Molecular-Level Characterization of Oil-Soluble Ketone/Aldehyde Photo-Oxidation Products by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Reveals Similarity Between Microcosm and Field Samples

Ultrahigh-Resolution Mass Spectrometry Advances for Biogeochemical Analysis: From Seafloor Sediments to Petroleum and Marine Oil Spills

This Perspective explores the transformative impact of ultrahigh-resolution mass spectrometry (UHR-MS), particularly Fourier transform ion cyclotron resonance (FT-ICR-MS), in the characterization of complex environmental and petroleum samples. UHR-MS has significantly advanced our ability to identify molecular formulas in complex mixtures, revolutionizing the study of biogeochemical processes and organic matter evolution on wide time scales. We start by briefly reviewing the main technological advances of UHR-MS in the context of petroleum and environmental applications, highlighting some of the challenges of the technology such as quantitation and structural identification. We then showcase a selection of impactful applications published in the last 20+ years. In the field of environmental lipidomics, high-resolution analysis of lipids in sediments enables multiproxy studies and provides novel insights into past environmental conditions. UHR-MS has also facilitated the characterization of kerogen, a complex, poorly soluble mixture formed from sedimented organic matter over geological time scales, and the identification of polar compounds within its fractions. In petroleum (geo)chemistry, UHR-MS has enabled the identification of biomarkers such as petroporphyrins, asphaltenes, and high-molecular-weight naphthenic acids, shedding light on the molecular complexity of crude oil. The application of UHR-MS in oil spill science has revealed significant molecular transformations during weathering processes, such as photo-oxidation, which are crucial for assessing the environmental impact of past spills and improving the preparedness for future spills. These advancements underscore the role of this maturing analytical technology in deepening our understanding of geochemical processes and biogeochemical cycles, highlighting its potential for future research directions in organic geochemistry.

Assessment of Accelerated Aging Effect of Bio-Oil Fractions Utilizing Ultrahigh-Resolution Mass Spectrometry and k-Means Clustering of van Krevelen Compositional Space

Bio-oils contain a substantial number of highly oxygenated hydrocarbons, which often exhibit low thermal stability during storage, handling, and refining. The primary objectives of this study are to characterize the hydroxyl group in bio-oil fractions and to investigate the relationship between the type of hydroxyl group and accelerated aging behavior. A bio-oil was fractionated into five solubility-based fractions, classified in two main groups: water-soluble and water-insoluble fractions. These fractions were then subjected to chemoselective reactions to tag molecules containing hydroxyl groups and analyzed by negative-ion electrospray ionization 21 T Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). The fractions were also subjected to accelerated aging experiments and characterized by FT-ICR MS and bulk viscosity measurements. Extracting insightful information from ultrahigh-resolution data to aid in predicting upgrading methodologies and instability behaviors of bio-oils is challenging due to the complexity of the data. To address this, an unsupervised learning technique, k-means clustering analysis, was used to semiquantify molecular compositions with a close Euclidean distance within the (O/C, H/C) chemical space. The combination of k-means analysis with findings from chemoselective reactions allowed the distinctive hydroxyl functionalities across the samples to be inferred. Our results indicate that the hexane-soluble fraction contained numerous molecules containing primary and secondary alcohols, while the water-soluble fraction displayed diverse groups of oxygenated compounds, clustered near to carbohydrate-like and pyrolytic humin-like materials. Despite its high oxygen content, the water-soluble fraction showed minimal changes in viscosity during aging. In contrast, a significant increase in viscosity was observed in the water-insoluble materials, specifically, the low- and high-molecular-weight lignin fractions (LMWL and HMWL, respectively). Among these two fractions, the HMWL exhibited the highest increase in viscosity after only 4 h of accelerated aging. Our results indicate that this aging behavior is attributed to an increased number of molecular compositions containing phenolic groups. Thus, the chemical compositions within the HMWL are the major contributors to the viscosity changes in the bio-oil under accelerated aging conditions. This highlights the crucial role of oxygen functionality in bio-oil aging, suggesting that a high oxygen content alone does not necessarily correlate with an increase of viscosity. Unlike other bio-oil categorization methods based on constrained molecule locations within the van Krevelen compositional space, k-means clustering can identify patterns within ultrahigh-resolution data inherent to the unique chemical fingerprint of each sample.

