Community sewage sensors for monitoring public health

Wastewater based epidemiology as a surveillance tool during the current COVID-19 pandemic on a college campus (East Carolina University) and its accuracy in predicting SARS-CoV-2 outbreaks in dormitories

The COVID-19 outbreak led governmental officials to close many businesses and schools, including colleges and universities. Thus, the ability to resume normal campus operation required adoption of safety measures to monitor and respond to COVID-19. The objective of this study was to determine the efficacy of wastewater-based epidemiology as a surveillance method in monitoring COVID-19 on a college campus. The use of wastewater monitoring as part of a surveillance program to control COVID-19 outbreaks at East Carolina University was evaluated. During the Spring and Fall 2021 semesters, wastewater samples (N = 830) were collected every Monday, Wednesday, and Friday from the sewer pipes exiting the dormitories on campus. Samples were analyzed for SARS-CoV-2 and viral quantification was determined using qRT-PCR. During the Spring 2021 semester, there was a significant difference in SARS-CoV-2 virus copies in wastewater when comparing dorms with the highest number student cases of COVID-19 and those with the lowest number of student cases, (p = 0.002). Additionally, during the Fall 2021 semester it was observed that when weekly virus concentrations exceeded 20 copies per ml, there were new confirmed COVID-19 cases 85% of the time during the following week. Increases in wastewater viral concentration spurred COVID-19 swab testing for students residing in dormitories, aiding university officials in effectively applying COVID testing policies. This study showed wastewater-based epidemiology can be a cost-effective surveillance tool to guide other surveilling methods (e.g., contact tracing, nasal/salvia testing, etc.) to identify and isolate afflicted individuals to reduce the spread of pathogens and potential outbreaks within a community.

Portable biosensor combining CRISPR/Cas12a and loop-mediated isothermal amplification for antibiotic resistance gene ermB in wastewater

Wastewater is among the main sources of antibiotic resistance genes (ARGs) in the environment, but effective methods to quickly assess ARGs on-site in wastewater are lacking. Here, using the typical ARG ermB as the target, we report a portable biosensor combining CRISPR/Cas12a and loop-mediated isothermal amplification (LAMP) for the detection of ARGs. Six primers of LAMP and the crRNA of CRISPR/Cas12a were first designed to be preamplification with LAMP and lead Cas12a to recognize the ermB via base pairing. Due to the trans-cleavage activity of CRISPR/Cas12a after amplicon recognition, ssDNA probes modified with reporter molecules were used to implement a visual assay with lateral flow test strips and fluorescence. After a simple nucleic acid extraction with magnetic beads, the constructed biosensor possesses excellent sensitivity and selectivity as low as 2.75 × 103 copies/μL using fluorescence and later flow strips in wastewater. We further evaluated the community-wide prevalence of ermB in wastewater influent and found high mass loads of ermB during different months. This user-friendly and low-cost biosensor is applicable for rapid on-site ARG detection, providing a potential point-of-use method for rapid assessments of ARG abundance in wastewater from large city areas with many wastewater treatment plants and in resource-limited rural areas.

Wastewater-based epidemiology: a new frontier for tracking environmental persistence and community transmission of COVID-19

Recent research in many parts of the world has pointed towards evidence of SARS-CoV-2 RNA in both treated and raw municipal wastewater discharged by communities. Therefore, concerns regarding it being a possible enteric virus are abundant. Past history of SARS-CoV-1 outbreaks and viral survival information helps in establishing information regarding possible viral infectivity and survival of SARS-CoV-2. The paper examines the existing strategies and techniques including the efficacy of laboratory-based RT-qPCR technique for tracking environmental persistence and community transmission of COVID-19. Analysis of studies targeting untreated and treated wastewater as source of samples is carried out. The analysis shows that untreated samples were mostly positive for SARS-CoV-2 RNA in the target studies. Infectivity estimation from viral load data was found to be about two orders of magnitude higher than actual case data in one of the studies. Additionally, relevant research on environmental survivability of SARS-CoV-2 and possible gaps are examined. Biosensors and excretion metabolite tracking in viral detection are also examined, which hold tremendous importance for future research. Wastewater-based epidemiology (WBE) shows incredible promise in the near future for tracking environmental persistence and community transmission of highly infectious diseases such as SARS-CoV-2. With limited research available on SARS-CoV-2 with regard to WBE, it is imperative that focus be established on the evidence-based targeted studies.

Biosensors for the detection of disease outbreaks through wastewater-based epidemiology

Wastewater-Based Epidemiology (WBE) is a novel community-wide monitoring tool that provides comprehensive real-time data of the public and environmental health status and can contribute to public health interventions, including those related to infectious disease outbreaks (e.g., the ongoing COVID-19 pandemic). Nonetheless, municipalities without centralized laboratories are likely still not able to process WBE samples. Biosensors are a potentially cost-effective solution to monitor the development of diseases through WBE to prevent local outbreaks. This review discusses the economic and technical feasibility of eighteen recently developed biosensors for the detection and monitoring of infectious disease agents in wastewater, prospecting the prevention of future pandemics.

