Fluorocarbon Refrigerants and their Syntheses: Past to Present

Integrating redox-electrodialysis and electrosorption for the removal of ultra-short- to long-chain PFAS

A major challenge in per- and polyfluoroalkyl substances (PFAS) remediation has been their structural and chemical diversity, ranging from ultra-short to long-chain compounds, which amplifies the operational complexity of water treatment and purification. Here, we present an electrochemical strategy to remove PFAS from ultra-short to long-chain PFAS within a single process. A redox-polymer electrodialysis (redox-polymer ED) system leverages a water-soluble redox polymer with inexpensive nanofiltration membranes, facilitating the treatment of varied chain lengths of PFAS without membrane fouling. Our approach combines both ion migration by electrodialysis (for PFAS with chain lengths ≤C4) and electrosorption strategies (for PFAS with chain lengths ≥C6) to eliminate approximately 90% of ultra-short-, short-chain, and long-chain PFAS. At the same time, we achieve continuous desalination of the source water down to potable water level. The redox-polymer ED exhibits remarkable PFAS removal in real source water scenarios, including from matrices with 10,000 times higher salt concentrations, as well as secondary effluents from wastewaters. Additionally, the removed PFAS is mineralized with a defluorination performance between 76-100% by electrochemical oxidation, highlighting the viability of integrating the separation step with a reactive degradation process.

Adsorption of difluoromethane (HFC-32) and pentafluoroethane (HFC-125) and their mixtures in silicalite-1: An experimental and Monte Carlo simulation study

Hydrofluorocarbons are a class of fluorinated molecules used extensively in residential and industrial refrigeration systems. This study examines the potential of using adsorption processes with the silicalite-1 zeolite to separate a mixture of difluoromethane (CH2F2, HFC-32) and pentafluoroethane (CF3CF2H, HFC-125) at various concentrations. Pure adsorption data were measured using a XEMIS gravimetric microbalance, whereas binary data were determined using the Integral Mass Balance method. Grand canonical Monte Carlo molecular simulations were performed with the Cassandra package. We found that the results from molecular simulations are in satisfactory agreement with experimental loading measurements. Moreover, we show that ideal adsorbed solution theory could not quantitatively match the experimental or computational measurements of binary adsorption or selectivity. Molecular simulations show that refrigerant molecules do not have a uniform distribution in the zeolite framework.

Boosting Catalytic and Anti-fluorination Performance of the Ru/Vanadia-Titania Catalyst for the Oxidative Destruction of Freon by Sulfuric Acid Modification

Chlorofluorocarbons (CFCs) exert a strong greenhouse effect and constitute the largest contributor to ozone depletion. Catalytic removal is considered an effective pathway for eliminating low-concentration CFCs under mild conditions. The key issue is the easy deactivation of the catalysts due to their surface fluorination. We herein report a comparative investigation on catalytic dichlorodifluoromethane (CFC-12) removal in the absence or presence of water over the sulfuric-acid-modified three-dimensionally ordered macroporous vanadia-titania-supported Ru (S-Ru/3DOM VTO) catalysts. The S-Ru/3DOM VTO catalyst exhibited high activity (T90% = 278 °C at space velocity = 40 000 mL g-1 h-1) and good stability within 60 h of on-stream reaction in the presence of 1800 ppm of water due to the improvements in acid site amount and redox ability that promoted the adsorption of CFC-12 and the activation of C-F bonds. Compared with the case under dry conditions, catalytic performance for CFC-12 removal was better over the S-Ru/3DOM VTO catalyst in the presence of water. Water introduction mitigated surface fluorination by the replenishment of hydroxyl groups, inhibited the formation of halogenated byproducts via the surface fluorine species cleaning effect, and promoted the reaction pathway of COX2 (X = Cl/F) → carboxylic acid → CO2.

Engineered Nanoporous Frameworks for Adsorption Cooling Applications

The energy demand for traditional vapor-compressed technology for space cooling continues to soar year after year due to global warming and the increasing human population's need to improve living and working conditions. Thus, there is a growing demand for eco-friendly technologies that use sustainable or waste energy resources. This review discusses the properties of various refrigerants used for adsorption cooling applications followed by a brief discussion on the thermodynamic cycle. Next, sorbents traditionally used for cooling are reviewed to emphasize the need for advanced capture materials with superior properties to improve refrigerant sorption. The remainder of the review focus on studies using engineered nanoporous frameworks (ENFs) with various refrigerants for adsorption cooling applications. The effects of the various factors that play a role in ENF-refrigerant pair selection, including pore structure/dimension/shape, morphology, open-metal sites, pore chemistry and possible presence of defects, are reviewed. Next, in-depth insights into the sorbent-refrigerant interaction, and pore filling mechanism gained through a combination of characterization techniques and computational modeling are discussed. Finally, we outline the challenges and opportunities related to using ENFs for adsorption cooling applications and provide our views on the future of this technology.

