Development and Application of the Diffusive Gradients in Thin-Films Technique for Measuring Psychiatric Pharmaceuticals in Natural Waters

Development and validation of an in situ high-resolution technique for measuring antibiotics in sediments

Important biogeochemical processes occur in sediments at fine scales. Sampling techniques capable of yielding information with high resolution are therefore needed to investigate chemical distributions and fluxes and to elucidate key processes affecting chemical fates. In this study, a high-resolution diffusive gradients in thin-films (DGT) technique was systematically developed and tested in a controlled sediment system to measure organic contaminants, antibiotics, for the first time. The DGT probe was used to resolve compound distributions at the mm scale. It also reflected the fluxes from the sediment pore-water and remobilization from the solid phase, providing more dynamic information. Through the fine scale detection, a reduction of re-supply was observed over time, which was concentration and location dependent. Compared to the Rhizon sampling method, antibiotic concentrations obtained by DGT probes were less than the pore-water concentrations, as DGT measures the labile fraction of the compounds. The DGT probe was also tested on an intact sediment core sampled from a lake in China and used to measure the distribution of labile antibiotics with depth in the core at the mm scale. ENVIRONMENTAL IMPLICATION: The abuse of antibiotics and widespread of their residues influences the ecosystem, induces the generation of super-bacteria, and finally poses threat to human health. Sediments adsorbs pollutants from the aquatic environment, while may also release them back to the environment. We systematically developed DGT probe approach for measuring antibiotics in sediment in situ in high resolving power, it provides information at fine scale to help us investigate biogeochemical processes take place in sediment and sediment-water interface.

Application of passive sampling device for exploring the occurrence, distribution, and risk of pharmaceuticals and pesticides in surface water

Pharmaceuticals and pesticides are compounds of high concern in surface waters around the world. However, few studies have used passive sampling methods to screen and detect these compounds in natural waters. In this study, a self-developed passive sampler was employed to measure pharmaceuticals and pesticides in the rivers of Nanjing, China. A total of 41 pharmaceuticals and 11 pesticides were detected, among which antibiotic and insecticide were the predominant classes, respectively. Valproic acid, caffeine and triclosan from the pharmaceuticals, and isoprocarb and imidacloprid from the pesticides were found frequently with high concentrations. At most sampling sites, the concentration ratios of caffeine versus carbamazepine exceeded 10, and even above 50, indicating relatively poor efficiency of wastewater treatment, or possibly the direct discharge of raw sewage, or other unknown source of pollution. It was found that the concentrations and ecological risks in the northern area of Yangtze River were higher than those in the southern area of Yangtze River, implying that economic development and population density were not the main contributors to the discovered pollution. The total concentration of pharmaceuticals and pesticides in Qinhuai River increased gradually with the direction of water flow, demonstrating the success of water diversion project in flushing and scouring pollutants.

A SERS Responsive DGT Sensing Device for On-Site Determination of Organic Contaminants Underwater

Although diffusion gradient in the thin-film technique (DGT) is highly regarded in environmental analysis, the traditional DGT devices cannot serve as sensing devices but in situ sampling devices. Here we report a surface enhanced Raman scattering (SERS) responsive DGT sensing device (SERS-DGT Sensor) capable of on-site determination of organic contaminants underwater. This is achieved by innovatively utilizing a SERS responsive liquid suspension of Au nanoparticles supported on graphene oxide (AuNPs@GO) as the DGT binding phase. Liquid suspension is synthesized via a combined secondary growth and molecular welding approach and used as DGT binding phase AuNPs@GO exhibit good SERS activity, aqueous stability, and adsorption performance. Based on the development time range of 24-144 h, the measurement of sulfadiazine (SMT) by SERS-DGT Sensor is evaluated in the concentration range of 0.3289-2631 ng mL-1. The SERS-DGT sampler is valid for measuring SMT under a wide range of environmental conditions (i.e, pH 5-9, ionic strength 0.0001-0.05 mol L-1 NaCl, DOM concentrations 0-100 mg L-1, the values of TC: SMT ≤ 20 and MNZ: SMT ≤ 20). SERS-DGT Sensor is applied to the practical test of SMT content in pig breeding wastewater, and compared with the grab sampling method, the results confirm that this novel hyphenated technique exhibits good accuracy and precision. The platform proves to be versatile by extending the method to the monitoring of rhodamine 6G, metronidazole, fluoxetine, and enrofloxacin. In this article, SERS-DGT Sensor, a platform for directly on-site sensing of organic DGT, holds great potential for in situ sampling and on-site sensing for a wide range of organics and provides a new idea for environmental monitoring.

