Novel Composite Electrodes for Selective Removal of Sulfate by the Capacitive Deionization Process

Advanced capacitive deionization for ion selective separation: Insights into mechanism over a functional classification

Due to the diversity and variability of harmful ions in polluted water bodies, the selective removal and separation for specific ions is of great significance in water purification and resource processes. Capacitive deionization (CDI), an emerging desalination technology, shows great potential to selectively remove harmful ionic pollutants and further recover valuable ions because of the simple operation and low energy consumption. Researchers have done a lot of work to investigate ion selectivity utilizing CDI, including both theoretical and experimental studies. Nevertheless, in the investigation of selective mechanisms, phenomena where carbon materials exhibit entirely opposite selectivity require further analysis. Furthermore, there is a need to summarize the specific chemical reaction mechanisms, including the formation of hydrogen bonds, complexation reactions, and ligand exchanges, within selective electrodes, which have not been thoroughly examined in detail previously. In order to fill these gaps, in this review, we summarized the recent progress of CDI technologies for ion selective separation, and explored the selective separation mechanism of CDI from three aspects: selective physical adsorption, specific chemical reaction, and the utilization of selective barriers. Additionally, this review analyzes in detail the formation process of chemical bonds and ion conversion pathways when ions interact with electrode materials. Finally, some significant development prospects and challenges were offered for the future selective CDI systems. We believe the review will provide new insights for researchers in the field of ion selective separation.

Selectivity adsorption of sulfate by amino-modified activated carbon during capacitive deionization

ABSTRACTCapacitive deionization (CDI) is an environmentally friendly desalination technique with low energy consumption. However, unmodified carbon electrode materials have poor sulfate selectivity and adsorption capacity. In this work, to improve sulfate selectivity, we prepared activated carbon materials loaded with different amino contents by grafting amino groups via acid treatment for different times. In the competitive ion adsorption experiments, the sulfate selectivity of AC was only 0.64 and the amino-modified AC increased by 1.98-2.52 times due to the formation of stronger hydrogen bonds between the amino group and sulfate. AC-NH₂-4 had the best selectivity and the sulfate selective coefficient was 2.25. The desorption of sulfate was 92.46% within one hour. In addition, the surface of the amino-modified activated carbon showed significantly improved electrochemical properties and better capacitance. The specific capacitance of amino-modified AC in different electrolyte solutions was consistent with the competitive adsorption results. The specific capacitance of amino-modified AC in Na₂SO₄ electrolyte solution was the highest. The modified electrode material also had the advantages of a higher adsorption capacity and excellent regeneration performance after continuous electric adsorption-desorption cycles. Therefore, it may have development potential to selectively adsorb sulfate in practical applications.

Electrochemical Reduction of Nitrate with Simultaneous Ammonia Recovery Using a Flow Cathode Reactor

The presence of excessive concentrations of nitrate in industrial wastewaters, agricultural runoff, and some groundwaters constitutes a serious issue for both environmental and human health. As a result, there is considerable interest in the possibility of converting nitrate to the valuable product ammonia by electrochemical means. In this work, we demonstrate the efficacy of a novel flow cathode system coupled with ammonia stripping for effective nitrate removal and ammonia generation and recovery. A copper-loaded activated carbon slurry (Cu@AC), made by a simple, low-cost wet impregnation method, is used as the flow cathode in this novel electrochemical reactor. Use of a 3 wt % Cu@AC suspension at an applied current density of 20 mA cm^-2 resulted in almost complete nitrate removal, with 97% of the nitrate reduced to ammonia and 70% of the ammonia recovered in the acid-receiving chamber. A mathematical kinetic model was developed that satisfactorily describes the kinetics and mechanism of the overall nitrate electroreduction process. Minimal loss of Cu to solution and maintenance of nitrate removal performance over extended use of Cu@AC flow electrode augers well for long-term use of this technology. Overall, this study sheds light on an efficient, low-cost water treatment technology for simultaneous nitrate removal and ammonia generation and recovery.