Ionic Liquids for the Separation of Fluorocarbon Refrigerant Mixtures

This review discusses the research being performed on ionic liquids for the separation of fluorocarbon refrigerant mixtures. Fluorocarbon refrigerants, invented in 1928 by Thomas Midgley Jr., are a unique class of working fluids that are used in a variety of applications including refrigeration. Fluorocarbon refrigerants can be categorized into four generations: chlorofluorocarbons, hydrochlorofluorocarbons, hydrofluorocarbons, and hydrofluoroolefins. Each generation of refrigerants solved a key problem from the previous generation; however, each new generation has relied on more complex mixtures that are often zeotropic, near azeotropic, or azeotropic. The complexity of the refrigerants used and the fact that many refrigerants form azeotropes when mixed makes handling the refrigerants at end of life extremely difficult. Today, less than 3% of refrigerants that enter the market are recycled. This is due to a lack of technology in the refrigerant reclaim market that would allow for these complex, azeotropic refrigerant mixtures to be separated into their components in order to be effectively reused, recycled, and if needed repurposed. As the market for recovering and reclaiming refrigerants continues to grow, there is a strong need for separation technology. Ionic liquids show promise for separating azeotropic refrigerant mixtures as an entrainer in extractive distillation process. Ionic liquids have been investigated with refrigerants for this application since the early 2000s. This review will provide a comprehensive summary of the physical property measurements, equations of state modeling, molecular simulations, separation techniques, and unique materials unitizing ionic liquids for the development of an ionic-liquid-based separation process for azeotropic refrigerant mixtures.

Palladium-Catalyzed Carbonylation Reaction of Indole/Pyrrole Involving HCFO-1233zd (E)

3-Indole-3-one is a key intermediate in the synthesis of many drugs and plays an important role in synthetic chemistry and biochemistry. A new method for synthesizing trifluoromethylated 3-indoleketones by Pd(0)-catalyzed carbonylation was introduced. In the absence of additives, 1-chloro-3,3,3-trifluoropropyl (an inexpensive and environmentally friendly synthetic block of trifluoromethyl) reacts with indole and carbon monoxide to generate trifluoromethylindole ketones with good yields, regioselectivity, and chemical selectivity; furthermore, the products exhibit strong resistance to basic functional groups, such as alkynes, aldehydes, and esters. In addition to the conversion of indole compounds into corresponding products, pyrrole and heteroindole may be suitable for corresponding chemical transformations. This study provides a synthetic method for the further construction of trifluoromethylated 3-indole ketones.

Synthetic Utilization of 2H-Heptafluoropropane: Ionic 1,4-Addition to Electron-Deficient Carbon-Carbon Unsaturated Bonds

We have found a novel method for introducing heptafluoro-2-propyl CF(CF3)2 groups into carbon-carbon unsaturated bonds via a nucleophilic reaction using 2H-heptafluoropropane as the source of CF(CF3)2 groups. The reaction involves the nucleophilic addition of a heptafluoro-2-propyl anion, generated by treating 2H-heptafluoropropane with a fluoride ion, to various electron-deficient unsaturated compounds. This allows the easy synthesis of various aliphatic compounds containing heptafluoro-2-propyl groups.

Picking Two out of Three: Defluorinative Annulation of Trifluoromethyl Alkenes for the Synthesis of Monofluorinated Carbo- and Heterocycles

The increasing demand of organofluorine compounds in medicine, agriculture, and materials sciences makes sophisticated methods for their synthesis ever more necessary. Nowadays, not only the C-F bond formation but also the selective C-F bond cleavage of readily available poly- or perfluorine-containing compounds have become powerful tools for the effective synthesis of organofluorine compounds. The defluorinative cross-coupling of trifluoromethyl alkenes with various nucleophiles or radical precursors in an SN 2' manner is a convergent route to access gem-difluoroalkenes, which in turn react with nucleophiles or radical precursors via an SN V-type reaction. If the SN V reactions occur intramolecularly, the dual C-F bond cleavage of trifluoromethyl alkenes allows facile assembly of monofluorinated cyclic skeletons with structural complexity and diversity. In this personal account, we summarized the advances in this field on the basis of coupling and cyclization partners, including binucleophiles, alkynes, diradical precursors and radical precursors bearing a nucleophilic site. Accordingly, the annulation reactions can be achieved by base-mediated sequential SN 2'/SN V reactions, transition metal catalyzed or mediated reactions, photoredox catalysis, and the combination of photocatalytic reactions with SN V reaction. In the context of seminal works of others in this field, a concise summary of the contributions of the authors is also offered.

(E,Z)-1,1,1,4,4,4-Hexafluorobut-2-enes: hydrofluoroolefins halogenation/dehydrohalogenation cascade to reach new fluorinated allene

A series of 2,3-dihalo-1,1,1,4,4,4-hexafluorobutanes and 2-halo-1,1,1,4,4,4-hexafluorobut-2-enes were prepared from commercially available hydrofluoroolefins 1,1,1,4,4,4-hexafluorobut-2-enes and their 1H, 19F and 13C chemical shifts measured. Some reactions of synthesized 2-halo-1,1,1,4,4,4-hexafluorobut-2-enes have been investigated. A simple, one-pot procedure for the preparation of a new allene (1,1,4,4,4-pentafluorobuta-1,2-diene) and some of its transformations is presented.

