Metal-Organic Framework Magnets

Effect of metal-ligand interactions on magnetic characteristics of two-dimensional Kagome structured perthiolated coronene (PTC) metal-organic frameworks (MOFs)

In recent years, the potential applications of two-dimensional (2D) metal-organic framework (MOF) materials in fields like spintronics have drawn increasing attention. Inspired by the successful synthesis of a perthiolated coronene (PTC)-Fe MOF structure, this study explores the fine-tuning of its electronic and magnetic structure by substituting Fe elements with various transition metals. Our calculations demonstrate a substantial increase in the Curie temperature (Tc) by a factor of 5 for Co and 10 for Mn when replacing Fe. This enhancement is attributed to the elevated electron density near the Fermi level, facilitating the generation of additional itinerant electrons crucial for the Ruderman-Kittel-Kasuya-Yosida (RKKY) exchange mechanism. However, substituting Fe with V, Cr, Ni, and Cu leads to a loss of ferromagnetic ground state. Our work enhances the understanding of the electronic and magnetic behavior of the 2D PTC-TM (transition metal) MOF family, and provides a promising avenue for engineering 2D magnetic MOF systems.

Assembly of a trapped valent CeIII/IV-TCNQ complex through metal-ligand redox cooperativity

Complex (Cp3CeIV)2(TCNQ)(CeIIICp3)2 (1) was prepared by reducing neutral TCNQ0 (tetracyanoquinodimethane) with Cp3Ce(THF). Two types of cerium centres with a dianionic TCNQ2- moiety are present in 1, wherein each of the four cyano-groups are bound by a cation. Formation of this trapped-valent organocerium compound 1 is facilitated by metal-ligand redox cooperativity. Characterization of 1 was carried out using structural-, magnetometry-, and IR-spectroscopic analyses. Photophysical studies on this compound reveal CeIII luminescence, and opens up avenues for promising multifunctional, mixed-valent lanthanide materials.

Halide mediated modulation of magnetic interaction and anisotropy in dimeric Co(II) complexes

The burgeoning interest in the field of molecular magnetism is to perceive the high magnetic anisotropy in different geometries of metal complexes and hence to draw a magneto-structural correlation. Despite a handful of examples to exemplify the magnetic anisotropy in various coordination geometries of mononuclear complexes, the magnetic anisotropies for two different coordination geometries are underexplored. Employing an appropriate synthetic strategy utilizing the ligand LH2 [2,2'-{(1E,1'E)-pyridine2,6-diyl-bis(methaneylylidine)}-bis(azaneylylidine)diphenol] and cobalt halide salts in a 1 : 2 stoichiometric ratio in the presence of triethylamine allowed us to report a new family of dinuclear cobalt complexes [CoII2X2(L)(P)(Q)]·S with varying terminal halides [X = Cl, P = CH3CN, Q = H2O, S = H2O (1), X = Br, P = CH3CN, Q = H2O, S = H2O (2), X = I, P = CH3CN, and Q = CH3CN (3)]. All these complexes are characterized through single crystal X-ray crystallography, which reveals their crystallization in the monoclinic system P21/n space group with nearly identical structural features. These complexes share vital components, including Co(II) centers, a fully deprotonated ligand [L]2-, halide ions, and solvent molecules. The [L]2- ligand contains two Co(II) centers, where phenolate oxygen atoms bridge the Co(II) centers, forming a Co2O2 four-membered ring. Co1 demonstrates a distorted pentagonal-bipyramidal geometry with axial positions for solvent molecules, while Co2 displays a distorted tetrahedral geometry involving phenolate oxygen atoms and halide ions. Temperature-dependent dc magnetic susceptibility measurements were conducted on 1-3 within a range of 2 to 300 K at 1 kOe. The χmT vs. T plots exhibit similar trends, with χmT values at 300 K higher than the spin-only value, signifying a significant orbital contribution. As the temperature decreases, χmT decreases smoothly in all the complexes; however, no clear saturation at low temperatures is observed. Field-dependent magnetization measurements indicate a rapid increase below 20 kOe, with no hysteresis and a low magnetic blocking temperature. DFT and CASSCF/NEVPT2 theoretical calculations were performed to perceive the magnetic interaction and single-ion anisotropies of Co(II) ions in various ligand-field environments.

Gas-Induced Electrical and Magnetic Modulation of Two-Dimensional Conductive Metal-Organic Framework

Controlled modulation of electronic and magnetic properties in stimuli-responsive materials provides valuable insights for the design of magnetoelectric or multiferroic devices. This paper demonstrates the modulation of electrical and magnetic properties of a semiconductive, paramagnetic metal-organic framework (MOF) Cu3(C6O6)2 with small gaseous molecules, NH3, H2S, and NO. This study merges chemiresistive and magnetic tests to reveal that the MOF undergoes simultaneous changes in electrical conductance and magnetization that are uniquely modulated by each gas. The features of response, including direction, magnitude, and kinetics, are modulated by the physicochemical properties of the gaseous molecules. This study advances the design of multifunctional materials capable of undergoing simultaneous changes in electrical and magnetic properties in response to chemical stimuli.

Magnetic structure and properties of the honeycomb antiferromagnet [Na(OH2)3]Mn(NCS)3

We report the magnetic structure and properties of a thiocyanate-based honeycomb magnet [Na(OH2)3]Mn(NCS)3 which crystallises in the unusual low-symmetry trigonal space group P3̄. Magnetic measurements on powder samples show this material is an antiferromagnet (ordering temperature TN,mag = 18.1(6) K) and can be described by nearest neighbour antiferromagnetic interactions J = -11.07(4) K. A method for growing neutron-diffraction sized single crystals (>10 mm3) is demonstrated. Low temperature neutron single crystal diffraction shows that the compound adopts the collinear antiferromagnetic structure with TN,neut = 18.94(7) K, magnetic space group P3̄'. Low temperature second-harmonic generation (SHG) measurements provide no evidence of breaking of the centre of symmetry.

The past 10 years of molecular ferroelectrics: structures, design, and properties

Ferroelectricity, which has diverse important applications such as memory elements, capacitors, and sensors, was first discovered in a molecular compound, Rochelle salt, in 1920 by Valasek. Owing to their superiorities of lightweight, biocompatibility, structural tunability, mechanical flexibility, etc., the past decade has witnessed the renaissance of molecular ferroelectrics as promising complementary materials to commercial inorganic ferroelectrics. Thus, on the 100th anniversary of ferroelectricity, it is an opportune time to look into the future, specifically into how to push the boundaries of material design in molecular ferroelectric systems and finally overcome the hurdles to their commercialization. Herein, we present a comprehensive and accessible review of the appealing development of molecular ferroelectrics over the past 10 years, with an emphasis on their structural diversity, chemical design, exceptional properties, and potential applications. We believe that it will inspire intense, combined research efforts to enrich the family of high-performance molecular ferroelectrics and attract widespread interest from physicists and chemists to better understand the structure-function relationships governing improved applied functional device engineering.

High-Resolution 17O Solid-State NMR as a Unique Probe for Investigating Oxalate Binding Modes in Materials: The Case Study of Calcium Oxalate Biominerals

Oxalate ligands are found in many classes of materials, including energy storage materials and biominerals. Determining their local environments at the atomic scale is thus paramount to establishing the structure and properties of numerous phases. Here, we show that high-resolution 17O solid-state NMR is a valuable asset for investigating the structure of crystalline oxalate systems. First, an efficient 17O-enrichment procedure of oxalate ligands is demonstrated using mechanochemistry. Then, 17O-enriched oxalates were used for the synthesis of the biologically relevant calcium oxalate monohydrate (COM) phase, enabling the analysis of its structure and heat-induced phase transitions by high-resolution 17O NMR. Studies of the low-temperature COM form (LT-COM), using magnetic fields from 9.4 to 35.2 T, as well as 13C-17O MQ/D-RINEPT and 17O{1H} MQ/REDOR experiments, enabled the 8 inequivalent oxygen sites of the oxalates to be resolved, and tentatively assigned. The structural changes upon heat treatment of COM were also followed by high-resolution 17O NMR, providing new insight into the structures of the high-temperature form (HT-COM) and anhydrous calcium oxalate α-phase (α-COA), including the presence of structural disorder in the latter case. Overall, this work highlights the ease associated with 17O-enrichment of oxalate oxygens, and how it enables high-resolution solid-state NMR, for "NMR crystallography" investigations.