A review on the contamination of SARS-CoV-2 in water bodies: Transmission route, virus recovery and recent biosensor detection techniques

The discovery of SARS-CoV-2 virus in the water bodies has been reported, and the risk of virus transmission to human via the water route due to poor wastewater management cannot be disregarded. The main source of the virus in water bodies is the sewage network systems which connects to the surface water. Wastewater-based epidemiology has been applied as an early surveillance tool to sense SARS-CoV-2 virus in the sewage network. This review discussed possible transmission routes of the SARS-CoV-2 virus and the challenges of the existing method in detecting the virus in wastewater. One significant challenge for the detection of the virus is that the high virus loading is diluted by the sheer volume of the wastewater. Hence, virus preconcentration from water samples prior to the application of virus assay is essential to accurately detect traceable virus loading. The preparation time, materials and conditions, virus type, recovery percentage, and various virus recovery techniques are comprehensively discussed in this review. The practicability of molecular methods such as Polymer-Chain-Reaction (PCR) for the detection of SARS-CoV-2 in wastewater will be revealed. The conventional virus detection techniques have several shortcomings and the potential of biosensors as an alternative is also considered. Biosensing techniques have also been proposed as an alternative to PCR and have reported detection limits of 10 pg/μl. This review serves to guide the reader on the future designs and development of highly sensitive, robust and, cost effective SARS-CoV-2 lab-on-a-chip biosensors for use in complex wastewater.

Insight into prognostics, diagnostics, and management strategies for SARS CoV-2

The foremost challenge in countering infectious diseases is the shortage of effective therapeutics. The emergence of coronavirus disease (COVID-19) outbreak has posed a great menace to the public health system globally, prompting unprecedented endeavors to contain the virus. Many countries have organized research programs for therapeutics and management development. However, the longstanding process has forced authorities to implement widespread infrastructures for detailed prognostic and diagnostics study of severe acute respiratory syndrome (SARS CoV-2). This review discussed nearly all the globally developed diagnostic methodologies reported for SARS CoV-2 detection. We have highlighted in detail the approaches for evaluating COVID-19 biomarkers along with the most employed nucleic acid- and protein-based detection methodologies and the causes of their severe downfall and rejection. As the variable variants of SARS CoV-2 came into the picture, we captured the breadth of newly integrated digital sensing prototypes comprised of plasmonic and field-effect transistor-based sensors along with commercially available food and drug administration (FDA) approved detection kits. However, more efforts are required to exploit the available resources to manufacture cheap and robust diagnostic methodologies. Likewise, the visualization and characterization tools along with the current challenges associated with waste-water surveillance, food security, contact tracing, and their role during this intense period of the pandemic have also been discussed. We expect that the integrated data will be supportive and aid in the evaluation of sensing technologies not only in current but also future pandemics.

Risks and new challenges in the food chain: Viral contamination and decontamination from a global perspective, guidelines, and cleaning

Even during the continuing world pandemic of severe acute respiratory syndrome coronavirus 2 (SARS CoV-2), consumers remain exposed to the risk of getting infected by existing, emerging, or re-emerging foodborne and waterborne viruses. SARS-CoV-2 is different in that it is transmitted directly via the airborne route (droplets and aerosols) or indirect contact (surfaces contaminated with SARS-CoV-2). International food and health organizations and national regulatory bodies have provided guidance to protect individuals active in food premises from potential occupational exposure to SARS-CoV-2, and have recommended chemicals effective in controlling the virus. Additionally, to exclude transmission of foodborne and waterborne viruses, hygiene practices to remove viral contaminants from surfaces are applied in different stages of the food chain (e.g., food plants, food distribution, storage, retail sector, etc.), while new and enhanced measures effective in the control of all types of viruses are under development. This comprehensive review aims to analyze and compare efficacies of existing cleaning practices currently used in the food industry to remove pathogenic viruses from air, nonfood, and food contact surfaces, as well as from food surfaces. In addition, the classification, modes of transmission, and survival of food and waterborne viruses, as well as SARS-CoV-2 will be presented. The international guidelines and national regulations are summarized in terms of virucidal chemical agents and their applications.

First comparison of conventional activated sludge versus root-zone treatment for SARS-CoV-2 RNA removal from wastewaters: Statistical and temporal significance

In the initial pandemic phase, effluents from wastewater treatment facilities were reported mostly free from Severe Acute Respiratory Coronavirus 2 (SARS-CoV-2) RNA, and thus conventional wastewater treatments were generally considered effective. However, there is a lack of first-hand data on i) comparative efficacy of various treatment processes for SARS-CoV-2 RNA removal; and ii) temporal variations in the removal efficacy of a given treatment process in the backdrop of active COVID-19 cases. This work provides a comparative account of the removal efficacy of conventional activated sludge (CAS) and root zone treatments (RZT) based on weekly wastewater surveillance data, consisting of forty-four samples, during a two-month period. The average genome concentration was higher in the inlets of CAS-based wastewater treatment plant (WWTP) in the Sargasan ward (1.25 × 103 copies/ L), than that of RZT-based WWTP (7.07 × 102 copies/ L) in an academic institution campus of Gandhinagar, Gujarat, India. ORF 1ab and S genes appeared to be more sensitive to treatment i.e., significantly reduced (p < 0.05) than N genes (p > 0.05). CAS treatment exhibited better RNA removal efficacy (p = 0.014) than RZT (p = 0.032). Multivariate analyses suggested that the effective genome concentration should be calculated based on the presence/absence of multiple genes. The present study stresses that treated effluents are not always free from SARS-CoV-2 RNA, and the removal efficacy of a given WWTP is prone to exhibit temporal variability owing to variations in active COVID-19 cases in the vicinity and genetic material accumulation over the time. Disinfection seems less effective than the adsorption and coagulation processes for SARS-CoV-2 removal. Results stress the need for further research on mechanistic insight on SARS-CoV-2 removal through various treatment processes taking solid-liquid partitioning into account.

