Tough, Self-Adhesive, Antibacterial, and Recyclable Supramolecular Double Network Flexible Hydrogel Sensor Based on PVA/Chitosan/Cyclodextrin

A highly stretchable, self-healing, self-adhesive polyacrylic acid/chitosan multifunctional composite hydrogel for flexible strain sensors

Conductive hydrogels have emerged as excellent candidates for the design and construction of flexible wearable sensors and have attracted great attention in the field of wearable sensors. However, there are still serious challenges to integrating high stretchability, self-healing, self-adhesion, excellent sensing properties, and good biocompatibility into hydrogel wearable devices through easy and green strategies. In this paper, multifunctional conductive hydrogels (PCGB) with good biocompatibility, high tensile (1694 % strain), self-adhesive, and self-healing properties were fabricated by incorporating boric acid (BA) and glucose (Glu) simultaneously into polyacrylic acid (PAA) and chitosan (CS) polymer networks using a simple one-pot polymerization method. Furthermore, the hydrogel strain sensor constructed from the PCGB assembly had great sensing property including high sensitivity (GF = 5.7), durability and stability (5000 cycles). The hydrogel strain sensor was applied to the detection of human motion, which exhibited accurate detection behavior for both large-scale motions and small activities. A strategy to design and fabricate multifunctional conductive hydrogels integrating high stretchability, self-healing, self-adhesion and good biocompatibility was provided, and the multifunctional conductive hydrogels broadened the application of hydrogel-based wearable sensor.

Multifunctional starch-based conductive hydrogels for smart sensors and flexible supercapacitors

In order to overcome harsh working environments and meet eco-friendly demands, the development of environmentally tolerant and recyclable hydrogels is necessary. Herein, multifunctional conductive hydrogel was successfully constructed by introducing starch into polyvinyl alcohol (PVA)/glycerin (Gly)/lithium chloride (LiCl) hydrogel. Starch is rich in active sites (-OH groups) that provide a variety of physical interactions for the construction of polymer hydrogels. PSGL hydrogel exhibited high conductivity (40.65 mS cm-1) and outstanding anti-freezing properties (-40 °C). Meanwhile, PSGL hydrogel retained 82.6 % initial weight after 30 days of exposure and 80 % conductivity retention after recycling. The mechanism of Gly and LiCl in inhibiting the freezing and dehydration of hydrogels was further revealed by density functional theory simulations. Moreover, PSGL hydrogel-based sensors had a satisfactory sensitivity (GF = 1.68 at 0-100 %) and accurately detected human motion. Further, by linking the PSGL hydrogel sensors with Internet of Things technology, human-computer interaction was accomplished. Besides, the PSGL hydrogel-based supercapacitors had a specific capacitance of 120.0 mF cm-2 (0.2 mA cm-2) and 98.17 % capacitance retention after 10,000 cycles. PSGL hydrogel-based devices also worked steadily in extreme environments. Therefore, the PSGL hydrogels have great potential for flexible electronics, soft robotics, energy storage etc.

Self-Healing, Electrically Conductive, Antibacterial, and Adhesive Eutectogel Containing Polymerizable Deep Eutectic Solvent for Human Motion Sensing and Wound Healing

Flexible electronic devices such as wearable sensors are essential to advance human-machine interactions. Conductive eutectogels are promising for wearable sensors, despite their challenges in self-healing and adhesion properties. This study introduces a multifunctional eutectogel based on a novel polymerizable deep eutectic solvent (PDES) prepared by the incorporation of diallyldimethylammonium chloride (DADMAC) and glycerol in the presence of polycyclodextrin (PCD)/dopamine-grafted gelatin (Gel-DOP)/oxidized sodium alginate (OSA). The synthesized eutectogel has reversible Schiff-base bonds, hydrogen bonds, and host-guest interactions, which enable rapid self-healing upon network disruption. GPDO-15 eutectogel has significant tissue adhesion, high stretchability (419%), good ionic conductivity (0.79 mS·cm-1), and favorable antibacterial and self-healing properties. These eutectogels achieve 90% antibacterial effect, show excellent biocompatibility, and can be used as sensors to monitor human activities with strong stability and durability. The in vivo studies indicate that the eutectogels can improve the wound healing process which makes them an effective option for biological dressings.

