Synergistic Bacterial Stress Results from Exposure to Nano-Ag and Nano-TiO2 Mixtures under Light in Environmental Media

Exposure modes determined the effects of nanomaterials on antibiotic resistance genes: The different roles of oxidative stress and quorum sensing

The effects of co-occurrent pollutants on antibiotic resistance genes (ARGs) in wastewater treatment plants (WWTPs) have raised attentions. However, how the different realistic exposure scenarios determining the effects of nanomaterials (NMs) on ARGs, was still unknown. Herein, the effects of NMs on ARGs under two realistic scenarios was investigated by short-term and long-term exposure modes. The presence of NMs with two different exposure modes could both promote the dissemination of ARGs, and the results were dose-, type- and duration-dependent. Compared to short-term exposure, the long-term exposure increased the abundances of ARGs with a greater extent except nano-ZnO. The long-term exposure increased the overall abundances of target ARGs by 2.9%-20.4%, while shot-term exposure caused the 3.4%-10.5% increment. The mechanisms of ARGs fates driven by NMs exposure were further investigated from the levels of microbial community shift, intracellular oxidative stress, and gene abundance. The variations of several potential bacterial hosts did not contribute to the difference in the ARGs transmission with different exposure modes because NMs types played more vital roles in the shift of microbial community compared to the exposure modes. For the short-term exposure, NMs were capable of triggering the QS by upregulating relevant genes, and further activated the production of surfactin and increased membrane permeability, resulting in the facilitation of ARGs transfer. However, NMs under long-term exposure scenario preferentially stimulated oxidative stress by generating more ROS, which then enhanced ARGs dissemination. Therefore, the exposure mode of NMs was one of the pivotal factors determining the ARGs fates by different triggering mechanisms. This study highlighted the importance of exposure scenario of co-occurrent pollutants on ARGs spread, which will benefit the comprehensive understanding of the actual environmental fates of ARGs.

Surface Heterogeneity at the Polymer-Food Interface Influences Ag Migration from Plastic Packaging Incorporating Ag-Exchanged Zeolites

Silver-enabled polymers, with their antimicrobial properties, could prolong the shelf life and maintain quality in packaged foods. However, there is limited understanding about how the Ag form in the polymer, food chemistry, and other factors affect the transfer (migration) of Ag from the polymer to the food under the intended conditions of use. In this study, we investigated the release of Ag from polymer composites (PCs) incorporating two different Ag-exchanged zeolites (Ag-Y), which have been explored as potential scaffolds for loading high concentrations of Ag within common polymers. We manufactured two Ag-Y films based on low-density polyethylene (LDPE): one incorporating ionic Ag (Ag+) and one incorporating nanoparticulate Ag (AgNPs), each with similar initial Ag concentrations. Then, we assessed the migration of Ag out of these PCs into food simulants under accelerated room temperature storage conditions. In all simulants investigated, the Ag+-Y/LDPE film exhibited a higher migration of Ag compared to the AgNP-Y/LDPE film, suggesting a lower fraction of readily releasable Ag in the latter material. Total Ag migration from AgNP-Y/LDPE over 10 days at 40 °C was 11.10 ± 2.05 ng cm-2 of packaging surface area in water, 7.63 ± 1.59 ng cm-2 in a 9 wt % aqueous sucrose solution, and 21.29 ± 1.98 ng cm-2 in a commercial sweetened carbonated beverage (Squirt). In contrast, Ag migration from Ag+-Y/LDPE was measured at 49.61 ± 3.46, 57.48 ± 9.65, and 91.54 ± 5.58 ng cm-2 in water, sucrose solution, and Squirt drink, respectively. Surface characterization techniques, including atomic force microscopy (AFM), scanning electron microscopy (SEM), and conductivity measurements, revealed the presence of exposed zeolite particles at the surface of the films, suggesting that direct interactions between Ag-exchanged zeolites and food components at the simulant-polymer interface play an important role in determining Ag migration from Ag-Y/LDPE PCs.