Gypsum scale formation and inhibition kinetics with implications in membrane system

Water desalination using membrane technology is one of the main technologies to resolve water pollution and scarcity issues. In the membrane treatment process, mineral scale deposition and fouling is a severe challenge that can lead to filtration efficiency decrease, permeate quality compromise, and even membrane damage. Multiple methods have been developed to resolve this problem, such as scale inhibitor addition, product recovery ratio adjustment, periodic membrane surface flushing. The performance of these methods largely depends on the ability to accurately predict the kinetics of mineral scale deposition and fouling with or without inhibitors. Gypsum is one of the most common and troublesome inorganic mineral scales in membrane systems, however, no mechanistic model is available to accurately predict the induction time of gypsum crystallization and inhibition. In this study, a new gypsum crystallization and inhibition model based on the classical nucleation theory and a Langmuir type adsorption isotherm has been developed. Through this model, it is believed that gypsum nucleation may gradually transit from homogeneous to heterogeneous nucleation when the gypsum saturation index (SI) decreases. Such transition is represented by a gradual decrease of surface tension at smaller SI values. This model assumes that the adsorption of inhibitors onto the gypsum nucleus can increase the nucleus superficial surface tension and prolong the induction time. Using the new model, this study accurately predicted the gypsum crystallization induction times with or without nine commonly used scale inhibitors over wide ranges of temperature (25-90 °C), SI (0.04-0.96), and background NaCl concentration (0-6 mol/L). The fitted affinity constants between scale inhibitors and gypsum show a good correlation with those between the same inhibitors and barite, indicating a similar inhibition mechanism via adsorption. Furthermore, by incorporating this model with the two-phase mineral deposition model our group developed previously, this study accurately predicts the gypsum deposition time on the membrane material surfaces reported in the literature. We believe that the model developed in this study can not only accurately predict the gypsum crystallization induction time with or without scale inhibitors, elucidate the gypsum crystallization and inhibition mechanisms, but also optimize the mineral scale control in the membrane filtration system.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Selective removal of Sr(II) from saliferous radioactive wastewater by capacitive deionization

⁹⁰Sr-containing radioactive wastewater during Fukushima nuclear accident (FNA) aroused extensive consideration for its disposal. Massive coexisted Na⁺ ions seriously inhibited Sr²⁺ removal, aggravating the expenditure of radioactive wastewater treatment. Herein, a chestnut shell derived porous carbon material modified with aryl diazonium salt (ADS) of sodium 4-aminoazobenzene-4'-sulfonate (SPAC) was developed as capacitive deionization electrode for selective removal of Sr²⁺ from saliferous radioactive wastewater. Based on ADS modification, the Sr²⁺ electrosorption capacity of SPAC electrode was improved to 33.11 mg g^-1 with fast ion removal rate of 2.89 mg g^-1 min^-1, comparing with only 16.10 mg g^-1 before modification. The isothermal adsorption and kinetics by SPAC electrode fitted well with Langmuir and pseudo-second-order model, achieving a maximum Sr²⁺ electrosorption capacity of 58.21 mg g^-1, superior cycling stability, and excellent charge efficiency (77.63%). Fascinatingly, the SPAC electrode exhibited superhigh Sr²⁺ selectivity of 70.65 against Na⁺ in Na⁺-Sr²⁺ mixed solution with molar ratio of Na⁺:Sr²⁺ as 20:1. Density functional theory (DFT) simulation, combining with electrochemical and spectral analyses, revealed that the high overlap of electron cloud between Sr²⁺ ion and anionic sulfonic group (-SO₃^-) provided SPAC with remarkable selectivity of Sr²⁺ ion, and illustrated the ion-swapping mechanism of Sr²⁺ selectivity.

