Enhancing the Fenton-like Catalytic Activity of nFe2O3 by MIL-53(Cu) Support: A Mechanistic Investigation

The profound review of Fenton process: What's the next step?

Fenton and Fenton-like processes, which could produce highly reactive species to degrade organic contaminants, have been widely used in the field of wastewater treatment. Therein, the chemistry of Fenton process including the nature of active oxidants, the complicated reactions involved, and the behind reason for its strongly pH-dependent performance, is the basis for the application of Fenton and Fenton-like processes in wastewater treatment. Nevertheless, the conflicting views still exist about the mechanism of the Fenton process. For instance, reaching a unanimous consensus on the nature of active oxidants (hydroxyl radical or tetravalent iron) in this process remains challenging. This review comprehensively examined the mechanism of the Fenton process including the debate on the nature of active oxidants, reactions involved in the Fenton process, and the behind reason for the pH-dependent degradation of contaminants in the Fenton process. Then, we summarized several strategies that promote the Fe(II)/Fe(III) cycle, reduce the competitive consumption of active oxidants by side reactions, and replace the Fenton reagent, thus improving the performance of the Fenton process. Furthermore, advances for the future were proposed including the demand for the high-accuracy identification of active oxidants and taking advantages of the characteristic of target contaminants during the degradation of contaminants by the Fenton process.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Recent development of substrates for immobilization of bimetallic nanoparticles for wastewater treatment: a review

Bimetallic nanoparticles (BMNPs) have gained considerable attention due to their remarkable catalytic properties, making them invaluable in wastewater treatment applications. One of these challenges lies in the propensity of BMNPs to aggregate due to Van der Waals interactions, which can reduce their overall performance. Additionally, retrieving exhausted NPs from the treated solution for subsequent reuse remains a significant hurdle. Moreover, the leaching of NPs into the discharged wastewater can have harmful effects on humans as well as aquatic life. To overcome these issues, various substrates have been researched to maximize the efficiency and stability of the NPs. This review paper delves into the pivotal role of various substrates in immobilizing BMNPs, providing a comprehensive analysis of their performances, advantages, and drawbacks. The substrates encompass a diverse range of materials, including organic, inorganic, organic-inorganic, beads, fibers, and membranes. Each substrate type offers unique attributes, influencing the stability, efficiency, and recyclability of BMNPs. This review paper aims to provide an up-to-date and detailed analysis and comparison of the substrates used for the immobilization of BMNPs. This work further reviews the underlying mechanisms of the composites involved in treating pollutants from wastewater and how these mechanisms are enhanced by the synergistic effects produced by the substrate and BMNPs. Furthermore, the reusability and sustainability of these composites are discussed. Also, high-performing substrates are highlighted to give direction to future research focusing on the immobilization of BMNPs in the application of wastewater treatment.

In-situ precipitation zero-valent Co on Co2VO4 to activate oxygen vacancies and enhance bimetallic ions redox for efficient detection toward Hg(II)

Despite the widespread utilization of variable valence metals in electrochemistry, it is still a formidable challenge to enhance the valence conversion efficiency to achieve excellent catalytic activity without introducing heterophase elements. Herein, the in-situ precipitation of Co particles on Co2VO4 not only enhanced the concentration of oxygen vacancies (Ov) but also generated a greater number of low-valence metals, thereby enabling efficient reduction towards Hg(II). The electroanalysis results demonstrate that the sensitivity of Co/Co2VO4 towards Hg(II) was measured at an impressive value of 1987.74 μA μM-1 cm-2, significantly surpassing previously reported results. Further research reveals that Ov acted as the main adsorption site to capture Hg(II). The redox reactions of Co2+/Co3+ and V3+/V4+ played a synergistic role in the reduction of Hg(II), accompanied by the continuous supply of electrons from zero-valent Co to expedite the valence cycle. The Co/Co2VO4/GCE presented remarkable selectivity towards Hg(II), with excellent stability, reproducibility, and anti-interference capability. The electrode also exhibited minimal sensitivity fluctuations towards Hg(II) in real water samples, underscoring its practicality for environmental applications. This study elucidates the mechanism underlying the surface redox reaction of metal oxides facilitated by zero-valent metals, providing us with new strategies for further design of efficient and practical sensors.

A new strategy for improving the energy efficiency of electro-Fenton: Using N-doped activated carbon cathode with strong Fe(III) adsorption capacity to promote Fe(II) regeneration

Fe(II) regeneration plays a crucial role in the electro-Fenton process, significantly influencing the rate of ·OH formation. In this study, a method is proposed to improve Fe(II) regeneration through N-doping aimed at enhancing the adsorption capacity of the activated carbon cathode for Fe(III). N-doping not only enriched the pore structure on the surface of activated carbon, providing numerous adsorption sites, but also significantly increased the adsorption energy for Fe(III). Among the types of nitrogen introduced, pyridine-N exhibited the most substantial enhancement effect, followed by pyrrole-N, while graphite-N showed a certain degree of inhibition. Furthermore, N-doping facilitated the adsorption of all forms of Fe(III) by activated carbon. The adsorption and electrosorption rates of the NAC-900 electrode for Fe(III) were 30.33% and 42.36%, respectively. Such modification markedly enhanced the Fe3+/Fe2+ cycle within the electro-Fenton system. The NAC-900 system demonstrated an impressive phenol degradation efficiency of 93.67%, alongside the lowest electricity consumption attributed to the effective "adsorption-reduction" synergy for Fe(III) on the NAC-900 electrode. Compared to the AC cathode electro-Fenton system, the degradation efficiency of the NAC-900 cathode electro-Fenton system at pH = levels ranging from 3 to 5 exceeded 90%; thus, extending the pH applicability of the electro-Fenton process. The degradation efficiency of phenol using the NAC-900 cathode electro-Fenton system in various water matrices approached 90%, indicating robust performance in real wastewater treatment scenarios. This research elucidates the impact of cathodic Fe(III) adsorption on Fe(II) regeneration within the electro-Fenton system, and clarifies the influence of different N- doping types on the cathodic adsorption of Fe(III).

MOFs@POMs-derived bimetallic oxide Fe2(MoO4)3 nanoparticles for sensitive colorimetric detection of salicylic acid in aspirin

A colorimetric sensing method for salicylic acid (SA) was developed by designing and fabricating bimetallic oxide nanozymes. Firstly, by calcinating MIL-100(Fe)@PMo12 (MOFs@POMs) at different temperature, Fe2(MoO4)3-Ts (T = 400℃, 500℃, 600℃, 700℃) nanoparticles (NPs) were successfully prepared. Secondly, by evaluating the peroxidase-like activities, Fe2(MoO4)3-600 NPs shows the best peroxidase-like activity attributed to the Fenton-like effect and the synergistic coupling interaction between Mo and Fe. Finally, based on the specific complexation between SA and Fe3+, a sensitive colorimetric sensor for SA was established, which exhibits superior selectivity and interference with a detection limit of 0.11 μM and a linear range of 10 to 100 μM, the lowest LOD for SA to date, to the best of our knowledge.

