Enhanced Visible-Light-Driven Photocatalytic Bacterial Inactivation by Ultrathin Carbon-Coated Magnetic Cobalt Ferrite Nanoparticles

Designing a photocatalytic and self-renewed g-C3N4 nanosheet/poly-Schiff base composite coating towards long-term biofouling resistance

Inhibiting the adhesion and growth of marine microorganisms through photocatalysis is a potentially efficient and environmentally friendly antifouling strategy. However, the undesired "shading effect" caused by resin coatings and microbial deposition reduces the utilization of the catalysts and leads to a failure in the antifouling active substance on the coating surface. Here, we successfully developed a composite coating (DPC-x) combining g-C3N4 nanosheet (g-C-NS) photocatalysts with degradable green poly-Schiff base resins, which integrates the dual functions of enhanced dynamic self-renewal and photocatalytic antibacterial activities towards long-term anti-biofouling. The controllable and complete degradability of the poly-Schiff base polymer chains and the self-renewal mechanism of the DPC-x coating exposed the internal g-C-NS, which provided a constant stream of photocatalytic reactive interfaces for 100% utilization and release of the photocatalysts. g-C-NS were homogeneously dispersed in the degradable resin coating, significantly enhancing and adjusting the self-renewal rate of the poly-Schiff base resin coating in visible light. The degradation reaction rate of DPC-0.2 (20 wt% g-C-NS) was 40 times that of DPC, thus improving the capabilities of surface self-renewal and fouling-release. Due to the synergistic antifouling mechanism of the efficient antibacterial properties and the enhanced degradation/self-renewal, the antimicrobial rates of DPC and DPC-0.2 were 94.58% and 99.31% in the dark, and 98.2% and 99.87% in visible light. DPC-x has excellent all-weather antimicrobial efficacy and could offer a new perspective on eco-friendly marine antifouling strategies.

Construction of atom co-sharing Bi/Bi4O5Br2 nanosheet heterojunction for plasmonic-enhanced visible-light-driven photocatalytic antibacterial activity

The rapid advancement of photodynamic therapy (PDT) antibacterial materials has led to promising alternatives to antibiotics for treating bacterial infections. However, antibacterial drugs have poor light absorption and utilization rates, which limits their practical application. Constructing two-dimensional (2D) heterojunctions from materials with matching photophysical properties has emerged as a highly effective strategy for achieving high-efficiency photo-antibacterial performance. Here, we designed and prepared an atom co-sharing Bi/Bi4O5Br2 nanosheet heterojunction by a simple in situ reduction. This heterojunction material combines outstanding biocompatibility with excellent bactericidal efficiency, which exceeded 90 % against Escherichia coli (a Gram-negative bacterium) and Staphylococcus aureus (a Gram-positive bacterium) under visible light irradiation, around nine-fold higher than that with pure Bi4O5Br2 nanosheets. The results suggest that localized surface plasmon resonance (LSPR) of shared Bi atoms on the Bi4O5Br2 nanosheets promotes light utilization and the separation and transfer of photo-generated charges, thus producing more abundant reactive oxygen species (ROS), which can partake in the PDT antibacterial effect. Our study underscores the potential utility of LSPR-enhanced Bi-based nanosheet heterojunctions for safe and efficient PDT to combat bacterial infections.

Rational design of full-spectrum visible-light-responsive bimetallic sulfide Bi2S3/CoS2 composites for high-efficiency photocatalytic degradation of naproxen and bacterial inactivation

Photocatalytic water decontamination has emerged as a highly promising technology for efficient and rapid water treatment, harnessing sustainable solar energy as its driving force. In this study, we prepared visible-light active Bi2S3/CoS2 composites for the degradation of naproxen (NPX) and the inactivation of Escherichia coli (E. coli). The homogeneous dispersion of CoS2 was stably integrated with Bi2S3, resulting in a significant enhancement of the specific surface area, efficient utilization of visible light, and effective separation of photogenerated charge carriers. Consequently, this synergistic photocatalytic system greatly facilitated the successful degradation of NPX and the inactivation of E. coli under visible-light irradiation. Compared to the pure Bi2S3 and CoS2 catalysts, the Bi2S3/CoS2 (1:2) composites displayed significantly enhanced photodegradation activity, achieving 96.46% (k = 0.2847 min-1) degradation of NPX within 90 min and maintaining good recyclability with no significant decline after six successive cycles. Additionally, the photocatalytic inactivation of E. coli results indicated that Bi2S3/CoS2 composites exhibited excellent performance, leading to the inactivation of 7 log10 cfu mL-1 of bacterial cells after 150 min of visible-light exposure. Scanning Electron Microscopy (SEM) and K+ ions leakage tests demonstrated that the destruction of the E. coli cell membrane structure resulted in cell death. The outcomes of this work suggest that Bi2S3/CoS2 composites hold significant potential for treating water contaminated with antibiotic and microbial pollutants.

Preparation of magnetically separable and low-cost MC-FePd3NPs with enhanced catalytic activity in the reduction of p-nitrophenol

To obtain a magnetically separable, low-cost and highly efficient reduction catalyst, microbial carbon-loaded bimetallic palladium/iron nanoparticles (MC-FePd3NPs) were synthesized in this study by using waste yeast residue doped with iron during the preparation process of microbial carbon-loaded monometallic palladium nanoparticles (MC-Pd NPs). The morphology, crystal structure, magnetic properties and catalytic performance of MC-FePd3NPs for the reduction ofp-nitrophenol (p-NP) were investigated by various characterization techniques, such as SEM-EDS, TEM, XRD, PPMS-9 and UV-vis spectroscopy. The catalytic experiments showed that the MC-FePd3NPs prepared under pyrolysis conditions at 700 °C had an apparent rate constant of 1.85 × 10-1s-1which is better than the rate constants of MC-Pd NPs and other palladium-based nanocatalytic materials reported so far. The amount of palladium used in the synthesis of MC-FePd3NPs was half that of MC-Pd NPs. The catalyst exhibited soft magnetic ordering behavior and still showed a catalytic efficiency of 97.4% after five consecutive reaction cycles. Furthermore, employing MC-FePd3NPs reduces the costs of catalyst preparation and use in production. MC-FePd3NPs with efficient catalytic properties, facile magnetic separation and recyclability, and low costs of preparation and use have considerable potential for industrial applications.