Cobalt MOF-Based Porous Carbonaceous Spheres for Multimodal Soft Actuator Exhibiting Intricate Biomimetic Motions

The advancement of active electrode materials is essential to meet the demand for multifaceted soft robotic interactions. In this study, a new type of porous carbonaceous sphere (PCS) for a multimodal soft actuator capable of both magnetoactive and electro-ionic responses is reported. The PCS, derived from the simultaneous oxidative and reductive breakdown of specially designed cobalt-based metal-organic frameworks (Co-MOFs) with varying metal-to-ligand ratios, exhibits a high specific surface area of 529 m2 g-1 and a saturated magnetization of 142.7 Am2 kg-1. The size of the PCS can be controlled through the Ostwald ripening mechanism, while the porous structure can be regulated by adjusting the metal-to-ligand mol ratio. Its exceptional compatibility with poly(3,4-ethylene-dioxythiophene)-poly(styrenesulfonate) enables the creation of uniform electrode, crucial for producing soft actuators that work in both magnetic and electrical fields. Operated at an ultralow voltage of 1 V, the PCS-based actuator generates a blocking force of 47.5 mN and exhibits significant bending deflection even at an oscillation frequency of 10 Hz. Employing this simultaneous multimodal actuation ensures the dynamic and complex motions of a balancing bird robot and a dynamic eagle robot. This advancement marks a significant step toward the realization of more dynamic and versatile soft robotic systems.

Fluorescent Materials Based on Spiropyran for Advanced Anti-Counterfeiting and Information Encryption

In daily life, counterfeit and substandard products, particularly currency, medicine, food, and confidential documents, are capable of bringing about very serious consequences. The development of anti-counterfeiting and authentication technologies with multilevel securities is a powerful means to overcome this challenge. Among various anti-counterfeiting technologies, fluorescent anti-counterfeiting technology is well-known and commonly used to fight counterfeiters due to its wide material source, low cost, simple usage, good concealment, and simple response mechanism. Spiropyran is favored by scientists in the fields of anti-counterfeiting and information encryption due to its reversible photochromic property. Here, we summarize the current available spiropyran-based fluorescent materials from design to anti-counterfeiting applications. This review will be help scientists to design and develop fluorescent anti-counterfeiting materials with high security, high performance, quick response, and high anti-counterfeiting level.

Functional metal-organic liquids

For decades, the study of coordination polymers (CPs) and metal-organic frameworks (MOFs) has been limited primarily to their behavior as crystalline solids. In recent years, there has been increasing evidence that they can undergo reversible crystal-to-liquid transitions. However, their "liquid" states have primarily been considered intermediate states, and their diverse properties and applications of the liquid itself have been overlooked. As we learn from organic polymers, ceramics, and metals, understanding the structures and properties of liquid states is essential for exploring new properties and functions that are not achievable in their crystalline state. This review presents state-of-the-art research on the liquid states of CPs and MOFs while discussing the fundamental concepts involved in controlling them. We consider the different types of crystal-to-liquid transitions found in CPs and MOFs while extending the interpretation toward other functional metal-organic liquids, such as metal-containing ionic liquids and porous liquids, and try to suggest the unique features of CP/MOF liquids. We highlight their potential applications and present an outlook for future opportunities.

Hydrogel/MOF Dual-Modified Photoelectrochemical Biosensor for Antibiofouling and Biocompatible Dopamine Detection

For accurate in vivo detection, nonspecific adsorption of biomacromolecules such as proteins and cells is a severe issue. The adsorption leads to electrode passivation, significantly compromising both the sensitivity and precision of sensing. Meanwhile, common antibiofouling modifications, such as polymer coatings, still grapple with issues related to biocompatibility, electrode passivation, and miniaturization. Herein, we propose a composite antibiofouling coating strategy based on zwitterionic metal-organic frameworks (Z-MOFs) and a combination of acrylamide hydrogels. On a well-designed TiO2/Z-MOF/hydrogel photoelectrode, we achieve highly sensitive and selective detection of dopamine in complex biological environments. The hydrogel's three-dimensional porous structure combined with unique microporous architecture of Z-MOF ensures effective sieving of interfering macromolecules while preserving efficient small molecules and electron transport. This innovative approach paves the way for constructing miniature, in vivo antibiofouling sensors for molecule monitoring in living organisms with complicated chemical environments.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Spin-polarized currents induced in antiferromagnetic polymer multilayered field-effect transistors

A theoretical construction of an antiferromagnetic polymer multilayered field-effect transistor with polymers stretched between the source and drain contacts was undertaken. The model employed a quantum approach to the on-chain spin-charge distribution, which was self-consistently coupled with the charge distribution controlled by the gate voltage. Contrary to standard field-effect transistors, we found that the current firstly increased superlinearly with the drain voltage, then it achieved the maximum for drain voltages notably lower than the gate voltage, and after that, it decreased with the drain voltage with no saturation. Such effects were coupled with the formation of the current spin-polarization ratio, where the on-chain mobility of respective spin-polarized charges was significantly dependent on the applied drain voltage. These effects arise from competition among the antiferromagnetic coupling, the intra-site spin-dependent Coulomb interaction, and the applied drain and gate voltages, which strongly influence the on-chain spin-charge distribution, varying from an alternating spin configuration to a spin-polarized configuration at both ends of the chain. Substantial control over the magnitude of spin-polarized currents was achieved by manipulating gate and drain voltages, showcasing the feasibility of practical applications in spintronics.

Study of Molecular Dimer Morphology Based on Organic Spin Centers: Nitronyl Nitroxide Radicals

In this work, in order to investigate the short-range interactions between molecules, the spin-magnetic unit nitronyl nitroxide (NN) was introduced to synthesize self-assembly single radical molecules with hydrogen bond donors and acceptors. The structures and magnetic properties were extensively investigated and characterized by UV-Vis absorption spectroscopy, electron paramagnetic resonance (EPR), and superconducting quantum interference devices (SQUIDs). Interestingly, it was observed that the single molecules can form two different dimers (ring-closed dimer and "L"-type dimer) in different solvents, due to hydrogen bonding, when using EPR to track the molecular spin interactions. Both dimers exhibit ferromagnetic properties (for ring-closed dimer, J/kB = 0.18 K and ΔES-T = 0.0071 kcal/mol; for "L"-type dimer, the values were J/kB = 9.26 K and ΔES-T = 0.037 kcal/mol). In addition, the morphologies of the fibers formed by the two dimers were characterized by transmission electron microscopy (TEM) and atomic force microscopy (AFM).

