1
|
Zhang KH, Bao LJ, Wang Y, Yang HM, Gao Y, Tang C, Wu CC, Zeng EY. Effects of polymer matrix and temperature on pyrolysis of tetrabromobisphenol A: Product profiles and transformation pathways. JOURNAL OF HAZARDOUS MATERIALS 2024; 474:134806. [PMID: 38850946 DOI: 10.1016/j.jhazmat.2024.134806] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2024] [Revised: 05/27/2024] [Accepted: 06/02/2024] [Indexed: 06/10/2024]
Abstract
Plastics are crucial constituents in electronic waste (e-waste) and part of the issue in e-waste recycling and environmental protection. However, previous studies have mostly focused on plastic recovery or thermal behavior of flame retardants, but not both simultaneously. The present study simulated the process of e-waste thermal treatment to explore tetrabromobisphenol A (TBBPA) pyrolysis at various temperatures using polystyrene (PS), polyvinyl chloride (PVC), and e-waste plastics as polymer matrices. Pyrolysis of TBBPA produced bromophenol, bromoacetophenone, bromobenzaldehyde, and bromobisphenol A. Co-pyrolysis with the polymer matrices increased emission factors by 1 - 2 orders of magnitude. The pyrolytic products of TBBPA, TBBPA+PS, and TBBPA+PVC were mainly low-brominated bisphenol A, while that of TBBPA in e-waste plastics was consistently bromophenol. Increasing temperature drove up the proportions of gaseous and particulate products, but lowered the relative abundances of inner wall adsorbed and residual products in pyrolysis of pure TBBPA. In co-pyrolysis of TBBPA with polymer matrix, the proportions of products in different phases were no longer governed solely by temperature, but also by polymer matrix. Co-pyrolysis of TBBPA with PS generated various bromophenols, while that with PVC produced chlorophenols and chlorobrominated bisphenol A. Transformation pathways, deduced by ab initio calculations, include hydrogenation-debromination, isopropylphenyl bond cleavage, oxidation, and chlorination.
Collapse
Affiliation(s)
- Kai-Hui Zhang
- Guangdong Key Laboratory of Environmental Pollution and Health, Jinan University, Guangzhou 511443, China
| | - Lian-Jun Bao
- Guangdong Key Laboratory of Environmental Pollution and Health, Jinan University, Guangzhou 511443, China; Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), School of Environment and Energy, South China University of Technology, Guangzhou 510006, China
| | - Yu Wang
- Guangdong Key Laboratory of Environmental Pollution and Health, Jinan University, Guangzhou 511443, China
| | - Han-Ming Yang
- Guangdong Key Laboratory of Environmental Pollution and Health, Jinan University, Guangzhou 511443, China
| | - Yanpeng Gao
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, China
| | - Caiming Tang
- Laboratory of Advanced Analytical Chemistry and Detection Technology, Research Center for Eco-Environmental Engineering, Dongguan University of Technology, Dongguan 523808, China
| | - Chen-Chou Wu
- Guangdong Key Laboratory of Environmental Pollution and Health, Jinan University, Guangzhou 511443, China; Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), School of Environment and Energy, South China University of Technology, Guangzhou 510006, China
| | - Eddy Y Zeng
- Key Laboratory of Pollution Control and Ecosystem Restoration in Industry Clusters (Ministry of Education), School of Environment and Energy, South China University of Technology, Guangzhou 510006, China.
| |
Collapse
|
2
|
Fu M, Qiao Z, Zhou S, Han Y, Ling S, Peng C, Zhang W, Wu J. Five coexisting brominated flame retardants in a water-sediment-Vallisneria system: Bioaccumulation and effects on oxidative stress and photosynthesis. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 933:173230. [PMID: 38750745 DOI: 10.1016/j.scitotenv.2024.173230] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/04/2023] [Revised: 04/18/2024] [Accepted: 05/12/2024] [Indexed: 05/20/2024]
Abstract
The pollution of various brominated flame retardants (BFRs) is concurrence, while their environmental fate and toxicology in water-sediment-submerged plant systems remain unclear. In this study, Vallisneria natans plants were co-exposed to 2,3,4,5,6-pentabromotoluene (PBT), hexabromobenzene (HBB), 1,2-bis (2,4,6-tribromophenoxy) ethane (BTBPE), decabromodiphenyl ether (BDE209), and decabromodiphenyl ethane (DBDPE). The ∑BFRs concentration in the root was 2.15 times higher than that in the shoot. Vallisneria natans accumulated more BTBPE and HBB in 0.2, 1, and 5 mg/kg treatments, while they accumulated more DBDPE and BDE209 in 25 and 50 mg/kg treatments. The bioaccumulation factors in the shoot and root were 1.08-96.95 and 0.04-0.70, respectively. BFRs in sediments had a more pronounced effect on bioaccumulation levels than BFRs in water, and biotranslocation was another potential influence factor. The SOD activity, POD activity, and MDA content were significantly increased under co-exposure. The DBDPE separate exposure impacted the metabolism of substances and energy, inhibited mismatch repair, and disrupted ribosomal functions in Vallisneria natans. However, DBDPE enhanced their photosynthesis by upregulating the expression level of genes related to the light reaction. This study provides a broader understanding of the bioaccumulation and toxicity of BFRs in submerged plants, shedding light on the scientific management of products containing BFRs.
Collapse
Affiliation(s)
- Mengru Fu
- State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, School of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Zhihua Qiao
- State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, School of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Shanqi Zhou
- State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, School of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Yanna Han
- State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, School of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Siyuan Ling
- Shanghai Academy of Environmental Sciences, Shanghai 200233, China
| | - Cheng Peng
- State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, School of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Wei Zhang
- State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, School of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China.
| | - Jinhong Wu
- Shanghai Yaxin Urban Construction Co., Ltd., Shanghai 200436, China.
| |
Collapse
|
3
|
Chen TL, Chen YS, Chiang PC, Chen YH, Hsu CH. NOx removal and copper recovery from the leaching process for waste printed circuit boards: performance evaluation and potential environmental impact assessment. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:9935-9947. [PMID: 37004617 DOI: 10.1007/s11356-023-26223-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Accepted: 02/25/2023] [Indexed: 06/19/2023]
Abstract
Resource recovery is crucial for small- and medium-sized enterprises to attain a circular economy. The economic benefits of recovering precious metals from electronic waste, such as waste printed circuit boards (WPCBs), are hindered by secondary pollutant emissions from pretreatment processes. This study aims to recover copper from the WPCB acid leaching process and reduce NOx emissions through the use of a high gravity rotating packed bed (RPB). The results indicate that the copper recovery ratio increases to 99.75% through the displacement reaction between iron powder and copper nitrate. The kinetic analysis of copper dissolution was employed to simulate the NOx emissions during acid leaching, with an R-squared value of 0.872. Three oxidants, including H2O2(aq), ClO2(aq), and O3(g), with pH adjusted to different NaOH concentrations, were used to remove NOx. The greatest NOx removal rate was achieved using a 0.06 M NaOH solution, with a removal rate of 91.2% for ozone oxidation at a 152-fold gravity level and a gas-to-liquid (G/L) ratio of 0.83. The gas-side mass transfer coefficients (KGa) for NOx range from 0.003 to 0.012 1/s and are comparable to previous studies. The results of a life cycle analysis indicate that the NOx removal rate, nitric acid recycling rate, and copper recovery rate are 85%, 80%, and 100%, respectively, reducing the environmental impact on the ecosystem, human health, and resource depletion by 10% compared to a scenario with no NOx removal.
