Controlling Factors of Microplastic Riverine Flux and Implications for Reliable Monitoring Strategy

Genome-Centric Metagenomics Insights into the Plastisphere-Driven Natural Degradation Characteristics and Mechanism of Biodegradable Plastics in Aquatic Environments

Biodegradable plastics (BPs) are pervasively available as alternatives to traditional plastics, but their natural degradation characteristics and microbial-driven degradation mechanisms are poorly understood, especially in aquatic environments, the primary sink of plastic debris. Herein, the three-month dynamic degradation process of BPs (the copolymer of poly(butylene adipate-co-terephthalate) and polylactic acid (PLA) (PBAT/PLA) and single PLA) in a natural aquatic environment was investigated, with nonbiodegradable plastics polyvinyl chloride, polypropylene, and polystyrene as controls. PBAT/PLA showed the weight loss of 47.4% at 50 days and severe fragmentation within two months, but no significant decay for other plastics. The significant increase in the specific surface area and roughness and the weakening of hydrophobicity within the first month promoted microbial attachment to the PBAT/PLA surface. Then, a complete microbial succession occurred, including biofilm formation, maturation, and dispersion. Metagenomic analysis indicated that plastispheres selectively enriched degraders. Based on the functional genes involved in BPs degradation, a total of 16 high-quality metagenome-assembled genomes of degraders (mainly Burkholderiaceae) were recovered from the PBAT/PLA plastisphere. These microbes showed the greatest degrading potential at the biofilm maturation stage and executed the functions by PLA_depolymerase, polyesterase, hydrolase, and esterase. These findings will enhance understanding of BPs' environmental behavior and microbial roles on plastic degradation.

Spatiotemporal response of microplastics to natural and anthropogenic factors in estuarine waters

Riverine outflow is the primary pathway for transporting microplastics from terrestrial to marine environments, making estuaries hotspots for microplastics pollution. However, how and to what extent natural and anthropogenic factors affect the distribution of microplastics in estuarine waters remains largely unknown. A meta-analysis of 126 estuaries from 93 studies revealed a global median microplastics abundance of 196.9 items/m3, with a range from 0.007 ± 0.003 to 792,000 ± 138,000 items/m3. Microplastics were more abundant in estuaries in Asia and Oceania compared to Europe and South America. The microplastic abundance in estuarine waters was positively correlated with regional population density, per capita plastic waste, agricultural land proportion, and silt content, while the human development index (HDI) and mean annual precipitation displayed negative effects on microplastic abundance. Notably, HDI was the dominant factor influencing microplastic abundance in estuarine waters. In developing countries, microplastic abundance in estuarine waters showed positive changes, whereas it remained stable in developed countries over time. This study offers critical insights into the effects of natural and anthropogenic factors on the distribution patterns of microplastics in estuarine waters, providing important support for future management of microplastics pollution in estuaries.

Settling velocity of microplastics in turbulent open-channel flow

The settling behavior of microplastics (MPs) plays a pivotal role in their transport and fate in aquatic environments, but the dominant mechanisms and physics governing the settling of MPs in rivers remain poorly understood. To gain mechanistic insights into the velocity lag of MPs in an open-channel flume under different turbulent flow conditions, an experimental study was conducted using three types of MPs: polystyrene, cellulose acetate, and acrylic, of sphere-shaped particles with diameters ranging from 1 mm to 5 mm. A particle tracking technique was employed to record and analyze the MPs velocity within turbulent flows. The results showed a variation in the vertical settling velocity of MPs ωMP ranging from -26 % to +16 %, when compared to their counterparts in still water (ωs). A new formula for the drag coefficient (Cd) of MP particles was developed by introducing the suspension number (u∗/ωs). The developed Cd formula was used to calculate the resultant velocity lag VMP, with a mean relative error of 16 % compared with the measured values. Further, the study highlighted that the MPs with large Stokes numbers are mainly driven by their own inertia and turbulence has less influence on their settling behavior. This study is crucial for understanding the settling behavior of MPs in turbulent flows and developing their transport and fate models for MPs in riverine systems.

Plastic debris exposure and effects in rivers: Boundaries for efficient ecological risk assessment

Until recently, plastic pollution research was focused on the marine environments, and attention was given to terrestrial and freshwater environments latter. This discussion paper aims to put forward crucial questions on issues that limit our ability to conduct reliable plastic ecological risk assessments in rivers. Previous studies highlighted the widespread presence of plastics in rivers, but the sources and levels of exposure remained matters of debate. Field measurements have been carried out on the concentration and composition of plastics in rivers, but greater homogeneity in the choice of plastic sizes, particularly for microplastics by following the recent ISO international standard nomenclature, is needed for better comparison between studies. The development of additional relevant sampling strategies that are suited to the specific characteristics of riverine environments is also needed. Similarly, we encourage the systematic real-time monitoring of environmental conditions (e.g., topology of the sampling section of the river, hydrology, volumetric flux and velocity, suspended matters concentration) to better understand the origin of variability in plastic concentrations in rivers. Furthermore, ingestion of microplastics by freshwater organisms has been demonstrated under laboratory conditions, but the long-term effects of continuous microplastic exposure in organisms are less well understood. This discussion paper encourages an integrative view of the issues involved in assessing plastic exposure and its effects on biota, in order to improve our ability to carry out relevant ecological risk assessments in river environments.