Unravelling structural features of small molecules for photochemical transformation of environmental contaminants

Small molecules, including natural metabolites, organic matter decomposition products, and engineered oxidation byproducts, are widespread in aquatic environment. However, the limited understanding of the photochemical interactions of these small molecules with water pollutants hampers the development of effective environmental protection strategies. This study explores the structural features governing the photochemical transformation of toxic oxyanions by α- and β-dicarbonyl compounds. By integrating experimental observations with quantum chemical calculations, a robust correlation network was constructed. The correlation network reveals that the reactivity of small organic molecules with oxyanions could be quantitively predicted by their intrinsic properties, such as electronic transition energy, bond dissociation energy, molecular softness, molecular orbital gap, atomic charge, and molecular surface local ionization energy. This network maps the relationship between the molecular architecture of chemicals and their photochemical behaviors. This perspective offers fresh insights into the photochemical behaviors of small molecules in diverse environmental and chemical contexts and are helpful for developing advanced water treatment strategies toward a sustainable future.

Effects of burning and photochemical degradation of Macondo surrogate oil on its composition and toxicity

Petroleum products in the environment can produce significant toxicity through photochemically driven processes. Burning surface oil and photochemical degradation were two mechanisms for oil removal after the Deepwater Horizon (DWH) oil spill in the Gulf of Mexico. After burning, residual oil remains in the environment and may undergo further weathering, a poorly understood fate. Although photochemistry was a major degradation pathway of the DWH oil, its effect on burned oil residue in the environment is under studied. Here, we ignited Macondo surrogate crude oil and allowed it to burn to exhaustion. Water-accommodated fractions (WAFs) of the burn residue were created in full sunlight to determine the effects of photochemical weathering on the burned oil residue. Our findings show that increased dissolved organic carbon concentrations (DOC) for the light unburned and light burned after sunlight exposure positively correlated to decreased microbial growth and production inhibition (i.e. more toxic) when compared to the dark controls. Optical and molecular analytical techniques were used to identify the classes of compounds contributing to the toxicity in the dark and light burned and dark and light unburned WAFs. After light exposure, the optical composition between the light unburned and light burned differed significantly (p < 0.05), revealing key fluorescence signatures commonly identified as crude oil degradation products. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) analysis showed more condensed aromatic, reduced oxygenated compounds present in the light burned than in the light unburned. FT-ICR MS also showed an increase in the percent relative abundance of carboxyl-rich alicyclic molecules (CRAM) like compounds in the light burned compared to light unburned. The increase in CRAM suggests that the composition of the light burned is more photorefractory, i.e., reduced, explaining the residual toxicity observed in microbial activity. Overall, these data indicate burning removes some but not all toxic compounds, leaving behind compounds which retain considerable toxicity. This study shows that burn oil residues are photolabile breaking down further into complex reduced compounds.

Photochemistry of oil in marine systems: developments since the Deepwater Horizon spill

Oil spills represent a major source of negative environmental impacts in marine systems. Despite many decades of research on oil spill behavior, photochemistry was neglected as a major factor in the fate of oil spilled in marine systems. Subsequent to the Deepwater Horizon oil spill, numerous studies using varied approaches have demonstrated the importance of photochemistry, including short-term impacts (hours to days) that were previously unrecognized. These studies have demonstrated the importance of photochemistry in the overall oil transformation after a spill and more specifically the impacts on emulsification, oxygenation, and microbial interactions. In addition to new perspectives, advances in analytical approaches have allowed an improved understanding of oil photochemistry after maritime spill. Although the literature on the Deepwater Horizon spill is extensive, this review focuses only on studies relevant to the advances in oil photochemistry understanding since the Deepwater Horizon spill.

Marine oil spill photodegradation: Laboratory simulation, affecting factors analysis and kinetic model development

Photodegradation significantly influences marine oil spill behavior, yet its role remains underrepresented in current models, impairing predictive accuracy. Addressing this, our study rigorously examined oil properties and environmental determinants affecting marine oil spill photodegradation through laboratory simulations. We identified and quantified key factors and their interactions, noting particularly the positive influence of asphaltene and negative implications of oil density. We also discerned a negative correlation between n-alkane degradation and carbon numbers. Our findings underscored the pivotal roles of temperature and irradiance in photodegradation. All tested oils adhered to first-order kinetics, with rate constants ranging from 0.0348 to 0.0645 day-1. Finally, we introduced a novel model incorporating temperature, irradiance and their interactions, ensuring reasonable simulations for marine oil spill photodegradation, fortifying marine oil spill management strategies.