Carbon quantum dots (CQDs) mediated Z-scheme g-C3N4-CQDs/BiVO4 heterojunction with enhanced visible light photocatalytic degradation of Paraben

The construction of a novel Z-scheme system which possesses superior charge separation and high redox ability is highly desirable for efficient photocatalytic degradation of organic pollutants. Herein, a carbon quantum dots (CQDs) modified g-C₃N₄ (GCN) and BiVO₄ (BVO) composite (GCN-CQDs/BVO) was fabricated via an initial loading of CQDs on GCN, and a subsequent combination with BVO during its hydrothermal synthesis. Physical characterization (e.g. TEM, XRD, XPS) verified the intimate heterojunction structure of the composite, while CQDs improved its light absorption. The band structures of GCN and BVO were evaluated, displaying the feasibility for Z-scheme formation. In comparison with GCN, BVO, and GCN/BVO, GCN-CQDs/BVO generated the highest photocurrent and lowest charge transfer resistance, inferring the prominently improved charge separation. Under visible light irradiation, GCN-CQDs/BVO exhibited the significantly enhanced activity in degrading the typical Paraben pollutant--benzyl paraben (BzP), achieving the removal of 85.7% in 150 min. The effects of various parameters were explored, demonstrating that neutral pH was optimal, while coexisting ions (CO₃^2-, SO₄^2-, NO₃^-, K⁺, Ca²⁺, Mg²⁺) and humic acid impacted the degradation negatively. Meanwhile, trapping experiments and electron paramagnetic resonance (EPR) technique revealed that superoxide radicals (•O₂^-) and hydroxyl radical (•OH) were primarily responsible for BzP degradation by GCN-CQDs/BVO. In particular, with the assistance of CQDs, the generation of •O₂^- and •OH was notably augmented. Based on these results, a Z-scheme photocatalytic mechanism was proposed for GCN-CQDs/BVO, where CQDs acted as electron mediators to combine the holes from GCN and electrons from BVO, resulting in significantly improved charge separation and maximized redox ability. Moreover, the toxicity of BzP was remarkably reduced during the photocatalytic process, emphasizing its great potential in abating the risk of Paraben pollutants.

Preparation of reed-based hydrothermal carbonized carbon photocatalyst and effective degradation of methylene blue and tetracycline

Hydrothermal carbonation carbon (HTCC) is a promising semiconductor material for the photocatalytic degradation of pollutants. However, the poor charge transfer capability of HTCC and the unclear mechanism of photocatalysis limit its practical application. In this study, a novel Z-type heterojunction photocatalyst of silver carbonate (Ag₂CO₃) and HTCC (Ag₂CO₃/HTCC) was developed for the degradation of methylene blue (MB) and tetracycline (TC) from wastewater using a hydrothermal- coprecipitation method. Compared to Ag₂CO₃ and HTCC, 40% Ag₂CO₃/HTCC had excellent photocatalytic activity and stability. The free radical scavenger experiments showed that •O₂^- and h⁺ were the main substances for the degradation of MB and TC. The intermediates formed during the photodegradation were identified by HPLC-MS, and a possible mechanism and pathway for the degradation of MB and TC by Ag₂CO₃/HTCC was proposed. This study provides a new idea for the synthesis of Z-type HTCC heterojunction with a high-photocatalytic efficiency and its photocatalytic mechanism.

Antimicrobial properties of heterojunction BiSnSbO6-ZnO composites in wastewater treatment

BiSnSbO6-ZnO composite photocatalytic material with type II heterojunction structure was synthesized by a simple solid-phase sintering method, it was characterized by XRD, UV-vis, and PT methods. The photocatalytic antibacterial experiments were carried out under LED light irradiation. The experimental results showed that the photocatalytic antibacterial properties of BiSnSbO6-ZnO composites against bacteria and fungi were significantly stronger than those of single BiSnSbO6 and ZnO. Under light conditions, the antibacterial efficiencies of 500 mg/L BiSnSbO6-ZnO composites against E. coli, S. aureus, and P. aeruginosa reached 99.63%, 100%, and 100% for 6 h, 4 h, and 4 h, respectively. The best antibacterial concentration of BiSnSbO6-ZnO composite against the eukaryotic microorganism Candida albicans was 250 mg/L, and the antibacterial efficiency reached the highest 63.8% at 6 h. Antibacterial experiments were carried out on domestic livestock and poultry wastewater, which showed that the BiSnSbO6-ZnO composite photocatalytic material has broad-spectrum antibacterial activity against bacteria, and the antibacterial effect has species differences. Through the MTT experiment, it is proved that the prepared BiSnSbO6-ZnO composite photocatalytic material has no toxicity at the experimental concentration. According to the free radical scavenging experiment and SEM observation of the morphological changes of the bacteria after light treatment, the prepared BiSnSbO6-ZnO composite photocatalytic material can generate active species OH, h+, and e- through light irradiation to achieve the purpose of sterilization, where e- play a major role, indicating that the BiSnSbO6-ZnO composite photocatalytic material has broad application prospects in the actual antibacterial field.

The reconstitution of reed cellulose by the hydrothermal carbonization and acid etching to improve the performance of photocatalytic degradation of antibiotics

As an economical and environment-friendly material, hydrothermal carbonation carbon (HTCC) has been widely used in the field of adsorption and catalysis. Previous studies mainly used glucose as raw material to prepare HTCC. Cellulose in biomass can be further hydrolyzed into carbohydrate; however, there are few reports on the direct preparation of HTCC from biomass and the relevant synthesis mechanism is unclear. In this study, HTCC with efficient photocatalytic performance was prepared from reed straw using dilute acid etching under hydrothermal conditions and was used for the degradation of tetracycline (TC). The mechanism of photodegradation of TC by HTCC was systematically elucidated through various characterization techniques and density functional theory (DFT) calculations. This study provides a new perspective on the preparation of green photocatalysts and demonstrates their promising application in environmental remediation.

Construction of a novel double S-scheme structure WO3/g-C3N4/BiOI: Enhanced photocatalytic performance for antibacterial activity

In recent years, the threat to human health from bacteria in wastewater has attracted attention, and photocatalytic technology has emerged as a promising strategy for inactivating bacteria in water. Therefore, it is of great research value to develop a novel high-efficiency photocatalytic system with the visible light response. We successfully designed a double S-scheme heterojunction composite WO₃/g-C₃N₄/BiOI (WCB) in this paper. The preparation of WCB composites was demonstrated by a series of characterizations, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). The antibacterial effects of photocatalysts against representative Gram-negative strain Escherichia coli (E. coli) and Gram-positive strain Staphylococcus aureus (S. aureus) were tested under LED light irradiation. The novel photocatalyst presented excellent antibacterial properties, inactivating E. coli in 12 min and S. aureus in 20 min. The bacterial cell inactivation process was studied by scanning electron microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM). Active species capture experiments show that the active species present in the WCB composites in the process of inactivating bacteria are h⁺, e^-, OH and O₂^-. In conclusion, the synthesized double S-scheme WCB photocatalyst exhibits remarkable photocatalytic antibacterial activity under LED light and has broad prospects for practical application in water antibacterial treatment.