Eggshell membrane derived nitrogen rich porous carbon for selective electrosorption of nitrate from water

Nitrate (NO₃^-) is a ubiquitous contaminant in water and wastewater. Conventional treatment processes such as adsorption and membrane separation suffer from low selectivity for NO₃^- removal, causing high energy consumption and adsorbents usage. In this study, we demonstrate selective removal of NO₃^- in an electrosorption process by a thin, porous carbonized eggshell membrane (CESM) derived from eggshell bio-waste. The CESM possesses an interconnected hierarchical pore structure with pore size ranging from a few nanometers to tens of micrometers. When utilized as the anode in an electrosorption process, the CESM exhibited strong selectivity for NO₃^- over Cl^-, SO₄^2-, and H₂PO₄^-. Adsorption of NO₃^- by the CESM reached 2.4 × 10^-3 mmol/m², almost two orders of magnitude higher than that by activated carbon (AC). More importantly, the CESM achieved NO₃^-/Cl^- selectivity of 7.79 at an applied voltage of 1.2 V, the highest NO₃^-/Cl^- selectivity reported to date. The high selectivity led to a five-fold reduction in energy consumption for NO₃^- removal compared to electrosorption using conventional AC electrodes. Density function theory calculation suggests that the high NO₃^- selectivity of CESM is attributed to its rich nitrogen-containing functional groups, which possess higher binding energy with NO₃^- compared to Cl^-, SO₄^2-, and H₂PO₄^-. These results suggest that nitrogen-rich biomaterials are good precursors for NO₃^- selective electrodes; similar chemistry can also be used in other materials to achieve NO₃^- selectivity.

Selective Ion Removal by Capacitive Deionization (CDI)-Based Technologies

Severe freshwater shortages and global pollution make selective removal of target ions from solutions of great significance for water purification and resource recovery. Capacitive deionization (CDI) removes charged ions and molecules from water by applying a low applied electric field across the electrodes and has received much attention due to its lower energy consumption and sustainability. Its application field has been expanding in the past few years. In this paper, we report an overview of the current status of selective ion removal in CDI. This paper also discusses the prospects of selective CDI, including desalination, water softening, heavy metal removal and recovery, nutrient removal, and other common ion removal techniques. The insights from this review will inform the implementation of CDI technology.

Electrode for selective bromide removal in membrane capacitive deionisation

Due to the shortage of freshwater around the world, seawater is becoming an important water source. However, seawater contains a high concentration of bromide that can form harmful disinfection by-products during water disinfection. Therefore, the current seawater reverse osmosis (SWRO) has to adopt two-pass reverse osmosis (RO) configuration for effective bromide removal, increasing the overall desalination cost. In this study, a bromide selective composite electrode was developed for membrane capacitive deionisation (MCDI). The composite electrode was developed by coating a mixture of bromide selective resin and anion exchange polymer on the surface of the commercial activated carbon electrode, and its performance was compared to that of conventional carbon electrode. The results demonstrated that the composite electrode has ten times better bromide selectivity than the conventional carbon electrode. The study shows the potential application of MCDI for the selective removal of target ions from water sources and the potential for resource recovery through basic modification of commercial electrode.

Tracing riverine sulfate source in an agricultural watershed: Constraints from stable isotopes

The sulfate pollution in water environment gains more and more concerns in recent years. The discharge of domestic, municipal, and industrial wastewaters increases the riverine sulfate concentrations, which may cause local health and ecological problems. To better understand the sources of sulfate, this study collected water samples in a typical agricultural watershed in East Thailand. The source apportionment of sulfide was conducted by using stable isotopes and receptor models. The δ³⁴S_SO4 value of river water varied from 1.2‰ to 16.4‰, with a median value of 8.9‰. The hydrochemical data indicated that the chemical compositions of Mun river water were affected by the anthropogenic inputs and natural processes such as halite dissolution, carbonate, and silicate weathering. The positive matrix factorization (PMF) model was not suitable to trace source of riverine sulfate, because the meaning of the extracted factors seems to be vague. Based on the elemental ratio and isotopic composition, the inverse model yielded the relative contribution of sulfide oxidation (approximately 46.5%), anthropogenic input (approximately 41.5%), and gypsum dissolution (approximately 12%) to sulfate in Mun river water. This study indicates that the selection of models for source apportionment should be careful. The large contribution of anthropogenic inputs calls an urgent concern of the Thai government to establish effective management strategies in the Mun River basin.

