In Situ Photoelectrochemical Chloride Activation Using a WO3 Electrode for Oxidative Treatment with Simultaneous H2 Evolution under Visible Light

Organic Upgrading through Photoelectrochemical Reactions: Toward Higher Profits

Aqueous photoelectrochemical (PEC) cells have long been considered a promising technology to convert solar energy into hydrogen. However, the solar-to-H2 (STH) efficiency and cost-effectiveness of PEC water splitting are significantly limited by sluggish oxygen evolution reaction (OER) kinetics and the low economic value of the produced O2 , hindering the practical commercialization of PEC cells. Recently, organic upgrading PEC reactions, especially for alternative OERs, have received tremendous attention, which improves not only the STH efficiency but also the economic effectiveness of the overall reaction. In this review, PEC reaction fundamentals and reactant-product cost analysis of organic upgrading reactions are briefly reviewed, recent advances made in organic upgrading reactions, which are categorized by their reactant substrates, such as methanol, ethanol, glycol, glycerol, and complex hydrocarbons, are then summarized and discussed. Finally, the current status, further outlooks, and challenges toward industrial applications are discussed.

Boosted Electrocatalytic Degradation of Levofloxacin by Chloride Ions: Performances Evaluation and Mechanism Insight with Different Anodes

As chloride (Cl-) is a commonly found anion in natural water, it has a significant impact on electrocatalytic oxidation processes; yet, the mechanism of radical transformation on different types of anodes remains unexplored. Therefore, this study aims to investigate the influence of chlorine-containing environments on the electrocatalytic degradation performance of levofloxacin using BDD, Ti4O7, and Ru-Ti electrodes. The comparative analysis of the electrode performance demonstrated that the presence of Cl- improved the removal and mineralization efficiency of levofloxacin on all the electrodes. The enhancement was the most pronounced on the Ti4O7 electrode and the least significant on the Ru-Ti electrode. The evaluation experiments and EPR characterization revealed that the increased generation of hydroxyl radicals and active chlorine played a major role in the degradation process, particularly on the Ti4O7 anode. The electrochemical performance tests indicated that the concentration of Cl- affected the oxygen evolution potentials of the electrode and consequently influenced the formation of hydroxyl radicals. This study elucidates the mechanism of Cl- participation in the electrocatalytic degradation of chlorine-containing organic wastewater. Therefore, the highly chlorine-resistant electrocatalytic anode materials hold great potential for the promotion of the practical application of the electrocatalytic treatment of antibiotic wastewater.

Bias-free driven ion assisted photoelectrochemical system for sustainable wastewater treatment

Photoelectrochemical (PEC) systems have emerged as a prominent renewable energy-based technology for wastewater treatment, offering sustainable advantages such as eliminating dependence on fossil fuels or grid electricity compared to traditional electrochemical treatment methods. However, previous PEC systems often overlook the potential of ions present in wastewater as an alternative to externally applied bias voltage for enhancing carrier separation efficiency. Here we report a bias-free driven ion assisted photoelectrochemical (IAPEC) system by integration of an electron-ion acceptor cathode, which leverages its fast ion-electron coupling capability to significantly enhance the separation of electrons and holes at the photoanode. We demonstrate that Prussian blue analogues (PBAs) can serve as robust and reversible electron-ion acceptors that provide reaction sites for photoelectron coupling cations, thus driving the hole oxidation to produce strong oxidant free radicals at photoanode. Our IAPEC system exhibits superior degradation performance in wastewater containing chloride medium. This indicates that, in addition to the cations (e.g., Na+) accelerating the electron transfer rate, the presence of Cl- ions further enhance efficient and sustainable wastewater treatment. This work highlights the potential of utilizing abundant sodium chloride in seawater as a cost-effective additive for wastewater treatment, offering crucial insights into the use of local materials for effective, low-carbon, and sustainable treatment processes.

Photoinduced absorption spectroscopy (PIAS) study of water and chloride oxidation by a WO3 photoanode in acidic solution

The mechanisms of water and chloride oxidation by a WO3 photoanode are probed by photoinduced absorption spectroscopy (PIAS) coupled with transient photocurrent (TC) measurements. Linear sweep voltammograms (LSVs) and incident photon to current efficiencies (IPCEs) are obtained, in the water oxidation electrolyte (1 M HClO4) and chloride oxidation electrolyte (3.5 M NaCl in 1 M HClO4). Other work shows that the faradaic efficiency of water oxidation to O2 in 1 M HClO4 is ca. 1.0, and that for chloride oxidation to Cl2 in 3.5 M NaCl plus 1 M HClO4 is ca. 0.62. The PIAS/TC data reveals a 0.4 order dependency of the rate of water oxidation on the steady state concentration of photogenerated surface holes, [hs+]ss, and an approximately first order dependency of the rate of chloride oxidation on [hs+]ss. Associated mechanisms and rate determining steps for water and chloride oxidation at the photoanode surface that account for these reaction orders are proposed.

