreciated. Here, inspired by natural OC bilayer features, anisotropic bicellular living hydrogels (ABLHs) simultaneously embedding articular cartilage progenitor cells (ACPCs) and bone mesenchymal stem cells (BMSCs) in stratified layers were precisely fabricated via two-channel extrusion bioprinting. The optimum formulation of the 7% GelMA/3% AlgMA hydrogel bioink was demonstrated, with excellent printability at room temperature and maintained high cell viability. Moreover, the chondrogenic ability of ACPCs and the osteogenic ability of BMSCs were demonstrated in vitro, confirming the inherent differential spatial regulation of ABLHs. In addition, ABLHs exhibited satisfactory synchronous regeneration of cartilage and subchondral bone in vivo. Compared with homogeneous hydrogels, the neo-cartilage and neo-bone in ABLHs were augmented by 23.5% and 20.8%, respectively, and more important, a more harmonious cartilage-bone interface was achieved by ABLHs due to their well-tuned cartilage-bone-vessel crosstalk. We anticipate that such a strategy of tissue-mimetic ABLH by means of bioprinting is capable of spatiotemporal cell-driven regeneration, offering insights into the fabrication of anisotropic living materials for the reconstruction of complex organ defects.

Epoxide/CO2 Cycloaddition Reaction Catalyzed by Indium Chloride Complexes Supported by Constrained Inden Schiff-Base Ligands

Cyclic carbonates have received significant interests for uses as reagents, solvents, and monomers. The coupling reaction of epoxides with carbon dioxide (CO2 ) to produce cyclic carbonate is an attractive route which can significantly reduce greenhouse gas emissions and environmental hazards. Herein, a series of five indium chloride complexes supported by inden Schiff-base ligands were reported along with four X-ray crystal structures. The constrained five-membered rings were added to the ligands to enhance the coordination of epoxides to the In metal. From the catalyst screening, In inden complex having tert-butyl substituents and propylene backbone in combination with tetrabutylammonium bromide (TBAB) exhibited the highest catalytic activity (TON up to 1017) for propylene oxide/CO2 coupling reaction with >99 % selectivity for cyclic carbonate under solvent-free conditions. In addition, the catalyst was shown to be active at atmospheric pressure of CO2 at room temperature. The catalyst system can be applied to various internal and terminal epoxide substrates to exclusively produce the corresponding cyclic carbonates.

Cerium(IV) Pyrasal Complexes: A pH-Dependent 8- to 10-Coordinate Cerium Chelate Switch

In this work, five cerium(IV) complexes were synthesized, three of which were structural isomorphs from the same pyrasal ligand with the solid-state result identified by structural analysis dependent on the initial pH of the reaction solution and the temperature at which the reaction is performed. The ligands explored here are pyrasal ligands, which are Schiff-base ligands formed by the condensation of 2,3-diaminopyrazine and a salicylaldehyde derivative. Pyrasal ligands have weaker binding than other salophen-type ligands due to the electron-withdrawing effect of the nitrogen atoms contained within the pyrazine ring. The weaker binding leaves the ligand more susceptible to the changes in pH and temperature that alternate the chelating environment from 8- to 10-coordinate. This electron-withdrawing effect of the pyrazine backbone also deactivates the second amine after the first condensation addition of salicylaldehyde. Without a metal to template the complex formation reaction, even with extended reaction times and the addition of a large excess of ligand, the result is the addition of only one salicylaldehyde.

Ultra-high-throughput mapping of the chemical space of asymmetric catalysis enables accelerated reaction discovery

The discovery of highly enantioselective catalysts and elucidating their generality face great challenges due to the complex multidimensional chemical space of asymmetric catalysis and inefficient screening methods. Here, we develop a general strategy for ultra-high-throughput mapping of the chemical space of asymmetric catalysis by escaping the time-consuming chiral chromatography separation. The ultrafast ( ~ 1000 reactions/day) and accurate (median error < ±1%) analysis of enantiomeric excess are achieved through the ion mobility-mass spectrometry combines with the diastereoisomerization strategy. A workflow for accelerated asymmetric reaction screening is established and verified by mapping the large-scale chemical space of more than 1600 reactions of α-asymmetric alkylation of aldehyde with organocatalysis and photocatalysis. Importantly, a class of high-enantioselectivity primary amine organocatalysts of 1,2-diphenylethane-1,2-diamine-based sulfonamides is discovered by the accelerated screening, and the mechanism for high-selectivity is demonstrated by computational chemistry. This study provides a practical and robust solution for large-scale screening and discovery of asymmetric reactions.

