Graphene Oxides in Water: Correlating Morphology and Surface Chemistry with Aggregation Behavior

The colloidal stability of molybdenum disulfide nanosheets in different natural surface waters: Combined effects of water chemistry and light irradiation

With the increasing production and application, more molybdenum disulfide (MoS2) nanosheets could be released into environment. The aggregation and dispersion of MoS2 nanosheets profoundly impact their transport and transformation in the aquatic environment. However, the colloidal stability of MoS2 remains largely unknown in natural surface waters. This study investigated the colloidal stability of MoS2 nanosheets in six natural surface waters affected by both light irradiation and water chemistry. Compared to that of the pristine MoS2 nanosheets, the colloidal stability of MoS2 photoaged in ultrapure water declined. Light irradiation induced the formation of Mo-O bonds, the release of SO42- species, and the decrease in 1T/2H ratio, which reduced negative charge and enhanced hydrophobicity. However, the colloidal stability of MoS2 photoaged in natural surface waters was increased relative to that in ultrapure water not only for the smaller extent of photochemical transformation but more importantly the surface modification by water chemistry. Furthermore, the colloidal stability of MoS2 photoaged in natural surface waters followed the order of sea water > lake water > river water. The abundant cations (e.g., Ca2+ and Mg2+) in sea water facilitated the covalent grafting (S-C bonds) of more dissolved organic matter (DOM) on MoS2 via charge screening and cation bridging, thus inducing stronger electrostatic repulsion and steric effect to stabilize nanosheets. The crucial role of the covalent grafting of DOM was further confirmed by the positive correlation between the critical coagulation concentration values and S-C ratios (R2 = 0.82, p < 0.05). Our results highlighted the dominant role of water chemistry than light irradiation in dictating the colloidal stability of MoS2 photoaged in natural surface waters, which provided new insight into the environmental behavior of MoS2 in aquatic environment.

A Meta-Analysis to Revisit the Property-Aggregation Relationships of Carbon Nanomaterials: Experimental Observations versus Predictions of the DLVO Theory

Contradicting relationships between physicochemical properties of nanomaterials (e.g., size and ζ-potential) and their aggregation behavior have been constantly reported in previous literature, and such contradictions deviate from the predictions of the classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. To resolve such controversies, in this work, we employed a meta-analytic approach to synthesize the data from 46 individual studies reporting the critical coagulation concentration (CCC) of two carbon nanomaterials, namely, graphene oxide (GO) and carbon nanotube (CNT). The correlations between CCC and material physicochemical properties (i.e., size, ζ-potential, and surface functionalities) were examined and compared to the theoretical predictions. Results showed that the CCC of electrostatically stabilized carbon nanomaterials increased with decreasing nanomaterial size when their hydrodynamic sizes were smaller than ca. 200 nm. This is qualitatively consistent with the prediction of the DLVO theory but with a smaller threshold size than the predicted 2 μm. Above the threshold size, the material ζ-potential can be correlated to CCC for nanomaterials with moderate/low surface charge, in agreement with the DLVO theory. The correlation was not observed for highly charged nanomaterials because of their underestimated surface potential by the ζ-potential. Furthermore, a correlation between the C/O ratio and CCC was observed, where a lower C/O ratio resulted in a higher CCC. Overall, our findings rationalized the inconsistency between experimental observation and theoretical prediction and provided essential insights into the aggregation behavior of nanomaterials in water, which could facilitate their rational design.

Identifying the Stripping of Oxide Debris from Graphene Oxide: Evidence from Experimental Analysis and Molecular Simulation

In this study, characteristics of oxidation debris (OD) and its stripping mechanism from graphene oxide (GO) were explored. The results demonstrated that OD contains three components, namely, protein-, fulvic acid-, and humic acid-like substances; among these, protein-like substances with lower molecular weight and higher hydrophilicity were most liable to be stripped from GO and were the primary components stripped from GO at pH < 10, whereas humic acid- and fulvic acid-like substances were stripped from GO at pH > 10. During the stripping of OD, hydrogen bonds from carboxyl and carbonyl were the first to break, followed by hydrogen bonds from epoxy. Subsequently, π-π interactions were broken, and hydrogen bond interactions induced by hydroxyl groups were the hardest to break. After the stripping of OD, the recombination of OD on GO was observed, and regions containing relatively fewer oxygen-containing functional groups were favorable binding sites for the readsorbed OD. The stripping and recombination of OD on GO resulted in an uneven GO surface, which should be considered during the development of GO-based environmental materials and the evaluation of their environmental behavior.

Size effect of graphene oxide from quantum dot to nanoflake on the mobility of nanoplastics in seawater-saturated sand

Marine sedimentary environment serves as an important sink of terrigenous nanoplastics (NP) and graphene oxides (GO). In this study, we discovered that GO of varying sizes exhibited distinct binding modes with 200 nm NP in 35 practical salinity unit (PSU) seawater, resulting in varying impacts on the mobility of NP in porous media. GO-8, with a size of 8±2 nm, firmly adhered to the surface of NP and formed stable primary heterogeneous aggregates, which promoted NP mobility and increased the mass recovery of effluent (Meff) from 24.74% to 31.08%. GO-250 (246±10 nm) partly enveloped NP and only slightly increased the volume of heteroaggregates, which had minimal effect on NP transport. Conversely, GO-850 (855±55 nm) wrapped numerous NP particles to form large secondary heteroaggregates that clung to sand surfaces, providing additional attachment sites for NP, resulting in complete inhibition of NP mobility in porous media (Meff = 0%). In brackish water with 3.5 PSU, all GO-8, GO-250 and GO-850 achieved enhanced mobility of NP, with Meff increasing from 50.35% to 85.62%, 69.45% and 75.41%, respectively. The results indicate that GO size effects on NP mobility are also salinity-dependent.

Long-Term Exposure of Graphene Oxide Suspension to Air Leading to Spontaneous Radical-Driven Degradation

Understanding the environmental transformation and fate of graphene oxide (GO) is critical to estimate its engineering applications and ecological risks. While there have been numerous investigations on the physicochemical stability of GO in prolonged air-exposed solution, the potential generation of reactive radicals and their impact on the structure of GO remain unexplored. In this study, using liquid-PeakForce-mode atomic force microscopy and quadrupole time-of-flight mass spectroscopy, we report that prolonged exposure of GO to the solution leads to the generation of nanopores in the 2D network and may even cause the disintegration of its bulk structure into fragment molecules. These fragments can assemble themselves into films with the same height as the GO at the interface. Further mediated electrochemical analysis supports that the electron-donating active components of GO facilitate the conversion of O2 to •O2- radicals on the GO surface, which are subsequently converted to H2O2, ultimately leading to the formation of •OH. We experimentally confirmed that attacks from •OH radicals can break down the C-C bond network of GO, resulting in the degradation of GO into small fragment molecules. Our findings suggest that GO can exhibit chemical instability when released into aqueous solutions for prolonged periods of time, undergoing transformation into fragment molecules through self-generated •OH radicals. This finding not only sheds light on the distinctive fate of GO-based nanomaterials but also offers a guideline for their engineering applications as advanced materials.