Production of anhydrous hydrogen fluoride from fluorosilicic acid: a review

Anhydrous hydrogen fluoride (AHF), a critical raw material for industries such as aluminum, pharmaceuticals, and petroleum, has traditionally been sourced from fluorite-a non-renewable mineral. The unsustainable reliance on fluorite has catalyzed the search for alternative AHF production methods. A promising substitute is fluorosilicic acid (FSA), a byproduct of the phosphate fertilizer industry previously deemed waste. Transforming fluorosilicic acid into AHF not only yields a valuable resource but also addresses the environmental and economic challenges associated with waste management. The innovative practice of producing AHF from fluorosilicic acid signals a shift towards sustainable chemical production by capitalizing on waste, potentially diminishing reliance on fluorite and reducing the industry's environmental impact. This review thoroughly dissects the AHF synthesis process from fluorosilicic acid. Despite the acknowledged importance of fluorinated compounds in numerous industrial applications, research on their synthesis from fluorosilicic acid is limited and fragmented. This review seeks to amalgamate this scattered information by closely scrutinizing diverse industrial processing methods. Additionally, it explores the current and future landscape, economic feasibility, and strategies to navigate the obstacles inherent in synthesizing AHF from fluorosilicic acid. It also assesses the environmental impact of these methods, thereby contributing to the dialogue in this emerging field. The primary aim of this manuscript is to foster further research and promote the industrial uptake of this sustainable process. Highlighting the challenges and proposing potential improvements, the review supports the responsible reuse of waste and advocates for advancements in industrial practices.

Non-CO2 greenhouse gas separation using advanced porous materials

Global warming has become a growing concern over decades, prompting numerous research endeavours to reduce the carbon dioxide (CO2) emission, the major greenhouse gas (GHG). However, the contribution of other non-CO2 GHGs including methane (CH4), nitrous oxide (N2O), fluorocarbons, perfluorinated gases, etc. should not be overlooked, due to their high global warming potential and environmental hazards. In order to reduce the emission of non-CO2 GHGs, advanced separation technologies with high efficiency and low energy consumption such as adsorptive separation or membrane separation are highly desirable. Advanced porous materials (APMs) including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), porous organic polymers (POPs), etc. have been developed to boost the adsorptive and membrane separation, due to their tunable pore structure and surface functionality. This review summarizes the progress of APM adsorbents and membranes for non-CO2 GHG separation. The material design and fabrication strategies, along with the molecular-level separation mechanisms are discussed. Besides, the state-of-the-art separation performance and challenges of various APM materials towards each type of non-CO2 GHG are analyzed, offering insightful guidance for future research. Moreover, practical industrial challenges and opportunities from the aspect of engineering are also discussed, to facilitate the industrial implementation of APMs for non-CO2 GHG separation.

High Accuracy Ab Initio Potential Energy Curves and Dipole Moment Functions for the X1Σ+ and a3Π Spin States of the CF+ Diatomic Molecule

Potential energy curves and dipole moment functions constructed using high-accuracy ab initio methods allow for an in-depth examination of the electronic structure of diatomic molecules. Ab initio computations serve as a valuable complement to experimental data, offering insights into the nature of short-lived molecules such as those encountered within the interstellar medium (ISM). While laboratory experiments provide critical groundwork, the ISM's conditions often permit longer lifetimes for lower stability molecules, enabling unique observations. The CF+ diatomic molecule is one such molecule that has been observed spectroscopically in the ISM. Previous experimental and theoretical work have examined different spectroscopic aspects of the CF+ molecule, but the development of newer, more complete potential energy curves and dipole moment functions allows for even greater insight. We constructed both potential energy curves and dipole moment functions for the ground X1Σ+ and first excited a3Π states of CF+ for both the 12C and 13C isotopologues. The potential energy curves were constructed using coupled cluster with single, double, and perturbative triple excitations (CCSD(T)) at the complete basis set limit with corrections from full triple, quadruple, quintuple, and hextuple excitations within a finite-basis coupled cluster wave function as well as corrections from full configuration interaction and relativistic effects. Rovibrational wave functions were calculated using a vibrational Hamiltonian matrix, which moves beyond the harmonic oscillator approximation. The equilibrium bond length, vibrational constant, and rotational constant were reproduced to within 0.00013 Å, 0.28 cm-1, and 0.00045 cm-1, respectively, of experimental values. Experimental transition energies from rovibrational spectra were reproduced with an error of no larger than 0.63 cm-1. The triplet excited state (a3Π) was found to have a longer equilibrium bond length at 1.21069 Å, a vibrational constant of 1611.29 cm-1, and a rotational constant of 1.56376 cm-1. Rovibrational line lists for the 12C and 13C isotopologues for both the X1Σ+ and the excited a3Π states were generated.