Determination of the Isotopic Composition of Aqueous Mercury in a Paddy Ecosystem Using Diffusive Gradients in Thin Films

Measuring the isotopic composition of Hg in natural waters is challenging due to the ultratrace level of aqueous Hg (ng L-1). At least 5 ng of Hg mass is required for Hg isotopic analysis. Given the low Hg concentration in natural waters, a large volume of water (>10 L) is typically needed. The conventional grab sampling method is time-consuming, laborious, and prone to contamination during transportation and preconcentration steps. In this study, a DGT (diffusive gradients in thin films) method based on aminopropyl and mercaptopropyl bi-functionalized SBA-15 nanoparticles was developed and extended to determine the concentration and isotopic composition of aqueous Hg for the first time. The results of laboratory analysis showed that Hg adsorption by DGT induces ∼ -0.2‰ mass-dependent fractionation (MDF) and little mass-independent fractionation (MIF). The magnitude of MDF exhibits a dependence on the diffusion-layer thickness of DGT. Since Hg-MDF can occur in a broad range of environmental processes, monitoring the δ202Hg of aqueous Hg using the DGT method should be performed with caution. Field results show consistent MIF signatures (Δ199Hg) between the DGT and conventional grab sampling method. The developed DGT method serves as a passive sampling method that effectively characterizes the MIF of Hg in waters to understand the biogeochemical cycle of Hg at contaminated sites.

Development and application of diffusive gradients in thin films for in situ sampling of the organic UV filter 4-methylbenzylidene camphor (4-MBC) in waters

4-Methylbenzylidene camphor (4-MBC), a typical organic UV filter (OUVF) in personal care products, is considered to be a potential endocrine disruptor due to its estrogenic activity and bioaccumulation. Although 4-MBC residues have been extensively identified in aquatic waters, little is known about their occurrence, levels, and potential risk in coastal waters. This study developed a reliable sampling approach, based on diffusive gradients in thin films (DGT) with XAD-2 as the binding agent, for monitoring 4-MBC in coastal waters. The diffusion coefficients of 4-MBC in freshwater and artificial seawater were 3.65 × 10-6 cm2/s and 3.83 × 10-6 cm2/s, respectively. XAD-2 binding gel showed rapid adsorption to 4-MBC. The accumulated masses of 4-MBC in XAD-2 DGT increased linearly with deployed time for 7 days in freshwater and seawater, which agreed well with theoretical predictions. The sampling performance was independent of ionic strength (0.0001-0.5 M), pH (4.0-8.5), and dissolved organic matter (0-20 mg/L). Field deployment in the river estuary and bathing beach showed that DGT-measured 4-MBC concentrations were consistent in comparison with grab sampling. Environmental risk assessment showed that 4-MBC may pose a medium risk to aquatic organisms based on computed risk quotient (RQ) values. Sewage discharge is the main source of 4-MBC risk, while the residue in recreation beaches contributes more significantly in summer. The established DGT sampling is suitable for seasonal monitoring, source identification, and risk assessment of 4-MBC in coastal waters.