Occurrence of microplastics in the headwaters of Yellow River on the Tibetan Plateau: Source analysis and ecological risk assessment

The widespread occurrence of Microplastics (MPs) has aroused increasing concerns. However, the fate of MPs in remote areas remains poorly understood. Here, the spatial distribution, potential sources, and environmental risks of MPs were analyzed in the headstream of the Yellow River on the eastern Tibetan Plateau. The average MP abundances are (464.3 ± 200.9) items /m3 and (63.6 ± 34.7) items /kg in the water and sediment, respectively, with both majority polymer is polypropylene (PP) (water: 28.7 %; sediment: 25.2 %). The structural equation modeling and conditional fragmentation model were used in this study to analyze the source and impact factors of riverine MPs. According to the models, MPs were influenced by water quality parameters and anthropogenic activities. Furthermore, the source analysis through MP characteristics and statistical analysis showed that the main sources of MPs include domestic sewage, plastic waste disposal, and the use of agricultural plastic film. Moreover, the differences in MP sources along the river were distinguished by the conditional fragmentation model. The potential ecological risks of MPs were evaluated, resulting in relatively medium-to-low levels. Our findings will serve as important references for improving the understanding of the plateau environmental impacts of MP distribution in the headwaters of large rivers.

Distribution, flux, and risk assessment of microplastics at the Anzali Wetland, Iran, and its tributaries

Microplastic pollution has raised significant concerns among scientific communities and society in recent years due to its increase and lesser-known effects on the environment. To improve the knowledge of microplastic pollution in freshwater, we investigated microplastics in Anzali Wetland, a Ramsar site in northern Iran, as well as its nine main entering rivers. The extracted microplastics were characterized via visual identification, SEM-EDX, and μ-Raman methods. Microplastics (size range: 50-5000 μm) were found in all water and sediment samples with concentration of fibrous particles as well as polypropylene and polyethylene polymers. The mean concentration of microplastics in bottom sediment and surface water samples of the wetland was 301 ± 222 particles∙kg-1 d.w. and 235 ± 115 particles∙m-3 (0.23 particles∙L-1), respectively. The microplastic concentration in the central and eastern parts of the wetland was higher than in other areas; however, the mean concentrations revealed homogeneity across the wetland area. Water properties (dissolved oxygen, pH, temperature, electrical conductivity, and salinity in water) did not affect the concentration of microplastic particles, though correlational analysis revealed a strong positive association between microplastic quantity and turbidity. There was a significant positive relationship between microplastic concentration and the percentage of clay in sediment samples. The quantity of microplastics in river water was higher than in wetland water, but the difference between the results was not significant. However, the quantity of microplastics in the river's littoral sediment was higher than in the bottom sediment of the wetland where the difference between the results was significant. Microplastic ecological risk assessment showed high potential ecological risk. The findings underscore the importance of effective management strategies and the implementation of policies to mitigate the negative impact of MP pollution on ecosystems and human health.

Small microplastics have much higher mass concentrations than large microplastics at the surface of nine major European rivers

Understanding the fates and impacts of microplastics requires information on their sizes, polymer types, concentrations, and spatial and temporal distributions. Here, we focused on large (LMPs, 500 µm to 5 mm) and small (SMPs, 25 to 500 µm) microplastics sampled with the exact same protocol in nine of the major European rivers during the seven months of the Tara Microplastic Expedition. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and pyrolysis coupled with gas chromatography and mass spectrometry (Py-GC-MS) analyses were used to determine the microplastics contents by number and mass. The median LMP concentration was 6.7 particles m-3, which was lower than those in other regions of the world (America and Asia). The SMP mass concentration was much higher to the LMP concentrations, with SMP/LMP ratios up to 1000 in some rivers. We did not observe a systematic positive effect of urban areas for the two size classes or polymers; this could be explained by the fact that the transport of microplastic is highly heterogeneous in rivers. We believe that this study has important implications for predictive models of plastics distribution and fate in aquatic environments.

Seasonal dynamics, tidal influences, and anthropogenic impacts on microplastic distribution in the Yangtze River estuary: A comprehensive characterization and comparative analysis

Microplastics (MPs) are emerging contaminants with significant ecological and human health implications. This study examines the abundance, characteristics, and distribution of MPs in the Yangtze River estuary, focusing on seasonal variations, tidal cycles, and anthropogenic influences. Surface samples were collected using the Manta trawl method to ensure consistency with previous marine MP research. The study found an average MP concentration of 1.01 (± 0.65) n m-3, predominantly comprising low-density polymers such as polystyrene (38 %), polypropylene (33 %), and polyethylene (29 %). MPs were mainly fragments (34.9 %) and foam (30.7 %), with a prevalence of white particles. Seasonal analysis indicated significantly higher MP concentrations during flood seasons (1.32 ± 1.09 n m-3), nearly 1.9 times higher than during non-flood seasons (0.70 ± 0.28 n m-3). Tidal cycles also impacted MP distribution, with ebb tides showing increased concentrations (2.44 ± 1.30 n m-3) compared to flood tides (1.48 ± 2.07 n m-3). Furthermore, MP abundance showed a decreasing trend with increasing distance from urban centers, with significant correlations (0.52 < R2 < 0.65, P < 0.001). These findings underscore the necessity for seasonally adjusted monitoring and robust management strategies to combat MP pollution. The study advocates for the integration of diverse sampling methods and the consideration of environmental factors in future MP assessments, laying the groundwork for understanding the MP transport mechanism in the Yangtze River estuary and similar estuarine systems worldwide.

Significant regional disparities in riverine microplastics

Research on riverine microplastics has gradually increased, highlighting an area for further exploration: the lack of extensive, large-scale regional variations analysis due to methodological and spatiotemporal limitations. Herein, we constructed and applied a comprehensive framework for synthesizing and analyzing literature data on riverine microplastics to enable comparative research on the regional variations on a large scale. Research results showed that in 76 rivers primarily located in Asia, Europe, and North America, the microplastic abundance of surface water in Asian rivers was three times higher than that in Euro-America rivers, while sediment in Euro-American rivers was five times more microplastics than Asia rivers, indicating significant regional variations (p < 0.001). Additionally, based on the income levels of countries, rivers in lower-middle and upper-middle income countries had significantly (p < 0.001) higher abundance of microplastics in surface water compared to high-income countries, while the opposite was true for sediment. This phenomenon was preliminarily attributed to varying levels of urbanization across countries. Our proposed framework for synthesizing and analyzing microplastic literature data provides a holistic understanding of microplastic disparities in the environment, and can facilitate broader discussions on management and mitigation strategies.

