Home is Where the Pipeline Ends: Characterization of Volatile Organic Compounds Present in Natural Gas at the Point of the Residential End User

Lung cell toxicological effects of 3D printer aerosolized filament byproducts

As 3D printing has become more compact and affordable, the use of the technology has become more prevalent across household, classroom, and small business settings. The emissions of fused filament fabrication (FFF) 3D printers consist of volatile organic compounds (VOCs) and aerosolized particulate matter (PM) dependent upon the filament in use. This study investigates the hazards posed by these emissions through aerosol characterization and cell exposure. Seventeen filaments were obtained from five manufacturers, consisting of fourteen plastic filaments (polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), or polycarbonate (PC) polymers) and three filaments with metal filler (copper, bronze, and steel). For 1-h trials, BEAS-2B human bronchial epithelial cells were directly exposed to aerosolized 3D printer emissions at the air-liquid interface (ALI). Particle characterization showed ABS filaments produced more PM and VOC emissions with particles in the ultrafine size range. ABS filaments also elicited a greater biological response, with significant shifts in mitochondrial activity compared to the PLA filaments. Significant changes in amounts of glutathione (GSH) were observed after ABS and PLA emission exposure. Exposure to emissions from the steel filament resulted in the lowest average amount of glutathione, though insignificant, and a significantly lower mitochondrial activity, revealing a unique cause for concern among filaments tested. 3D printer emissions and subsequent cell responses appear filament-dependent, and users should mitigate personal exposure to aerosols.

Thermal Desorption Hyphenated to Comprehensive Two-Dimensional Gas Chromatography-Time-of-Flight Mass Spectrometry for Trace Analysis in Raw Renewable Gases-Application to Hydrothermal Gasification

In the context of the energy transition, European countries pursue the common goal of increasing the share of renewable gases (from anaerobic digestion, pyrogasification, and hydrothermal gasification for instance) in the gas mix. Although produced gases are mainly composed of methane after upgrading, impurities of various natures and quantities may also be present in the produced raw gases and still after upgrading, including volatile organic compounds (VOCs) at trace levels that may have an impact on different stages of the gas chain even at low concentrations. These new renewable and/or low-carbon gases imply the need to develop new analytical tools to deeply characterize them, and thus fully manage their integration into the gas value chain. In this study focused on VOC analysis, a sampling approach using pre-concentration on an adsorbent phase was developed for gas sampling to ensure rapid collection, requiring only a small volume (≈ 100 mL). Traces were then analyzed by thermal desorption hyphenated to a comprehensive two-dimensional gas chromatography time-of-flight mass spectrometer. After identifying the compounds, a semi-quantification method was developed to provide an estimation of the concentration of VOCs for each chemical family. The method was first developed on a biomethane sample before being successfully applied to a raw gas produced by hydrothermal gasification, in which around 250 compounds were detected at a trace level (total concentration equivalent at 200 µg/L).

Readiness for a clean energy future: Prevalence, perceptions, and barriers to adoption of electric stoves and solar panels in New York City

Adoption of electric stoves and rooftop solar can reduce fossil-fuel reliance and improve health by decreasing indoor air pollution and alleviating energy insecurity. This study assessed prevalence and perceptions of these clean-energy technologies to increase adoption in New York City (NYC). A representative survey of 1,950 NYC adults was conducted from February 28 to April 1, 2022. Fourteen percent of people had an electric stove; 86% had gas stoves. Black, Latino/a, and lower-income residents were more likely to have electric stoves than White and higher-income residents. Only 14% of residents were interested in switching from gas to electric stoves. Of the 71% with gas stoves uninterested in switching, nearly half (45%) preferred gas cooking, particularly among White and higher-income residents, indicating a large opportunity to shift preferences. About 5% used solar for their home or building; another 77% were interested in solar. Of the 18% uninterested in solar, reasons included lack of agency, confusion about operation, and costs. Education about health and cost benefits, induction technology, how to transition, available subsidies, and other efforts to reduce adoption barriers can support clean technology uptake. Residential clean energy metrics should be tracked regularly to ensure that technology adoption proceeds equitably.