Temperature-dependent molecular sieving of fluorinated propane/propylene mixtures by a flexible-robust metal-organic framework

The electronics industry necessitates highly selective adsorption separation of hexafluoropropylene (C3F6) from perfluoropropane (C3F8), which poses a challenge due to their similar physiochemical properties. In this work, we present a microporous flexible-robust metal-organic framework (Ca-tcpb) with thermoregulatory gate opening, a rare phenomenon that allows tunable sieving of C3F8/C3F6. Remarkably, the temperature-dependent adsorption behavior enhances the discrimination between the larger C3F8 and the smaller C3F6, resulting in unprecedented C3F6/C3F8 selectivity (over 10,000) compared to other well-known porous materials at an optimal temperature (298 K). Dynamic breakthrough experiments demonstrate that high-purity C3F8 (over 99.999%) could be obtained from a C3F6/C3F8 (10:90) mixture under ambient conditions. The unique attributes of this material encompass exceptional adsorption selectivity, remarkable structural stability, and outstanding separation performance, positioning it as a highly promising candidate for C3F6/C3F8 separation. Single-crystal structural analysis of C3F6-loaded Ca-tcpb and theoretical calculations elucidate the host-guest interaction via multiple intermolecular interactions.

Iodonium based regioselective double nucleophilic alkene functionalization of a hydrofluoroolefin scaffold

Herein, we report a modular regioselective alkene difunctionalization strategy based on the use of hydrofluoroolefin (HFO) gas as fluorous feedstock material. The transformation of the HFO gas to iodonium salt creates vicinal electrophilic sites readily available for a broad range of nucleophiles.

Cobalt-Catalyzed Electroreductive Alkylation of Unactivated Alkyl Chlorides with Conjugated Olefins

Reactions of unactivated alkyl chlorides under mild and sustainable conditions are rare compared to those of alkyl bromides or iodides. As a result, synthetic methods capable of modifying the vast chemical space of chloroalkane reagents, wastes, and materials are limited. We report the cobalt-catalyzed reductive addition of unactivated alkyl chlorides to conjugated alkenes. Co-catalyzed activation of alkyl chlorides is performed under electroreductive conditions, and the resulting reactions constitute formal alkyl-alkyl bond formation. In addition to developing an operationally simple methodology, detailed mechanistic studies provide insights into the elementary steps of a proposed catalytic cycle. In particular, we propose a switch in the mechanism of C-Cl bond activation from nucleophilic substitution to halogen atom abstraction, which is critical for efficiently generating alkyl radicals. These mechanistic insights were leveraged in designing ligands that enable couplings of primary, secondary, and tertiary alkyl chlorides.

Catalytic HF Shuttling between Fluoroalkanes and Alkynes

In this paper, we report BF3  ⋅ OEt2 as a catalyst to shuttle equivalents of HF from a fluoroalkane to an alkyne. Reactions of terminal and internal aliphatic alkynes led to formation of difluoroalkane products, while diarylalkynes can be selectively converted into fluoroalkenes. The method tolerates numerous sensitive functional groups including halogen, protected amine, ester and thiophene substituents. Mechanistic studies (DFT, probe experiments) suggest the catalyst is involved in both the defluorination and fluorination steps, with BF3 acting as a Lewis acid and OEt2 a weak Lewis base that mediates proton transfer. In certain cases, the interconversion of fluoroalkene and difluoroalkane products was found to be reversible. The new catalytic system was applied to demonstrate proof-of-concept recycling of poly(vinylidene difluoride).

Dissociation processes of ionized freons: CHFCl2+ and CF2Cl2+ in the gas phase

The present study reveals the effects of symmetry on how the distribution and flow of energy play out on the decomposition of small halocarbons. Unimolecular decay of the freons CHFCl2 and CF2Cl2 when ionized has been investigated. Mass spectrometric results that encompass isotope effects (peak heights) and energy distribution in the exit channel (peak shapes) are interpreted by computational methods. Non-statistical processes of electronic predissociation and isolated state decay are shown to be directly associated with molecular symmetry.

Tunable Synthesis of Monofluoroalkenes and Gem-Difluoroalkenes via Solvent-Controlled Rhodium-Catalyzed Arylation of 1-Bromo-2,2-difluoroethylene

Divergent synthesis of fluorine-containing scaffolds starting from a suite of raw materials is an intriguing topic. Herein, we report the solvent-controlled rhodium-catalyzed tunable arylation of 1-bromo-2,2-difluoroethylene. The selection of the reaction solvents provides switchable defluorinated or debrominated arylation from readily available feedstock resources (both arylboronic acids/esters and 1-bromo-2,2-difluoroethylene are commercially available). This switch is feasible because of the difference in coordination ability between the solvent (CH2 Cl2 or CH3 CN) and the rhodium center, resulting in different olefin insertion. This protocol allows the convenient synthesis of monofluoroalkenes and gem-difluoroalkenes, both of which are important scaffolds in the fields of medicine and materials. Moreover, this newly developed solvent-regulated reaction system can be applied to the site-selective dechlorinated arylation of trichloroethylene. Overall, this study provides a useful strategy for the divergent synthesis of fluorine-containing scaffolds and provides insight into the importance of solvent selection in catalytic reactions.