Insights into persulfate activation by dicyandiamide-derived carbon for 2,4-dichlorophenol degradation: Roles of nitrogen doping and defective carbon atoms

In this study, a dicyandiamide residue-derived carbon material (DWC-800) was fabricated through a two-step process involving ball-milling nitrogen (N) doping and high-temperature annealing, and then utilized for peroxodisulfate (PDS) activation in the removal of 2,4-dichlorophenol (2,4-DCP). The obtained DWC-800, with very low N content (0.52 at.%), exhibited highly efficient PDS activation, resulting in complete removal of 2,4-DCP in 60 min. This performance was superior to that of the material with high N content (15.4 at.%), which was prepared using only one-step ball-milling N doping. The N-doped process increased the defective degree of carbocatalyst, and these reactive carbon defects rather than N species greatly improved the adsorption and catalytic activity. The results of quenching experiments and electron paramagnetic resonance demonstrated that PDS activation by DWC-800 for 2,4-DCP degradation followed a nonradical pathway, leading to the production of both singlet oxygen (1O2) and carbon-PDS* complex. Notably, electron transfer mediated by the carbon-PDS* complex played a significant role in the degradation of 2,4-DCP. Overall, this study gets new insights into the role of N doping in mediating the structural properties of the carbocatalyst and its catalytic performance, and provides a theoretical basis for the utilization of dicyandiamide waste residue for wastewater remediation.

Selective and Stable CO2 Electroreduction to CH4 via Electronic Metal-Support Interaction upon Decomposition/Redeposition of MOF

The CO2 electroreduction to fuels is a feasible approach to provide renewable energy sources. Therefore, it is necessary to conduct experimental and theoretical investigations on various catalyst design strategies, such as electronic metal-support interaction, to improve the catalytic selectivity. Here a solvent-free synthesis method is reported to prepare a copper (Cu)-based metal-organic framework (MOF) as the precursor. Upon electrochemical CO2 reduction in aqueous electrolyte, it undergoes in situ decomposition/redeposition processes to form abundant interfaces between Cu nanoparticles and amorphous carbon supports. This Cu/C catalyst favors the selective and stable production of CH4 with a Faradaic efficiency of ≈55% at -1.4 V versus reversible hydrogen electrode (RHE) for 12.5 h. The density functional theory calculation reveals the crucial role of interfacial sites between Cu and amorphous carbon support in stabilizing the key intermediates for CO2 reduction to CH4 . The adsorption of COOH* and CHO* at the Cu/C interface is up to 0.86 eV stronger than that on Cu(111), thus promoting the formation of CH4 . Therefore, it is envisioned that the strategy of regulating electronic metal-support interaction can improve the selectivity and stability of catalyst toward a specific product upon electrochemical CO2 reduction.

A Nitro Functionalized MOF with Multi-Enzyme Mimetic Activities for the Colorimetric Sensing of Glucose at Neutral pH

Benefiting from the advantages like large surface area, flexible constitution, and diverse structure, metal-organic frameworks (MOFs) have been one of the most ideal candidates for nanozymes. In this study, a nitro-functionalized MOF, namely NO₂-MIL-53(Cu), was synthesized. Multi-enzyme mimetic activities were discovered on this MOF, including peroxidase-like, oxidase-like, and laccase-like activity. Compared to the non-functional counterpart (MIL-53(Cu)), NO₂-MIL-53(Cu) displayed superior enzyme mimetic activities, indicating a positive role of the nitro group in the MOF. Subsequently, the effects of reaction conditions on enzyme mimetic activities were investigated. Remarkably, NO₂-MIL-53(Cu) exhibited excellent peroxidase-like activity even at neutral pH. Based on this finding, a simple colorimetric sensing platform was developed for the detection of H₂O₂ and glucose, respectively. The detection liner range for H₂O₂ is 1-800 μM with a detection limit of 0.69 μM. The detection liner range for glucose is linear range 0.5-300 μM with a detection limit of 2.6 μM. Therefore, this work not only provides an applicable colorimetric platform for glucose detection in a physiological environment, but also offers guidance for the rational design of efficient nanozymes with multi-enzyme mimetic activities.

Novel strategy for copper precipitation from cupric complexes wastewater: Catalytic oxidation or reduction self-decomplexation?

Cupric (Cu(II)) complexes in industrial wastewater are responsible for the failure of conventional alkaline precipitation, but the properties of cuprous (Cu(I)) complexes at alkaline circumstance have not been focused. This report proposed a novel strategy for the remediation of Cu(II)-complexed wastewater by coupling alkaline precipitation with green benign reductant, namely, hydroxylamine hydrochloride (HA). This remediation process (HA-OH) exhibits superior Cu removal efficiency that cannot be achieved with the same dosage of oxidants (3 mM). The possibility of Cu(I) activated O₂ catalysis and self-decomplexation precipitation were investigated, and the results identified that ¹O₂ was generated from Cu(II)/Cu(I) cycle, but it was insufficient to annihilate organic ligands. Cu(I) self-decomplexation was the dominate mechanism of Cu removal. For real industrial wastewater, HA-OH process can realize the efficient Cu₂O precipitation and Cu recovery. This novel strategy utilized intrinsic pollutant in wastewater without introducing other metals, complicated materials, and expensive equipment, broadening the insight for the remediation of Cu(II)-complexed wastewater.

Enhancing zerovalent iron-based Fenton-like chemistry by copper sulfide: Insight into the active sites for sustainable Fe(II) supply

Zerovalent iron (ZVI)-based Fenton-like processes have been widely applied in degrading organic contaminants. However, the surface oxyhydroxide passivation layer produced during the preparation and oxidation of ZVI hinders its dissolution and Fe(III)/Fe(II) cycling, and restricts the generation of reactive oxygen species (ROS). In this study, copper sulfide (CuS) was found to effectively enhance the degradation of diverse organic pollutants in the ZVI/H₂O₂ system. Moreover, the degradation performance for the actual industrial wastewater (i.e., dinitrodiazophenol wastewater) in the ZVI/H₂O₂ system was impressively improved by 41% with CuS addition, and the COD removal efficiency could reach 97% after 2 h of treatment. Mechanism investigation revealed that the introduction of CuS accelerated the sustainable supply of Fe(II) in the ZVI/H₂O₂ system. Specifically, Cu(I) and reductive sulfur species (i.e., S^2-, S₂^2-, S_n^2- and H₂S (aq)) from CuS directly induced efficient Fe(III)/Fe(II) cycling. The iron-copper synergistic effect between Cu(II) from CuS and ZVI expedited Fe(II) generation from ZVI dissolution and Fe(III) reduction by formed Cu(I). This study not only elucidates the promotion effects of CuS on ZVI dissolution and Fe(III)/Fe(II) cycling in ZVI-based Fenton-like processes, but also provides a sustainable and high-efficiency iron-based oxidation system for removal of organic contaminants.