Collapse
Affiliation(s)
- Tse-Lun Chen
- Graduate Institute of Environmental Engineering, National Taiwan University, 10673, Taipei, Taiwan.
- Institute of Environmental Engineering, ETH Zürich, 8093, Zurich, Switzerland.
| | - Yen-Syun Chen
- Graduate Institute of Environmental Engineering, National Taiwan University, 10673, Taipei, Taiwan
| | - Pen-Chi Chiang
- Graduate Institute of Environmental Engineering, National Taiwan University, 10673, Taipei, Taiwan.
| | - Yi-Hung Chen
- Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, 10608, Taipei, Taiwan
| | | |
Collapse
|
4
|
Tang C, Liu L, Zheng R, Zhu Y, Tang C, Zeng YH, Luo XJ, Mai BX. Comprehensive characterization and prioritization of halogenated organic compounds in fish and their implications for exposure. ENVIRONMENT INTERNATIONAL 2024; 184:108476. [PMID: 38346376 DOI: 10.1016/j.envint.2024.108476] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/30/2023] [Revised: 01/02/2024] [Accepted: 02/01/2024] [Indexed: 02/23/2024]
Abstract
Fish are an important pollution indicator for biomonitoring of halogenated organic compounds (HOCs) in aquatic environments, and HOCs in fish may pose health threats to consumers. This study performed nontarget and comprehensive analyses of HOCs in fish from an e-waste recycling zone by gas chromatography-high-resolution mass spectrometry, and further prioritized their human exposure risks. A total of 1652 formulas of HOCs were found in the fish, of which 1222, 117, and 313 were organochlorines, organobromines, and organochlorine-bromines, respectively. The total concentrations of HOCs were 15.4-18.7 μg/g (wet weight), and organobromines were the predominant (14.1-16.8 μg/g). Of the HOCs, 41 % were elucidated with tentative structures and divided into 13 groups. The estimated total daily exposures of HOCs via dietary consumption of the fish for local adult residents were 3082-3744 ng/kg bw/day. The total exposures were dominated by several groups of HOCs with the following contribution order: polyhalogenated biphenyls and their derivatives > polyhalogenated diphenyl ethers > halo- (H-)alkanes/olefines > H-benzenes > H-dioxins > H-polycyclic aromatic hydrocarbons > H-phenols. The comprehensive characterization and prioritization results provide an overview of the species and distributions of HOCs in edible fish, and propose an inventory of crucial HOCs associated with high exposure risks.
Collapse
Affiliation(s)
- Caiming Tang
- Laboratory of Advanced Analytical Chemistry and Detection Technology, Research Center for Eco-Environmental Engineering, Dongguan University of Technology, Dongguan 523808, China; Guangdong Provincial Key Laboratory of Environmental Protection and Resources Utilization, State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Ling Liu
- Laboratory of Advanced Analytical Chemistry and Detection Technology, Research Center for Eco-Environmental Engineering, Dongguan University of Technology, Dongguan 523808, China
| | - Ruifen Zheng
- Laboratory of Advanced Analytical Chemistry and Detection Technology, Research Center for Eco-Environmental Engineering, Dongguan University of Technology, Dongguan 523808, China
| | - Yizhe Zhu
- Laboratory of Advanced Analytical Chemistry and Detection Technology, Research Center for Eco-Environmental Engineering, Dongguan University of Technology, Dongguan 523808, China
| | - Caixing Tang
- The Third Affiliated Hospital of Sun Yat-sen University, Lingnan Hospital, Guangzhou 510630, China
| | - Yan-Hong Zeng
- Guangdong Provincial Key Laboratory of Environmental Protection and Resources Utilization, State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, China.
| | - Xiao-Jun Luo
- Guangdong Provincial Key Laboratory of Environmental Protection and Resources Utilization, State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Bi-Xian Mai
- Guangdong Provincial Key Laboratory of Environmental Protection and Resources Utilization, State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, China
| |
Collapse
|
5
|
Li C, Xia H, Liu C, Zeng K, Zhang L. Analysis of the effect of heating rate on pyrolysis kinetics and product composition of copper-containing waste circuit boards. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:33075-33089. [PMID: 36471150 DOI: 10.1007/s11356-022-24524-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/06/2022] [Accepted: 11/28/2022] [Indexed: 06/17/2023]
Abstract
Pyrolysis is a cost-effective and environmentally benign method for recycling organic waste, which can be converted into high-energy gases and oils. Pyrolysis technology was employed in this study to recycle copper-containing discarded circuit board material and recover copper, glass fibers, and gases and oils with high calorific values. Thermogravimetric analyses (TGA), Fourier transform infrared spectroscopy (FTIR), and gas chromatography-mass spectrometry (GC-MS) were used to evaluate pyrolyses of copper-containing waste circuit board materials conducted at different heating rates (5, 10, 20, and 40 °C/min), and the resulting volatiles were studied in detail. The effects of heating rate on the kinetics and activation energies for pyrolyses of copper-containing waste circuit boards were also investigated by using the Coats-Redfern (C-R) method. The TGA curves and FTIR spectra did not differ significantly for different heating rates, and the main functional groups identified with the FTIR results were O-H, C = C, aromatic benzene, substituted benzene, and C-Br. Additionally, GC-MS analyses showed that the heating rate had a great influence on the pyrolysis products formed; the phenol content decreased with increasing heating rate, and the highest content was realized at 5 ℃/min. Energy dispersive spectroscopy (EDS) analyses showed that bromine was removed from the solid phase products during pyrolysis, while copper was effectively enriched in the feedstock. This indicated that pyrolysis can be used to recover copper-containing waste circuit boards.