Influence of fulvic acid sub-fractions on aggregation kinetics of graphene oxide in aqueous environments

Fulvic acid (FA) can affect the dispersion of graphene oxide (GO) in aquatic environments, however, the possible mechanisms remain unclear. Dynamic light scattering techniques combined with a multiple regression model were applied to explore the influence of FA sub-fractions (FA_pH3 - FA_pH13) on the aggregation kinetics of GO in aqueous environments. The ratios of critical coagulation concentration (CCC) values were CCC_Na: CCC_Mg: CCC_La: CCC_Ce = 1:2^-5.15:3^-7.31:3^-7.35, which were consistent with the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and Schulze-Hardy rules. The GO remained stable at pH 3-10 and aggregated at pH < 3 or pH > 10, and its critical coagulation pH values were 1.44 and 12.25 with 10 mM NaCl as background. The CCC values of GO in the presence of FA_pH3 - FA_pH13 were greater than those in the absence of FA sub-fractions. The ratios of CCC values of GO (r) increased in the presence of FA sub-fractions in the order of FA_pH13 > FA_pH9 > FA_pH7 > FA_pH5 > FA_pH3 and ranged from 1.01 to 2.15 for certain metal ions including Na⁺, Mg²⁺, La³⁺, and Ce³⁺. The CCC values of GO were significantly related to C, H, O, N, S, H/C, O/C, carboxylic C, and carbonyl C of FA sub-fractions (P < 0.05), respectively, and could be predicted using the multiple linear regression eq. CCC = Z^-n (98.959- 60.911 ∗ O/C + 4.799 ∗ O-alkyl C - 0.845 ∗ aromatic C - 6.237 ∗ carbonyl C). The predicted CCC values for GO were within 90 % prediction intervals, and the average error of the CCC values was 3.3 % and R² = 0.986. This investigation is expected to provide a scientific basis for the transport and ecotoxicity of GO in environments.

Influences of protein-corona on stability and aggregation kinetics of Ti3C2Tx nanosheets in aquatic environment

Proteins existed in aquatic environments strongly influence the transport, fate of nanomaterials due to the formation of protein-corona surrounding nanomaterials. To date, how do proteins affect the aggregation behaviors of MXene, a new family of two-dimensional materials, in aquatic environment remains unknown. Here the aggregation kinetics of MXene Ti₃C₂T_x nanosheets in various electrolytes (NaCl, CaCl₂ and Na₂SO₄) was investigated by time-resolved dynamic light scattering in absence or presence of bovine serum albumin (BSA). Results showed that BSA affected the aggregation of Ti₃C₂T_x in a concentration-dependent manner. Addition of 3 mg/L BSA decreased the critical coagulation concentrations (CCCs) of Ti₃C₂T_x about 1.6-2.1 times, showing obvious destabilization effect; while BSA greater than 30 mg/L created a high-protein environment covering Ti₃C₂T_x, producing high spatial repulsion and enhancing the dispersibility of Ti₃C₂T_x. Ca²⁺ ions have greater effect on the aggregation of Ti₃C₂T_x due to the larger surface charge and bridging effect. The interaction between Ti₃C₂T_x and BSA followed Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, and mainly attributed to hydrogen bonding and van der Waals forces, while positively charged lysine and arginine in BSA might attract onto Ti₃C₂T_x through electrostatic attraction. The interaction decreased the content of α-helix structure in BSA from 74.7% to 53.1%. Ti₃C₂T_x easily suffered from aggregation and their long-distance transport seemed impossible in synthetic or natural waters. The present findings provided new insights for understanding the transfer and fate of this nanomaterial in aquatic environments.

The fate of aggregated graphene oxide upon the increasing of pH: An experimental and molecular dynamic study

Given the possible ecological dangers of graphene oxide (GO), a thorough understanding of its aggregation behavior is essential. During industrial applications, GOs may be used as multi-layered, and there is some possibility that GOs are released into the water environment in the aggregated state. Thus, elucidating the fate of aggregated GO is valuable for evaluating their environmental fate. In this work, the effect of pH on the fate of aggregated graphene oxide (GO) was explored using experimental measurements and molecular dynamic simulations and promoted aggregation of GO upon the increase of pH was observed. Additional investigations show that the presence of oxidation debris (ODs) on GO served as the primary driver of the unanticipated trend in aggregation behavior. GO consists of lightly oxidized functionalized graphene sheets and highly oxidized ODs. Upon the increase of pH and the deprotonation of functional groups, ODs are stripped from GO due to electrostatic repulsions and steric hindrance of water molecules. The stripping of ODs decreased the zeta potential and increased the hydrophobicity of GO, thus accelerating the aggregation. Additionally, the stripped ODs may recombine to GO edges and bridged GOs, which also contribute to further aggregation. Functional group deprotonation, ODs stripping, OD bridging, double layer compression, and charge neutralization all worked together to promote aggregation, resulting in the formation of FG-water-OD aggregates. Overall, the presence of ODs complicates the structures and properties of GO and should be considered during the development of GO-related nanomaterials and the evaluation of their environmental impact.

Self-Assembly of a Graphene Oxide Liquid Crystal for Water Treatment

Adsorbents, especially those with high removal efficiency, long life, and multi-purpose capabilities, are the most crucial components in an adsorption system. By taking advantage of the liquid-like mobility and crystal-like ordering of liquid crystal materials, a liquid crystal induction method is developed and applied to construct three-dimensional graphene-based adsorbents featuring excellent shape adaptability, a distinctive pore structure, and abundant surface functional groups. When the monoliths are used for water restoration, the large amount of residual oxygen-containing groups is more susceptible to electrophilic attack, thus contributing to cation adsorption (up to 705.4 mg g^-1 for methylene blue), while the connected microvoids between the aligned graphene oxide sheets facilitate mass transfer, e.g., the high adsorption capacity for organic pollutants (196.2 g g^-1 for ethylene glycol) and the high evaporation rate for water (4.01 kg m^-2 h^-1). This work gives a practical method for producing high-performance graphene-based functional materials for those applications that are sensitive to surface and mass transfer properties.

Nanofertilizers: A Smart and Sustainable Attribute to Modern Agriculture

The widespread use of fertilizers is a result of the increased global demand for food. The commonly used chemical fertilizers may increase plant growth and output, but they have deleterious effects on the soil, the environment, and even human health. Therefore, nanofertilizers are one of the most promising solutions or substitutes for conventional fertilizers. These engineered materials are composed of nanoparticles containing macro- and micronutrients that are delivered to the plant rhizosphere in a regulated manner. In nanofertilizers, the essential minerals and nutrients (such as N, P, K, Fe, and Mn) are bonded alone or in combination with nano-dimensional adsorbents. This review discusses the development of nanotechnology-based smart and efficient agriculture using nanofertilizers that have higher nutritional management, owing to their ability to increase the nutrient uptake efficiency. Additionally, the synthesis and mechanism of action of the nanofertilizers are discussed, along with the different types of fertilizers that are currently available. Furthermore, sustainable agriculture can be realised by the targeted delivery and controlled release of nutrients through the application of nanoscale active substances. This paper emphasises the successful development and safe application of nanotechnology in agriculture; however, certain basic concerns and existing gaps in research need to be addressed and resolved.