Exploring the integrity of targeted PFASs in extracted wastewater samples during transport and storage stages

Little information exists on the effects of shipping and handling on per- and polyfluoroalkyl substances (PFASs) in environmental samples. Thus, we evaluated the integrity of dried wastewater extracts and the sensitivity of our high-resolution mass spectrometry (HRMS) instrument to perform such analyses by monitoring 13 representative PFASs in samples extracted, evaporated, and stored at room temperature up to one month. Relative to zero-day recoveries of six detected PFASs ranged between 94 and 124% (RSD <38%) for influents, between 88 and 126% (RSD <18%) for effluents after 28 days. Larger variabilities are tentatively associated with the lack of specific mass-labeled standards and the interactions between analytes and remaining matrix components over time. In a second stage, a mix of local and international dry-shipped wastewater samples were analyzed and the same PFASs were quantified. Up to six PFASs were identified, with median concentrations ranging from 1.3 (perfluoro butyl sulfonate (PFBS)) to 7.7 ng/L (perfluoro hexanoic acid (PFHxA)) and from 1.5 (PFBS) to 13.8 ng/L (PFHxA) in local influents and effluents respectively; and from 0.7 (perfluoro hexyl sulfonate (PFHxS)) to 52.8 ng/L (PFHxA) and from 0.5 (PFHxS) to 21.4 ng/L (PFHxA) in Greek influents and effluents, respectively. The importance of this study lies on the need to consider the wider recovery shifts and expanded variability ranges of PFASs derived from the transport and storage times of dried extracts, particularly when applied to HRMS and wide-scope screening approaches.

Rolling Circle Amplification as an Efficient Analytical Tool for Rapid Detection of Contaminants in Aqueous Environments

Environmental contaminants are a global concern, and an effective strategy for remediation is to develop a rapid, on-site, and affordable monitoring method. However, this remains challenging, especially with regard to the detection of various contaminants in complex water environments. The application of molecular methods has recently attracted increasing attention; for example, rolling circle amplification (RCA) is an isothermal enzymatic process in which a short nucleic acid primer is amplified to form a long single-stranded nucleic acid using a circular template and special nucleic acid polymerases. Furthermore, this approach can be further engineered into a device for point-of-need monitoring of environmental pollutants. In this paper, we describe the fundamental principles of RCA and the advantages and disadvantages of RCA assays. Then, we discuss the recently developed RCA-based tools for environmental analysis to determine various targets, including heavy metals, organic small molecules, nucleic acids, peptides, proteins, and even microorganisms in aqueous environments. Finally, we summarize the challenges and outline strategies for the advancement of this technique for application in contaminant monitoring.

Placing sensors in sewer networks: A system to pinpoint new cases of coronavirus

We consider a proposed system that would place sensors in a number of wastewater manholes in a community in order to detect genetic remnants of SARS-Cov-2 found in the excreted stool of infected persons. These sensors would continually monitor the manhole's wastewater, and whenever virus remnants are detected, transmit an alert signal. In a recent paper, we described two new algorithms, each sequentially opening and testing successive manholes for genetic remnants, each algorithm homing in on a neighborhood where the infected person or persons are located. This paper extends that work in six important ways: (1) we introduce the concept of in-manhole sensors, as these sensors will reduce the number of manholes requiring on-site testing; (2) we present a realistic tree network depicting the topology of the sewer pipeline network; (3) for simulations, we present a method to create random tree networks exhibiting key attributes of a given community; (4) using the simulations, we empirically demonstrate that the mean and median number of manholes to be opened in a search follows a well-known logarithmic function; (5) we develop procedures for determining the number of sensors to deploy; (6) we formulate the sensor location problem as an integer nonlinear optimization and develop heuristics to solve it. Our sensor-manhole system, to be implemented, would require at least three additional steps in R&D: (a) an accurate, inexpensive and fast SARS-Cov-2 genetic-remnants test that can be done at the manhole; (b) design, test and manufacture of the sensors; (c) in-the-field testing and fine tuning of an implemented system.

Paper-Based Microfluidic Sensors for Onsite Environmental Detection: A Critical Review

A newly developed research topic, fabricated paper-based microfluidic sensors, was discussed in the field of low-cost environmental detection. Distinguished with the traditional dipstick or lateral-flow setups, these paper-based microfluidic sensors can serve as a tool for onsite quantitative and semi-quantitative measurements, without risks to cause environmental pollution. They have attracted increasing interest since the first easy-fabricated paper-based setup reported by Whitesides group in 2007. Most of the publications utilized paper-based sensors in clinical detection. In recent years, some groups started to use these sensors in environmental measurement, leading to precise, easy operation, low-cost, and eco-friendly methods for onsite detection. In this review, paper-based microfluidic sensors were briefly introduced, followed by literatures review and discussion for future perspectives.