Enhanced electrosorption selectivity of phosphate using an anion-exchange resin-coated activated carbon electrode

Regenerable methods for phosphate (P) recycling have received intense attention due to their potential environmental and economic benefits. In this study, to improve the electrosorptive removal of P in membrane capacitive deionization, an activated carbon (AC) electrode was coated with a heterogeneous anion-exchange resin layer, and named the AE-AC composite electrode. It was shown that the AE-AC electrode exhibited a good capacitive behavior for electrical double-layer charging. The batch-mode experiments indicted that when the solution pH changed from 5 to 8, the predominant P species shifted from monovalent H₂PO₄^- to divalent HPO₄^2- that was preferentially electroadsorbed for competitive electrosorption with Cl^-. Importantly, the AE-AC composite electrode significantly increased the selectivity coefficient of P over Cl^- to 0.56 that was 2.24-fold greater than that of the uncoated AC electrode, at 1.2 V in single-pass mode operation. This improvement can be ascribed to the preferential transport of P through the thin coating layer containing quaternary amine functional groups. The permselectivity of the coating also significantly increased the electrosorption capacity of P from 0.031 to 0.101 mmol/g with a high charge efficiency (97%) by the reduction in the co-ion repulsion effect. When the reverse voltage (-1.2 V) was applied, electroadsorbed P was reversibly desorbed from the AE-AC electrode in repeated operation. This work suggests that coating an anion-exchange resin layer on the surface of a carbon electrode shows great potential to improve the selective removal of P through electrosorption.

Flow Electrode Capacitive Deionization (FCDI): Recent Developments, Environmental Applications, and Future Perspectives

With the increasing severity of global water scarcity, a myriad of scientific activities is directed toward advancing brackish water desalination and wastewater remediation technologies. Flow-electrode capacitive deionization (FCDI), a newly developed electrochemically driven ion removal approach combining ion-exchange membranes and flowable particle electrodes, has been actively explored over the past seven years, driven by the possibility of energy-efficient, sustainable, and fully continuous production of high-quality fresh water, as well as flexible management of the particle electrodes and concentrate stream. Here, we provide a comprehensive overview of current advances of this interesting technology with particular attention given to FCDI principles, designs (including cell architecture and electrode and separator options), operational modes (including approaches to management of the flowable electrodes), characterizations and modeling, and environmental applications (including water desalination, resource recovery, and contaminant abatement). Furthermore, we introduce the definitions and performance metrics that should be used so that fair assessments and comparisons can be made between different systems and separation conditions. We then highlight the most pressing challenges (i.e., operation and capital cost, scale-up, and commercialization) in the full-scale application of this technology. We conclude this state-of-the-art review by considering the overall outlook of the technology and discussing areas requiring particular attention in the future.

Selective Capacitive Removal of Pb2+ from Wastewater over Redox-Active Electrodes

Water pollution has become an environmental hazard. Diverse metal cations exist in wastewater; lead is the most common heavy metal pollutant among them. Selective removal of highly toxic and ultradiluted lead ions from wastewater is a major challenge for water purification. Here, selective capacitive removal (SCR) of lead ions from wastewater over redox-active molybdenum dioxide/carbon (MoO₂/C) electrodes was developed by an environment-friendly asymmetric capacitive deionization (CDI) method. The MoO₂/C spheres act as cathodes of an asymmetric CDI device and effectively reduce the concentration of Pb²⁺ from 50 ppm to <0.21 ppb. Moreover, the SCR efficiency of lead ions over redox-active MoO₂/C electrodes is >99% in mixtures of 100 ppm Pb(NO₃)₂ and 100 ppm NaCl solutions. In addition, the electrodes exhibit high regeneration performance in mixtures of NaCl and Pb(NO₃)₂ and high SCR efficiency for lead ions from mixtures of heavy metal ions. The tetrahedral structure of the [MoO₄] lattice is shown to be more favorable for the intercalation of lead ions. In situ Raman spectroscopy further shows that the transition of the crystal interface between [MoO₆] and [MoO₄] cluster lattice could be electrochemically controlled during SCR. Therefore, this study provides a new direction for the SCR of lead ions from wastewater.