Engineered nanomaterials exert sublethal bacterial stress at very low doses: Effects of concentration, light, and media on cell membrane permeability

Engineered nanomaterials (ENMs) can alter surface properties of cells and disturb cellular functions and gene expression through direct and indirect contact, exerting unintended impacts on human and ecological health. However, the effects of interactions among environmental factors, such as light, surrounding media, and ENM mixtures, on the mechanisms of ENM toxicity, especially at sublethal concentrations, are much less explored and understood. Therefore, we evaluated cell viability and outer membrane permeability of E. coli as a function of exposure to environmentally relevant concentrations of ENMs, including metal (n-Ag) and metal oxide (n-TiO2, n-Al2O3, n-ZnO, n-CuO, and n-SiO2) nanoparticles under dark and simulated sunlight illumination in MOPS, a synthetic buffer, and Lake Michigan Water (LMW), a freshwater medium. We found that light activates the phototoxicity of n-TiO2 and n-Ag by inducing significant increases in bacterial outer membrane permeability at sublethal doses (< 1 mg/L). Other ENMs, including n-ZnO, n-CuO, n-Al2O3, and n-SiO2, have small to minimal impacts. Toxicities of ENMs were greater in LMW than MOPS due to their different ionic strength and chemical composition. Physical and chemical interactions between n-TiO2 and n-Ag lead to amplified toxic effects of the ENM mixtures that are greater than the additive effects of individual ENMs acting alone. Our results revealed the significant sublethal bacterial stress exerted by ENMs and ENM mixtures at the cell surface in natural environments at low doses, which can potentially lead to further cellular damage and eventually impact overall ecological health.

Dissolution kinetics of copper oxide nanoparticles in presence of glyphosate

Recently CuO nanoparticles (n-CuO) have been proposed as an alternative method to deliver a Cu-based pesticide for controlling fungal infestations. With the concomitant use of glyphosate as an herbicide, the interactions between n-CuO and this strong ligand need to be assessed. We investigated the dissolution kinetics of n-CuO and bulk-CuO (b-CuO) particles in the presence of a commercial glyphosate product and compared it to oxalate, a natural ligand present in soil water. We performed experiments at concentration levels representative of the conditions under which n-CuO and glyphosate would be used (∼0.9 mg/L n-CuO and 50 μM of glyphosate). As tenorite (CuO) dissolution kinetics are known to be surface controlled, we determined that at pH 6.5, T ∼ 20 °C, using KNO3 as background electrolyte, the presence of glyphosate leads to a dissolution rate of 9.3 ± 0.7 ×10-3 h-1. In contrast, in absence of glyphosate, and under the same conditions, it is 2 orders of magnitude less: 8.9 ± 3.6 ×10-5 h-1. In a more complex multi-electrolyte aqueous solution the same effect is observed; glyphosate promotes the dissolution rates of n-CuO and b-CuO within the first 10 h of reaction by a factor of ∼2 to ∼15. In the simple KNO3 electrolyte, oxalate leads to dissolution rates of CuO about two times faster than glyphosate. However, the kinetic rates within the first 10 h of reaction are about the same for the two ligands when the reaction takes place in the multi-electrolyte solution as oxalate is mostly bound to Ca2+ and Mg2+.

Plasmon-Sensitized Silica-Titanium Aerogels as Potential Photocatalysts for Organic Pollutants and Bacterial Strains

Photocatalysis reactions are of great interest as an effective tool against the profusely increasing population of antibiotic-resistant bacteria species. In particular, the promising evidence on plasmon-sensitized titanium dioxide (TiO2) photocatalysis inspired us to investigate their antibacterial activity stemming from the photogenerated reactive oxygen species (ROS). Herein, TiO2 nanostructures were grown in situ within a silica (SiO2) aerogel matrix with high surface area and porosity, and their ROS-related phototoxic effects against Escherichia coli bacteria were investigated under solar- and visible-light irradiations. Photodegradation profiles obtained from Rhodamine B (RhB) organic dye used as a chemical probe proved that the types of ROS produced by SiO2/TiO2 aerogels varied depending on the electromagnetic spectrum portion that was used during material irradiation. Further, the SiO2/TiO2 aerogel matrix was decorated with silver-gold nanostars (Ag@Au NSs) to enhance its photocatalytic efficiency under visible light irradiations. Our design showed that plasmon-enriched composite aerogels efficiently boosted ROS production under visible light exposures and that the structures containing Ag@Au NSs showed a much more effective antibacterial effect compared to their counterparts.