Collapse
Affiliation(s)
- Chunyu Li
- Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
- Yunnan Provincial Key Laboratory of Intensification Metallurgy, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
- Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming, 650093, Yunnan, China
- State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
| | - Hongying Xia
- Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China.
- Yunnan Provincial Key Laboratory of Intensification Metallurgy, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China.
- Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming, 650093, Yunnan, China.
- State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China.
| | - Chengfei Liu
- Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
- Yunnan Copper Co., Ltd, Kunming, 650000, China
| | - Kangqing Zeng
- Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
- Yunnan Provincial Key Laboratory of Intensification Metallurgy, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
- Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming, 650093, Yunnan, China
- State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
| | - Libo Zhang
- Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
- Yunnan Provincial Key Laboratory of Intensification Metallurgy, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
- Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming, 650093, Yunnan, China
- State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming, 650093, Yunnan, China
| |
Collapse
|
6
|
Ge X, Gao Y, Yang Y, Chen G, Ma S, Hu B, Yu Y, An T. Mixed bromine/chlorine transformation products of tetrabromobisphenol A formed in the combustion of printed circuit boards: Emission characteristics and transformation pathways. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 859:160104. [PMID: 36372166 DOI: 10.1016/j.scitotenv.2022.160104] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/17/2022] [Revised: 11/06/2022] [Accepted: 11/06/2022] [Indexed: 06/16/2023]
Abstract
Recently, mixed bromine/chlorine transformation products of tetrabromobisphenol A (ClyBrxBPAs) were found to be possibly related to the thermal treatment processes of electronic wastes. To explore their emission characteristics and formation mechanism, printed circuit board scraps were combusted in a tube furnace, under the temperature from 25 °C to 600 °C. The emission factor of the debromination products of tetrabromobisphenol A (BrxBPAs) was the highest, whereas that of ClyBrxBPAs was the lowest. Among three phases, most of the target compounds were partitioned into the oil and particle phases, and only negligible gaseous 2-BrBPA and bisphenol A were detected. The emission rates of most compounds were fastest at 300 °C, although 2-BrBPA, 2,6-Br2BPA, and 2-Cl-6-BrBPA peaked at 350 °C. Among the chemicals in total emission, 2-BrBPA was the dominant congener in BrxBPAs, whereas 2-Cl-2',6,6'-Br3BPA, 2-Cl-2',6#-Br2BPA, and Σ2Cl1Br1BPAs shared similar proportions in ClyBrxBPAs. Meanwhile, the composition profiles at 300 °C showed that 2,2',6-Br3BPA and 2-Cl-2',6,6'-Br3BPA occupied the largest proportions in BrxBPAs and ClyBrxBPAs, respectively. To reveal the possible transformation pathways, the Gibbs free energy was calculated based on a radical substitution reaction. After "•Br" removal from tetrabromobisphenol A or other BrxBPAs, the intermediate was more easily combined with "•H" than with "•Cl." In addition, the ClyBrxBPA formation via "-•H + •Cl" by BrxBPAs is nonspontaneous, thus limiting the further generation of ClyBrxBPAs. This study not only provides ideas for the study of other mixed halogenated products, but also provides constructive suggestions for environmental source analysis by combining previous research on the occurrence of ClyBrxBPAs in various environmental matrices.
Collapse
Affiliation(s)
- Xiang Ge
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Key Laboratory of City Cluster Environmental Safety and Green Development, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Yanpeng Gao
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Key Laboratory of City Cluster Environmental Safety and Green Development, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Yan Yang
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Key Laboratory of City Cluster Environmental Safety and Green Development, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China.
| | - Guanhui Chen
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Key Laboratory of City Cluster Environmental Safety and Green Development, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Shengtao Ma
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Key Laboratory of City Cluster Environmental Safety and Green Development, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Beibei Hu
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Key Laboratory of City Cluster Environmental Safety and Green Development, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Yingxin Yu
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Key Laboratory of City Cluster Environmental Safety and Green Development, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Taicheng An
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Key Laboratory of City Cluster Environmental Safety and Green Development, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| |
Collapse
|
7
|
Azizi S, Dehghani MH, Naddafi K, Nabizadeh R, Yunesian M. Occurrence of organophosphorus esters in outdoor air fine particulate matter and comprehensive assessment of human exposure: A global systematic review. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 318:120895. [PMID: 36529340 DOI: 10.1016/j.envpol.2022.120895] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/17/2022] [Revised: 12/05/2022] [Accepted: 12/15/2022] [Indexed: 06/17/2023]
Abstract
Organophosphate esters (OPEs) are widely used in various industrial items, including plastics, textiles, construction materials, electronics, and auto parts. Several studies have investigated the concentration of OPE compounds in the air, where different compounds have been measured. This systematic review aims to investigate and summarize the relationship between exposure concentrations of OPEs in outdoor air and health risk for different OPE compounds, and correlations between OPE compounds in emission sources. PubMed, Scopus, Embase, Web of Science, and Google Scholar were searched from January 2000 to September 2021 to identify relevant research. The quality of the studies was assessed using the OHAT risk of bias tool. Spearman's correlation and principal component analysis (PCA) were used to analyze the results and correlation between OPE compounds. A total of 7669 manuscripts were found from the search in 5 databases. Finally, 46 studies were included in the systematic review. According to the median concentrations in the studies that were included, Tris(1-chloro-2-propyl) phosphate (TCIPP) (25%), trimethylphenyl phosphate(TMPP) (19%), Tri-iso-butyl phosphate (TiBP) (12%), Triphenyl phosphate (TPHP) (9%) and Tris(2-chloroethyl) phosphate (TCEP) (8%) had the greatest concentrations of OPEs overall. The cumulative contribution of the two main factors, F1 and F2, from the principal component analysis (PCA) results is 49.81%. The EDI value for the compounds is TCEP > TCIPP > TiBP > TMPP > 2-Ethylhexyl diphenyl phosphate (EHDPP) > TPHP > Tri(2-Ethylhexyl) phosphate (TEHP) > Tri-m-cresyl phosphate (mTCP) > Tris(1, 3-dichloro-isopropyl) phosphate (TDCPP) > Tri-n-butyl phosphate (TnBP). The total amount of non-carcinogenic risk (HQ) was for children > infants > adults. The highest value of HQ was for TCEP, TCIPP, and TMPP, respectively. The highest carcinogenic risk value was for TCEP and TMPP.