Defective TiO2 Nanotube Arrays for Efficient Photoelectrochemical Degradation of Organic Pollutants

Oxygen vacancies (OVs) are one of the most critical factors that enhance the electrical and catalytic characteristics of metal oxide-based photoelectrodes. In this work, a simple procedure was applied to prepare reduced TiO₂ nanotube arrays (NTAs) (TiO_2-x) via a one-step reduction method using NaBH₄. A series of characterization techniques were used to study the structural, optical, and electronic properties of TiO_2-x NTAs. X-ray photoelectron spectroscopy confirmed the presence of defects in TiO_2-x NTAs. Photoacoustic measurements were used to estimate the electron-trap density in the NTAs. Photoelectrochemical studies show that the photocurrent density of TiO_2-x NTAs was nearly 3 times higher than that of pristine TiO₂. It was found that increasing OVs in TiO₂ affects the surface recombination centers, enhances electrical conductivity, and improves charge transport. For the first time, a TiO_2-x photoanode was used in the photoelectrochemical (PEC) degradation of a textile dye (basic blue 41, B41) and ibuprofen (IBF) pharmaceutical using in situ generated reactive chlorine species (RCS). Liquid chromatography coupled with mass spectrometry was used to study the mechanisms for the degradation of B41 and IBF. Phytotoxicity tests of B41 and IBF solutions were performed using Lepidium sativum L. to evaluate the potential acute toxicity before and after the PEC treatment. The present work provides efficient PEC degradation of the B41 dye and IBF in the presence of RCS without generating harmful products.

Investigation of BiVO4-based advanced oxidation system for decomposition of organic compounds and production of reactive sulfate species

Growth of population and expansion of industries lead to increasing contamination of environment with various organic pollutants. If not properly cleaned, wastewater contaminates freshwater resources, aquatic environment and has huge negative impact on ecosystems, quality of drinking water and human health, therefore new and effective purification systems are in demand. In this work bismuth vanadate-based advanced oxidation system (AOS) for the decomposition of organic compounds and production of reactive sulfate species (RSS) was investigated. Pure and Mo-doped BiVO₄ coatings were synthesized using sol-gel process. Composition and morphology of coatings were characterized using X-ray diffraction and scanning electron microscopy techniques. Optical properties were analyzed using UV-vis spectrometry. Photoelectrochemical performance was studied using linear sweep voltammetry, chronoamperometry and electrochemical impedance spectroscopy. It was shown that increase in Mo content affects the morphology of BiVO₄ films, reduces charge transfer resistance and enhances the photocurrent in the solutions of sodium borate buffer (with and without glucose) and Na₂SO₄. Mo-doping of 5-10 at.% leads to 2- to 3-fold increase in photocurrents. Faradaic efficiencies of RSS formation ranged between 70 and 90 % for all samples irrespective of Mo content. All studied coatings demonstrated high stability in long-lasting photoelectrolysis. In addition, effective light-assisted bactericidal performance of the films in deactivation of Gram positive Bacillus sp. bacteria was demonstrated. Advanced oxidation system designed in this work can be applied in sustainable and environmentally friendly water purification systems.

Directional Separation of Highly Reductive Electrons to the Reactive Center in a Magnetic S-Scheme ZnFe2O4/A-MoS2 Heterojunction for Enhanced Peroxymonosulfate Activation toward Pharmaceuticals and Personal Care Product Removal

Pharmaceuticals and personal care products (PPCPs) are ubiquitous in sewage, adversely affecting ecosystems and human health. In this study, an S-scheme magnetic ZnFe₂O₄/ammoniated MoS₂ (ZnFe₂O₄/A-MoS₂) heterojunction as a visible-light-driven PMS activator for PPCP degradation was developed. ZnFe₂O₄/A-MoS₂ achieves improved photocatalytic activity because the construction of S-scheme heterojunction promotes the separation of the highly reductive photogenerated electrons. The optimized photocatalyst (10%-ZnFe₂O₄/A-MoS₂, 0.2 g/L) achieved 100% removal of 2 ppm carbamazepine (CBZ) within 2.5 min at a PMS dosage of 0.5 mM (initial pH 7.0). Mechanistic investigation revealed that the separated electrons to the ZnFe₂O₄ reactive center of the heterojunction facilitated PMS activation and generated SO₄^·- as the dominant reactive species for CBZ degradation. The system exhibited excellent practicability in various samples of actual sewage, where most sewage components negatively impacted CBZ degradation. Further, the chloride ions in high-salinity sewage could be activated to generate additional reactive chlorine species for PPCP degradation. The heterojunction possesses outstanding reusability and stability in treating various water conditions. This work provides mechanistic and practical perspectives in developing novel S-type heterojunctions for recalcitrant pollutant treatment.