Mechanistic insight into humic acid-enhanced sonophotocatalytic removal of 17β-estradiol: Formation and contribution of reactive intermediates

In this study, humic acid (HA) enhanced 17β-estradiol (17β-E2) degradation by Er3+-CdS/MoS2 (ECMS) was investigated under ultrasonic and light conditions. The degradation reaction rate of 17β-E2 was increased from (14.414 ± 0.315) × 10-3 min-1 to (122.677 ± 1.729) × 10-3 min-1 within 90 min sonophotocatalytic (SPC) reaction with the addition of HA. The results of quenching coupled with chemical probe experiments indicated that more reactive intermediates (RIs) including reactive oxygen species (ROSs) and triplet-excited states were generated in the HA-enhanced sonophotocatalytic system. The triplet-excited states of humic acid (3HA*), hydroxyl radical (•OH), and superoxide radical (•O2-) were the dominant RIs for 17β-E2 elimination. In addition, the energy- and electron-transfer process via coexisting HA also account for 12.86% and 29.24% contributions, respectively. The quantum yields of RIs in the SPC-ECMS-HA system followed the order of 3HA* > H2O2 > 1O2 > •O2-> •OH. Moreover, the spectral and fluorescence characteristics of HA were further analyzed during the sonophotocatalytic reaction process. The study expanded new insights into the comprehension of the effects of omnipresent coexisting HA and RIs formation for the removal of 17β-E2 during the sonophotocatalytic process.

Creating anti-viral high-touch surfaces using photocatalytic transparent films

Antimicrobial and self-cleaning surface coatings are promising tools to combat the growing global threat of infectious diseases and related healthcare-associated infections (HAIs). Although many engineered TiO₂-based coating technologies are reporting antibacterial performance, the antiviral performance of these coatings has not been explored. Furthermore, previous studies have underscored the importance of the "transparency" of the coating for surfaces such as the touch screens of medical devices. Hence, in this study, we fabricated a variety of nanoscale TiO₂-based transparent thin films (anatase TiO₂, anatase/rutile mixed phase TiO₂, silver-anatase TiO₂ composite, and carbon nanotube-anatase TiO₂ composite) via dipping and airbrush spray coating technologies and evaluated their antiviral performance (Bacteriophage MS2 as the model) under dark and illuminated conditions. The thin films showed high surface coverage (ranging from 40 to 85%), low surface roughness (maximum average roughness 70 nm), super-hydrophilicity (water contact angle 6-38.4°), and high transparency (70-80% transmittance under visible light). Antiviral performance of the coatings revealed that silver-anatase TiO₂ composite (nAg/nTiO₂) coated samples achieved the highest antiviral efficacy (5-6 log reduction) while the other TiO₂ coated samples showed fair antiviral results (1.5-3.5 log reduction) after 90 min LED irradiation at 365 nm. Those findings indicate that TiO₂-based composite coatings are effective in creating antiviral high-touch surfaces with the potential to control infectious diseases and HAIs.

Hydrothermally synthesized Ag-TiO2 nanofibers (NFs) for photocatalytic dye degradation and antibacterial activity

This work successfully utilised eco-friendly green synthesis to produce Ag-TiO₂ nanofibers (NFs). As pollution and energy limitations have become global issues, there is an ongoing need to develop more effective catalysts through straightforward and environmentally friendly methods. The Ag-TiO₂ nanofibers (NFs) XRD pattern exhibits an anatase TiO₂ and FCC crystal structure of Ag nanoparticles. The SEM investigation revealed a nanofiber-like surface morphology. The Ag-TiO₂ nanofibers (NFs) exhibits an optical band gap energy is 2.5 eV. Methylene blue (MB), malachite green (MG), Congo red (CR), and crystal violet (CV) dye aqueous solutions were used to evaluate the photocatalytic performance of the synthesized Ag-modified TiO₂ nanofibers (NFs) under direct sunlight irradiation. The effects of catalyst size on the efficient breakdown of MB dye were also investigated. The optimum catalyst concentration was found to be at 0.02 mg/mL. At 120 min of direct sunlight, the highest photosynthetic degradation efficiency (DE percentage) of 94% was achieved for MB dye. Ag-TiO₂ nanofibers (NFs) have been demonstrated to have exceptional antibacterial activity against Gram-positive bacteria such as Staphylococcus aureus and Gram-negative bacteria E-Coli. Because of these great qualities, it seems likely that the Ag-TiO₂ nanofibers (NFs) made could be a great photocatalyst for getting dye pollutants out of wastewater.

