Tracking the Spatial Fate of PCDD/F Emissions from a Cement Plant by Using Lichens as Environmental Biomonitors

Microbial reductive dechlorination of polychlorinated dibenzo-p-dioxins: Pathways and features unravelled via electron density

Microbial reductive dechlorination provides a promising approach for remediating sites contaminated with polychlorinated dibenzo-p-dioxins (PCDDs). Nonetheless, the overall dechlorination pathways and features remain elusive. Herein, we address these issues by quantum chemical calculations, considering the calibrations of reductive dechlorination of 15 PCDDs mediated by three Dehalococcoides strains. Chlorine substituents with lower electron density are prone to be microbially abstracted, which differentiates 72 microbe-active PCDDs from 3 nonactive analogues with a success rate of 100%. For all 256 transformation routes of 75 PCDDs, electron density differences of chlorines pinpoint 105 viable and 125 unviable pathways, corresponding a success rate of 90%. The feasibility of 26 reductive dechlorination pathways are uncertain because of the limited available experimental data. 98% (251/256) of microbial chlorine abstraction follows an order of Cl_O,Cl>Cl_Cl,Cl>Cl_H,O>Cl_H,Cl>Cl_H,H=0. PCDDs solely containing chlorines at C₁, C₄, C₆, and/or C₉ can be completely dechlorinated to non-chlorinated dioxin; while PCDDs housing chlorines at C₂, C₃, C₇, and/or C₈ can be dechlorinated to 2-MCDD or 2,7/8-DCDD as final products. These findings also support reductive dechlorination of PCDDs in mixed cultures and sediments (> 98% and 83%). These findings would promote the application of dechlorinating bacteria in targeted remediation and facilitate the respective studies on other POPs.

High spatial resolution analysis of polybrominated diphenyl ethers (PBDEs) using transplanted lichen Evernia prunastri: A case study in central Italy

The ability of transplanted lichen Evernia (E.) prunastri (L.) to act as a high spatial biomonitoring tool for 14 polybrominated diphenyl ethers (PBDEs) was evaluated at 23 monitoring sites in a very polluted area in central Italy. The selected area is characterized by the presence of numerous emission sources, such as waste-to-energy plant, steel plant, vehicular traffic, and domestic heating. Transplanted E. prunastri proved to be a useful tool to biomonitor PBDEs, due to its ability to bioaccumulate individual congeners in varying concentrations in relation to the strength of the emission sources present over the territory. PBDEs levels widely ranged from 132 to 24,237 ng kg^-1 dry weight, according to the sources of emission located around the monitoring sites. The highest concentrations were detected at the sites close to the municipal solid waste incinerator, steel plant, and high busy roads, confirming their important role as PBDEs emissions sources.

Polychlorinated Naphthalene Congener Profiles in Common Vegetation on the Tibetan Plateau as Biomonitors of Their Sources and Transportation

Polychlorinated naphthalenes (PCNs) are globally transported, carcinogenic, persistent organic pollutants (POPs) that were recently added to the Stockholm Convention with 184 parties. The Tibetan Plateau plays an important role in the global transportation and distribution of POPs. Knowledge of PCN sources and transportation on the Tibetan Plateau is important for their control globally. In this study, we quantified the congener-specific concentrations of PCNs in lichen, moss, soil, and air samples collected on the Tibetan plateau and found that common lichens were effective biomonitors for predicting atmospheric PCNs in this area. The physiochemical properties of the PCNs, the temperatures, and the lichen lipid contents were identified as important factors influencing PCN partitioning between lichens and air. Lichen-air partitioning equations were established and used to predict PCN concentrations in air in Southeast Tibet. The lichens could be used as PCN biomonitors to clarify their spatial variations, sources, and transportation in the southeast of the plateau. PCN concentrations in lichens increased with altitude, suggesting that high-mountain cold-trapping influenced the PCN transportation behavior. Principal component analysis and linear discriminant analysis showed that the major source of PCNs in this region was long-range atmospheric transportation via the Indian monsoon in summer and wind from Southwest Asia in winter. This study provides a novel method using PCN congener profiles as fingerprints and statistical models for studying the geochemical effects of conditions in high-mountain regions on the contamination behaviors of 75 congeners of the notorious PCNs.

Community-Driven Hypothesis Testing: A Solution for the Tragedy of the Anticommons

Shared ownership of property and resources is a longstanding challenge throughout history that has been amplifying with the increasing development of industrial and postindustrial societies. Where governments, project planners, and commercial developers seek to develop new infrastructure, industrial projects, and various other land-and resource-intensive tasks, veto power shared by various local stakeholders can complicate or halt progress. Risk communication has been used as an attempt to address stakeholder concerns in these contexts, but has demonstrated shortcomings. These coordination failures between project planners and stakeholders can be described as a specific kind of social dilemma that we describe as the "tragedy of the anticommons." To overcome such dilemmas, we demonstrate how a two-step process can directly address public mistrust of project planners and public perceptions of limited decision-making authority. This approach is examined via two separate empirical field experiments in Portugal and Tunisia, where public resistance and anticommons problems threatened to derail emerging industrial projects. In both applications, an intervention is undertaken to address initial public resistance to such projects, where specific public stakeholders and project sponsors collectively engaged in a hypothesis-testing process to identify and assess human and environmental health risks associated with proposed industrial facilities. These field experiments indicate that a rigorous attempt to address public mistrust and perceptions of power imbalances and change the pay-off structure of the given dilemma may help overcome such anticommons problems in specific cases, and may potentially generate enthusiasm and support for such projects by local publics moving forward.