Microplastics in multi-environmental compartments: Research advances, media, and global management scenarios

During the past decades, microplastics (MPs) have become an emerging concern due to their persistence and potential environmental threat. MP pollution has become so drastic that it has been found in the human food chain, breast milk, polar regions, and even the Himalayan basin, lake, etc. Inflammation, pulmonary hypertension, vascular occlusions, increased coagulability and blood cell cytotoxicity, disruption of immune function, neurotoxicity, and neurodegenerative diseases can all be brought on by severe microplastic exposure. Although many MPs studies have been performed on single environmental compartments, MPs in multi-environmental compartments have yet to be explored fully. This review aims to summarize the muti-environmental media, detection tools, and global management scenarios of MPs. The study revealed that MPs could significantly alter C flow through the soil-plant system, the structure and metabolic status of the microbial community, soil pH value, biomass of plant shoots and roots, chlorophyll, leaf C and N contents, and root N contents. This review reveals that MPs may negatively affect many C-dependent soil functions. Different methods have been developed to detect the MPs from these various environmental sources, including microscopic observation, density separation, Raman, and FT-IR analysis. Several articles have focused on MPs in individual environmental sources with a developed evaluation technique. This review revealed the extensive impacts of MPs on soil-plant systems, microbial communities, and soil functions, especially on water, suggesting possible disturbances to vital ecological processes. Furthermore, the broad range of detection methods explored emphasizes the significance of reliable analytical techniques in precisely evaluating levels of MP contamination in various environmental media. This paper critically discusses MPs' sources, occurrences, and global management scenarios in all possible environmental media and ecological health impacts. Future research opportunities and required sustainable strategies have also been suggested from Bangladesh and international perspectives based on challenges faced due to MP's pollution.

A QSAR prediction model for adsorption of organic contaminants on microplastics: Dubinin-Astakhov plus linear solvation energy relationships

Numerous pharmaceuticals and personal care products (PPCPs) co-exist with various types of microplastics (MPs) in the environment, making it extremely hard to experimentally measure all their adsorption interactions. Thus, a precise prediction model is on demand. In this study, we combined the commonly used Dubinin-Astakhov (DA) model and the linear solvation energy relationships (LSERs) model to predict the adsorption capacity (Q0) and adsorption affinity (E) of MPs for PPCPs, including the key parameters of MP (specific surface area, oxygen-containing functional groups), and the Kamlet-Taft solvation parameters of organic contaminants. The model was validated with the experimental data of 8 PPCPs and 8 MPs (i.e. pristine and aged PE, PET, PS, PVC) plus some published adsorption data. This new model also indicated that the adsorption of PPCPs on those MPs was primarily governed by hydrophobic interaction and hydrogen bonding. The developed model can predict the adsorption of PPCPs onto MPs with a high accuracy and can also provide insights into the understanding of interaction forces in the adsorption process.

Standardization of monitoring data reassesses spatial distribution of aquatic microplastics concentrations worldwide

Microplastics are found in continental and oceanic waters worldwide, but their spatial distribution shows an intricate pattern. Their driving factors remain difficult to identify and widely discussed due to insufficient and unstandardized monitoring data. Here, based on in situ experiments and hundreds of river samples from the Qinghai-Tibet Plateau, we formulate a model to standardize aquatic microplastic measurements. The model was applied to existing data on a global scale. These data are standardized to a 20 µm mesh size, resulting in a new spatial distribution of aquatic microplastic densities, with average concentrations of 554.93 ± 1352.42 items/m3 in Europe, 2558.90 ± 4799.62 in North America and 1741.94 ± 3225.09 in Asia. Excessive contaminations (microplastic concentration > 10⁴ items/m3) are in the Yangtze River, the Charleston Harbor Estuary, the Bodega Bay and the Winyah Bay. We show that, based on these standardized concentrations, new driving factors could be used to predict the global or regional microplastic distribution in continental waters, such as the Human Development Index with a correlation of 75.86% on a global scale, the nighttime lights with a correlation of 37.26 ± 0.30% in Europe and 39.02 ± 0.54% in Asia, and the Mismanagement Plastic Waste with a correlation of 61.21 ± 19.86% in North America. Mapping standardized concentrations of aquatic microplastics enables a better comparison of contamination levels between regions and reveals more accurate hotspots to better adapt remediation efforts and future plastic pollution scenarios.

Distribution and risk assessment of microplastic pollution in a rural river system near a wastewater treatment plant, hydro-dam, and river confluence

Rivers are the natural drainage system, transporting anthropogenic wastes and pollution, including microplastics (plastic < 5 mm). In a riverine system, microplastics can enter from different sources, and have spatial variance in concentration, physical and chemical properties, and imposed risk to the ecosystem. This pilot study presents an examination of microplastics in water and sediment samples using a single sample collection from the rural Raquette River, NY to evaluate a hypothesis that distinct locations of the river, such as downstream of a wastewater treatment plant, upstream of a hydro-dam, and river confluence, may be locations of higher microplastics concentration. In general, our results revealed the presence of high microplastic concentrations downstream of the wastewater treatment plant (in sediments), upstream of the hydro dam (both water and sediment), and in the river confluence (water sample), compared to other study sites. Moreover, the risk assessment indicates that even in a rural river with most of its drainage basin comprising forested and agricultural land, water, and sediment samples at all three locations are polluted with microplastics (pollution load index, PLI > 1; PLIzone = 1.87 and 1.68 for water and sediment samples respectively), with risk categories between Levels I and IV ("minor" to "danger"). Overall, the river stands in a "considerable" risk category (PRIzone = 134 and 113 for water and sediment samples respectively). The overall objective of this pilot study was to evaluate our hypothesis and advance our understanding of microplastic dynamics in rural river systems, elucidating their introduction from a point source (wastewater treatment plant), transit through an impediment (hydro-dam), and release into a vital transboundary river (confluence of Raquette-St. Lawrence Rivers).