Nitrogen-containing wastewater fuel cells for total nitrogen removal and energy recovery based on Cl•/ClO• oxidation of ammonia nitrogen

The excess nitrogen discharge into water bodies has resulted in extensive water pollution and human health risks, which has become a critical global issue. Moreover, nitrogenous wastewater contains considerable chemical energy contributed by organic pollutants and nitrogenous compounds. Therefore, the treatment of various kinds of nitrogen-containing wastewater for nitrogen removal and energy recovery is of significance. Biological methode and advanced oxidation processes (AOPs) are the main methods for nitrogen removal. However, biological treatment is easily inhibited by high-salinity, high ammonia nitrogen (NH₃-N/NH₄⁺-N), nitrite and toxic organics in wastewater, which limits its application. AOPs mainly induce in situ generation of highly reactive species, such as hydroxyl radical (HO•), sulfate radical (SO₄•^-) and chlorine radicals (Cl•, ClO•, Cl₂•^-), for nitrogen removal. Nevertheless, HO• shows low reactivity and N₂ selectivity towards NH₃-N/NH₄⁺-N oxidation, and SO₄•^- also demonstrates unsatisfactory NH₃-N/NH₄⁺-N removal. It has been shown that Cl•/ClO• can efficiently remove NH₃-N/NH₄⁺-N with high N₂ selectivity. The generation of Cl•/ClO• can be triggered by various techniques, among which the PEC technique shows great potential due to its higher efficiency for Cl•/ClO• generation and eco-friendly approach for pollutants degradation and energy recovery by utilizing solar energy. Cl•/ClO• oxidation of NH₃-N/NH₄⁺-N and nitrate nitrogen (NO₃^--N) reduction can be strengthened through the design of photoanode and cathode materials, respectively. Coupling with this two pathways, an exhaustive total nitrogen (TN) removal system is designed for complete TN removal. When introducing the mechanism into photocatalytic fuel cells (PFCs), the concept of nitrogen-containing wastewater fuel cells (NFCs) is proposed to treat several typical types of nitrogen-containing wastewater, achieving high-efficiency TN removal, organics degradation, toxic chlorate control, and energy recovery simultaneously. Recent research progress in this field is reviewed, summarized and discussed, and in-depth perspectives are proposed, providing new ideas for the resource treatment of nitrogen-containing wastewater.

Organics abatement and recovery from wastewater by a polymerization-based electrochemically assisted persulfate process: Promotion effect of chloride ion and its mechanism

Ubiquitous chloride ion (Cl^-) in wastewaters usually inhibits the degradation of organic contaminants and generates numerous toxic chlorinated products in conventional degradation-based advanced oxidation processes (AOPs). Herein, a more Cl^- tolerant polymerization-based electrochemical AOP for organic contaminants abatement and simultaneous organic resource recovery was demonstrated with eight typical organic contaminants and two real industrial wastewaters for the first time. This process can significantly promote dissolved organic carbon (DOC) abatement in the presence of Cl^-, differing greatly from conventional degradation-based processes. Compared to sulfate radical (SO₄^•-) (or hydroxyl radical (HO^•)), dichloride radical (Cl₂^•-) derived from Cl^- has moderate reactivity towards most contaminants, which facilitates the organics polymerization as it ensures the formation of polymerizable organic radicals while inhibiting their excessive degradation. Thus, high DOC abatement (over 75 %) and high organic resource recovery ratio (48-79 % separable organic-polymer yield) can be achieved for most contaminants. Both soluble chlorinated compounds and solid chlorinated polymers are formed in the presence of Cl^-. The chlorinated products (e.g. chlorophenols) can be polymerized as new monomers, thus the concentration of dissolved organic chlorinated products is much lower than that in conventional degradation-based process. The tolerance of the present process to Cl^- is tested in real coking wastewaters, and exceeding 60 % of the abated chemical oxygen demand (COD) is obtained in the form of recoverable organic-polymers.