DGT method for the in situ measurement of triazines and the desorption kinetics of atrazine in soil

Triazines are frequently detected in nature water and agricultural soils worldwide. They are considered harmful to plants, animals, and the human health. In this study, diffusive gradients in thin films (DGT) method was developed for the assessment of several triazines. DGT device was used for the in situ measurement of atrazine in a pesticide factory and obtained reliable data. The atrazine concentrations measured by DGT, and solvent extraction method was in a constant ratio. The DIFS model was coupled with DGT technique to study the desorption kinetics of atrazine in four kinds of different soils. The yellow-brown soil was more inclined to adsorb atrazine than other three soils. 2_D DIFS model was used to obtain the partition coefficient for labile atrazine (K_dl), the values of the response time (T_c), and desorption/adsorption rates (k₁ and k_-1). The yellow-brown soil has a larger labile pool size, and a faster resupply speed of atrazine. The 1_D DIFS model was used to simulate the profiles of atrazine concentrations in soil solution and solid phase. The results show that the desorption of atrazine in soil was limited by kinetic limitation at short time, and was limited by the solid phase reservoir at long time.

Identification of high-concern organic pollutants in tap waters from the Yangtze River in China based on combined screening strategies

Recently, numerous organic pollutants have been detected in water environment. The safety of our drinking water has attracted widespread attention. Effective methods to screen and identify high-concern substances are urgently needed. In this study, the combined workflow for the detection and identification of high-concern organic chemicals was established and applied to tap water samples from the Yangtze River Basin. The solid phase extraction (SPE) sorbents were compared and evaluated and finally the HLB cartridge was selected as the best one for most of the contaminants. Based on target, suspect and non-target analysis, 3023 chemicals/peaks were detected. Thirteen substances such as diundecyl phthalate (DUP), 2-hydroxyatrazine, dioxoaminopyrine and diethyl-2-phenylacetamide were detected in drinking water in the Yangtze River Basin for the very first time. Based on three kinds of prioritization principles, 49 ubiquitous, 103 characteristic chemicals and 13 inefficiently removed chemicals were selected as high-concern substances. Among them, 8, 31, 9, 3, 4 substances overlapped with the toxic, risky or high-concern chemicals lists in China, America, European Union, Japan, Korea, respectively. Specific management and removal strategies were further recommended. The workflow is efficient for identification of key pollutants.

Evaluation and Application of a Novel Diffusive Gradients in Thin-Films Technique for In Situ Monitoring of Glucocorticoids in Natural Waters

The potential environmental risks of glucocorticoids (GCs) have attracted attention in the past few decades. In this study, a novel diffusive gradients in thin-films (DGT) device and analytical technique based on the second generation of polar enhanced phase (PEP-2), PEP-2-DGT, were developed for sampling and quantifying natural and synthetic GCs in aquatic systems. The capacity of PEP-2 gels for accumulating all target compounds was >600 μg per disc, sufficient for long-term passive sampling of selected GCs, even in wastewaters. Systematic tests were carried out to verify the application of DGT in natural waters and wastewaters. The performance of PEP-2-DGT devices was independent (C_DGT/C_soln was in the acceptable range of 0.9-1.1) of a wide range of environmental conditions: ionic strength (0.001-0.5 mol L^-1), dissolved organic matter (0-20 mg L^-1), and pH (3.06-9.02). It was tested for various diffusive layer thicknesses (0.565-2.065 mm) and different deployment times (10-168 h). Diffusion coefficients (D) of selected GCs through an agarose-based diffusive gel were determined for the first time (3.80-4.85 × 10^-6 cm^-2 s ^-1 at 25 °C). Linear correlations between D and log K_ow were established for three groups of target GCs (R² = 0.96-0.99). This could enable prediction of D values for other GCs with similar structures in the future, which will help for rapid screening and emergency monitoring. Concentrations and distribution patterns of analytes obtained by PEP-2-DGT devices in five rivers after 7- and 14-day deployments were in accordance with those measured from grab samples, with total GC concentrations ranging from 7 to 27 ng L^-1 at all sampling sites, confirming the reliability and robustness of the DGT devices for monitoring GCs in natural waters. The development of the new DGT technique will help improve understanding of the behavior and fate of these compounds in the aquatic environments.

