Passive Sampling and Dosing of Aquatic Organic Contaminant Mixtures for Ecotoxicological Analyses

High-Efficiency Effect-Directed Analysis Leveraging Five High Level Advancements: A Critical Review

Organic contaminants are ubiquitous in the environment, with mounting evidence unequivocally connecting them to aquatic toxicity, illness, and increased mortality, underscoring their substantial impacts on ecological security and environmental health. The intricate composition of sample mixtures and uncertain physicochemical features of potential toxic substances pose challenges to identify key toxicants in environmental samples. Effect-directed analysis (EDA), establishing a connection between key toxicants found in environmental samples and associated hazards, enables the identification of toxicants that can streamline research efforts and inform management action. Nevertheless, the advancement of EDA is constrained by the following factors: inadequate extraction and fractionation of environmental samples, limited bioassay endpoints and unknown linkage to higher order impacts, limited coverage of chemical analysis (i.e., high-resolution mass spectrometry, HRMS), and lacking effective linkage between bioassays and chemical analysis. This review proposes five key advancements to enhance the efficiency of EDA in addressing these challenges: (1) multiple adsorbents for comprehensive coverage of chemical extraction, (2) high-resolution microfractionation and multidimensional fractionation for refined fractionation, (3) robust in vivo/vitro bioassays and omics, (4) high-performance configurations for HRMS analysis, and (5) chemical-, data-, and knowledge-driven approaches for streamlined toxicant identification and validation. We envision that future EDA will integrate big data and artificial intelligence based on the development of quantitative omics, cutting-edge multidimensional microfractionation, and ultraperformance MS to identify environmental hazard factors, serving for broader environmental governance.

Combining Passive Sampling and Dosing to Unravel the Contribution of Hydrophobic Organic Contaminants to Sediment Ecotoxicity

Contaminated sediments are ubiquitous repositories of pollutants and cause substantial environmental risks. Results of sediment bioassays remain difficult to interpret, however, as observed effects may be caused by a variety of (un)known stressors. This study aimed therefore to isolate the effects of hydrophobic organic contaminants from other (non)chemical stressors present in contaminated sediments, by employing a newly developed passive sampling-passive dosing (PSPD) test. The results showed that equilibrium partitioning between pesticides or polyaromatic hydrocarbons (PAHs) in contaminated sediments and a silicone rubber (SR) passive sampler was achieved after 1-3 days. Chlorpyrifos concentrations in pore water of spiked sediment matched very well with concentrations released from the SR into an aqueous test medium, showing that SR can serve as a passive dosing device. Subjecting the 96 h PSPD laboratory bioassay with nonbiting midge (Chironomus riparius) larvae to field-collected sediments showed that at two locations, concentrations of the hydrophobic organic contaminant mixtures were high enough to affect the test organisms. In conclusion, the developed PSPD test was able to isolate the effects of hydrophobic organic contaminants and provides a promising simplified building block for a suite of PSPD tests that after further validation could be used to unravel the contribution of hydrophobic organic chemicals to sediment ecotoxicity.

NSO-heterocyclic PAHs - Controlled exposure study reveals high acute aquatic toxicity

Environmental occurrence and hazardous nature of heterocyclic polyaromatic hydrocarbons (heterocyclic PAHs) has the potential to threaten the health of aquatic ecosystems. Here, we investigate the acute toxicity of heterocyclic PAHs (log KOW 3.7-6.9) to aquatic organisms: marine bacteria (Aliivibrio fischeri), freshwater green algae (Raphidocelis subcapitata), and water fleas (Daphnia magna) using passive dosing to maintain stable exposure. The membrane-water partition coefficient (KMW) of the heterocycles was measured to elucidate its relationship with toxicity. Our findings show that the tested heterocycles had little inhibitory effect on A. fischeri, while most compounds were highly toxic to R. subcapitata and D. magna. Toxicity generally increased with increasing KMW values, and nonpolar narcosis was identified as the most likely mode of toxic action of the heterocycles. Comparison of standard protocols with passive dosing emphasizes the importance of maintaining a constant concentration during toxicity testing, as very high losses occurred in standard tests and passive dosing experiments revealed higher toxicities. These results indicate a potentially high risk to aquatic life and call for more in-depth investigation of the (eco)toxic effects of NSO-PAHs.

Appraisal on the role of passive sampling for more integrative frameworks on the environmental risk assessment of contaminants

Over time multiple lines of research have been integrated as important components of evidence for assessing the ecological quality status of water bodies within the framework of Environmental Risk Assessment (ERA) approaches. One of the most used integrative approaches is the triad which combines, based on the weight-of-evidence, three lines of research, the chemical (to identify what is causing the effect), the ecological (to identify the effects at the ecosystem level) and the ecotoxicological (to ascertain the causes of ecological damage), with the agreement between the different lines of risk evidence increasing the confidence in the management decisions. Although the triad approach has proven greatly strategic in ERA processes, new assessment (and monitoring) integrative and effective tools are most welcome. In this regard, the present study is an appraisal on the boost that passive sampling, by allowing to increase information reliability, can give within each of the triad lines of evidence, for more integrative ERA frameworks. In parallel to this appraisal, examples of works that used passive samplers within the triad are presented providing support for the use of these devices in a complementary form to generate holistic information for ERA and ease the process of decision-making.