Biosensors for wastewater-based epidemiology for monitoring public health

Public health is attracting increasing attention due to the current global pandemic, and wastewater-based epidemiology (WBE) has emerged as a powerful tool for monitoring of public health by analysis of a variety of biomarkers (e.g., chemicals and pathogens) in wastewater. Rapid development of WBE requires rapid and on-site analytical tools for monitoring of sewage biomarkers to provide immediate decision and intervention. Biosensors have been demonstrated to be highly sensitive and selective tools for the analysis of sewage biomarkers due to their fast response, ease-to-use, low cost and the potential for field-testing. This paper presents biosensors as effective tools for wastewater analysis of potential biomarkers and monitoring of public health via WBE. In particular, we discuss the use of sewage sensors for rapid detection of a range of targets, including rapid monitoring of community-wide illicit drug consumption and pathogens for early warning of infectious diseases outbreaks. Finally, we provide a perspective on the future use of the biosensor technology for WBE to enable rapid on-site monitoring of sewage, which will provide nearly real-time data for public health assessment and effective intervention.

Detection of SARS-CoV-2 in wastewater in Japan during a COVID-19 outbreak

The presence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in wastewater samples has been documented in several countries. Wastewater-based epidemiology (WBE) is potentially effective for early warning of a COVID-19 outbreak. In this study, presence of SARS-CoV-2 RNA in wastewater samples was investigated and was compared with the number of the confirmed COVID-19 cases in the study area during COVID-19 outbreak in Japan. In total, 45 influent wastewater samples were collected from five wastewater treatment plants in Ishikawa and Toyama prefectures in Japan. During the study period, the numbers of confirmed COVID-19 cases in these prefectures increased from 0.3 and 0 to >20 per 100,000 people. SARS-CoV-2 ribonucleic acid (RNA) in the samples was detected using several PCR-based assays. Of the 45 samples, 21 were positive for SARS-CoV-2 according to at least one of the three quantitative RT-PCR assays. The detection frequency increased when the number of total confirmed SARS-CoV-2 cases in 100,000 people exceeded 10 in each prefecture; however, SARS-CoV-2 could also be detected at a low frequency even when the number was below 1.0. SARS-CoV-2 in wastewater could be detected in the early stage of the epidemic, even if the number of confirmed cases potentially underestimates the actual numbers of cases. This suggests that WBE approach can potentially act as an early warning of COVID-19 outbreaks in Japan.

Decay of SARS-CoV-2 RNA along the wastewater treatment outfitted with Upflow Anaerobic Sludge Blanket (UASB) system evaluated through two sample concentration techniques

For the first time, we present, i) an account of decay in the genetic material loading of SARS-CoV-2 during Upflow Anaerobic Sludge Blanket (UASB) treatment of wastewater, and ii) comparative evaluation of polyethylene glycol (PEG), and ultrafiltration as virus concentration methods from wastewater for the quantification of SARS-CoV-2 genes. The objectives were achieved through tracking of SARS-CoV-2 genetic loadings i.e. ORF1ab, N and S protein genes on 8th and 27th May 2020 along the wastewater treatment plant (106000 m³ million liters per day) equipped with UASB system in Ahmedabad, India. PEG method performed better in removing materials inhibiting RT-qPCR for SARS-CoV-2 gene detection from the samples, as evident from constant and lower C_T values of control (MS2). Using the PEG method, we found a reduction >1.3 log₁₀ reduction in SARS-CoV-2 RNA abundance during UASB treatment, and the RNA was not detected at all in the final effluent. The study implies that i) conventional wastewater treatment systems is effective in SARS-CoV-2 RNA removal, and ii) UASB system significantly reduces SARS-CoV-2 genetic loadings. Finally, PEG method is recommended for better sensitivity and inhibition removal during SARS-CoV-2 RNA quantification in wastewater.

A Comprehensive Review of Detection Methods for SARS-CoV-2

Recently, the outbreak of the coronavirus disease 2019 (COVID-19), caused by the SARS-CoV-2 virus, in China and its subsequent spread across the world has caused numerous infections and deaths and disrupted normal social activity. Presently, various techniques are used for the diagnosis of SARS-CoV-2 infection, with various advantages and weaknesses to each. In this paper, we summarize promising methods, such as reverse transcription-polymerase chain reaction (RT-PCR), serological testing, point-of-care testing, smartphone surveillance of infectious diseases, nanotechnology-based approaches, biosensors, amplicon-based metagenomic sequencing, smartphone, and wastewater-based epidemiology (WBE) that can also be utilized for the detection of SARS-CoV-2. In addition, we discuss principles, advantages, and disadvantages of these detection methods, and highlight the potential methods for the development of additional techniques and products for early and fast detection of SARS-CoV-2.

