Activation of Lattice Oxygen in LaFe (Oxy)hydroxides for Efficient Phosphorus Removal

Intertwined role of mechanism identification by DFT-XAFS and engineering considerations in the evolution of P adsorbents

Adsorption method exhibits promising potential in effectively removal of phosphate from wastewater, yet it faces tremendous challenges in practical application. Limited comprehension of adsorption mechanisms and the lack of evaluation method for scaling up application are the two main obstacles. To fully realize the practical application of P adsorbents, we reviewed advanced tools, including density functional theory (DFT) and/or X-ray absorption fine structure (XAFS) to elucidate mechanisms, underscored the significance of thermodynamics and kinetics in engineering design, and proposed strategies for regenerating and reusing P adsorbents. Specifically, we delved into the utilization of DFT and XAFS to gain insights into adsorption mechanisms, focusing on active site verification and molecular interaction configurations. Additionally, we explored precise calculation methods for adsorption thermodynamics and adsorption kinetics, encompassing thermodynamic equilibrium constants, reactor selection, and the regeneration, recovery, and disposal of P adsorbents. Our comprehensive review aims to serve as a guiding light in advancing the development of highly efficient P adsorbents for engineering applications.

Lanthanum-Integrated Porous Adsorbent for Effective Phosphorus Removal

In pursuit of accessing clean water, the phosphate removal is of great importance for preventing eutrophication toward sustainable ecology. However, effective adsorbents with high capacity, selectivity, and long-term stability for treating phosphate in water still remain desired, which requires further development. Herein, a type of porous La-based adsorbents, which are composed of highly dispersed La(OH)3 on amino-functionalized Caragana korshinskii (CK) nanowires, are designed and fabricated through simple amination and decoration of lemon bars. Specifically, the adsorption to phosphate can be quickly completed within 50 min, and an ultrahigh adsorption capacity of 173.3 mg of P g-1 is realized. Moreover, these composite adsorbents display excellent selectivity and anti-interference ability to phosphate in the presence of common anions (CO3 2-, NO3-, Cl-, and SO4 2-). After four regenerations, there is still a removal rate of 85%. This study underscores an integrated material model for designing advanced structures toward efficient wastewater treatment.

Magnetic field-assisted adsorption of phosphate on biochar loading amorphous Zr-Ce (carbonate) oxide composite

For metal-based phosphate adsorbents, the dispersity and utilization of surface metal active sites are crucial factors in their adsorption performance and synthesis cost. In this study, a biochar material modified with amorphous Zr-Ce (carbonate) oxides (BZCCO-13) was synthesized for the phosphate uptake, and the adsorption process was enhanced by magnetic field. The beside-magnetic field was shown to have a better influence than under-magnetic field on adsorption, with maximum adsorption capacities (123.67 mg P/g) 1.14-fold greater than that without magnetic field. The beside-magnetic field could also accelerate the adsorption rate, and the time to reach 90% maximum adsorption capacity decreased by 83%. BZCCO-13 has a wide range of application pHs from 5.0 to 10.0, with great selectivity and reusability. The results of XPS and ELNES showed that the "magnetophoresis" of Ce3+ under the magnetic field was the main reason for the enhanced adsorption performance. In addition, increased surface roughness, pore size and oxygen vacancies, enhanced mass transfer by Lorentz force under a magnetic field, all beneficially influenced the adsorption process. The mechanism of phosphate adsorption by BZCCO-13 could be attributed to electrostatic attraction and CO32-dominated ligand exchange. This study not only provided an effective strategy for designing highly effective phosphate adsorbents, but also provides a new light on the application of rare earth metal-based adsorbent in magnetic field.

Monodispersed and Organic Amine Modified La(OH)3 Nanocrystals for Superior Advanced Phosphate Removal

Advanced phosphate removal is critical for alleviating the serious and widespread aquatic eutrophication, strongly depending on the development of superior adsorption materials to overcome low chemical affinity and sluggish mass transfer at low phosphate concentrations. Herein, the first synthesis of monodispersed and organic amine modified lanthanum hydroxide nanocrystals (OA-La(OH)3) for advanced phosphate removal by modulating inner Helmholtz plane (IHP), is reported. These OA-La(OH)3 nanocrystals with positively charged surfaces and abundant exposed La sites exhibit specific affinity toward phosphate, delivering a maximum adsorption capacity of 168 mg P g⁻1 and a wide pH adaptability from 3.0 to 11.0, as well as a robust anti-interference performance, far surpassing those of documented phosphate removal materials. The superior phosphate removal performance of OA-La(OH)3 is attributed to its protonated organic amine in IHP, which enhances the electrostatic attraction around the adsorbent-solution interface. Impressively, OA-La(OH)3 can treat ≈5 000 and ≈3 200 bed volumes of simulated and real phosphate-containing wastewater to below extremely strict standard (0.1 mg L⁻1) in a fixed-bed adsorption mode, exhibiting great potential for advanced phosphate removal. This study offers a facile modification strategy to improve phosphate removal performance of nanoscale adsorbents, and sheds light on the structure-reactivity relationship of La-based materials.

MgO-modified biochar by modifying hydroxyl and amino groups for selective phosphate removal: Insight into phosphate selectivity adsorption mechanism through experimental and theoretical

Metal oxides-modified biochars have been widely studied as promising adsorbents for removing phosphate from wastewater discharge. Yet, the low adsorption selectivity towards phosphate severely limits its potential in practical applications. In this study, MgO-modified biochar modified by hydroxyl and amino groups (OH/NH2@MBC) is developed for selective phosphorus recovery from wastewater. As major results, the OH/NH2@MBC exhibits favorable phosphate adsorption performance is superior to that of MBC resin in the presence of co-existing anions (NO3-, Cl-, HCO3- and SO42-) and natural organic matter (humic acid) even actual wastewater, suggesting its superior selectivity towards phosphate. The OH/NH2@MBC shows an excellent phosphate adsorption capacity (43.27 mg/g) and desorption ratio (82.34 %) after five cycles under the condition of anion coexistence (100 mg/L). The experimental and DFT theoretical study reveals that attaching hydroxyl and amino groups onto the MBC surface, which facilitates to inhibiting the side effects of anions (NO3-, Cl-, HCO3-, and SO42-) through Lewis acid-base sites, hydrogen bonds, and metal affinity, and preferentially select adsorption P, contributing greatly to improve phosphate adsorption selectivity. Importantly, the presence of amino and hydroxyl groups can reduce the Fermi level of OH/NH2@MgO(220) and OH/NH2@MgO(200) and improve the adsorption selection for HPO42-. This study provides an effective strategy for enhancing the adsorption selectivity of metal oxides-modified biochars towards phosphate through modifying functional groups.

Metal element-based adsorbents for phosphorus capture: Chaperone effect, performance and mechanism

Excessive phosphorus (P) enters the water bodies via wastewater discharges or agricultural runoff, triggering serious environmental problems such as eutrophication. In contrast, P as an irreplaceable key resource, presents notable supply-demand contradictions due to ineffective recovery mechanisms. Hence, constructing a system that simultaneously reduce P contaminants and effective recycling has profound theoretical and practical implications. Metal element-based adsorbents, including metal (hydro) oxides, layered double hydroxides (LDHs) and metal-organic frameworks (MOFs), exhibit a significant chaperone effect stemming from strong orbital hybridization between their intrinsic Lewis acid sites and P (Lewis base). This review aims to parse the structure-effect relationship between metal element-based adsorbents and P, and explores how to optimize the P removal properties. Special emphasis is given to the formation of the metal-P chemical bond, which not only depends on the type of metal in the adsorbent but also closely relates to its surface activity and pore structure. Then, we delve into the intrinsic mechanisms behind these adsorbents' remarkable adsorption capacity and precise targeting. Finally, we offer an insightful discussion of the prospects and challenges of metal element-based adsorbents in terms of precise material control, large-scale production, P-directed adsorption and effective utilization.