Analytical methods for assessing antimicrobial activity of nanomaterials in complex media: advances, challenges, and perspectives

Assessing the antimicrobial activity of engineered nanomaterials (ENMs), especially in realistic scenarios, is of great significance for both basic research and applications. Multiple analytical methods are available for analysis via off-line or on-line measurements. Real-world samples are often complex with inorganic and organic components, which complicates the measurements of microbial viability and/or metabolic activity. This article highlights the recent advances achieved in analytical methods including typical applications and specifics regarding their accuracy, cost, efficiency, and user-friendliness. Methodological drawbacks, technique gaps, and future perspectives are also discussed. This review aims to help researchers select suitable methods for gaining insight into antimicrobial activities of targeted ENMs in artificial and natural complex matrices.

Toxicokinetics and Particle Number-Based Trophic Transfer of a Metallic Nanoparticle Mixture in a Terrestrial Food Chain

Herein, we investigated to which extent metallic nanoparticles (MNPs) affect the trophic transfer of other coexisting MNPs from lettuce to terrestrial snails and the associated tissue-specific distribution using toxicokinetic (TK) modeling and single-particle inductively coupled plasma mass spectrometry. During a period of 22 days, snails were fed with lettuce leaves that were root exposed to AgNO3 (0.05 mg/L), AgNPs (0.75 mg/L), TiO2NPs (200 mg/L), and a mixture of AgNPs and TiO2NPs (equivalent doses as for single NPs). The uptake rate constants (ku) were 0.08 and 0.11 kg leaves/kg snail/d for Ag and 1.63 and 1.79 kg leaves/kg snail/d for Ti in snails fed with NPs single- and mixture-exposed lettuce, respectively. The elimination rate constants (ke) of Ag in snails exposed to single AgNPs and mixed AgNPs were comparable to the corresponding ku, while the ke for Ti were lower than the corresponding ku. As a result, single TiO2NP treatments as well as exposure to mixtures containing TiO2NPs induced significant biomagnification from lettuce to snails with kinetic trophic transfer factors (TTFk) of 7.99 and 6.46. The TTFk of Ag in the single AgNPs treatment (1.15 kg leaves/kg snail) was significantly greater than the TTFk in the mixture treatment (0.85 kg leaves/kg snail), while the fraction of Ag remaining in the body of snails after AgNPs exposure (36%) was lower than the Ag fraction remaining after mixture exposure (50%). These results indicated that the presence of TiO2NPs inhibited the trophic transfer of AgNPs from lettuce to snails but enhanced the retention of AgNPs in snails. Biomagnification of AgNPs from lettuce to snails was observed in an AgNPs single treatment using AgNPs number as the dose metric, which was reflected by the particle number-based TTFs of AgNPs in snails (1.67, i.e., higher than 1). The size distribution of AgNPs was shifted across the lettuce-snail food chain. By making use of particle-specific measurements and fitting TK processes, this research provides important implications for potential risks associated with the trophic transfer of MNP mixtures.

Nanoparticles and antibiotics stress proliferated antibiotic resistance genes in microalgae-bacteria symbiotic systems