Amino alcohol-derived chiral stationary phases

An updated minireview of chiral stationary phases (CSPs) based on amino alcohols is presented. In this minireview, we focused on amino alcohols as starting materials in preparation of chiral catalysts for asymmetric organic synthesis and CSPs for chiral separations. Among the various CSPs, we summarized the important developments and applications of the amino alcohol-based Pirkle-type CSPs, ligand exchange CSPs, α-amino acid-derived amino alcohol CSPs, and symmetric CSPs from their first appearance to the present day to propose ideas for the development of new CSPs with improved performance.

Enantioconvergent 6π Electrocyclization Enabled by Photoredox Racemization

This study presents a novel photoredox-enabled enantioconvergent catalytic strategy used to construct chiral 2H-1,3-benzoxazines via an unprecedented oxa-6π electrocyclization utilizing racemic α-substituted glycinates as substrates. The approach leverages a cobalt-based chiral Lewis acid catalyst, which promotes the transformation under thermal or photoredox conditions. While the thermal reaction selectively converts only the (S)-configured glycinates into enantioenriched 2H-1,3-benzoxazines (up to 96:4 e.r.), the addition of 0.5 mol % of a commercially available iridium photocatalyst under visible light irradiation transforms the reaction into an enantioconvergent process. Detailed mechanistic and time course studies of optically pure α-deuterated substrates revealed the presence of an enantiospecific kinetic isotope effect, which helped to clarify the role of both the photo- and chiral Lewis acid catalyst in the reaction sequence. In this dual catalytic system, the photocatalyst promotes a dynamic interconversion between the substrate enantiomers─a process not accessible via ground-state chemistry─while the chiral Lewis acid selectively transforms only the (S)-configured substrates. Further mechanistic evidence for the proposed mechanism is provided by linear free energy relationship analysis, which suggests that the stereodetermining step involves a 6π electrocyclization under both thermal and photoredox conditions.

New Glycosalen-Manganese(III) Complexes and RCA120 Hybrid Systems as Superoxide Dismutase/Catalase Mimetics

Reactive oxygen species are implicated in several human diseases, including neurodegenerative disorders, cardiovascular dysfunction, inflammation, hereditary diseases, and ageing. MnIII-salen complexes are superoxide dismutase (SOD) and catalase (CAT) mimetics, which have shown beneficial effects in various models for oxidative stress. These properties make them well-suited as potential therapeutic agents for oxidative stress diseases. Here, we report the synthesis of the novel glycoconjugates of salen complex, EUK-108, with glucose and galactose. We found that the complexes showed a SOD-like activity higher than EUK-108, as well as peroxidase and catalase activities. We also investigated the conjugate activities in the presence of Ricinus communis agglutinin (RCA120) lectin. The hybrid protein-galactose-EUK-108 system showed an increased SOD-like activity similar to the native SOD1.

Turning on Asymmetric Catalysis of Achiral Metal-Organic Frameworks by Imparting Chiral Microenvironment

The development of heterogeneous asymmetric catalysts has attracted increasing interest in synthetic chemistry but mostly relies on the immobilization of homogeneous chiral catalysts. Herein, a series of chiral metal-organic frameworks (MOFs) have been fabricated by anchoring similar chiral hydroxylated molecules (catalytically inactive) with different lengths onto Zr-oxo clusters in achiral PCN-222(Cu). The resulting chiral MOFs exhibit regulated enantioselectivity up to 83 % ee in the asymmetric ring-opening of cyclohexene oxide. The chiral molecules furnished onto the catalytic Lewis sites in the MOF create multilevel microenvironment, including the hydrogen interaction between the substrate and the chiral -OH group, the steric hindrance endowed by the benzene ring on the chiral molecules, and the proximity between the catalytic sites and chiral molecules confined in the MOF pores, which play crucial roles and synergistically promote chiral catalysis. This work nicely achieves heterogeneous enantioselective catalysis by chiral microenvironment modulation around Lewis acid sites.