Long-term contributions of VOC sources and their link to ozone pollution in Bronx, New York City

Changes in energy and environmental policies along with changes in the energy markets of New York State over the past two decades, have spurred interest in evaluating their impacts on emissions from various energy generation sectors. This study focused on quantifying these effects on VOC (volatile organic compounds) emissions and their subsequent impacts on air quality within the New York City (NYC) metropolitan area. NYC is an EPA nonattainment region for ozone (O3) and likely is a VOC limited region. NYC has a complex coastal topography and meteorology with low-level jets and sea/bay/land breeze circulation associated with heat waves, leading to summertime O3 exceedances and formation of secondary organic aerosol (SOA). To date, no comprehensive source apportionment studies have been done to understand the contributions of local and long-range sources of VOCs in this area. This study applied an improved Positive Matrix Factorization (PMF) methodology designed to incorporate atmospheric dispersion and photochemical reaction losses of VOCs to provide improved apportionment results. Hourly measurements of VOCs were obtained from a Photochemical Assessment Monitoring Station located at an urban site in the Bronx from 2000 to 2021. The study further explores the role of VOC sources in O3 and SOA formation and leverages advanced machine learning tools, XGBoost and SHAP algorithms, to identify synergistic interactions between sources and provided VOC source impacts on ambient O3 concentrations. Isoprene demonstrated a substantial influence in the source contribution of the biogenic factor, emphasizing its role in O3 formation. Notable contributions from anthropogenic emissions, such as fuel evaporation and various industrial processes, along with significant traffic-related sources that likely contribute to SOA formation, underscore the combined impact of natural and human-made sources on O3 pollution. Findings of this study can assist regulatory agencies in developing appropriate policy and management initiatives to control O3 pollution in NYC.

Data-driven, explainable machine learning model for predicting volatile organic compounds' standard vaporization enthalpy

The accurate prediction of standard vaporization enthalpy (ΔvapHm°) for volatile organic compounds (VOCs) is of paramount importance in environmental chemistry, industrial applications and regulatory compliance. To overcome traditional experimental methods for predicting ΔvapHm° of VOCs, machine learning (ML) models enable a high-throughput, cost-effective property estimation. But despite a rising momentum, existing ML algorithms still present limitations in prediction accuracy and broad chemical applications. In this work, we present a data driven, explainable supervised ML model to predict ΔvapHm° of VOCs. The model was built on an established experimental database of 2410 unique molecules and 223 VOCs categorized by chemical groups. Using supervised ML regression algorithms, the Random Forest successfully predicted VOCs' ΔvapHm° with a mean absolute error of 3.02 kJ mol-1 and a 95% test score. The model was successfully validated through the prediction of ΔvapHm° for a known database of VOCs and through molecular group hold-out tests. Through chemical feature importance analysis, this explainable model revealed that VOC polarizability, connectivity indexes and electrotopological state are key for the model's prediction accuracy. We thus present a replicable and explainable model, which can be further expanded towards the prediction of other thermodynamic properties of VOCs.

A comprehensive review and perspective research in technology integration for the treatment of gaseous volatile organic compounds

Volatile organic compounds (VOCs) are harmful pollutants emitted from industrial processes. They pose a risk to human health and ecosystems, even at low concentrations. Controlling VOCs is crucial for good air quality. This review aims to provide a comprehensive understanding of the various methods used for controlling VOC abatement. The advancement of mono-functional treatment techniques, including recovery such as absorption, adsorption, condensation, and membrane separation, and destruction-based methods such as natural degradation methods, advanced oxidation processes, and reduction methods were discussed. Among these methods, advanced oxidation processes are considered the most effective for removing toxic VOCs, despite some drawbacks such as costly chemicals, rigorous reaction conditions, and the formation of secondary chemicals. Standalone technologies are generally not sufficient and do not perform satisfactorily for the removal of hazardous air pollutants due to the generation of innocuous end products. However, every integration technique complements superiority and overcomes the challenges of standalone technologies. For instance, by using catalytic oxidation, catalytic ozonation, non-thermal plasma, and photocatalysis pretreatments, the amount of bioaerosols released from the bioreactor can be significantly reduced, leading to effective conversion rates for non-polar compounds, and opening new perspectives towards promising techniques with countless benefits. Interestingly, the three-stage processes have shown efficient decomposition performance for polar VOCs, excellent recoverability for nonpolar VOCs, and promising potential applications in atmospheric purification. Furthermore, the review also reports on the evolution of mathematical and artificial neural network modeling for VOC removal performance. The article critically analyzes the synergistic effects and advantages of integration. The authors hope that this article will be helpful in deciding on the appropriate strategy for controlling interested VOCs.