Assessing the effects of sunlight and water on asphalt binder and pavement leachability related to the environment

Extensive global research conducted over 30 years explores asphalt leachability and stormwater runoff. Asphalt's widespread usage in construction materials underscores the importance of understanding its environmental consequences. This study aims to assess the influence of sunlight exposure on water quality, particularly regarding the release of hazardous organic compounds such as polycyclic aromatic compounds. We investigated the effect of concurrent versus sequential exposure to water and sunlight, and dark versus light trials utilizing thin films of asphalt binder as well as old and freshly prepared pavement cores for analysis. Initial laboratory experiments reveal significant water-soluble species when thin asphalt films are exposed to solar simulation while underwater. However, simulating environmental conditions found in roadways by exposing the asphalt binder to solar simulation followed by water immersion leads to a substantial decrease in compound formation. Leachate water from 17-year-old asphalt and 15-year-old concrete pavements exhibits complex compound compositions associated with atmospheric and/or vehicular deposition, posing challenges in deconvoluting their origins. Light and dark trials conducted on freshly prepared asphalt pavement under environmental conditions of sunlight and rain demonstrate minimal runoff variation, with semi-volatile organic compound levels resembling the background. Future investigations will focus on applying insights gained from this study to analyze larger sample sets, with an emphasis on inherent hazardous compound variations.

Chemoselective derivatisation and ultrahigh resolution mass spectrometry for the determination of hydroxyl functional groups within complex bio-oils

Bio-oils are a renewable alternative resource for the production of fine chemicals and fuels. Bio-oils are characterised by a high content of oxygenated compounds with a diverse array of different chemical functionalities. Here, we performed a chemical reaction to transform the hydroxyl group of the various components in a bio-oil prior to characterisation with ultrahigh resolution mass spectrometry (UHRMS). The derivatisations were first evaluated using twenty lignin-representative standards with different structural features. Our results indicate a highly chemoselective transformation of the hydroxyl group despite the presence of other functional groups. Mono- and di-acetate products were observed in acetone-acetic anhydride (acetone-Ac₂O) mixtures for non-sterically hindered phenols, catechols and benzene diols. Dimethyl sulfoxide-Ac₂O (DMSO-Ac₂O) reactions favoured the oxidation of primary and secondary alcohols and the formation of methylthiomethyl (MTM) products of phenols. The derivatisations were then performed in a complex bio-oil sample to gain insights into the hydroxyl group profile of the bio-oil. Our results indicate that the bio-oil before derivatisation is composed of 4500 elemental compositions containing 1-12 oxygen atoms. After the derivatisation in DMSO-Ac₂O mixtures, the total number of compositions increased approximately five-fold. The reaction was indicative of the variety of hydroxyl group profiles within the sample in particular the presence of phenols that were ortho and para substituted, non-hindered phenols (about 34%), aromatic alcohols (including benzylic and other non-phenolic alcohols) (25%), and aliphatic alcohols (6.3%) could be inferred. Phenolic compositions are known as coke precursors in catalytic pyrolysis and upgrading processes. Thus, the combination of chemoselective derivatisations in conjunction with UHRMS can be a valuable resource to outline the hydroxyl group profile in elemental chemical compositions in complex mixtures.

Recommendations for advancing test protocols examining the photo-induced toxicity of petroleum and polycyclic aromatic compounds

Photo-induced toxicity of petroleum products and polycyclic aromatic compounds (PACs) is the enhanced toxicity caused by their interaction with ultraviolet radiation and occurs by two distinct mechanisms: photosensitization and photomodification. Laboratory approaches for designing, conducting, and reporting of photo-induced toxicity studies are reviewed and recommended to enhance the original Chemical Response to Oil Spills: Ecological Research Forum (CROSERF) protocols which did not address photo-induced toxicity. Guidance is provided on conducting photo-induced toxicity tests, including test species, endpoints, experimental design and dosing, light sources, irradiance measurement, chemical characterization, and data reporting. Because of distinct mechanisms, aspects of photosensitization (change in compound energy state) and photomodification (change in compound structure) are addressed separately, and practical applications in laboratory and field studies and advances in predictive modeling are discussed. One goal for developing standardized testing protocols is to support lab-to-field extrapolations, which in the case of petroleum substances often requires a modeling framework to account for differential physicochemical properties of the constituents. Recommendations are provided to promote greater standardization of laboratory studies on photo-induced toxicity, thus facilitating comparisons across studies and generating data needed to improve models used in oil spill science.