Light-enabled deracemization of cyclopropanes by Al-salen photocatalysis

Privileged chiral catalysts-those that share common structural features and are enantioselective across a range of reactions-continue to transform the chemical-research landscape1. In recent years, new reactivity modes have been achieved through excited-state catalysis, processes activated by light, but it is unclear if the selectivity of ground-state privileged catalysts can be matched. Although the interception of photogenerated intermediates by ground-state cycles has partially addressed this challenge2, single, chiral photocatalysts that simultaneously regulate reactivity and selectivity are conspicuously scarce3. So far, precision donor-acceptor recognition motifs remain crucial in enantioselective photocatalyst design4. Here we show that chiral Al-salen complexes, which have well-defined photophysical properties, can be used for the efficient photochemical deracemization5 of cyclopropyl ketones (up to 98:2 enantiomeric ratio (e.r.)). Irradiation at λ = 400 nm (violet light) augments the reactivity of the commercial catalyst to enable reactivity and enantioselectivity to be regulated simultaneously. This circumvents the need for tailored catalyst-substrate recognition motifs. It is predicted that this study will stimulate a re-evaluation of many venerable (ground-state) chiral catalysts in excited-state processes, ultimately leading to the identification of candidates that may be considered 'privileged' in both reactivity models.

Chiral Perovskite Nanocrystals for Asymmetric Reactions: A Highly Enantioselective Strategy for Photocatalytic Synthesis of N-C Axially Chiral Heterocycles

Catalytic approaches to generate enantiospecific chiral centers are the major premise of modern organic chemistry. Heterogeneous catalysis is responsible for the vast majority of chemical transformations, yet the direct employment of chiral solid catalysts for asymmetric synthesis is mostly overlooked. Here, we demonstrated that a heterogeneous metal-halide perovskite nanocrystal (NC) catalyst is active for asymmetric organic synthesis under visible-light activation. Chiral 1-phenylethylamine (PEA)-hybridized perovskite PEA/CsPbBr3 NC photocatalysts exhibit an enantioselective (up to 99% enantiomer excess, ee) avenue to produce N-C axially chiral N-heterocycles, i.e., N-arylindoles from N-arylamine photo-oxidation. Mechanistic investigation indicated a discriminated prochiral binding of the N-arylamine substrates onto the chiral-NC surface with ca. -2.4 kcal/mol enantiodifferentiation. Our perovskite NC heterogeneous catalytic system not only demonstrates a promising strategy to address the long-term challenges in atroposelective pharmaceutical scaffold synthesis but also paves the road to directly employ chiral solids for asymmetric synthesis.

Mimosa-Inspired Stimuli-Responsive Curling Bioadhesive Tape Promotes Peripheral Nerve Regeneration

Trauma often results in peripheral nerve injuries (PNIs). These injuries are particularly challenging therapeutically because of variable nerve diameters, slow axonal regeneration, infection of severed ends, fragility of the nerve tissue, and the intricacy of surgical intervention. Surgical suturing is likely to cause additional damage to peripheral nerves. Therefore, an ideal nerve scaffold should possess good biocompatibility, diameter adaptability, and a stable biological interface for seamless biointegration with tissues. Inspired by the curl of Mimosa pudica, this study aimed to design and develop a diameter-adaptable, suture-free, stimulated curling bioadhesive tape (SCT) hydrogel for repairing PNI. The hydrogel is fabricated from chitosan and acrylic acid-N-hydroxysuccinimide lipid via gradient crosslinking using glutaraldehyde. It closely matches the nerves of different individuals and regions, thereby providing a bionic scaffold for axonal regeneration. In addition, this hydrogel rapidly absorbs tissue fluid from the nerve surface achieving durable wet-interface adhesion. Furthermore, the chitosan-based SCT hydrogel loaded with insulin-like growth factor-I effectively promotes peripheral nerve regeneration with excellent bioactivity. This procedure for peripheral nerve injury repair using the SCT hydrogel is simple and reduces the difficulty and duration of surgery, thereby advancing adaptive biointerfaces and reliable materials for nerve repair.

Mechanochemical Duff Reaction in Solid Phase for Easy Access to Mono- and Di-formyl Electron-Rich Arenes

A sustainable alternative to the century-old Duff reaction was developed by adopting a solid-phase mechanochemical route. A series of mono-formyl electron-rich arenes were prepared in high yields in silica as the solid reaction media using a combination of hexamethylenetetramine (HMTA) as the formyl source and a small amount of H2SO4 in a mixer mill. The use of toxic, costly, and low-boiling trifluoroacetic acid was avoided in the new mold of the mechanochemical Duff reaction. The mono-formyl phenols were obtained with exclusive ortho-selectivity, whereas unprecedented para-formylation was observed for other electron-rich aromatics. By controlling the stoichiometry of HMTA, the method offers easy access to di-formylated phenols as well. The scalability of the reaction was validated with selected substrates at the gram-scale level. In a case study, a mechanochemical tandem reaction was explored in the synthesis of a rhodol derivative. The solvent-free, metal-free mild method of formylation, with the absence of tedious work-up steps and shorter reaction times using an inexpensive mineral acid, is a sustainable alternative to the available methods for aromatic formylation.