Effects of lakeshore landcover types and environmental factors on microplastic distribution in lakes on the Inner Mongolia Plateau, China

Microplastic pollution in freshwater environments has received increasing attention. However, limited research on the occurrence and distribution of microplastics in plateau lakes. This study investigated the microplastic characteristics and influencing factors in lakes with different land cover types on the Inner Mongolia Plateau. Results showed that microplastic abundance ranged from 0.5 to 12.6 items/L in water and 50-325 items/kg in sediments. Microplastics in water were predominantly polypropylene (50.5%), fragments (40.5%), and 50-200 µm (66.7%). High-density (27.9%), fibrous (69.3%), and large-sized microplastics (47.7%) were retained primarily in lake sediments. The highest microplastic abundance in water was found in cropland lakes and grassland lakes, while that in sediments was in descending order of desert lakes > cropland lakes > grassland lakes > forest-grassland lakes. Differences among lake types suggest that agriculture, tourism, and atmospheric transport may be critical microplastic sources. Microplastic distribution was positively correlated with farmland and artificial surface coverage, showing that land cover types related to human activities could exacerbate microplastic pollution in lakes. Redundancy analysis showed that ammonia nitrogen and pH were the key physicochemical factors affecting microplastic distribution in lakes, indicating the potential sources of microplastics in lakes and the uniqueness of microplastic occurrence characteristics in desert saline-alkaline lakes, respectively.

Temporal and spatial variation of microplastics in the urban rivers of Harbin

This study was to investigate temporal and spatial variation of microplastics in surface water and sediment in the urban rivers of Harbin during dry and wet season. Water samples (n = 25) in Xinyi River (n = 13) and Ashe River (n = 12) were collected from the selected sampling points. Microplastics in urban rivers in Harbin included polyethylene (PE), polypropylene (PP), polystyrene (PS), polyamide (PA), polyvinyl chloride (PVC) and polyethylene terephthalate (PET). The results show that urban rivers in Harbin had relatively mild microplastic abundance with most fragments in shape and colorless in color. PP and PE were the major polymers in surface water samples, while PVC and PET were the major polymers in sediment, which were dominated by large-size and granulate shape microplastics. Source apportionment demonstrate that the main sources of microplastics in Xinyi River and Ashe River during dry season were domestic wastewater and effluent from rainfall, while the main sources of microplastics in Xinyi River and Ashe River during wet season were wastewater, atmospheric sedimentation, and agricultural source. The morphology of microplastics in surface water and sediment in urban rivers of Harbin was negatively correlated with water velocity and positively correlated with the concentration of suspended matter, dissolved oxygen, and conductivity. Riparian vegetation on the sides of Xinyi and Ashe River decreased migration process of microplastics by vegetal purification and then resulted in low abundance of microplastics. In conclusion, this study highlighted the occurrence characteristics, source apportionment and environmental influencing factors of microplastics in urban rivers of Harbin, which may develop new insights into the reduction of abundance of microplastics in the urban rivers.

The processes and transport fluxes of land-based macroplastics and microplastics entering the ocean via rivers

Approximately 80% of marine plastic waste originates from land-based sources and enters oceans through rivers. Hence, to create effective regulations, it is crucial to thoroughly examine the processes by which land-based plastic waste flows into marine environments. To this end, this review covers the complete journey of macro- and microplastics from their initial input into rivers to their ultimate release into oceans. Here, we also discuss the primary influencing factors and current popular research topics. Additionally, the principles, applicability, accuracy, uncertainty, and potential improvement of the standard methods used for flux estimation at each stage are outlined. Emission estimates of land-based macro- and microplastics are typically assessed using the emission factor approach, coefficient accounting approach, or material flow analysis. Accurately estimating mismanaged plastic waste is crucial for reducing uncertainty in the macroplastic emission inventory. In our review of the processes by which land-originating plastics enter rivers, we categorized them into two major types: point-source and diffuse-source pollution. Land surface hydrological models simulate transport from diffuse sources to rivers, necessitating further research. Riverine (micro)plastic flux to the ocean is often estimated using monitoring statistics and watershed hydrological models at the watershed scale; however, standardized monitoring methods have not yet been established. At the global scale, algorithms based on river datasets are often used, which require further improvements in river data selection and microplastic number-mass conversion factors. Furthermore, the article summarizes the accuracy and sources of uncertainty of various methods. Future research efforts should focus on quantifying and mitigating uncertainties in resultant projections. Overall, this review deepens our understanding of the processes by which land-based plastic waste enters the ocean and helps scholars efficiently select or improve relevant methods when studying land-ocean transport fluxes.

Occurrence of microplastic pollution in rivers globally: Driving factors of distribution and ecological risk assessment

Microplastics, as global emerging pollutants, have received significant attention worldwide due to their ubiquitous presence in the rivers. However, there is still a lack of clarity on the occurrence, driving factors, and ecological risks of microplastics in rivers worldwide. In this study, a global microplastic dataset based on 862 water samples and 445 sediment samples obtained from 63 articles was constructed, which revealed the temporal and spatial distribution of abundance and morphological characteristics of microplastics in rivers across the globe. In global rivers, the abundance of MPs in both water and sediment spans across 10 and 4 orders of magnitude, respectively. The MP comprehensive diversity index based on the physical morphological characteristics of MPs indicated a significant positive correlation between the pollution sources of MPs in different environmental media. Based on the data was aligned to the full-scale MPs, a novel framework was provided to evaluate the ecological risk of MPs and the interaction effects between the influencing factors driving the distribution characteristics of MPs in rivers around the world. The results obtained demonstrated a wide variation in the key driving factors affecting the distribution of microplastics in different environmental media (water and sediment) in rivers globally. The diversity indices of the morphological characteristics of MPs in densely populated areas of lower-middle income countries in Asia were significantly higher, implying that the sources of microplastics in these regions are more complex and extensive. More than half of the rivers are exposed to potential ecological risks of MPs; however, microplastics may pose only immediate risks to aquatic species in Burigang River, Bangladesh. This can provide valuable insights for formulating more effective scientific strategies for the management of MP pollution in rivers.