Dynamic light scattering analysis of size-selected graphene oxide 2D colloids fractioned via liquid crystal phase separation

Exfoliated platelets of graphene oxide (GO) can be considered as polydisperse 2D colloids that form nematic colloidal liquid crystal phases in aqueous suspension even at very low concentrations thanks to their extremely high aspect ratios. However, with the rapidly emerging scientific interest in these GO-based liquid crystals, it became clear that the precise analysis and control of the GO sheet size distribution is essential, both for their scientific understanding and for potential applications, e.g., in optoelectronic devices, nanocomposites, or catalysis. In this work, we show that the mean effective (hydrodynamic) GO platelet width can be determined from the translational diffusion coefficient with depolarized dynamic light scattering by using a model for circular, infinitely thin disks. We further studied the phase separation process of biphasic isotropic-nematic GO dispersions and developed a simple fractionation protocol, which can be used to prepare relatively monodisperse fractions of GO sheets with widths ranging from 2.0-12.4 μm. Overall, we expect that the combined application of these relatively simple fractionation and analysis methods will advance the fabrication of well-defined and size-selected GO-based systems.

The detection and characterization techniques for the interaction between graphene oxide and natural colloids: A review

The high dispersibility of graphene oxide (GO) and the universality of natural colloids (clay minerals, (hydr)oxides of Al, Fe, silica, etc.) make them interact easily. Many kinds of analytical methods have been used to study the interaction between GO and natural colloids. This review provides a comprehensive overview of analytical methods for the detection and quantification of interaction process. We highlighted the influence of the most relevant environmental factors (ionic strength, pH, etc.) on batch experiment, quartz crystal microbalance with dissipation monitoring measurements, and column experiments. Besides, the benefits and drawbacks of spectroscopic, microscopic techniques, theoretical models, calculation and time-resolved dynamic light scattering methods also have discussed in this work. This review can give some guidance to researchers in their selection and combination of the technique for the research of the interaction between GO and natural colloids.

The aggregation behaviour and mechanism of commercial graphene oxide in surface aquatic environments

In this study, we comprehensively and critically discuss the aggregation mechanism of commercial graphene oxide (CGO) in surface aquatic environments. The aggregation kinetics and critical coagulation concentration of CGO were obtained through time-resolved dynamic light scattering and batch techniques over a wide range of water types. By employing transmission electron microscopy and elemental mapping, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy, we studied the effects of cations in natural waters on the microstructure transformation, element content and distribution, and oxygen-containing functional group vibrations of CGO. The aggregation of CGO in natural water is induced mainly by Ca²⁺ by complexing; Na⁺, with a higher concentration, plays a more important role than Mg²⁺ in inducing aggregation via electric double layer suppression. Ca²⁺ mainly interacts with C - COOH, while Mg²⁺ has a greater effect on C - OH. Na⁺ has less effect on the oxygen-containing functional group but decreases the C/O ratio in contrast with Mg²⁺/Ca²⁺/natural water, indicating the different inducing mechanisms. This study looks forward to providing pivotal knowledge to predict the environmental fate of CGO more accurately in natural surface water.

Mechanisms of the Aggregation of Graphene Oxide at High pH: Roles of Oxidation Debris and Metal Adsorption

In this work, aggregation of graphene oxide (GO) in synthetic surface water at high pH was elaborated, and experimental characterizations and molecular dynamics simulations were employed to uncover the mechanisms. According to previous studies, aggregation of GO is supposed to be impossible at high pH considering the deprotonation of functional groups on GO and the increased electrostatic repulsions. However, significant aggregations and a reversed trend in zeta potential at high pH were observed. One of the mechanisms was that the promoted metal adsorption at high pH can offset the negative charges generated by the deprotonation. Additionally, the stripping of oxidation debris (OD) on GO also contributes to the unexpected trend in the aggregation behavior and zeta potential. GO consists of lightly oxidized functionalized graphene (FG) sheets and highly oxidized OD. Upon the increase of pH and the deprotonation of functional groups on FG and OD, OD was stripped from FG, which decreased the electrostatic repulsions between FG sheets and accelerated the aggregation. The stripped ODs may recombine to FG edges and bridged FG sheets, which also contribute to the aggregation. Upon the stripping of OD and microstructure transformation of FG, FG-water-OD aggregates formed. According to this study, the aggregation of GO was accompanied by deprotonation of functional groups, metal adsorption, and surface property transformation triggered by the stripping of ODs and should be considered during the development of GO-related nanomaterials and the evaluation of its environmental impact.

Dependence of Graphene Oxide (GO) Toxicity on Oxidation Level, Elemental Composition, and Size

The mass production of graphene oxide (GO) unavoidably elevates the chance of human exposure, as well as the possibility of release into the environment with high stability, raising public concern as to its potential toxicological risks and the implications for humans and ecosystems. Therefore, a thorough assessment of GO toxicity, including its potential reliance on key physicochemical factors, which is lacking in the literature, is of high significance and importance. In this study, GO toxicity, and its dependence on oxidation level, elemental composition, and size, were comprehensively assessed. A newly established quantitative toxicogenomic-based toxicity testing approach, combined with conventional phenotypic bioassays, were employed. The toxicogenomic assay utilized a GFP-fused yeast reporter library covering key cellular toxicity pathways. The results reveal that, indeed, the elemental composition and size do exert impacts on GO toxicity, while the oxidation level exhibits no significant effects. The UV-treated GO, with significantly higher carbon-carbon groups and carboxyl groups, showed a higher toxicity level, especially in the protein and chemical stress categories. With the decrease in size, the toxicity level of the sonicated GOs tended to increase. It is proposed that the covering and subsequent internalization of GO sheets might be the main mode of action in yeast cells.

New insights into the colloidal stability of graphene oxide in aquatic environment: Interplays of photoaging and proteins

Wide application leads to release of graphene oxide (GO) in aquatic environment, where it is subjected to photoaging and changes in physicochemical properties. As important component of natural organic matters, proteins may greatly affect the aggregation behaviors of photoaged GO. The effects of a typical model protein (bovine serum albumin, BSA) on the colloidal stability of photoaged GO were firstly investigated. Photoaging reduced the lateral size and oxygen-containing groups of GO, while the graphene domains and hydrophobicity increased as a function of irradiation time (0-24 h). Consequently, the photoaged GO became less stable than the pristine one in electrolyte solutions. Adsorption of BSA on the surface of the photoaged GO decreased as well, leading to thinner BSA coating on the photoaged GO. In the solutions with low concentrations of electrolytes, the aggregation rate constants (k) of all the photoaged GO firstly increased to the maximum agglomeration rate constants (k_fast, regime I), maintained at k_fast (regime Ⅱ) and then decreased to zero (regime Ⅲ) as the BSA concentration increased. In both regime I and III, the photoaged GO were less stable at the same BSA concentrations, and the impacts of BSA on the colloidal stability of the photoaged GO were less than the pristine one, which was attributed to the weaker interactions between the photoaged GO and BSA. This study provided new insights into the colloidal stability and fate of GO nanomaterials, which are subjected to extensive light irradiation, in wastewater and protein-rich aquatic environment.