Metal-organic frameworks doped with metal ions for efficient sterilization: Enhanced photocatalytic activity and photothermal effect

Photocatalytic and photothermal disinfection is a promising strategy for addressing the challenges of environmental microbial contamination. In this work, we choose a metal-organic framework (MOF), ZIF-8, as an inexpensive and ideal model for metal ion doping, and manipulate the band structure, thermal vibration in molecules, charge distribution, and robustness of the metal-ligand coordination bond of the metal-ion-doped ZIFs for their use in photo-disinfection. The effects of their absorption edge, rate of the photo-induced temperature rise, transient photocurrent response, photo-generated reactive oxygen species (ROS) type, and crystal stability on the photo-disinfection performance are systematically studied by varying the metal ion type (Co²⁺, Ni²⁺, or Cu²⁺) and doping concentration (1-100%). The results show that the efficiency of light harvesting and photogenerated carrier separation is facilitated in all doped ZIFs. The photothermal conversion gradually improves with the increasing concentration of doped Co²⁺/Cu²⁺. Remarkably, the photo-generated ROS type changes from the original singlet oxygen (¹O₂) to multiple ROS (¹O₂ and •O₂^-) due to the introduction of Co(II) sites. Consequently, compared with pristine ZIF-8 and other doped ZIFs, Co²⁺-doped ZIF-8 with a 5% doping concentration shows the highest sterilization efficiency (6.6 log₁₀ CFU mL^-1) against Escherichia coli (E. coli) under simulated sunlight within one hour by virtue of the enhanced photothermal effect and the generation of multiple ROS. This work provides insights into the application of metal-ion-doped MOF photocatalysts to the disinfection of environments with pathogenic microorganisms.

Antimicrobial photodynamic inactivation of wastewater microorganisms by halogenated indole derivative capped zinc oxide

Novel 5-bromoindole (5B)-capped zinc oxide (ZnO) nanoparticles (5BZN) were synthesized to improve the antibacterial, antibiofilm, and disinfection processes for the control of microorganisms in wastewater treatment. When exposed to 5BZN, the biofilm density and cell attachment were reduced dramatically, as measured by scanning electron microscopy (SEM). The 5BZN were also investigated for photodynamic treatment of multidrug-resistant (MDR) bacteria and toxicity. The combination of 5B and ZnO exhibited strong antibacterial and antibiofilm activities against MDR bacteria even at low doses (20 μg/mL). After 12.5 mW/cm² blue LED irradiation, the composite 5BZN showed superior photodynamic inactivation of two wastewater MDR, Enterobacter tabaci E2 and Klebsiella quasipneumoniae SC3, with cell densities reduced by 3.9 log CFU/mL and 4.7 log CFU/mL, respectively, after 120 min. The mechanism of bacterial inactivation was studied using a scavenging investigation, and H₂O₂ was identified mainly as the reactive species for bacterial inactivation. The 5BZN exhibited higher photodynamic inactivation towards the total coliform bacteria in wastewater effluents under a blue LED light intensity of 12.5 mW/cm² with almost complete inactivation of the coliform bacteria cells within 40 min. Furthermore, when 5BZN (100 mg/L) was added to the reactor, the level of tetracycline antibiotic degradation was increased by 63.6% after 120 min. The toxicity test, animal model nematode studies and seed germination assays, showed that 5BZN is harmless, highlighting its tremendous potential as a self-healing agent in large-scale photodynamic disinfection processes.

A modified flower pollen-based photothermocatalytic process for enhanced solar water disinfection: Photoelectric effect and bactericidal mechanisms

Solar disinfection (SODIS) is regarded as an affordable and effective point-of-use (POU) water disinfection treatment urgently needed in rural developing world. This work developed an enhanced SODIS scheme that utilized a novel flower pollen-based catalyst (Te-TRP). The bench-scale experiments demonstrated 100% photothermocatalytic inactivation of approximately 7-log E. coli K-12, Spingopyxis sp. BM1-1, or S. aureus bacterium by Te-TRP within 40-60 min. Moving toward practical device design, we constructed a flow-through reactor and demonstrated the outstanding water disinfection performance of Te-TRP. The in-depth mechanistic study revealed the synergetic effect between photocatalysis and photothermal conversion and identified the bacterial inactivation pathway. ¹O₂ and ·O₂^¯ were verified to be the dominant reactive oxygen species involved in the bacterial inactivation. The damage to bacterial cells caused by photothermocatalytic reactions was systematically investigated, demonstrating the cell membrane destruction, the loss of enzyme activity, the increased cell membrane permeability, and the complete inactivation of bacteria without the viable but nonculturable state cells. This work not only affords a facile approach to preparing biomaterial-based catalysts capable of efficient photothermocatalytic bacterial inactivation, but also proposes a prototype of POU water treatment, opening up an avenue for sustainable environmental remediation.

Piezoelectric effect enhanced photocatalysis in environmental remediation: State-of-the-art techniques and future scenarios

Photocatalysis has been widely used as an advanced oxidation process to control pollutants effectively. However, environmental photocatalysis' decontamination efficiency is restricted to the photogenerated electron-hole pairs' rapid recombination. Recently, emerging investigations have been directed to generate internal electric field by piezoelectric effect to enhance the separation efficiency of photogenerated charge carriers for better photocatalytic performance; however, there are still huge knowledge gaps on the rational application of piezo-photocatalysis in environmental remediation and disinfection. Thus, we have conducted a comprehensive review to better understand the physicochemical properties of piezoelectric materials (non-centrosymmetric crystal structures, piezoelectric coefficient, Young's modulus, and etc.) and current study states. We also elucidated the strategy of piezo-photo catalysis system constructions (mono-component, core-shell structure, and etc.) and underlying mechanisms of enhanced remediation performance. Addressing the current challenges and future scenarios (degradation of organic pollutants, disinfection, and etc.), the present review would shed light on the advanced wastewater treatment development towards sustainable control of emerging containments.

Visible-light-driven photocatalytic disinfection by S-scheme α-Fe2O3/g-C3N4 heterojunction: Bactericidal performance and mechanism insight

High-performance photocatalytic applications require to develop heterostructures between two semiconductors with matched band energy levels to facilitate charge-carrier separation. The S-scheme photocatalytic system has great potential to be explored, in terms of the improvement of charge separation, however, small efforts have been made in photocatalytic disinfection application. In this study, a non-toxic and low-cost S-scheme photocatalytic system composed of α-Fe₂O₃ and g-C₃N₄ was fabricated by in-suit production of g-C₃N₄ and firstly applied into water disinfection. The α-Fe₂O₃/g-C₃N₄ junction demonstrated an enhanced activity for photocatalytic bacterial inactivation, with the complete inactivation of 7 log₁₀ cfu·mL^-1 of Escherichia coli K-12 cells within 120 min under visible light irradiation. Its logarithmic bacterial inactivation efficiency was nearly 7 times better than that of single g-C₃N₄. The experimental results suggested that the effective prevention of charge-carrier recombination led to an improved generation of reactive oxygen species (ROSs), resulting in impressive disinfection performance. Moreover, the DNA gel electrophoresis experiments validated the reason for the irreversible death of bacteria, which was the leakage and destruction of chromosomal DNA. In addition, this S-scheme heterojunction also showed excellent photocatalytic disinfection performance in authentic water matrices (including tap water, secondary treated sewage effluent, and surface water) under visible light irradiation. Hence, the α-Fe₂O₃/g-C₃N₄ composite has great potential for sustainable and efficient photocatalytic disinfection applications.