Bibliometric analysis of research hotspots and trends in the field of volatile organic compound (VOC) emission accounting

Volatile organic compounds (VOCs) have been extensively studied because of their significant roles as precursors of atmospheric ozone and secondary organic aerosol pollution. The research aims to comprehend the current advancements in domestic and international VOC emission accounting. The study utilized the CiteSpace software to represent the pertinent material from Web of Science visually. The hot spots and future development trends of VOC emission calculation are analyzed from the perspectives of thesis subject words, cooperative relationships, co-citation relationships, journals, and core papers. According to the statistics, the approaches most often employed in VOC accounting between 2013 and 2023 are source analysis and emission factor method. Atmospheric environment is the journal with the most publications in the area. The Chinese Academy of Sciences and the University of Colorado System are prominent institutions in VOC emission accounting research, both domestically and internationally. The primary research focuses on the realm of VOC emission accounting clusters, which are "emission factor," "source analysis," "model," "air quality," and "health." A current trend in VOC emission accounting involves the construction of a VOC emission inventory using a novel model that combines emission factors and source analysis. This study reviews the progress made in calculating volatile organic compound (VOC) emissions over the past decade. It aims to provide researchers with a new perspective to promote the development of this field.

Clearing the Air: Gas Stove Emissions and Direct Health Effects

Gas range use has direct health effects-beyond those from climate change related to fossil fuels. If kitchens are not well ventilated, benzene, nitrogen dioxide, and other VOCs may reach levels known to harm health.

Serum HDL partially mediates the association between exposure to volatile organic compounds and kidney stones: A nationally representative cross-sectional study from NHANES

Environmental exposure to volatile organic compounds (VOCs) is ubiquitous, and this study explored whether exposure to VOCs is associated with the risk of kidney stones. We performed a nationally representative US cross-sectional study using data from five survey cycles (2011-2020) of the National Health and Nutrition Examination Survey (NHANES) program. Exposure to VOCs was determined by urine creatinine-corrected metabolites of VOCs (mVOCs). In total 5505 participants and 15 urine mVOCs were included for analysis, and the prevalence of kidney stones was 9.57 % (527/5505). Multivariable logistic regression showed that urine AMCC (parent VOCs (pVOCs): N, N-Dimethylformamide), 3,4-MHA (pVOCs: xylene), MA (pVOCs: ethylbenzene; styrene), DHBMA (pVOCs: 1,3-butadiene), HMPMA (pVOCs: crotonaldehyde) and 2HPMA (pVOCs: propylene oxide) were significantly associated with an increased risk of kidney stones in US general population. Sub-analysis revealed that there was a more pronounced association in women and the overweight/obesity group (body mass index ≥ 25). Moreover, the weighted quantile sum (WQS) regression model and the Bayesian kernel machine regression (BKMR) model consistently identified a positive association between co-exposure to VOCs and the risk of kidney stones, in which AMCC played the most important role among the 15 mVOCs. Mediation analysis further identified serum high-density lipoprotein cholesterol (HDL) as a mediator of the association between VOC co-exposure and kidney stones. Our study draws attention to the previously unknown positive associations between non-occupational VOC exposure and the risk of kidney stones in the general population. However, further studies are required to clarify the existence of such causation.

Natural gas odorants: A scoping review of health effects

PURPOSE OF REVIEW

Organosulfur compounds are intentionally added to natural gas as malodorants with the intent of short-term nasal inhalation to aid in leak detection. Regulatory exposure limits have not been established for all commonly used natural gas odorants, and recent community-level exposure events and growing evidence of indoor natural gas leakage have raised concerns associated with natural gas odorant exposures. We conducted a scoping review of peer-reviewed scientific publications on human exposures and animal toxicological studies of natural gas odorants to assess toxicological profiles, exposure potential, health effects and regulatory guidelines associated with commonly used natural gas odorants.