Complex Mixture Analysis of Emerging Contaminants Generated from Coal Tar- and Petroleum-Derived Pavement Sealants: Molecular Compositions and Correlations with Toxicity Revealed by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry

Pavement sealants are of environmental concern because of their complex petroleum-based chemistry and potential toxicity. Specifically, coal tar-derived sealants contain high concentrations of toxic/carcinogenic polycyclic aromatic hydrocarbons (PAHs) that, when weathered, can be transferred into the surrounding environment. Previous studies have demonstrated the effects of coal tar sealants on PAH concentration in nearby waterways and their harmful effects in aquatic ecosystems. Here, we investigate and compare the molecular composition of two different pavement sealants, petroleum asphalt- and coal tar-derived, and their photoproducts, by positive-ion (+) atmospheric pressure photoionization (APPI) and negative-ion (-) electrospray ionization (ESI) coupled with ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry to address species (high-boiling and/or high oxygen content) that lie outside the analytical window of other techniques due to ultra-high molecular complexity. In addition, we evaluate the toxicity of the water-soluble photoproducts by use of Microtox bioassay. The results demonstrate that the coal tar sealant contains higher amounts of PAHs and produces abundant water-soluble compounds, relative to unweathered materials, with a high abundance of PAH-like molecules of high toxicity. By comparison, the asphalt sealant produces fewer toxic water-soluble species, with molecular compositions that are consistent with natural dissolved organic matter. These results capture the mass, chemical diversity, toxicity, and source/photoproduct relationship of these compositionally complex emerging contaminants from the built environment.

Oil Irradiation Experiments Document Changes in Oil Properties, Molecular Composition, and Dispersant Effectiveness Associated with Oil Photo-Oxidation

While chemical dispersants are a powerful tool for treating spilled oil, their effectiveness can be limited by oil weathering processes such as evaporation and emulsification. It has been suggested that oil photo-oxidation could exacerbate these challenges. To address the role of oil photo-oxidation in dispersant effectiveness, outdoor mesocosm experiments with crude oil on seawater were performed. Changes in bulk oil properties and molecular composition were quantified to characterize oil photo-oxidation over 11 days. To test relative dispersant effectiveness, oil residues were evaluated using the Baffled Flask Test. The results show that oil irradiation led to oxygen incorporation, formation of oxygenated hydrocarbons, and higher oil viscosities. Oil irradiation was associated with decreased dispersant efficacy, with effectiveness falling from 80 to <50% in the Baffled Flask Test after more than 3 days of irradiation. Increasing photo-oxidation-induced viscosity seems to drive the decreasing dispersant effectiveness. Comparing the Baffled Flask Test results with field data from the Deepwater Horizon oil spill showed that laboratory dispersant tests underestimate the dispersion of photo-oxidized oil in the field. Overall, the results suggest that prompt dispersant application (within 2-4 days), as recommended by current oil spill response guidelines, is necessary for effective dispersion of spilled oil.

Changes in Chemical Composition and Copepod Toxicity during Petroleum Photo-oxidation

Photoproducts can be formed rapidly in the initial phase of a marine oil spill. However, their toxicity is not well understood. In this study, oil was irradiated, chemically characterized, and tested for toxicity in three copepod species (Acartia tonsa, Temora longicornis, and Calanus finmarchicus). Irradiation led to a depletion of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes in oil residues, along with an enrichment in aromatic and aliphatic oil photoproducts. Target lipid model-based calculations of PAH toxicity units predicted that PAH toxicities were lower in water-accommodated fractions (WAFs) of irradiated oil residues ("irradiated WAFs") than in WAFs of dark-control samples ("dark WAFs"). In contrast, biomimetic extraction (BE) measurements showed increased bioaccumulation potential of dissolved constituents of irradiated WAFs compared to dark WAFs, mainly driven by photoproducts present in irradiated oil. In line with the BE results, copepod mortality increased in irradiated WAFs compared to dark WAFs. However, low copepod toxicities were observed for WAFs produced with photo-oxidized oil slicks collected during the Deepwater Horizon oil spill. The results of this study suggest that while oil photoproducts have the potential to be a significant source of copepod toxicity, dilution and dispersion of these higher solubility products appear to help mitigate their toxicity at sea.