The comprehensive effect of exogenous pollutants on the dispersal and abundance of antibiotic-resistance genes (ARGs) in the phycosphere, bacterial community and algae-bacteria interaction remains poorly understood. We investigated community structure and abundance of ARGs in free-living (FL) and particle-attached (PA) bacteria in the phycosphere under nanoparticles (silver nanoparticles (AgNPs) and hematite nanoparticles (HemNPs)) and antibiotics (tetracycline and sulfadiazine) stress using high-throughput sequencing and real-time quantitative PCR. Meanwhile, the intrinsic connection of algae-bacteria interaction was explored by transcriptome and metabolome. The results showed that the relative abundance of sulfonamide and tetracycline ARGs in PA and FL bacteria increased 103-129 % and 112-134 %, respectively, under combined stress of nanoparticles and antibiotics. Antibiotics have a greater effect on ARGs than nanoparticles at environmentally relevant concentrations. Proteobacteria, Firmicutes, and Bacteroidetes, as the primary potential hosts of ARGs, were the dominant phyla. Lifestyle, i.e., PA and FL, significantly determined the abundance of ARGs and bacterial communities. Moreover, algae can provide bacteria with nutrients (carbohydrates and amino acids), and can also produce antibacterial substances (fatty acids). This algal-bacterial interaction may indirectly affect the distribution and abundance of ARGs. These findings provide new insights into the distribution and dispersal of ARGs in microalgae-bacteria symbiotic systems.

Review and Prospects on the Ecotoxicity of Mixtures of Nanoparticles and Hybrid Nanomaterials

The rapid development of nanomaterials (NMs) and the emergence of new multicomponent NMs will inevitably lead to simultaneous exposure of organisms to multiple engineered nanoparticles (ENPs) at varying exposure levels. Understanding the joint impacts of multiple ENPs and predicting the toxicity of mixtures of ENPs are therefore evidently of importance. We reviewed the toxicity of mixtures of ENPs to a variety of different species, covering algae, bacteria, daphnia, fish, fungi, insects, and plants. Most studies used the independent-action (IA)-based model to assess the type of joint effects. Using co-occurrence networks, it was revealed that 53% of the cases with specific joint response showed antagonistic, 25% synergistic, and 22% additive effects. The combination of nCuO and nZnO exhibited the strongest interactions in each type of joint interaction. Compared with other species, plants exposed to multiple ENPs were more likely to experience antagonistic effects. The main factors influencing the joint response type of the mixtures were (1) the chemical composition of individual components in mixtures, (2) the stability of suspensions of mixed ENPs, (3) the type and trophic level of the individual organisms tested, (4) the biological level of organization (population, communities, ecosystems), (5) the exposure concentrations and time, (6) the endpoint of toxicity, and (7) the abiotic field conditions (e.g., pH, ionic strength, natural organic matter). This knowledge is critical in developing efficient strategies for the assessment of the hazards induced by combined exposure to multiple ENPs in complex environments. In addition, this knowledge of the joint effects of multiple ENPs assists in the effective prediction of hybrid NMs.

Metal and Metal Oxide Nanomaterials for Fighting Planktonic Bacteria and Biofilms: A Review Emphasizing on Mechanistic Aspects

The misuse and mismanagement of antibiotics have made the treatment of bacterial infections a challenge. This challenge is magnified when bacteria form biofilms, which can increase bacterial resistance up to 1000 times. It is desirable to develop anti-infective materials with antibacterial activity and no resistance to drugs. With the rapid development of nanotechnology, anti-infective strategies based on metal and metal oxide nanomaterials have been widely used in antibacterial and antibiofilm treatments. Here, this review expounds on the state-of-the-art applications of metal and metal oxide nanomaterials in bacterial infective diseases. A specific attention is given to the antibacterial mechanisms of metal and metal oxide nanomaterials, including disrupting cell membranes, damaging proteins, and nucleic acid. Moreover, a practical antibiofilm mechanism employing these metal and metal oxide nanomaterials is also introduced based on the composition of biofilm, including extracellular polymeric substance, quorum sensing, and bacteria. Finally, current challenges and future perspectives of metal and metal oxide nanomaterials in the anti-infective field are presented to facilitate their development and use.

Effects of natural organic matter on the joint toxicity and accumulation of Cu nanoparticles and ZnO nanoparticles in Daphnia magna