Recent advances in photocatalytic removal of airborne pathogens in air

The abatement of airborne pathogens such as bacteria, viruses, and fungi has become an important goal of air-quality management. Efficient and effective treatment techniques such as photocatalysis are essential for disinfection of airborne microorganisms. This review focuses on recent advances in the formulation and development of photocatalytic disinfection, design of efficient photocatalysts, choice of photocatalytic reactor, removal and/or disinfection mechanisms, and the role of reactive ion species. Data from recent studies are analyzed to accurately assess the efficacy of such disinfection approaches. This review also highlights the application of innovative materials in individual and combined abatement systems against airborne bacterial, viral, and fungal pathogens. We discuss the efficiency and benefits presented by such systems, address the challenges, and provide a perspective for future research.

Construction of oxygen vacancy assisted Z-scheme BiO2-x/BiOBr heterojunction for LED light pollutants degradation and bacteria inactivation

It is well known that the most important task of photocatalytic technology is to synthesize photocatalysts with compact heterojunction structure and high redox ability. To achieve the goal, a novel Z-scheme BiO_2-x/BiOBr heterojunction containing oxygen vacancy was synthesized by an in-situ generation process. Several techniques, X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) have verified the BiO_2-x/BiOBr heterojunction. XPS and electron spin resonance (ESR) reveals the presence of oxygen vacancy in the BiO_2-x/BiOBr composite. As expected, the BiO_2-x/BiOBr composite showed good performance in removing Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), Rhodamine B (RhB) and tetracycline (TC). The effects of inorganic ions, pH value and water matrix were investigated with many details. The active species and proposed mechanism were revealed by trapping experiment and related characterizations. The synergistic effect of oxygen vacancy and Z-scheme heterojunction makes the BiO_2-x/BiOBr composite possess excellent photocatalytic activity.

Novel adsorbent based on carbon-modified zirconia/spinel ferrite nanostructures: Evaluation for the removal of cobalt and europium radionuclides from aqueous solutions

Herein, a novel adsorbent based on carbon-modified zirconia/spinel ferrite (C@ ZrO₂/Mn_0.5Mg_0.25Zn_0.25Fe₂O₄) nanostructures were chemically prepared to remove ⁶⁰Co and ^152+154Eu radionuclides from liquid media using batch experiments. The XRD pattern confirms the successful preparation of the C@ZrO₂/MnMgZnFe₂O₄ composite. Also, SEM and TEM images confirmed that the composite owns a heterogeneous morphology in the nanoscale range. The optical band gap value of Mn_0.5Mg_0.25Zn_0.25Fe₂O₄, ZrO₂, and the composite samples was 1.45, 2.38, and 1.54 eV, respectively. Many parameters have been studied as the effect of time, solution pH, and initial ion concentration. The kinetics models for the removal process of ^152+154Eu and ⁶⁰Co radionuclides were studied. The second-order kinetic equation could describe the sorption kinetics for both radionuclides. The Langmuir monolayer capacity for ⁶⁰Co was 82.51 mg/g and for ^152+154Eu was 136.98 mg/g. The thermodynamic parameters such as free energy ΔG^o, the enthalpy ΔH^o, and the entropy ΔS^o were calculated. The results indicated that the sorption process has endothermic nature for both two radionuclides onto C@ZrO₂/MnMgZnFe₂O₄ composite.

Adsorption and visible-light photocatalytic degradation of organic pollutants by functionalized biochar: Role of iodine doping and reactive species

Here we developed the functionalized biochar as low-cost and heavy metal-free photocatalysts via a facile iodine doping method, which exhibit efficient adsorption and visible-light-driven photocatalytic degradation of representative organic pollutants, phenol and tetracycline. On one hand, iodine doping elevates the adsorption via creating extra pores, e.g., the adsorbed amounts of phenol by iodine-doped WSP and OSR biochar are increased by 161.8% and 146.3%, respectively, which in turn facilitates the photocatalytic oxidation of the adsorbed pollutants. On the other hand, iodine doping leads to the strong photo-induced excitation and remarkably reduced charge carrier transfer resistance, boosting the photocatalytic activity of iodine-doped biochar by more than 20 orders towards organic pollutants (e.g., phenol) degradation. The systematic analysis of reactive species reveals the active roles of O₂^-, H₂O₂, ¹O₂, OH, electrons, and holes in photocatalytic process and identifies O₂^- to be the major contributor. This work affords a facile approach to generating porous and visible-light-driven photocatalyst from biomass for efficient adsorbing and degrading organic pollutants, opening up an avenue to turn biowaste into biomaterials for sustainable environmental remediation.

Photocatalytic Bactericidal Performance of LaFeO3 under Solar Light: Kinetics, Spectroscopic and Mechanistic Evaluation

Lanthanum orthoferrites are a versatile class of catalysts. Here, the photocatalytic bactericidal performance of LaFeO3 (LF) to inactivate pathogenic microorganisms, i.e., Escherichia coli (E. coli), in water under simulated solar irradiation conditions was investigated. Various competing and contributing factors were covered to visualize the reaction medium consisting of E. coli K12 cells, organic sub-fractions formed by cell destruction, and LF surface. LF solar photocatalytic inactivation (SPCI) kinetics revealed the highest inactivation rate in ultrapure water as expected, followed by distilled water (DW), aqueous solution containing anions and cations (WM) and saline solution (SS). Characterization of the released organic matter was achieved by UV-vis and fluorescence spectroscopic techniques as well as organic carbon contents (DOC). Upon SPCI, significant amounts of K+ along with released protein contents were detected expressing cell wall destruction and lysis. Under the specified experimental conditions, in the presence of released intracellular organic and inorganic components via cell lysis, a significant count of E. coli was still present in SS, whereas almost all bacteria were removed in other matrices due to various challenging reasons. Based on the presented data, SPCI of E. coli using LF as a novel photocatalyst was successfully demonstrated as an alternative and promising method for disinfection purposes.