First proof of the capability of wastewater surveillance for COVID-19 in India through detection of genetic material of SARS-CoV-2

We made the first ever successful effort in India to detect the genetic material of SARS-CoV-2 viruses to understand the capability and application of wastewater-based epidemiology (WBE) surveillance in India. Sampling was carried out on 8 and 27 May 2020 at the Old Pirana Waste Water Treatment Plant (WWTP) at Ahmedabad, Gujarat that receives effluent from Civil Hospital treating COVID-19 patients. All three, i.e. ORF1ab, N and S genes of SARS-CoV-2, were found in the influent with no genes detected in effluent collected on 8 and 27 May 2020. Increase in SARS-CoV-2 genetic loading in the wastewater between 8 and 27 May 2020 samples concurred with corresponding increase in the number of active COVID-19 patients in the city. The number of gene copies was comparable to that reported in untreated wastewaters of Australia, China and Turkey and lower than that of the USA, France and Spain. However, temporal changes in SARS-CoV-2 RNA concentrations need to be substantiated further from the perspectives of daily and short-term changes of SARS-CoV-2 in wastewater through long-term monitoring. The study results SARS-CoV-2 will assist concerned authorities and policymakers to formulate and/or upgrade COVID-19 surveillance to have a more explicit picture of the pandemic curve. While infectivity of SARS-CoV-2 through the excreted viral genetic material in the aquatic environment is still being debated, the presence and detection of genes in wastewater systems makes a strong case for the environmental surveillance of the COVID-19 pandemic.

First proof of the capability of wastewater surveillance for COVID-19 in India through detection of genetic material of SARS-CoV-2

We made the first ever successful effort in India to detect the genetic material of SARS-CoV-2 viruses to understand the capability and application of wastewater-based epidemiology (WBE) surveillance in India. Sampling was carried out on 8 and 27 May 2020 at the Old Pirana Waste Water Treatment Plant (WWTP) at Ahmedabad, Gujarat that receives effluent from Civil Hospital treating COVID-19 patients. All three, i.e. ORF1ab, N and S genes of SARS-CoV-2, were found in the influent with no genes detected in effluent collected on 8 and 27 May 2020. Increase in SARS-CoV-2 genetic loading in the wastewater between 8 and 27 May 2020 samples concurred with corresponding increase in the number of active COVID-19 patients in the city. The number of gene copies was comparable to that reported in untreated wastewaters of Australia, China and Turkey and lower than that of the USA, France and Spain. However, temporal changes in SARS-CoV-2 RNA concentrations need to be substantiated further from the perspectives of daily and short-term changes of SARS-CoV-2 in wastewater through long-term monitoring. The study results SARS-CoV-2 will assist concerned authorities and policymakers to formulate and/or upgrade COVID-19 surveillance to have a more explicit picture of the pandemic curve. While infectivity of SARS-CoV-2 through the excreted viral genetic material in the aquatic environment is still being debated, the presence and detection of genes in wastewater systems makes a strong case for the environmental surveillance of the COVID-19 pandemic.

An integrated biosensor system with mobile health and wastewater-based epidemiology (iBMW) for COVID-19 pandemic

The outbreak of coronavirus disease (COVID-19) has caused a significant public health challenge worldwide. A lack of effective methods for screening potential patients, rapidly diagnosing suspected cases, and accurately monitoring of the epidemic in real time to prevent the rapid spread of COVID-19 raises significant difficulties in mitigating the epidemic in many countries. As effective point-of-care diagnosis tools, simple, low-cost and rapid sensors have the potential to greatly accelerate the screening and diagnosis of suspected patients to improve their treatment and care. In particular, there is evidence that multiple pathogens have been detected in sewage, including SARS-CoV-2, providing significant opportunities for the development of advanced sensors for wastewater-based epidemiology that provide an early warning of the pandemic within the population. Sensors could be used to screen potential carriers, provide real-time monitoring and control of the epidemic, and even support targeted drug screening and delivery within the integration of emerging mobile health (mHealth) technology. In this communication, we discuss the feasibility of an integrated point-of-care biosensor system with mobile health for wastewater-based epidemiology (iBMW) for early warning of COVID-19, screening and diagnosis of potential infectors, and improving health care and public health. The iBMW will provide an effective approach to prevent, evaluate and intervene in a fast, affordable and reliable way, thus enabling real-time guidance for the government in providing effective intervention and evaluating the effectiveness of intervention.

The potential of wastewater-based epidemiology as surveillance and early warning of infectious disease outbreaks

Infectious diseases caused by pathogens have become one of the main threats to public health. Efficient monitoring of infectious disease transmission is critical to prevent and manage infectious disease epidemics. Wastewater-based epidemiology (WBE) is an efficient approach with great potential for early warning of infectious disease transmission and outbreaks. By analyzing infectious disease biomarkers in wastewater taken from wastewater collection points, the transmission of infectious diseases in certain areas can be comprehensively monitored in near real time. This short review presents WBE as a surveillance and early warning system for infectious disease outbreaks regarding pathogens with pandemic potential. We also discuss the challenges and perspective of WBE in infectious disease surveillance and early warning.

Nanomaterial-based aptamer sensors for analysis of illicit drugs and evaluation of drugs consumption for wastewater-based epidemiology

The abuse of illicit drugs usually associated with dramatic crimes may cause significant problems for the whole society. Wastewater-based epidemiology (WBE) has been demonstrated to be a novel and cost-effective way to evaluate the abuse of illicit drugs at the community level, and has been used as a routine method for monitoring and played a significant role for combating the crimes in some countries, e.g. China. The method can also provide temporal and spatial variation of drugs of abuse. The detection methods mainly remain on the conventional liquid chromatography coupled with mass spectrometry, which is extremely sensitive and selective, however needs advanced facility and well-trained personals, thus limit it in the lab. As an alternative, sensors have emerged to be a powerful analytical tool for a wide spectrum of analytes, in particular aptamer sensors (aptasensors) have attracted increasing attention and could act as an efficient tool in this field due to the excellent characteristics of selectivity, sensitivity, low cost, miniaturization, easy-to-use, and automation. In this review, we will briefly introduce the context, specific assessment process and applications of WBE and the recent progress of illicit drug aptasensors, in particular focusing on optical and electrochemical sensors. We then highlight several recent aptasensors for illicit drugs in new technology integration and discuss the feasibility of these aptasensor for WBE. We will summarize the challenges and propose our insights and opportunity on aptasensor for WBE to evaluate community-wide drug use trends and public health.