Nickel-Catalyzed Selective C(sp2 )-F Bond Alkylation of Industrially Relevant Hydrofluoroolefin HFO-1234yf

The selective transition-metal catalyzed C-F bond functionalization of inexpensive industrial fluorochemicals represents one of the most attractive approaches to valuable fluorinated compounds. However, the selective C(sp2 )-F bond carbofunctionalization of refrigerant hydrofluoroolefins (HFOs) remains challenging. Here, we report a nickel-catalyzed selective C(sp2 )-F bond alkylation of HFO-1234yf with alkylzinc reagents. The resulting 2-trifluoromethylalkenes can serve as a versatile synthon for diversified transformations, including the anti-Markovnikov type hydroalkylation and the synthesis of bioactive molecule analogues. Mechanistic studies reveal that lithium salt is essential to promote the oxidative addition of Ni0 (Ln ) to the C-F bond; the less electron-rich N-based ligands, such as bipyridine and pyridine-oxazoline, feature comparable or even higher oxidative addition rates than the electron-rich phosphine ligands; the strong σ-donating phosphine ligands, such as PMe3 , are detrimental to transmetallation, but the less electron-rich and bulky N-based ligands, such as pyridine-oxazoline, facilitate transmetallation and reductive elimination to form the final product.

Visible-light-induced nickel-catalyzed α-hydroxytrifluoroethylation of alkyl carboxylic acids: Access to trifluoromethyl alkyl acyloins

A visible-light-induced nickel-catalyzed cross coupling of alkyl carboxylic acids with N-trifluoroethoxyphthalimide is described. Under purple light irradiation, an α-hydroxytrifluoroethyl radical generated from a photoactive electron donor-acceptor complex between Hantzsch ester and N-trifluoroethoxyphthalimide was subsequently engaged in a nickel-catalyzed coupling reaction with in situ-activated alkyl carboxylic acids. This convenient protocol does not require photocatalysts and metal reductants, providing a straightforward and efficient access to trifluoromethyl alkyl acyloins in good yields with broad substrate compatibility. The complex bioactive molecules were also compatible with this catalytic system to afford the corresponding products.

First Atmospheric Measurements and Emission Estimates of HFO-1336mzz(Z)

For the past few years, short-lived unsaturated halocarbons have been marketed as environmentally friendly replacements for long-lived halogenated greenhouse gases and ozone-depleting substances. The phase-in of unsaturated halocarbons for various applications, such as refrigeration and foam blowing, can be tracked by their emergence and increase in the atmosphere. We present the first atmospheric measurements of the hydrofluoroolefin (HFO) HFO-1336mzz(Z) ((Z)-1,1,1,4,4,4-hexafluoro-2-butene, cis-CF3CH═CHCF3), a newly used unsaturated hydrofluorocarbon. HFO-1336mzz(Z) has been detected in >90% of all measurements since 2018 during multi-month campaigns at three Swiss and one Dutch location. Since 2019, it is found in ∼30% of all measurements that run continuously at the Swiss high-altitude Jungfraujoch station. During pollution events, mole fractions of up to ∼10 ppt were observed. Based on our measurements, Swiss and Dutch emissions were estimated at 2-7 Mg yr-1 (2019-2021) and 30 Mg yr-1 (2022), respectively. Modeled spatial emission distributions only partly conform to population density in both countries. Monitoring the presence of new unsaturated halocarbons in the atmosphere is crucial since long-term effects of their degradation products are still debated. Furthermore, the production of HFOs involves climate-active substances, which may leak to the atmosphere─in the case of HFO-1336mzz(Z), for example, the ozone-depleting CFC-113a (CF3CCl3).

Fluorine-a small magic bullet atom in the drug development: perspective to FDA approved and COVID-19 recommended drugs

During the last twenty years, organic fluorination chemistry established itself as an important tool to get a biologically active compound. This belief can be supported by the fact that every year, we are getting fluorinated drugs in the market in extremely significant numbers. Last year, also ten fluorinated drugs have been approved by FDA and during the COVID-19 pandemic, fluorinated drugs played a very crucial role to control the disease and saved many lives. In this review, we surveyed all ten fluorinated drugs approved by FDA in 2021 and all fluorinated drugs which were directly-indirectly used during the COVID-19 period, and emphasis has been given particularly to their synthesis, medicinal chemistry, and development process. Out of ten approved drugs, one drug pylarify, a radioactive diagnostic agent for cancer was approved for use in positron emission tomography imaging. Also, very briefly outlined the significance of fluorinated drugs through their physical, and chemical properties and their effect on drug development.

Graphical abstract

Aminals as powerful XAT-reagents: activation of fluorinated alkyl chlorides

Readily available 1,3,5-trimethyl-1,3,5-triazinane serves as an efficient reagent for halogen atom transfer. Under photocatalytic conditions, the triazinane generates an α-aminoalkyl radical, which can activate the C-Cl bond of fluorinated alkyl chlorides. The hydrofluoroalkylation reaction between fluorinated alkyl chlorides and alkenes is described. The efficiency of the diamino-substituted radical derived from the triazinane is associated with stereoelectronic effects defined by a six-membered cycle forcing the anti-periplanar arrangement of the radical orbital and lone pairs of adjacent nitrogen atoms.