Cooperation of ferrous ions and hydrated ferric oxide for advanced phosphate removal over a wide pH range: Mechanism and kinetics

Excessive phosphate loading leads to eutrophication problems in rivers or lakes and causes serious environmental and economic damages, urging new technologies to reduce effluent phosphate at ultra-low levels. As a promising candidate, adsorption over metal oxides is restricted by the released hydroxide anions (OH-) through ligand exchange, which elevates pH and suppresses further adsorption. In this contribution, we found ferrous ions (Fe2+) significantly enhance phosphate removal over hydrated ferric oxide (HFO) in a wide pH range via a cooperation of adsorption and precipitation, and clarified the synergistic mechanism by a series of characterizations and the modified models of adsorption isotherms and pseudo second-order kinetics. The combination of Fe2+and HFO removed up to 51.7 mg/g of phosphate at pH 4.0, with 43.6 and 8.1 mg/g attributing to adsorption and precipitation, respectively. In comparison to HFO alone, HFO/Fe2+ system achieved 2.2-fold increase in phosphate removal, 1.9-fold increase in phosphate adsorption capacity, and 3.4-fold increase in phosphate removal rate. The enhancement is understood by that hydroxide anions released from ligand exchange over HFO are neutralized by protons produced from the oxidative precipitation of ferrous ions. The HFO/Fe2+ combining system is promising to realize advanced removal of low concentration phosphate containing wastewater, and these findings bring new insights for the development of novel phosphate removal technologies through a rational design of a combination process.

Green synthesis of CaxLa1-xMnO3 with modulation of mesoporous and vacancies for efficient low concentration phosphate adsorption

Phosphate concentrations in eutrophic surface waters are usually low, and efficient removal of low concentration phosphate remains a challenge. In this study, Ca-doped LaMnO3 synthesized at doping ratios, designated as CaxLa1-xMnO3 (x = 0, 0.2, 0.4, 0.7), were compared. It was found that, the adsorption capacity of Ca0.4La0.6MnO3 material reached 63.01 mg/g at pH = 5, increased by 63.6% over the undoped LaMnO3 perovskite. For long-term adsorption, Ca0.4La0.6MnO3 could constantly adsorb phosphate to avoid phosphate accumulation (<0.05 mg/L). This proves that Ca0.4La0.6MnO3 has the ability to control dynamic water eutrophication. Characterization and density functional theory results confirmed that CaxLa1-xMnO3 can increase the content of mesopores and oxygen vacancies, providing additional active sites. This reduces the adsorption energy of the La site, promotes electron transfer, and increases its affinity. It provides a new method for removing low-concentration phosphates.

Construction of 3D network aluminum sludge-based hydrogel beads: combination of macroization, amino functionalization, and resource utilization

An aluminum sludge-based composite material was constructed against the problems of phosphorus pollution and the waste of aluminum sludge resources. Utilizing metal Ce doping and hydrogel microbeads with pore preparation, the adsorption performance of the original sludge was improved. Meanwhile, the macroscopic body was constructed, and on this basis, polyethyleneimine (PEI) was introduced to complete the amino functionalization further to enhance the adsorption of phosphorus by the adsorbent, and NH-CeAIS-10 microbeads were successfully prepared. In adsorption, microbeads with larger specific surface area and richer functional groups are better choice compared to original sludge. The results of SEM, BET, FT-IR, and XPS analyses indicate that the adsorption of phosphorus by the microbeads is mainly achieved through electrostatic interactions, ligand exchange, and the formation of inner-sphere complexes. According to the Langmuir model, the maximum phosphorus adsorption capacity of NH-CeAIS-10 was 29.56 mg g-1, which was four times higher compared to native aluminum sludge. This also confirms the significant enhancement of phosphorus adsorption through the modification of aluminum sludge. Besides, in dynamic adsorption column experiments, the material exhibited up to 99% removal in simulated wastewater for up to 30 days, demonstrating the great adsorption potential of NH-CeAIS-10 in engineering applications.

Bimetallic capture sites on porous La/Bi hydroxyl double salts for efficient phosphate adsorption: Multiple active centers and excellent selective properties

The rapid development of modern agriculture aggravated water eutrophication. Therein, efficient and selective removal of phosphorus in water is the key to alleviating eutrophication. It is well known that lanthanum (La)-based material is a kind of outstanding phosphorus-locking agent. Therefore, improving the property of La-based adsorbents is a hot topic in this field. Herein, novel porous hydroxyl double salts (La/Bi-HDS) with bimetallic capture sites were prepared. The experimental result shows that La/Bi-HDS could maintain the high removal rate in the solution with a higher concentration of competing ions and the maximum P adsorption quantity of La/Bi-HDS attains 168.12 mg/g. Mechanistic studies supported by density functional theory (DFT) calculation demonstrate that introducing Bi3+ optimizes the electronic structure of La, reducing adsorption energy. In addition, the surface analysis shows that the introduction of Bi, which increases the pore size and volume of the material, improves the utilization efficiency of the active site. In a word, the introduction of Bi element as a strategy of killing two birds with one stone successfully improved the performance of La-based adsorbent. It provided a new direction for developing an efficient phosphorus-locking agent.

Adsorption-electrochemical mediated precipitation for phosphorus recovery from sludge filter wastewater with a lanthanum-modified cellulose sponge filter

In this study, the sludge filter wastewater is confirmed to investigate the effects of adsorption-electrochemical mediated precipitation (EMP) driven phosphorus recovery on the basis of lanthanum-modified cellulose sponge filter (LCLM) material. The adsorption-EMP method relies on in situ recovery phosphate (P) from the used desorption agent (NaOH-NaCl binary solution) via the formation of Ca5(PO4)3OH all while preserving the alkalinity of the desorption agents which benefited long-term application. The lanthanum content of LCLM was 9.0 mg/g, and the adsorption capacity reached 226.1 ± 15.2 mg P/g La at an equilibrium concentration of 3.9 mg P/L. After adsorption, 55.7 % of P was recovered, and the corresponding alkalinity increased from 1.9 mmol/L to 2.2 mmol/L. Adsorption mechanism analysis revealed that the high lanthanum usage of LCLM was attributed to the synergistic effect of the lattice oxygen of LaO and LaPO4·0.5H2O crystallite formation. Additionally, the Ca5(PO4)3OH was found precipitated in the precipitation in the cathode chamber (P-CC) rather than on the surface/section of cation exchange membrane (CEM) and cathode indicating that the P recovery process was controlled by the saturation of CaP species in the EMP system and the electromigration effect. These findings present a new strategy to promote the effective utilization of rare earth elements for P adsorption and demonstrate the potential application of adsorption-EMP systems in dephosphorization for wastewater treatment.

La-Ca/Fe-LDH-coupled electrochemical enhancement of organophosphorus removal in water: Organophosphorus oxidation improves removal efficiency

Metal ions or metal (hydrogen) oxides are widely used as active sites in the construction of phosphate-adsorbing materials in water, but the removal of soluble organophosphorus from water remains technically difficult. Herein, synchronous organophosphorus oxidation and adsorption removal were achieved using electrochemically coupled metal-hydroxide nanomaterials. La-Ca/Fe-layered double hydroxide (LDH) composites prepared using the impregnation method removed both phytic acid (inositol hexaphosphate, IHP) and hydroxy ethylidene diphosphonic acid (HEDP) acid under an applied electric field. The solution properties and electrical parameters were optimized under the following conditions: organophosphorus solution pH = 7.0, organophosphorus concentration = 100 mg L-1, material dosage = 0.1 g, voltage = 15 V, and plate spacing = 0.3 cm. The electrochemically coupled LDH accelerates the removal of organophosphorus. The IHP and HEDP removal rates were 74.9% and 47%, respectively in only 20 min, 50% and 30% higher, respectively, than that of La-Ca/Fe-LDH alone. The removal rate in actual wastewater reached 98% in only 5 min. Meanwhile, the good magnetic properties of electrochemically coupled LDH allow easy separation. The LDH adsorbent was characterized using scanning electron microscopy with energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction analysis. It exhibits a stable structure under electric field conditions, and its adsorption mechanism mainly includes ion exchange, electrostatic attraction, and ligand exchange. This new approach for enhancing the adsorption capacity of LDH has broad application prospects in organophosphorus removal from water.