RECENT FINDINGS

We identified only 22 studies which met inclusion criteria for full review. Overall, there is limited evidence of both transient nonspecific health symptoms and clinically diagnosed causative neurotoxic effects associated with prolonged odorant exposures. Across seven community-level exposure events and two occupational case reports, consistent symptom patterns included: headache, ocular irritation, nose and throat irritation, respiratory complaints such as shortness of breath and asthma attacks, and skin irritation and rash. Of these, respiratory inflammation and asthma exacerbations are the most debilitating, whereas the high prevalence of ocular and dermatologic symptoms suggest a non-inhalation route of exposure. The limited evidence available raises the possibility that organosulfur odorants may pose health risks at exposures much lower than presently understood, though additional dose-response studies are needed to disentangle specific toxicologic effects from nonspecific responses to noxious organosulfur odors. Numerous recommendations are provided including more transparent and prescriptive natural gas odorant use practices.

Portable chemical detection platform for on-site monitoring of odorant levels in natural gas

The adequate odorization of natural gas is critical to identify gas leaks and to reduce accidents. To ensure odorization, natural gas utility companies collect samples to be processed at core facilities or a trained human technician smells a diluted natural gas sample. In this work, we report a detection platform that addresses the lack of mobile solutions capable of providing quantitative analysis of mercaptans, a class of compounds used to odorize natural gas. Detailed description of the platform hardware and software components is provided. Designed to be portable, the platform hardware facilitates extraction of mercaptans from natural gas, separation of individual mercaptan species, and quantification of odorant concentration, with results reported at point-of-sampling. The software was developed to accommodate skilled users as well as minimally trained operators. Detection and quantification of six commonly used mercaptan compounds (ethyl mercaptan, dimethyl sulfide, n-propylmercaptan, isopropyl mercaptan, tert‑butyl mercaptan, and tetrahydrothiophene) at typical odorizing concentrations of 0.1-5 ppm was performed using the device. We demonstrate the potential of this technology to ensure natural gas odorizing concentrations throughout distribution systems.

Climate and health benefits of a transition from gas to electric cooking

Household electrification is thought to be an important part of a carbon-neutral future and could also have additional benefits to adopting households such as improved air quality. However, the effectiveness of specific electrification policies in reducing total emissions and boosting household livelihoods remains a crucial open question in both developed and developing countries. We investigated a transition of more than 750,000 households from gas to electric cookstoves-one of the most popular residential electrification strategies-in Ecuador following a program that promoted induction stoves and assessed its impacts on electricity consumption, greenhouse gas emissions, and health. We estimate that the program resulted in a 5% increase in total residential electricity consumption between 2015 and 2021. By offsetting a commensurate amount of cooking gas combustion, we find that the program likely reduced national greenhouse gas emissions, thanks in part to the country's electricity grid being 80% hydropower in later parts of the time period. Increased induction stove uptake was also associated with declines in all-cause and respiratory-related hospitalizations nationwide. These findings suggest that, when the electricity grid is largely powered by renewables, gas-to-induction cooking transitions represent a promising way of amplifying the health and climate cobenefits of net-carbon-zero policies.

Gas and Propane Combustion from Stoves Emits Benzene and Increases Indoor Air Pollution

Exposure pathways to the carcinogen benzene are well-established from tobacco smoke, oil and gas development, refining, gasoline pumping, and gasoline and diesel combustion. Combustion has also been linked to the formation of nitrogen dioxide, carbon monoxide, and formaldehyde indoors from gas stoves. To our knowledge, however, no research has quantified the formation of benzene indoors from gas combustion by stoves. Across 87 homes in California and Colorado, natural gas and propane combustion emitted detectable and repeatable levels of benzene that in some homes raised indoor benzene concentrations above well-established health benchmarks. Mean benzene emissions from gas and propane burners on high and ovens set to 350 °F ranged from 2.8 to 6.5 μg min^-1, 10 to 25 times higher than emissions from electric coil and radiant alternatives; neither induction stoves nor the food being cooked emitted detectable benzene. Benzene produced by gas and propane stoves also migrated throughout homes, in some cases elevating bedroom benzene concentrations above chronic health benchmarks for hours after the stove was turned off. Combustion of gas and propane from stoves may be a substantial benzene exposure pathway and can reduce indoor air quality.