Novel Cu(II)-based metal-organic framework STAM-1 as a sulfur host for Li-S batteries

Due to the increasing demand for energy storage devices, the development of high-energy density batteries is very necessary. Lithium-sulfur (Li-S) batteries have gained wide interest due to their particularly high-energy density. However, even this type of battery still needs to be improved. Novel Cu(II)-based metal-organic framework STAM-1 was synthesized and applied as a composite cathode material as a sulfur host in the lithium-sulfur battery with the aim of regulating the redox kinetics of sulfur cathodes. Prepared STAM-1 was characterized by infrared spectroscopy at ambient temperature and after in-situ heating, elemental analysis, X-ray photoelectron spectroscopy and textural properties by nitrogen and carbon dioxide adsorption at - 196 and 0 °C, respectively. Results of the SEM showed that crystals of STAM-1 created a flake-like structure, the surface was uniform and porous enough for electrolyte and sulfur infiltration. Subsequently, STAM-1 was used as a sulfur carrier in the cathode construction of a Li-S battery. The charge/discharge measurements of the novel S/STAM-1/Super P/PVDF cathode demonstrated the initial discharge capacity of 452 mAh g-1 at 0.5 C and after 100 cycles of 430 mAh g-1, with Coulombic efficiency of 97% during the whole cycling procedure at 0.5 C. It was confirmed that novel Cu-based STAM-1 flakes could accelerate the conversion of sulfur species in the cathode material.

Generation of a specific aptamer for accurate detection of sarafloxacin based on fluorescent/colorimetric/SERS triple-readout sensor

Sarafloxacin (SAR), one of the most widely used fluoroquinolone antibiotics, is a serious threat to aquatic environments and human health due to its illegal abuse. Herein, we first screened an aptamer (SAR-1) that specifically binds to SAR using capture-SELEX technology. Based on molecular docking technology, SAR-1 was gradually truncated, and a short SAR-1a with better affinity and specificity was obtained. The optimal SAR-1a was further combined with a Pt nanoparticle (Pt NP)- decorated bimetallic Fe/Co-MOF to fabricate a multimode sensing platform for SAR determination. The Fe/Co-MOF@Pt NPs exhibited excellent peroxidase-like activity, which catalyzed the H2O2-mediated oxidation of 3,3',5,5'-tetramethylbenzidine (TMB), thereby enabling visual detection of SAR. Meanwhile, the generated oxTMB can also produce SERS responses and be used for the SERS detection of SAR. Moreover, the inherent fluorescence property of Fe/Co-MOF@Pt NPs enabled fluorescence detection of SAR. The designed triple-readout aptasensor showed good sensitivity for SAR detection with limits of detection of 0.125 ng/mL (fluorescent mode) and 0.05 ng/mL (colorimetric and SERS mode). The aptamer-based triple-mode sensing platform provided mutual verification of detection results in different output modes, effectively improving the assay accuracy and providing a promising tool for highly sensitive, selective, and accurate determination of SAR in daily life.

Construction of Ideal One-Dimensional Spin Chains by Topochemical Dehydration/Rehydration Route

One-dimensional (1D) Heisenberg antiferromagnets are of great interest due to their intriguing quantum phenomena. However, the experimental realization of such systems with large spin S remains challenging because even weak interchain interactions induce long-range ordering. In this study, we present an ideal 1D S = 5/2 spin chain antiferromagnet achieved through a multistep topochemical route involving dehydration and rehydration. By desorbing three water molecules from (2,2'-bpy)FeF3(H2O)·2H2O (2,2'-bpy = 2,2'-bipyridyl) at 150 °C and then intercalating two water molecules at room temperature (giving (2,2'-bpy)FeF3·2H2O 1), the initially isolated FeF3ON2 octahedra combine to form corner-sharing FeF4N2 octahedral chains, which are effectively separated by organic and added water molecules. Mössbauer spectroscopy reveals significant dynamical fluctuations down to 2.7 K, despite the presence of strong intrachain interactions. Moreover, results from electron spin resonance (ESR) and heat capacity measurements indicate the absence of long-range order down to 0.5 K. This controlled topochemical dehydration/rehydration approach is further extended to (2,2'-bpy)CrF3·2H2O with S = 3/2 1D chains, thus opening the possibility of obtaining other low-dimensional spin lattices.

Pentazolate Anion: A Rare and Preferred Five-Membered Ligand for Constructing Pentasil-Zeolite Topology Architectures

As the fourth full-nitrogen structure, the pentazolate anion (cyclo-N5 - ) was highly coveted for decades. In 2017, the first air-stable non-metal pentazolate salt, (N5 )6 (H3 O)3 (NH4 )4 Cl, was obtained, representing a milestone in this field. As the latest member of the azole family, cyclo-N5 - is comprised of five nitrogen atoms. Although significant attention has been paid to the potential of cyclo-N5 - as an energetic material, its poor thermostability hinders any practical application. However, the unique ring structure and multiple coordination capability of cyclo-N5 - provide a platform for the fabrication of various structures, among which pentasil-zeolite topologies are the most intriguing. In addition, the introduction of structure-directing auxiliaries enables the self-assembly of diverse topological architectures, potentially imparting cyclo-N5 - with the potential to impact wide-ranging areas of coordination chemistry and topology. In this minireview, different pentasil-zeolite topologies based on metal-pentazolate frameworks are evaluated. To date, three zeolitic and zeolite-like topologies have been reported, namely the melanophlogite (MEP), chibaite (MTN), and unj topologies. The MEP topology consists of two nanocages, Na20 N60 and Na24 N60 , whereas the MTN topology contains Na20 N60 and Na28 N80 nanocages. Furthermore, the unj topology features multiple homochiral channels consisting of two helical chains. Various possible strategies for obtaining additional pentasil-zeolite topologies are also discussed.

Ferromagnetism on an atom-thick & extended 2D metal-organic coordination network

Ferromagnetism is the collective alignment of atomic spins that retain a net magnetic moment below the Curie temperature, even in the absence of external magnetic fields. Reducing this fundamental property into strictly two-dimensions was proposed in metal-organic coordination networks, but thus far has eluded experimental realization. In this work, we demonstrate that extended, cooperative ferromagnetism is feasible in an atomically thin two-dimensional metal-organic coordination network, despite only ≈ 5% of the monolayer being composed of Fe atoms. The resulting ferromagnetic state exhibits an out-of-plane easy-axis square-like hysteresis loop with large coercive fields over 2 Tesla, significant magnetic anisotropy, and persists up to TC ≈ 35 K. These properties are driven by exchange interactions mainly mediated by the molecular linkers. Our findings resolve a two decade search for ferromagnetism in two-dimensional metal-organic coordination networks.

How the Support Defines Properties of 2D Metal-Organic Frameworks: Fe-TCNQ on Graphene versus Au(111)

The functionality of 2D metal-organic frameworks (MOFs) is crucially dependent on the local environment of the embedded metal atoms. These atomic-scale details are best ascertained on MOFs supported on well-defined surfaces, but the interaction with the support often changes the MOF properties. We elucidate the extent of this effect by comparing the Fe-TCNQ 2D MOF on two weakly interacting supports: graphene and Au(111). We show that the Fe-TCNQ on graphene is nonplanar with iron in quasi-tetrahedral sites, but on Au(111) it is planarized by stronger van der Waals interaction. The differences in physical and electronic structures result in distinct properties of the supported 2D MOFs. The dz2 center position is shifted by 1.4 eV between Fe sites on the two supports, and dramatic differences in chemical reactivity are experimentally identified using a TCNQ probe molecule. These results outline the limitations of common on-surface approaches using metal supports and show that the intrinsic MOF properties can be partially retained on graphene.

Advances and Applications of Metal-Organic Frameworks (MOFs) in Emerging Technologies: A Comprehensive Review

Metal-organic frameworks (MOFs) that are the wonder material of the 21st century consist of metal ions/clusters coordinated to organic ligands to form one- or more-dimensional porous structures with unprecedented chemical and structural tunability, exceptional thermal stability, ultrahigh porosity, and a large surface area, making them an ideal candidate for numerous potential applications. In this work, the recent progress in the design and synthetic approaches of MOFs and explore their potential applications in the fields of gas storage and separation, catalysis, magnetism, drug delivery, chemical/biosensing, supercapacitors, rechargeable batteries and self-powered wearable sensors based on piezoelectric and triboelectric nanogenerators are summarized. Lastly, this work identifies present challenges and outlines future opportunities in this field, which can provide valuable references.