Activation of chloride by oxygen vacancies-enriched TiO2 photoanode for efficient photoelectrochemical treatment of persistent organic pollutants and simultaneous H2 generation

Photoelectrochemical (PEC) activation of chloride ions (Cl^-) to degrade persistent organic pollutants (POPs) is a promising strategy for the treatment of industrial saline organic wastewater. However, the wide application of this technology is greatly restricted due to the general photoanode activation of Cl^- with poor capability, the propensity to produce toxic by-products chlorates, and the narrow pH range. Herein, oxygen vacancies-enriched titanium dioxide (O_v-TiO₂) photoanode is explored to strongly activate Cl^- to drive the deep mineralization of POPs wastewater in a wide pH range (2-12) with simultaneous production of H₂. More importantly, nearly no toxic by-product of chlorates was produced during such PEC-Cl system. The degradation efficiency of 4-CP and H₂ generation rate by O_v-TiO₂ were 99.9% within 60 min and 198.2 μmol h^-1 cm^-2, respectively, which are far superior to that on the TiO₂ (33.1% within 60 min, 27.5 μmol h^-1 cm^-2) working electrode. DFT calculation and capture experiments revealed that O_v-TiO₂ with abundant oxygen vacancies is conducive to the activation of Cl^- to produce more reactive chlorine species, evidenced by its high production of free chlorine (48.7 mg L^-1 vs 7.5 mg L^-1 of TiO₂). The as-designed PEC-Cl system in this work is expected to realize the purification of industrial saline organic wastewater coupling with green energy H₂ evolution.

Efficient Bias-Free Degradation of Sulfamethazine by TiO2 Nanoneedle Arrays Photoanode and Co3O4 Photocathode System under LED-Light Irradiation

Solving high electrical-energy input for pollutants degradation is one of the core requirements for the practical application of photoelectrocatalytic (PEC) technology. Herein, we developed a self-driven dual-photoelectrode PEC system (TiO2 NNs-Co3O4) composed of a TiO2 nanoneedle arrays (TiO2 NNs) photoanode and Co3O4 photocathode for the first time. Under light-emitting-diode (LED) illumination, the bias-free TiO2 NNs-Co3O4 PEC system exhibited excellent PEC performance, with an internal bias as high as 0.19 V, achieving near complete degradation (99.62%) of sulfamethazine (SMT) with a pseudo-first-order rate constant of 0.042 min−1. The influences of solution pH, typical inorganic anions, natural organic matter, and initial SMT concentration on the PEC performance were investigated. Moreover, the main reactive oxygen species (h+, •OH, •O2−) in the dual-photoelectrode PEC system for SMT decomposition were elaborated. The practical application feasibility for efficient water purification of this unbiased PEC system was evaluated. It was proved that the TiO2 NNs photoanode provided a negative bias while the Co3O4 photocathode provided a positive bias for the photoanode, which made this system operate without external bias. This work elucidated the cooperative mechanism of photoelectrodes, providing guidance to develop a sustainable, efficient, and energy-saving PEC system for wastewater treatment.

Integrating Reactive Chlorine Species Generation with H2 Evolution in a Multifunctional Photoelectrochemical System for Low Operational Carbon Emissions Saline Sewage Treatment

Conventional wastewater treatment plants (WWTPs) suffer from high carbon emissions and are inefficient in removing emerging organic pollutants (EOPs). Consequently, we have developed a low operational carbon emissions multifunctional photoelectrochemical (PEC) system for saline sewage treatment to simultaneously remove organic pollutants, ammonia, and bacteria, coupled with H₂ evolution. A reduced BiVO₄ (r-BiVO₄) photoanode with enhanced PEC properties, ascribed to constructing sufficient oxygen vacancies and V⁴⁺ species, was synthesized for the aforementioned technique. The PEC/r-BiVO₄ process could treat saline sewage to meet local WWTPs' discharge standard in 40 min at 2.0 V vs Ag/AgCl and completely degrade carbamazepine (one of EOPs), coupled with 633 μmol of H₂ production; 93.29% reduction in operational carbon emissions and 77.82% decrease in direct emissions were achieved by the PEC/r-BiVO₄ process compared with large-scale WWTPs, attributed to the restrained generation of CH₄ and N₂O. The PEC system activated chloride ions in sewage to generate numerous reactive chlorine species and facilitate ^•OH production, promoting contaminants removal. The PEC system exhibited operational feasibility at varying pH and total suspended solids concentrations and has outstanding reusability and stability, confirming its promising practical potential. This study proposed a novel PEC reaction for reducing operational carbon emissions from saline sewage treatment.