Ag quantum dots-doped poly (vinyl alcohol)/chitosan hydrogel coatings to prevent catheter-associated urinary tract infections

The prevention of catheter-associated urinary tract infections (CAUTIs) significantly impacts the reduction of morbidity and mortality associated with the use of indwelling urinary catheters. This study focused on developing an antibacterial double network hydrogel coating for latex urinary catheters, which incorporated Ag quantum dots (Ag QDs) in a polyvinyl alcohol (PVA)-chitosan (CS) double network hydrogel matrix. The PVA-CS-Ag QDs, referred to as the PCA hydrogel coating exhibited excellent mechanical and physiochemical properties with controlled release of Ag QDs. The antibacterial properties of the PCA hydrogel-coated urinary catheters were studied against both gram-negative Escherichia coli (E. coli, ATCC25922) and gram-positive Staphylococcus aureus (S. aureus, ATCC29213). The continuous release of CS oligomers and Ag QDs from the hydrogel coating contributed to the synergistic antibacterial and antiadhesion effects. Measurements of the Ag release rate revealed that even after 30 days, the concentration of Ag QDs from the PCA hydrogel-coated urinary catheters remained significantly higher than the effective antibacterial concentration of the total Ag (0.1 μg·L-1). These results indicated that the PCA hydrogel coating not only efficiently prevented bacteria attachment, but also exhibited long-term antibacterial activity, thereby inhibiting biofilm formation. Furthermore, the PCA hydrogel-coated urinary catheter demonstrated excellent biocompatibility and hemocompatibility. Overall, this novel PCA hydrogel-coated urinary catheter, with its exceptional antibacterial properties, holds great potential in reducing the incidence of CAUTIs.

Environmentally stable and multi-functional conductive gelatin/PVA/black wattle bark tannin based organogel as strain, temperature and bioelectric sensor for multi-mode sensing

Conductive hydrogels are regarded as ideal candidates for the application of flexible sensors owing to their excellent flexibility, portability and conductivity. However, it is still challenging and meaningful to prepare multifunctional (self-healing, adhesion, anti-freezing, biocompatibility, antibacterial and conductivity properties) and multi-mode sensing hydrogel-based sensors. Herein, we developed an environmentally stable and multi-functional conductive organogel via dynamic crosslinks based on biomass materials gelatin, black wattle bark tannin and PVA in the propylene glycol/water binary solvent system. Thanks to the dynamic interactions in the system, the good mechanical strength and self-healing performance of the obtained organogel are simultaneously realized. Meanwhile, the organogel integrates many crucial properties such as adhesion, environmental stability (anti-freezing and water retention), biocompatibility, antibacterial behavior and conductivity capacity. Significantly, the organogel can be assembled as three-mode sensors for strain, bioelectricity and temperature sensing. This three-mode sensor can effectively monitor human health data, resulting in providing supplement human health information and conditions. This work displays an interesting approach to construct an intelligent multi-functional conductive biomass organogel based multi-mode flexible sensors.

Aromatic Biobased Polymeric Materials Using Plant Polyphenols as Sustainable Alternative Raw Materials: A Review

In the foreseeable future, the development of petroleum-based polymeric materials may be limited, owing to the gradual consumption of disposable resources and the increasing emphasis on environmental protection policies. Therefore, it is necessary to focus on introducing environmentally friendly renewable biobased materials as a substitute for petroleum-based feed stocks in the preparation of different types of industrially important polymers. Plant polyphenols, a kind of natural aromatic biomolecule, exist widely in some plant species. Benefiting from their special macromolecular structure, high reactivity, and broad abundance, plant polyphenols are potent candidates to replace the dwindling aromatic monomers derived from petroleum-based resources in synthesizing high-quality polymeric materials. In this review, the most related and innovative methods for elaborating novel polymeric materials from plant polyphenols are addressed. After a brief historical overview, the classification, structural characteristics, and reactivity of plant polyphenols are summarized in detail. In addition, some interesting and innovative works concerning the chemical modifications and polymerization techniques of plant polyphenols are also discussed. Importantly, the main chemical pathways to create plant polyphenol-based organic/organic-inorganic polymeric materials as well as their properties and possible applications are systematically described. We believe that this review could offer helpful references for designing multifunctional polyphenolic materials.

Enhancement of Mechanical Properties of Benign Polyvinyl Alcohol/Agar Hydrogel by Crosslinking Tannic Acid and Applying Multiple Freeze/Thaw Cycles

Hydrogels composed of natural and synthetic polymers have considerable potential for use in diverse areas such as biomedical applications and water purification. This is primarily because of their biocompatibility, biodegradability, and low toxicity. The widespread usage of composite hydrogels is hindered by a lack of simultaneous properties, such as high strength and low swelling rate. Herein, we report the preparation of novel hydrogels composed of polyvinyl alcohol (PVA)-intercalated agar polymer networks physically crosslinked with tannic acid. The hydrogel was subjected to multiple freeze/thaw (F/T) cycles (1, 3, and 5), and it was found to exhibit the highest strength after 5 F/T cycles. After 1 F/T cycle, the tensile strength of the composite hydrogel reached 1.56 MPa with a 1.0 wt% crosslinker, whereas after 5 F/T cycles, it increased to 3.77 MPa with a reduced amount (0.75 wt%) of the crosslinker. In addition, the swelling ability decreased upon increasing the crosslinker content and number of F/T cycles. Furthermore, the hydrogel demonstrated excellent water retention and a strong ability to adhere to different substrates. We have successfully implemented an innovative approach to improve the mechanical properties of PVA-based hydrogels by combining the use of tannic acid as a cross-linking agent and multiple F/T cycles. The developed hydrogels are expected to facilitate new developments in hydrogel technology, thus impacting diverse fields such as biomedical (wound dressing and artificial cartilage).