Lewis Acidic Metal-Organic Framework Assisted Ambient Liquid Extraction Mass Spectrometry Imaging for Enhancing the Coverage of Poorly Ionizable Lipids in Brain Tissue

The spatial distribution of lipidomes in tissues is of great importance in studies of living processes, diseases, and therapies. Mass spectrometry imaging (MSI) has become a critical technique for spatial lipidomics. However, MSI of low-abundance or poorly ionizable lipids is still challenging because of the ion suppression from high-abundance lipids. Here, a metal-organic framework (MOF) Zr6O4(OH)4(1,3,5-Tris(4-carboxyphenyl) benzene)2(triflate)6(Zr6OTf-BTB) was prepared and used for selective on-tissue adsorption of phospholipids to reduce ion suppression from them to poorly ionizable lipids. The results show that Zr6OTf-BTB with strong Lewis acidic sites and a large specific surface area (647.9 m2·g-1) could selectively adsorb phospholipids under 1% FA-MeOH. Adsorption efficiencies of phospholipids are 88.4-144.9 times higher than those of other neutral lipids. Moreover, the adsorption capacity and the adsorption kinetic rate constant of the new material to phospholipids are higher than those of Zr6-BTB (242.72 vs 73.96 mg·g-1, 0.0442 vs 0.0220 g·mg-1·min-1). A Zr6OTf-BTB sheet was prepared by a lamination technique for on-tissue phospholipid adsorption from brain tissue. Then, the tissue section on the Zr6OTf-BTB sheet was directly imaged via ambient liquid extraction-MSI with 1% FA-MeOH as the sampling solvent. The results showed that phospholipids could be 100% removed directly on tissue, and the detection coverage of the Zr6OTf-BTB-enhanced MSI method to ceramides (Cers) and hexosylceramides (HexCers) was increased by 5-26 times compared with direct tissue MSI (26 vs 1 and 17 vs 3). The new method provides an efficient and convenient way to eliminate the ion suppression from phospholipids in MSI, largely improving the detection coverage of low-abundance and poorly ionizable lipids.

Base-Directed Formation of Isostructural Lanthanide-Sulfate-Glutarate Coordination Polymers with Photoluminescence

A series of five isostructural 3D lanthanide-based coordination polymers [LnIII2(H2O)6(glu)(SO4)2]n [Ln = Pr(1), Nd(2), Sm(3), Eu(4), and Gd(5)] was effortlessly obtained within a few minutes via the microwave-heating method. The employment of auxiliary bases, that is, sodium hydroxide, 4,4'-bipyridine, and 1,4-diazabicyclo[2.2.2]octane, led to the formation of the title complex, whereas base-free synthesis yielded a three-dimensional inorganic coordination polymer, [Ln2(H2O)4(SO4)3]n·nH2O, Ln = Nd (2a). The robustness of the synthetic method was illustrated as both microwave-heating and conventional hydrothermal techniques also enabled the formation of a high-crystalline phase-pure complex 1-5. In the structure of 1-5, glutarato (glu2-) and sulfato ligands link dinuclear Ln(III) building units into three-dimensional frames. The glu2- ligands act as tethering linkers, expanding the structure into a neutral 3D coordination network. Hydrogen bonds were found to be the predominant intermolecular interactions in the crystal structures. Photoluminescence of the complex 1-5 was studied.

Enhanced Direct Exchange Interaction and Hybridization by Single-Atom Linkers for High Curie Temperature and Superior Visible-Light Harvesting in Cr3(CN3)2

Designing two-dimensional (2D) ferromagnetic (FM) semiconductors with elevated Curie temperature, high carrier mobility, and strong light harvesting is challenging but crucial to the development of spintronics with multifunctionalities. Herein, we show first-principles computation evidence of the 2D metal-organic framework Kagome ferromagnet Cr3(CN3)2. Monolayer Cr3(CN3)2 is predicted to be an FM semiconductor with a record-high Curie temperature of 943 K owing to the use of a single-atom linker (N), which results in strong direct d-p exchange interaction and hybridization between dyz/xz and pz of Cr and N, as well as excellent matching characteristics in energy and symmetry. The single-atom linker structural feature also leads to notable band dispersion and a relatively high carrier mobility of 420 cm2 V-1 s-1. Moreover, under the in-plane strain, 2D Cr3(CN3)2 can be tuned to possess a strong visible-light-harvesting functionality. These novel properties render monolayer Cr3(CN3)2 a distinct 2D ferromagnet with high potential for the development of multifunctional spintronics.

Lanthanide Metal-Organic Frameworks Exhibiting Fluoro-Bridged Extended Chains: Synthesis, Crystal Structures, and Magnetic Properties

Two fluoro-bridged lanthanide-containing metal-organic frameworks (MOFs) were synthesized using 2,2'-bipyridine-4,4'-dicarboxylic acid (BPDC), a fluorinated modulator, and a lanthanide nitrate. The syntheses of MOFs containing Gd3+ or Tb3+ and a closely related MOF structure containing Ho3+, Gd3+, or Tb3+ are presented. The presence of the fluorinated metal chains in these MOFs is shown through single crystal X-ray diffraction, energy dispersion X-ray spectroscopy, 19F nuclear magnetic resonance, and X-ray photoelectron spectroscopy. Magnetic measurements reveal weak antiferromagnetic exchange between the Ln3+ ions mediated by fluoride anions along the zigzag ladder chains present in the crystal structures of these MOFs.

Pressure effect on the magnetism and crystal structure of magnetoelectric metal-organic framework [CH3NH3][Co(HCOO)3]

[CH3NH3][Co(HCOO)3] is the first perovskite-like metal-organic framework exhibiting spin-driven magnetoelectric effects. However, the high-pressure tuning effects on the magnetic properties and crystal structure of [CH3NH3][Co(HCOO)3] have not been studied. In this work, alongside ac magnetic susceptibility measurements, we investigate the magnetic transition temperature evolution under high pressure. Upon increasing the pressure from atmospheric pressure to 0.5 GPa, TN (15.2 K) remains almost unchanged. Continuing to compress the sample results in TN gradually decreasing to 14.8 K at 1.5 GPa. This may be due to pressure induced changes in the bond distance and bond angle of the O-C-O superexchange pathway. In addition, by using high pressure powder X-ray diffraction and Raman spectroscopy, we conducted in-depth research on the pressure dependence of the lattice parameters and Raman modes of [CH3NH3][Co(HCOO)3]. The increase in pressure gives rise to a phase transition from the orthorhombic Pnma to a monoclinic phase at approximately 6.13 GPa. Our study indicates that high pressure can profoundly alter the crystal structure and magnetic properties of perovskite type MOF materials, which could inspire new endeavors in exploring novel phenomena in compressed metal-organic frameworks.

Metal-organic framework-derived metal oxides for resistive gas sensing: a review

Gas sensors with exceptional sensitivity and selectivity are vital in the real-time surveillance of noxious and harmful gases. Despite this, traditional gas sensing materials still face a number of challenges, such as poor selectivity, insufficient detection limits, and short lifespan. Metal oxides, which are derived from metal-organic framework materials (MOFs), have been widely used in the field of gas sensors because they have a high surface area and large pore volume. Incorporating metal oxides derived from MOFs into gas sensors can improve their sensitivity and selectivity, thus opening up new possibilities for the development of innovative, high-performance gas sensors. This article examines the gas sensing process of metal oxide semiconductors (MOS), evaluates the advances made in the research of different structures of MOF-derived metal oxides in resistive gas sensors, and provides information on their potential applications and future advancements.