Thermal Air Oxidation-Mediated Synchronous Coordination and Carbonation of Lanthanum on Biochar toward Phosphorus Adsorption from Wastewater

Biochar has attracted increasing attention as the sustainable and structure-tunable carrier for lanthanum (La) species for diverse applications. Carbonated La species possesses a higher biocompatibility and a lower leaching potential than other commonly used La species, while less attention is paid on the application of carbonated La in phosphorus (P) adsorption. Herein, thermal air oxidation (TAO) was applied as a novel strategy for synchronously tuning the coordination environment and chemical species of La on biochar surface. The results demonstrated that TAO induced the coordination of La with oxidation-generated oxygenated functional groups (OFGs) and carbonation of La species by the oxidation-generated CO2 on the biochar surface. The batch adsorption results showed that the Qm of resultant biochar remarkably increased from 68.92 to 132.49 mg/g at 1 g/L dosage. It also showed a robust adsorption stability in pH 2-6, a strong resistance to the co-existing Cl-, SO42-, NO3-, CO32-, or HCO3-, a stable adsorption recyclability, and an ultralow La leaching potential. The P adsorption was dominated by ligand exchange-induced inner-sphere complexation. In practical swine wastewater, the resultant biochar composite (1 g/L) removed 99.87% of P from 92.3 to 0.12 mg/L at a practical pH of 7.12. The density functional theory calculation further revealed the significant role of the binding of carbonated La by the biochar surface OFGs in reducing the P adsorption energies, indicating the synergism between the oxygenated biochar carrier and the carbonated La in P adsorption. Finally, this study provided a novel route to synchronously tune the coordination environment and chemical species of La on biochar via a facile TAO process for high-efficient P adsorption from wastewater.

A dual-cycle regeneration to recover high-value and high-purity FePO4 from real wastewater for Li-battery application

The recovery of high-purity and high-value FePO4 raw materials from wastewater has great prospects in LiFePO4 battery industry due to the huge demand for new energy vehicle. However, the conventional in-situ FePO4 precipitation, as well as ex-situ PO43- adsorption-alkali regeneration, was incapable of efficiently obtaining high-purity products. To solve these problems, a dual-cycle regeneration method of Fe-NH2-polyacrylonitrile (PAN) adsorbent and H2SO4 desorbing solution was proposed to ex-situ FePO4 recovery from wastewater for Li-battery application. Benefitted from coordination interaction and electrostatic attraction, the maximum PO43- adsorption capacity of Fe-NH2-PAN reached 73.1 ± 0.4 mg/g. The average PO43- removal rate of continuous flow devices were 88.5% and 91.3% when treating low-P-concentration (0.22 mg/L) municipal wastewater (MW) and high-P-concentration (48.9 mg/L) slaughterhouse wastewater (SW) respectively. Furthermore, high-purity FePO4 analyzed by XRD spectra was achieved from the desorption solution at pH ∼1.6, resulting in the ultrahigh P recovery efficiencies of 91.4 ± 3.2%-96.3 ± 2.5% for SW and 82.7 ± 3.5% for MW. Besides, the LiFePO4/C electrodes made of recycled FePO4 exhibited a better discharge capacity (37.3 - 55.8 mAh/g) than that of commercial FePO4 agent (32.2 - 35.1 mAh/g) from 80 to 132 cycles, which showed the promising feasibility of recovering FePO4 from wastewater for Li-battery application.

Highly stable and efficient Cr(VI) immobilization from water by adsorption with the La-substituted ferrihydrite as a naturally-occurring geosorbent in soils

Ferrihydrite (Fh) is a vital geosorbent in the natural environment. Here, Fh materials with lanthanum (La) substituted in varied La/La + Fe ratios were synthesized, and these La-Fh materials were investigated in-depth via adsorption kinetic and isothermal experiments to explore their adsorption performance for chromate [Cr(VI)] in soils. Material properties of La-Fh were further characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectrometer (FTIR), and X-ray photoelectron spectroscopy (XPS). The results clearly indicate that La³⁺ can be integrated into the Fh lattice, but the increase in La amount substituted into Fh is slowed down when the La/La + Fe ratio reaches to a larger value. Those La³⁺ cations that fail to become integrated may either get adsorbed or form a phase of La(OH)₃ on La-Fh surfaces. We also find that La substitution reduces the specific surface area (SSA) of La-Fh samples but raises their pH_pzc, which hampers La-Fh conversion to hematite and thus increases the chemical stability. These changes are related to the La-Fh structure and surface aspects, but they do not negatively affect the Cr(VI) adsorption efficacy, which can be promoted over a wide pH range to an alkaline pH. For instance, the maximum adsorption amount of Cr(VI) by 20%La-Fh is 30.2 mg/g at a near-neutral pH. However, the entire chromate adsorption processes are affected by H₂PO₄^- and humic acid due to their strong affinities for Cr(VI), but almost not influenced by NO₃^- and Cl^-. All the Cr(VI)-Fh reactions are well described by the fitted adsorption Freundlich model and conform to the pseudo-second-order reaction kinetic equation. The mechanisms which enhance La-Fh's adsorption ability for Cr(VI) are governed by chemical interactions, because La substitution can increase the hydroxyl density on Fh surfaces and thus improve the reactivity of La-Fh towards Cr(VI), leading to an evidently enhanced Cr(VI) immobilization onto La-Fh.

B-site metal modulation of phosphate adsorption properties and mechanism of LaBO3 (B = Fe, Al and Mn) perovskites

La-based adsorbents are widely used for controlling phosphate concentration in water bodies. In order to explore the effect of different B-site metals regulating La-based perovskites on phosphate adsorption, three La-based perovskites (LaBO₃, B = Fe, Al, and Mn) were prepared using the citric acid sol-gel method. Adsorption experiments showed that LaFeO₃ exhibited the highest adsorption capacity for phosphate, which was 2.7 and 5 times higher than those of LaAlO₃ and LaMnO₃, respectively. The characterization results demonstrated that LaFeO₃ has dispersed particles exhibiting larger pore size and more pores than LaAlO₃ and LaMnO₃. Spectroscopy analysis and density functional theory calculation results showed that different B-positions cause a change in the type of perovskite crystals. Among them, the differences between lattice oxygen consumption ratio, zeta potential and adsorption energy are the main reasons for the differences in adsorption capacity. In addition, the adsorption of phosphate by La-based perovskites were well fitted with Langmuir isotherm and pursues the pseudo-second-order kinetic models. The maximum adsorption capacities were 33.51, 12.31 and 6.61 mg/g for LaFeO₃, LaAlO₃ and LaMnO₃, respectively. The adsorption mechanism was mainly based on inner-sphere complexation and electrostatic attraction. This study provides an explanation for the influence of different B sites on phosphate adsorption by perovskite.

Photo-Fenton self-cleaning carbon fibers membrane supported with Zr-MOF@Fe2O3 for effective phosphate removal from algae-rich water

Adsorbents featuring abundant binding sites and high affinity to phosphate have been used to resolve water eutrophication. However, most of the developed adsorbents were focused on improving the adsorption ability of phosphate but ignored the effect of biofouling on the adsorption process especially used in the eutrophic water body. Herein, a novel MOF-supported carbon fibers (CFs) membrane with high regeneration and antifouling capability, was prepared by in-situ synthesis of well-dispersed MOF on CFs membrane, to remove phosphate from algae-rich water. The hybrid UiO-66-(OH)₂@Fe₂O₃@CFs membrane exhibits a maximum adsorption capacity of 333.3 mg g^-1 (pH 7.0) and excellent selectivity for phosphate sorption over coexisting ions. Moreover, the Fe₂O₃ nanoparticles anchored on the surface of UiO-66-(OH)₂ through 'phenol-Fe(III)' reaction can endow the membrane with the robust photo-Fenton catalytic activity, which improves long-term reusability even under algae-rich condition. After 4 times photo-Fenton regenerations, the regeneration efficiency of the membrane could remain 92.2%, higher than that of hydraulic cleaning (52.6%). Moreover, the growth of C. pyrenoidosa was significantly reduced by 45.8% within 20 days via metabolism inhibition due to membrane-induced P-deficient conditions. Hence, the developed UiO-66-(OH)₂@Fe₂O₃@CFs membrane holds significant prospects for large-scale application in phosphate sequestration of eutrophic water bodies.