Peroxymonosulfate enhanced photoelectrocatalytic oxidation of organic contaminants and simultaneously cathodic recycling of silver

Degradation of organic contaminants with simultaneous recycling of Ag⁺ from silver-containing organic wastewater such as photographic effluents is desired. Although photoelectrocatalysis (PEC) technology is a good candidate for this type of wastewater, its reaction kinetics still needs to be improved. Herein, peroxymonosulfate (PMS) was employed to enhance the PEC kinetics for oxidation of phenol (PhOH) at the anode and reduction of Ag⁺ at the cathode. The degradation efficiency of phenol (PhOH, 0.1 mmol/L) was increased from 42.8% to 96.9% by adding 5 mmol/L PMS at a potential of 0.25 V. Meanwhile, the Ag (by wt%) deposited on the cathode was 28.1% (Ag₂O) in PEC process, while that of Ag (by wt%) was 69.7% (Ag⁰) by adding PMS. According to the electrochemistry analysis, PMS, as photoelectrons acceptor, enhances the separation efficiency of charges and the direct h⁺ oxidation of PhOH at the photoanode. Meantime, the increasing cathode potential avoided H₂ evolution and strongly alkaline at the surface of cathode, thus enabling the deposition of Ag⁺ in the form of metallic silver with the help of PMS. In addition, PMS combined with PEC process was effective in treating photographic effluents.

A novel electrocatalytic system with high reactive chlorine species utilization capacity to degrade tetracycline in marine aquaculture wastewater

The problems of high salinity and coexistence of antibiotics in mariculture wastewater pose a great challenge to the traditional wastewater treatment technology. Herein, an electrocatalytic system based on cathodes to sustain reactive chlorine species (RCS) in a high chlorine environment was proposed. The results show that the content of RCS is affected by cathodes. The electrocatalytic system with FeNi/NF as cathode has the largest RCS retention capacity when compared with other cathode systems (carbon felt, nickel foam, copper foam, stainless steel, and nickel-iron foam). This is related to FeNi/NF's higher hydrogen production activity, which inhibits the reduction reaction of RCS. Furthermore, the degradation of tetracycline by the proposed FeNi/NF system maintained long-term effective performance across 20 cycles. Thus, the application of high chlorine resistance electrocatalysis system provides a possibility for practical electrocatalysis treatment of mariculture wastewater.

Improving Wastewater Treatment by Triboelectric-Photo/Electric Coupling Effect

The ability to meet higher effluent quality requirements and the reduction of energy consumption are the biggest challenges in wastewater treatment worldwide. A large proportion of the energy generated during wastewater treatment processes is neglected and lost in traditional wastewater treatment plants. As a type of energy harvesting system, triboelectric nanogenerators (TENGs) can extensively harvest the microscale energies generated from wastewater treatment procedures and auxiliary devices. This harvested energy can be utilized to improve the removal efficiency of pollutants through photo/electric catalysis, which has considerable potential application value in wastewater treatment plants. This paper gives an overall review of the generated potential energies (e.g., water wave energy, wind energy, and acoustic energy) that can be harvested at various stages of the wastewater treatment process and introduces the application of TENG devices for the collection of these neglected energies during wastewater treatment. Furthermore, the mechanisms and catalytic performances of TENGs coupled with photo/electric catalysis (e.g., electrocatalysis, photoelectric catalysis) are discussed to realize higher pollutant removal efficiencies and lower energy consumption. Then, a thorough, detailed investigation of TENG devices, electrode materials, and their coupled applications is summarized. Finally, the intimate coupling of self-powered photoelectric catalysis and biodegradation is proposed to further improve removal efficiencies in wastewater treatment. This concept is conducive to improving knowledge about the underlying mechanisms and extending applications of TENGs in wastewater treatment to better solve the problems of energy demand in the future.

Enhanced photoelectrocatalytic degradation of diclofenac sodium using a system of Ag-BiVO4/BiOI anode and Ag-BiOI cathode

We report the photoelectrocatalysis of diclofenac sodium using a reactor consisting of Ag-BiVO4/BiOI anode and Ag-BiOI cathode. The electrodes were prepared through electrodeposition on FTO glass and modified with Ag nanoparticles through photodeposition. The structural and morphological studies were carried out using XRD, SEM, and EDS which confirmed the successful preparation of the materials. The optical properties as observed with UV-DRS revealed that the electrodes were visible light active and incorporation of metallic Ag particles on the surface increased the absorption in the visible light region. Presence of p-n heterojunction in the anode led to decrease in the spontaneous recombination of photoexcited electron-hole pairs as seen in the photocurrent response. The results from photoelectrocatalytic degradation experiments revealed that replacing platinum sheet with Ag-BiOI as counter electrode resulted in higher (92%) and faster removal of diclofenac sodium as evident in the values of apparent rate constants. The reaction mechanism further revealed that efficiently separated photogenerated holes played a major role in the degradation of the pharmaceutical. The prepared electrodes showed good stability and impressive reusability. The reports from this study revealed that the dual photoelectrodes system has a great potential in treating pharmaceutical polluted wastewater using visible light irradiation.