Origin of Weak Magnetic Coupling in a Dimanganese(II) Complex Bridged by the Tetrathiafulvalene-Tetrathiolate Radical

Magnetic exchange coupling (J) between different spin centers plays a crucial role in molecule-based magnetic materials. Direct exchange coupling between an organic radical and a metal is frequently stronger than superexchange through diamagnetic ligands, and the strategy of using organic radicals to engender desirable magnetic properties has been an area of active investigation. Despite significant advances and exciting bulk properties, the magnitude of J for radical linkers bridging paramagnetic centers is still difficult to rationally predict. It is thus important to elucidate the features of organic radicals that govern this parameter. Here, we measure J for the tetrathiafulvalene-tetrathiolate radical (TTFtt3-•) in a dinuclear Mn(II) complex. Magnetometry studies show that the antiferromagnetic coupling in this complex is much weaker than that in related Mn(II)-radical compounds, in contrast to what might be expected for the S-based chelating donor atoms of TTFtt. Experimental and computational analyses suggest that this small J coupling may be attributed to poor overlap between Mn- and TTFtt-based magnetic orbitals coupled with insignificant spin density on the coordinating S-atoms. These factors override any expected increase in J from the comparatively strong S-donors. This work elucidates the magnetic coupling properties of the TTFtt3-• radical for the first time and also demonstrates how multiple competing factors must be considered in rationally designing organic radical ligands for molecular-based magnetic compounds.

Smart crystalline framework materials with a triazole carboxylic acid ligand: fluorescence sensing and catalytic reduction of PNP

Triazole polycarboxylic acid ligands are widely employed in the construction of MOFs due to their strong coordination ability and flexible coordination modes. In this work, three novel complexes (Pb(MCTCA)(H2O) (1), Co(HMCTCA)2(H2O)2 (2) and Cu(HMCTCA)2(H2O)2 (3)) based on the H2MCTCA ligand (5-methyl-1-(4-carboxyl)-1H-1,2,3-triazole-4-carboxylic acid) were successfully synthesized under hydrothermal conditions, respectively. X-ray single crystal structure analysis shows that complex 1 is a 3D network structure, where the central metal Pb(II) is six coordinated to form deformed triangular prism geometry. The complexes 2 and 3 are both 2D layer supramolecular structures connected through intermolecular hydrogen, where the central metals (Co/Cu) are six coordinated to form octahedral configuration geometry. Based on functional properties, it is found that complex 1 exhibits excellent detection ability for small-molecule drugs (azithromycin, colchicine and balsalazide disodium) and actinide cations (Th4+ and UO22+) within a lower concentration range without interference from other components. In particular, the detection limits of three small-molecule drugs are all lower than 0.30 μM. In addition, complexes 2 and 3 exhibited excellent catalytic reduction performance toward p-nitrophenol (PNP), with a reduction efficiency exceeding 98%. These experimental results evidence that complexes 1-3 have potential application prospects in fluorescence sensing and catalytic reduction.

A new series of magnetic and luminescent layered hybrid materials obtained from thianthrene phosphonic acid: M(H2O)PO3-S2C12H7 (M = Cu, Zn) and M(H2O)2(PO2OH-S2C12H7)2 (M = Mn, Co)

Four new metallophosphonates with the chemical formulae M(H2O)PO3-S2C12H7 (M = Cu, Zn) and M(H2O)2(PO2OH-S2C12H7)2 (M = Mn, Co) were synthesized using a hydrothermal route from the original bent rigid thianthrene-2-ylphosphonic acid (TPA). This organic precursor crystallizes in a non-centrosymmetric space group P212121 and presents a unique bent geometry due to the presence of two sulfur atoms in its rigid platform architecture. Obtained as single crystal and polycrystalline powders, the structures of the four hybrid materials were solved using X-ray diffraction on single crystals in a monoclinic P21/c space group. These compounds adopt a lamellar structure consisting of one inorganic subnetwork alternating with a 'sawtooth' double organic -S2C12H7 subnetwork. The inorganic layers of these compounds are made of (PO3C) or partially deprotonated (PO2OHC) tetrahedra connected by the apices to isolated ZnO3(H2O) tetrahedra, Cu2O6(H2O)2 copper dimers and cobalt and manganese MO4(H2O)2 octahedra, where the latter two exhibit an isotype structure. Thermogravimetric analysis was performed to confirm the amount of water molecules present in the formula, to track the dehydration process of the structures, and to evaluate their thermal stability. The magnetic properties of the copper, cobalt, and manganese-based materials were investigated from 2 K to 300 K by using a SQUID magnetometer revealing dominant antiferromagnetic interactions with Weiss temperatures of -8.0, -10, and -1 K, respectively. These magnetic behaviors were further corroborated by first-principles simulations based on Density Functional Theory (DFT). Finally, the absorption and photoluminescence properties of both the ligand and hybrid materials were investigated, revealing diverse excitation and recombination mechanisms. The organic moiety based on thianthrene significantly influenced the absorption and emission, with additional peaks attributed to transition metals. Singlet and triplet states recombination were observed, accompanied by an unidentified quenching mechanism affecting the triplet state lifetime.

Bifunctional Cu(II)-based 2D coordination polymer and its composite for high-performance photocatalysis and electrochemical energy storage

Coordination polymers (CPs) have been widely proven as sacrificial electrode materials for energy storage applications because of their high porosity, specific surface area and tunable structural topology. In this work, a new 2D Cu(II)-based CP, formulated as [Cu2(btc)(μ-Cl)2(H2O)4]n (CP-1) (H3btc = benzene-1,3,5-tricarboxylic acid), fabrication of copper oxide nanoparticles (CuO NPs) and its composite (CuO@CP-1) were successfully synthesized using solvothermal, precipitation and mechanochemical grinding approaches. Single-crystal X-ray analysis authenticated a two-dimensional (2D) layered network of CP-1. Further, CP-1, CuO NPs and composite were characterized by diffraction (Powder-XRD), spectroscopic (FTIR), microscopic (SEM), and thermal (TGA) techniques. The porosity and surface behavior of CP-1 and the composite were demonstrated using BET analyzer. Topological simplification of CP-1 shows a 3-c connected hcb periodic net. The photocatalytic behavior of CP-1 was examined over methyl red (MR) dye in the presence of sunlight and showed a promising degradation efficiency of 96.80%. The electrochemical energy storage properties of CP-1, CuO NPs and composite were investigated using cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) analysis under aqueous 1 M H2SO4 electrolyte. The electrochemical results show better charge storage performance of CP-1 with a specific capacitance of 602.25 F g-1 at 1 A g-1 current density by maintaining a retention of up to 84.51% after 5000 cycles at 10 A g-1 current density. Comparative electrochemical studies reveal that CP-1 is a promising electrode material for energy storage.

Two-Dimensional Metal-Organic Frameworks Towards Spintronics

The intrinsic properties of predesignable topologies and tunable electronic structures, coupled with the increase of electrical conductivity, make two-dimensional metal-organic frameworks (2D MOFs) highly prospective candidates for next-generation electronic/spintronic devices. In this Minireview, we present an outline of the design principles of 2D MOF-based spintronics materials. Then, we highlight the spin-transport properties of 2D MOF-based organic spin valves (OSVs) as a notable achievement in the progress of 2D MOFs for spintronics devices. After that, we discuss the potential for spin manipulation in 2D MOFs with bipolar magnetic semiconductor (BMS) properties as a promising field for future research. Finally, we provide a brief summary and outlook to encourage the development of novel 2D MOFs for spintronics applications.