Collapse
Affiliation(s)
- Salah Azizi
- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
| | - Mohammad Hadi Dehghani
- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran; Institute for Environmental Research, Center for Solid Waste Research, Tehran University of Medical Sciences, Tehran, Iran.
| | - Kazem Naddafi
- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran; Center for Air Pollution Research (CAPR), Institute for Environmental Research (IER), Tehran University of Medical Sciences, Tehran, Iran
| | - Ramin Nabizadeh
- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran; Center for Air Pollution Research (CAPR), Institute for Environmental Research (IER), Tehran University of Medical Sciences, Tehran, Iran
| | - Masud Yunesian
- Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran; Department of Research Methodology and Data Analysis, Institute for Environmental Research, Tehran University of Medical Sciences, Tehran, Iran
| |
Collapse
|
8
|
Liu K, Wang M, Tsang DCW, Liu L, Tan Q, Li J. Facile path for copper recovery from waste printed circuit boards via mechanochemical approach. JOURNAL OF HAZARDOUS MATERIALS 2022; 440:129638. [PMID: 35933860 DOI: 10.1016/j.jhazmat.2022.129638] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/13/2022] [Revised: 07/13/2022] [Accepted: 07/17/2022] [Indexed: 06/15/2023]
Abstract
Recycling copper (Cu0) from waste printed circuit boards (PCBs) is a prevalent challenge. Here, we propose a new pathway and reveal mechanisms for recovering Cu0 from waste PCBs via a mechanochemical approach. The successful application of mechanical force avoids using inorganic acid in the Cu0 recovery process. Our work demonstrates that ferric chloride (FeCl3) was superior to ferric sulfate and ferric nitrate as a solid-phase reagent for Cu0 recovery due to chloride complexation. Under the induction of mechanical force, the Cu0 in the waste PCBs was oxidized by Fe3+ and complexed by Cl¯ to form a meta-stable cuprous chloride, which was susceptible to leaching in an acidic liquid-phase system constructed by hydrolysis of ferric salt. Further mechanism analysis reveals that in the mechanochemical solid-phase reaction, Cu0, metallic impurities, metal oxides, and carbon materials from waste PCBs could also reduce Fe3+ to Fe2+. The optimum conditions for Cu0 recovery from waste PCB powder with FeCl3 as a solid-phase reagent were: rotational speed of 500 rpm, Cu0:Fe3+ molar ratio of 1:20, and reaction time of 120 min, achieving the highest recovery of 99.6 wt%. This study presents a facile path for Cu0 recovery from waste PCBs for resource circulation.
Collapse
Affiliation(s)
- Kang Liu
- State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China; Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
| | - Mengmeng Wang
- Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
| | - Daniel C W Tsang
- Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China; Research Centre for Environmental Technology and Management, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
| | - Lili Liu
- State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Quanyin Tan
- State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Jinhui Li
- State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China.
| |
Collapse
|
9
|
Lin H, Lao JY, Wang Q, Ruan Y, He Y, Lee PKH, Leung KMY, Lam PKS. Per- and polyfluoroalkyl substances in the atmosphere of waste management infrastructures: Uncovering secondary fluorotelomer alcohols, particle size distribution, and human inhalation exposure. ENVIRONMENT INTERNATIONAL 2022; 167:107434. [PMID: 35914336 DOI: 10.1016/j.envint.2022.107434] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/22/2022] [Revised: 07/08/2022] [Accepted: 07/23/2022] [Indexed: 06/15/2023]
Abstract
Per- and polyfluoroalkyl substances (PFAS) have been applied in numerous industrial and consumer products, the majority of which flow into waste management infrastructures (WMIs) at the end of their life cycles, but little is known about atmospheric releases of PFAS from these facilities. In this study, we addressed this key issue by investigating 49 PFAS, including 23 ionic and 26 neutral and precursor PFAS, in the potential sources (n = 4; within or adjacent to WMIs) and reference sites (n = 2; coastal and natural reserve sites) in urban and rural areas of Hong Kong, China. Duplicate samples of air and size-segregated particulate matter were collected for 48 h continuously using a 11-stage Micro-Orifice Uniform Deposit Impactor (MOUDI). In general, fluorotelomer alcohols (FTOHs) and perfluoroalkane sulfonamides were the predominant PFAS classes found across sampling sites. We also demonstrated the release of several less frequently observed semivolatile intermediate products (e.g., secondary FTOHs) during waste treatment. Except for perfluorooctane sulfonate, the size-segregated distributions of particulate PFAS exhibited heterogeneity across sampling sites, particularly in the WMIs, implying combined effects of sorption affinity and emission sources. A preliminary daily air emission estimation revealed that landfill was a relatively important source of PFAS relative to the wastewater treatment plant. A simplified International Commission on Radiological Protection model was used to estimate lung depositional fluxes, and the results showed that inhaled particulate PFAS were mainly deposited in the head airway while fine and ultrafine particles carried PFAS deeper into the lung alveoli. The cumulative daily inhalation dose of gaseous and particulate PFAS ranged from 81.9 to 265 pg/kg/d. In-depth research is required to understand the health effect of airborne PFAS on workers at WMIs.
Collapse
Affiliation(s)
- Huiju Lin
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China; Department of Chemistry, City University of Hong Kong, Hong Kong SAR, China
| | - Jia-Yong Lao
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China; Department of Chemistry, City University of Hong Kong, Hong Kong SAR, China
| | - Qi Wang
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China; Department of Chemistry, City University of Hong Kong, Hong Kong SAR, China
| | - Yuefei Ruan
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China; Department of Chemistry, City University of Hong Kong, Hong Kong SAR, China; Research Centre for the Oceans and Human Health, City University of Hong Kong Shenzhen Research Institute, Shenzhen 518057, China.
| | - Yuhe He
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China; Research Centre for the Oceans and Human Health, City University of Hong Kong Shenzhen Research Institute, Shenzhen 518057, China; School of Energy and Environment, City University of Hong Kong, Hong Kong SAR, China
| | - Patrick K H Lee
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China; School of Energy and Environment, City University of Hong Kong, Hong Kong SAR, China
| | - Kenneth M Y Leung
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China; Department of Chemistry, City University of Hong Kong, Hong Kong SAR, China; Research Centre for the Oceans and Human Health, City University of Hong Kong Shenzhen Research Institute, Shenzhen 518057, China
| | - Paul K S Lam
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China; Department of Chemistry, City University of Hong Kong, Hong Kong SAR, China; Office of the President, Hong Kong Metropolitan University, Hong Kong SAR, China.