Direct Atomic-Scale Insight into the Precipitation Formation at the Lanthanum Hydroxide Nanoparticle/Solution Interface

Understanding precipitation formation at lanthanum hydroxide (La(OH)₃) nanoparticle-solution interfaces plays a crucial role in catalysis, adsorption, and electrochemical energy storage applications. Liquid-phase transmission electron microscopy enables powerful visualization with high resolution. However, direct atomic-scale imaging of the interfacial metal (hydro)oxide nanostructure in solutions has been a major challenge due to their beam-driven dissolution. Combining focused ion beam and aberration-corrected high-angle annular dark-field scanning transmission electron microscopy, we present an atomic-scale study of precipitation formation at La(OH)₃ nanoparticle interfaces after reaction with phosphate. The structure transformation is observed to occur at high- and low-crystalline La(OH)₃ nanoparticle surfaces. Low-crystalline La(OH)₃ mostly transformed and high-crystalline ones partly converted to LaPO₄ precipitations on the outer surface. The long-term structure evolution shows the low transformation of high-crystalline La(OH)₃ nanoparticles to LaPO₄ precipitation. Because precipitation at solid-solution interfaces is common in nature and industry, these results could provide valuable references for their atomic-scale observation.

Mechanistic insights into the selective adsorption of phosphorus from wastewater by MgO(100)-functionalized cellulose sponge

Metal oxides have remained state-of-the-art adsorbents for recovering phosphorus from aqueous solutions, but their practical application is still limited by their unsatisfactory adsorption capacities and selectivities in wastewater. Here, using MgO as a model metal oxide, the strategy of employing porous cellulose sponge to support metal oxides featuring exposed specific crystal facets was proposed to develop promising phosphate adsorbents. The phosphate adsorption isotherms and kinetics were measured and the phosphate adsorption mechanism was explored. The results show that cellulose sponge-supported MgO(100) (C-MgO(100)) has a saturation capacity of 28.3 mg P/g, over ten times higher than MgO(100) particles. Importantly, the phosphate adsorption properties of C-MgO(100) are almost not affected in wastewater, demonstrating its exceptional selectivity for phosphate adsorption. In contrast, the saturation capacity of MgO(111)-functionalized cellulose sponge is obviously declined in wastewater. Experimental together with theoretical analyses indicate that phosphate is chemically adsorbed on C-MgO(100) with obvious electrons transfer from the p-orbital of phosphate, and the adsorption energy of C-MgO(100) towards phosphate is maintained in the presence of coexisting anions. Ultimately, regeneration experiments reveal that a regenerant formulation composed of KOH (wt.1 %) and tap water is suitable for the regeneration of C-MgO(100) with >82.6 % phosphate desorption efficiencies after 5 cycles, further confirming its potential in practical application for the treatment of real water.

Pyrolysis temperature affects the physiochemical characteristics of lanthanum-modified biochar derived from orange peels: Insights into the mechanisms of tetracycline adsorption by spectroscopic analysis and theoretical calculations

Biochar (BC) derived from orange peels was modified using LaCl₃ to enhance its tetracycline (TC) adsorption capacity. SEM-EDS, FT-IR, XRD, and BET were used to characterize the physiochemical characteristics of La-modified biochar (La-BC). Batch experiments were conducted to investigate the effects of several variables like pyrolysis temperature, adsorbent dosage, initial pH, and coexisting ions on the adsorption of TC by La-BC. XPS and density functional theory (DFT) were used to elucidate the TC adsorption mechanism of La-BC. The results demonstrated that La was uniformly coated on the surface of the La-BC. The physiochemical characteristics of La-BC highly depended on pyrolysis temperature. Higher temperature increased the specific surface area and functional groups of La-BC, thus enhancing its TC adsorption capacity. La-BC prepared at 700 °C (BC@La-700) achieved the maximum adsorption capacity of 143.20 mg/g, which was 6.8 and 4.6 times higher than that of BC@La-500 and BC@La-600, respectively. The mechanisms of TC adsorption by La-BC were most accurately described by the pseudo-second-order kinetic model. Furthermore, the adsorption isotherm of La-BC was consistent with the Freundlich model. BC@La-700 achieved good TC adsorption efficiencies even at a wide pH range (pH 4-10). Humic acid significantly inhibited TC adsorption by La-BC. The presence of coexisting ions (NH₄⁺, Ca²⁺, NO₃^-) did not significantly affect the adsorption capacity of La-BC, particularly BC@La-700. Moreover, BC@La-700 also exhibited the best recycling performance, which achieved relative high adsorption capacity even after 5 cycles. The XPS results showed that π-π bonds, oxygen-containing functional groups, and La played a major role in the adsorption of TC on La-BC. The result of DFT showed that the adsorption energy of La-BC was the greatest than that of other functional groups on biochar. Collectively, our findings provide a theoretical basis for the development of La-BC based materials to remove TC from wastewater.

Improvement of the Stability of IO3--, SeO32--, and SeO42--Coprecipitated Barite after Treatment with Phosphate

Coprecipitation of radionuclides with barite has been studied to remove radionuclides from radioactive liquid waste because of its excellent removal efficiency; however, little information exists concerning the stability of the ions coprecipitated with barite. This study systematically investigated the stability of iodate, selenite, and selenate coprecipitated with barite via leaching tests. These oxyanions were gradually leached from the oxyanion-bearing barite into ultrapure water over time. Leaching of the oxyanions significantly increased in leaching solutions containing NaCl (pH 5.3), NaNO₃ (pH 5.9), and Na₂SO₄ (pH 5.7). Conversely, leaching of the oxyanions was suppressed in KH₂PO₄ solution (pH 8.5), indicating that phosphate stabilized the oxyanion-bearing barite. The effect of phosphate treatment on oxyanion-bearing barite was further investigated. The results showed that the barite surface was modified with phosphate, and a thin surface layer of a barium phosphate-like structure was formed. The amount of oxyanions leached from the phosphate-treated samples into leaching solutions containing NaCl or NaNO₃ was much lower than the amounts leached from the untreated barite samples into ultrapure water. The barite coprecipitation combined with subsequent phosphate treatment may be a promising method to efficiently remove iodate, selenite, and selenate from wastewater and stabilize them as barite coprecipitates.

Constructing 3D flower-like LaFe bimetal oxides with abundant mesoporous and controllable active sites for high-efficient phosphorus removal: Synthesis, mechanism, and application

The design of high-performance porous adsorbents for phosphorus removal is a persistently hot topic to maintain a sustainable aquatic ecosystem. In the present study, a self-templating strategy using LaFe cyanometallates (CMs) as precursors was adopted to prepare porous LaFe bimetal oxides with optimizable structure and composition for phosphate adsorption. The results showed that a high supplied La^III/Fe^II ratio enabled an adequate coordination polymerization in the preparation of LaFe CM precursor and led to a striking three-dimensional (3D) structure of "twin lotus flower" with high coordinated water content, which resulted in a 3D flower-like LaFe oxide with high surface area and high porosity (mainly in mesopore). The LaFe oxide of LaFe15T possessing the optimal La/Fe ratio (1.5: 1) exhibited the most superior performance of phosphate adsorption, where La was confirmed to be the main active site for phosphate capture via ligand exchange mechanism. The batch and column tests of phosphate adsorption showed that the 3D flower-like LaFe oxides are effective adsorbents for phosphate removal. Therefore, the structure optimization in the template preparation stage is an effective strategy to design porous LaFe bimetal oxides as high-performance phosphorus removal materials.