Superior degradation of phenolic contaminants in different water matrices via non-radical Fenton-like mechanism mediated by surface-disordered WO3

Heterogeneous Fenton-like catalysis mediated by solid catalyst is a promising oxidation technology for water purification. The redox reactivity, cost-effectiveness, and environmental compatibility of solid catalyst play governing roles in oxidant activation, radical generation, and pollutant degradation. Herein, the surface-disordered WO₃ (D-WO₃) functionally engineered by the unique crystalline-amorphous core-shell structure is proven to be a superior solid catalyst of heterogeneous Fenton-like catalysis for peroxymonosulfate (PMS) activation and pollutant degradation in various water matrices. Six typical phenolic and dye pollutants are effectively and selectively degraded in the D-WO₃/PMS system with much reduced matrix effects. Both radical identifying and scavenging tests elucidate the important role of non-radical ¹O₂ and mediated electron transfer during PMS activation on the D-WO₃ surface. The superior Fenton-like activity of D-WO₃ can be mainly attributed to the surface and sub-surface distorted lattice sites with finely tailored atomic and electronic structures and surface chemistry. These distorted lattice sites can thermodynamically serve as the key reactive centers of dissociative adsorption and catalytic activation for both PMS and pollutant, with high adsorption energy, strong structural activation, and smooth electron transfer. Our findings provide a new chance for heterogeneous Fenton-like catalysis mediated by transition metal oxides with high capacity, low cost, and no toxicity for promising water purification.

Iron Phosphide Precatalyst for Electrocatalytic Degradation of Rhodamine B Dye and Removal of Escherichia coli from Simulated Wastewater

Electrocatalysis using low-cost materials is a promising, economical strategy for remediation of water contaminated with organic chemicals and microorganisms. Here, we report the use of iron phosphide (Fe2P) precatalyst for electrocatalytic water oxidation; degradation of a representative aromatic hydrocarbon, the dye rhodamine B (RhB); and inactivation of Escherichia coli (E. coli) bacteria. It was found that during anodic oxidation, the Fe2P phase was converted to iron phosphate phase (Fe2P-iron phosphate). This is the first report that Fe2P precatalyst can efficiently catalyze electrooxidation of an organic molecule and inactivate microorganisms in aqueous media. Using a thin film of Fe2P precatalyst, we achieved 98% RhB degradation efficiency and 100% E. coli inactivation under an applied bias of 2.0 V vs. reversible hydrogen electrode in the presence of in situ generated reactive chlorine species. Recycling test revealed that Fe2P precatalyst exhibits excellent activity and reproducibility during degradation of RhB. High-performance liquid chromatography with UV-Vis detection further confirmed the electrocatalytic (EC) degradation of the dye. Finally, in tests using Lepidium sativum L., EC-treated RhB solutions showed significantly diminished phytotoxicity when compared to untreated RhB. These findings suggest that Fe2P-iron phosphate electrocatalyst could be an effective water remediation agent.

Complete solar-driven dual-photoelectrode fuel cell for water purification and power generation in the presence of peroxymonosulfate

This study reports the development of complete solar-driven dual-photoelectrode fuel cell (PFC) based on WO₃ photoanode and Cu₂O photocathode with peroxymonosulfate (PMS) serving as cathodic electron acceptor. As indicated by photoelectrochemical measurements, the PMS was able to improve thermodynamic properties of photocathode, achieving an increased open circuit potential from 0.42 V to 0.65 V vs standard hydrogen electrode (SHE). Under simulated sunlight irradiation (~100 mW cm^-2), the maximum power density of 0.12 mW cm^-2 could be obtained at current density of 0.34 mA cm^-2, which was 8.57 times of that produced by PFC without PMS (0.014 mW cm^-2). Correspondingly, adding PMS (1.0 mM) increased overall removal efficiency of 4-chlorophenol (4-CP) from 39.8% to 96.8%, accounting for the first-order kinetic constant (k=0.056 min^-1) being 6.67 times of that in the absence of PMS (k=0.0084 min^-1). Radical quenching and electron spin-resonance (ESR) results suggested the contribution of free radicals (•OH and SO₄^•-) and non-radical pathway associated with direct activation of PMS by Cu₂O photocathode. Fourier transformed infrared (FTIR) analysis confirmed the strong non-radical interaction between Cu₂O photocathode and PMS, resulting in 4-CP removal via activation of PMS by surface complex on Cu₂O. The proof-in-concept complete solar-driven dual-photoelectrode fuel cell may offer an effective manner to realize water purification and power generation, making wastewater treatment more economical and more sustainable.