Cu(II) and Mn(II) Anchored on Functionalized Mesoporous Silica with Schiff Bases: Effects of Supports and Metal-Ligand Interactions on Catalytic Activity

New series of Cu(II) and Mn(II) complexes with Schiff base ligands derived from 2-furylmethylketone (Met), 2-furaldehyde (Fur), and 2-hydroxyacetopheneone (Hyd) have been synthesized in situ on SBA-15-NH₂, MCM-48-NH₂, and MCM-41-NH₂ functionalized supports. The hybrid materials were characterized by X-ray diffraction, nitrogen adsorption-desorption, SEM and TEM microscopy, TG analysis, and AAS, FTIR, EPR, and XPS spectroscopies. Catalytic performances were tested in oxidation with the hydrogen peroxide of cyclohexene and of different aromatic and aliphatic alcohols (benzyl alcohol, 2-methylpropan-1-ol, and 1-buten-3-ol). The catalytic activity was correlated with the type of mesoporous silica support, ligand, and metal-ligand interactions. The best catalytic activity of all tested hybrid materials was obtained in the oxidation of cyclohexene on SBA-15-NH₂-MetMn as a heterogeneous catalyst. No leaching was evidenced for Cu and Mn complexes, and the Cu catalysts were more stable due to a more covalent interaction of the metallic ions with the immobilized ligands.

Liquid Crystal Assembly for Ultra-dissymmetric Circularly Polarized Luminescence and Beyond

Circularly polarized luminescence (CPL) is attracting much interest because it can carry extensive optical information. CPL shows left- or right-handedness and can be regarded as part of high-level visual perception to supply an extra dimension of information with regard to regular light. A key to meeting the needs for practical applications is to develop the emerging field of ultra-dissymmetric CPL. Chiral liquid crystal (LC) assemblies─otherwise referred to as cholesteric liquid crystals (CLCs)─are essentially organized helical superstructures with a highly ordered one-dimensional orientation, and distinctly superior to regular helical supramolecules. CLCs can achieve a perfect equilibrium of molecular short-range interaction and long-range orientational order, enabling molecule-scale chirality on a helical pitch and observable scale. LC assembly could be an ideal strategy for amplifying chirality, making it accessible to ultra-dissymmetric CPL. Herein, we focused on some basic but important issues regarding CPL: (i) How can CPL be created from chiral dyes? (ii) Is the chirality of luminescent dyes an essential factor for the generation of CPL? That is, can all chiral dyes emit CPL and vice versa? (iii) How can CPL be transferred within intermolecular systems, and what principles of CPL transmission should be followed? Given these queries and our work, in this Perspective we discuss the generation, transmission, and modulation of CPL with chiral LC assembly, aiming to design and build up novel chiroptical materials. Recent applications of CPL-active LC microstructures in three-dimensional displays, circularly polarized lasers, and asymmetric catalysis are also discussed.

DFT stimulation and experimental insights of chiral Cu(II)-salen scaffold within the pocket of MWW-zeolite and its catalytic study

A Cu(II)-salen complex encapsulated in MWW-framework as an efficient chiral organocatalyst was developed for the synthesis of 3,4-dihydropyrimidin-2-(1H)-one (DHPMs) derivatives via an asymmetric pathway. In order to confirm its structural properties, single-crystal X-ray diffraction, powder XRD, BET, XPS, FE-SEM, EDX, UV-Vis, and FTIR spectra were used. Using computer-assisted DFT calculations, the Cu(II)-salen complex has been fine-tuned to fit into the pocket of the porous MWW support while keeping its chirality. This organocatalyst was shown to be a potent catalyst for the formation of the desired DHPMs product under short reaction times. Furthermore, this green protocol allows rapid and simple isolation of active MWW-trapped Cu(II)-salen scaffolds and its reusability in at least five consecutive runs without losing much of its activity.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Bis(salicylamidine) Ligands (FAlen): A Variant of Salen with "à la Carte" Denticity