Sequestration and export of microplastics in urban river sediments

In rivers, riverbeds are considered to have dual properties as a short-term sink and a source of further mobilization for microplastics. To better understand the sources, storage, and fate of microplastics in river systems, this study quantified the formation of microplastic hotspots in riverbeds and seasonal variations in microplastic inventories in riverbeds, especially for small-sized microplastics (<330 µm), with a fluorescence-based protocol. This study provides first-hand measured evidence for the sequestration of microplastics in the riverbed under low-flow conditions and its export from the riverbed under high-flow conditions. The results show that riverbeds in urban areas are still hotspots for microplastic pollution and that high inputs of urban microplastics control microplastic load in its downstream areas. Seasonal rainfall exported 34.86 % (equivalent to 4.34 × 1011 items/8.57 t) of microplastic pollution from the riverbed, and its removal capacity may be related to the rainfall intensity. Wider riverbeds are conducive to the formation of microplastic hotspots due to the flow slow down. Most importantly, rainfall-driven scouring of the riverbed can enhance the pollution of small-sized microplastics in the riverbed, especially the smallest-size microplastics (<100 µm). Therefore, this study not only contributes reliable information about the sequestration and export of microplastics in the riverbed, but also provides a possible mechanism to explain the lack of small-sized microplastics (<330 µm) in the ocean.

In situ correlation between microplastic and suspended particulate matter concentrations in river-estuary systems support proxies for satellite-derived estimates of microplastic flux

Rivers are key pathways for transporting microplastics from land to the oceans, yet microplastic flux estimates remain uncertain. Remote sensing allows repeated broad-scale measurements and can be used to extrapolate limited in situ observations. This study investigated the relationship between suspended particulate matter (SPM), a satellite-observable water quality parameter, and microplastic concentration in a partially mixed estuary (Tamar, UK). Microplastic concentrations ranged from 0.04 to 0.99 microplastics/m3, decreasing downstream. A significant correlation was found between SPM and microplastic concentration over two seasons. This relationship was used to compute a multiyear timeseries of proxy microplastic concentration from satellite imagery and produce estimates of annual proxy microplastic flux. This approach could be applied to investigate microplastic flux in other major rivers worldwide where such a relationship between microplastics and SPM exists. To apply this workflow elsewhere, the establishment of local SPM-to-microplastic relationships from in situ observations and local validation of remote sensing SPM algorithms are essential.

Identification of the driving factors of microplastic load and morphology in estuaries for improving monitoring and management strategies: A global meta-analysis

Estuaries are one of the primary pathways for transferring microplastics (MPs) from the land to the ocean. A comprehensive understanding of the load, morphological characteristics, driving factors, and potential risks of MPs in estuaries is imperative to inform reliable management in this critical transboundary area. Extracted from 135 publications, a global meta-analysis comprising 1477 observations and 124 estuaries was conducted. MP abundance in estuaries was tremendously variable, reaching a mean of 21,342.43 ± 122,557.53 items/m3 in water and 1312.79 ± 6295.73 items/kg in sediment. Fibers and fragments take up a majority proportion in estuaries. Polyester, polypropylene, and polyethylene are the most detected MP types. Around 68.73% and 85.51% of MPs detected in water and sediment are smaller than 1 μm. The redundancy analysis revealed that the explanatory factors influencing the morphological characteristics of MPs differed between water and sediment. Regression analysis shows that MP abundance in water is significantly inversely correlated with mesh/filter size, per capita plastic waste, and the Human Development Index, whereas it is significantly positively correlated with population density and share of global mismanaged plastic waste. MP abundance in sediment significantly positively correlated with aridity index and probability of plastic entering the ocean, while significantly negatively correlated with mesh/filter size. Analysis based on Geodector identified that the extraction method, density of flotation fluid, and sampling depth are the top three explanatory factors for MP abundance in water, while the share of global mismanaged plastic waste, the probability of plastic being emitted into the ocean, and population density are the top three explanatory factors for MP abundance in sediment. In the studied estuaries, 46.75% of the water and 2.74% of the sediment are categorized into extremely high levels of pollution, while 73.08% of the water and 43.48% of the sediment belong to class V of the potential ecological index.

Numerical simulation research of the transportation and distribution characteristics on sea surface of the microplastic released continuously for 12 years from China's coastal cities

Based on the Lagrangian random walk particle tracking method and the global ocean reanalysis data, this study simulated the drift-diffusion process in ocean of microplastic particles (density less than seawater) discharged by coastal cities in China for 12 consecutive years. The results reveal that most of the microplastics (80.33%) essentially end up ashore or in the marginal seas around China, a small portion of microplastics (18.22%) enter the Sea of Japan and the Northwest Pacific Ocean via the Tsushima Strait and the Osumi-Kaikyo with the Kuroshio Tide, a very small portion of microplastics (1.45%) enter into the waters of Southeast Asian countries along with the west boundary current of South China Sea. The concentration distribution characteristics have obvious seasonal variation in the high concentration areas (the marginal seas around China and Sea of Japan). The mainly destination area of microplastics released in different cities is different.