Sandwich-type electrochemical immunosensor based on CuFe2O4-Pd for cardiac troponin I detection

A sandwich-type electrochemical immunosensor was designed by highly efficient catalytic cycle amplification strategy of CuFe₂O₄-Pd for sensitive detection of cardiac troponin I. CuFe₂O₄ with coupled variable valence metal elements exhibited favorable catalytic performance through bidirectional cycling of Fe²⁺/Fe³⁺ and Cu⁺/Cu²⁺ redox pairs. More importantly, Cu⁺ acted as the intermediate product of the catalytic reaction, promoted the regeneration of Fe²⁺ and ensured the continuous recycling occurrence of the double redox pairs, and significantly amplified the current signal response. Pd nanoparticles (Pd NPs) loaded on the surface of amino-functionalized CuFe₂O₄ (CuFe₂O₄-NH₂) served as electrochemical mediators to capture labeled antibodies (Ab₂), and also as co-catalysts of CuFe₂O₄ to further enhance the catalytic efficiency, thus improving the sensitivity of the electrochemical immunosensor. Under the optimal experimental conditions, the linear range was 0.001 ~ 100 ng/mL, and the detection limit was 1.91 fg/mL. The electrochemical immunosensor has excellent analytical performance, giving a new impetus for the sensitive detection of cTnI.

Electrochemical activation of periodate with graphite electrodes for water decontamination: Excellent applicability and selective oxidation mechanism

Advanced oxidation technologies based on periodate (PI, IO₄^-) have garnered significant attention in water decontamination. In this work, we found that electrochemical activation using graphite electrodes (E-GP) can significantly accelerate the degradation of micropollutants by PI. The E-GP/PI system achieved almost complete removal of bisphenol A (BPA) within 15 min, exhibited unprecedented pH tolerance ranging from pH 3.0 to 9.0, and showed more than 90% BPA depletion after 20 h of continuous operation. Additionally, the E-GP/PI system can realize the stoichiometric transformation of PI into iodate, dramatically decreasing the formation of iodinated disinfection by-products. Mechanistic studies confirmed that singlet oxygen (¹O₂) is the primary reactive oxygen species in the E-GP/PI system. A comprehensive evaluation of the oxidation kinetics of ¹O₂ with 15 phenolic compounds revealed a dual descriptor model based on quantitative structure-activity relationship (QSAR) analysis. The model corroborates that pollutants exhibiting strong electron-donating capabilities and high pK_a values are more susceptible to attack by ¹O₂ through a proton transfer mechanism. The unique selectivity induced by ¹O₂ in the E-GP/PI system allows it to exhibit strong resistance to aqueous matrices. Thus, this study demonstrates a green system for the sustainable and effective elimination of pollutants, while providing mechanistic insights into the selective oxidation behaviour of ¹O₂.

Promoted wet peroxide oxidation of chlorinated volatile organic compounds catalyzed by FeOCl supported on macro-microporous biomass-derived activated carbon

Chlorinated volatile organic compounds (CVOCs) are a recalcitrant class of air pollutants, and the strongly oxidizing reactive oxygen species (ROS) generated in advanced oxidation processes (AOPs) are promising to degrade them. In this study, a FeOCl-loaded biomass-derived activated carbon (BAC) has been used as an adsorbent for accumulating CVOCs and catalyst for activating H₂O₂ to construct a wet scrubber for the removal of airborne CVOCs. In addition to well-developed micropores, the BAC has macropores mimicking those of biostructures, which allows CVOCs to diffuse easily to its adsorption sites and catalytic sites. Probe experiments have revealed HO^• to be the dominant ROS in the FeOCl/BAC + H₂O₂ system. The wet scrubber performs well at pH 3 and H₂O₂ concentrations as low as a few mM. It is capable of removing over 90% of dichloroethane, trichloroethylene, dichloromethane and chlorobenzene from air. By applying pulsed dosing or continuous dosing to replenish H₂O₂ to maintain its appropriate concentration, the system achieves good long-term efficiency. A dichloroethane degradation pathway is proposed based on the analysis of intermediates. This work may provide inspiration for the design of catalyst exploiting the inherent structure of biomass for catalytic wet oxidation of CVOCs or other contaminants.

Removal of Bisphenol A via peroxymonosulfate activation over graphite carbon nitride supported NiCx nanoclusters catalyst: Synergistic oxidation of high-valent nickel-oxo species and singlet oxygen

In this work, a g-C₃N₄ supported NiCx nanoclusters catalyst (NiCx-CN) was developed, and its performance in activating peroxymonosulfate (PMS) was evaluated. Mechanism investigation stated that although singlet oxygen (¹O₂) was formed in the catalytic process, its contribution to BPA elimination was weeny. Interestingly, through the experiment with dimethyl sulfoxide as the probe, it was considered that the high-valent nickel-oxo species (Ni^&+=O), generated after the interaction of NiCx-CN and PMS, was the dominating reactive oxygen species (ROS). Theoretical calculations (DFT) implied that NiCx-CN might lose electrons to generate high-valent Ni, which was consistent with the detection of Ni³⁺ on the surface of the used NiCx-CN. Besides, the prepared NiCx-CN showed advantages in resisting the interference of inorganic anions. Meanwhile, three BPA degradation routes had been proposed based on the transformation intermediates. This study will establish a new protocol for PMS activation using heterogeneous Ni-based catalysts to efficiently degrade organic pollutants via a nonradical mechanism.

Defective iron based metal-organic frameworks derived from zero-valent iron for highly efficient fenton-like catalysis

Introducing crystal defects into iron based metal-organic frameworks (Fe-MOFs) is regarded as a promising strategy to enhance Fenton-like performance. However, developing a facile and effective strategy to construct defective Fe-MOFs as highly efficient Fenton-like catalyst is still a challenge. Herein, MIL-100(Fe) (Def-MIL-100(Fe)) with missing ligands defects was synthesized by a simple heterogeneous reaction using zero-valent iron. The bisphenol A degradation efficiency in the Def-MIL-100(Fe)/H₂O₂ system reached up to 91.26% within 10 min at pH 4 with a low catalyst dosage of 0.05 g/L, while the perfect MIL-100(Fe) has almost no Fenton-like performance. It was observed that missing ligands defects in the Def-MIL-100(Fe) play a key role in the Fenton-like reaction. The missing ligands defects could increase the Lewis acidity for fast H₂O₂ adsorption and accelerate the electron transfer between Fe^II and Fe^III cycling, leading to faster and more·OH generation. Moreover, the missing ligands defects could promote the mass transfer for improving·OH utilization efficiency. This work provides a novel strategy to construct defective Fe-MOFs as highly efficient Fenton-like catalyst to degrade organic pollutants in water.