Ethylene- and phenylene-bridged bis(salicylamidine) ligands have been readily prepared from ethylene or phenylenediamine and iminium chloride derivatives generated in situ from N,N-dialkylsalicylamides. The former, in its diprotonated form (FAlenH₂), reacts with AlMe₃ to afford a zwitterionic dimethyldiphenoxyaluminate complex with the FAlen ligand monoprotonated and in a bidentate κ²O,O' fashion. A phenylene-bridged proligand behaves differently, yielding a neutral methylaluminum complex bearing a κ³O,N,O'-coordinated FAlen ligand. From these complexes, methyl anion abstraction with B(C₆F₅)₃ or a reaction with Schrock's alcohol leads to the corresponding aluminum cationic or alkoxy complexes in which a κ⁴O,N,N',O'-coordination mode of the FAlen ligand is observed. X-ray diffraction studies of the proligands and of the complexes show that the amidine functions feature a trans configuration when the N-amidine atom is not coordinated to the metal and conversely a cis configuration when it is. Density functional theory calculations show that trans-cis isomerization of the amidine functions occurs upon coordination with the metal ion with very low energy barriers. They also confirm the intuition that the denticity of the FAlen ligands in the complexes is directly related to the electron richness of the metal ion. At last, FAlen Al complexes are used as initiators for the controlled ring-opening polymerization of rac-lactide to afford poly(lactic acid) with slight isotactic bias.

Fluorine-based Zn salan complexes

We synthesised and characterised the racemic and chiral versions of two Zn salan fluorine-based complexes from commercially available materials. The complexes are susceptible to absorbing H₂O from the atmosphere. In solution (DMSO-H₂O) and at the millimolar level, experimental and theoretical studies identify that these complexes exist in a dimeric-monomeric equilibrium. We also investigated their ability to sense amines via¹⁹F NMR. In CDCl₃ or d⁶-DMSO, strongly coordinating molecules (H₂O or DMSO) are the limiting factor in using these easy-to-make complexes as chemosensory platforms since their exchange with analytes requires an extreme excess of the latter.

Catalytic Asymmetric Deoxygenative Cyclopropanation Reactions by a Chiral Salen-Mo Catalyst

The catalytic asymmetric cyclopropanation reaction of alkenes with diazo compounds is a direct and powerful method to construct chiral cyclopropanes that are essential to drug discovery. However, diazo compounds are potentially explosive and often require hazardous reagents for their preparation. Here, we report on the use of 1,2-dicarbonyl compounds as safe and readily available surrogates for diazo compounds in the direct catalytic asymmetric deoxygenative cyclopropanation reaction. Enabled by a class of simple and readily accessible chiral salen-Mo catalysts, the reaction proceeded with generally good enantioselectivities and yields toward a wide range of substrates (80 examples). Preliminary mechanistic studies suggested that the proposed μ-oxo bridged dinuclear Mo(III)-species was the catalytically active species. This strategy not only provides a promising route for the synthesis of chiral cyclopropanes but also opens a new window for the potential applications of chiral salen-Mo complexes in asymmetric catalysis.

Synthesis, Characterization, and Study of Catalytic Activity of Chiral Cu(II) and Ni(II) Salen Complexes in the α-Amino Acid C-α Alkylation Reaction

A new family of Cu(II) and Ni(II) salen complexes was synthesized and fully characterized through various physicochemical methods. Their catalytic activity was evaluated in the phase transfer C_α-alkylation reaction of the Schiff bases of D,L-alanine ester and benzaldehyde derivatives. It was found that the introduction of a chlorine atom into the ortho- and para-positions of the phenyl ring of the substrate resulted in an increase in both the chemical yield and the asymmetric induction (ee 66-98%). The highest enantiomeric excess was achieved in the case of a Cu(II) salen complex based on (S,S)-cyclohexanediamine and salicylaldehyde at -20 °C. The occurrence of a bulky substituent in the ligand present in the complexes led to a drastic decrease in ee and chemical yield. For instance, the introduction of bulky substituents at positions 3 and 5 of the phenyl ring of the catalyst resulted in a complete loss of the stereoselectivity control in the alkylation reaction.