Various modern products have metallic nanoparticles (MNPs) embedded to enhance products performance. Technological advances enable nowadays even multiple hybrid nanoparticles. Consequently, the future co-release of multiple MNPs will inevitably result in the presence of MNP mixtures in the environment. An important question is if the responses of mixtures of MNPs can be dealt with in a similar way as with the responses of biota to mixtures of metal salts. Moreover, natural organic matter (NOM) is an important parameter affecting the behavior and effect of MNPs. Herein, we determined the joint toxicity and accumulation of copper nanoparticles (CuNPs) and zinc oxide nanoparticles (ZnONPs) in Daphnia magna in the absence and presence of Suwannee River natural organic matter (SR-NOM), compared to the joint toxicity and accumulation of corresponding metal salts. The results of toxicity testing showed that the joint toxicity of CuNPs + ZnONPs was greater than the single toxicity of CuNPs or ZnONPs. The joint toxic action of CuNPs + ZnONPs was additive or more-than-additive for D. magna. A similar pattern was found in the toxicity of the mixtures of Cu- and Zn-salts from the literature data. The presence of SR-NOM had no significant impact on the joint toxicity of CuNPs + ZnONPs. The calculated component-specific contribution to overall toxicity indicated that SR-NOM increased the relative contribution of dissolved ions released from the MNPs to the toxicity of the binary mixtures at high-effect concentrations of individual MNPs. Moreover, dissolved Zn-ions released from the ZnONPs were found to dominate the joint toxicity of CuNPs + ZnONPs in the presence of SR-NOM. Furthermore, the results of the accumulation experiment displayed that the presence of SR-NOM significantly enhanced the accumulation of either CuNPs or ZnONPs in D. magna exposed to the MNP mixtures.

The synergistic effect of enhanced photocatalytic activity and photothermal effect of oxygen-deficient Ni/reduced graphene oxide nanocomposite for rapid disinfection under near-infrared irradiation

The rational design of high antibacterial efficiency are urgently needed as the occurrence of drug-resistance issues. Hence, Ni/reduced graphene oxide nanocomposite (Ni/rGO) with different amounts of oxygen vacancies were fabricated for efficient disinfection. The optimized Ni/rGO (A100) exhibited highly effective inactivation efficacy of 99.6% and 99.5% against Escherichia coli and Bacillus subtilis within 8 min near-infrared (NIR) irradiation through the synergistic effects of photothermal therapy and oxidative damage, which were much higher than single treatment. The A100 nanocomposite achieved an extraordinary photothermal conversion efficiency (35.78%) under the 808 nm irradiation for enhanced photothermal hyperthermia, thereby destroying the cell membrane and accelerating the GSH depletion. The radical scavenger experiment confirmed that •O₂^- and •OH play the chief role in photodisinfection reaction. Besides, A100 could exert significant damage on the ATP synthesis. The excellent photothermal performance and photocatalytic activity can be attributed to the appropriate oxygen vacancy density, which improves the absorption of NIR light and facilitates the separation of photogenerated electron-hole pairs. Besides, the higher NiO content of A100 contributed to improving the photocatalytic effect. Our work demonstrated a promising strategy for efficient water pollution purification caused by pathogenic bacteria.

The impacts of metal-based engineered nanomaterial mixtures on microbial systems: A review

The last decade has witnessed tremendous growth in the commercial use of metal-based engineered nanomaterials (ENMs) for a wide range of products and processes. Consequently, direct and indirect release into environmental systems may no longer be considered negligible or insignificant. Yet, there is an active debate as to whether there are real risks to human or ecological health with environmental exposure to ENMs. Previous research has focused primarily on the acute effects of individual ENMs using pure cultures under controlled laboratory environments, which may not accurately reveal the ecological impacts of ENMs under real environmental conditions. The goal of this review is to assess our current understanding of ENM effects as we move from exposure of single to multiple ENMs or microbial species. For instance, are ENMs' impacts on microbial communities predicted by their intrinsic physical or chemical characteristics or their effects on single microbial populations; how do chronic ENM interactions compare to acute toxicity; does behavior under simplified laboratory conditions reflect that in environmental media; finally, is biological stress modified by interactions in ENM mixtures relative to that of individual ENM? This review summarizes key findings and our evolving understanding of the ecological effects of ENMs under complex environmental conditions on microbial systems, identifies the gaps in our current knowledge, and indicates the direction of future research.