Influence of dissolved black carbon on the aggregation and deposition of polystyrene nanoplastics: Comparison with dissolved humic acid

Dissolved black carbon (DBC), widely found in soil and water environments is likely to affect the transport of nanoplastics in aquatic environments. The aggregation and deposition behaviors of fresh and aged polystyrene nanoplastics (PSs) with and without DBC in NaCl solution were investigated by time-resolved dynamic light scattering (DLS) and quartz crystal microbalance with dissipation monitoring equipment (QCM-D) techniques. The results suggest that DBC can screen the surface charges of PSs by interacting with PSs through hydrogen bonding, hydrophobic interactions and π-π interactions, although they were negatively charged. DBC promoted the aggregation of PSs under relatively low ionic strengths, and it minimally affected the stability of PSs under high ionic strength. Deposition experiments showed that both DBC in salt solution and DBC adsorption on silica surface facilitated the deposition of fresh PSs while HA inhibited both deposition processes. After aging, PSs were more stable, and the effects of DBC and HA were weakened. This study investigated the influence mechanism of DBC on the aggregation and deposition behaviors, which provides new insights into the stability and transport of PSs in complex aquatic environments.

Co-transport of negatively charged nanoparticles in saturated porous media: Impacts of hydrophobicity and surface O-functional groups

Graphene oxide (GO) and polystyrene nanoplastic (PSNP) are typical carbonaceous nanomaterials which likely co-exist in soil and sediment. Here, we describe the transport of GO, irradiation reduced GO (RGO) and PSNP in saturated quartz sand both in single and binary systems. In the single transport system, the materials exhibited mobility in the order of GO > RGO > PSNP, due to increased hydrophobicity and decreased negative surface charges. Nevertheless, the co-transport of (R)GO and PSNP in the binary transport system was much more intricate. In Na⁺ saturated porous media, PSNP preferred to interact with (R)GO relative to the highly negatively charged quartz sand, thus (R)GO carried PSNP to break through the sand column. However, in Ca²⁺ saturated porous media, the transport of both (R)GO and PSNP was depressed, attributed to the particle-collector and particle-particle bridging effects between Ca²⁺ and the metal-complexing moieties of the nanoparticles and sand grains. Moreover, GO influenced the co-transport of PSNP to a larger extent than RGO, especially at relatively high ionic strength, because of the more abundant surface O-functional groups on GO providing more complexion sites with Ca²⁺. These results demonstrated that the transport of negatively charged nanomaterials was greatly related to the hydrophobicity and surface O-functional groups.

Molecular Insight into the Adsorption Thermodynamics and Interfacial Behavior of GOs at the Liquid-Liquid Interface

The adsorption of two-dimensional (2-D) graphene oxide (GO) nanosheets at liquid-liquid interfaces has broad technological implications from functional material preparations to oil-water emulsification. Molecular-level understanding of the adsorption thermodynamics and the interfacial behavior is of great significance. Here, the adsorption free energy of GO nanosheets at the water-cyclohexane system was simulated, in which the effect of oxygen-containing groups and deprotonation has been investigated. It was observed that the neutral GO (GO-COOH) has obvious interfacial activity with a reduction of interfacial tension, while the deprotonated GO (GO-COO^-) shows a weak interface affinity. There exists an optimal oxidization degree that could cause the best interfacial stability, which is attributed to the balance of interfacial hydrophilic-hydrophobic interactions. The interaction arising from water is the main factor determining interfacial activity. The interfacial morphology and dynamics of GO nanosheets have also been simulated, in which an anisotropic 2-D translation and rotation along the interface were revealed. Our simulation results provide new insight into the adsorption mechanism and dynamics behavior of GO at the oil-water interface.

Mn2+ effect on manganese oxides (MnOx) nanoparticles aggregation in solution: Chemical adsorption and cation bridging

Manganese oxides (MnO_x) and Mn²⁺ usually co-exist in the natural environment, as well as in water treatments for Mn²⁺ removal. Therefore, it is necessary to investigate the influence of Mn²⁺ on the stability of MnO_x nanoparticles, as it is vital to their fate and reactivity. In this study, we used the time-resolved dynamic light scattering technique to study the influence of Mn²⁺ on the initial aggregation kinetics of MnO_x nanoparticles. The results show that Mn²⁺ was highly efficient in destabilizing MnO_x nanoparticles. The critical coagulation concentration ratio of Mn²⁺ (0.3 mM) to Na⁺ (30 mM) was 2^-6.64, which is beyond the ratio range indicated by the Schulze-Hardy rule. This is due to the coordination bond formed between Mn²⁺ and the surface O of MnO_x, which could efficiently decrease the negative surface charge of MnO_x. As a result, in the co-presence of Mn²⁺ and Na⁺, a small amount of Mn²⁺ (5 μM) could efficiently neutralize the negative charge of MnO_x, thereby decreasing the amount of Na⁺, which mainly destabilized nanoparticles through electric double-layer compression, required to initiate aggregation. Further, Mn²⁺ behaved as a cation bridge linking both the negatively charged MnO_x and humic acid, thereby increasing the stability of the MnO_x nanoparticles as a result of the steric repulsion of the adsorbed humic acid. The results of this study enhance the understanding of the stability of the MnO_x nanoparticles in the natural environment, as well as in water treatments.

Unveiling the Synergistic Role of Oxygen Functional Groups in the Graphene-Mediated Oxidation of Glutathione

This is the first report of an atomic-scale direct oxidation mechanism of the thiol group in glutathione (GSH) by epoxides on graphene oxide (GO) at room temperature. The proposed reaction mechanism is determined using a coupled experimental and computational approach; active sites for the reaction are determined through examination of GO surface chemistry changes before and after exposure to GSH, and density functional theory (DFT) calculations determine the reaction barriers for the possible GO-GSH reaction schemes. The findings build on the previously established catalytic mechanism of GSH oxidation by graphenic nanocarbon surfaces and importantly identify the direct reaction mechanism which becomes important in low-oxygen environments. Experimental results suggest epoxides as the active sites for the reaction with GSH, which we confirm using DFT calculations of reaction barriers and further identify a synergism between the adjacent epoxide and hydroxyl groups on the GO surface. The direct oxidation mechanism at specific oxygen sites offers insight into controlling GO chemical reactivity through surface chemistry manipulations. This insight is critical for furthering our understanding of GO oxidative stress pathways in cytotoxicity as well as for providing rational material design for GO applications that can leverage this reaction.