Time-dependent molecular progression and acute toxicity of oil-soluble, interfacially-active, and water-soluble species reveals their rapid formation in the photodegradation of Macondo Well Oil

Photodegradation is a significant weathering process that transforms spilled oil, yet, the fate, degradation rate, and molecular transformations that occur through photoinduced pathways remain relatively unknown. The molecular complexity combined with the increased polarity of photoproducts challenges conventional analytical techniques. Here, we catalogue the molecular progression of photochemical transformation products of Macondo Well Oil by negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). We track the molecular compositions of oil-soluble, interfacially-active, and water-soluble oil species formed at varying time intervals in photomicrocosm experiments. Short photoirradiation periods (<24 h), not previously reported, are included to reveal rapid photooxidation of native oil components. Surface oil films exposed to solar irradiation were shown to increasingly contribute to the dissolved organic carbon pool as a function of increased irradiation time. FT-ICR MS analysis of acidic species of each fraction identifies tens of thousands of oil-soluble, interfacially-active, and water-soluble phototransformation products, including O_x, NO_x, and SO_x species. Oil-soluble species incorporate oxygen as a function of irradiation periods. After 96 h of irradiation, ~14 wt% of the photooxidized oil film was interfacially active and contained phototransformed species with up to 12 oxygen atoms per molecule. Water-soluble species correspond to highly oxygenated compounds. Importantly, photochemical oxidation is shown to occur within the first hour. Beyond 24 h, photoproducts remain compositionally similar, highlighting the rapid effect of photodegradation to transform oil species into water-soluble compounds. Molecular fingerprints provided by FT-ICR MS highlight the oxygen dependence on oil/water solubility. Microtox® analysis indicates that the toxicity of water-soluble photoproducts rapidly increases at early irradiation time points (first 24 h) compared to the dark control and reaches a maximum at 6 h of irradiation. Results highlight the temporal, molecular progression of photoproducts as they partition from oil-soluble to oil-soluble interfacially-active, and finally to water-soluble species.

Advances in Chemical Analysis of Oil Spills Since the Deepwater Horizon Disaster

Analytical techniques for chemical analysis of oil, oil photochemical and biological transformation products, and dispersants and their biodegradation products benefited significantly from research following the 2010 Deepwater Horizon (DWH) disaster. Crude oil and weathered-oil matrix reference materials were developed based on the Macondo well oil and characterized for polycyclic aromatic hydrocarbons, hopanes, and steranes for use to assure and improve the quality of analytical measurements in oil spill research. Advanced gas chromatography (GC) techniques such as comprehensive two-dimensional GC (GC × GC), pyrolysis GC with mass spectrometry (MS), and GC with tandem MS (GC-MS/MS) provide a greater understanding at the molecular level of composition and complexity of oil and weathering changes. The capabilities of high-resolution MS (HRMS) were utilized to extend the analytical characterization window beyond conventional GC-based methods to include polar and high molecular mass components (>400 Da) and to provide new opportunities for discovery, characterization, and investigation of photooxidation and biotransformation products. Novel separation approaches to reduce the complexity of the oil and weathered oil prior to high-resolution MS and advanced fluorescence spectrometry have increased the information available on spilled oil and transformation products. HRMS methods were developed to achieve the required precision and sensitivity for detection of dispersants and to provide molecular-level characterization of the complex surfactants. Overall, research funding following the DWH oil spill significantly advanced and expanded the use of analytical techniques for chemical analysis to support petroleum and dispersant characterization and investigations of fate and effects of not only the DWH oil spill but future spills.

Natural attenuation of oil in marine environments: A review

Natural attenuation is an important process for oil spill management in marine environments. Natural attenuation affects the fate of oil by physical, chemical, and biological processes, which include evaporation, dispersion, dissolution, photo-oxidation, emulsification, oil particle aggregation, and biodegradation. This review examines the cumulative knowledge regarding these natural attenuation processes as well as their simulation and prediction using modelling approaches. An in-depth discussion is provided on how oil type, microbial community and environmental factors contribute to the biodegradation process. It describes how our understanding of the structure and function of indigenous oil degrading microbial communities in the marine environment has been advanced by the application of next generation sequencing tools. The synergetic and/or antagonist effects of oil spill countermeasures such as the application of chemical dispersants, in-situ burning and nutrient enrichment on natural attenuation were explored. Several knowledge gaps were identified regarding the synergetic and/or antagonistic effects of active response countermeasures on the natural attenuation/biodegradation process. This review highlighted the need for field data on both the effectiveness and potential detrimental effects of oil spill response options to support modelling and decision-making on their selection and application.