Removing per- and polyfluoroalkyl substances (PFAS) in water by foam fractionation

Treatment of large volumes of waters contaminated by per- and polyfluoroalkyl substances (PFAS) remains a challenge. This work presented a systematic study on PFAS removal by foam fractionation (FF). Experiments were conducted on both laboratory-spiked and environmental water samples containing PFASs. It is found that higher air flow, greater ionic strength, and addition of thickener boosted PFAS removal in the defoamed bottom solutions and intensified enrichment in the collected foam. FF treatments of a landfill leachate, a groundwater contaminated by aqueous film-forming foams, and a wastewater treatment plant effluent sample were evaluated. The removal reached above 70% for most monitored PFASs, except the ones of short alkyl chains. PFAS concentrations in the final collected foams were up to over 30 × than that in the original samples. Analysis using high-resolution mass spectrometry revealed enrichment of non-target PFASs by FF. The results of this study demonstrate great effectiveness of FF in removing most PFASs from waters, producing low-volume, highly concentrated solutions of PFASs in all tested environmental samples.

Organocatalyzed Controlled Radical Copolymerization toward Hybrid Functional Fluoropolymers Driven by Light

Photo-controlled polymerizations are attractive to tailor macromolecules of complex compositions with spatiotemporal regulation. In this work, with a convenient synthesis for trifluorovinyl boronic ester (TFVB), we report a light-driven organocatalyzed copolymerization of vinyl monomers and TFVB for the first time, which enabled the controlled synthesis of a variety of hybrid fluorine/boron polymers with low dispersities and good chain-end fidelity. The good behaviors of "ON/OFF" switch, chain-extension polymerizations and post-modifications further highlight the versatility and reliability of this copolymerization. Furthermore, we demonstrate that the combination of fluorine and boron could furnish copolymer electrolytes of high lithium-ion transference number (up to 0.83), bringing new opportunities of engineering high-performance materials for energy storage purposes.

Two-Step Synthesis of 2-Trifluoromethylated and 2-Difluoromethylated Benzoheteroles Starting from HFO-1224yd(Z) and HFO-1233yd(Z)

An efficient two-step method for synthesizing 2-(trifluoromethyl)- and 2-(difluoromethyl)benzoheteroles bearing various substituents was developed. Commercially available HFO-1224yd(Z) or HFO-1233yd(Z) underwent the Suzuki-Miyaura coupling with arylboronic acids (acid esters) bearing a nucleophilic moiety at the ortho position to yield the corresponding β-fluoro-β-(trifluoromethyl)- or β-fluoro-β-(difluoromethyl)styrenes, respectively. Treatment of the obtained styrenes with potassium phosphate induced nucleophilic 5-endo-trig cyclization to provide the corresponding 2-trifluoromethylated or 2-difluoromethylated indoles and benzofurans, as well as benzothiophenes.

Versatile Fluorine-Containing Building Blocks: β-CF3-1,3-enynes

The development of diversity-oriented synthesis based on fluorine-containing building blocks has been one of the hot research fields in fluorine chemistry. β-CF₃-1,3-enynes, as one type of fluorine-containing building blocks, have attracted more attention in the last few years due to their distinct reactivity. Numerous value-added trifluoromethylated or non-fluorinated compounds which have biologically relevant structural motifs, such as O-, N-, and S-heterocycles, carboncycles, fused polycycles, and multifunctionalized allenes were synthesized from these fluorine-containing building blocks. This review summarizes the most significant developments in the area of synthesis of organofluorine compounds based on β-CF₃-1,3-enynes, providing a detailed overview of the current state of the art.

Nickel-Catalyzed Homologation of Vinylidene Difluoride (CH2═CF2): Selective β-F vs β-H Elimination

Hydrofluoroolefins (HFOs) constitute the newest generation of fluorocarbon refrigerants and foam-blowing agents due to their reduced global warming potential vs their saturated analogues. To identify new synthetic routes to HFOs, we show that reactions of bulky Ni(0) phosphine and -NHC complexes with vinylidene difluoride (VF2) afford μ-fluoro-1,1,3-trifluorobut-3-enyl Ni complexes. Moreover, addition of triisopropylsilane allows for reductive elimination of the reduced product─2,4,4-trifluoro-1-butene─demonstrating the Ni-catalyzed hydrodefluorodimerization of VF2. Accompanying DFT calculations identify the T-shaped nickelacyclopentane intermediate that spontaneously undergoes selective intramolecular β-F (vs β-H) elimination.