Stable Fe3O4 submicrospheres with SiO2 coating for heterogeneous Fenton-like reaction at alkaline condition

In the traditional Fenton process, the efficient generation of hydroxyl radical (HO) strongly relies on an acidic circumstance and the iron ions would precipitate and form large amounts of hazardous iron-containing sludge at alkaline pH. To realize stable heterogeneous Fenton-like catalytic degradation at alkaline condition, Fe₃O₄ submicrospheres with SiO₂ coating were successfully synthesized by using water glass as the silica sources via a facile ultrasound assisted method. The as-obtained Fe₃O₄@SiO₂ spheres were further used as catalysts for the Fenton-like degradation of tetracycline hydrochloride (TC). The Fe₃O₄@SiO₂ submicrospheres exhibited superior catalytic activity in higher pH environment (pH value = 11), and the degradation efficiency toward TC was ca. 80% after ten successive runs. The kinetics for the catalytic degradation of TC were agreed well with the second-order kinetic model. The reaction rate constant (k) over the Fe₃O₄@SiO₂ submicrospheres at a pH value of 11 was 7.69 times greater than that at a pH value of 3. Reactive species scavenging experiments revealed that HO and superoxide radical (O₂^- / HO₂^-) played a dominant role during the Fenton-like degradation of TC at pH 3 and pH 11, respectively. Possible Fenton-like degradation pathways of TC were proposed through the identification of intermediates using the high performance liquid chromatography coupled with mass spectrometry (HPLC-MS), which involved cleavage of methyl groups, N-dimethyl group, and hydroxy groups, ring-opening reaction, etc. The degradation efficiency of TC was close to 91.5% and total organic carbon (TOC) in solution was eliminated by about 41.4% at the optimized conditions. In a word, with the unique acidic surface properties and abundant Si-OH bonds, the Fe₃O₄@SiO₂ submicrospheres exhibited well dispersion, good catalytic activity, strong alkali resistance and excellent recyclability in an ultrasonic-Fenton-like system.

Bioremediation of Crude Glycerol by a Sustainable Organic-Microbe Hybrid System

Klebsiella pneumoniae with crude glycerol-utilizing and hydrogen (H₂)-producing abilities was successfully isolated from return activated sludge from Shatin Sewage Treatment Works. The H₂ production strategy used in this study was optimized with crude glycerol concentrations, and 1,020 μmol of H₂ was generated in 3 h. An organic–microbe hybrid system was constructed with metal-free hydrothermal carbonation carbon (HTCC) microspheres to enhance the H₂ production under visible light (VL) irradiation. Under optimized VL intensity and HTCC concentration, an elevation of 35.3% in H₂ production can be obtained. Electron scavenger study revealed that the photogenerated electrons (e^–) from HTCC contributed to the additional H₂ production. The variation in intercellular intermediates, enzymatic activity, and reducing equivalents also suggested that the photogenerated e^– interacted with K. pneumoniae cells to direct the metabolic flux toward H₂ production. This study demonstrated the feasibility of using an organic–microbe hybrid system as a waste-to-energy technology.

Enhanced Fenton-like degradation of sulfadiazine by single atom iron materials fixed on nitrogen-doped porous carbon

The use of single-atom iron catalysts in heterogeneous Fenton-like reactions has demonstrated tremendous potential for antibiotic wastewater treatment. In this study, single-atom iron fixed on nitrogen-doped porous carbon materials (Fe-ISAs@CN) was synthesised using a metal organic framework (MOF) as a precursor. Fe-ISAs@CN was applied as a heterogeneous Fenton catalyst to activate H₂O₂ for the degradation of sulfadiazine (SDZ) in an aqueous solution. The physical and chemical properties of Fe-ISAs@CN were characterised by scanning electron microscopy (SEM), transmission electron microscope (TEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and rotating disk electrode (RDE) measurements. The results of our degradation experiments indicated that Fe-ISAs@CN exhibited remarkable activity and stability for the degradation of SDZ over a wide pH range; even after five cycles, Fe-ISAs@CN retained a high catalytic efficiency (>80%). The 5,5-dimethyl-1-oxaporphyrin-n-oxide (DMPO)-X signal captured by electron paramagnetic resonance (EPR) spectroscopy indicated that a large amount of hydroxyl radicals (OH) was produced in the reaction system. Quench tests indicated that the OH was the main active substance in the degradation of SDZ. The degradation products of the reaction were analysed by High Performance Liquid Chromatography-Mass Spectrometry (HPLC-MS), and possible degradation pathways for the SDZ degradation were proposed.

Delivery, fate and physiological effect of engineered cobalt ferrite nanoparticles in barley (Hordeum vulgare L.)

Cobalt ferrite nanoparticles (CoFe₂O₄ NPs) have received increasing attention in a widespread application. This work examines the fate and impact of terbium (Tb) substituted CoFe₂O₄ NPs on the growth, physiological indices, and magnetic character of barley (Hordeum vulgare L.). Sonochemically synthesized NPs were hydroponically applied on barley with changing doses (125-1000 mg/L) at germination and seedling (three weeks) stages. Results revealed a significant reduction in germination rate (∼37% at 1000 mg/L); however, a remarkable growth (∼38-65%) and biomass (∼72-133%) increase were detected at three weeks of exposure (p < 0.05). The elements that make up the NPs (i.e., Tb, Co, and Fe) increased significantly in both root and leaf tissues, indicating the translocation of NPs from the root to leaf. Vibrating-sample magnetometer (VSM) analysis confirmed this finding, where magnetic signals in the root and leaf samples of the control were respectively about 26 and 75 times lower than that of NPs-treated tissues. Also, the accumulation of NPs altered the leaf photoluminescence (PL) behavior, which may have contributed to the biomass increase. Overall, Tb-doped CoFe₂O₄ NPs translocate from root-to-leaf and enhance plant growth, possibly due to i) incorporation of iron within tissues, and ii) changes in photoluminescence. However, since its effects on other living things are not known yet, its agricultural use and release to nature should be considered well.

Development of bactericidal spinel ferrite nanoparticles with effective biocompatibility for potential wound healing applications

The current study was devised to explore the antibacterial activity and underlying mechanism of spinel ferrite nanoparticles (NPs) along with their biocompatibility and wound healing potentials. In this regard, nickel ferrite and zinc/nickel ferrite NPs were synthesized via a modified co-precipitation method and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy Energy-dispersive X-ray spectroscopy (EDX). The biocompatibility of the synthesized NPs with human dermal fibroblast (HDF) and red blood cells (RBCs) was assessed. The biocompatible concentrations of the NPs were used to investigate the antimicrobial activity against various pathogenic Gram-negative and Gram-positive bacteria. The mode of bactericidal action was also explored. In vitro scratch assay was performed to evaluate the wound healing potential of NPs. The SEM-EDX analysis showed that the average particles size of nickel ferrite and zinc/nickel ferrite were 49 and 46 nm, respectively, with appropriate elemental composition and homogenous distribution. The XRD pattern showed all the characteristic diffraction peaks of spinel ferrite NPs, which confirmed the synthesis of the pure phase cubic spinel structure. The biocompatible concentration of nickel ferrite and zinc/nickel ferrite NPs was found to be 250 and 125 μg ml-1, respectively. Both the NPs showed inhibition against all the selected strains in the concentration range of 50 to 1000 μg ml-1. Studies on the underlying antimicrobial mechanism revealed damage to the cell membrane, protein leakage, and intracellular reactive oxygen species production. The in vitro scratch assay confirmed the migration and proliferation of fibroblast with artificial wound shrinkage. This study shows that nickel ferrite and zinc/nickel ferrite NPs could be a strong candidate for antibacterial and wound healing nano-drugs.