Pesticide content analysis of red and yellow watermelon juices through a solid phase microextraction using a green copper-based metal-organic framework synthesized in water followed by a liquid phase microextraction procedure

For the first time, this survey demonstrates the use of MIL-53 (Cu) in an analytical method for the detection and determination of some pesticides through their extraction and preconcentration from red and yellow watermelon juices. The other predominance of the research is using a green metal-organic framework that is based on copper and synthesized in deionized water. After conducting the synthesis process, Fourier transform infrared spectrophotometry, X-ray diffraction, scanning electron microscopy, and nitrogen adsorption/desorption analyses were carried out. In the analytical approach, the samples were accompanied by the sorbent addition and vortexed to facilitate the sorption of the analytes onto the sorbent and then centrifuged to be settled down. Then, the analyte-loaded sorbent particles were treated with mL-volume of acetonitrile and subjected to vortexing and centrifugation. Eventually, the eluate was mixed with μL-level of carbon tetrachloride and instantly injected into deionized water. The resulting milky solution was centrifuged and consequently, the sedimentation of the organic phase occurred at the bottom of the conical glass test tube. An aliquot of it was injected into a gas chromatograph equipped with flame ionization detector. Low limits of detection (0.85-1.24 μg L^-1) and quantification (2.80-4.10 μg L^-1), high enrichment factors (275-330), and reasonable extraction recoveries (55-66%) were the main achievements of the presented method. It is worthwhile to be confessed that chlorpyrifos was detected in red watermelon juice at a concentration of 27 ± 2 μg L^-1.

Redox-Active Polymers as Robust Electron-Shuttle Co-Catalysts for Fast Fe3+/Fe2+ Circulation and Green Fenton Oxidation

Accelerating the rate-limiting Fe³⁺/Fe²⁺ circulation in Fenton reactions through the addition of reducing agents (or co-catalysts) stands out as one of the most promising technologies for rapid water decontamination. However, conventional reducing agents such as hydroxylamine and metal sulfides are greatly restricted by three intractable challenges: (1) self-quenching effects, (2) heavy metal dissolution, and (3) irreversible capacity decline. To this end, we, for the first time, introduced redox-active polymers as electron shuttles to expedite the Fe³⁺/Fe²⁺ cycle and promote H₂O₂ activation. The reduction of Fe³⁺ mainly took place at active N-H or O-H bonds through a proton-coupled electron transfer process. As electron carriers, H atoms at the solid phase could effectively inhibit radical quenching, avoid metal dissolution, and maintain long-term reducing capacity via facile regeneration. Experimental and density functional theory (DFT) calculation results indicated that the activity of different polymers shows a volcano curve trend as a function of the energy barrier, highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) gap, and vertical ionization potential. Thanks to the appropriate redox ability, polyaniline outperforms other redox-active polymers (e.g., poypyrrole, hydroquinone resin, poly(2,6-diaminopyridine), and hexaazatrinaphthalene framework) with a highest iron reduction capacity up to 5.5 mmol/g, which corresponds to the state transformation from leucoemeraldine to emeraldine. Moreover, the proposed system exhibited high pollutant removal efficiency in a flow-through reactor for 8000 bed volumes without an obvious decline in performance. Overall, this work established a green and sustainable oxidation system, which offers great potential for practical organic wastewater remediation.

Single cobalt atom anchored on carbon nitride with cobalt nitrogen/oxygen active sites for efficient Fenton-like catalysis

As one of the tactics to produce reactive oxygen radicals, the Fenton-like process has been widely developed to solve the increasingly severe problem of environmental pollution. However, establishing advanced mediators with sufficient stability and activity for practical application is still a long-term objective. Herein, we proposed a facile strategy through polymeric carbon nitride (pCN) in-situ growth single cobalt atom for efficient degradation of antibiotics by peroxymonosulfate (PMS) activation. X-ray absorption spectroscopy and high-angle annular dark field-scanning transmission electron microscopy prove the single cobalt atoms are successfully anchored on pCN. Moreover, extended X-ray absorption fine structure analysis shows that the embedded cobalt atoms are constructed by covalently forming the Co-N bond and Co-O bond, which endow the single-atom cobalt catalyst with high stability. Experiment results indicate that the prepared single-atom cobalt catalyst can be used for efficient PMS activation catalytic degradation of tetracycline with a high degradation rate of 98.7 % in 60 min. And the CoN/O sites with single cobalt atoms serve as the active site for generating active radical species (singlet oxygen) from PMS activation. This work may expand the strategy for constructing single-atom catalysts and extend its application for the advanced oxidation process.

Preparation of copper-based catalysts from electroplating sludge by ultrasound treatment and their antibiotic degradation performance

The recovery of heavy metals from electroplating sludge is important for alleviating heavy metal pollution and recycling metal resources. However, the selective recovery of metal resources is limited by the complexity of electroplating sludge. Herein, CuFe bimetallic Fenton-like catalysts were successfully prepared from electroplating sludge by a facile room-temperature ultrasonic-assisted co-precipitation method. The prepared CuFe-S mainly consisted of nanorods with diameters of 20-30 nm and lengths of 100-200 nm and a small number of irregular particles. Subsequently, we performed tetracycline (TC) degradation experiments, and the results showed that the product CuFe-S had very good performance over a wide pH range (2-11). At an initial pH = 2, CuFe-S could degrade 91.9% of 50 mg L^-1 TC aqueous solution within 30 min, which is better than that of a single metal catalyst. Free radical scavenging experiments and electron paramagnetic resonance (EPR) tests revealed that ·OH was the main active species for the degradation of TC by CuFe-S. In conclusion, a CuFe bimetallic Fenton-like catalyst was developed for the catalytic degradation of antibiotics, which provides a novel technical route for the resource utilization of electroplating sludge and shows an important practical application prospect.

Amorphous zirconium oxide activates peroxymonosulfate for selective degradation of organic compounds: Performance, mechanisms and structure-activity relationship

Application of heterogeneous advanced oxidation processes (AOPs) for wastewater treatment suffers from the low oxidant utilization efficiency, slow catalytic cycling and severe matrix interference. Herein, we report that amorphous zirconium dioxide (aZrO₂), a redox-inert metal oxide, can efficiently activate peroxymonosulfate (PMS) to degrade organic micropollutants under very low oxidant doses and complex coexisting matrices. Distinct from conventional AOPs where radicals are formed, the surface Zr(IV)-PMS* complex was identified as the principal reactive species, and primarily conducted oxygen-atom-transfer route with selected molecules. Quantitative structure-activity relationship analysis indicated that the formation of Zr(IV)-PMS* complex was governed by the density of the surface hydroxyl groups. The strong interaction between the Zr atom and PMS caused the deviation of the negative charge from Zr(IV) metal sites to the oxidant. As a result, the O-O bond of the adsorbed PMS was prolonged and its oxidation potential elevated, which enabled it to directly react with contaminants. This study indicates the potential of aZrO₂ as a novel and eco-friendly catalyst that activates PMS to selectively tackle organic contaminants, and sheds light on the designing of Fenton-like catalysts using redox-inert metals.