Hydrodehalogenation of Trichlorofluoromethane over Biogenic Palladium Nanoparticles in Ambient Conditions

Among a number of persistent chlorofluorocarbons (CFCs, or freons), the emissions of trichlorofluoromethane (CFCl₃, CFC-11) have been increasing since 2002. Zero-valent-Pd (Pd⁰) catalysts are known to hydrodehalogenate CFCs; however, most studies rely on cost-inefficient and eco-unfriendly chemical synthesis of Pd⁰NPs and harsh reaction conditions. In this study, we synthesized Pd⁰ nanoparticles (Pd⁰NPs) using D. vulgaris biomass as the support and evaluated hydrodehalogenation of CFC-11 catalyzed by the biogenic Pd⁰NPs. The presence of D. vulgaris biomass stabilized and dispersed 3-6 nm Pd⁰NPs that were highly active. We documented, for the first time, Pd⁰-catalyzed simultaneous hydrodechlorination and hydrodefluorination of CFC-11 at ambient conditions (room temperature and 1 atm). More than 70% CFC-11 removal was achieved within 15 h with a catalytic activity of 1.5 L/g-Pd/h, dechlorination was 50%, defluorination was 41%, and selectivity to fully dehalogenated methane was >30%. The reaction pathway had a mixture of parallel and sequential hydrodehalogenation. In particular, hydrodefluorination was favored by higher H₂ availability and Pd⁰:CFC-11 ratio. This study offers a promising strategy for efficient and sustainable treatment of freon-contaminated water.

On-line trace monitoring of volatile halogenated compounds in air by improved thermal desorption-gas chromatography-mass spectrometry

Volatile halogenated compounds (VHCs) are important industrial chemicals and play a crucial role in potential stratospheric ozone-depletion and global warming. Profiling of VHCs is of great significance but replete with challenges due to the species' richness and diversity. In this study, we developed a novel method employing water removal mode combined with thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) for on-line measurement of VHCs at the ultratrace level. By removing water with Nafion dryer tandem cold trap device, VHCs could achieve better separation and identification, and detection precision of VHCs lower than 10%. The proposed method exhibited limits of detection for VHCs ranging from 0.1 to 6.2 pptv. Benefiting from the improved trapping efficiency due to water removal, we successfully quantified 34 VHCs at the Shangdianzi background station and achieved a comprehensive assessment of VHCs in ambient air.

Fehér P, Stirling A, Czégény Z, Bényei A, Novák Z. Synthesis of Hydrofluoroolefin-Based Iodonium Reagent via Dyotropic Rearrangement and Its Utilization in Fluoroalkylation

[1,2]-shift of atoms in alkyl fragments belongs to the class of dyotropic rearrangements. Various atoms, including halogens can be involved in the migration, however participation of iodine is unprecedented. Herein, we report our experimental and DFT studies on the oxidation triggered dyotropic rearrangement of iodo and chloro functions via butterfly-type transition state to demonstrate the migrating ability of λ3 -iodane centre. With the exploitation of dyotropic rearrangement we designed and synthesized a novel fluoroalkyl iodonium reagent from industrial feedstock gas HFO-1234yf. We demonstrated that the hypervalent reagent serves as an excellent fluoroalkylation agent for various amines and nitrogen heterocycles.

Selective Nickel-Catalyzed Hydrodefluorination of Amides Using Sodium Borohydride

Hydrodefluorination selective to the ortho position to amides is accomplished under mild conditions using sodium borohydride and a nickel catalyst. The facile formation of a nickelacycle intermediate with a specific geometry ensures selectivity without the need for electronic directing groups, and fluorine atoms in other positions remain intact. This method avoids the use of stoichiometric silanes which are typical for most other defluorination reactions, resulting in virtually no organic waste byproducts.

Repurposing of F-gases: challenges and opportunities in fluorine chemistry

Fluorinated gases (F-gases) are routinely employed as refrigerants, blowing agents, and electrical insulators. These volatile compounds are potent greenhouse gases and consequently their release to the environment creates a significant contribution to global warming. This review article seeks to summarise: (i) the current applications of F-gases, (ii) the environmental issues caused by F-gases, (iii) current methods of destruction of F-gases and (iv) recent work in the field towards the chemical repurposing of F-gases. There is a great opportunity to tackle the environmental and sustainability issues created by F-gases by developing reactions that repurpose these molecules.

Progress in the development and use of refrigerants and unintended environmental consequences

The world has entered into the "fourth-generation" of refrigerants, and it is an undeniable fact that we will continue to encounter several issues in identifying a suitable refrigerant that suits the purpose and poses no harm to the environment. The ever-changing regulations on the use of refrigerants have often posed great challenges to the refrigeration industry and there is a pressing need to develop new refrigerants and develop better equipment to use them. Theoretically, an ideal refrigerant should possess characteristics such as low-global warming potential (GWP), non-toxic, non-flammable, and zero-ozone depletion potential (ODP). In addition, the refrigerants are also expected to have excellent thermodynamic and thermophysical properties. Many new synthetic refrigerants have been reported as alternative refrigerants and have very low atmospheric life as well as low GWP and zero-ODP. However, it is irrefutable that most of the studies that reported the so-called new refrigerants are actually not new. From the invention of R-12 (Dichlorodifluoromethane) in 1930s to the invention of R-1234yf in 2000s, these substances are available for decades even before being recognized as refrigerants. This review attempts to provide chronicles on different aspects of refrigerants such as their progress since their invention in the early 1800s, classification and properties. In addition, concepts such as issues associated with the long-term use of refrigerants, barriers for the inclusion of low-GWP refrigerants, various protocols and accords that have occurred since the inception of refrigerants are also critically discussed.