Disinfection of Wastewater by UV-Based Treatment for Reuse in a Circular Economy Perspective. Where Are We at?

Among the critical issues that prevent the reuse of wastewater treatment plants (WWTPs) effluents in a circular economy perspective, the microbiological component plays a key role causing infections and diseases. To date, the use of conventional chemical oxidants (e.g., chlorine) represent the main applied process for wastewater (WW) disinfection following a series of operational advantages. However, toxicity linked to the production of highly dangerous disinfection by-products (DBPs) has been widely demonstrated. Therefore, in recent years, there is an increasing attention to implement sustainable processes, which can simultaneously guarantee the microbiological quality of the WWs treated and the protection of both humans and the environment. This review focuses on treatments based on ultraviolet radiation (UV) alone or in combination with other processes (sonophotolysis, photocatalysis and photoelectrocatalysis with both natural and artificial light) without the dosage of chemical oxidants. The strengths of these technologies and the most significant critical issues are reported. To date, the use of synthetic waters in laboratory tests despite real waters, the capital and operative costs and the limited, or absent, experience of full-scale plant management (especially for UV-based combined processes) represent the main limits to their application on a larger scale. Although further in-depth studies are required to ensure full applicability of UV-based combined processes in WWTPs for reuse of their purified effluents, excellent prospects are presented thanks to an absent environmental impact in terms of DBPs formation and excellent disinfection yields of microorganisms (in most cases higher than 3-log reduction).

Conversion of Biomasses and Copper into Catalysts for Photocatalytic CO2 Reduction

The rapid increase of CO₂ in the atmosphere has caused serious environmental problems. Burning of biomass wastes increases the content of CO₂ in the environment. Herein, we propose a new strategy to convert biomass into photocatalysts for artificial CO₂ reduction. Using a hydrothermal method, carbohydrates from biomass can be converted into hydrothermal carbonaceous carbon (HTCC). The HTCC consists of plenty of sp²-hybridized structures, which are capable of absorbing solar light for photocatalytic CO₂ reduction. Furthermore, with the addition of Cu cocatalysts, higher activity can be obtained for CO₂ reduction. The activity of Cu-HTCC is 32 and 1.7 times higher than that of commercial TiO₂ and pure HTCC, respectively. This method provides a new strategy of trash to treasure, which converts biomass waste into photocatalysts for CO₂ reduction.

AgI modified covalent organic frameworks for effective bacterial disinfection and organic pollutant degradation under visible light irradiation

Covalent organic frameworks (COFs) have recently been demonstrated to have great application potentials in water treatment. Their photocatalytic performance towards bacterial disinfection and organic pollutant degradation yet has seldom been investigated. In this study, AgI modified COFs (using 2,5-diaminopyridine and 1,3,5-triformylphloroglucinol as precursors) (COF-PD/AgI) were fabricated and their applications to photocatalytically disinfect bacteria and degrade organic pollutants were investigated. COF-PD/AgI exhibited effective photocatalytic performance towards Escherichia coli disinfection and organic pollutant (Rhodamine B and acetaminophen) degradation. SEM images were employed to investigate cell disinfection process, while theoretical density functional theory (DFT) calculation and intermediates determination were used to elucidate organic pollutant degradation processes. Scavenger experiments, ESR spectra and chemical probes experiments confirmed O₂^-, h⁺ and OH played important roles in the photocatalytic process. The formation of dual-band Z-scheme heterojunction improved photocatalytic performance. COF-PD/AgI remained high photocatalytic activity in the four consecutive cycles and could serve as a promising photocatalyst for water purification.

Green synthesis of a novel Mn-Zn ferrite/biochar composite from waste batteries and pine sawdust for Pb2+ removal

Magnetic ferrite/biochar composites are a kind of promising adsorbents due to their high adsorption efficiency and facile magnetic separation; however, their synthesis is associated with high cost and secondary environmental impacts. In this study, a novel Mn-Zn ferrite/biochar composite (MZF-BC) is synthesized via a green two-step biocheaching and hydrothermal method using waste batteries and pine sawdust. Characterization results indicate that the introduced Mn-Zn ferrite particles are successfully embedded and coated on biochar (BC), and synthesized MZF-BC₅₀ with 50% BC content exhibits best performance with a specific surface area of 138.5 m² g^-1, the saturation magnetization of 27.5 emu g^-1 and CEC value of 53.2 mmol 100 g^-1. The maximum adsorption capacity of Pb²⁺ is 99.5 mg g^-1 based on the Langmuir sorption isotherm study at 298 K, and pseudo-second-order model accurately describes the adsorption process. Regeneration test suggests that MZF-BC₅₀ can be efficiently reused for 6 cycles. In addition, it exhibits a good selective Pb²⁺ and Cd²⁺ removal performance in lead-acid battery wastewater. The results illustrate that this newly developed material has low cost and rapid remediation of Pb²⁺ as good application potential.

Thermally treated zeolitic imidazolate framework-8 (ZIF-8) for visible light photocatalytic degradation of gaseous formaldehyde

The development of wide-spectrum responsive photocatalysts for efficient formaldehyde (HCHO) removal is highly desired yet remains a great challenge. Here we successfully converted zeolitic imidazolate framework-8 (ZIF-8), one of the most well-studied metal-organic frameworks (MOFs), from routine ultraviolet-driven to novel broad-spectrum-driven photocatalyst via a facile thermal treatment. The isocyanate groups (-N[double bond, length as m-dash]C[double bond, length as m-dash]O) formed in the thermally treated ZIF-8 (ZIF-8-T) is crucial in enabling the superior photocatalytic performance in formaldehyde degradation. Specifically, the best-performing ZIF-8-T sample showed around 2.1 and 9.4 times the HCHO adsorption amount and the solar photocatalytic degradation rate, respectively, of pristine ZIF-8. In addition, ZIF-8-T exhibited visible light (λ ≥ 400 nm) photocatalytic HCHO degradation performance, photo-converting 72% and nearly 100% of 20 ppm and 10 ppm HCHO within 1 hour, respectively. This work affords new insights and knowledge that inspire and inform the design and development of MOF-based photocatalysts with broad-spectrum responses for efficient air purification operations.