Study on the management efficiency of lanthanum/iron co-modified attapulgite on sediment phosphorus load

Attapulgite co-modified by lanthanum-iron (MT-LHMT) was used to study its effectiveness and mechanism in controlling phosphorus release from sediments. MT-LHMT has high adsorption capacity for phosphate and the maximum adsorption capacity of MT-LHMT to phosphate can reach 75.79 mg/g. The mechanism mainly involved electrostatic action, surface precipitation and ligand exchange between MT-LHMT bonded hydroxyl and phosphate to form La-O-P and Fe-O-P inner-sphere complexes. MT-LHMT has excellent adsorption performance in the pH range of 3-8. In addition to HCO₃^-, CO₃^2- and HA^- had a negative effect on the phosphorus removal of MT-LHMT, while NO₃^-, Cl^-, SO₄^2-, K⁺, Ca²⁺ and Mg²⁺ had a positive or no effect on phosphorus removal. MT-LHMT significantly reduced the risk of phosphorus release from overlying water in different dose effects and covering methods, as well as the unstable inactivation of flowing phosphorus, sediment dissolved reactive phosphorus (DRP) and available phosphorus with medium diffusion gradient in thin film in the sediment-water interface (Labile-P_DGT). The MT-LHMT capping wrapped with fabric can reduce the risk of nitrogen release from sediment to overlying water more than only MT-LHMT capping. The results of this study showed that the MT-LHMT capping wrapped with fabric has high potential and can be used as an active capping material to manage the nitrogen and phosphorus load in surface water.

Efficient phosphate elimination from aqueous media by La/Fe bimetallic modified bentonite: Adsorption behavior and inner mechanism

Nowadays, eutrophication problem in surface waterbodies has attracted specific attention. Herein, we reported facile synthesis and application of La/Fe engineered bentonite (LFB) for efficient phosphate elimination. Results indicated that bimetallic modified LFB composite could achieve efficient phosphate removal at pH 2-6, and satisfactory selectivity was implied by stable phosphate capturing within the interference of competing species (Cl^-, NO₃^-, HCO₃^-, SO₄^2-, F^- and HA). Pseudo-second-order model could satisfactorily depict the kinetic behavior at different initial concentrations, indicating chemisorption of phosphate on LFB surface. Isotherm study suggested that phosphate adsorption behavior could be fitted well with Sips isotherm equation, indicating that both homogeneous monolayer adsorption and heterogeneous multilayer coverage of phosphate on LFB surface occurred within the investigated conditions. Adsorption thermodynamics implied the spontaneous and endothermic feature of phosphate loading on LFB composite. Characterization analysis confirmed successful La and Fe loading on bentonite, and electrostatic attraction and ligand exchange were the main adsorption mechanism. The high adsorption capacity, cost-effective feature and strong affinity towards phosphate demonstrated certain potential of as-prepared LFB composite for phosphate separation from eutrophic water.

Phosphorus harvesting from fresh human urine: A strategy of precisely recovering high-purity calcium phosphate and insights into the precipitation conversion mechanism

Phosphorus (P) harvesting from source-separated urine to optimize the overall nutrient loop is one of the most appealing benefits and is a global research interest in wastewater management and treatment. However, current P precipitation is mainly oriented to struvite, which is limited by the issues such as relatively low product purity and high cost of Mg source. Distinguished from previous conventional struvite precipitation, the strategy of precisely harvesting P from fresh human urine as high-purity calcium phosphate was first proposed in this study. This enhanced strategy can optimize P harvesting performance and product purity by simply regulating the consumption of calcium-based materials via model simulation and experimental validation. The thermodynamic model was constructed to probe the precipitation conversion mechanism, and visually predict the component and yield for products under various operating conditions. Batch experiments were conducted to investigate P recovery performance as a function of initial Mg²⁺ concentration, initial pH level, as well as degree of urine hydrolysis. Moreover, the alternative dosing scheme with different calcium salts and alkali was presented, diversifying the options for efficient P recovery. The results showed that, from the perspective of acidic storage for fresh urine, P recovery can be boosted along with eliminating urine hydrolysis. In urine with an initial pH=2.0, P can be completely recovered and purity for calcium phosphate can be optimized to 100% within a Ca/P ratio range of 1.67-2.3. Overall, this work is of great significance for precisely and efficiently harvesting P from urine and provides an integrated strategy for P resource recovery from urine.

Arsenic removal performance and mechanism from water on iron hydroxide nanopetalines

Human health has been seriously endangered by arsenic pollution in drinking water. In this paper, iron hydroxide nanopetalines were synthesized through a precipitation method using KBH₄ and their performance and mechanism of As(V) and As(III) removal were investigated. The prepared material was characterized by SEM-EDX, XRD, BET, zeta potential and FTIR analyses. Batch experiments indicated that the iron hydroxide nanopetalines exhibited more excellent performance for As(V) and As(III) removal than ferrihydrite. The adsorption processes were very fast in the first stage, followed a relatively slower adsorption rate and reached equilibria after 24 h, and the reaction could be fitted best by the pseudo-second order model, followed by the Elovich model. The adsorption isotherm data followed to the Freundlich model, and the maximal adsorption capacities of As(V) and As(III) calculated by the Langmuir model were 217.76 and 91.74 mg/g at pH 4.0, respectively, whereas these values were 187.84 and 147.06 mg/g at pH 8.0, respectively. Thermodynamic studies indicated that the adsorption process was endothermic and spontaneous. The removal efficiencies of As(V) and As(III) were significantly affected by the solution pH and presence of PO₄^3- and citrate. The reusability experiments showed that more than 67% of the removal efficiency of As(V) could be easily recovered after four cycles. The SEM and XRD analyses indicated that the surface morphology and crystal structure before and after arsenic removal were stable. Based on the analyses of FTIR, XRD and XPS, the predominant adsorption mechanism was the formation of inner-sphere surface complexes by the surface hydroxyl exchange reactions of Fe-OH groups with arsenic species. This research provides a new strategy for the development of arsenic immobilization materials and the results confirm that iron hydroxide nanopetalines could be considered as a promising material for removing arsenic from As-contaminated water for their highly efficient performance and stability.

Highly efficient P uptake by Fe3O4 loaded amorphous Zr-La (carbonate) oxides: Electrostatic attraction, inner-sphere complexation and oxygen vacancies acceleration effect

Bimetallic oxides composites have received an increasing attention as promising adsorbents for aqueous phosphate (P) removal in recent years. In this study, a novel magnetic composite MZLCO was prepared by hybridizing amorphous Zr-La (carbonate) oxides (ZLCO) with nano-Fe₃O₄ through a one-pot solvothermal method for efficient phosphate adsorption. Our optimum sample of MZLCO-45 exhibited a high Langmuir maximum adsorption capacity of 96.16 mg P/g and performed well even at low phosphate concentration. The phosphate adsorption kinetics by MZLCO-45 fitted well with the pseudo-second-order model, and the adsorption capacity could reach 79% of the ultimate value within the first 60 min. The phosphate adsorption process was highly pH-dependent, and MZLCO-45 performed well over a wide pH range of 2.0-8.0. Moreover, MZLCO-45 showed a strong selectivity to phosphate in the presence of competing ions (Cl^-, NO₃^-, SO₄^2-, HCO₃^-, Ca²⁺, and Mg²⁺) and a good reusability using the eluent of NaOH/NaCl mixture, then 64% adsorption capacity remained after ten recycles. The initial 2.0 mg P/L in municipal wastewater and surface water could be efficiently reduced to below 0.1mg P/L by 0.07 g/L MZLCO-45, and the phosphate removal efficiencies were 95.7% and 96.21%, respectively. Phosphate adsorption mechanisms by MZLCO-45 could be attributed to electrostatic attraction and the inner-sphere complexation via ligand exchange forming Zr/La-O-P, -OH and CO₃^2- groups on MZLCO-45 surface played important roles in the ligand exchange process. The existence of oxygen vacancies could accelerate the phosphate absorption rate of the MZLCO-45 composites.

Converting Chrysotile Nanotubes into Magnesium Oxide and Hydroxide Using Lanthanum Oxycarbonate Hybridization and Alkaline Treatment for Efficient Phosphate Adsorption

Magnesium oxide and hydroxide nanomaterials comprise a class of promising advanced functional metal nanomaterials whose use in environmental and material applications is increasing. Several strategies to synthesize these nanomaterials have been described but are unsustainable and uneconomic. This work reports on a processing strategy that turns natural magnesium-rich chrysotile into magnesium oxide and hydroxide nanoparticles via nanoparticle hybridization and an alkaline process while enabling La-based nanoparticles to coat the chrysotile nanotube surfaces. The adsorbent's resulting hybrid nanostructure had an outstanding capacity for phosphate uptake (135.2 mg P g^-1) and enhanced regeneration performance. Furthermore, the adsorbent featured wide applicability with respect to the coexistence of competitive anions and a broad range of pH conditions, and its high-performance phosphate removal from sewage effluent was also demonstrated. Spectroscopic and microscopic analyses revealed the scavenging ability of phosphate by the La-based and Mg-based nanoparticles and the multiple capture mechanisms involved, including surface complexation and ion exchange. This proposed approach expands chrysotile's potential use as a magnesium-rich nanomaterial and harbors great promise for the removal of pollutants in a variety of real-world settings.