Opportunities and Challenges for Biosensors and Nanoscale Analytical Tools for Pandemics: COVID-19

Biosensors and nanoscale analytical tools have shown huge growth in literature in the past 20 years, with a large number of reports on the topic of 'ultrasensitive', 'cost-effective', and 'early detection' tools with a potential of 'mass-production' cited on the web of science. Yet none of these tools are commercially available in the market or practically viable for mass production and use in pandemic diseases such as coronavirus disease 2019 (COVID-19). In this context, we review the technological challenges and opportunities of current bio/chemical sensors and analytical tools by critically analyzing the bottlenecks which have hindered the implementation of advanced sensing technologies in pandemic diseases. We also describe in brief COVID-19 by comparing it with other pandemic strains such as that of severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS) for the identification of features that enable biosensing. Moreover, we discuss visualization and characterization tools that can potentially be used not only for sensing applications but also to assist in speeding up the drug discovery and vaccine development process. Furthermore, we discuss the emerging monitoring mechanism, namely wastewater-based epidemiology, for early warning of the outbreak, focusing on sensors for rapid and on-site analysis of SARS-CoV2 in sewage. To conclude, we provide holistic insights into challenges associated with the quick translation of sensing technologies, policies, ethical issues, technology adoption, and an overall outlook of the role of the sensing technologies in pandemics.

Smart Sanitation-Biosensors as a Public Health Tool in Sanitation Infrastructure

The health of individuals and communities is more interconnected than ever, and emergent technologies have the potential to improve public health monitoring at both the community and individual level. A systematic literature review of peer-reviewed and gray literature from 2000-present was conducted on the use of biosensors in sanitation infrastructure (such as toilets, sewage pipes and septic tanks) to assess individual and population health. 21 relevant papers were identified using PubMed, Embase, Global Health, CDC Stacks and NexisUni databases and a reflexive thematic analysis was conducted. Biosensors are being developed for a range of uses including monitoring illicit drug usage in communities, screening for viruses and diagnosing conditions such as diabetes. Most studies were nonrandomized, small-scale pilot or lab studies. Of the sanitation-related biosensors found in the literature, 11 gathered population-level data, seven provided real-time continuous data and 14 were noted to be more cost-effective than traditional surveillance methods. The most commonly discussed strength of these technologies was their ability to conduct rapid, on-site analysis. The findings demonstrate the potential of this emerging technology and the concept of Smart Sanitation to enhance health monitoring at the individual level (for diagnostics) as well as at the community level (for disease surveillance).

Future perspectives of wastewater-based epidemiology: Monitoring infectious disease spread and resistance to the community level

Infectious diseases are acknowledged as one of the most critical threats to global public health today. Climate change, unprecedented population growth with accelerated rates of antimicrobial resistance, have resulted in both the emergence of novel pathogenic organisms and the re-emergence of infections that were once controlled. The consequences have led to an increased vulnerability to infectious diseases globally. The ability to rapidly monitor the spread of diseases is key for prevention, intervention and control, however several limitations exist for current surveillance systems and the capacity to cope with the rapid population growth and environmental changes. Wastewater-Based Epidemiology (WBE) is a new epidemiology tool that has potential to act as a complementary approach for current infectious disease surveillance systems and an early warning system for disease outbreaks. WBE postulates that through the analysis of population pooled wastewater, infectious disease and resistance spread, the emergence of new disease outbreak to the community level can be monitored comprehensively and in real-time. This manuscript provides critical overview of current infectious disease surveillance status, as well as it introduces WBE and its recent advancements. It also provides recommendations for further development required for WBE application as an effective tool for infectious disease surveillance.

Paper-based microfluidics for rapid diagnostics and drug delivery

Paper is a common material that is promising for constructing microfluidic chips (lab-on-a-paper) for diagnostics and drug delivery for biomedical applications. In the past decade, extensive research on paper-based microfluidics has accumulated a large number of scientific publications in the fields of biomedical diagnosis, food safety, environmental health, drug screening and delivery. This review focuses on the recent progress on paper-based microfluidic technology with an emphasis on the design, optimization and application of the technology platform, in particular for medical diagnostics and drug delivery. Novel advances have concentrated on engineering paper devices for point-of-care (POC) diagnostics, which could be integrated with nucleic acid-based tests and isothermal amplification experiments, enabling rapid sample-to-answer assays for field testing. Among the isothermal amplification experiments, loop-mediated isothermal amplification (LAMP), an extremely sensitive nucleic acid test, specifically identifies ultralow concentrations of DNA/RNA from practical samples for diagnosing diseases. We thus mainly focus on the paper device-based LAMP assay for the rapid infectious disease diagnosis, foodborne pathogen analysis, veterinary diagnosis, plant diagnosis, and environmental public health evaluation. We also outlined progress on paper microfluidic devices for drug delivery. The paper concludes with a discussion on the challenges of this technology and our insights into how to advance science and technology towards the development of fully functional paper devices in diagnostics and drug delivery.