Molecular-level insights into the heterogeneous variations and dynamic formation mechanism of leached dissolved organic matter during the photoaging of polystyrene microplastics

Microplastics (MPs) and their derivatives have received worldwide attention owing to their adverse effects on ecosystems. However, molecular diversity and dynamic formation of dissolved organic matter (DOM) during the photoaging of MPs remain unclear. Herein, we explored a molecular‒level formation mechanism for polystyrene MP (MPPS)‒derived DOM (PSDOM) during the photoaging of MPs to explain the evolution, heterogeneity, and sequential response of molecules to irradiation. Two‒dimensional correlation spectroscopy was applied to correlate the variations of PSDOM molecules detected by Fourier transform-ion cyclotron resonance mass spectrometry with those of MPPS functional groups detected by Fourier transform infrared spectroscopy. Irradiation‒induced PSDOM contained the most highly unsaturated structures with oxygen, but showed fewer aromatic structures than natural aquatic DOM. Photochemical transformations occurred between saturated‒reduced and oxidized molecules during PSDOM leaching, with the low‒oxidized and high‒oxidized molecules undergoing considerable changes in the normal carbon oxidation state and molecular number, respectively. The primary sequential response of PSDOM molecules to increasing irradiation time [low‒oxidized/high‒weight (450 Collapse

Key Words

• Dynamic formation
• Fluorescence properties
• Heterogeneous correlations
• Leaching responses
• Molecular parameters
• Unique molecules

Collapse

MESH Headings

• Microplastics
• Polystyrenes
• Plastics
• Dissolved Organic Matter
• Ecosystem
• Skin Aging

Collapse

Grants Collapse

Affiliation(s)

Fanhao Song State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Tingting Li State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China; School of Environment, Tsinghua University, Beijing 100084, China
Jin Hur Department of Environment and Energy, Sejong University, 209 Neungdong-ro, Gwangjin-gu, Seoul, 05006, South Korea
Quan Shi State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China
Fengchang Wu State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China.
Wei He Ministry of Education Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing 100083, China
Di Shi State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Chen He State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China
Lingfeng Zhou State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Mingqi Ruan State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
Yuhan Cao State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China; School of Energy and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China

Collapse

A multidimensional approach for microplastics monitoring in two major tropical river basins, Malaysia

Microplastics (MPs) with the size of 1 μm-5 mm are pollutants of great concern ubiquitously found in the environment. Existing efforts have found that most of the MPs present in the seas mainly originated from land via riverine inputs. Asian rivers are known to be among the top in microplastic emissions. However, field data are scarce, especially in Malaysia. This study presents the distribution and characteristics of MPs in the surface water of two major river basins of Malaysia, namely Langat River (West Coast/Straits of Malacca) and Kelantan River (East Coast/South China Sea). Water samples were collected at 21-22 locations in Kelantan and Langat rivers, covering the river, estuary and sea. MPs were physically classified based on sizes, shapes, colours and surface morphology (SEM-EDS). The average of 179.6 items/L and 1464.8 items/L of MPs had been quantified from Kelantan and Langat rivers, respectively. Fibre (91.90%) was highly recorded at Kelantan, compared to Langat whereby both fibre (59.21%) and fragment (38.87%) were prevalence. Anthropogenic activities and urbanised areas contribute to high microplastic abundance, especially in the Langat River. Micro-FTIR analysis identified 14 polymers in Kelantan River, whereas 20 polymers were found in Langat River. Polypropylene, polyethylene, polyethylene terephthalate, nylon, phenoxy resins, poly(methyl acrylate), poly(methyl methacrylate), polystyrene, polytetrafluoroethylene, polyurethane and rayon were discovered in both rivers, although only polyethylene was significant (>1 ppm) when further analysed using pyrolysis-GC/MS. Correlation analysis and multiple linear regression were used to explain the relationship between water quality and MP abundance, suggesting only turbidity was positively significant to the microplastic occurrence. This comprehensive study is first to suggest a full-scale monitoring protocol for MPs in Malaysian riverine system and is significant in understanding MPs abundance in correlation to in-situ environmental factors. Consequently, this will allow the right authorities to develop mitigation strategies to address riverine plastic pollution in major river basins in Malaysia and the South East Asia.

The effects of large roughness elements on the in-stream transport and retention of polystyrene microplastics

The mechanisms controlling transport and retention of microplastics (MPs) in riverine systems are not understood well. We investigated the impact of large roughness elements (LREs) on in-stream transport and retention of the ubiquitous polystyrene-microplastics (PS-MPs). Scaled experiments were conducted with and without LREs under various shear Reynolds numbers (Re*) in an ecohydraulics flume. Our results, for the first time, demonstrated a clear dependence of the MPs' velocity on Re* in LREs-dominated channel. Two distinct regimes and thresholds were identified: lower Re* (≤ 15,000) regime corresponding to higher velocities of MPs ([Formula: see text]> 0.45), and higher Re* (> 15,000) to lower [Formula: see text]< 0.45). The presence and higher density of LREs increased Re*, decreased [Formula: see text], and enhanced the PS-MPs capture. The LREs-generated turbulence kinetic energy (TKE) was found to be a good predictor of PS-MPs transport and retention rates, indicating the effectiveness of LREs in retaining PS-MPs in streams and rivers.