Electrified nanohybrid filter for enhanced phosphorus removal from water

Phosphorus (P) has been identified as a major cause of eutrophication. One feasible way to deal with P-containing wastewater is to employ advanced adsorbents with high P affinity. Towards this end, the loading of these sorbents onto a conductive scaffold would facilitate the introduction of an electric field into the reaction system thereby permitting a continuous-flow operation and improved P sorption kinetics. Here, the preparation and evaluation of an electroactive carbon nanotube (CNT) filter functionalized with cerium-based metal organic frameworks (Ce-MOF) is reported. Various advanced characterization techniques confirmed the successful fabrication of the Ce-MOF/CNT nanohybrid filter. The results suggested that the nanohybrid filter had a maximum P adsorption capacity of 22.41 mg g^-1, which compared favorably with other state-of-the-art P sorbents. Ce-MOF loading, applied voltage and flow rate each increased the rate constants for phosphate removal by factors of 1.6, 2.1 and 5.8 times relative to the absent states. The underlying P sorption mechanisms involved outer-sphere surface complexation (electrostatic attraction), inner-sphere surface complexation (Ce-O-P) and diffusion. The performance was tolerant of a wide operational pH range and different water matrices. The Ce-MOF/CNT electrochemical filter described in this study provides a viable strategy to address the challenging issues associated with aqueous P pollution.

Arsenic Oxidation and Removal from Water via Core-Shell MnO2@La(OH)3 Nanocomposite Adsorption

Arsenic (As(III)), more toxic and with less affinity than arsenate (As(V)), is hard to remove from the aqueous phase due to the lack of efficient adsorbents. In this study, a core-shell structured MnO₂@La(OH)₃ nanocomposite was synthesized via a facile two-step precipitation method. Its removal performance and mechanisms for As(V) and As(III) were investigated through batch adsorption experiments and a series of analysis methods including the transformation kinetics of arsenic species in As(III) removal, FTIR, XRD and XPS. Solution pH could significantly influence the removal efficiencies of arsenic. The adsorption process of As(V) occurred rapidly in the first 5 h and then gradually decreased, whereas the As(III) removal rate was relatively slower. The maximum adsorption capacities of As(V) and As(III) were up to 138.9 and 139.9 mg/g at pH 4.0, respectively. For As(V) removal, the inner-sphere complexes of lanthanum arsenate were formed through the ligand exchange reactions and coprecipitation. The oxidation of As(III) to the less toxic As(V) by δ-MnO₂ and subsequently the synergistic adsorption process by the lanthanum hydroxide on the MnO₂@La(OH)₃ nanocomposite to form lanthanum arsenate were the dominant mechanisms of As(III) removal. XPS analysis indicated that approximately 20.6% of Mn in the nanocomposite after As(III) removal were Mn(II). Furthermore, a small amount of Mn(II) and La(III) were released into solution during the process of As(III) removal. These results confirm its efficient performance in the arsenic-containing water treatment, such as As(III)-contaminated groundwater used for irrigation and As(V)-contaminated industrial wastewater.

High-efficiency capture and removal of phosphate from wastewater by 3D hierarchical functional biomass-derived carbon aerogel

The development of functional biomass-based carbon aerogels (CAs) with excellent mechanical flexibility and ultra-high phosphate capture capacity is crucial for capture and recovery of phosphate from waste water. Herein, a functional biomass-derived CA (MgO@SL/CMC CA) with an ordered wave-shaped layered structure and excellent compressibility was fabricated with the aim of creating a material with efficient phosphate capture performance. The incorporation of sulfonomethylated lignin (SL) significantly improves the mechanical flexibility of MgO@SL/CMC CA. Numerous MgO nano-particles (NPs), which act as principal adsorption sites, were uniformly anchored on the MgO@SL/CMC CA. The prepared MgO@SL/CMC CA with high Mg content (20.34 wt%) exhibited an ultra-high phosphate capture capacity (218.51 mg P g^-1 for adsorbent or 644.58 mg P g^-1 for MgO), excellent adsorptive selectivity for phosphate and a wide pH range of application (2-8). Notably, more than 81.95% of the phosphate capture capacity was retained after six cyclic adsorption-desorption tests. A considerable effective treatment volume (468 BV) of actual wastewater (1.7 mg P L^-1) could be achieved by the MgO@SL/CMC CA in the fixed-bed adsorption column. Research into the adsorption mechanism reveals that monolayer chemisorption of phosphate occurs on the MgO@SL/CMC CA through a ligand exchange process. The combination of favorable flexibility, green raw materials and superior phosphate capture performance endows MgO@SL/CMC CA with great application potential in the practical treatment of wastewater.

Deep insight into the Sb(III) and Sb(V) removal mechanism by Fe-Cu-chitosan material

Currently, alleviating antimony (Sb) contamination in aqueous solutions is crucial for restoring and recovering ecological and environmental health. Due to its toxicity, bioaccumulation and mobile characteristics, developing an efficient technique for antimony decontamination is imperative. Herein, we prepared a Fe-Cu-chitosan (FCC) composite by a one-step coprecipitation method, in which nanoscale Fe/Cu acts as the active sites and the whole structure is exhibited as porous microscale particles. A Fe/Cu proportion of 2/1 (FCC-2/1) was determined to be the optimum proportion for antimony adsorption, specifically 34.5 mg g^-1 for Sb(III) and 26.8 mg g^-1 for Sb(V) (initial concentration: 5.0 mg L^-1). Spectral characterization, batch experiments and density functional theory (DFT) simulations were applied to determine the adsorption mechanism, in which surface hydroxyls (-OH) were responsible for antimony complexion and Fe-Cu coupling was a major contributor to adsorption enhancement. According to kinetic analysis, Cu provided an electrostatic attraction during the adsorption process, which facilitated the transportation of antimony molecules to the material interface. In the meantime, the FCC electronic structure was modified due to the optimization of the Fe-Cu interface coupling. Based on the Mullikan net charge, the intrinsic Fe-O-Cu bond might favor interfacial electronic redistribution. When the antimony molecule contacted the adsorption interface, the electrons transferred swiftly as Fe/Cu 3d and O 2p orbital hybridization occurred, thus inducing a stabilizing effect. This work may offer a new perspective for binary oxide construction and its adsorption mechanism analysis.

Mechanisms of orthophosphate removal from water by lanthanum carbonate and other lanthanum-containing materials

Removing phosphorus (P) from water and wastewater is essential for preventing eutrophication and protecting environmental quality. Lanthanum [La(III)]-containing materials can effectively and selectively remove orthophosphate (PO₄) from aqueous systems, but there remains a need to better understand the underlying mechanism of PO₄ removal. Our objectives were to 1) identify the mechanism of PO₄ removal by La-containing materials and 2) evaluate the ability of a new material, La₂(CO₃)_3(s), to remove PO₄ from different aqueous matrices, including municipal wastewater. We determined the dominant mechanism of PO₄ removal by comparing geochemical simulations with equilibrium data from batch experiments and analyzing reaction products by X-ray diffraction and scanning transmission electron microscopy with energy dispersive spectroscopy. Geochemical simulations of aqueous systems containing PO₄ and La-containing materials predicted that PO₄ removal occurs via precipitation of poorly soluble LaPO_4(s). Results from batch experiments agreed with those obtained from geochemical simulations, and mineralogical characterization of the reaction products were consistent with PO₄ removal occurring primarily by precipitation of LaPO_4(s). Between pH 1.5 and 12.9, La₂(CO₃)_3(s) selectively removed PO₄ over other anions from different aqueous matrices, including treated wastewater. However, the rate of PO₄ removal decreased with increasing solution pH. In comparison to other solids, such as La(OH)_3(s), La₂(CO₃)_3(s) exhibits a relatively low solubility, particularly under slightly acidic conditions. Consequently, release of La³⁺ into the environment can be minimized when La₂(CO₃)_3(s) is deployed for PO₄ sequestration.