Biodegradable Nanofiber/Metal-Organic Framework/Cotton Air Filtration Membranes Enabling Simultaneous Removal of Toxic Gases and Particulate Matter

The typical filters that protect us from harmful components, such as toxic gases and particulate matter (PM), are made from petroleum-based materials, which need to be replaced with other environmentally friendly materials. Herein, we demonstrate a route to fabricate biodegradable and dual-functional filtration membranes that effectively remove PM and toxic gases. The membrane was integrated using two layers: (i) cellulose-based nanofibers for PM filtration and (ii) metal-organic framework (MOF)-coated cotton fabric for removal of toxic gases. Zeolitic imidazolate framework (ZIF-8) was grown from the surface of the cotton fabric by the treatment of cotton fabric with an organic precursor solution and subsequent immersion in an inorganic precursor solution. Cellulose acetate nanofibers (NFs) were deposited on the MOF-coated cotton fabric via electrospinning. At the optimal thickness of the NF layer, the quality factor of 18.8 × 10-2 Pa-1 was achieved with a filtration efficiency of 93.1%, air permeability of 19.0 cm3/cm2/s, and pressure drop of 14.2 Pa. The membrane exhibits outstanding gas adsorption efficiencies (>99%) for H2S, formaldehyde, and NH3. The resulting membrane was highly biodegradable, with a weight loss of 62.5% after 45 days under standard test conditions. The proposed strategy should provide highly sustainable material platforms for practical multifunctional membranes in personal protective equipment.

Tetraethylenepentamine-derived carbon dots and tetraethylenepentamine co-immobilized silica stationary phase for hydrophilic interaction chromatography

In this work, tetraethylenepentamine (TEPA) was used as precursor and reaction medium to prepare tetraethylenepentamine-functionalized carbon dots (TEPACDs), the resultant mixture was subsequently silanized and then grafted on the surface of bare silica. The obtained tetraethylenepentamine-functionalized carbon dots and tetraethylenepentamine co-modified silica stationary phase (Sil-TEPA/CDs) was characterized by multiple ways, such as Fourier transformed infrared spectroscopy (FTIR), elemental analysis and transmission electron microscope, which revealed the successful preparation of the mixed stationary phase and higher density of functional groups on co-modified stationary phase than precursor single-modified stationary phase. The synergistic effect of TEPACDs and TEPA was proved by comparing the separation performance of Sil-TEPA/CDs and Sil-TEPA toward amino acids, nucleosides, and nucleobases, which distinctly enhanced the selectivity of Sil-TEPA/CDs. Thus, 12 nucleosides and nucleobases and 11 amino acids was nicely separated on Sil-TEPA/CDs. By study the influences of the changes of mobile phase composition, mobile phase buffer concentration and buffer pH on the retention behaviors of Sil-TEPA and Sil-TEPA/CDs, it was found that both hydrophilic partitioning and adsorption of analytes on Sil-TEPA/CDs were enhanced benefit from the co-existence of TEPA and TEPACDs, which provided the analytes better separation performance. By comparing the column quality of Sil-TEPA/CDs with four commercially available columns, Sil-TEPA/CDs exhibited the best peak asymmetry of 0.98, and second best column efficiency of 43895 m-1 using guanosine as analyte. The RSD (n = 9) of the retention times of five selected analytes on Sil-TEPA/CDs were within 0.30-0.61% during 40 h of continuously elution, which implied excellent stability of prepared packing material.

Syntheses, Structures, and Magnetic Properties of Three Cyano-Bridged FeII-MoIII Single-Molecule Magnets

Three new cyano-bridged FeII-MoIII complexes assembled from the [MoIII(CN)7]4- unit, FeII ions, and three pentadentate N3O2 ligands, namely {[Fe2H3(dapab)2][Mo(CN)6]}n·2H2O·3.5MeCN (1), [Fe(H2dapb)(H2O)][Fe(Hdapb)(H2O)][Mo(CN)6]·4H2O·3MeCN (2), and [Fe(H2dapba)(H2O)]2[Mo(CN)7]·6H2O (3) (H2dapab = 2,6-diacetylpyridine bis(2-aminobenzoylhydrazone), H2dapb = 2,6-diacetylpyridine bis(benzoylhydrazone), H2dapba = 2,6-diacetylpyridine bis(4-aminobenzoylhydrazone)), have been synthesized and characterized. Single-crystal structure analyses suggest that complex 1 contains a one-dimensional (1D) chain structure where two FeII ions are bridged by the in situ generated [MoIII(CN)6]3- unit through two trans-cyanide groups into trinuclear Fe2IIMoIII clusters that are further linked by the amino of the ligand into an infinite chain. Complexes 2 and 3 are cyano-bridged Fe2IIMoIII trinuclear clusters with two FeII ions connected by the [MoIII(CN)6]3- and [MoIII(CN)7]4- units, respectively. Direct current magnetic studies confirmed the ferromagnetic interactions between the cyano-bridged FeII and MoIII centers and significant easy-axis magnetic anisotropy for all three complexes. Furthermore, complexes 1-3 exhibit slow magnetic relaxation under a zero dc field, with relaxation barriers of 42.3, 21.6, and 14.4 K, respectively, making them the first examples of cyano-bridged FeII-MoIII single-molecule magnets.

Covalent connections between metal-organic frameworks and polymers including covalent organic frameworks

Hybrid composite materials combining metal-organic frameworks (MOFs) and polymers have emerged as a versatile platform for a broad range of applications. The crystalline, porous nature of MOFs and the flexibility and processability of polymers are synergistically integrated in MOF-polymer composite materials. Covalent bonds, which form between two distinct materials, have been extensively studied as a means of creating strong molecular connections to facilitate the dispersion of "hard" MOF particles in "soft" polymers. Numerous organic transformations have been applied to post-synthetically connect MOFs with polymeric species, resulting in a variety of covalently connected MOF-polymer systems with unique properties that are dependent on the characteristics of the MOFs, polymers, and connection modes. In this review, we provide a comprehensive overview of the development and strategies involved in preparing covalently connected MOFs and polymers, including recently developed MOF-covalent organic framework composites. The covalent bonds, grafting strategies, types of MOFs, and polymer backbones are summarized and categorized, along with their respective applications. We highlight how this knowledge can serve as a basis for preparing macromolecular composites with advanced functionality.

Fixing CO2 under Atmospheric Conditions and Dual Functional Heterogeneous Catalysis Employing Cu MOFs: Polymorphism, Single-Crystal-to-Single-Crystal (SCSC) Transformation and Magnetic Studies

New copper compounds, [Cu(C14H8O6)(C10H8N2)(H2O)] (1), [Cu(C14H8O6)(C10H8N2)(H2O)]·(C3H7ON)2 (2), [Cu(C14H8O6)(C10H8N2)(H2O)2]·(C3H7ON) (3), [Cu(C14H8O6)(C10H8N4)] (4), and [Cu(C14H8O6)(C10H8N4)]·(H2O) (5), were prepared employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 4,4'-bipyridine (1-3) and 4,4'-azopyridine (4-5) as the secondary ligands. Single-crystal studies indicated that compounds 1-4 have two-dimensional layer structures and compound 5 has a three-dimensional structure. Compounds 1-3 were isolated from the same reaction mixture but by varying the time of reaction. The framework structures of compounds 1-3 are similar and may be considered as polymorphic structures. Compounds 4 and 5 can also be considered polymorphic with a change in dimensionality of the structure. Compounds 1-3 can be formed through a single-crystal-to-single-crystal transformation under a suitable solvent mixture. The Cu center was explored for the Lewis acid-catalyzed cycloaddition reaction of epoxide and CO2 under ambient conditions in a solventless condition and also for the synthesis of propargylamine derivatives by three-component coupling reactions (A3 coupling) in a DCM medium. The Lewis basic functionality of the MOF (-N═N- group) has been explored for the Henry reaction (aldol condensation) in a solventless condition. In all of the catalytic reactions, good yields and recyclability were observed. The magnetic studies indicated that compounds 1 and 4 have antiferromagnetic interactions and compound 5 has ferromagnetic interactions. The present studies illustrated the rich diversity that the copper-containing compounds exhibit in extended framework structures.