Expanding the Analytical Window for Biochar Speciation: Molecular Comparison of Solvent Extraction and Water-Soluble Fractions of Biochar by FT-ICR Mass Spectrometry

Biochar, a low-density yet carbon-rich material derived from different organic materials pyrolyzed under low or no oxygen conditions, has been widely studied as a soil amendment, for greenhouse gas mitigation and in remediation of trace element-contaminated soils. Molecular speciation of biochar compounds has been challenging due to low solubility, aggregation, and immense compositional polydispersity that challenges nearly all mass spectrometry methods routinely applied to carbon-based organic materials. Through a combined technique approach that applies advanced analytical strategies, we provide bulk and molecular characterization of Kentucky bluegrass biochar that can be applied to any biomass or biochar sample. First, we characterize Kentucky bluegrass biochar chemical functional groups by solid-state magic-angle spinning dynamic nuclear polarization NMR (MAS-DNP NMR) and resolve aromatic and aliphatic signals from the pyrogenic material and intact plant material. Next, we isolate water-soluble biochar species by solid-phase extraction followed by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and identify highly polar, oxygen species across a wide carbon number range. Solvent fractionation of biochar further expands the compositional range and identifies condensed polycyclic aromatic species across nonpolar and polar classes detected by two ionization modes (-ESI and +APPI) by FT-ICR MS. Plotting biochar species with DBE versus carbon number highlights the pericondensed molecular structural motif that persists across numerous heteroatom classes and ionization modes. To the best of our knowledge, this is the first molecular level identification of nonfunctionalized PAHs in biochar extracts by APPI FT-ICR MS. Thus, we identify biochar species that span the same compositional space as coal, heavy oil asphaltenes, and coal tar and correspond to condensed ring PAHs.

Persistence and photochemical transformation of water soluble constituents from industrial crude oil and natural seep oil in seawater

The persistence and transformation of water soluble chemical constituents derived from surface oil from the 2015 Refugio Oil Spill and from a nearby natural seep were evaluated under simulated sunlight conditions. Photoirradiation resulted in enhanced oil slick dissolution, which was more pronounced in spill oil compared to seep oil. Nontargeted analysis based on GC × GC/TOF-MS revealed that photoirradiation promoted oil slick dissolution, and more water soluble compounds were released from spill oil (500 compounds) than from seep oil (180 compounds), most of them (488 in spill oil and 150 in seep oil) still persisting in solution after 67 days of photoirradiation. First-order degradation rate coefficients of humic-like water soluble constituents were found to be 0.26 day^-1 and 0.29 day^-1 for irradiated spill and seep samples, respectively. The decreases in humic-like fluorescence, specific UV absorbance, and aromatic compounds without corresponding decreases in DOC concentration support indirect photochemical transformation in addition to complete photomineralization.

Molecular Comparison of Solid-Phase Extraction and Liquid/Liquid Extraction of Water-Soluble Petroleum Compounds Produced through Photodegradation and Biodegradation by FT-ICR Mass Spectrometry

We apply two widely used extraction techniques, liquid/liquid extraction and solid-phase extraction with styrene-divinylbenzene polymer with a proprietary nonpolar surface priority pollutant (PPL) to water-soluble compounds generated through photodegradation and biodegradation of petroleum. We compare the molecular composition of bio- and photodegraded water-soluble organic (WSO) acids by 21 T negative-ion electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). We highlight the compositional differences between the two extraction techniques for abiotic and biotic degradation processes and identify known toxic species (naphthenic acids) produced through hydrocarbon biodegradation identified by liquid/liquid extraction (LLE) that are not detected with solid-phase extraction (SPE) of the same sample. Photodegraded WSO compounds extracted by SPE-PPL correspond to species with higher O/C ratio and carbon number compared to LLE extracted compounds. Naphthenic acids, a recalcitrant class of nonaromatic carboxylic acids and known acute toxicants formed through biodegradation of oil, are detected in LLE extracts (up to C₃₀ and double-bond equivalents, DBE < 3) but are not detected in SPE-PPL extracts. This suggests that LLE and SPE-PPL retain different water-soluble oil species based on the dominant type of oil weathering process.