Access to 4-Trifluoromethyl Quinolines via Cu-Catalyzed Annulation Reaction of Ketone Oxime Acetates with ortho-Trifluoroacetyl Anilines under Redox-Neutral Conditions

An efficient Cu-catalyzed annulation reaction of ketone oxime acetates with ortho-trifluoroacetyl anilines has been disclosed. With the developed protocol, a series of 4-trifluoromethyl quinolines were obtained in good to excellent yields (58-99%) under redox-neutral conditions. The protocol also could be extended to ferrocene-based ketone oxime acetates for the construction of ferrocene-substituted fluorine-containing quinolines.

Spectroscopic characterization and photochemistry of the Criegee intermediate CF3C(H)OO

Criegee intermediates (CIs), also known as carbonyl oxide, are reactive intermediates that play an important role in the atmospheric chemistry. Investigation on the structures and reactivity of CIs is of fundamental importance in understanding the underlying mechanism of their atmospheric reactions. In sharp contrast to the intensively studied parent molecule (CH₂OO) and the alkyl-substituted derivatives, the knowledge about the fluorinated analogue CF₃C(H)OO is scarce. By carefully heating the triplet carbene CF₃CH in an O₂-doped Ar-matrix to 35 K, the elusive carbonyl oxide CF₃C(H)OO in syn- and anti-conformations has been generated and characterized with infrared (IR) and ultraviolet-visible (UV-vis) spectroscopy. The spectroscopic identification is supported by ¹⁸O-labeling experiments and quantum chemical calculations at the B3LYP/6-311++G(3df,3pd) and MP2/6-311++G(2d,2p) levels. Upon the long-wavelength irradiation (λ > 680 nm), both conformers of CF₃C(H)OO decompose to give trifluoroacetaldehyde CF₃C(H)O and simultaneously rearrange to the isomeric dioxirane, cyclic-CF₃CH(OO), which undergoes isomerization to the lowest-energy carboxylic acid CF₃C(O)OH upon UV-light excitation at 365 nm. The O₂-oxidation of CF₃CH via the intermediacy of CF₃C(H)OO and cyclic-CF₃CH(OO) might provide new insight into the mechanism for the degradation of hydro-chlorofluorocarbon CF₃CHCl₂ (HCFC-123) in the atmosphere.

Synthesis of bioactive fluoropyrrolidines via copper(i)-catalysed asymmetric 1,3-dipolar cycloaddition of azomethine ylides

Chiral pyrrolidinyl units are important building blocks in biologically active natural products and drugs, and the development of efficient methods for the synthesis of diverse structured pyrrolidine derivatives is of great importance. Meanwhile, incorporating fluorine containing groups into small molecules often changes their activities to a great extent due to the special physicochemical properties of fluorine atoms. Herein, we report an efficient route to obtain enantioenriched 3,3-difluoro- and 3,3,4-trifluoropyrrolidinyl derivatives by Cu(i)-catalysed enantioselective 1,3-dipolar cycloaddition of azomethine ylides with less active 1,1-difluoro- and 1,1,2-trifluorostyrenes. A series of new fluorinated pyrrolidines have been prepared in high yields (up to 96%) and with excellent stereoselectivities (up to >20 : 1 dr and 97% ee), and these unique structural blocks could be readily introduced into some natural compounds and pharmaceuticals. Additionally, antifungal activity investigation against four common plant fungi showed that some products possess general and high biological activities; comparison with the low antifungal activities of corresponding nonfluorinated compounds revealed that the fluorine atoms at the pyrrolidinyl rings play a crucial role in the antifungal activity.

Chiral fluoropyrrolidines were synthesized by Cu(i)-catalyzed enantioselective 1,3-dipolar cycloaddition of azomethine ylides with less active fluorinated styrenes, with broad substrate scope and high yield, stereoselectivity and biological activity.

Narrowing feedstock exemptions under the Montreal Protocol has multiple environmental benefits

The Montreal Protocol on Substances that Deplete the Ozone Layer (Montreal Protocol) can be further strengthened to control ozone-depleting substances and hydrofluorocarbons used as feedstocks to provide additional protection of the stratospheric ozone layer and the climate system while also mitigating plastics pollution. The feedstock exemptions were premised on the assumption that feedstocks presented an insignificant threat to the environment; experience has shown that this is incorrect. Through its adjustment procedures, the Montreal Protocol can narrow the scope of feedstock exemptions to reduce inadvertent and unauthorized emissions while continuing to exempt production of feedstocks for time-limited, essential uses. This upstream approach can be an effective and efficient complement to other efforts to reduce plastic pollution. Existing mechanisms in the Montreal Protocol such as the Assessment Panels and national implementation strategies can guide the choice of environmentally superior substitutes for feedstock-derived plastics. This paper provides a framework for policy makers, industries, and civil society to consider how stronger actions under the Montreal Protocol can complement other chemical and environmental treaties.