Reduced Graphene Oxide-Coated CuFeO2 with Fenton-like Catalytic Degradation Performance for Terramycin

A novel Fenton-like catalyst made of reduced graphene oxide-coated CuFeO₂ (rGO-coated CuFeO₂) was synthesized by the hydrothermal reaction method to remove terramycin from aqueous solutions. The catalytic degradation performance of rGO-coated CuFeO₂ for terramycin was verified with H₂O₂ activation. The characterization reveals that rGO-coated CuFeO₂ has a micro- and mesoporous structure, with groups such as C=C/C-C, CH₂-CO, and HO-C=O found on the surface. The Fenton-like catalytic degradation of terramycin by rGO-coated CuFeO₂ was in line with the pseudo-second-order kinetic model, and the elevated temperature accelerated the reaction. Terramycin was catalytically degraded by rGO-coated CuFeO₂ in two steps: terramycin was first adsorbed by rGO, and then Fenton-like degradation took place on its surface. This research presents new insight into the design and fabrication of Fenton-like catalysts with enhanced performance.

Core-Shell Hierarchical Fe/Cu Bimetallic Fenton Catalyst with Improved Adsorption and Catalytic Performance for Congo Red Degradation

The preparation of heterogeneous Fenton catalysts with both adsorption and catalytic properties has become an effective strategy for the treatment of refractory organic wastewater. In this work, 4A-Fe@Cu bimetallic Fenton catalysts with a three-dimensional core-shell structure were prepared by a simple, template-free, and surfactant-free methodology and used in the adsorption and degradation of Congo red (CR). The results showed that the open three-dimensional network structure and the positive charge of the surface of the 4A-Fe@Cu catalyst could endow a high adsorption capacity for CR, reaching 432.9 mg/g. The good adsorption property of 4A-Fe@Cu for CR not only did not inactivate the catalytic site on 4A-Fe@Cu but also could promote the contact between CR and the active sites on the catalyst surface and accelerate the degradation process. The 4A-Fe@Cu bimetallic catalyst exhibited higher catalytic activity than monometallic 4A@Cu and/or 4A-Fe catalysts due to low work function value. The effects of different pH, H2O2 dosages, and catalyst dosages on the catalytic performance of 4A-Fe@Cu were explored. In the conditions of 7.2 mM H2O2, 2 g/L 4A-Fe@Cu, and 1 g/L CR solution, the degradation ratio of CR by 4A-Fe@Cu could reach 99.2% at pH 8. This strategy provided guidance to the design of high-performance Fenton-like catalysts with both adsorption and catalysis properties for dye wastewater treatment.

Rapid degradation of organic pollutants by Fe3O4@PDA/Ag catalyst in advanced oxidation process

Over the past decades, the development of novel catalysts on the degradation of organic pollutants has attracted increasing attention. In this work, we synthesized silver decorated magnetic nanoparticles (Fe₃O₄@PDA/Ag NPs) to activate H₂O₂ for organic pollutants removal via advanced oxidation processes (AOPs). The catalyst was prepared through in-situ reduction of AgNO₃ by the polydopamine (PDA) layer on Fe₃O₄ NPs. Chemiluminescence results obtained from luminol/H₂O₂ system revealed that the catalyst exhibited excellent catalytic effect on the decomposition of H₂O₂ into reactive oxygen species (ROS) and superoxide radical (O₂^-) was mainly responsible for the oxidative degradation. Importantly, the fast evolution frequency of oxygen gas bubbles produced in the reaction of Ag NPs and H₂O₂ could generate vigorous fluid convection and autonomous motion of catalyst when H₂O₂ concentration reached 1%. Additionally, the catalyst can suspend in solution for several minutes. Therefore, by coupling the vigorous motion with slow sedimentation velocity, the catalyst can realize rapid degradation of organic pollutants without external mixing force. The Fe₃O₄@PDA/Ag NPs catalysts not only showed a high removal efficiency of malachite green, but also can be applied for the degradation of other dyes, making it to be a promise candidate for environmental remediation. With the merits of excellent catalytic effect, fast degradation speed, and simplicity of operation, the prepared catalysts exhibits great potential in the practical field.

Enhanced photo-Fenton degradation of tetracycline hydrochloride by 2, 5-dioxido-1, 4-benzenedicarboxylate-functionalized MIL-100(Fe)

Heterogeneous photo-Fenton technology has drawn tremendous attention for removal of recalcitrant pollutants. Fe-based metal-organic frameworks (Fe-MOFs) are regarded to be superior candidates in wastewater treatment technology. However, the central metal sites of the MOFs are coordinated with the linkers, which reduces active site exposure and decelerates H₂O₂ activation. In this study, a series of 2, 5-dioxido-1, 4-benzenedicarboxylate (H₂DOBDC)-functionalized MIL-100(Fe) with enhanced degradation performance was successfully constructed via solvothermal strategy. The modified MIL-100(Fe) displayed an improvement in photo-Fenton behaviors. The photocatalytic rate constant of optimized MIL-100(Fe)-1/2/3 are 2.3, 3.6 and 4.4 times higher compared with the original MIL-100(Fe). The introduced H₂DOBDC accelerates the separation and transfer in photo-induced charges and promotes Fe(II)/Fe(III) cycle, thus improving the performance. •OH and •O₂^- are main reactive radicals in tetracycline (TCH) degradation. Dealkylation, hydroxylation, dehydration and dealdehyding are the main pathways for TCH degradation.

Enhanced degradation of tetracycline over FeS-based Fenton-like process: Autocatalytic decomposition of H2O2 and reduction of Fe(III)

This study constructed a FeS-based Fenton-like process to explore the degradation of TTC in the presence of copper ions. The acidic condition of pH 3 was more favorable to the H₂O₂ decomposition and TTC degradation, and it was slightly enhanced by Cu(II). The production of •OH from H₂O₂ was revealed through radical scavenging and benzoic acid probe experiments, and the ratio of H₂O₂ decomposition to •OH production was about 1-1.5, which is comparatively consistent with the theoretical ratio. FeS-based Fenton process was proved to be a homogenous system, the slow release of Fe(II) source and the autocatalytic cycle of Fe(III) to Fe(II) resulting from the reductive species of TTC and dissolved S(-II) improved the production of •OH and the degradation of TTC, which was proved by comparing TTC degradation, TOC removal, H₂O₂ decomposition and Fe(II) concentration with different iron sources (FeS, Fe(II) and Fe(III)) and external addition of dissolved S(-II). The possible degradation pathways of TTC were subsequently inferred according to the detected products by LC-MS. Understanding these autocatalytic processes is essential to reveal the transformation of redox-active substances in environments and may have potential significance in applying FeS-based Fenton-like process for the treatment of wastewater containing reductive organic matters.