| |
Collapse
|
10
|
Zeng X, Xu C, Xu X, Huang Y, Wang Q, Huo X. Combined toxicity of air pollutants related to e-waste on inflammatory cytokines linked with neurotransmitters and pediatric behavioral problems. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2022; 239:113657. [PMID: 35617902 DOI: 10.1016/j.ecoenv.2022.113657] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/17/2021] [Revised: 03/22/2022] [Accepted: 05/12/2022] [Indexed: 02/05/2023]
Abstract
E-waste usually refers to the discarded electrical or electronic equipment that is no longer used. Informal e-waste recycling methods, such as burning, roasting, acid leaching, and shredding, had resulted in serious air pollution, which is a prominent risk factor for children's health. However, the combined toxicity of air pollutants on children's behavioral health remains unclear. This study collected data on air pollution exposure, calculated the average daily dose (ADD) based on these air pollutants for children in Guiyu (e-waste group, n = 112) and Haojiang (reference group, n = 101), then assessed children's behavioral health using the Strengths and Difficulties Questionnaire (SDQ), and further estimated the associations of ADD, inflammatory cytokines, neurotransmitters, and children's behavioral problems. Compared with Haojiang, Guiyu has poorer air quality and higher levels of ADD, inflammatory cytokines (such as IL-1β, IL-6, and TNF-α), neurotransmitters (such as DA and SP), and SDQ scores, but lower levels of serum neuropeptide Y (NPY) levels. Spearman correlation analyses indicated that there were significant relationships among inflammatory cytokines, neurotransmitters, and behavioral scores. Multiple linear regression analyses showed that each unit increase in ADD was associated with serum levels of DA and SP, the serum NPY subsequently changed by B (95% CI): 0.99 (0.14, 1.84) nmol/L, 0.25 (0.08, 0.42) ng/mL, and - 0.16 (-0.26, -0.05) ng/mL, respectively. After adjustment for confounders, logistic regression analyses suggested that with each one-fold increase in ADD was associated with the risk of emotional symptoms [OR (95% CI): 18.15 (2.72, 121.06)], hyperactivity-inattention [13.64 (2.28, 81.65)] and total difficulties [8.90 (1.60, 49.35)] and prosocial behavior [- 7.32 (-44.37, -1.21)]. Taken together, this study demonstrates that combined exposure to air pollutants may alter the levels of inflammatory cytokines and serum neurotransmitter to subsequently impact behavioral health in children.
Collapse
Affiliation(s)
- Xiang Zeng
- Laboratory of Environmental Medicine and Developmental Toxicology, Guangdong Key Laboratory of Environmental Pollution and Health, School of Environment, Jinan University, Guangzhou 510632, Guangdong, China
| | - Cheng Xu
- Laboratory of Environmental Medicine and Developmental Toxicology, and Guangdong Provincial Key Laboratory of Infectious Diseases and Molecular Immunopathology, Shantou University Medical College, Shantou 515041, Guangdong, China
| | - Xijin Xu
- Laboratory of Environmental Medicine and Developmental Toxicology, and Guangdong Provincial Key Laboratory of Infectious Diseases and Molecular Immunopathology, Shantou University Medical College, Shantou 515041, Guangdong, China; Department of Cell Biology and Genetics, Shantou University Medical College, Shantou 515041, Guangdong, China
| | - Yu Huang
- Laboratory of Environmental Medicine and Developmental Toxicology, and Guangdong Provincial Key Laboratory of Infectious Diseases and Molecular Immunopathology, Shantou University Medical College, Shantou 515041, Guangdong, China
| | - Qihua Wang
- Laboratory of Environmental Medicine and Developmental Toxicology, Guangdong Key Laboratory of Environmental Pollution and Health, School of Environment, Jinan University, Guangzhou 510632, Guangdong, China
| | - Xia Huo
- Laboratory of Environmental Medicine and Developmental Toxicology, Guangdong Key Laboratory of Environmental Pollution and Health, School of Environment, Jinan University, Guangzhou 510632, Guangdong, China
| |
Collapse
|
11
|
Ge X, Ma S, Huo Y, Yang Y, Luo X, Yu Y, An T. Mixed bromine/chlorine transformation products of tetrabromobisphenol A: Potential specific molecular markers in e-waste dismantling areas. JOURNAL OF HAZARDOUS MATERIALS 2022; 423:127126. [PMID: 34523476 DOI: 10.1016/j.jhazmat.2021.127126] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/06/2021] [Revised: 09/01/2021] [Accepted: 09/01/2021] [Indexed: 06/13/2023]
Abstract
Mixed bromine/chlorine transformation products (ClyBrxBPAs) of tetrabromobisphenol A (TBBPA) were recently identified for the first time in an electronic waste (e-waste) dismantling site. To determine whether these compounds can be used as specific molecular markers of e-waste dismantling activities, the environmental occurrences and distributions of TBBPA and its transformation products including debromination products (BrxBPAs) and ClyBrxBPAs were analyzed in soil samples from three sites in China: Guiyu (an e-waste site), Qingyuan (a former e-waste site now mainly used for old wire and cable recycling), and Shouguang (a flame retardant production base). Levels of the target analytes in Guiyu were significantly higher than in Qingyuan and Shouguang. BrxBPAs and ClyBrxBPAs were widely detected in Guiyu at concentrations between 1 and 4 orders of magnitude lower than their parent compound TBBPA. The highest concentration was found in an e-waste dismantling park, with lower concentrations in surrounding area. The levels of ClyBrxBPAs in Qingyuan were much lower, indicating that the ClyBrxBPAs may come from the processing of wires and cables, but not rule out the incubation on their own in soils. None of ClyBrxBPAs were detected in Shouguang. ClyBrxBPAs may thus be useful as specific molecular markers for determining the intensity of e-waste dismantling activities.
Collapse
Affiliation(s)
- Xiang Ge
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Key Laboratory for City Cluster Environmental Safety and Green Development of the Ministry of Education, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Shengtao Ma
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Key Laboratory for City Cluster Environmental Safety and Green Development of the Ministry of Education, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China; Synergy Innovation Institute of GDUT, Shantou 515041, PR China
| | - Yanping Huo
- School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, PR China
| | - Yan Yang
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Key Laboratory for City Cluster Environmental Safety and Green Development of the Ministry of Education, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China; Synergy Innovation Institute of GDUT, Shantou 515041, PR China
| | - Xiaojun Luo
- State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, PR China; Guangdong-Hong Kong-Macao Joint Laboratory for Environmental Pollution and Control, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, PR China
| | - Yingxin Yu
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Key Laboratory for City Cluster Environmental Safety and Green Development of the Ministry of Education, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China.