Effect of the Albumin Corona on the Toxicity of Combined Graphene Oxide and Cadmium to Daphnia magna and Integration of the Datasets into the NanoCommons Knowledge Base

In this work, we evaluated the effect of protein corona formation on graphene oxide (GO) mixture toxicity testing (i.e., co-exposure) using the Daphnia magna model and assessing acute toxicity determined as immobilisation. Cadmium (Cd2+) and bovine serum albumin (BSA) were selected as co-pollutant and protein model system, respectively. Albumin corona formation on GO dramatically increased its colloidal stability (ca. 60%) and Cd2+ adsorption capacity (ca. 4.5 times) in reconstituted water (Daphnia medium). The acute toxicity values (48 h-EC50) observed were 0.18 mg L-1 for Cd2+-only and 0.29 and 0.61 mg L-1 following co-exposure of Cd2+ with GO and BSA@GO materials, respectively, at a fixed non-toxic concentration of 1.0 mg L-1. After coronation of GO with BSA, a reduction in cadmium toxicity of 110 % and 238% was achieved when compared to bare GO and Cd2+-only, respectively. Integration of datasets associated with graphene-based materials, heavy metals and mixture toxicity is essential to enable re-use of the data and facilitate nanoinformatics approaches for design of safer nanomaterials for water quality monitoring and remediation technologies. Hence, all data from this work were annotated and integrated into the NanoCommons Knowledge Base, connecting the experimental data to nanoinformatics platforms under the FAIR data principles and making them interoperable with similar datasets.

Dispersibility and Photochemical Stability of Delaminated MXene Flakes in Water

The environmental stability of 2D MXene flakes must be systematically studied before their further application. Herein, the colloidal dispersibility and photochemical stability of delaminated Ti₃ C₂ T_x MXene flakes modified with hydrazine (HMH) and KOH and with water as the control (HMH-Ti₃ C₂ , KOH-Ti₃ C₂ , and H₂ O-Ti₃ C₂ , respectively) are experimentally and theoretically studied. Modification greatly increases the dispersibility of Ti₃ C₂ T_x flakes. Their critical coagulation concentrations are 28.7, 106, and 49.1 mm NaCl, and their Hamaker constants are 23.7 × 10^-21 , 19.1 × 10^-21 , and 37.7 × 10^-21 J, respectively; the colloidal interaction follows the classical Derjaguin-Landau-Verwey-Overbeek theory. HMH-Ti₃ C₂ and KOH-Ti₃ C₂ exhibit higher photochemical stability, as indicated by their stronger resistance to oxidation under UV and visible light irradiation. Changes in their physicochemical properties and the generation of reactive oxygen species (ROS) are assayed. Spin-polarized density functional theory calculations and molecular dynamics simulations are used to determine the mechanisms underlying the differences in the photochemical stability of Ti₃ C₂ T_x flakes. K⁺ ions protect the flakes from oxidation by acting as a middle layer to reduce the coupling between Ti³⁺ and ROS, while HMH provides stronger protection by absorbing photoelectrons or reacting with ROS. These findings provide new insight into the environmental transformation and design of functional MXenes.

Organic Functionalized Graphene Oxide Behavior in Water

Surface modified graphene oxide (GO) has received broad interest as a potential platform material for sensors, membranes, and sorbents, among other environmental applications. However, compared to parent (unmodified) GO, there is a dearth of information regarding the behavior of subsequently (secondary) modified GO, other than bulk natural organic matter (NOM) coating(s). Here, we systematically explore the critical role of organic functionalization with respect to GO stability in water. Specifically, we synthesized a matrix of GO-based materials considering a carefully chosen range of bound organic molecules (hydrophobic coatings: propylamine, tert-octylamine, and 1-adamantylamine; hydrophilic coatings: 3-amino-1-propanol and 3-amino-1-adamantanol), so that chemical structures and functional groups could be directly compared. GO (without organic functionalization) with varying oxidation extent(s) was also included for comparison. The material matrix was evaluated for aqueous stability by comparing critical coagulation concentration (CCC) as a function of varied ionic strength and type (NaCl, CaCl₂, MgCl₂, and MgSO₄) at pH 7.0. Without surface derivatization (i.e., pristine GO), increased stability was observed with an increase in the GO oxidation state, which is supported by plate–plate Derjaguin, Landau, Verwey and Overbeek (DLVO) energy interaction analyses. For derivatized GO, we observed that hydrophilic additions (phi-GO) are relatively more stable than hydrophobic organic coated GO (pho-GO). We further explored this by altering a single OH group in the adamantane-x structure (3-amino-1-adamantanol vs. 1-adamantylamine). As expected, Ca²⁺ and monovalent co-ions play an important role in the aggregation of highly oxidized GO (HGO) and phi-GO, while the effects of divalent cations and co-ions were less significant for pho-GO. Taken together, this work provides new insight into the intricate dynamics of GO-based material stability in water as it relates to surface functionalization (surface energies) and ionic conditions including type of co- and counter-ion, valence, and concentration.

Effect of UV radiation on the structure of graphene oxide in water and its impact on cytotoxicity and As(III) adsorption

Graphene oxide (GO) is widely used in different applications, however once released into the environment it can change its structure and affect the transport of important contaminants such as arsenic. In this work we show that UV radiation, even in the range of 28-74 μW/cm² of irradiance up to 120 h of exposure, can induce important changes in the structure of graphene oxide, by eliminating -OH and CO functional groups. This reduction affected the stability of graphene oxide in water by decreasing its zeta potential from -41 to -37 mV at pH=7 with the increase of the exposure time. Our results showed that after 24 and 120 h of UV exposure, As(III) adsorption capacity decreased from 5 mg/g to 4.7 and 3.8 mg/g, respectively, suggesting a lower capacity to transport contaminants with time. Computer modelling showed that even a degraded GO structure can have an interaction energy of 223.84 kJ/mol with H₃AsO_3. Furthermore, we observed that the cytotoxicity of graphene oxide changed after being irradiated at 74 μW/cm² for 120 h, showing 20% more cell viability compared to as-produced GO. Our results stress the importance of considering the microstructural and compositional changes that GO undergoes even under low irradiance and short periods, when studying its fate and behavior in the environment and possible applications in water treatment.