Monitoring chemical compositional changes of simulated spilled Brazilian oils under tropical climate conditions by multiple analytical techniques

To comprehensively understand the chemical changes over time of spilled oils subject to tropical climate conditions and the active weathering processes, a spill simulation experiment was conducted along 210 days with two distinct Brazilian oils (19 and 24 API) under irradiation and non-irradiation of sunlight. Isoprenoids and n-alkanes showed a great loss after 40 days for both oils under the two conditions due to evaporation. Diagnostic ratios of saturated biomarkers showed no changes, whereas the polycyclic aromatic hydrocarbons had a decreasing concentration under both conditions mainly due to evaporation. Furthermore, oxygenated polar compounds produced by photooxidation were investigated by ESI(-) FT-ICR MS and showed changes only for the oils exposed to sunlight irradiation. Based on the observed polar compositional changes, new parameters are suggested using heteroatom classes to estimate oil spill time under tropical conditions: NO₃/NO₂; NO₃/(NO + NO₂); ∑NO_x/N₁; (O₄ + O₃)/(O₂ + O₁); O₄/(O₂ + O₁); and O₃/O₂.

Progress in Operational Modeling in Support of Oil Spill Response

Following the 2010 Deepwater Horizon accident of a massive blow-out in the Gulf of Mexico, scientists from government, industry, and academia collaborated to advance oil spill modeling and share best practices in model algorithms, parameterizations, and application protocols. This synergy was greatly enhanced by research funded under the Gulf of Mexico Research Initiative (GoMRI), a 10-year enterprise that allowed unprecedented collection of observations and data products, novel experiments, and international collaborations that focused on the Gulf of Mexico, but resulted in the generation of scientific findings and tools of broader value. Operational oil spill modeling greatly benefited from research during the GoMRI decade. This paper provides a comprehensive synthesis of the related scientific advances, remaining challenges, and future outlook. Two main modeling components are discussed: Ocean circulation and oil spill models, to provide details on all attributes that contribute to the success and limitations of the integrated oil spill forecasts. These forecasts are discussed in tandem with uncertainty factors and methods to mitigate them. The paper focuses on operational aspects of oil spill modeling and forecasting, including examples of international operational center practices, observational needs, communication protocols, and promising new methodologies.

Role of Molecular Structure in the Production of Water-Soluble Species by Photo-oxidation of Petroleum

Asphaltenes are high-boiling and recalcitrant compounds that are generally minor components of crude oil (∼0.1-15.0 wt %) but dominate the composition of heavily weathered spilled petroleum. These solid residues exhibit a high structural complexity, comprised of polycyclic aromatic hydrocarbons (PAHs) that are a mixture of single-core (island) and multicore (archipelago) structural motifs. The mass fraction of each motif is sample-dependent. Thus, knowledge of a potential structural dependence (single- versus multicore) on the production of water-soluble species from asphaltene samples is key to understanding the contribution of photochemically generated dissolved organic matter from oil spills. In this work, asphaltene samples with enriched mass fractions of either island (single-core) or archipelago (multicore) structural motifs are photo-oxidized on artificial seawater by the use of a solar simulator. Molecular characterization of oil- and water-soluble photoproducts, conducted by Fourier transform ion cyclotron resonance mass spectrometry, reveals that island motifs exhibit very limited production of water-soluble species, and their oil-soluble products reflect the molecular composition of the starting material. Conversely, archipelago motifs yield a water-soluble compositional continuum of O_x, S_xO_y, and N_xO_y containing hydrocarbons species that exhibit the typical molecular fingerprint of dissolved organic matter (DOM). The lower carbon number and aromaticity of the archipelago-derived asphaltene photoproducts suggest the occurrence of photofragmentation (or photolysis) reactions. To investigate the possibility of the opposite reaction (photopolymerization), the photo-oxidation of small PAHs isolated from a low-boiling petroleum distillation cut was also performed. It yielded water-soluble compounds with carbon number and aromaticity up to 2-fold higher than the starting material, strongly suggesting that polymerization (addition reactions) occurs. Collectively, the results indicate that the presence of archipelago motifs and the occurrence of cracking/polymerization reactions are central in the production of dissolved organic matter from fossil fuels.

Characterization of an Asphalt Binder and Photoproducts by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Reveals Abundant Water-Soluble Hydrocarbons

Road asphalt is comprised of aggregate (rocks) mixed with a binder composed of high-boiling petroleum-derived compounds, which have been thought to be relatively inert (unreactive) and thus leach small amounts of polyaromatic hydrocarbons (PAHs) into water from the built environment. However, recent studies have demonstrated that petroleum readily undergoes photooxidation and generates water-soluble oxygen-containing hydrocarbons. Therefore, here, we investigate the effects of solar irradiation on an asphalt binder. Upon irradiation in a photooxidation microcosm, thin films of the asphalt binder produce abundant oil- and water-soluble oxygenated hydrocarbons, which we hypothesize are also leached from roads and highways through photooxidation reactions. Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) enables extensive compositional characterization of the virgin asphalt binder, irradiated asphalt binder, and the water-soluble photoproducts. The results reveal the production of water-soluble species that resemble the molecular composition of petroleum-derived dissolved organic matter, including abundant hydrocarbons and S-containing species with up to 18 oxygen atoms. The results also confirm photo-induced oxidation, fragmentation, and potentially polymerization as active processes involved in the production of water-soluble organic pollutants from asphalt.