It's electric! An environmental equity perspective on the lifecycle of our energy sources

Energy policy decisions are driven primarily by economic and reliability considerations, with limited consideration given to public health, environmental justice, and climate change. Moreover, epidemiologic studies relevant for public policy typically focus on immediate public health implications of activities related to energy procurement and generation, considering less so health equity or the longer-term health consequences of climate change attributable to an energy source. A more integrated, collective consideration of these three domains can provide more robust guidance to policymakers, communities, and individuals. Here, we illustrate how these domains can be evaluated with respect to natural gas as an energy source. Our process began with a detailed overview of all relevant steps in the process of extracting, producing, and consuming natural gas. We synthesized existing epidemiologic and complementary evidence of how these processes impact public health, environmental justice, and climate change. We conclude that, in certain domains, natural gas looks beneficial (e.g., economically for some), but when considered more expansively, through the life cycle of natural gas and joint lenses of public health, environmental justice, and climate change, natural gas is rendered an undesirable energy source in the United States. A holistic climate health equity framework can inform how we value and deploy different energy sources in the service of public health.

Environmental and human health impacts of volatile organic compounds: A perspective review

Volatile organic compounds (VOCs) are synthetic chemicals that are broadly used in the production of numerous day-to-day products for residential and commercial-based applications. VOCs are naturally occurring in the environment; however, average annual emissions of man-made volatile organic compounds may have increased dramatically in recent decades. Although many factors were attributed to influencing volatile compounds' emission, only mankind's activities are mainly proclaimed. Since vehicle and industrial pollution are mounting for years and years, urban areas are highly prone to the impacts of VOCs. Generally, volatile compounds are highly spontaneous and readily react with the particles of ambiance and produce a polluted atmosphere through several physical and chemical reactions. Though the volatile compounds play an indispensable role in the manufacture and maintaining the stability of many products, the health impacts associated with their prolonged exposure are gaining attention as recent research reports underline the influence of a wide range of diseases and disorders. Likewise, since the modern way of life applies a lot of day-to-day chemicals, it is imperative to spread a wide knowledge and safety aspects about these chemicals so that people of a wide category can implement preventive measures according to their exposure and living style. In this context, the review article attempts to shed light on past and current updates concerning the relationship between VOCs exposure and environmental and human health impacts.

Composition, Emissions, and Air Quality Impacts of Hazardous Air Pollutants in Unburned Natural Gas from Residential Stoves in California

The presence of hazardous air pollutants (HAPs) entrained in end-use natural gas (NG) is an understudied source of human health risks. We performed trace gas analyses on 185 unburned NG samples collected from 159 unique residential NG stoves across seven geographic regions in California. Our analyses commonly detected 12 HAPs with significant variability across region and gas utility. Mean regional benzene, toluene, ethylbenzene, and total xylenes (BTEX) concentrations in end-use NG ranged from 1.6-25 ppmv─benzene alone was detected in 99% of samples, and mean concentrations ranged from 0.7-12 ppmv (max: 66 ppmv). By applying previously reported NG and methane emission rates throughout California's transmission, storage, and distribution systems, we estimated statewide benzene emissions of 4,200 (95% CI: 1,800-9,700) kg yr-1 that are currently not included in any statewide inventories─equal to the annual benzene emissions from nearly 60,000 light-duty gasoline vehicles. Additionally, we found that NG leakage from stoves and ovens while not in use can result in indoor benzene concentrations that can exceed the California Office of Environmental Health Hazard Assessment 8-h Reference Exposure Level of 0.94 ppbv─benzene concentrations comparable to environmental tobacco smoke. This study supports the need to further improve our understanding of leaked downstream NG as a source of health risk.