Synthesis of amphiphilic chiral salen complexes and their conformational manipulation at the air-water interface

A series of amphiphilic salen complexes, [L1a,bM] and [L2a,bM], were designed and synthesized. These complexes consist of two or four hydrophilic triethylene glycol (TEG) chains and a hydrophobic π-extended metallosalen core based on naphthalene or phenanthrene. The obtained amphiphilic complexes, [L1bM] (M = Ni, Cu, Zn), formed a monolayer at the air-water interface, while the monocationic [L1bCo(MeNH₂)₂](OTf) did not form a well-defined monolayer. The number of hydrophilic TEG chains also had an influence on the monolayerformation behavior; the tetra-TEG derivatives, [L1bNi] and [L2bNi], showed a pressure rise at a less compressed region than the bis-TEG derivatives, [L1aNi] and [L2aNi]. In addition, the investigation of their compressibility and compression modulus suggested that the tetra-TEG derivatives, [L1bNi] and [L2bNi], are more flexible than the corresponding bis-TEG analogues, [L1aNi] and [L2aNi], and that the phenanthrene derivatives [L1a,bNi] were more rigid than the corresponding naphthalene analogues, [L2a,bNi]. The Langmuir-Blodgett (LB) films of one of the complexes, [L1bNi], showed CD spectra slightly different from that in solution, which may originate from the unique anisotropic environment of the air-water interface. Thus, we demonstrated the possibility of controlling the chiroptical properties of metal complexes by mechanical compression.

Reticular Synthesis of One-Dimensional Covalent Organic Frameworks with 4-c sql Topology for Enhanced Fluorescence Emission

Covalent organic frameworks (COFs) have been extensively investigated due to their unique structure, porosity, and functionality. However, at the topological level, COFs remain as two-dimensional (2D) or three-dimensional (3D) structures, while COFs with one-dimensional (1D) topology have not been systematically explored. In this work, we proposed a synthetic strategy for the construction of 1D-COFs based on non-linear edges and suitable high-symmetry vertices. Compared with their 2D-COFs counterparts, the 1D-COFs with AIEgens located at the vertex of the frame exhibited enhanced fluorescence. The density functional theory (DFT) calculations revealed that the dimensional-induced rotation restriction (DIRR) effect could spontaneously introduce additional non-covalent interactions between the strip frames, which could substantially diminish non-radiative transitions. This work also provides protocols for the design of 1D-COFs and a guidance scheme for the synthesis of emitting COFs.

Nickel-catalyzed alkylation of ketones and nitriles with primary alcohols

Nickel(II)-salen or nickel(II)-salphen catalyzed α-alkylation of ketones and nitriles with primary alcohols is reported. Various α-alkylated ketones and nitriles were obtained in high yields through a borrowing hydrogen strategy by using 1-3 mol% of nickel catalyst and a catalytic amount of NaOH (5-10 mol%) under aerobic conditions.

Ion-in-Conjugation: A Promising Concept for Multifunctional Organic Semiconductors

Most organic semiconductors (OSCs) consist of conjugated skeletons with flexible peripheral chains. Their weak intermolecular interactions from dispersion and induction forces result in environmental susceptibilities and are unsuitable for many multifunctional applications where direct exposure to external environments is unavoidable, such as gas absorption, chemical sensing, and catalysis. To exploit the advantages of inorganic semiconductors in OSCs, ion-in-conjugation (IIC) materials are proposed. An IIC material refers to any conjugated material (molecules, polymers, and crystals) in Kekule's structural formula containing stoichiometric ionic states in its conjugated backbone in the electronic ground state. In this review, the definitions, structures, synthesis, properties, and applications of IIC materials are described briefly. Four types of IIC material, including zwitterionic conjugated molecules/polymers, conjugated ionic dyes, π-d conjugated molecules and polymers, and coordinatively doped polymers, are reported. Their applications in gas sensing, humidity sensing, resistive memory devices, and thermal/photo-/electro-catalysis are demonstrated. The challenges and opportunities for future research are also discussed. It is expected that this work will inspire the design of new organic electronic information materials.