Surface-catalyzed electro-Fenton with flexible nanocatalyst for removal of plasticizers from secondary wastewater effluent

Activation of H₂O₂ with metal-free catalysts is an efficient and environmentally benign alternative to electron-Fenton (EF) for organics degradation. In the present study, flexible nanocatalysts were synthesized with self-regulated metal oxide nanoparticles (FeOx NPs) for efficient removal of plasticizers from secondary wastewater effluent (SWE). Compared with NGr/EF and FeOx@Gr/EF systems, FeOx@NGr/EF could enhance the decay kinetics of plasticizers by 3.9-4.4 times and reduce 48-59% of the disposal cost. Reactive oxygen species tests and trapping experiments proved that the surface-catalyzed EF effectively broadened the range of solution pH. Density functional theory calculations coupled with electrochemical measurements indicated that the electron transfer rates between Fe-O-C atoms were enhanced with N-doping due to strong interactions between N-Fe bond. The synergistic effects of FeOx and N could improve the oxygen reduction activity for H₂O₂ generation, and accelerate electron transfer between FeOx/NGr and H₂O₂ for ^•OH generation, offering an alternative for wastewater treatment.

Single-Atom Iron Anchored Tubular g-C3 N4 Catalysts for Ultrafast Fenton-Like Reaction: Roles of High-Valency Iron-Oxo Species and Organic Radicals

Single-atom catalysts have emerged as an efficient oxidant activator for eliminating organic pollutants in Fenton-like systems. However, the complex preparation, single active site, lack of understanding of the fundamental mechanism, and harsh pH conditions currently limit their practical applications. In this work, single-atom iron anchored nitrogen-rich g-C₃ N₄ nanotubes (FeCNs) are designed and synthesized by a facile approach, and eco-friendly peracetic acid (PAA) is selected as the oxidant for Fenton-like reactions. The constructed heterogenous system achieves an enhanced degradation of various organic contaminants over a wide pH range of 3.0-9.0, exhibiting an ultrahigh and stable catalytic activity, outperforming equivalent quantities of pristine g-C₃ N₄ by 75 times. The ¹⁸ O isotope-labeling technique, probe method, and theoretical calculations demonstrate that the efficient catalytic activity relies on the high-valency iron-oxo species coupled with organic radicals generated by PAA. An increase in electron transport from the contaminant to the formed "metastable PAA/FeCN catalyst surface complex" is detected. A double driving mechanism for the tubular g-C₃ N₄ regulated by a single Fe site and PAA activation is proposed. This work opens an avenue for developing novel catalysts with the coexistence of multiple active units and providing opportunities for significantly improving catalytic efficiency.

Unraveling timescale-dependent Fe-MOFs crystal evolution for catalytic ozonation reactivity modulation

Iron-based metal-organic frameworks (Fe-MOFs) have been considered competitive catalyst candidates for the effective degradation of organic pollutants via advanced oxidation processes (AOPs) due to their unique porous architecture and tunable active site structure. However, little is known about the role of synergetic relationship between porous architecture and active site exposure of Fe-MOFs on catalysis for AOPs yet. Here, we demonstrated an overlooked compromise over these two features on modulating the catalytic ozonation reactivity of MIL-53(Fe) through a timescale-dependent crystal evolution. Enabled by intramolecular hydrogen bonds, the MIL-53(Fe) was subjected to six evolution steps in terms of crystal morphology, leading to a volcano plot of catalytic ozonation reactivity for Rhodamine B (RhB) degradation versus the crystallization time. Evidence suggested that the surface area of MIL-53(Fe) decreased dramatically, while the density of accessible active site increased when prolonging crystallization time, allowing for the facile modulation of catalytic ozonation reactivity of MIL-53(Fe). Electron paramagnetic resonance and fluorescence quantification tests verified that the screened MIL-53(Fe)s had a much better capacity for ∙OH generation than benchmark ozonation catalyst α-MnO₂ and α-FeOOH. Moreover, the MIL-53(Fe) with the highest reactivity (i.e., MIL-53(Fe)-18H) could effectively destruct a broad spectrum of emerging and refractory organic pollutants and allow the thorough purification of secondary effluents discharged from textile dyeing & finishing industry for in situ reuse. Therefore, our study advances the understanding of the compromise effect between porous architecture and active site on catalysis reactivity of Fe-MOFs and promotes the rational design of more effective Fe-MOFs as well as their derivatives for environmental applications.

Highly efficient activation of peracetic acid by nano-CuO for carbamazepine degradation in wastewater: The significant role of H2O2 and evidence of acetylperoxy radical contribution

Peracetic acid (PAA)-based advanced oxidation processes (AOPs) has attracted increasing attentions towards contaminant degradation in the wastewater treatment. Herein, we report the efficient activation of PAA by nano-CuO (nCuO/PAA) to degrade carbamazepine (CBZ) for the first time. Rapid degradation of CBZ was observed in the nCuO/PAA system at neutral initial pH. A new scavenging experiment with Mn²⁺ as a specific scavenger was developed to distinguish the dominant role of CH₃C(O)OO^● for CBZ degradation in the nCuO/PAA process. The oxidation of CBZ by CH₃C(O)OO^● was verified to proceed via the electrons transfer, and the acute and chronic toxicity of the transformation products was significantly reduced. The efficient activation of PAA by nCuO was found to be realized through continuous conversion of Cu(II) to Cu(I), which was significantly boosted by co-existing H₂O₂. The nCuO/PAA process was slightly affected by the water matrices, and maintained high efficiency in real water samples. The findings obtained in this study provide new insights into the catalytic formation of CH₃C(O)OO^● from PAA and facilitate the development and application of PAA-based AOPs in wastewater treatment.