Highly efficient removal of thallium(I) from wastewater via hypochlorite catalytic oxidation coupled with adsorption by hydrochar coated nickel ferrite composite

In this study, tannery wastewater was used as carbon source to hydrothermally synthesize magnetic carbon-coated nickel ferrite composite (NiFe₂O₄@C), which was employed as a catalyst for thallium (Tl) oxidation by hypochlorite and simultaneously as an adsorbent for Tl removal from wastewater. Compared with NiFe₂O₄@C adsorption or hypochlorite oxidation alone, the combination of NiFe₂O₄@C and hypochlorite substantially enhanced the rate and efficiency of Tl(I) removal. In addition, this process was highly effective for Tl(I) removal over a wide pH range (6-12). The maximum Tl(I) removal capacity was 1699 mg/g at pH 10, which is the highest one reported so far. Electron spin resonance spectra suggested the formation of hypochlorite-based free radicals induced by the NiFe₂O₄@C composite, which enhanced the Tl(I) oxidation and removal. Oxidation-induced surface precipitation and surface complexation were found to be the main Tl(I) removal mechanisms. Consecutive cyclic regeneration tests implied robust regeneration and reuse performance of the composite. Moreover, it was effective for Tl(I) removal from real industrial wastewater. Therefore, the hypochlorite catalytic oxidation coupled with adsorption by the magnetic NiFe₂O₄@C composite is a promising technique for Tl(I) removal from wastewater. This hybrid process also has great potential for the removal of other pollutants.

Photocatalytic Bacterial Inactivation by a Rape Pollen-MoS2 Biohybrid Catalyst: Synergetic Effects and Inactivation Mechanisms

A novel and efficient 3D biohybrid photocatalyst, defective MoS₂ nanosheets encapsulated carbonized rape pollen, was fabricated and applied to water disinfection. The rape pollen-MoS₂ (PM) biohybrid showed excellent dispersibility, high stability, and efficient charge-carrier separation and migration ability, resulting in the highly enhanced photocatalytic inactivation performance toward various waterborne bacteria under different light sources. The inactivation mechanisms were systematically investigated. Reactive species (RSs), including electrons, holes, and reactive oxygen species (•O₂^- and •OH), played major roles in inactivating bacteria. The antioxidant system of bacteria exhibited a self-protection capacity by eliminating the photogenerated RSs from PM biohybrid at the early stage of inactivation. With the accumulation of RSs, the cell membrane and membrane-associated functions were destroyed, as suggested by the collapse of cell envelope and subsequent loss of cell respiration and ATP synthesis capacity. The microscopic images further confirmed the destruction of the bacterial membrane. After losing the membrane barrier, the oxidation of cytoplasmic proteins and lipids caused by invaded RSs occurred readily. Finally, the leakage of DNA and RNA announced the irreversible death of bacteria. These results indicated that the bacterial inactivation began with the membrane rupture, followed by the oxidation and leakage of intracellular substances. This work not only provided a new insight into the combination of semiconductors with earth-abundant biomaterials for fabricating high-performance photocatalysts, but also revealed the underlying mechanisms of photocatalytic bacterial inactivation in depth.

Synthesis of a Novel Catalyst MnO/CNTs for Microwave-Induced Degradation of Tetracycline

Microwave-induced catalytic degradation (MICD) has been considered as one of the most prospective approaches to remove organic contaminants from water. High-performance catalysts, ideally offering efficient degradation ability, are essential to this process. This work reports the fabrication of manganese oxide on carbon nanotubes (MnO/CNTs) as an efficient catalyst under microwave irradiation (MI) to remove tetracycline (TC) from aqueous solution. The hybrid MnO/CNTs structure shows excellent performance in TC degradation. Combining experimental characterization and theoretical calculations, synergistic mechanisms are revealed: (i) Strong MnO/CNTs interaction stabilizes Mn(II) through interfacial bonding; (ii) high-spin states associated with low coordinated Mn(II) play a major role in MICD; and (iii) superoxide radicals (•O2−) and hydroxyl radicals (•OH) induced by microwave input are identified as the major active species.

Visible-light-driven photocatalytic disinfection mechanism of Pb-BiFeO3/rGO photocatalyst

While the visible-light-driven photocatalytic disinfection techniques for drinking water have recently attracted tremendous attentions, it is necessary to further improve the solar energy utilization efficiency. In this study, we synthesized Pb-BiFeO₃ photocatalysts doped with different amounts of reduced graphene oxide (Pb-BiFeO₃/rGO). The photocatalytic disinfection efficiencies toward gram-negative Escherichia coli (E. coli) and gram-positive Staphylococcus aureus (S. aureus) were evaluated under visible-light irradiation (λ ≥ 400 nm). The results indicated that Pb-BiFeO₃ with 0.5 wt% rGO (Pb-BiFeO₃/0.5% rGO) exhibited the highest disinfection efficiency. Complete inactivation was reached within 30 min and 90 min for E. coli and S. aureus, respectively. The transcriptomic analysis results indicated that Pb-BiFeO₃/0.5% rGO deregulates the genes in E. coli cells that are involved in the cell membrane damage and oxidative stress responses. This was validated by the cell leakage of nucleic acids or proteins, transmission electron microscopy images of the bacteria, and the disinfection efficiency decrease caused by the introduction of scavenger of hydroxyl radical (HO•). Metal ions (Pb²⁺, Bi²⁺, and Fe³⁺) released from the photocatalysts did not contribute to the disinfection process. For the first time, our results elucidated that the photocatalytic disinfection mechanism of Pb-BiFeO₃/rGO toward E. coli was mainly associated with oxidative stress due to HO• generation and the loss of membrane integrity from direct contact with the photocatalyst. After four consecutive cycles, the Pb-BiFeO₃/0.5% rGO photocatalyst exhibited a strong antibacterial efficiency. The excellent disinfection efficiency and stability of Pb-BiFeO₃/0.5% rGO suggests that this photocatalyst shows great potential for drinking water disinfection.