Experimental uncertainty assessment of meso- and microplastic concentrations in rivers based on net sampling

Meso- and microplastics have been collected via net sampling in marine and freshwater environments, but the effect of net clogging on evaluations of their concentrations (mPC) remains uncertain. We experimentally investigated the mPC uncertainties resulting from net clogging in the Ohori and Tone-unga Rivers, typical urban rivers in Japan, throughout 16 samplings with five filtration durations in one day. The weighted mean concentration in the Ohori River was significantly lower than that in the Tone-unga River, allowing us to examine the effect of clogging in rivers with different contamination levels. The variances in both rivers consistently tended to increase with increasing filtration duration, which can be expressed by applying the integral form of the Weibull reliability function (WRF). Furthermore, application of the WRF successfully revealed the optimal filtration durations in the Ohori and Tone-unga Rivers, which depended on the plastic abundance and sample volume. Since it could be difficult to obtain the plastic contamination level in advance, our suggestion is to predict the time sustained above 85 % filtration efficiency by applying a WRF-based model. In actuality, the sustained time in the Ohori (Tone-unga) River varied between 2.6 and 6.2 min (3.2 and 7.1 min) throughout the experiment, which permitted low mPC uncertainties of 12 % and 9.5 %, respectively. If notable uncertainty exists due to a low contamination level, a net with a high open area ratio should be used to increase the filtration duration. Hence, our results emphasize the importance of considering the open area ratio of nets used for sampling in studies. Our study provides insights into the occurrence of uncertainty due to net clogging to establish a standardized methodology for meso- and microplastic monitoring in aquatic environments via net sampling and consequently contributes to improving the sampling accuracy.

Microplastic occurrence and ecological risk assessment in the eight outlets of the Pearl River Estuary, a new insight into the riverine microplastic input to the northern South China Sea

Estuaries are unique transition zones connecting terrestrial and coastal environments and are recognized as primary conveyors for land-derived plastics to open oceans. Riverine microplastics (MPs) have been commonly investigated using sequential sampling which might not effectively reflect the actual load. In this study, sampling at eight outlets was performed during a complete tidal cycle to estimate the MP flux to the Pearl River Estuarine (PRE) using a concurrent sampling strategy. The MP abundances ranged from 2.90 ± 0.57-5.9 ± 2.27 particles/L. A remarkable difference between tides in MP abundances suggests tidal effect should not be overlooked in assessment. The MP load through the eight outlets was estimated at 304 trillion particles or 1102 tons into the PRE annually. Additionally, similar potential ecological risk assessment among eight rivers implied that environmental threats posed by less urbanized and populated rural areas on the western side have been under-evaluating for decades.

Effects of organic matter on the aggregation of anthropogenic microplastic particles in turbulent environments

Biofilm-coated microplastics are omnipresent in aquatic environments, carrying different organic matter (OM) that in turn influences the flocculation and settling of microplastic aggregates. In this study, the effects of chitosan, guar gum, humic acid, and xanthan gum on the flocculation of anthropogenic microplastics are examined under controlled shear through the mixing chamber experiments. The results show that all of the selected OMs have positive effects on biofilm culturing and thus enhance the growth of microplastic flocs, with more evident promoting effects for cationic and neutral OMs (i.e., chitosan and guar gum) than anionic OMs (i.e., humic acid and xanthan). No critical shear rate is observed in the size vs. shear relationship based on our measurements. In addition, the quadrature-based two-class population balance model is employed to track the development of bimodal floc size distributions (FSDs) composed of small and large microplastic flocs. The model predictions show reasonable agreement with the observed FSDs. The largest error of settling flux from the two-class model is 7.8% in contrast with the reference value measured by the camera-based FSDs with 30 bins. This study highlights the role of different OMs on microplastic flocculation and indicates that a two-class model may be sufficient to describe microplastic transport processes in estuaries.

Distribution and sources of microplastics in the Beibu Gulf using in-situ filtration technique

The Beibu Gulf is a vital link between China and the ASEAN nations, and microplastic contamination is rising due to fast growth, coastal life, fisheries, and mariculture. The abundance, distribution, and source analyses were conducted at 25 sample points for this study. According to this study, the average MPs was 0.25 ± 0.05 items/m³, ranging from 0.01 items/m³ to 0.89 items/m³. Fibers, white, cellulose, and 0.33-1 mm were abundant in shape, color, composition, and size, respectively. Multi-statistics-based source analysis indicated land-based inputs (packing materials, textile materials, fisheries, and mariculture) were dominant in the Beibu Gulf. In this study, we also acknowledged a comprehensive comparison and convenience between plankton pumps and other conventional designs to collect microplastic samples from water. We suggested that using a uniform design could elevate the data quality of microplastics.

Occurrence of microplastics pollution in the Yangtze River: Distinct characteristics of spatial distribution and basin-wide ecological risk assessment

The widespread presence of microplastics (MPs) in the Yangtze River, the third longest river in the world, has drawn increasing attention. Although numerous studies have been conducted recently to investigate and analyze the MPs exposure to the surface water of the river, most merely focus on a certain part of the Yangtze River, and knowledge of MPs based on the basin-wide is still scattered. This article reveals the spatial distribution characteristics of MPs in the Yangtze River from the whole watershed scale. Among the five areas in the basin, the upstream and the midstream were demonstrated to contain more MPs (3598.6 particles/m³ and 3226.8 particles/m³). The obtained results suggested the MP presented in the entire watersheds was uneven and the 'hotspots' occurred, where the MPs concentrations were relatively higher than the surrounding. The discharging of the wastewater treatment plants along the river, the locations of dams, and the stability and fragment of MPs, were demonstrated to be the important driving factors in the spatial distribution of MPs and leading to the appearance of the MP 'hotspots' in the Yangtze River, but were previously overlooked. It is the first study to evaluate the ecological risk of MPs exposure to the surface water of the Yangtze River with multiple assessment methods, taking not only abundance but also morphological characteristics, polymer composition and toxic effect into account. More importantly, based on the multiple individual MPs risk assessment methods, we developed the BetaMP method which achieves a comprehensive assessment of MP risk in basin-wide by taking multiple MP characteristics into account for the first time. This is conducive to better understanding the environmental impacts of MPs pollution in the different regions of the river.