Development of diffusive gradients in thin film technique for seasonal monitoring of benzophenone-type UV filters in coastal waters

Benzophenone(BP)-type UV filters are continuously released into various aquatic environments via the effluent discharge of wastewater treatment plants (WWTPs) and recreational activities in coastal beaches. In this study, we developed a robust and reliable sampling approach, diffusive gradients in thin-films (DGT), for seasonal monitoring of six BP derivatives in coastal waters to investigate their occurrence and environmental risk. The binding capacities of both XAD-2 and HLB gels for test BPs were over 252 μg with no significant deterioration in marine environment, suggesting that theoretically, DGT is capable of sampling for at least 3 months effectively. The diffusion coefficients of BPs in freshwater and seawater were determined for the first time. The sampling performance showed no dependence on environmental conditions including pH (4.0-8.5), ionic strength (0.0001-0.5 M) and dissolved organic matter (0-20 mg L^-1). The developed DGT samplers were successfully applied in a river estuary linked to a WWTP and a bathing beach at different periods of one year. Results showed that the concentrations of BPs in the coastal waters were dependent on seasonal variation. The highest level in summer and the ecological risk should be considered based on the risk quotient values. These results demonstrated that the present DGT method is suitable for measuring, characterization, and risk assessment of BPs in freshwater and marine environment.

Desorption kinetics of antipsychotic drugs from sandy sediments by diffusive gradients in thin-films technique

Dynamic processes of organic contaminants in sediments can have important toxicological implications in aquatic systems. The current study used diffusive gradients in thin-films (DGT) devices in sandy sediments spiked with nine antipsychotics and in field sandy sediments. Samplers were deployed for 1 to 30 days to determine the flux of these compounds to DGT devices and the exchange rates between the porewater and sediment solid phase. The results showed a continuous removal of antipsychotics to a binding gel and induced a mobile flux from the DGT device to the adjacent sediment solution. A dynamic model, DGT-induced fluxes in soils and sediments, was used to derive rate constants of resupply of antipsychotics from solid phase to aqueous phase (response time, T_c) and distribution coefficients for labile antipsychotics. The largest labile pool was found for lamotrigine and carbamazepine in spiked sediments. Carbamazepine, clozapine, citalopram, and lamotrigine were resupplied rapidly by sediments with T_c (25-30 min). T_c values of bupropion and amitriptyline were the longest (≈5 h), which exhibited slow desorption rates in sediments. In field sediments, high resupply was found for carbamazepine and lamotrigine, which did not show higher labile pool. The T_c values were obviously higher in the filed sediments (52-171 h). Although the adsorption process is dominant for most studied antipsychotics in both spiked sediments and field sediments, the kinetic resupply of antipsychotic compounds may not be accurately estimated by laboratory-controlled incubation experiments. More studies are needed to explore the mechanisms of desorption kinetics by using in situ DGT technique in the field.

A novel passive sampling and sequential extraction approach to investigate desorption kinetics of emerging organic contaminants at the sediment-water interface

Forms of organic contaminants is an important driver of bioavailable fraction and desorption kinetics of pollutants binding to sediments. To determine fluxes and resupply of nine environmentally-relevant antipsychotic drugs, which are emerging pollutants that can have adverse effects on aquatic organisms, interface passive samplers of diffusive gradients in thin films (DGT) were deployed for 21 days, in situ at the sediment-water interface in submerged sandy riverbank sediments. At each deployment time, samples of sediment were collected and subjected to consecutive extraction of pore water, as well as rapidly-desorbing (labile), stable-desorbing, and bound residue fractions. Concentrations of antipsychotic drugs decreased with sediment depth with the greatest concentrations observed in the top 2 cm. Positive fluxes of antipsychotic drugs were observed from sediment to surface water. The dynamic fraction transfer model indicated that the labile fraction can be resupplied with a lag time (> 21 d). When results were further interpreted using the DGT-induced fluxes in soils and sediments (DIFS) model, partial resupply of antipsychotic drugs from sediment particles to porewater was demonstrated. Desorption occurred within the entirety of the observed 15 cm depth of sediment. Fastest rates of resupply were found for carbamazepine and lamotrigine. Size of the labile pool estimated by the DIFS model did not fully explain the observed resupply, while a first-order three-compartment kinetic model for the fast-desorbing fraction can be used to supplement DIFS predictions with estimations of labile pool size.