The role of analytical chemistry in exposure science: Focus on the aquatic environment

Exposure science, in its broadest sense, studies the interactions between stressors (chemical, biological, and physical agents) and receptors (e.g. humans and other living organisms, and non-living items like buildings), together with the associated pathways and processes potentially leading to negative effects on human health and the environment. The aquatic environment may contain thousands of compounds, many of them still unknown, that can pose a risk to ecosystems and human health. Due to the unquestionable importance of the aquatic environment, one of the main challenges in the field of exposure science is the comprehensive characterization and evaluation of complex environmental mixtures beyond the classical/priority contaminants to new emerging contaminants. The role of advanced analytical chemistry to identify and quantify potential chemical risks, that might cause adverse effects to the aquatic environment, is essential. In this paper, we present the strategies and tools that analytical chemistry has nowadays, focused on chromatography hyphenated to (high-resolution) mass spectrometry because of its relevance in this field. Key issues, such as the application of effect direct analysis to reduce the complexity of the sample, the investigation of the huge number of transformation/degradation products that may be present in the aquatic environment, the analysis of urban wastewater as a source of valuable information on our lifestyle and substances we consumed and/or are exposed to, or the monitoring of drinking water, are discussed in this article. The trends and perspectives for the next few years are also highlighted, when it is expected that new developments and tools will allow a better knowledge of chemical composition in the aquatic environment. This will help regulatory authorities to protect water bodies and to advance towards improved regulations that enable practical and efficient abatements for environmental and public health protection.

Mass spectrometric strategies for the investigation of biomarkers of illicit drug use in wastewater

The analysis of illicit drugs in urban wastewater is the basis of wastewater-based epidemiology (WBE), and has received much scientific attention because the concentrations measured can be used as a new non-intrusive tool to provide evidence-based and real-time estimates of community-wide drug consumption. Moreover, WBE allows monitoring patterns and spatial and temporal trends of drug use. Although information and expertise from other disciplines is required to refine and effectively apply WBE, analytical chemistry is the fundamental driver in this field. The use of advanced analytical techniques, commonly based on combined chromatography-mass spectrometry, is mandatory because the very low analyte concentration and the complexity of samples (raw wastewater) make quantification and identification/confirmation of illicit drug biomarkers (IDBs) troublesome. We review the most-recent literature available (mostly from the last 5 years) on the determination of IDBs in wastewater with particular emphasis on the different analytical strategies applied. The predominance of liquid chromatography coupled to tandem mass spectrometry to quantify target IDBs and the essence to produce reliable and comparable results is illustrated. Accordingly, the importance to perform inter-laboratory exercises and the need to analyze appropriate quality controls in each sample sequence is highlighted. Other crucial steps in WBE, such as sample collection and sample pre-treatment, are briefly and carefully discussed. The article further focuses on the potential of high-resolution mass spectrometry. Different approaches for target and non-target analysis are discussed, and the interest to perform experiments under laboratory-controlled conditions, as a complementary tool to investigate related compounds (e.g., minor metabolites and/or transformation products in wastewater) is treated. The article ends up with the trends and future perspectives in this field from the authors' point of view. © 2016 Wiley Periodicals, Inc. Mass Spec Rev 37:258-280, 2018.

Wastewater Analysis for Community-Wide Drugs Use Assessment

Wastewater-based epidemiology (WBE) complements existing epidemiology-based estimation techniques and provides objective, evidence-based estimates of illicit drug use. After consumption, biomarkers - drugs and their metabolites - excreted to toilets and flushed into urban sewer networks can be measured in raw wastewater samples. The quantified loads can serve as an estimate for the collective consumption of all people contributing to the wastewater sample. This transdisciplinary approach, further explained in this chapter, has developed, matured and is now established for monitoring substances such as cocaine and amphetamine-type stimulants. Research currently underway is refining WBE to new applications including new psychoactive substances (NPS).

Monitoring Genetic Population Biomarkers for Wastewater-Based Epidemiology

We report a rapid "sample-to-answer" platform that can be used for the quantitative monitoring of genetic biomarkers within communities through the analysis of wastewater. The assay is based on the loop-mediated isothermal amplification (LAMP) of nucleic acid biomarkers and shows for the first time the ability to rapidly quantify human-specific mitochondrial DNA (mtDNA) from raw untreated wastewater samples. mtDNA provides a model population biomarker associated with carcinogenesis including breast, renal and gastric cancers. To enable a sample-to-answer, field-based technology, we integrated a filter to remove solid impurities and perform DNA extraction and enrichment into a low cost lateral flow-based test. We demonstrated mtDNA detection over seven consecutive days, achieving a limit of detection of 40 copies of human genomic DNA per reaction volume. The assay can be performed at the site of sample collection, with minimal user intervention, yielding results within 45 min and providing a method to monitor public health from wastewater.