Photo-assisted electrochemical advanced oxidation processes for the disinfection of aqueous solutions: A review

Disinfection is usually the final step in water treatment and its effectiveness is of paramount importance in ensuring public health. Chlorination, ultraviolet (UV) irradiation and ozone (O3) are currently the most common methods for water disinfection; however, the generation of toxic by-products and the non-remnant effect of UV and O3 still constitute major drawbacks. Photo-assisted electrochemical advanced oxidation processes (EAOPs) on the other hand, appear as a potentially effective option for water disinfection. In these processes, the synergism between electrochemically produced active species and photo-generated radicals, improve their performance when compared with the corresponding separate processes and with other physical or chemical approaches. In photo-assisted EAOPs the inactivation of pathogens takes place by means of mechanisms that occur at different distances from the anode, that is: (i) directly at the electrode's surface (direct oxidation), (ii) at the anode's vicinity by means of electrochemically generated hydroxyl radical species (quasi-direct), (iii) or at the bulk solution (away from the electrode surface) by photo-electrogenerated active species (indirect oxidation). This review addresses state of the art reports concerning the inactivation of pathogens in water by means of photo-assisted EAOPs such as photo-electrocatalytic process, photo-assisted electrochemical oxidation, photo-electrocoagulation and cathodic processes. By focusing on the oxidation mechanism, it was found that while quasi-direct oxidation is the preponderant inactivation mechanism, the photo-electrocatalytic process using semiconductor materials is the most studied method as revealed by numerous reports in the literature. Advantages, disadvantages, trends and perspectives for water disinfection in photo-assisted EAOPs are also analyzed in this work.

A Review of Photoelectrocatalytic Reactors for Water and Wastewater Treatment

The photoexcitation of suitable semiconducting materials in aqueous environments can lead to the production of reactive oxygen species (ROS). ROS can inactivate microorganisms and degrade a range of chemical compounds. In the case of heterogeneous photocatalysis, semiconducting materials may suffer from fast recombination of electron–hole pairs and require post-treatment to separate the photocatalyst when a suspension system is used. To reduce recombination and improve the rate of degradation, an externally applied electrical bias can be used where the semiconducting material is immobilised onto an electrically conducive support and connected to a counter electrode. These electrochemically assisted photocatalytic systems have been termed “photoelectrocatalytic” (PEC). This review will explain the fundamental mechanism of PECs, photoelectrodes, the different types of PEC reactors reported in the literature, the (photo)electrodes used, the contaminants degraded, the key findings and prospects in the research area.

Efficient ammonia removal and toxic chlorate control by using BiVO4/WO3 heterojunction photoanode in a self-driven PEC-chlorine system

The efficient removal of ammonia is a difficult issue in wastewater treatment because ammonia is easily converted to nitrate instead of N₂. The oxidation of ammonia by chlorine radical (Cl) is recognized as an effective method. However, the massive generation of toxic byproducts chlorate and nitrate pose great risk for its practical application due to the excessive oxidation capacity of hydroxyl radical. Herein, we propose a novel method to selectively generate Cl for efficient ammonia removal using BiVO₄/WO₃ photoanode in a self-driven photoelectrocatalytic (PEC) system. Cl was predominantly produced by regulating the valence band edge of WO₃ though modifying BiVO₄, which tuned the moderate oxidative force of hole to reduce OH generation and thereby inhibited the formation of chlorate and nitrate. The self-driven ammonia degradation was achieved by employing BiVO₄/WO₃ and Si photovoltaic cells as composite photoanodes to improve light-absorption and electron-hole separation, thus enhancing Cl production. These results showed that 10 mg L^-1 of ammonia-N was completely removed (99.3 %) in 120 min with 80.1 % of total nitrogen removal. Toxic byproducts chlorate and nitrate were inhibited by 79.3 % and 31 %, respectively, compared to WO₃. This work provides new insights to develop efficient, energy-saving and environment-friendly method for ammonia pollution treatment.

Efficient urine removal, simultaneous elimination of emerging contaminants, and control of toxic chlorate in a photoelectrocatalytic-chlorine system

Urine, which is an important waste biomass resource, is the main source of nitrogen in sewage and contains large quantities of emerging contaminants (ECs). In this study, we propose a new method to efficiently remove urine, simultaneously eliminate ECs, and control the generation of toxic chlorate during urine treatment using a photoelectrocatalytic-chlorine (PEC-Cl) system. A type-II heterojunction of WO₃/BiVO₄ was used as a photoanode to generate chlorine radicals (Cl•) by decreasing the oxidation potential of WO₃ valence band for the highly selective conversion of urine to N₂ and the simultaneous degradation of ECs in an efficient manner. The method presented surprising results. It was observed that the amount of toxic chlorate was significantly inhibited by circumventing the over-oxidation of Cl^- by holes or hydroxyl radicals (•OH). Moreover, the removal of urea nitrogen reached 97% within 90 min, while the degradation rate of trimethoprim in urine was above 98.6% within 60 min, which was eight times more than that in the PEC system (12.1%). Compared to the bare WO₃ photoanode, the toxic chlorate and nitrate generated by the WO₃/BiVO₄ heterojunction photoanode decreased by 61% and 44%, respectively. Thus, this study provides a safe, efficient, and environmentally-friendly approach for the disposal of urine.