N-doped graphitic biochars from C-phycocyanin extracted Spirulina residue for catalytic persulfate activation toward nonradical disinfection and organic oxidation

Biochars are low-cost and environmental-friendly materials, which are promising in wastewater treatment. In this study, biochars were manufactured from C-phycocyanin extracted (C-CP) Spirulina residue (SDBC) via thermal pyrolysis. Simultaneously, N-doping was also achieved from the protein in the algae for obtaining a high-performance carbocatalyst for peroxydisulfate (PDS) activation. The SDBC yielded large specific surface areas, nitrogen loading, and good conductivity, which demonstrated excellent oxidation efficiencies toward a wide array of aqueous microcontaminants. An in-depth mechanistic study was performed by integrating selective radical scavenging, solvent exchange (H₂O to D₂O), diverse organic probes, and electrochemical measurement, unveiling that SDBC/PDS did not rely on free radicals or singlet oxygen but a nonradical pathway. PDS intimately was bonded with a biochar (SDBC 900-acid, pyrolysis at 900 °C) to form a surface reactive complex that subsequently attacked an organic sulfamethoxazole (SMX) adsorbed on the biochar via an electron-transfer regime. During this process, the SDBC 900-acid played versatile roles in PDS activation, organic accumulation and mediating the electron shuttle from SMX to PDS. This nonradical system can maintain a superior oxidation efficiency in complicated water matrix and long-term stable operation. More importantly, the nonradical species in SDBC 900-acid/PDS system were capable of inactivating the bacteria (Escherichia coli) in wastewater. Therefore, the biochar based nonradical system can provide a mild and high-efficiency strategy for disinfection in waste and drinking water by green carbocatalysis. This study provides not only a value-added biochar catalyst for wastewater purification but also the first insight into the bacteria inactivation via nonradical oxidation.

Synthesis and Properties of Ferrite-Based Nanoparticles

The work is dedicated to the study of the structural and optical characteristics, as well as the phase transformations, of ferrite nanoparticles of CeO₂-Fe₂O₃. To characterize the results obtained, the methods of scanning and transmission microscopy, X-ray diffraction (XRD) spectroscopy, and Mössbauer spectroscopy were applied. It was found that the initial nanoparticles are polycrystalline structures based on cerium oxide with the presence of X-ray amorphous inclusions in the structure, which are characteristic of iron oxide. The study determined the dynamics of phase and structural transformations, as well as the appearance of a magnetic texture depending on the annealing temperature. According to the Mossbauer spectroscopy data, it has been established that a rise in the annealing temperature gives rise to an ordering of the magnetic properties and a decrease in the concentration of cationic and vacancy defects in the structure. During the life test of synthesized nanoparticles as cathode materials for lithium-ion batteries, the dependences of the cathode lifetime on the phase composition of nanoparticles were established. It is established that the appearance of a magnetic component in the structure result in a growth in the resource lifetime and the number of operating cycles. The results show the prospects of using these nanoparticles as the basis for lithium-ion batteries, and the simplicity of synthesis and the ability to control phase transformations opens up the possibility of scalable production of these nanoparticles for cathode materials.

Elimination of Escherichia coli in Water Using Cobalt Ferrite Nanoparticles: Laboratory and Pilot Plant Experiments

This paper focuses on the synthesis of cobalt ferrite nanoparticles by the sol-gel method and their photocatalytic activity to eliminate bacteria in aqueous media at two different scales: in a laboratory reactor and a solar pilot plant. Cobalt ferrite nanoparticles were prepared using Co(II) and Fe(II) salts as precursors and cetyltrimethyl ammonium bromide as a surfactant. The obtained nanoparticles were characterized by X-ray diffraction, scanning and transmission electron microscopy. Escherichia coli (E. coli) strain ATCC 22922 was used as model bacteria for contact biocidal analysis carried out by disk diffusion method and photocatalysis under an ultraviolet A (UV-A) lamp for laboratory analysis and solar radiation (radiation below 350 W/m2 in a typical cloudy day) for the pilot plant analysis. The results showed that cobalt ferrite nanoparticles have an average diameter of (36 ± 20) nm and the X-ray diffraction pattern shows a cubic spinel structure. Using the disk diffusion technique, it was obtained inhibition zones of (17 ± 2) mm diameter. Results confirm the photocatalytic elimination of E. coli in water samples with remaining bacteria below 1% of the initial concentration during the experiment time (30 min for laboratory tests and 1.5 h for pilot plant tests).

Visible-light-driven photocatalytic inactivation of bacteriophage f2 by Cu-TiO2 nanofibers in the presence of humic acid

Pathogenic viruses in drinking water are great threats to public health. Visible-light-driven photocatalysis is a promising technology for virus inactivation. However, the existing photocatalytic antiviral research studies have mostly been carried out in single-component systems, neglecting the effect of natural organic matter, which exists widely in actual water bodies. In this paper, electrospun Cu-TiO₂ nanofibers were prepared as photocatalysts, and their photocatalytic antiviral performance in the presence of humic acid (HA) was comprehensively studied for the first time. The properties of the reaction mixture were measured during the reaction. In addition, the safety, reliability and stability of photocatalytic disinfection in the mixed system were evaluated. The results showed that the virus removal efficiency decreased with the increase of the HA concentration. The type of reaction solution, such as PBS buffer solution or water, did not affect the removal efficiency noticeably. Under acidic conditions, the electrostatic forces between photocatalysts and viruses were strengthened, leading to higher virus removal efficiency. As the reaction time went on, the pH value in the solution increased first and then tended to be stable, the conductivity remained stable, and the dissolved oxygen increased first and then decreased. The safety test showed that the concentration of Cu ions released into the solution was lower than specified by the international standards. No photoreactivation was observed, and the addition of HA significantly reduced the reutilization efficiency of the photocatalysts.

Reusable magnetic Ag/Fe, N-TiO2/Fe3O4@SiO2 composite for simultaneous photocatalytic disinfection of E. coli and degradation of bisphenol A in sewage under visible light

A visible-light-driven and magnetic photocatalyst Ag/Fe,N-TiO₂/Fe₃O₄@SiO₂ (AgFeNTFS) was synthesized through a multi-step method. AgFeNTFS was tested for the photocatalytic disinfection of Escherichia coli (E. coli) and degradation of bisphenol A (BPA) under visible light irradiation, separately and simultaneously. The results showed that a 6.3-log reduction in cell density of E. coli was achieved and BPA (2 mg/L) was completely removed by AgFeNTFS in the separated photocatalytic processes within 120 min. In the simultaneous process, the photocatalytic disinfection of E. coli was not influenced in the presence of BPA, but the efficiency of BPA degradation was dropped by 10%. This was likely due to the competition for the same dominant reactive species of O₂^- and H₂O₂ between E. coli and BPA in the simultaneous process, as evidenced by the scavenger study and the interactions between the pollutants and AgFeNTFS. Moreover, the simultaneous photocatalytic activity of E. coli disinfection and BPA degradation by AgFeNTFS was investigated in the sewage obtained from a local wastewater treatment plant. The photocatalysis treated sewage could meet with the local disinfection discharge standard with a 3-log reduction of E. coli after 90 min, and a complete removal of BPA was achieved simultaneously after 360 min. Moreover, AgFeNTFS showed high magnetic separation efficiency and had a good reusability over three cycles for the simultaneous photocatalytic disinfection and degradation of BPA in both synthetic water and sewage. This study provides insights on the application of a reusable magnetic photocatalyst for simultaneous disinfection and degradation of BPA in sewage.