A Paramagnetic Compass Based on Lanthanide Metal-Organic Framework

Macroscopic compass-like magnetic alignment at low magnetic fields is natural for ferromagnetic materials but is seldomly observed in paramagnetic materials. Herein, we report a "paramagnetic compass" that magnetically aligns under ∼mT fields based on the single-crystalline framework constructed by lanthanide ions and organic ligands (Ln-MOF). The magnetic alignment is attributed to the Ln-MOF's strong macroscopic anisotropy, where the highly-ordered structure allows the Ln-ions' molecular anisotropy to be summed according to the crystal symmetry. In tetragonal Ln-MOFs, the alignment is either parallel or perpendicular to the field depending on the easiest axis of the molecular anisotropy. Reversible switching between the two alignments is realized upon the removal and re-adsorption of solvent molecules filled in the framework. When the crystal symmetry is lowered in monoclinic Ln-MOFs, the alignments become even inclined (47°-66°) to the field. These fascinating properties of Ln-MOFs would encourage further explorations of framework materials containing paramagnetic centers.

An amine decorated MOF for direct capture of CO2 from ambient air

A Zn(II)-based metal-organic framework (MOF) was synthesized by the self-assembly of the dicarboxylate ligand terephthalic acid (TPA), 2-aminoterephthalic acid (NH2-TPA) and N-donor auxiliary ligand 1,4-bis(4-pyridinylmethyl)piperazine (bpmp) using Zn(NO3)2·6H2O under hydrothermal conditions. {[Zn(TPA)0.5(NH2TPA)0.5(bpmp)]·DMF·7H2O}n (framework 1) has an sra topology with a BET surface area of 756 m2 g-1. The microporous nature of the framework is apparent from the significant CO2 adsorption capacities observed at various temperatures: 57 cc g-1 at 283 K, 46 cc g-1 at 293 K, 37 cc g-1 at 303 K, and 30 cc g-1 at 313 K. The considerable CO2 adsorption may be caused by the existence of free carboxylate and amine substituents that interact with the gas molecules and micropores. At room temperature, the activated MOF readily converts CO2 into cyclic carbonates when a suspension of the MOF is bubbled with ambient air and different epoxides under solvent-free conditions. The amine groups located within the pores of the MOF interact with CO2 molecules, enhancing their sorption and conversion to cyclic carbonates. However, due to interpenetration within framework 1, only smaller size epoxides can be accommodated and converted to cyclic carbonates in good yields. Additionally, the effectiveness of the catalyst is further confirmed by the positive outcomes obtained from the hot filtration control test. Grand canonical Monte Carlo (GCMC) molecular simulations were utilized to gain a better understanding of molecular interactions. GCMC results are in line with the experiments. The substantial adsorption of CO2 can be ascribed to the strong intermolecular interactions that occur between the amine groups within the framework and the CO2 molecules.

Dual-Functional Eu-Metal-Organic Framework with Ratiometric Fluorescent Broad-Spectrum Sensing of Benzophenone-like Ultraviolet Filters and High Proton Conduction

The construction of attractive dual-functional lanthanide-based metal-organic frameworks (Ln-MOFs) with ratiometric fluorescent detection and proton conductivity is significant and challenging. Herein, a three-dimensional (3D) Eu-MOF, namely, [Eu4(HL)2(SBA)4(H2O)6]·9H2O, has been hydrothermally synthesized with a dual-ligand strategy, using (4-carboxypiperidyl)-N-methylenephosphonic acid (H3L = H2O3PCH2-NC5H9-COOH) and 4-sulfobenzoic acid monopotassium salt (KHSBA = KO3SC6H4COOH) as organic linkers. Eu-MOF showed ratiometric fluorescent broad-spectrum sensing of benzophenone-like ultraviolet filters (BP-like UVFs) with satisfactory sensitivity, selectivity, and low limits of detection in water/ethanol (1:1, v/v) solutions and real urine systems. A portable test paper was prepared for the convenience of actual detection. The potential sensing mechanisms were thoroughly analyzed by diversified experiments. The synergistic effect of the forbidden energy transfer from the ligand to Eu3+, the internal filtration effect (IFE), the formation of a complex, and weak interactions between the KHSBA ligand and BP-like UVFs is responsible for the ratiometric sensing effect. Meanwhile, Eu-MOF displayed relatively high proton conductivity of 2.60 × 10-4 S cm-1 at 368 K and 95% relative humidity (RH), making it a potential material for proton conduction. This work provides valuable guidance for the facile and effective design and construction of multifunctional Ln-MOFs with promising performance.

Creation of a Field-Induced Co(II) Single-Ion Magnet by Doping into a Zn(II) Diamagnetic Metal-Organic Framework

The combination of single-ion magnets (SIMs) and metal-organic frameworks (MOFs) is expected to produce new quantum materials. The principal issue to be solved in this regard is the development of new strategies for the synthesis of SIM-MOFs. This work demonstrates a new simple strategy for the synthesis of SIM-MOFs where a diamagnetic MOF is used as the framework into which the SIM sites are doped. 1, 0.5, and 0.2 mol% of the Co(II) ions are doped into the Zn(II) sites of [CH6 N3 ][ZnII (HCOO)3 ]. The doped Co(II) sites in the MOFs perform as SIM with a positive D term of zero-field splitting. The longest magnetic relaxation time is 150 ms (0.2 mol% Co) at 1.8 K under a static field of 0.1 T. Temperature dependency of the relaxation time suggests suppressing magnetic relaxation by reduction of spin-spin interaction upon doping in the rigid framework. Thus, this work represents a proof of concept for the creation of a single-ion doped magnet in the MOF. This simple synthetic strategy will be widely applied for the creation of quantum magnetic materials.

Properties of Aliphatic Ligand-Based Metal-Organic Frameworks

Ligands with a purely aliphatic backbone are receiving rising attention in the chemistry of coordination polymers and metal-organic frameworks. Such unique features inherent to the aliphatic bridges as increased conformational freedom, non-polarizable core, and low light absorption provide rare and valuable properties for their derived MOFs. Applications of such compounds in stimuli-responsive materials, gas, and vapor adsorbents with high and unusual selectivity, light-emitting, and optical materials have extensively emerged in recent years. These properties, as well as other specific features of aliphatic-based metal-organic frameworks are summarized and analyzed in this short critical review. Advanced characterization techniques, which have been applied in the reported works to obtain important data on the crystal and molecular structures, dynamics, and functionalities, are also reviewed within a general discussion. In total, 132 references are included.

Tuning Crystal Packing and Magnetic Properties in a Series of [Dy12] Metallocubanes Based on Azobenzene Derivatives of Salicylic Acid

A series of four new Dy₁₂ dodecanuclear clusters based on azobenzene derivative ligands of salicylic acid (L1-L4) has been synthesized and characterized in the crystalline phase using X-ray diffraction on single crystal and powder, IR spectroscopy, elemental analysis, and DSC-TGA methods. It was revealed that all obtained clusters exhibit the formation of the similar metallic cluster nodes, as vertex-sharing heterocubanes, obtained from four Dy³⁺ cations, three bridging hydroxyl groups, and O atoms from the salicylic ligands. The coordination geometry around the Dy(III) centers has been carefully analyzed. Whereas Dy₁₂-L1 and Dy₁₂-L2 with L1 and L2 containing Me and OMe groups in para positions of the phenyl rings, respectively, form similar porous 3D diamond-like molecular networks due to CH-π interactions, for Dy₁₂-L3 with L3 bearing NO₂-electron-withdrawing group, the generation of 2D molecular grids assembled by π-π staking is observed, and for Dy₁₂-L4 with L4 bearing phenyl substituent, 3D hexagonal channels have been generated. The complexes Dy₁₂-L1, Dy₁₂-L2, and Dy₁₂-L3 exhibit a zero-field slow magnetic relaxation effect. After UV irradiation of Dy₁₂-L1, a decrease of the magnetic anisotropy energy barrier displaying the possibility of control over magnetic properties by the external stimulus has been observed.