Predominant Effect of Material Surface Hydrophobicity on Gypsum Scale Formation

Scale formation is an important challenge in water and wastewater treatment systems. However, due to the complex nature of membrane surfaces, the effects of specific membrane surface characteristics on scale formation are poorly understood. In this study, the independent effect of surface hydrophobicity on gypsum (CaSO₄·2H₂O) scale formation via surface-induced nucleation and bulk homogeneous nucleation was investigated using quartz crystal microbalance with dissipation (QCM-D) on self-assembled monolayers (SAMs) terminated with -OH, -CH₃, and -CF₃ functional groups. Results show that higher surface hydrophobicity enhances both surface-induced nucleation of gypsum and attachment of gypsum crystals formed from homogeneous nucleation in the bulk solution. The enhanced surface-induced nucleation is attributed to the lower nucleation energy barrier on a hydrophobic surface, while the increased gypsum crystal attachment results from the favorable hydrophobic interactions between gypsum and more hydrophobic surfaces. Contrary to previous findings, the role of Ca²⁺ adsorption in surface-induced nucleation was found to be relatively small and similar on the different SAMs. Therefore, increasing material hydrophilicity is a potential approach to reduce gypsum scaling.

Faradaic Electrodes Open a New Era for Capacitive Deionization

Capacitive deionization (CDI) is an emerging desalination technology for effective removal of ionic species from aqueous solutions. Compared to conventional CDI, which is based on carbon electrodes and struggles with high salinity streams due to a limited salt removal capacity by ion electrosorption and excessive co-ion expulsion, the emerging Faradaic electrodes provide unique opportunities to upgrade the CDI performance, i.e., achieving much higher salt removal capacities and energy-efficient desalination for high salinity streams, due to the Faradaic reaction for ion capture. This article presents a comprehensive overview on the current developments of Faradaic electrode materials for CDI. Here, the fundamentals of Faradaic electrode-based CDI are first introduced in detail, including novel CDI cell architectures, key CDI performance metrics, ion capture mechanisms, and the design principles of Faradaic electrode materials. Three main categories of Faradaic electrode materials are summarized and discussed regarding their crystal structure, physicochemical characteristics, and desalination performance. In particular, the ion capture mechanisms in Faradaic electrode materials are highlighted to obtain a better understanding of the CDI process. Moreover, novel tailored applications, including selective ion removal and contaminant removal, are specifically introduced. Finally, the remaining challenges and research directions are also outlined to provide guidelines for future research.

A Hybrid Metal-Organic Framework-Reduced Graphene Oxide Nanomaterial for Selective Removal of Chromate from Water in an Electrochemical Process

Hexavalent chromium Cr(VI) is a highly toxic groundwater contaminant. In this study, we demonstrate a selective electrochemical process tailored for removal of Cr(VI) using a hybrid MOF@rGO nanomaterial synthesized by in situ growth of a nanocrystalline, mixed ligand octahedral metal-organic framework with cobalt metal centers, [Co₂(btec)(bipy)(DMF)₂]_n (Co-MOF), on the surface of reduced graphene oxide (rGO). The rGO provides the electric conductivity necessary for an electrode, while the Co-MOF endows highly selective adsorption sites for CrO₄^2-. When used as an anode in the treatment cycles, the MOF@rGO electrode exhibits strong selectivity for adsorption of CrO₄^2- over competing anions including Cl^-, SO₄^2-, and As(III) and achieves charge efficiency (CE) >100% due to the strong physisorption of CrO₄^2- by Co-MOF; both electro- and physisorption capacities are regenerated with the reversal of the applied voltage, when highly toxic Cr(VI) is reduced to less toxic reduced Cr species and subsequently released into brine. This approach allows easy regeneration of the nonconducting Co-MOF without any chemical addition while simultaneously transforming Cr(VI), inspiring a novel electrochemical method for highly selective degradation of toxic contaminants using tailor-designed electrodes with high affinity adsorbents.