Development and Applications of Novel DGT Passive Samplers for Measuring 12 Per- and Polyfluoroalkyl Substances in Natural Waters and Wastewaters

Extensive and long-term use of per- and polyfluoroalkyl substances (PFASs) has caused their widespread distribution in aquatic systems. A new diffusive gradients in thin-films (DGT) passive sampling method based on weak anion exchanger (WAX) binding layer is developed here for monitoring five perfluoroalkyl carboxylic acids (PFCAs), five perfluoroalkanesulfonic acids (PFSAs) and two PFASs (6:2 FTSA and GenX) in waters. Performance of WAX-DGTs was independent of environmental conditions, namely pH (3.03-8.96), ionic strength (1-500 mM), and DOM content (4-30 mg L^-1). Diffusion coefficients (D) of the 12 PFASs in the diffusive gels were measured, 9 for the first time. Linear correlations between D and perfluoroalkyl chain lengths (CF₂) were established to obtain D for congener chemicals with the similar functional group and structure. The binding capacity of the WAX-DGT sampler was at least 440 μg PFASs per sampler, sufficient for applications in waters across a wide range of conditions and PFASs concentrations. Successful applications of WAX based DGT samplers in a wastewater treatment plant (WWTP) and three rivers has demonstrated that DGT is a powerful tool for monitoring, surveillance and research of these 12 PFASs in aquatic systems, and can be extended to wider suites of PFs in future.

Persistent Organic Pollutants (POPs) and Related Chemicals in the Global Environment: Some Personal Reflections

Persistent organic pollutants (POPs) and related chemicals are fascinating because of their combination of physical-chemical properties and complex effects. Most are man-made, but some also have natural origins. They are persistent in the environment, but they can be broken down variously by biodegradation, atmospheric reactions, and abiotic transformations. They can exist in the gas or particle phases, or both, in the atmosphere and in the dissolved or particulate phases, or both, in water. These combinations mean that they may undergo long-range transport in the atmosphere or oceans, or they may stay close to sources. Hence, emissions from one country are frequently a source of contamination to another country. They are also usually lipophilic, so-combined with persistence-this means they can accumulate in organisms and biomagnify through food chains. We all have a baseline of POPs residues in our tissues, even the unborn fetus via placental transfer and the newly born baby via mother's milk. POPs in biological systems occur in mixtures, so confirming effects caused by POPs on humans and other top predators is never straightforward. Depending on which papers you read, POPs may be relatively benign, or they could be responsible for key subchronic and chronic effects on reproductive potential, on immune response, as carcinogens, and on a range of behavioral and cognitive end points. They could be a factor behind diseases and conditions which have been increasingly reported and studied in modern societies. In short, they are endlessly fascinating to scientists and a nightmare to regulators and policy makers.

Use of the Dynamic Technique DGT to Determine the Labile Pool Size and Kinetic Resupply of Pesticides in Soils and Sediments

The diffusive gradients in thin films (DGT) technique has been successfully and widely applied to investigate the labile fractions of inorganic contaminants in soils and sediments, but there have been almost no applications to organic contaminants. Here we developed and tested the approach for the pesticide Atrazine (ATR) in a controlled soil experiment and in situ in an intact lake sediment core. The soil study explored the relationships between soil solution, DGT measured labile ATR and solvent extractable ATR in dosed soils of different organic matter, pH status and incubation times. The results are further interpreted using the DIFS (DGT-induced fluxes in soils and sediments) model. Resupply of ATR to the soil solution was partially sustained by the solid phase in all the soils. This was due to small labile pool size and slow kinetics, with soil pH being an important controlling factor. The in situ sediment study successfully used a DGT probe to examine labile ATR distribution through the core on the subcm scale. It demonstrated-for the first time-an easy to use in situ technique to investigate the effects of redox on resupply kinetics and biogeochemical processes of trace organic contaminants in sediments.