All-electron APW+lo calculation of magnetic molecules with the SIRIUS domain-specific package

We report APW+lo (augmented plane wave plus local orbital) density functional theory (DFT) calculations of large molecular systems using the domain specific SIRIUS multi-functional DFT package. The APW and FLAPW (full potential linearized APW) task and data parallelism options and the advanced eigen-system solver provided by SIRIUS can be exploited for performance gains in ground state Kohn-Sham calculations on large systems. This approach is distinct from our prior use of SIRIUS as a library backend to another APW+lo or FLAPW code. We benchmark the code and demonstrate performance on several magnetic molecule and metal organic framework systems. We show that the SIRIUS package in itself is capable of handling systems as large as a several hundred atoms in the unit cell without having to make technical choices that result in the loss of accuracy with respect to that needed for the study of magnetic systems.

Dynamical Behavior of Pure Spin Current in Organic Materials

Growing concentration on the novel information processing technology and low-cost, flexible materials make the spintronics and organic materials appealing for the future interdisciplinary investigations. Organic spintronics, in this context, has arisen and witnessed great advances during the past two decades owing to the continuous innovative exploitation of the charge-contained spin polarized current. Albeit with such inspiring facts, charge-absent spin angular momentum flow, namely pure spin currents (PSCs) are less probed in organic functional solids. In this review, the past exploring journey of PSC phenomenon in organic materials are retrospected, including non-magnetic semiconductors and molecular magnets. Starting with the basic concepts and the generation mechanism for PSC, the representative experimental observations of PSC in the organic-based networks are subsequently demonstrated and summarized, by accompanying explicit discussion over the propagating mechanism of net spin itself in the organic media. Finally, future perspectives on PSC in organic materials are illustrated mainly from the material point of view, including single molecule magnets, complexes for the organic ligands framework as well as the lanthanide metal complexes, organic radicals, and the emerging 2D organic magnets.

Dual-quenching mechanisms in electrochemiluminescence immunoassay based on zinc-based MOFs of ruthenium hybrid for D-dimer detection

The successful application of electrochemiluminescence (ECL) in immunoassay for clinical diagnosis requires improving sensitivity and accuracy. Herein was reported an ECL analytical model based zinc-based metal-organic frameworks of ruthenium hybrid (RuZn MOFs) as the signal emitter. To enlarge the output difference, the quenching effect of three different noble metal nanoparticles included palladium seeds (Pd_seeds), palladium octahedrons (Pd_oct), and Pt-based palladium (Pd@Pt_oct) core-shell were researched. Among them, Pd@Pt_oct core-shell possessed higher activity and improved durability than Pd-only (NPs), they could load more protein macromolecules amicably and stabilized in the analysis system. Furthermore, since the charge redistribution owing to the hybridization of the Pt and Pd atoms in Pd@Pt_oct, it could generate the electron flow maximumly from the emitter RuZn MOFs to Pd@Pt_oct and result in the enhancement of quenching ECL. And the UV absorption of noble metal nanoparticles overlapped with the ECL emission of RuZn MOFs to varying degrees, which caused the behavior of resonance energy transfer (RET) reaction at the same time. This would greatly promote the sensitivity of this ECL system compared with the traditional single quenching mechanism. Based on this, a signal-off immunsensor was constructed to sensitive detection of D-dimer with linearity range from 0.001 to 200 ng mL^-1, limit of detection (LOD) was 0.20 pg mL^-1 and provide a further theoretical basis for the clinical application of ECL technology.

Permanent Porosity in the Room-Temperature Magnet and Magnonic Material V(TCNE)2

Materials that simultaneously exhibit permanent porosity and high-temperature magnetic order could lead to advances in fundamental physics and numerous emerging technologies. Herein, we show that the archetypal molecule-based magnet and magnonic material V(TCNE)₂ (TCNE = tetracyanoethylene) can be desolvated to generate a room-temperature microporous magnet. The solution-phase reaction of V(CO)₆ with TCNE yields V(TCNE)₂·0.95CH₂Cl₂, for which a characteristic temperature of T* = 646 K is estimated from a Bloch fit to variable-temperature magnetization data. Removal of the solvent under reduced pressure affords the activated compound V(TCNE)₂, which exhibits a T* value of 590 K and permanent microporosity (Langmuir surface area of 850 m²/g). The porous structure of V(TCNE)₂ is accessible to the small gas molecules H₂, N₂, O₂, CO₂, ethane, and ethylene. While V(TCNE)₂ exhibits thermally activated electron transfer with O₂, all the other studied gases engage in physisorption. The T* value of V(TCNE)₂ is slightly modulated upon adsorption of H₂ (T* = 583 K) or CO₂ (T* = 596 K), while it decreases more significantly upon ethylene insertion (T* = 459 K). These results provide an initial demonstration of microporosity in a room-temperature magnet and highlight the possibility of further incorporation of small-molecule guests, potentially even molecular qubits, toward future applications.

Broad Electronic Modulation of Two-Dimensional Metal-Organic Frameworks over Four Distinct Redox States

Two-dimensional (2D) inorganic materials have emerged as exciting platforms for (opto)electronic, thermoelectric, magnetic, and energy storage applications. However, electronic redox tuning of these materials can be difficult. Instead, 2D metal-organic frameworks (MOFs) offer the possibility of electronic tuning through stoichiometric redox changes, with several examples featuring one to two redox events per formula unit. Here, we demonstrate that this principle can be extended over a far greater span with the isolation of four discrete redox states in the 2D MOFs Li_xFe₃(THT)₂ (x = 0-3, THT = triphenylenehexathiol). This redox modulation results in 10,000-fold greater conductivity, p- to n-type carrier switching, and modulation of antiferromagnetic coupling. Physical characterization suggests that changes in carrier density drive these trends with relatively constant charge transport activation energies and mobilities. This series illustrates that 2D MOFs are uniquely redox flexible, making them an ideal materials platform for tunable and switchable applications.

Spin-Resolved Band Structure of Hoffman Clathrate [Fe(pz)2Pt(CN)4] as an Essential Tool to Predict Optical Spectra of Metal-Organic Frameworks

Paramount spin-crossover properties of the 3D-Hoffman metalorganic framework (MOF) [Fe(pz)₂Pt(CN)₄] are generally described on the basis of the ligand field theory, which provides adequate insight into theoretical and simulation analysis of spintronic complexes. However, the ligand field approximation does not take into account the 3D periodicity of the actual complex lattice and surface effects and therefore cannot predict a full-scale periodic structure without utilizing more advanced methods. Therefore, in this paper, the electronic properties of the exemplar MOF were analyzed from the band structure perspective in low-spin (LS) and high-spin (HS) states. The density-of-states spectra determined for both spin-up and spin-down electrons of Fe d⁶ orbitals indicate spin-orbital splitting and delocalization for HS due to spin polarization in the iron atom ligand field. Presence of the surface states in the real crystal causes a red shift of the metal-metal charge transfer (MMCT) and metal-ligand charge transfer (MLCT) peaks for both HS and LS states. The addition of residual water molecules and disorder among the pyrazine rings reveal additional influences on the positions of the pyrazine band and, therefore, on the absorption spectra of the crystal. The results show a magnification of the peak correlated with the MLCT in the HS state and a significant red shift of the LS characteristic absorption band. The presented approach involving band structure analysis delivers a more complete image of the electronic properties of the [Fe(pz)₂Pt(CN)₄] crystalline network and can be a landmark for insightful studies of other MOFs.