Selective Pseudocapacitive Deionization of Calcium Ions in Copper Hexacyanoferrate

In recent years, the capacitive deionization (CDI) technology has gradually become a promising technology for hard water treatment. Up to now, most of the work for water softening in CDI was severely limited by the inferior selectivity and electrosorption performances of carbon-based electrodes in spite of combining Ca²⁺-selective ion-exchange resin or membranes. Pseudocapacitive electrode materials that selectively interact with specific ions by Faradic redox reactions or ion (de)intercalation offer an alternative strategy for highly selective electrosorption of Ca²⁺ from water because of brilliant ion adsorption capacity. Here, we first used copper hexacyanoferrate (CuHCF) as a pseudocapacitive electrode to methodically study the selective pseudocapacitive deionization of Ca²⁺ over Na⁺ and Mg²⁺. Using the hybrid CDI cell consisting of a CuHCF cathode and an activated carbon anode without any ion-exchange membrane, the outstanding Ca²⁺ electrosorption capacity of 42.8 mg·g^-1 and superior selectivity &(Ca²⁺/Na⁺) of 3.05 at a molar ratio of 10:1 were obtained at 1.4 V, surpassing those of the reported carbon-based electrodes. Finally, electrochemical measurements and molecular dynamics (MD) simulations provided an in-depth understanding of the selective pseudocapacitive deionization of Ca²⁺ ions in a CuHCF electrode. Our study would be helpful for developing high-efficiency selective electrosorption of target charged ions by intrinsic properties of pseudocapacitive materials.

Tracking nitrate and sulfate sources in groundwater of an urbanized valley using a multi-tracer approach combined with a Bayesian isotope mixing model

Over the past decades, groundwater quality has deteriorated worldwide by nitrate pollution due to the intensive use of fertilizers in agriculture, release of untreated urban sewage and industrial wastewater, and atmospheric deposition. Likewise, groundwater is increasingly polluted by sulfate due to the release of domestic, municipal and industrial wastewaters, as well as through geothermal processes, seawater intrusion, atmospheric deposition, mineral dissolution, and acid rain. The urbanized and industrialized Monterrey valley has a long record of elevated nitrate and sulfate concentrations in groundwater with multiple potential pollution sources. This study aimed to track different sources and transformation processes of nitrate and sulfate pollution in Monterrey using a suite of chemical and isotopic tracers (δ²H-H₂O, δ¹⁸O-H₂O, δ¹⁵N-NO₃, δ¹⁸O-NO₃ δ³⁴S-SO₄, δ¹⁸O-SO₄) combined with a probability isotope mixing model. Soil nitrogen and sewage were found to be the most important nitrate sources, while atmospheric deposition, marine evaporites and sewage were the most prominent sulfate sources. However, the concentrations of nitrate and sulfate were controlled by denitrification and sulfate reduction processes in the transition and discharge zones. The approach followed in this study is useful for establishing effective pollution management strategies in contaminated aquifers.