Field evaluation of diffusive gradients in thin-film passive samplers for wastewater-based epidemiology

There is a need for a simple water sampling technique to enable routine monitoring of community drug consumption through wastewater-based epidemiology (WBE). This study investigates the potential use of diffusive gradients in thin films to sample organic compounds (o-DGT) for WBE. Three types of resin gels (HLB, XAD 18, and XDA-1) within o-DGT samplers each were deployed in triplicate at the inlets of two sewage treatment plants of Southern Asian cities. The target compounds included 15 illicit drugs and 18 antibiotics. A comprehensive evaluation was undertaken regarding each resin's ability to accumulate the target compounds and accuracy by comparing active samples. The organic compounds accumulated on each resin gel were characterised at the molecular level using Fourier transform ion-cyclotron-resonance mass spectrometry (FT-ICR MS). The results showed that the HLB resin performed better than the XAD 18 and XDA-1 resins. Based on calculations using the HLB-DGT data, methamphetamine and heroin were the two most popular illicit drugs consumed among the studied populations, and were followed by ketamine and codeine, which agreed well with the authoritative reports and reference data. The total drug consumption in Hanoi was one order of magnitude higher than that in Guangzhou, thus implying a probably more serious drug situation in the former. Overall, the findings of this study demonstrate that o-DGT passive samplers are a promising tool for WBE studies, particularly at WWTPs or in urban streams where an automatic sampler for taking composite water samples is absent.

Limitations of Integrative Passive Samplers as a Tool for the Quantification of Pharmaceuticals in the Environment - A Critical Review with the Latest Innovations

This review starts with a presentation of the theory of kinetic uptake by passive sampling (PS), which is traditionally used to distinguish between integrative and equilibrium samplers. Demonstrated limitations of this model for the passive sampling of pharmaceuticals from water were presented. Most notably, the contribution of the protective membrane in the resistance to mass transfer of lipophilic analytes and the well documented effect of external parameters on sampling rates contributed to the greatest uncertainty in PS application. The diffusion gradient in thin layer (DGT) technique seems to reduce the effect of external parameters (e.g., flow rate) to some degree. The laboratory-determined integrative uptake periods over defined sampler deployments was compared, and the discrepancy found suggests that the most popular Polar Organic Chemical Integrative Sampler (POCIS) could in some cases utilized as an equilibrium sampler. This assertion is supported by own calculations for three pharmaceuticals with extremely different lipophilic characters. Finally, the reasons performance reference compounds (PRCs) are not recommended for the reduction in uncertainty of the TWAC found by adsorptive samplers were presented. It was concluded that techniques of passive sampling of pharmaceuticals need a new uptake model to fit the current situation.

In situ measurement of synthetic musks in wastewaters using diffusive gradients in thin film technique

Synthetic musks (SMs) are used extensively in household and personal care products and have acted significant concerns due to their environmental impacts and potential health effects. Here, we present a passive sampling approach based on diffusive gradients in thin films (DGT) for in situ measurement of SMs in urban wastewaters. XAD-2 binding gel, which has a rapid binding rate and high elution efficiency, was used in DGT device for the accumulation of six polycyclic musks and three nitro musks. The diffusion coefficients (D and D_NL) of the SMs through agarose gel without and with a nylon filter membrane were 3.37-4.49 and 1.48-4.41 ×10^-6cm² s^-1. The filter membrane caused an ~3 h lag phase and slowed the diffusion rates of the SMs through the diffusive phase. Solution pH (4.30-8.92), ionic strength (0.0001-0.5 M) and dissolved organic matter (0-20 mg L^-1) showed no obvious influence on uptake of the SMs in DGT. The measured average SM concentrations in the effluent of wastewater treatment plants ranged from 0.45-696 ng/L for DGT deployment, without obvious membrane biofouling, and they were comparable to the concentrations determined by grab sampling. These results confirmed that the present method is reliable and convenient for in situ measurement of semivolatile hydrophobic SMs in complicated waters and is an available tool to investigate the environmental behaviors of SMs in the environment.