Titanium dioxide nanoparticles affect the toxicity of silver nanoparticles in common carp (Cyprinus carpio)

The present study assessed the individual and combined toxicity effects of Ag- and TiO₂- nanoparticles (NPs) on Ag bioaccumulation, oxidative stress, and gill histopathology in common carp as an aquatic animal model. The 96-h acute toxicity tests showed that TiO₂NPs enhanced the toxicity of AgNPs deducted from the decreased LC₅₀ in co-exposure to these NPs. Chronic toxicity tests included a 10-day exposure and a 10-day recovery period. In most cases, histological damages were more severe in co-exposure to Ag- and TiO₂- NPs compared with the individual AgNPs however, they were reduced in some cases and also after the recovery period. In co-exposure to Ag- and TiO₂- NPs, the Ag bioaccumulation was decreased in the gills but increased in the liver and intestine compared with the singular exposure. After the recovery period, Ag bioaccumulation decreased especially in the liver. Decreased levels of antioxidant enzymes were observed in the AgNPs exposed groups, which were partially alleviated by TiO₂NPs. The reduction of condition factor (CF) and hepatosomatic index (HSI) and a severe decrease of weight gain (WG) were observed in co-exposure to Ag- and TiO₂- NPs. After the recovery period, the CF and HSI increased but the WG decreased less compared with the exposure period. The present results emphasize the importance of considering the co-existence and interaction of NPs in realizing their bioavailability and toxicity in aquatic environments.

Acute toxicity evaluation of nanoparticles mixtures using luminescent bacteria

As the application of nanoparticles (NPs) and their release to the environment has increased, it is important to verify their toxicity, with a special emphasis on particle solubilization and the interaction of NP mixtures. In the current study, a model luminescent bacteria, Vibrio fischeri, was employed to test the acute toxicity of individual NPs and their binary mixtures, including metal NPs (ZnNPs, CuNPs) and metal oxide NPs (ZnONPs, CuONPs). The independent action model was used to reflect the synergistic, additive, or antagonistic interactions of binary mixtures of these NPs. The results showed that the median effective concentration (EC₅₀) inhibited the luminescence of V. fischeri were 20.5, 4.1, 11.6, and 118.7 mg L^-1 for ZnNPs, CuNPs, ZnONPs, and CuONPs, respectively, suggesting that the toxicity of these NPs to V. fischeri were as the following order: CuNPs > ZnONPs > ZnNPs > CuONPs. The combined effect of NPs were found to be antagonistic for CuNPs-ZnONPs and CuNPs-CuONPs, synergistic for CuONPs-ZnNPs, CuNPs-ZnNPs, and ZnONPs-CuONPs, and additive for ZnNPs-ZnONPs, revealing a complex pattern of possible interactions. The differences of dissolved metal ions partly accounted for the different combined toxicity of binary mixtures of NPs. The findings have important implications for better understanding the true environmental risk of NP mixtures.

Combined Toxicity of Silver Nanoparticles with Hematite or Plastic Nanoparticles toward Two Freshwater Algae

In the natural environment, the interactions of different types of nanoparticles (NPs) may alter their toxicity, thus masking their true environmental effects. This study investigated the toxicity of silver NPs (AgNPs) combined with hematite (HemNPs) or polystyrene (PsNPs) NPs toward the freshwater algae Chlamydomonas reinhardtii and Ochromonas danica. The former has a cell wall and cannot internalize these NPs, while the latter without a cell wall can. Therefore, the toxicity of AgNPs toward C. reinhardtii was attributed to the released Ag ions, while AgNPs had direct toxic effects on O. danica. Moreover, nontoxic HemNPs ameliorated AgNP toxicity toward C. reinhardtii, by decreasing the bioavailability of Ag ions through adsorption. Despite their role as Ag-ion carriers, HemNPs still reduced the toxicity of AgNPs toward O. danica by competitively inhibiting AgNP uptake. In both algae, Ag accumulation fully accounted for the combined toxicity of AgNPs and HemNPs. However, the combined toxicity of AgNPs and PsNPs was complicated by their significant individual toxicities and the synergistic interactions of these particles with the algae, regardless of differences in Ag accumulation. Overall, in environmental assessments, considerations of the combined toxicity of dissimilar NPs will allow more accurate assessments of their environmental risks.