How the 2010 Deepwater Horizon spill reshaped our understanding of crude oil photochemical weathering at sea: a past, present, and future perspective

The weathering of crude oil at sea has been researched for nearly half a century. However, there have been relatively few opportunities to validate laboratory-based predictions about the rates, relative importance, and controls of oil weathering processes (e.g., evaporation, photo-oxidation, and emulsification) under natural field conditions. The 2010 Deepwater Horizon (DWH) spill in the Gulf of Mexico provided the oil spill science community with a unique opportunity to evaluate our laboratory-based predictions in nature. With a focus on photochemical weathering, we review what we knew prior to the DWH spill, what we learned from the DWH spill, and what priority gaps in knowledge remain. Three key findings from the DWH spill are discussed. First, the rate and extent of photochemical weathering was much greater for the floating surface oil than expected based on early conceptual models of oil weathering. Second, indirect photochemical processes played a major role in the partial oxidation of the floating surface oil. Third, the extensive and rapid changes to the physical and chemical properties of oil by sunlight may influence oil fate, transport, and the selection of response tools. This review also highlights findings and predictions about photochemical weathering of oil from several decades ago that appear to have escaped the broader scientific narrative and ultimately proved true for the DWH spill. By focusing on these early predictions and synthesizing the numerous findings from the DWH spill, we expect this review will better prepare the oil spill science community to respond to the next big spill in the ocean.

Towards comprehensive analysis of oxygen containing organic compounds in groundwater at a crude oil spill site using GC×GC-TOFMS and Orbitrap ESI-MS

In this study, both GC × GC-TOFMS and Orbitrap ESI-MS were used to characterize the oxygen containing organic compounds, OCOCs, present in groundwater at a site where a crude oil pipeline ruptured decades ago. This is the only side-by-side comparison of results from these two methods analyzed by the same laboratory. GC × GC-TOFMS analysis shows OCOCs identified at the crude oil-release site are consistent with, and structurally similar to, those identified at previously studied fuel release sites. Molecular structures close to the release point differ from those found downgradient, becoming less complex and with different compound classes dominating. As with the GC × GC-TOFMS, the Orbitrap revealed that the composition of OCOCs present in groundwater close to the source area was distinctly different from that seen downgradient; however, the chemical structures increased significantly in size and complexity from wells near the source to the farthest downgradient well. Investigation into this finding suggests that the presence and structures of these non-GC-able OCOCs are consistent with organic matter resulting from biosynthesis or other processes found in natural water systems and are unlikely to be intermediates (metabolites) along petroleum biodegradation pathways.

Biodegradation, Photo-oxidation, and Dissolution of Petroleum Compounds in an Arctic Fjord during Summer

Increased economic activity in the Arctic may increase the risk of oil spills. Yet, little is known about the degradation of oil spills by solar radiation and the impact of nutrient limitation on oil biodegradation under Arctic conditions. We deployed adsorbents coated with thin oil films for up to 4 months in a fjord in SW Greenland to simulate and investigate in situ biodegradation and photo-oxidation of dispersed oil droplets. Oil compound depletion by dissolution, biodegradation, and photo-oxidation was untangled by gas chromatography-mass spectrometry-based oil fingerprinting. Biodegradation was limited by low nutrient concentrations, reaching 97% removal of nC_13-26-alkanes only after 112 days. Sequencing of bacterial DNA showed the slow development of a bacterial biofilm on the oil films predominated by the known oil degrading bacteria Oleispira, Alkanindiges and Cycloclasticus. These taxa could be related to biodegradation of shorter-chain (≤C₂₆) alkanes, longer-chain (≥C₁₆) and branched alkanes, and polycyclic aromatic compounds (PACs), respectively. The combination of biodegradation, dissolution, and photo-oxidation depleted most PACs at substantially faster rates than the biodegradation of alkanes. In Arctic fjords during summer, nutrient limitation may severely delay oil biodegradation, but in the photic zone, photolytic transformation of PACs may play an important role.