Multifunctional protocatechuic acid-polyacrylic acid hydrogel adhesives for wound dressings

Multifunctional hydrogel adhesives are highly desirable in wound healing applications, yet their preparation often requires complex material system design to achieve. Herein, a straightforward one-pot two-step polymerization method is developed to prepare adhesive hydrogels for wound dressing based on protocatechuic acid (PCA), polyacrylic acid (PAA), and polyamidoamine-epichlorohydrin (PAE), where PCA provides the catechol groups for strong adhesion, PAA serves as the primary polymer matrix, and PAE acts as a bridge connecting PCA and PAA. This design results in a PAA-PAE-PCA hydrogel having a remarkable instant 90-degree peeling interfacial toughness of 431 J m-2 on porcine skin, which is further amplified to 615 J m-2 after 30 minutes. The hydrogel also possesses the desired features for wound dressing, such as self-healing, antioxidant, anti-UV and antibacterial properties, good cytocompatibility, strong adhesion in use and weak adhesion on removal, as well as reversible and wet adhesion. Finally, in vivo data reveal that the PAA-PAE-PCA hydrogels can significantly accelerate wound healing, as evidenced by a noticeable reduction in the wound area and a diminished inflammatory response. Collectively, these results endorse the obtained multifunctional hydrogel as a promising candidate for wound healing and related fields.

Using chitosan nanofibers to simultaneously improve the toughness and sensing performance of chitosan-based ionic conductive hydrogels

Conductive hydrogels, especially polysaccharide-based ionic conductive hydrogels, have received increasing interest in the field of wearable sensors due to their similarity to human skin. Nevertheless, it is still a challenging task to simultaneously prepare a self-healed and adhesive conductive hydrogel with good toughness, temperature tolerance and high sensing performance, especially with high sensitivity and a low detection limit. Herein, we developed a new strategy to improve the toughness and sensing performance of a multifunctional conductive hydrogel by simultaneously using dissolved chitosan (CS) and solid chitosan nanofibers (CSFs) to induce the formation of hierarchical polymeric networks in the hydrogel. The tensile strength and elongation at break of the hydrogel could be improved from 70.3 kPa and 1005 % to 173.9 kPa and 1477 %, respectively, simply by introducing CSFs to the hydrogel, and its self-healing, adhesive and antibacterial properties were effectively retained. When serving as a resistive sensing material, the introduction of CSFs increased the gauge factor of the hydrogel-based strain sensor from 8.25 to 14.27. Moreover, the hydrogel-based strain sensor showed an ultralow detection limit of 0.2 %, excellent durability and stability (1000 cycles) and could be used to detect various human activities. In addition, the hydrogel prepared by using a water-glycerol binary solvent system showed temperature-tolerant performance and possessed adequate sensitivity when serving as a resistive sensing material. Therefore, this work provides a new way to prepare multifunctional conductive hydrogels with good toughness, sensing performance and temperature tolerance to expand the application range of hydrogel-based strain sensors.

Conductive and Eco-friendly Biomaterials-based Hydrogels for Noninvasive Epidermal Sensors: A Review

As noninvasive wearable electronic devices, epidermal sensors enable continuous, real-time, and remote monitoring of various human physiological parameters. Conductive biomaterials-based hydrogels as sensor matrix materials have good biocompatibility, biodegradability, and efficient stimulus response capabilities and are widely applied in motion monitoring, healthcare, and human-machine interaction. However, biomass hydrogel-based epidermal sensing devices still need excellent mechanical properties, prolonged stability, multifunctionality, and extensive practicality. Therefore, this paper reviews the common biomass hydrogel materials for epidermal sensing (proteins, polysaccharides, polyphenols, etc.) and the various types of noninvasive sensing devices (strain/pressure sensors, temperature sensors, glucose sensors, electrocardiograms, etc.). Moreover, this review focuses on the strategies of scholars to enhance sensor properties, such as strength, conductivity, stability, adhesion, and self-healing ability. This work will guide the preparation and optimization of high-performance biomaterials-based hydrogel epidermal sensors.