| | - Taicheng An
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, PR China; Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Key Laboratory for City Cluster Environmental Safety and Green Development of the Ministry of Education, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, PR China
| |
Collapse
|
12
|
Altarawneh M. Temperature-dependent profiles of dioxin-like toxicants from combustion of brominated flame retardants. JOURNAL OF HAZARDOUS MATERIALS 2022; 422:126879. [PMID: 34411962 DOI: 10.1016/j.jhazmat.2021.126879] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/13/2021] [Revised: 07/22/2021] [Accepted: 08/09/2021] [Indexed: 06/13/2023]
Abstract
Literature provides detailed mechanisms underpinning the formation of a wide array of bromine (Br)-containing molecules with a prime focus on dioxin-like compounds. However, from a more applied point of view, the practical deployment of attained thermo-kinetic parameters remains inadequate in the absence of a robust kinetic model that connects bromine transformation at the molecular level with pertinent experimental observations. Herein and to fill in this gap, this study constructs a chemical kinetic model to account for the "homogenous gas phase" emission of Br-aromatic pollutants from the oxidative thermal decomposition of a monobromobenzene molecule (MBZ). The latter serves as a model compound for brominated flame retardants (BFRs) present in e-waste. The model consists of sub-mechanisms (that include reaction rate constants and thermochemical T-dependent functions) for HBr oxidation, combustion mechanism of C1-C6 species, bromine transformation, and synthesis of Br dioxin-like compounds. Reaction rate parameters were obtained for a large array of reactions that constitute the core of the model. For instance, the obtained activation energies for the initial pathways in the formation of brominated biphenyls reside in the range of ~15-45 kJ/mol. Considering oxidation of 5000 ppm MBZ in a plug flow reactor, the model reasonably predicts the temperature-dependent profiles (between 500 and 1200 °C at atmospheric pressure) of a few PBDD/Fs (i.e., polybrominated dibenzo-p-dioxins) isomers in reference to limited corresponding experimental measurements. Most Br dioxin-like compounds appear in the narrow temperature window of 600-1000 °C and achieve their highest abundance at molar yields in the range of 1.0-15 mmol/mol MBZ. A high load (100-120 mmol/mol MBZ) of brominated environmentally persistent free radicals (Br-EPFR) emerges and shifts from bromophenoxy radicals to bromocyclopentadienyl radicals around 700 °C. Oxidation of a 2-bromophenol molecule results in the formation of higher yields of Br-toxicants when compared with that of MBZ. The assembled model provides an informed hazards assessment into the potential emission inventories of Br-compounds in the gas phase at conditions encountered in real scenarios, such as open burning and primitive treatment of e-waste. Via an atomic-base understanding of the complex bromine chemistry and speciation, the model allows the underlying operational conditions that reduce the emission of Br-notorious pollutants to be surveyed and fine-tuned.
Collapse
Affiliation(s)
- Mohammednoor Altarawneh
- United Arab Emirates University, Department of Chemical and Petroleum Engineering, Sheikh Khalifa bin Zayed Street, Al-Ain 15551, United Arab Emirates.
| |
Collapse
|
13
|
Recycling Plastics from WEEE: A Review of the Environmental and Human Health Challenges Associated with Brominated Flame Retardants. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 2022; 19:ijerph19020766. [PMID: 35055588 PMCID: PMC8775953 DOI: 10.3390/ijerph19020766] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Subscribe] [Scholar Register] [Received: 11/27/2021] [Revised: 01/05/2022] [Accepted: 01/07/2022] [Indexed: 01/27/2023]
Abstract
Waste electrical and electronic equipment (WEEE) presents the dual characteristic of containing both hazardous substances and valuable recoverable materials. Mainly found in WEEE plastics, brominated flame retardants (BFRs) are a component of particular interest. Several actions have been taken worldwide to regulate their use and disposal, however, in countries where no regulation is in place, the recovery of highly valuable materials has promoted the development of informal treatment facilities, with serious consequences for the environment and the health of the workers and communities involved. Hence, in this review we examine a wide spectrum of aspects related to WEEE plastic management. A search of legislation and the literature was made to determine the current legal framework by region/country. Additionally, we focused on identifying the most relevant methods of existing industrial processes for determining BFRs and their challenges. BFR occurrence and substitution by novel BFRs (NBFRs) was reviewed. An emphasis was given to review the health and environmental impacts associated with BFR/NBFR presence in waste, consumer products, and WEEE recycling facilities. Knowledge and research gaps of this topic were highlighted. Finally, the discussion on current trends and proposals to attend to this relevant issue were outlined.
Collapse
|
14
|
Zhu J, Huang T, Huang Z, Qin B, Tang Y, Ruan J, Xu Z. An energy-saving and environment-friendly technology for debromination of plastic waste: Novel models of heat transfer and movement behavior of bromine. JOURNAL OF HAZARDOUS MATERIALS 2022; 421:126814. [PMID: 34396969 DOI: 10.1016/j.jhazmat.2021.126814] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2021] [Revised: 08/01/2021] [Accepted: 08/02/2021] [Indexed: 06/13/2023]
Abstract
The recovery and reuse of waste brominated resin, which is a typical plastic waste, is troublesome because it contains toxic brominated flame retardants. Conventional pyrolysis of brominated resin was suggested to be an effective approach for debromination. However, conventional pyrolysis caused high energy consumption and high yield of toxic volatiles. An energy-saving and environment-friendly technology called infrared heating was reported in this study. According to computation of the developed heat transfer models, the critical debromination temperature was 260 °C in infrared heating, which was 271 °C lower than conventional pyrolysis. Meanwhile, no volatile product appeared in the reported technology. In the pyrolysis residue after infrared heating, bromine concentrated orientationally in the fixed and limited area on the resin particles. Free radicals, such as •CH3, H•, and Br•, were combined with Br• generated in infrared heating to form the concentrated bromine. Compared to the chaotic distribution of bromine in conventional pyrolysis, the orientational concentration of bromine was a progress for removing and collecting bromine in infrared heating. Moreover, compared to conventional pyrolysis, infrared heating could decrease 76.2% energy consumption. This work contributed to provide the novel technology for recovery of plastic wastes.