Phosphate removal by a La(OH)3 loaded magnetic MAPTAC-based cationic hydrogel: Enhanced surface charge density and Donnan membrane effect

Cationic hydrogels have received great attention to control eutrophication and recycle phosphate. In this study, a type of La(OH)₃ loaded magnetic MAPTAC-based cationic hydrogel (La(OH)₃@MMCH) was developed as a potential adsorbent for enhanced phosphate removal from aqueous environment. La(OH)₃@MMCH exhibited high adsorption capacity of 105.72±5.99 mg P/g, and reached equilibrium within 2 hr. La(OH)₃@MMCH could perform effectively in a wide pH range from 3.0 to 9.0 and in the presence of coexisting ions (including SO₄^2-, Cl^-, NO₃^-, HCO₃^-, SiO₄^4- and HA). The adsorption-desorption experiment indicated that La(OH)₃@MMCH could be easily regenerated by using NaOH-NaCl as the desorption agent, and 73.3% adsorption capacity remained after five cycles. Moreover, La(OH)₃@MMCH was employed to treat surface water with phosphate concentration of 1.90  mg/L and showed great removal efficiency of 95.21%. Actually, MMCH showed high surface charge density of 34.38-59.38 meq/kg in the pH range from 3.0 to 11.0 and great swelling ratio of 3014.57% within 24 h, indicating that MMCH could produce the enhanced Donnan membrane effect to pre-permeate phosphate. Furthermore, the bifunctional structure of La(OH)₃@MMCH enabled it to capture phosphate through electrostatic attraction and ligand exchange. All the results prove that La(OH)₃@MMCH is a promising adsorbent for eutrophication control and phosphate recovery.

Effective and selective adsorption of La3+ by a poly-N-isopropylacrylamide phosphoric modified cellulose aerogel

Synthesis diagram of CNC-P-PNIPAM aerogel material.

Phosphate removal from aqueous solution by Fe-La binary (hydr)oxides: characterizations and mechanisms

In this study, Fe-La binary (hydr)oxides were prepared by a co-precipitation method for phosphate removal. Various techniques, including secondary electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), powder X-ray diffraction (p-XRD), and Brunauer-Emmett-Teller (BET) surface area analysis, were employed to characterize the synthesized Fe-La binary (hydr)oxides. Batch experiments indicated that the performance of phosphate removal by Fe-La binary (hydr)oxides was excellent and increased with increasing the concentrations of La. The kinetics study showed that the adsorption was rapid and described better by the pseudo-second-order equation. The maximum adsorption capacities of Fe/La 3:1, Fe/La 1:1, and Fe/La 1:3 binary (hydr)oxides at pH 4.0 calculated by Langmuir model were 49.02, 69.44, and 136.99 mg/g, respectively. The uptake of phosphate was highly affected by solution pH and significantly reduced with the increase of pH value. The analyses of p-XRD, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) suggested that the predominant mechanisms of phosphate removal involved surface hydroxyl exchange reactions and co-precipitation of released La³⁺ and phosphate ions, which resulted into the formation of amorphous phase of rhabdophane (LaPO₄·0.5H₂O). The results show great potential for the application on the treatment of phosphate decontamination for their high efficiency of phosphate removal.

Recent advances and challenges on removal and recycling of phosphate from wastewater using biomass-derived adsorbents

As the severe damage of phosphate enrichment in the water ecosystem and the supply shortage of phosphate rock, developing an efficient method for the removal and recycling of phosphate from wastewater is of great significance. To achieve this goal, adsorption technology has been widely investigated, and various adsorbents were developed. Among them, the biomass-derived adsorbents including biomass-derived carbon-based materials, biomass-based anion exchangers and metal-biomass composites have attracted increasing attention over the past years due to the low cost, abundant renewable raw materials and environmental friendliness. However, different adsorbents usually exhibit variable adsorption performances for phosphate, which highly depends on their design strategies, preparation methods and potential adsorption mechanisms. Thus, this review comprehensively summarizes the recent researches on the removal and recycling of phosphate from wastewater using the biomass-derived adsorbents. Especially, the design strategies, preparation methods, adsorption performances and mechanisms of these reported biomass-derived adsorbents are discussed in detail. Moreover, as the significant strategies to recover and recycling phosphate, the elution and direct use of phosphate-loaded adsorbents as fertilizers are also presented. Although the excellent adsorption performance has been obtained, some challenges are still existing, which should be given more attention in the following researches to facilitate the development and industrial application of biomass-derived adsorbents.

Temperature-dependent magnesium citrate modified formation of MgO nanoparticles biochar composites with efficient phosphate removal

Nano-MgO biochar composites (nMBCs) have been considered as potential adsorbents for phosphate removal from aqueous solution. It is an effective strategy to improve P removal efficiency that adjustment of the size, distribution and crystallinity of MgO particles embedded into the carbon matrix. Herein, we prepared a highly efficient phosphate adsorbent by co-pyrolysis of lotus seedpod and magnesium citrate and studied its adsorption mechanisms. Results showed that the uniformly dispersed MgO nanoparticle was formed on the surface of nMBCs with the temperature increasing, with the particles size ranging from 3 to 10 nm. Furthermore, high temperature promoted the formation of a large amount of reactive lattice oxygen, which was demonstrated to be the main active adsorption site, thus the phosphate immobilization capacity of nMBCs was greatly improved with the pyrolysis temperature increasing from 450 °C to 750 °C. Besides, some stable CO bonds were formed due to the catalysis of Mg²⁺, which could bond to HPO₄^2-/H₂PO₄^- by hydrogen bond, enhancing the adsorption performance. The isotherm adsorption experiment showed that MBC-750 achieved an excellent phosphorus adsorption amount of 452.752 mg-P/g. The effectiveness of nMBCs is enhanced and a method for producing an effective nanocomposite adsorbent material for removing phosphate from wastewater is provided.

Nitrogen-doped lignin-derived biochar with enriched loading of CeO2 nanoparticles for highly efficient and rapid phosphate capture

Development of lignin-derived carbon adsorbents with ultrahigh phosphate adsorption activity and rapid adsorption kinetics is of great importance, yet limited success has been achieved. Herein, we develop a CeO₂ functionalized N-doped lignin-derived biochar (Ce@NLC) via a cooperative modification strategy for effective and fast phosphate capture. The novel modification strategy not only contributes greatly to the loading of well-dispersed CeO₂ nanoparticles with a smaller size, but also significantly increases the relative concentration of Ce(III) species on Ce@NLC. Consequently, an enhanced capture capacity for phosphate (196.85 mg g^-1) as well as extremely rapid adsorption kinetics were achieved in a wide operating pH range (2-10). Interestingly, Ce@NLC exhibited a strong phosphate adsorption activity at even low-concentration phosphorus-containing water. The removal efficiency and final P concentration reached 99.87% and 2.59 μg P L^-1 within 1 min at the phosphate concentration of 2 mg P L^-1. Experiments and characterization indicated that Ce(III) species plays a predominant role for the phosphate capture, and ligand exchange, together with electrostatic attraction, are the main adsorption mechanism. This work develops not only an efficient carbon-based adsorbent for phosphate capture, but also promotes the high-value application of industrial lignin.

Enhanced adsorption activity for phosphate removal by functional lignin-derived carbon-based adsorbent: Optimization, performance and evaluation

Design of carbon-based adsorbents derived from industrial lignin with superior phosphate adsorption performance is of great significance, yet limited researches have been reported. Here, we report a MgO-functionalized lignin-based bio-charcoal (MFLC) as an efficient adsorbent for phosphate removal. The obtained MgO nanoparticles were dispersed homogeneously on MFLC with particle size of 50-100 nm and higher loading content (28.41%). Benefiting from the favorable morphology of MgO nanoparticles, the MFLC exhibits excellent regeneration ability for phosphate adsorption, which can be applied in a wide range of pH values (2-10). The maximum adsorption capacity could reach to 906.82 mg g^-1 for phosphate. Interestingly, the MFLC shows extremely high adsorption activity in the low concentration of phosphate (2 mg P L^-1), and its phosphate removal efficiency achieves 99.76%. Furthermore, the results also indicated that the higher loading content of MgO together with smaller particle size can effectively enhance the phosphate adsorption activity of MFLC. The adsorption mechanism revealed that the adsorption of phosphate on the surface of MFLC belongs to single-layer chemisorption, and ligand exchange plays a crucial role during adsorption/desorption. This work not only develops a new strategy for the preparation of high-efficiency carbon-based adsorbents, but also facilitates the value-added utilization of industrial lignin.