Photo-Chlorine Production with Hydrothermally Grown and Vacuum-Annealed Nanocrystalline Rutile

Photo-generated high-energy surface states can help to produce chlorine in aqueous environments. Here, aligned rutile (TiO2) nanocrystal arrays are grown onto fluorine-doped tin oxide (FTO) substrates and activated either by hydrothermal Sr/Ba surface doping and/or by vacuum-annealing. With vacuum-annealing, highly photoactive films are obtained with photocurrents of typically 8 mA cm−2 at 1.0 V vs. SCE in 1 M KCl (LED illumination with λ = 385 nm and approx. 100 mW cm−2). Photoelectrochemical chlorine production is demonstrated at proof-of-concept scale in 4 M NaCl and suggested to be linked mainly to the production of Ti(III) surface species by vacuum-annealing, as detected by post-catalysis XPS, rather than to Sr/Ba doping at the rutile surface. The vacuum-annealing treatment is proposed to beneficially affect (i) bulk semiconductor TiO2 nanocrystal properties and electron harvesting, (ii) surface TiO2 reactivity towards chloride adsorption and oxidation, and (iii) FTO substrate performance.

One-step hydrothermal synthesis of hierarchical nanosheet-assembled Bi2O2CO3 microflowers with a {001} dominant facet and their superior photocatalytic performance

Using citric acid (CA) and 1,5-naphthalenedisulfonic acid (NDSA) as the structure-directing agent, a hierarchical flower-like Bi₂O₂CO₃ product is successfully prepared via a simple one-step hydrothermal synthesis, which is spirally assembled by the {001} facet-dominated nanosheets. It is testified that the additive CA plays an important inducing role in forming the chemical composition of Bi₂O₂CO₃, the nanosized sheet-type subunits, and the exposure of the {001} facet, while the NDSA greatly improves the dispersity and porous structure of the Bi₂O₂CO₃ microflower. Due to the nano-size effect and distortion of surface Bi-O bonds, the Bi₂O₂CO₃ microflower could be excited by the visible light to exhibit a superior photocatalytic performance in the degradation of tetracycline (TC). Besides, it is found the exposed {001} facet of Bi₂O₂CO₃ would preferentially generate holes during the illumination process, thus enhancing the photooxidative activity of the Bi₂O₂CO₃ microflower. Finally, the structural and optical features of the Bi₂O₂CO₃ microflower have been discussed in detail, and its photocatalytic mechanism has also been proposed in this work.

Recovery of Phosphorus from Hypophosphite-Laden Wastewater: A Single-Compartment Photoelectrocatalytic Cell System Integrating Oxidation and Precipitation

Recovery of phosphorus through precipitation from hypophosphite-laden wastewater is more difficult than from orthophosphate-laden wastewater because of the higher solubility of hypophosphite (H₂PO₂^-). Herein, a single-compartment photoelectrocatalytic (PEC) cell system consisting of a TiO₂/Ni-Sb-SnO₂ bifunctional photoanode and an activated carbon fiber (ACF) cathode with dosing Fe²⁺ ions was developed for recovery of phosphorus in the form of FePO₄ from hypophosphite-laden wastewater. In the PEC process, H₂PO₂^- with an initial concentration of 1.0 mM was completely oxidized and recovered within 30 min at 3.0 V, and the pseudo-first-order rate constant of H₂PO₂^- oxidation was ∼4 times than that in the electrocatalytic process and even ∼89 times than that in the photocatalytic process. The bifunctional photoanode can simultaneously generate ^•OH radicals and O₃; the ACF cathode can electrogenerate H₂O₂; H₂O₂, O₃, and the added Fe²⁺ can interact with each other to produce ^•OH radicals and Fe³⁺ ions. ^•OH radicals mainly from the Fenton process were responsible for oxidation of H₂PO₂^- to PO₄^3-, which immediately combined with Fe³⁺ to form FePO₄ at the optimized conditions to realize recovery of phosphorus. The long-term stability of this system was demonstrated. The efficiency for actual electroless nickel plating effluents was exhibited.

Paired electrolysis for simultaneous generation of synthetic fuels and chemicals

Replacing anodic oxygen evolution of water splitting or carbon dioxide reduction by electro-organic oxidation increases their product-value and energy efficiency.