Capacitive Deionization of Divalent Cations for Water Softening Using Functionalized Carbon Electrodes

Water softening is a relatively untapped area of research in capacitive deionization (CDI). In this work, we demonstrate how an asymmetric combination of oxidized and aminated carbon can be used for selective removal of divalent cations for water softening. We first show how higher electrosorption performances can be achieved in single-salt experiments involving NaCl, KCl, MgCl2, and CaCl2 before proceeding to multi-salt experiments using different combinations of the four salts. The salt combinations are chosen to investigate one of the three factors: (1) ionic mass, (2) ionic charge, or (3) concentration. We show how divalent selectivity can be achieved due to high local electrostatic attraction between negatively charged oxygen moieties and divalent cations. Additionally, an ion-exchange process between the oxidized carbon surface and cations can result in lower pH values, which prevent the precipitation of scale-forming ions.

Removal of calcium ions from water by selective electrosorption using target-ion specific nanocomposite electrode

Technologies capable of selective removal of target contaminants from water are highly desirable to achieve "fit-for-purpose" treatment. In this study, we developed a simple yet highly effective method to achieve calcium-selective removal in an electrosorption process by coating the cathode with a calcium-selective nanocomposite (CSN) layer using an aqueous phase process. The CSN coating consisted of nano-sized calcium chelating resins with aminophosphonic groups in a sulfonated polyvinyl alcohol hydrogel matrix, which accomplished a Ca²⁺-over-Na⁺ selectivity of 3.5-5.4 at Na⁺:Ca²⁺ equivalent concentration ratio from 10:1 to 1:1, 94 - 184% greater than the uncoated electrode. The CSN coated electrode exhibited complete reversibility in repeated operation. Mechanistic studies suggested that the CSN coating did not contribute to the adsorption capacity, but rather allowed preferential permeation of Ca²⁺ and hence increased Ca²⁺ adsorption on the carbon cathode. The CSN-coated electrode was very stable, showing reproducible performance in 60 repeated cycles.

Mechanism of Selective Ion Removal in Membrane Capacitive Deionization for Water Softening

Capacitive deionization (CDI) is an emerging technology capable of selective removal of ions from water. While many studies have reported chemically tailored electrodes for selective ion removal, the selective removal of divalent cations (i.e., hardness) over monovalent cations can simply be achieved using membrane CDI (MCDI) equipped with ion exchange membranes (IEMs). In this study, we use both experimental and modeling approaches to systematically investigate the selective removal of Ca²⁺ over Na⁺. Specifically, the impacts of current density, hydraulic retention time, and feed composition on the selectivity of Ca²⁺ over Na⁺ were investigated. The results from our study suggest a universal correlation between the ratio of molar fluxes and the ratio of spacer channel ion concentrations, regardless of operating conditions and feed composition. Our analysis also reveals inherent and universal trade-off relationships between selectivity and the Ca²⁺ removal rate and between selectivity and the degree of Ca²⁺ removal. This fundamental understanding of the mechanism of selective ion removal in MCDI can also be applied to flow-electrode CDI processes that employ IEMs.

Various cell architectures of capacitive deionization: Recent advances and future trends

Substantial consumption and widespread contamination of the available freshwater resources necessitate a continuing search for sustainable, cost-effective and energy-efficient technologies for reclaiming this valuable life-sustaining liquid. With these key advantages, capacitive deionization (CDI) has emerged as a promising technology for the facile removal of ions or other charged species from aqueous solutions via capacitive effects or Faradaic interactions, and is currently being actively explored for water treatment with particular applications in water desalination and wastewater remediation. Over the past decade, the CDI research field has progressed enormously with a constant spring-up of various cell architectures assembled with either capacitive electrodes or battery electrodes, specifically including flow-by CDI, membrane CDI, flow-through CDI, inverted CDI, flow-electrode CDI, hybrid CDI, desalination battery and cation intercalation desalination. This article presents a timely and comprehensive review on the recent advances of various CDI cell architectures, particularly the flow-by CDI and membrane CDI with their key research activities subdivided into materials, application, operational mode, cell design, Faradaic reactions and theoretical models. Moreover, we discuss the challenges remaining in the understanding and perfection of various CDI cell architectures and put forward the prospects and directions for CDI future development.