Self-assembled mononuclear complexes: open metal sites and inverse dimension-dependent catalytic activity for the Knoevenagel condensation and CO2 cycloaddition

To lessen the greenhouse effect, measures such as improving the recovery of crude oil and converting carbon dioxide (CO₂) into valuable chemicals are necessary to create a sustainable low-carbon future. To this end, the development of efficient new oil-displacing agents and CO₂ conversion has aroused great interest in both academia and industry. The Knoevenagel condensation and CO₂ cycloaddition are the key reactions to solve the above problems. Four Cu- or Zn-based molecular complexes built from different ligands possessing hydrophilic-hydrophobic layers and different dimensionalities were chosen as solid catalysts for this study. Structural analysis revealed the presence of hydrophilic-hydrophobic layers and open metal sites in the low-dimensional complexes. To obtain deep insight into the reaction mechanism, first-principles density functional theory (DFT) calculations were carried out. These calculations confirmed that in the Knoevenagel condensation reaction, the final formation of benzylidenemalononitrile is the rate-determining step (an energy barrier (ΔE) value of 73.2 kJ mol^-1). The zero-dimensional (0D) Cu molecular complex with unsaturated metal centers, hydrophilic and hydrophobic layers, exhibited higher catalytic activity (yield: 100%, temperature: room temperature, and time: 2 h) compared with one- and two-dimensional Cu complexes. In the presence of a 0D Zn complex co-catalyzed with Br^- in the CO₂ cycloaddition reaction, the ΔE value reduces to 35.5 kJ mol^-1 for the ring opening of styrene oxide (SO), which is significantly lower than Br^- catalyzed (80.9 kJ mol^-1) reactions. The roles of unsaturated metal centers, hydrophilic-hydrophobic layers and dimensionality in the Knoevenagel condensation and CO₂ cycloaddition were explained in the results of structure-activity relationships.

Fluoride Additive as a Simple Tool to Qualitatively Improve Performance of Nickel-Catalyzed Asymmetric Michael Addition of Malonates to Nitroolefins

Nowadays, design of the new chiral ligands for organometallic catalysts is often based on the step-by-step increase in their complexity to improve efficiency. Herein we describe that simple in situ addition of the fluoride source to the asymmetric organometallic catalyst can improve not only activity but also enantioselectivity. Bromide-nickel diimine complexes were found to catalyze asymmetric Michael addition in low yields and ee, but activation with fluoride leads to a significant improvement in catalyst performance. The developed approach was applied to prepare several enantioenriched GABA analogues.

Variation of the Emission Efficiency and Wavelength from Fluorescent Zinc Salen Complexes upon Systematic Structural Modifications

Understanding the photophysical properties of metal salen complexes is not straightforward because the emission efficiency is altered irregularly upon structural modifications. The present study prepared zinc salen complexes with systematic structural variations to pinpoint critical factors to determine the emission efficiency. One of the important experimental observations is the regiochemistry of a phenolate substituent affecting emission efficiency from a salicylidene fluorophore, which is nicely assigned as arising from the photoexcited electronic structure of metal salen complexes. Another significant finding is the thermal fluctuation of a salen ligand arising from the mismatched ligand-metal interaction, which has a significant impact on fluorescence lifetime. The present study sheds light on hidden factors that alter photophysical properties of a metal salen complex, which provide valuable insights into designing new photoactive salen ligands.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Post-Modification of Copolymers Obtained by ATRP for an Application in Heterogeneous Asymmetric Salen Catalysis

Copolymers are valuable supports for obtaining heterogeneous catalysts that allow their recycling and therefore substantial savings, particularly in the field of asymmetric catalysis. This contribution reports the use of two comonomers: Azido-3-propylmethacrylate (AZMA) bearing a reactive azide function was associated with 2-methoxyethyl methacrylate (MEMA), used as a spacer, for the ATRP synthesis of copolymers, and then post-functionalized with a propargyl chromium salen complex. The controlled homopolymerization of MEMA by ATRP was firstly described and proved to be more controlled in molar mass than that of AZMA for conversions up to 63%. The ATRP copolymerization of both monomers made it possible to control the molar masses and the composition, with nevertheless a slight increase in the dispersity (from 1.05 to 1.3) when the incorporation ratio of AZMA increased from 10 to 50 mol%. These copolymers were post-functionalized with chromium salen units by click chemistry and their activity was evaluated in the asymmetric ring opening of cyclohexene oxide with trimethylsilyl azide. At an equal catalytic ratio, a significant increase in enantioselectivity was obtained by using the copolymer containing the largest part of salen units, probably allowing, in this case, the more favorable bimetallic activation of both the engaged nucleophile and electrophile. Moreover, the catalytic polymer was recovered by simple filtration and re-engaged in subsequent catalytic runs, up to seven times, without loss of activity or selectivity.