Collapse
Affiliation(s)
- Jie Zhu
- School of Environmental Science and Engineering, Sun Yat-Sen University, 135 Xingang Xi Road, Guangzhou 510275, People's Republic of China
| | - Taiyu Huang
- School of Environmental Science and Engineering, Sun Yat-Sen University, 135 Xingang Xi Road, Guangzhou 510275, People's Republic of China
| | - Zhe Huang
- School of Environmental Science and Engineering, Sun Yat-Sen University, 135 Xingang Xi Road, Guangzhou 510275, People's Republic of China
| | - Baojia Qin
- School of Environmental Science and Engineering, Sun Yat-Sen University, 135 Xingang Xi Road, Guangzhou 510275, People's Republic of China
| | - Yetao Tang
- School of Environmental Science and Engineering, Sun Yat-Sen University, 135 Xingang Xi Road, Guangzhou 510275, People's Republic of China
| | - Jujun Ruan
- School of Environmental Science and Engineering, Sun Yat-Sen University, 135 Xingang Xi Road, Guangzhou 510275, People's Republic of China.
| | - Zhenming Xu
- School of Environmental Science and Engineering, Shanghai Jiaotong University, 800 Dongchuan Road, Shanghai 200240, People's Republic of China
| |
Collapse
|
15
|
Tang J, Lin M, Ma S, Yang Y, Li G, Yu Y, Fan R, An T. Identifying Dermal Uptake as a Significant Pathway for Human Exposure to Typical Semivolatile Organic Compounds in an E-Waste Dismantling Site: The Relationship of Contaminant Levels in Handwipes and Urine Metabolites. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2021; 55:14026-14036. [PMID: 34596389 DOI: 10.1021/acs.est.1c02562] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Dermal exposure to semivolatile organic compounds (SVOCs) has recently attracted widespread attention; understanding these exposures is particularly important for people whose skin is frequently exposed to different pollution surfaces. In this study, handwipes were collected from exposed occupational workers and local residents near a typical electronic waste (e-waste) dismantling area; urine samples were also sampled. The wipes were analyzed for three typical SVOCs: polybrominated diphenyl ethers (PBDEs), polycyclic aromatic hydrocarbons (PAHs), and organophosphate flame retardants (OPFRs). The median levels of PAHs, OPFRs, and PBDEs in handwipes from e-waste dismantlers were 96.0, 183, and 238 ng, respectively. The analytes were higher in the handwipes collected from workers than those from residents, indicating that they were subjected to greater dermal exposure during primitive e-waste dismantling activities. Among the three SVOCs, the strongest correlation was found between triphenyl phosphate (TPhP) in handwipes and diphenyl phosphate (DPhP) in paired urine; the next strongest correlations were between PAHs and PBDEs and their corresponding urinary metabolites. The results showed that TPhP contributed the highest exposure to e-waste dismantlers via dermal exposure. Our research highlights the importance of dermal exposure to TPhP, which should be considered in future exposure risk assessments.
Collapse
Affiliation(s)
- Jian Tang
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Guangdong Technology Research Center for Photocatalytic Technology Integration and Equipment Engineering, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, P. R. China
| | - Meiqing Lin
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Guangdong Technology Research Center for Photocatalytic Technology Integration and Equipment Engineering, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, P. R. China
| | - Shengtao Ma
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Guangdong Technology Research Center for Photocatalytic Technology Integration and Equipment Engineering, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Synergy Innovation Institute of GDUT, Shantou 515041, P. R. China
| | - Yan Yang
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Guangdong Technology Research Center for Photocatalytic Technology Integration and Equipment Engineering, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Synergy Innovation Institute of GDUT, Shantou 515041, P. R. China
| | - Guiying Li
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Guangdong Technology Research Center for Photocatalytic Technology Integration and Equipment Engineering, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, P. R. China
| | - Yingxin Yu
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Guangdong Technology Research Center for Photocatalytic Technology Integration and Equipment Engineering, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, P. R. China
| | - Ruifang Fan
- Guangdong Provincial Engineering Technology Research Center for Drug and Food Biological Resources Processing and Comprehensive Utilization, School of Life Sciences, South China Normal University, Guangzhou 510631, P. R. China
| | - Taicheng An
- Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, P. R. China
- Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, Guangdong Technology Research Center for Photocatalytic Technology Integration and Equipment Engineering, School of Environmental Science and Engineering, Guangdong University of Technology, Guangzhou 510006, P. R. China
| |
Collapse
|
16
|
Altarawneh M, Dlugogorski BZ. Low-temperature oxidation of monobromobenzene: Bromine transformation and yields of phenolic species. CHEMOSPHERE 2021; 280:130621. [PMID: 33964746 DOI: 10.1016/j.chemosphere.2021.130621] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2021] [Revised: 04/15/2021] [Accepted: 04/17/2021] [Indexed: 06/12/2023]
Abstract
Brominated benzenes and phenols constitute direct precursors in the formation of bromine-bearing pollutants; most notably PBDD/Fs and other dioxin-type compounds. Elucidating accurate mechanisms and constructing robust kinetic models for the oxidative transformation of bromobenzenes and bromophenols into notorious Br-toxicants entail a comprehensive understanding of their initial oxidation steps. However, pertinent mechanistic studies, based on quantum chemical calculations, have only focused on secondary condensation reactions into PBDD/Fs and PBDEs. Literature provide kinetic parameters for these significant reactions, nonetheless, without attempting to compile the acquired Arrhenius coefficients into kinetic models. To fill in this gap, this study sets out to illustrate primary chemical phenomena underpinning the low-temperature combustion of a monobromobenzene molecule (MBZ) based on a detail chemical kinetic model. The main aim is to map out temperature-dependent profiles for major intermediates and products. The constructed kinetic model encompasses several sub-mechanisms (i.e, HBr and benzene oxidation, bromination of phenoxy radicals, and initial reaction of oxygen molecules with MBZ). In light of germane experimental observations, the formulated kinetic model herein offers an insight into bromine speciation, conversion profile of MBZ, and formation of higher brominated congeners of benzene and phenol. For instance, the model satisfactorily accounts for the yields of dibromophenols from oxidation of a 2-bromophenol (2-MBP) molecule, in reference to analogous experimental measurements. From an environmental perspective, the model reflects the accumulation of appreciable loads of 2-bromophenoxy radicals at intermediate temperatures (i.e., a bromine-containing environmental persistent free radical, EPFR) from combustion of MBZ and 2-MBP molecules. Acquired mechanistic/kinetic parameters shall be useful in comprehending the complex bromine transformation chemistry in real scenarios, most notably those prevailing in thermal recycling of brominated flame retardants (BFRs).