Formation and Transport of Cr(III)-NOM-Fe Colloids upon Reaction of Cr(VI) with NOM-Fe(II) Colloids at Anoxic-Oxic Interfaces

Natural organic matter-iron (NOM-Fe) colloids are ubiquitous at anoxic-oxic interfaces of subsurface environments. Fe(II) or NOM can chemically reduce Cr(VI) to Cr(III), and the formation of Cr(III)-NOM-Fe colloids can control the fate and transport of Cr. We explored the formation and transport of Cr(III)-humic acid (HA)-Fe colloids upon reaction of Cr(VI) with HA-Fe(II) colloids over a range of environmentally relevant conditions. Cr(VI) was completely reduced by HA-Fe(II) complexes under anoxic conditions, and the formation of Cr(III)-HA-Fe colloids depended on HA concentration (or molar C/Fe ratio) and redox conditions. No colloids formed at HA concentrations below 3.5 mg C/L (C/Fe ratio below 1.6), but Cr(III)-HA-Fe colloids formed at higher HA concentrations. In column experiments, Cr(III)-HA-Fe(III) colloids formed under oxic conditions were readily transported through sand-packed porous media. Colloidal stability measurements further suggest that Cr(III)-HA-Fe colloids are highly stable and persist for at least 20 days without substantial change in particle size. This stability is attributed to the enrichment of free HA adsorbed on the Cr(III)-HA-Fe colloid surfaces, intensifying the electrostatic and/or steric repulsion interactions between particles. The new insights provided here are important for evaluating the long-term fate and transport of Cr in organic-rich redox transition zones.

Colloidal Behaviors of Two-Dimensional Titanium Carbide in Natural Surface Waters: The Role of Solution Chemistry

Although two-dimensional titanium carbide (Ti₃C₂T_x MXene) has emerged as a shining star material in various communities, its environmental behaviors and fate remain unknown. Herein, the colloidal properties and stability of Ti₃C₂T_x MXene are explored in aquatic systems for the first time, considering the roles of solution chemistry conditions (e.g., pH, ionic types, and strength). It was found that pH had no effect on the stability of Ti₃C₂T_x in the range of 5.0-11.0, whereas ionic valence and concentrations displayed significant effects on the aggregation behavior of Ti₃C₂T_x. By employing time-resolved dynamic light scattering measurements, the critical coagulation concentration (CCC) value of Ti₃C₂T_x was determined to be 12 mM for NaCl. The divalent cations Ca²⁺ and Mg²⁺ exhibited higher destabilizing capacity to Ti₃C₂T_x, as evidenced by the lower CCC values (0.3 and 0.4 mM for CaCl₂ and MgCl₂, respectively) and faster coagulation rates. Long-term stability studies implied that Ti₃C₂T_x MXene was less likely to be transported over long distances in the synthetic or natural waters. These findings provided significant insights into the fate and transport of Ti₃C₂T_x in the aquatic environment.

Nanoplastics display strong stability in aqueous environments: Insights from aggregation behaviour and theoretical calculations

Nanoplastics are inevitably released into aquatic environments due to their extensive use and the continuous fragmentation of plastics. Therefore, it is imperative to understand the aggregation behaviours that determine the transport and fate of nanoplastics in aquatic environments. In this study, the effects of various metal cations, pH, aging and extracellular polymeric substances (EPS) on the aggregation of polystyrene nanoplastics (nano-PS) in aqueous solutions were systematically evaluated based on aggregation kinetics experiments and Derjaguin-Landau-Verwey-Overbeek (DLVO) theoretical calculation. The concentration, valence and hydration ability of metal cations jointly affected the aggregation of nano-PS. The critical coagulation concentration (CCC) of nano-PS was significantly higher than the ionic strengths in aquatic environments, indicating that the aggregation rate of nano-PS is relatively low in aquatic environments. The results of the aggregation kinetics experiments were consistent with DLVO theory, which showed that the energy barrier of nano-PS was dependent on electrostatic repulsion forces and van der Waals forces, and increased with pH. Nano-PS was artificially aged by UV-H₂O₂, which reduced the hydrophobic nature of the particle surfaces, consequently enhancing the stability of the nanoplastics. EPS (excreted from Chlorella pyrenoidosa) decreased the aggregation rates of nano-PS due to steric effects, which was confirmed by the extend DLVO model. Our results highlight the high stability of nano-PS in aquatic environments, which could help facilitate the evaluation of their environmental impact.

Colloidal properties and stability of UV-transformed graphene oxide in aqueous solutions: The role of disorder degree

Motivated by the use of ultraviolet (UV) radiation in the disinfection processes of drinking and waste water treatment plants, this study explores the colloidal properties and stability of UV irradiated graphene oxide (GO) by using the batch technique and time-resolved dynamic light scattering over a wide range of salt types (NaCl, MgCl₂, and CaCl₂) and ionic strength relevant to engineered and natural systems. The results show that the UV irradiation time has an important impact on the physicochemical properties of GO and consequently on its colloidal properties and stability. The aggregation kinetics, attachment efficiency and critical coagulation concentration (CCC) values of UV irradiated GO are obtained for the first time. By correlating CCC values with physicochemical properties, we find that the disorder degree plays a more important role in colloidal properties and stability of UV irradiated GO than oxygen containing functional groups. The findings are valuable for environmental fate assessments on various families of functionalized GO.

Chemical Aging Changed Aggregation Kinetics and Transport of Biochar Colloids

Little is known about aggregation and transport behaviors of aged biochar colloids in the terrestrial environment. This study investigated aggregation kinetics and transport of biochar colloids from aged (HNO₃ treatment) and pristine pinewood biochars pyrolyzed at 300 and 600 °C (PB300 and PB600) in NaCl and CaCl₂ solutions. In NaCl solutions, critical coagulation concentrations (CCCs) of aged PB300 and PB600 colloids (540 mM and 327 mM) were much greater than the CCCs of pristine biochar colloids (300 mM and 182 mM). This is likely due to substantial increase of negatively charged oxygen-containing functional groups (primarily carboxyl) on aged biochar surfaces. Intriguingly, in CaCl₂ solutions the CCCs of the aged PB300 and PB600 colloids decreased to 25.2 mM and 32.1 mM from 58.6 mM and 41.7 mM for the pristine colloids, respectively. This probably resulted from greater surface charge neutralization and Ca²⁺ bridging for the aged biochar colloids. In salt solutions (e.g., 10 and 50 mM NaCl and 1 and 10 mM CaCl₂), the aged biochar colloids showed higher mobility in porous media than the pristine biochar colloids. This study demonstrated that pristine and aged biochar colloids were stable in the solutions with environmentally relevant ionic strength, and the aging process might substantially increase their mobility in the subsurface.

Fate and Transformation of Graphene Oxide in Estuarine and Marine Waters

The possibility of graphene oxide (GO) exposure to the environment has spurred several studies investigating the fate of this nanoparticle (NP). However, there is currently little or no data on the fate of GO in estuarine and marine waters. This study investigated the aggregation, sedimentation, and transformation of GO in saline waters, considering the roles of salinity (0-50 ‰), light (visible light and solar irradiation), and aging, among others. The attachment efficiency of GO reached unity at 1.33 ‰. The sedimentation rate of GO increased with salinity up to 10 ‰ after which it decreased due to formation of ramified GO agglomerates and media density. On the basis of the sedimentation rate determined at 30 ‰ (0.121 m/d), the residence time of GO agglomerates in the euphotic zone of typical open oceans will exceed 500 days. Aging in the presence of visible light increased the relative abundance of the GO's aromatic (C-C/C=C) fraction, reducing the NP. Reduction of GO in visible light was confirmed via UV-vis and Raman spectroscopic techniques. Reduction of GO was faster under solar irradiation. This study demonstrates that when introduced into saline waters, GO will undergo a range of transformations affecting its fate and potential effects to aquatic organisms.