Interactions between silver nanoparticles and other metal nanoparticles under environmentally relevant conditions: A review

Global production of engineered nanoparticles (ENPs) continues to increase due to the demand of enabling properties in consumer products and industrial applications. Release of individual or aggregates of ENPs have been shown to interact with one another subsequently resulting in adverse biological effects. This review focuses on silver nanoparticles (AgNPs), which are currently used in numerous applications, including but not limited to antibacterial action. Consequently, the release of AgNPs into the aquatic environment, the dissociation into ions, the binding to organic matter, reactions with other metal-based materials, and disruption of normal biological and ecological processes at the cellular level are all potential negative effects of AgNPs usage. The potential sources of AgNPs includes leaching of intact particles from consumer products, disposal of waste from industrial processes, intentional release into contaminated waters, and the natural formation of AgNPs in surface and ground water. Formation of natural AgNPs is greatly influenced by different chemical parameters including: pH, oxygen levels, and the presence of organic matter, which results in AgNPs that are stable for several months. Both engineered and natural AgNPs can interact with metal and metal oxide particles/nanoparticles. However, information on the chemical and toxicological interactions between AgNPs and other nanoparticles is limited. We have presented current knowledge on the interactions of AgNPs with gold nanoparticles (AuNPs) and titanium dioxide nanoparticles (TiO₂ NPs). The interaction between AgNPs and AuNPs result in stable bimetallic Ag-Au alloy NPs. Whereas the interaction of AgNPs with TiO₂ NPs under dark and light conditions results in the release of Ag⁺ ions, which may be subsequently converted back into AgNPs and adsorb on TiO₂ NPs. The potential chemical mechanisms and toxic effects of AgNPs with AuNPs and TiO₂ NPs are discussed within this review and show that further investigation is warranted.

Photogenerated Charge Carriers in Molybdenum Disulfide Quantum Dots with Enhanced Antibacterial Activity

Molybdenum disulfide (MoS₂) nanosheets have received considerable interest due to their superior physicochemical performances to graphene nanosheets. As the lateral size and layer thickness decrease, the formed MoS₂ quantum dots (QDs) show more promise as photocatalysts, endowing them with potential antimicrobial properties under environmental conditions. However, studies on the antibacterial photodynamic therapy of MoS₂ QDs have rarely been reported. Here, we show that MoS₂ QDs more effectively promote the creation and separation of electron-hole pair than MoS₂ nanosheets, resulting in the formation of multiple reactive oxygen species (ROS) under simulated solar light irradiation. As a result, photoexcited MoS₂ QDs show remarkably enhanced antibacterial activity, and the ROS-mediated oxidative stress plays a dominant role in the antibacterial mechanism. The in vivo experiments showed that MoS₂ QDs are efficacious in wound healing under simulated solar light irradiation and exert protective effects on normal tissues, suggesting good biocompatibility properties. Our findings provide a full description of the photochemical behavior of MoS₂ QDs and the resulting antibacterial activity, which might advance the development of MoS₂-based nanomaterials as photodynamic antibacterial agents under environmental conditions.

TiO2-based transparent coatings create self-cleaning surfaces

Implementation of self-cleaning surfaces is gaining attention as a tool to combat the healthcare associated infections (HAIs). In this study, we prepared TiO₂-based transparent coatings as one such potential self-cleaning surface for touchscreen application and evaluated their antimicrobial efficacy under dark and illuminated conditions. To maintain high transparency and TiO₂ coverage, clean borosilicate glass slides were dip-coated multiple times in a suspension of TiO₂-based materials at a low concentration. The as-prepared samples were tested for their roughness and hydrophilicity via atomic force microscopy (AFM) and contact angle analysis, respectively. To screen the antimicrobial performance of the TiO₂ coated samples, the number and viability of attached bacteria on the film surfaces were recorded after submerging them in a bacterial suspension for 45 min under dark or ultraviolet (UV) illuminated conditions. The antimicrobial performance of the commercially available regular and Ag-coated antimicrobial Corning^® Gorilla^® Glass were also evaluated under the same conditions and compared with those of the TiO₂ coated samples. Among the test samples, n-Ag/TiO₂ (<100 nm) coated samples achieved greater than 80% bactericidal efficacy with the lowest bacterial attachment after the UV exposure. TiO₂-based transparent coatings show promise as an effective tool against bacterial attachment and displays greater bactericidal activity in comparison to commercial antibacterial glass.