Collapse
Affiliation(s)
- Mohammednoor Altarawneh
- United Arab Emirates University, Department of Chemical and Petroleum Engineering, Sheikh Khalifa bin Zayed Street, Al-Ain, 15551, United Arab Emirates.
| | - Bogdan Z Dlugogorski
- Charles Darwin University, Office of Deputy Vice-Chancellor and Vice-President, Research & Innovation, Darwin, NT, 0909, Australia
| |
Collapse
|
17
|
Wang N, He L, Lv G, Sun X. Potential environmental fate and risk based on the hydroxyl radical-initiated transformation of atmospheric 1,2-dibromo-4-(1,2dibromoethyl)cyclohexane stereoisomers. JOURNAL OF HAZARDOUS MATERIALS 2021; 417:126031. [PMID: 34020355 DOI: 10.1016/j.jhazmat.2021.126031] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2021] [Revised: 04/10/2021] [Accepted: 04/27/2021] [Indexed: 06/12/2023]
Abstract
1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH), as an emerging brominated flame retardant (EBFR) pollutant, has been often observed in the air, and to comprehend its fate in the environment is still challenging due to the diversity of its stereoisomers. In this work, the environmental transformation behavior and potential toxicological implications of TBECH stereoisomers under the oxidation of OH· in the gas phase were investigated by computational chemistry. Our results indicate the complexity of the TBECH transformation reactions and the diversity of its transformation products in the atmosphere. Although the reactions of TBECH enantiomers with OH· exhibit highly consistency, it is obvious that the reactions of the four diastereoisomers of TBECH with OH· and their subsequent reactions have both specificity and similarity. The dehydrogenation intermediates produced by H-abstraction of OH· in the initial reactions may undergo oxidative debromination, hydroxylation and decomposition reactions, leading to the transformation into low bromine and monohydroxy substituted compounds, as well as debrominated or unbrominated unsaturated fatty ketones. The toxicity assessments show that all transformation products are less toxic to aquatic organisms than TBECH, but some of them are still classified at toxic or harmful levels. More importantly, some transformation products still exhibit carcinogenic and teratogenic activity. To our knowledge, this study provides, for the first time, a deep insight into the transformation mechanism, kinetics, and environmental impacts of atmospheric TBECH by theoretical calculations.
Collapse
Affiliation(s)
- Ning Wang
- Environment Research Institute, Shandong University, Qingdao 266237, China
| | - Lin He
- Atmospheric Chemistry Department (ACD), Leibniz-Institute for Tropospheric Research (TROPOS), Leipzig 04318, Germany
| | - Guochun Lv
- Environment Research Institute, Shandong University, Qingdao 266237, China
| | - Xiaomin Sun
- Environment Research Institute, Shandong University, Qingdao 266237, China.
| |
Collapse
|
18
|
Liu J, Ma S, Lin M, Tang J, Yue C, Zhang Z, Yu Y, An T. New Mixed Bromine/Chlorine Transformation Products of Tetrabromobisphenol A: Synthesis and Identification in Dust Samples from an E-Waste Dismantling Site. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2020; 54:12235-12244. [PMID: 32885965 DOI: 10.1021/acs.est.0c04494] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The large-scale production and usage of tetrabromobisphenol A (TBBPA) and its analogues have caused widespread contamination, raising concern about their potential endocrine disruption effects on both humans and ecosystems. In the present study, debromination and unknown mixed bromine/chlorine transformation products of TBBPA (X-BBPA) were screened in dust samples from an e-waste dismantling site. Five monochloro products (2-chloro-2',6,6'-TriBBPA, 2-chloro-2',6-DiBBPA, 2-chloro-2',6'-DiBBPA, 2-chloro-2'-MoBBPA, and 2-chloro-6-MoBBPA) and two dichloro products (2,2'-dichloro-6,6'-DiBBPA and 2,2'-dichloro-6-MoBBPA) were successfully synthesized and structurally identified. TBBPA and its transformation products were detected by comparison of their mass spectra and retention times with those of synthetic standards. The mean concentration of X-BBPA was 1.63 × 104 ng/g in e-waste dismantling workshop dust samples based on dry weight, which was at a similar level to TBBPA. However, it was 1 order of magnitude lower than the concentrations of the debromination congeners. Thus, both debromination and chlorine-bromine exchange may be important reactions during the thermal processing of e-waste. The results on mixed chlorinated/brominated TBBPA transformation products provided new insights into TBBPA transformation. The elevated levels of the transformation products of TBBPA suggested that these products should be targeted to avoid underestimation of possible health risks.
Collapse
Affiliation(s)
- Jing Liu
- Key Laboratory of Eco-Environment-Related Polymer Materials, Ministry of Education, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou, Gansu 730070, China
| | - Shengtao Ma
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, China
- Synergy Innovation Institute of GDUT, Shantou 515100, China
| | - Meiqing Lin
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, China
| | - Jian Tang
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, China
| | - Congcong Yue
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, China
| | - Zhang Zhang
- Key Laboratory of Eco-Environment-Related Polymer Materials, Ministry of Education, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou, Gansu 730070, China
| | - Yingxin Yu
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, China
| | - Taicheng An
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangzhou Key Laboratory of Environmental Catalysis and Pollution Control, School of Environmental Science and Engineering, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou 510006, China
| |
Collapse
|
19
|
Li W, Achal V. Environmental and health impacts due to e-waste disposal in China - A review. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 737:139745. [PMID: 32516663 DOI: 10.1016/j.scitotenv.2020.139745] [Citation(s) in RCA: 76] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/22/2019] [Revised: 05/02/2020] [Accepted: 05/25/2020] [Indexed: 06/11/2023]
Abstract
E-waste is discarded and shipped mostly to developing countries located in Asian continent for disposal from other developed countries. Especially 70% of the world's e-waste ends up in Guiyu, a small town located in Guangdong Province of China. As little as 25% is recycled in formal recycling centers with adequate protection for workers and the other e-waste arrived in those areas is not handled in organized manner. As per reports only roughly 12.5% of e-waste is actually recycled, and the recycling efforts in those regions are primitive and result in toxic substances being leached into the surrounding ecosystems. In addition to persistent organic pollutants, there are many heavy metals found in the ground and river sediments in Guiyu, exceeding the threshold set to protect human health. Those areas are no longer suitable for growing food, and water is unsafe for drinking, due to the amount of toxins leached into the groundwater and land. Hazardous threats to environment and human health due to hazardous substances of e-waste all around China, as well as the current e-waste management were documented in this review. The article concludes with controlled contamination sources, and eco-friendly and efficient remediation technologies to solve e-waste problem in China.
Collapse
Affiliation(s)
- Weila Li
- Environmental Engineering Program, Guangdong Technion - Israel Institute of Technology, Shantou 515063, China; Technion - Israel Institute of Technology, Haifa 32000, Israel
| | - Varenyam Achal
- Environmental Engineering Program, Guangdong Technion - Israel Institute of Technology, Shantou 515063, China; Technion - Israel Institute of Technology, Haifa 32000, Israel.
| |
Collapse
|