The strong promoting effects of thin layer Al2O3 on FeCu Fenton-like components: Enhanced electron transfer

The Fe(III)/Fe(II) redox cycle is the main factor limiting the effectiveness of Fe-mediated advanced oxidation processes (AOPs) for the degradation of organic pollutants. In this study, the promoting effects of thin-layer Al₂O₃ (t-Al₂O₃) between the frequently used FeCu components and the mesoporous silica support were studied to reduce Fe(III) to promote the activity of the Fenton-like catalyst. After modification by t-Al₂O₃, the mesoporous silicon-loaded FeCu catalyst removed 97% of Rhodamine B at pH 7, which was superior to the unmodified sample with a removal rate of 62.4% under the same conditions. Morphological characterization and X-ray diffraction patterns indicated that the Fe-Cu/t-Al₂O₃ active components were highly dispersed. Pyridine infrared spectra suggested that all of the acid sites were Lewis acids, and the t-Al₂O₃-loaded samples provided moderate/strong Lewis acids. The loading of t-Al₂O₃ between the FeCu complex and mesoporous silica support facilitated electron transfer during the Fe(III)/Fe(II) redox cycle by enhancing the dispersion of Fe-Cu/t-Al₂O₃ and the Lewis acidity. The results of this study provide insight into how t-Al₂O₃ promoted the interactions between the active components and silica support and how it can be used to aid in the selection of suitable wastewater treatment technologies.

Enhanced degradation of micropollutants over iron-based electro-Fenton catalyst: Cobalt as an electron modulator in mesochannels and mechanism insight

Heterogeneous electro-Fenton (hetero-EF) process is an emerging alternative for effective oxidation of recalcitrant micropollutants, but it is hampered by limited hydroxyl radical (•OH) generation and low stability on the iron-based cathodes. Herein, we demonstrate an enhanced hetero-EF performance via modulation of iron electronic structure in an ordered mesoporous carbon (OMC). By tuning the cobalt incorporation, the highly-dispersed iron-cobalt (FeCo) nanoalloys in mesochannels (Fe_0.5Co_0.5@OMC) show a 3-fold increase in •OH yield compared with Fe@OMC, achieving degradation efficiency with 92% of sulfamethazine (SMT) and 99% of rhodamine B (RhB), and the corresponding total organic carbon (TOC) removal with 66% of SMT and 85% of RhB within 2 h in neutral pH, respectively. Experimental results and density functional theory (DFT) calculations demonstrate that iron incorporated with cobalt reduces energy barrier for facile generation of H₂O₂ and •OH from O₂ through direct electron transfer, along with decreased overpotential. Meanwhile, cobalt doping promotes H₂O₂ decomposition by accelerated Fe(II)/Fe(III) cycle and Co(II)/Co(III) redox. Furthermore, spatially confined and half-embedded structure endows the nanocatalyst (8 nm) excellent durability within a wide pH value range and good stability in cycle tests. A plausible reaction mechanism and degradation pathway for SMT are proposed. Moreover, the superiority of Fe_0.5Co_0.5@OMC cathode is maintained in simulated wastewater, suggesting an enormous potential in practical wastewater treatment.

Construction of Bi2WO6/CoAl-LDHs S-scheme heterojunction with efficient photo-Fenton-like catalytic performance: Experimental and theoretical studies

The photo-Fenton-like catalytic process has shown great application potential in environmental remediation. Herein, a novel photo-Fenton-like catalyst of Bi₂WO₆ nanosheets decorated hortensia-like CoAl-layered double hydroxides (Bi₂WO₆/CoAl-LDHs) was synthesized via hydrothermal process. The optimized Bi₂WO₆/CoAl-LDHs composite performed the high-efficiency photo-Fenton-like catalytic performance for oxytetracycline (OTC) removal (98.47%) in the mediation of visible-light and H₂O₂. The comparative experiment, technical characterization and density functional theory calculation results indicated that the efficient photo-Fenton-like catalytic performance of Bi₂WO₆/CoAl-LDHs was attributed to the synergistic action of the Fenton-like process of cobalt ions in CoAl-LDHs, an internal electric field and the S-scheme heterojunction form between Bi₂WO₆ and CoAl-LDHs, which could significantly promote the active substance formation and the photocatalytic process in the catalytic system. This study will stimulate the new inspiration of designing the efficient catalytic system for environmental remediation and other fields.

Iron-based metal-organic framework derived pyrolytic materials for effective Fenton-like catalysis: Performance, mechanisms and practicability

In this study, a new catalyst was fabricated by pyrolysis under nitrogen atmosphere with MIL-53(Fe) as the precursor, and was applied to catalyze Fenton-like process. Effects of calcination temperature and pH on decontamination performance, and stability of materials were investigated. Under optimal conditions (calcination temperature of 500 °C and pH of 5.0), the new Fenton-like system remained low iron leaching, and achieved high pseudo-first-order rate constant of 0.0251 min^-1 for bisphenol S (BPS) removal, which is much higher than those in MIL-53(Fe), and nano-Fe₃O₄ catalyzed Fenton-like systems. The superiority of the new catalyst for Fenton-like catalysis was attributed to high specific surface area, as well as formed Fe(II), coordinatively unsaturated iron center and the Fe-O/Fe-C compounds based on the analyses of characterizations. Furthermore, main active species for BPS degradation was identified as hydroxyl radicals, and total hydroxyl radical generation was determined by trapping experiments. The degradation pathways of BPS were also proposed by intermediates monitoring. Moreover, this catalyst showed good potential for practical application, according to the evaluation of reuse, different pollutants degradation, and BPS removal in real wastewater. We believe this study developed a new catalyst with high catalytic activity, high stability and wide application scope, and also sheds light on further development of metal-organic frameworks for Fenton-like catalysis.

Self-Enhanced Selective Oxidation of Phosphonate into Phosphate by Cu(II)/H2O2: Performance, Mechanism, and Validation

Phosphonate is an important category of highly soluble organophosphorus in contaminated waters, and its oxidative transformation into phosphate is usually a prerequisite step to achieve the in-depth removal of the total phosphorus. Currently, selective oxidation of phosphonate into phosphate is urgently desired as conventional advanced oxidation processes suffer from severe matrix interferences. Herein, we employed 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) as a model phosphonate and demonstrated its efficient and selective oxidation by the Cu(II)/H₂O₂ process at alkaline pH. In the presence of trace Cu(II) (0.020 mM), 90.8% of HEDP (0.10 mM) was converted to phosphate by H₂O₂ in 30 min at pH 9.5, whereas negligible conversion was observed by UV/H₂O₂ or a Fenton reaction (pH = 3.0). The oxidation of HEDP by Cu(II)/H₂O₂ was insignificantly affected by natural organic matters (10.0 mg TOC/L) and various anions including chloride, sulfate, and nitrate (10.0 mM). The complexation of Cu(II) with HEDP coupling Cu(III) produced in situ enabled an intramolecular electron transfer process, which features high selective oxidation. Selective degradation of HEDP was further validated by adding stoichiometric H₂O₂ into an industrial effluent, where the existing Cu(II) could serve as the catalyst. This study also provides a successful case to trigger selective oxidation of trace pollutants of concern upon synergizing with the nature of the contaminated water.