Characteristics of (micro)plastic transport in the upper reaches of the Yangtze River

Many studies focus on the transport of plastic from rivers to oceans while little attention was paid to the plastic transport in the upper reaches of rivers. Transport process of plastic from upstream to downstream in the whole river basin scale is still poorly understood. In this work, five sections in the upper reaches of the Yangtze River were investigated to characterize the features of plastic transport. Plastic abundance and flux were 293 to 156,667 n/m³ and 1.2 to 34,711 g/s, respectively. Plastic flux peaked at or right after the first flood peak in most sections, but plastic abundance was the highest in the normal or low water period. The first flood peak caused a temporary rise of plastic flux that last a short duration. Transport of plastic was not limited to water surface, and the Three Gorges Dam showed a peak elimination effect on plastic transport. Annual discharge of plastic was 1392 to 9532 tons and 6.2 × 10¹⁴ to 175 × 10¹⁴ particles at different sections. An increasing trend was observed for both plastic mass and quantity going downstream. Results showed that river plastic flux is highly variable and influenced by the dam, which should be considered in future to develop better monitoring strategies and to further improve the model.

What can we learn from studying plastic debris in the Sea Scheldt estuary?

The Sea Scheldt estuary has been suggested to be a significant pathway for transfer of plastic debris to the North Sea. We have studied 12,801 plastic items that were collected in the Sea Scheldt estuary (Belgium) during 3 sampling campaigns (in spring, summer, and autumn) using a technique called anchor netting. The investigation results indicated that the abundance of plastic debris in the Scheldt River was on average 1.6 × 10^-3 items per m³ with an average weight of 0.38 × 10^-3 g per m³. Foils were the most abundant form, accounting for >88 % of the samples, followed by fragments for 11 % of the samples and filaments, making up for <1 % of the plastic debris. FTIR spectroscopy of 7 % of the total number of plastic debris items collected in the Sea Scheldt estuary (n = 883) revealed that polypropylene (PP), polyethylene (PE), and polystyrene (PS) originating from disposable packaging materials were the most abundant types of polymers. A limited number of plastic debris items (n = 100) were selected for non-destructive screening of their mineral element composition using micro-X-ray fluorescence spectrometry (μXRF). The corresponding results revealed that S, Ca, Si, P, Al, and Fe were the predominant mineral elements. These elements originate from flame retardants, mineral fillers, and commonly used catalysts for plastic production. Finally, machine learning algorithms were deployed to test a new concept for forensic identification of the different plastic entities based on the most important elements present using a limited subset of PP (n = 36) and PE (n = 35) plastic entities.

One is not enough: Monitoring microplastic ingestion by fish needs a multispecies approach

The development of monitoring programs based on bioindicators is crucial for assessing the impact of microplastic ingestion on marine organisms. This study presents results from an Italian pilot action aimed at investigating the suitability of a monitoring strategy based on a multispecies approach. The benthic-feeder Mullus barbatus, the demersal species Merluccius merluccius, and the pelagic-feeder species of the genus Scomber were used to assess the environmental contamination by microplastics in three different marine areas, namely Ancona (Adriatic Sea), Anzio (Tyrrhenian Sea), and Oristano (Western Sardinia). Microplastic ingestion frequencies were higher in samples from Anzio (26.7 %) and Ancona (25.0 %) than Oristano (14.4 %), suggesting a relationship between microplastic bioavailability and the proximity to urban settlements and river flows. Furthermore, microplastic ingestion was affected by the feeding habits of the examined species. The detected differences reinforce the hypothesis that a multispecies approach is needed to evaluate microplastic ingestion by marine animals.

Microplastics in urban runoff: Global occurrence and fate

Public concerns on microplastic (MP) pollution and its prevalence in urban runoff have grown exponentially. Huge amounts of MPs are transported from urban environments via surface runoff to different environment compartments, including rivers, lakes, reservoirs, estuaries, and oceans. The global concentrations of MPs in urban runoff range from 0 to 8580 particles/L. Understanding the sources, abundance, composition and characteristics of MPs in urban runoff on a global scale is a critical challenge because of the existence of multiple sources and spatiotemporal heterogeneity. Additionally, dynamic processes in the mobilization, aging, fragmentation, transport, and retention of MPs in urban runoff have been largely overlooked. Furthermore, the MP flux through urban runoff into rivers, lakes and even oceans is largely unknown, which is very important for better understanding the fate and transport of MPs in urban environments. Here, we provide a critical review of the global occurrence, transport, retention process, and sinks of MPs in urban runoff. Relevant policies, regulations and measures are put forward. Future global investigations and mitigation efforts will require us to address this issue cautiously, cooperating globally, nationally and regionally, and acting locally.

Microplastic Variations in Land-Based Sources of Coastal Water Affected by Tropical Typhoon Events in Zhanjiang Bay, China

Increasingly serious microplastic pollution in coastal areas and the ecological threats associated with plastics have attracted global attention. The frequency and intensity of typhoons have increased owing to global warming, strongly influencing the distribution and composition of microplastics in coastal ecosystems. In this study, the abundance, composition, diversity, and flux of microplastics in three estuaries and one sewage outlet in Zhanjiang Bay (ZJB) were analyzed. The average abundance of microplastics from land-based sources increased 3.6-fold from 14.19 ± 3.60 items/L before Typhoon Kompasu to 51.19 ± 28.53 items/L after the typhoon (p < 0.05). In addition, the proportion of fiber and large microplastics increased after the typhoon. In all samples, microplastics 100–330 μm in size were predominant, and blue was the most abundant color. The diversity in the color and size of microplastics increased after Typhoon Kompasu. The total daily flux of microplastics at the four stations entering ZJB was 3.95 × 1011 items before the typhoon and 9.93 × 1011 items after the typhoon, showing a 2.5-fold increase. This study demonstrated the influence of Typhoon Kompasu on microplastics from land-based sources of ZJB coastal waters and provided vital data for further study on MP pollution in coastal water ecosystems and the impact of typhoons on microplastics.