Elucidating the Role of Sulfide on the Stability of Ferrihydrite Colloids under Anoxic Conditions

While the reaction mechanisms between ferrihydrite and sulfide are well-documented, the role of redox reactions on the particle-particle stability of ferrihydrite colloids is largely overlooked. Such reactions are critical for a number of (bio)geochemical processes governing ferrihydrite-based colloid processing and their associated role in nutrient and contaminant subsurface dynamics. Taking a fundamental colloid chemistry approach, along with a complementary suite of characterization techniques, here, we explore the stability mechanisms of ferrihydrite colloids over a wide range of environmentally relevant sulfide concentrations at pH 6.0. Results show that sulfide lowered the stability of both ferrihydrite colloids in a concentration-dependent fashion. At lower sulfide concentrations (15.6-62.5 μM), ferrihydrite colloids are apparently stable, but their critical coagulation concentration (CCC) in NaCl linearly decreases with increasing sulfide concentration. This is attributed to the formation of negatively charged elemental sulfur (S(0)) nanoparticles on the surfaces of positively charged ferrihydrite, intensifying the electrostatic attractions between oppositely charged regions on adjacent ferrihydrite surfaces. Further increasing sulfide concentration generates more S(0) attaching to the ferrihydrite surface. This results in effective surface charge neutralization and then subsequent charge reversal, leading to extensive aggregation of ferrihydrite (core) colloids. Interestingly, for the ferrihydrite colloids with higher hydrodynamic diameter, aggregation rates linearly decreases with increasing sulfide concentration from 156.3 to 312.5 μM, which is likely due to the formation of substantial amounts of negatively charged S(0) and FeS. Findings highlight the significance of sulfidation products in controlling the stability of ferrihydrite colloids in sulfidic environments.

Aggregation Behavior of Inorganic 2D Nanomaterials Beyond Graphene: Insights from Molecular Modeling and Modified DLVO Theory

We report the comparative aggregation behavior of three emerging inorganic 2D nanomaterials (NMs): MoS₂, WS₂, and h-BN in aquatic media. Their aqueous dispersions were subjected to aggregation under varying concentrations of monovalent (NaCl) and divalent (CaCl₂) electrolytes. Moreover, Suwanee River Natural Organic Matter (SRNOM) has been used to analyze the effect of natural macromolecules on 2D NM aggregation. An increase in electrolyte concentration resulted in electrical double-layer compression of the negatively charged 2D NMs, thus displaying classical Derjaguin-Landau-Verwey-Overbeek (DLVO)-type interaction. The critical coagulation concentrations (CCC) have been estimated as 37, 60, and 19 mM NaCl and 3, 7.2, and 1.3 mM CaCl₂ for MoS₂, WS₂, and h-BN, respectively. Theoretical predictions of CCC by modified DLVO theory have been found comparable to the experimental values when dimensionality of the materials is taken into account and a molecular modeling approach was used for calculating molecular level interaction energies between individual 2D NM nanosheets. Electrostatic repulsion has been found to govern colloidal stability of MoS₂ and WS₂ while the van der Waals attraction has been found to govern that of h-BN. SRNOM stabilizes the 2D NMs significantly possibly by electrosteric repulsion. The presence of SRNOM completely stabilized MoS₂ and WS₂ at both low and high ionic strengths. While h-BN still showed appreciable aggregation in the presence of SRNOM, the aggregation rates were decreased by 2.6- and 3.7-fold at low and high ionic strengths, respectively. Overall, h-BN nanosheets will have higher aggregation potential and thus limited mobility in the natural aquatic environment when compared to MoS₂ and WS₂. These results can also be used to mechanistically explain fate, transport, transformation, organismal uptake, and toxicity of inorganic 2D NMs in the natural ecosystems.

Insights into aggregation and transport of graphene oxide in aqueous and saturated porous media: Complex effects of cations with different molecular weight fractionated natural organic matter

The stability of nanomaterials in aquatic environment is a critical factor that governs their fate and ecotoxicity. Meanwhile, the interaction between nanomaterials and ubiquitous natural organic matter (NOM) is a vital process that influences the transport and biological effects of nanomaterials in the environment. However, impacts of NOM on the aggregation and transport of two-dimensional nanomaterials, especially for the increasingly used graphene oxide (GO), are not well understood. Particularly, there is lack of exploration on potential impacts of the heterogeneous properties of NOM on GO behaviour, especially that induced by the wide molecular weight (MW) span of NOM. In this study, effects of several kinds of well-characterized MW fractionated Suwannee River NOM (M_f-SRNOMs) on the aggregation and transport of GO in aqueous media and saturated porous media were investigated. Our results suggest that the stability and migration capacity of GO under most investigated electrolyte conditions are promoted by all Mf-SRNOMs, and efficiencies of different Mf-SRNOMs are generally positively correlated with their MW. Primarily, mechanisms including MW-dependent steric hindrance and sorption of Mf-SRNOMs onto GO are critical in stabilizing GO, and thus facilitating its transport. However, the stronger sorption of higher Mf-SRNOMs onto the GO basal plane through π-π interaction further facilitated the cation bridging between both ends of Mf-SRNOM and GO, and resulted in heteroaggregation of NOM-GO. Moreover, the weight analysis indicated that despite the fact that high Mf-SRNOMs only occupied a small percentage of pristine-SRNOM, they showed a stronger contribution towards pristine-SRNOM's capacity in stabilizing GO, when compared with that of lower MW counterpart. These findings pointed out that complex effects of the heterogeneities of NOM and cations should be highly relevant when the aggregation and transport behaviour of two-dimensional nanomaterials is investigated, and NOM fractions that are highly aromatic and of a higher MW should receive greater attention.

Interaction of graphene oxide with cell culture medium: Evaluating the fetal bovine serum protein corona formation towards in vitro nanotoxicity assessment and nanobiointeractions

The interaction of single-layer graphene oxide (SLGO) and multi-layered graphene oxide (MLGO) with a cell culture medium (i.e. DMEM) was studied by evaluating fetal bovine serum (FBS) protein corona formation towards in vitro nanotoxicity assessment and nanobiointeractions. SLGO and MLGO exhibited different colloidal behavior in the culture medium, which was visualized by cryogenic transmission electron microscopy in situ analysis. Exploring proteomics and bioinformatics tools, 394 and 290 proteins were identified on the SLGO and MLGO hard corona compositions, respectively. From this amount, 115 proteins were exclusively detected on the SLGO and merely 11 on MLGO. SLGO enriched FBS proteins involved in metabolic processes and signal transduction, while MLGO enriched proteins involved in cellular development/structure, and lipid transport/metabolic processes. Such a distinct corona profile is due to differences on surface chemistry, aggregation behavior and the surface area of GO materials. Hydrophilic interactions were found to play a greater role in protein adsorption by MLGO than SLGO. Our results point out implications for in vitro studies of graphene oxide materials concerning the effective dose delivered to cells and corona bioactivity. Finally, we demonstrated the importance of integrating conventional and modern techniques thoroughly to understand the GO-FBS complexes towards more precise, reliable and advanced in vitro nanotoxicity assessment.