Characterization of atmospheric emission sources in lichen from metal and organic contaminant patterns

Lichen samples from contrasted environments, influenced by various anthropic activities, were investigated focusing on the contaminant signatures according to the atmospheric exposure typologies. Most of the contaminant concentrations measured in the 27 lichen samples, collected around the industrial harbor of Fos-sur-Mer (France), were moderate in rural and urban environments, and reached extreme levels in industrial areas and neighboring cities (Al up to 6567 mg kg^-1, Fe 42,398 mg kg^-1, or ΣPAH 1417 μg kg^-1 for example). At the same time, a strong heterogeneity was noticed in industrial samples while urban and rural ones were relatively homogeneous. Several metals could be associated to steel industry (Fe, Mn, Cd), road traffic, and agriculture (Sb, Cu, Sn), or to a distinct chemical installation (Mo). As well, PCDFs dominated in industrial samples while PCDDs prevailed in urban areas. The particularities observed supported the purpose of this work and discriminated the contributions of various atmospheric pollution emission sources in lichen samples. A statistical approach based on principal component analysis (PCA) was applied and resolved these potential singularities into specific component factors. Even if a certain degree of mixing of the factors is pointed out, relevant relationships were observed with several atmospheric emission sources. By this methodology, the contribution of industrial emissions to the atmospheric metal, PAH, PCB, and PCDD/F levels was roughly estimated to be 60.2%, before biomass burning (10.2%) and road traffic (3.8%). These results demonstrate that lichen biomonitoring offers an encouraging perspective of spatially resolved source apportionment studies.

Green spaces are not all the same for the provision of air purification and climate regulation services: The case of urban parks

The growing human population concentrated in urban areas lead to the increase of road traffic and artificial areas, consequently enhancing air pollution and urban heat island effects, among others. These environmental changes affect citizen's health, causing a high number of premature deaths, with considerable social and economic costs. Nature-based solutions are essential to ameliorate those impacts in urban areas. While the mere presence of urban green spaces is pointed as an overarching solution, the relative importance of specific vegetation structure, composition and management to improve the ecosystem services of air purification and climate regulation are overlooked. This avoids the establishment of optimized planning and management procedures for urban green spaces with high spatial resolution and detail. Our aim was to understand the relative contribution of vegetation structure, composition and management for the provision of ecosystem services of air purification and climate regulation in urban green spaces, in particular the case of urban parks. This work was done in a large urban park with different types of vegetation surrounded by urban areas. As indicators of microclimatic effects and of air pollution levels we selected different metrics: lichen diversity and pollutants accumulation in lichens. Among lichen diversity, functional traits related to nutrient and water requirements were used as surrogates of the capacity of vegetation to filter air pollution and to regulate climate, and provide air purification and climate regulation ecosystem services, respectively. This was also obtained with very high spatial resolution which allows detailed spatial planning for optimization of ecosystem services. We found that vegetation type characterized by a more complex structure (trees, shrubs and herbaceous layers) and by the absence of management (pruning, irrigation and fertilization) had a higher capacity to provide the ecosystems services of air purification and climate regulation. By contrast, lawns, which have a less complex structure and are highly managed, were associated to a lower capacity to provide these services. Tree plantations showed an intermediate effect between the other two types of vegetation. Thus, vegetation structure, composition and management are important to optimize green spaces capacity to purify air and regulate climate. Taking this into account green spaces can be managed at high spatial resolutions to optimize these ecosystem services in urban areas and contribute to improve human well-being.

Mapping Exposure to Multi-Pollutants Using Environmental Biomonitors-A Multi-Exposure Index

Atmosphere is a major pathway for transport and deposition of pollutants in the environment. In industrial areas, organic compounds are released or formed as by-products, such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F's). Inorganic chemical elements, including lead and arsenic, are also part of the pollutants mixture, and even in low concentrations may potentially be toxic and carcinogenic. However, assessing the spatial pattern of their deposition is difficult due to high spatial and temporal heterogeneity. Lichens have been used as biomonitors of atmospheric deposition, because these organisms encompass greater spatial detail than air monitoring stations and provide an integration of overall pollution. Based upon the ability of lichens to concentrate pollutants such as PCDD/F and chemical elements, the main objectives of this study were to develop a new semi-quantitative multi-pollutant toxicity exposure index (TEQ-like), derived from risk estimates, in an attempt to correlate several atmospheric pollutants to human exposure levels. The actual pollutant concentrations were measured in the environment, from biomonitors (organisms that integrate multi-pollutants), enabling interpolation and mapping of contaminant deposition within the region. Thus, the TEQ-like index provides a spatial representation not from absolute accumulation of the different pollutants, but from the accumulation weighted by their relative risk. The assessment of environmental human exposure to multi-pollutants through atmospheric deposition may be applied to industries to improve mitigation processes or to health stakeholders to target populations for a comprehensive risk assessment, epidemiological studies, and health recommendations.

The role of forest in mitigating the impact of atmospheric dust pollution in a mixed landscape

Atmospheric dust pollution, especially particulate matter below 2.5 μm, causes 3.3 million premature deaths per year worldwide. Although pollution sources are increasingly well known, the role of ecosystems in mitigating their impact is still poorly known. Our objective was to investigate the role of forests located in the surrounding of industrial and urban areas in reducing atmospheric dust pollution. This was tested using lichen transplants as biomonitors in a Mediterranean regional area with high levels of dry deposition. After a multivariate analysis, we have modeled the maximum pollution load expected for each site taking into consideration nearby pollutant sources. The difference between maximum expected pollution load and the observed values was explained by the deposition in nearby forests. Both the dust pollution and the ameliorating effect of forested areas were then mapped. The results showed that forest located nearby pollution sources plays an important role in reducing atmospheric dust pollution, highlighting their importance in the provision of the ecosystem service of air purification.