Remarkable phosphate recovery from wastewater by a novel Ca/Fe composite: Synergistic effects of crystal structure and abundant oxygen-vacancies

Calcium-based materials are considered to be promising adsorbents for phosphate removal in the water environment due to their environmental friendliness and low price. However, improving the efficiency and rate of P adsorption of calcium-based materials still needs further exploration. In this study, a high-efficiency and eco-friendly Ca/Fe composite was rationally designed and fabricated by a co-precipitated method. Batch adsorption experiments showed that Ca/Fe composites with a Ca: Fe molar ratio of 3: 1 exhibited a remarkable phosphate sorption capacity of 161.4 mg P/g. Furthermore, the phosphate adsorption capacity of Ca/Fe-3/1 composite was maintained relatively high at pH 3-11 due to the ligand exchange, electrostatic and chemical precipitation. In addition, the experiment performed to determine the effect of coexisting ions shows that only carbonate ions slightly inhibit the phosphate adsorption effect of the Ca/Fe-3/1 composite. The newly prepared Ca/Fe composites have a fast phosphate removal efficiency. The XPS and EPR analysis showed that a large number of oxygen vacancies were formed on Ca/Fe composites due to the introduction of magnetic Fe. This is the first time to introduction oxygen vacancies into Ca/Fe composites by co-precipitation. The existence of oxygen vacancies can promote electron transfer rate and reduce the bonding energy barrier for phosphate adsorption, thereby increasing the phosphate absorption rate of the Ca/Fe composites. The enhanced phosphate removal by Ca/Fe composites with abundant oxygen vacancies provides a new strategy for the preparation of commercial phosphate -controlling materials.

MOFs-derived conductive structure for high-performance removal/release of phosphate as electrode material

Porous metal-organic frameworks (MOFs) have drawn increasing attention as promising phosphate adsorbents. Yet the potential agglomeration of MOFs particles and the difficult collection process largely thwarted their application. Meanwhile, adsorbents regeneration might destroy MOFs structures due to the use of strong alkaline solution. In this work, we reported a strategy for designing and fabricating an electrode to remove phosphate based on MIL-101 derived metal/carbon via a two-step carbonization step, which not only introduced C doping but also created a stable structure. With the assistance of electric field, the migration and capture of phosphate anions were greatly enhanced. Under 1 V condition, the material exhibited a high maximum removal capacity of 97.73 mg P/g. Adsorption kinetics and parameters for phosphate at different conditions were analyzed. Langmuir and Freundlich isotherms were employed to validate the adsorption data. More importantly, the regeneration of electrode was achieved in a more facile and efficient way than micro/ nanoparticles adsorbents by simple voltage control. Such an intriguing approach may provide a new platform to further expand the use of MOFs for adsorption process.

Developing the new kinetics model based on the adsorption process: From fitting to comparison and prediction

In this study, an intrinsic kinetics model was proposed to simulate the adsorption process. The kinetics model was established based on the collision theory, where the available adsorption site and residual adsorbate concentration were considered. The model specifically highlights the significance of initial conditions in its equation. The initial reaction condition is expressed by the model parameter ξ, which includes four factors: concentration, volume, adsorbent dosage and adsorption capacity. The applicability of this model was mainly explored with the phosphate adsorption process by layered double hydroxides (LDH). Experimental results indicate that, at a certain initial condition, the intrinsic kinetics rate coefficient exhibits a superior stability, making the adsorption rate become comparable among different materials. On this basis, the kinetics rate coefficients of 60 materials were compared, and the LDH was proved to be advantageous in phosphate removal rate. Additionally, the intrinsic kinetics model was successfully applied to predict the phosphate adsorption kinetics under a wide range of initial conditions. The predicted concentration throughout the entire adsorption process is well consistent with the evolution of experimental data. This model is an effort to advance the kinetics analysis from fitting to comparison and prediction.

Molecular-level investigations of effective biogenic phosphorus adsorption by a lanthanum/aluminum-hydroxide composite

Biogenic phosphorus (P), such as organic P and inorganic pyrophosphates, could substantially contribute towards eutrophication in aquatic systems by internal loading of P from sediment through P species transformation. Previous eutrophication management studies mainly focus on the removal of orthophosphate (Ortho-P), however, an effective approach for biogenic P control from water sources, prior to incorporation in sediment, is still lacking. In this study, a lanthanum/aluminum-hydroxide (LAH) composite was demonstrated to provide both superior removal of Ortho-P and biogenic P, employing myo-inositol hexakisphosphate (IHP) and pyrophosphate (Pyro-P) as model compounds. The maximum IHP and Pyro-P adsorption capacities by LAH attained 36.4 and 21.8 mg P g^-1, respectively. In order to understand the mechanisms of adsorption, zeta potential, ³¹P solid-state nuclear magnetic resonance (NMR) spectroscopy and P K-edge X-ray absorption near edge structure (XANES) techniques were used to characterize the LAH after adsorption. The results supported the hypothesis that the interaction between LAH and P species was through surface adsorption, by the formation of inner-sphere complexes. Linear combination fitting results of XANES data indicated that IHP and Pyro-P preferentially bonded with La-hydroxide in LAH. This study elucidates the adsorption properties and binding mechanisms of IHP and Pyro-P on lanthanum-bearing compounds at the molecular level, indicating that LAH is a promising material for the control of eutrophication.

Fabrication and evaluation of a regenerable HFO-doped agricultural waste for enhanced adsorption affinity towards phosphate

Chemical modification of agricultural waste biomass has proved to be an economy and effective approach to capture phosphate ions, except for that under acidic conditions and highly competitive ion systems. According to this, a new nanocomposite (HFO@St+) was fabricated by incorporating nano-sized hydrous Fe(III) oxides (HFO) within aminated wheat straw in order to overcome the bottleneck. The optimal pH of phosphate uptake by HFO@St+ was greatly broadened and observed over a wide pH range between 2.0 and 7.0. The binary exchange reaction indicated that phosphate was strongly and preferably adsorbed by HFO@St+ with the separation factor K of phosphate over nitrate increasing from 0.23-1 or 0.20-0.26 to 2.5-38 or 2.5-15 for near neutral or acidic pHs, respectively. The sorption selectivity for HFO@St+ followed the order of phosphate > nitrate > chloride under experimental conditions. The presence of inorganic and organic ligands (SO₄ and HA) showed no significant effect on phosphate adsorption. XPS and FT-IR analyses were performed to explore the underlying mechanism of adsorption. The exhausted material could be regenerated with NaOH-NaCl solution for at least ten cycles, indicating that HFO@St+ can be used as a sustainable biomass product with excellent adsorption affinity for phosphate removal.

Selective Phosphate Removal from Water and Wastewater using Sorption: Process Fundamentals and Removal Mechanisms

Eutrophication of water bodies is a serious and widespread environmental problem. Achieving low levels of phosphate concentration to prevent eutrophication is one of the important goals of the wastewater engineering and surface water management. Meeting the increasingly stringent standards is feasible in using a phosphate-selective sorption system. This critical review discusses the most fundamental aspects of selective phosphate removal processes and highlights gains from the latest developments of phosphate-selective sorbents. Selective sorption of phosphate over other competing anions can be achieved based on their differences in acid-base properties, geometric shapes, and metal complexing abilities. Correspondingly, interaction mechanisms between the phosphate and sorbent are categorized as hydrogen bonding, shape complementarity, and inner-sphere complexation, and their representative sorbents are organic-functionalized materials, molecularly imprinted polymers, and metal-based materials, respectively. Dominating factors affecting the phosphate sorption performance of these sorbents are critically examined, along with a discussion of some overlooked facts regarding the development of high-performance sorbents for selective phosphate removal from water and wastewater.