Systematic studies on the binding of metal ions in aggregates of humic acid: Aggregation kinetics, spectroscopic analyses and MD simulations

The binding of metal ions with humic acid (HA) plays an important role in the aggregation of HA and the migration of metal ions in the environments. The effects of common cations (Na⁺, Mg²⁺, Ca²⁺ and Al³⁺) and heavy metal ions (Ag⁺, Cd²⁺, Cu²⁺, Cr³⁺ and Eu³⁺) on the aggregation of HA were investigated systematically by aggregation kinetics, spectroscopic techniques and molecular dynamic (MD) simulations. The critical coagulation concentration (CCC) of mono-, di- and trivalent cations could be predicted by the Schulze-Hardy rule. The aggregation of HA in the presence of Na⁺ and Ag⁺ was mainly due to the reduction of repulsive force and the hydrogen bonds between HA molecules. While the complexation of di- and trivalent cations with carboxylic/phenolic groups, or the cation-π interactions enhanced the intra- or inter-molecular bridges in HA and then contributed greatly to the aggregation of HA. Heavy metal ions could easily pass through the electric double-layer of HA compared with common cations. MD simulations further signified the strong aggregation ability of HA molecules in solutions containing high valence metal ions. These findings are important for understanding not only how the influence of metal ions on the aggregation of HA, but also the conditions which ions more efficient for aggregation.

Formation and stability of NOM-Mn(III) colloids in aquatic environments

Soluble Mn(III) species stabilized by natural organic matter (NOM) plays a crucial role in a number of biogeochemical processes. To date, current understanding of these phenomena has been primarily concerned on the occurrence and chemistry of soluble NOM-Mn(III) complexes; much less is known regarding the formation and stability of NOM-Mn(III) colloids in the environment. This presents a critical knowledge gap with regard to biogeochemical cycling of manganese and associated carbon, and for predicting the fate and transport of colloid-associated contaminants, nutrients, and trace metals. In this work, we have characterized the chemical and physical properties of humic acid based (HA)-Mn(III) colloids formed over a range of environmentally relevant conditions and quantified their subsequent aggregation and stability behaviors. Results show that molar C/Mn ratios and HA types (Aldrich HA (AHA) and Pahokee peat soil HA (PPSHA)) are critical factors influencing HA-Mn(III) colloidal properties. Both the amount and the stability of HA-Mn(III) colloids increased with increasing initial molar C/Mn ratios, regardless of HA type. The correlation between the critical coagulation concentration (CCC) and zeta potential (R² > 0.97) suggests that both Derjaguin-Landau-Verwey-Overbeek (DLVO) type and non-DLVO interactions are responsible for enhanced stability of HA-Mn(III) colloids. For a given C/Mn ratio, PPSHA-Mn(III) colloids are significantly more stable against aggregation than AHA-Mn(III) colloids, which is likely due to stronger electrostatic interactions, hydration interactions, and steric hindrance. Further examination in real-world waters indicates that the HA-Mn(III) colloids are highly stable in surface river water, but become unstable (i.e. extensive aggregation) in solutions representing a groundwater-seawater interaction zone. Overall, this study provides new insights into the formation and stability of NOM-Mn(III) colloids which are critical for understanding Mn-based colloidal behavior(s), and thus Mn cycling processes, in aquatic systems.

Interaction between Al2O3 and different sizes of GO in aqueous environment

Although the aggregation of graphene oxide (GO) has been widely researched, the influence of the GO size on the homoaggregation behavior and its interaction with environmental media are still unexplored. In this work, critical coagulation concentration (CCC) values for GO with different sizes, from micro to nanosheet, were measured with NaCl and CaCl₂ electrolytes, and the results indicated that GO with the largest size presented the smallest CCC value. Aluminum oxide (Al₂O₃) was selected as a natural solid particle representative to mimic the interaction between GO and environmental media. Batch experiments were conducted in solution with different pH and ionic strength. Results indicated that the attachment capacity of large GO onto Al₂O₃ particles was greater than that of small GO. The experimental data were well fitted with Freundlich model. The electrostatic attraction and hydrogen-bonding interaction dominated the interaction process between GO and Al₂O₃. These findings are important for better understanding in the environmental fate and transport of GO.

High-performance photodetector based on hybrid of MoS2 and reduced graphene oxide

2D materials are a promising new class of materials for next generation optoelectronic devices owing to their appealing optical and electrical properties. Pristine molybdenum disulfide (MoS₂) is widely used in next generation photovoltaic and optoelectronic devices, but its low photo-dark current ratio prevents its use in highly efficient photo detection applications. Here, we decorated crumpled reduced graphene oxide (rGO) particles on a large-area vertically aligned MoS₂ flake network to enhance the performance of the MoS₂-based photodetector by forming multiple nanoscale p-n heterojunctions. The rGO/MoS₂ device exhibited a significantly improved photoresponsivity of ∼2.10 A W^-1 along with a good detectivity of ∼5 × 10¹¹ Jones (Jones = cm Hz^1/2/W) compared to that of the pristine MoS₂ photodetector in ambient atmosphere. Moreover, the rGO/MoS₂ photodetector showed a fast response of ∼18 ms with excellent stability and reproducibility in ambient air even after three months. The high performance of the photodetector is attributed to enhanced photoexcited carrier density and suppressed photo generated electron-hole recombination due to the strong local built-in electric field developed at the rGO/MoS₂ interface. Our results showed that integration of rGO with MoS₂ provides an efficient platform for photo detection applications.

Research Progress of Gas Sensor Based on Graphene and Its Derivatives: A Review

Gas sensors are devices that convert a gas volume fraction into electrical signals, and they are widely used in many fields such as environmental monitoring. Graphene is a new type of two-dimensional crystal material that has many excellent properties including large specific surface area, high conductivity, and high Young’s modulus. These features make it ideally suitable for application for gas sensors. In this paper, the main characteristics of gas sensor are firstly introduced, followed by the preparation methods and properties of graphene. In addition, the development process and the state of graphene gas sensors are introduced emphatically in terms of structure and performance of the sensor. The emergence of new candidates including graphene, polymer and metal/metal oxide composite enhances the performance of gas detection significantly. Finally, the clear direction of graphene gas sensors for the future is provided according to the latest research results and trends. It provides direction and ideas for future research.