Introduction to biosensors

Biosensors are nowadays ubiquitous in biomedical diagnosis as well as a wide range of other areas such as point-of-care monitoring of treatment and disease progression, environmental monitoring, food control, drug discovery, forensics and biomedical research. A wide range of techniques can be used for the development of biosensors. Their coupling with high-affinity biomolecules allows the sensitive and selective detection of a range of analytes. We give a general introduction to biosensors and biosensing technologies, including a brief historical overview, introducing key developments in the field and illustrating the breadth of biomolecular sensing strategies and the expansion of nanotechnological approaches that are now available.

The Potential of Knowing More: A Review of Data-Driven Urban Water Management

The promise of collecting and utilizing large amounts of data has never been greater in the history of urban water management (UWM). This paper reviews several data-driven approaches which play a key role in bringing forward a sea change. It critically investigates whether data-driven UWM offers a promising foundation for addressing current challenges and supporting fundamental changes in UWM. We discuss the examples of better rain-data management, urban pluvial flood-risk management and forecasting, drinking water and sewer network operation and management, integrated design and management, increasing water productivity, wastewater-based epidemiology and on-site water and wastewater treatment. The accumulated evidence from literature points toward a future UWM that offers significant potential benefits thanks to increased collection and utilization of data. The findings show that data-driven UWM allows us to develop and apply novel methods, to optimize the efficiency of the current network-based approach, and to extend functionality of today's systems. However, generic challenges related to data-driven approaches (e.g., data processing, data availability, data quality, data costs) and the specific challenges of data-driven UWM need to be addressed, namely data access and ownership, current engineering practices and the difficulty of assessing the cost benefits of data-driven UWM.

Estimating population size in wastewater-based epidemiology. Valencia metropolitan area as a case study

Wastewater can provide a wealth of epidemiologic data on common drugs consumed and on health and nutritional problems based on the biomarkers excreted into community sewage systems. One of the biggest uncertainties of these studies is the estimation of the number of inhabitants served by the treatment plants. Twelve human urine biomarkers -5-hydroxyindoleacetic acid (5-HIAA), acesulfame, atenolol, caffeine, carbamazepine, codeine, cotinine, creatinine, hydrochlorothiazide (HCTZ), naproxen, salicylic acid (SA) and hydroxycotinine (OHCOT)- were determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS) to estimate population size. The results reveal that populations calculated from cotinine, 5-HIAA and caffeine are commonly in agreement with those calculated by the hydrochemical parameters. Creatinine is too unstable to be applicable. HCTZ, naproxen, codeine, OHCOT and carbamazepine, under or overestimate the population compared to the hydrochemical population estimates but showed constant results through the weekdays. The consumption of cannabis, cocaine, heroin and bufotenine in Valencia was estimated for a week using different population calculations.

Measuring biomarkers in wastewater as a new source of epidemiological information: Current state and future perspectives

The information obtained from the chemical analysis of specific human excretion products (biomarkers) in urban wastewater can be used to estimate the exposure or consumption of the population under investigation to a defined substance. A proper biomarker can provide relevant information about lifestyle habits, health and wellbeing, but its selection is not an easy task as it should fulfil several specific requirements in order to be successfully employed. This paper aims to summarize the current knowledge related to the most relevant biomarkers used so far. In addition, some potential wastewater biomarkers that could be used for future applications were evaluated. For this purpose, representative chemical classes have been chosen and grouped in four main categories: (i) those that provide estimates of lifestyle factors and substance use, (ii) those used to estimate the exposure to toxicants present in the environment and food, (iii) those that have the potential to provide information about public health and illness and (iv) those used to estimate the population size. To facilitate the evaluation of the eligibility of a compound as a biomarker, information, when available, on stability in urine and wastewater and pharmacokinetic data (i.e. metabolism and urinary excretion profile) has been reviewed. Finally, several needs and recommendations for future research are proposed.

Community Sewage Sensors towards Evaluation of Drug Use Trends: Detection of Cocaine in Wastewater with DNA-Directed Immobilization Aptamer Sensors

Illicit drug use has a global concern and effective monitoring and interventions are highly required to combat drug abuse. Wastewater-based epidemiology (WBE) is an innovative and cost-effective approach to evaluate community-wide drug use trends, compared to traditional population surveys. Here we report for the first time, a novel quantitative community sewage sensor (namely DNA-directed immobilization of aptamer sensors, DDIAS) for rapid and cost-effective estimation of cocaine use trends via WBE. Thiolated single-stranded DNA (ssDNA) probe was hybridized with aptamer ssDNA in solution, followed by co-immobilization with 6-mercapto-hexane onto the gold electrodes to control the surface density to effectively bind with cocaine. DDIAS was optimized to detect cocaine at as low as 10 nM with a dynamic range from 10 nM to 5 μM, which were further employed for the quantification of cocaine in wastewater samples collected from a wastewater treatment plant in seven consecutive days. The concentration pattern of the sampling week is comparable with that from mass spectrometry. Our results demonstrate that the developed DDIAS can be used as community sewage sensors for rapid and cost-effective evaluation of drug use trends, and potentially implemented as a powerful tool for on-site and real-time monitoring of wastewater by un-skilled personnel.

G-quadruplex–hemin DNAzyme molecular beacon probe for the detection of methamphetamine

In this work, a simple, cost-effective, and label-free biosensor was constructed for methamphetamine (METH) detection.