Insights into enhanced removal of 1,2-dichloroethane by amorphous boron-enhanced Fenton system: Performances and mechanisms

In this study, amorphous boron was employed as a reductant in traditional Fenton system for the first time to accelerate the regeneration of Fe(II). The degradation of 1,2-dichloroethane (DCA) was only 40.0% in Fenton system, while in the presence of amorphous boron, it could reach to 93.0% in 60 min. HO• was demonstrated to be the major reactive oxygen species (ROSs) and responsible for DCA degradation. Further, the mechanism of amorphous boron-enhanced Fenton system was described as follows. With the addition of amorphous boron, the reduction process occurred on its surface and Fe(III) was regenerated to Fe(II) to further utilize H₂O₂ and produce more HO• for DCA removal. Meanwhile, amorphous boron was oxidized to B₂O₃ and a portion of H₃BO₃ leaching into the solution occurred. Both B₂O₃ and H₃BO₃ had no reactivity for Fe(III) reduction. Moreover, DCA could be entirely dechlorinated and mineralized to CO₂, Cl^- and H₂O. Vinyl chloride (VC) and dichloromethane (DCM) were the mainly intermediates in DCA degradation and two possible pathways were inferred. Eventually, the performance of DCA degradation in complex solution matrixes and for other contaminants removal were tested, demonstrating the broad-spectrum reactivity and superiority of amorphous boron-enhanced Fenton system in the remediation of contaminated groundwater.

Efficient degradation of sulfamethazine via activation of percarbonate by chalcopyrite

In this work, the novel application of chalcopyrite (CuFeS₂) for sodium percarbonate (SPC) activation towards sulfamethazine (SMT) degradation was explored. Several key influencing factors like SPC concentration, CuFeS₂ dosage, reaction temperature, pH value, anions, and humic acid (HA) were investigated. Experimental results indicated that SMT could be effectively degraded in the neutral reaction media by CuFeS₂/SPC process (86.4%, 0.054 min^-1 at pH = 7.1). The mechanism of SPC activation by CuFeS₂ was elucidated, which was discovered to be a multiple reactive oxygen species (multi-ROS) process with the coexistence of hydroxyl radical (^•OH), carbonate radical (CO₃^•-), superoxide radical (O₂^•-), and singlet oxygen (¹O₂), as evidenced by quenching experiments and electron spin resonance (ESR) tests. The generated ^•OH via the traditional heterogeneous Fenton-like process would not only react with carbonate ions to yield other ROS but also involve in SMT degradation. The abundant surface-bound Fe(II) was deemed to be the dominant catalytic active sites for SPC activation. Meanwhile, it was verified that the reductive sulfur species, the interaction between Cu(I) and Fe(III) as well as the available O₂^•- derived from the activation of molecular oxygen and the conversion of ^•OH favored the regeneration of Fe(II) on CuFeS₂ surface. Furthermore, the degradation intermediates of SMT and their toxicities were evaluated. This study presents a novel strategy by integrating transition metal sulfides with percarbonate for antibiotic-contaminated water treatment.

Multi-walled carbon nanotubes facilitated Roxarsone elimination in SR-AOPs by accelerating electron transfer in modified electrolytic manganese residue and forming surface activated-complexes

A novel catalyst (MT/EMR) used for SR-AOPs with high removal efficiency toward roxarsone (ROX) (90.96% within 60 min) was prepared for the first time by ball milling multi-walled carbon nanotubes (MWCNTs) with electrolytic manganese residue (EMR). The incorporation of MWCNTs could improve the adsorption capacity and accelerate the transformation of metals in EMR with partial mass loss to facilitate the PDS activation. Additionally, pH test, quenching experiment and electrochemical test verified a two-electron pathway involving surface activated-complex contributed to the directly ROX oxidization. Benefit from the introduction of MWCNTs, the degradation rate (k_obs) of catalytic reaction was increased by 10.1 times compared with that of single-EMR. Additionally, the M-O-C (M=Fe or Mn) bonds in MT/EMR making the catalyst more stable than EMR. This work provided a novel and effective strategy to establish waste solid-based catalysts for green preparation and expanded the adsorption-oxidation technology to solve the problem of organoarsenic pollution.

Membrane-Confined Iron Oxychloride Nanocatalysts for Highly Efficient Heterogeneous Fenton Water Treatment

Heterogeneous advanced oxidation processes (AOPs) allow for the destruction of aqueous organic pollutants via oxidation by hydroxyl radicals (^•OH). However, practical treatment scenarios suffer from the low availability of short-lived ^•OH in aqueous bulk, due to both mass transfer limitations and quenching by water constituents, such as natural organic matter (NOM). Herein, we overcome these challenges by loading iron oxychloride catalysts within the pores of a ceramic ultrafiltration membrane, resulting in an internal heterogeneous Fenton reaction that can degrade organics in complex water matrices with pH up to 6.2. With ^•OH confined inside the nanopores (∼ 20 nm), this membrane reactor completely removed various organic pollutants with water fluxes of up to 100 L m^-2 h^-1 (equivalent to a retention time of 10 s). This membrane, with a pore size that excludes NOM (>300 kDa), selectively exposed smaller organics to ^•OH within the pores under confinement and showed excellent resiliency to representative water matrices (simulated surface water and sand filtration effluent samples). Moreover, the membrane exhibited sustained AOPs (>24 h) and could be regenerated for multiple cycles. Our results suggest the feasibility of exploiting ultrafiltration membrane-based AOP platforms for organic pollutant degradation in complex water scenarios.

Insights into the peroxomonosulfate activation on boron-doped carbon nanotubes: Performance and mechanisms

Preparation of carbonaceous catalysts by doping with boron (B) is one of the most promising strategies for substitution of toxic transition metal catalysts in advanced oxidation processes. This study was dedicated to reveal the intrinsic structure-performance relationship of peroxomonosulfate (PMS) activation by B-doped carbon nanotubes toward catalytic oxidation of pollutants. Performance tests showed the catalyst realized more than 95% phenol removal at pH 7 in 1 h and 69.4% total organic carbon removal. The catalysts were characterized using scanning electron microscopy (SEM), transmission electron microscope (TEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR). Characterization results indicated that the topography of carbon nanotube was not significantly changed after B doped, while the defect sites increased from 1.05 to 1.23. The newly formed active sites may be presented in the form of C₃B, CBO₂ and CBO₃, and reactive oxygen species (ROS) including OH, SO₄^-•, O₂^-• and ¹O₂ might be generated after activation by the active sites. Furthermore, B-MWNT-PMS∗ was also be detected by In-situ Raman, confirming the non-radical pathway and electron transfer mechanism. Beside of phenol, the reaction system of B-MWNT/PMS also can remove methylene blue, bisphenol S and diuron at pH = 7, confirming the universality and promising of this advanced oxidation technology.