Chemometers: an integrative tool for chemical assessment in multimedia environments

We propose novel chemometers - passive equilibrium samplers of, e.g., silicone - as an integrative tool for the assessment of hydrophobic organic compounds in multimedia environments. The traditional way of assessing levels of organic pollutants across different environmental compartments is to compare the chemical concentration normalized to the major sorptive phase in two or more media. These sorptive phases for hydrophobic organic compounds differ between compartments, e.g., lipids in biota and organic carbon in sediments. Hence, comparability across media can suffer due to differences in sorptive capacities, but also extraction protocols and bioavailability. Chemometers overcome these drawbacks; they are a common, universal and well-defined polymer reference phase for sampling of a large range of nonpolar organic pollutants in different matrices like biota, sediment and water. When bringing the chemometer into direct contact with the sample, the chemicals partition between the sample and the polymer until thermodynamic equilibrium partitioning is established. At equilibrium, the chemical concentrations in the chemometers can be determined and directly compared between media, e.g., between organisms of different trophic levels or inhabiting different areas, between organs within an organism or between biotic and abiotic compartments, amongst others. Chemometers hence allow expressing the data on a common basis, as the equilibrium partitioning concentrations in the polymer, circumventing normalizations. The approach is based on chemical activity rather than total concentrations, and as such, gives a measure of the "effective concentration" of a compound or a mixture. Furthermore, chemical activity is the main driver for partitioning, biouptake and toxicity. As an additional benefit, the extracts of the chemometers only require limited cleanup efforts, avoiding introduction of a bias between chemicals of different persistence, and can be submitted to both chemical analysis and/or bioanalytical profiling.

Impacts of wastewater effluents and seasonal trends on levels of antipsychotic pharmaceuticals in water and sediments from two cold-region rivers

Most pharmaceuticals are found at trace concentrations in aquatic systems, but their continuous release and potential accumulation can lead to adverse health effects in exposed organisms. Concentrations can vary temporally, driven by variations in discharges of receiving waters, sorption to sediments, and other biotic and abiotic exchange processes. The principal aim of this research was to better understand the occurrence, trends, and dynamics of pharmaceuticals in a cold-climate, riverine environment. To this end, a suite of seven representative antipsychotic pharmaceuticals was measured upstream and downstream of two wastewater treatment plants (WWTPs) in Saskatchewan, Canada, located in the South Saskatchewan River and Wascana Creek, respectively, across three seasons. Concentrations of analytes were in the ng/L range and generally greater downstream of both WWTPs compared to upstream. Some compounds, including the tricyclic antidepressant amitriptyline, which was the most abundant analyte in water and sediment from both sites and across seasons, reached low μg/L concentrations. Data collected from this research effort indicate contamination with antipsychotic pharmaceuticals, with the potential to adversely impact exposed organisms.

Chemical and biological assessments of environmental mixtures: A review of current trends, advances, and future perspectives

Considering the chemical complexity and toxicity data gaps of environmental mixtures, most studies evaluate the chemical risk individually. However, humans are usually exposed to a cocktail of chemicals in real life. Mixture health assessment remains to be a research area having significant knowledge gaps. Characterization of chemical composition and bioactivity/toxicity are the two critical aspects of mixture health assessments. This review seeks to introduce the recent progress and tools for the chemical and biological characterization of environmental mixtures. The state-of-the-art techniques include the sampling, extraction, rapid detection methods, and the in vitro, in vivo, and in silico approaches to generate the toxicity data of an environmental mixture. Application of these novel methods, or new approach methodologies (NAMs), has increased the throughput of generating chemical and toxicity data for mixtures and thus refined the mixture health assessment. Combined with computational methods, the chemical and biological information would shed light on identifying the bioactive/toxic components in an environmental mixture.

Subnanometric alkaline-earth oxide clusters for sustainable nitrate to ammonia photosynthesis

The limitation of inert N2 molecules with their high dissociation energy has ignited research interests in probing other nitrogen-containing species for ammonia synthesis. Nitrate ions, as an alternative feedstock with high solubility and proton affinity, can be facilely dissociated for sustainable ammonia production. Here we report a nitrate to ammonia photosynthesis route (NO3-RR) catalyzed by subnanometric alkaline-earth oxide clusters. The catalyst exhibits a high ammonia photosynthesis rate of 11.97 mol gmetal-1 h-1 (89.79 mmol gcat-1 h-1) with nearly 100% selectivity. A total ammonia yield of 0.78 mmol within 72 h is achieved, which exhibits a significant advantage in the area of photocatalytic NO3-RR. The investigation of the molecular-level reaction mechanism reveals that the unique active interface between the subnanometric clusters and TiO2 substrate is beneficial for the nitrate activation and dissociation, contributing to efficient and selective nitrate reduction for ammonia production with low energy input. The practical application of NO3-RR route in simulated wastewater is developed, which demonstrates great potential for its industrial application. These findings are of general knowledge for the functional development of clusters-based catalysts and could open up a path in the exploitation of advanced ammonia synthesis routes with low energy consumption and carbon emission.