Copolymer-grafted cellulose nanocrystal induced nanocomposite hydrogels with enhanced strength, high elasticity and adhesiveness for flexible strain and pressure sensors

Recently, the application of cellulose nanocrystals (CNCs) in the field of hydrogel sensors has attracted much attention. However, it remains challenging to construct CNC-reinforced conductive hydrogels with a combination of enhanced strength, low hysteresis, high elasticity and remarkable adhesiveness. Herein, we present a facile method to prepare conductive nanocomposite hydrogels with the above-mentioned properties by reinforcing chemically crosslinked poly(acrylic acid) (PAA) hydrogel with rational-designed copolymer-grafted CNCs. The copolymer-grafted CNCs interact with PAA matrix to form carboxyl-amide conventional hydrogen bonds and carboxyl-amino ionic hydrogen bonds, among which the ionic hydrogen bonds with rapid recovery capability are critical to the low hysteresis and high elasticity of hydrogel. The introduction of copolymer-grafted CNCs endowed the hydrogels with enhanced tensile/compressive strength, high resilience (>95 %) during tensile cyclic loading, rapid self-recovery during compressive cyclic loading and improved adhesiveness. Thanks to the high elasticity and durability of hydrogel, the assembled hydrogel sensors exhibited good cycling repeatability and durability in detecting various strains, pressures and human motions. The hydrogel sensors also showed satisfying sensitivity. Hence, the proposed preparation method and the obtained CNC-reinforced conductive hydrogels would open new avenues in flexible strain and pressure sensors for human motion detection and beyond.

Tough polyvinyl alcohol-gelatin biological macromolecules ionic hydrogel temperature, humidity, stress and strain, sensors

High strength, high toughness and high sensitivity were some of the most popular characteristics of flexible sensors. However, the mechanical properties and reproducibility of current single biomacromolecule gelatin hydrogel sensors are lower, and few hydrogel sensors have been able to provide excellent mechanical properties and flexibility at the same time so far. To address this challenge, a simple method to prepare tough polyvinyl alcohol (PVA) and gelatin hydrogel was proposed in this study. The PVA-gelatin-Fe3+ biological macromolecules hydrogel was prepared by a freeze-casting-assisted solution substitution method, which exhibited high strength (2.5 MPa), toughness (7.22 MJ m-3), and excellent temperature, humidity, stress, strain, and human motion sensing properties. This combination of mechanical properties and flexibility makes PVA-gelatin biological macromolecules hydrogel a promising material for flexible sensing. In addition, an ionic immersion strategy could also impart multiple functions to the hydrogel and be applied to various hydrogel sensor materials. Thus, this work provided an all-around solution for the preparation of advanced and robust sensors with good application prospects.

Nanocellulose-assisted 3D-printable, transparent, bio-adhesive, conductive, and biocompatible hydrogels as sensors and moist electric generators

Transparent hydrogels have found increasing applications in wearable electronics, printable devices, and tissue engineering. Integrating desired properties, such as conductivity, mechanical strength, biocompatibility, and sensitivity, in one hydrogel remains challenging. To address these challenges, multifunctional hydrogels of methacrylate chitosan, spherical nanocellulose, and β-glucan with distinct physicochemical characteristics were combined to develop multifunctional composite hydrogels. The nanocellulose facilitated the self-assembly of the hydrogel. The hydrogels exhibited good printability and adhesiveness. Compared with the pure methacrylated chitosan hydrogel, the composite hydrogels exhibited improved viscoelasticity, shape memory, and conductivity. The biocompatibility of the composite hydrogels was monitored using human bone marrow-derived stem cells. Their motion-sensing potential was analyzed on different parts of the human body. The composite hydrogels also possessed temperature-responsiveness and moisture-sensing abilities. These results suggest that the developed composite hydrogels demonstrate excellent potential to fabricate 3D-printable devices for sensing and moist electric generator applications.

Advances in preparation and application of antibacterial hydrogels

Bacterial infections, especially those caused by drug-resistant bacteria, have seriously threatened human life and health. There is urgent to develop new antibacterial agents to reduce the problem of antibiotics. Biomedical materials with good antimicrobial properties have been widely used in antibacterial applications. Among them, hydrogels have become the focus of research in the field of biomedical materials due to their unique three-dimensional network structure, high hydrophilicity, and good biocompatibility. In this review, the latest research progresses about hydrogels in recent years were summarized, mainly including the preparation methods of hydrogels and their antibacterial applications. According to their different antibacterial mechanisms, several representative antibacterial hydrogels were introduced, such as antibiotics loaded hydrogels, antibiotic-free hydrogels including metal-based hydrogels, antibacterial peptide and antibacterial polymers, stimuli-responsive smart hydrogels, and light-mediated hydrogels. In addition, we also discussed the applications and challenges of antibacterial hydrogels in biomedicine, which are expected to provide new directions and ideas for the application of hydrogels in clinical antibacterial therapy.

Electrochemical Wearable Biosensors and Bioelectronic Devices Based on Hydrogels: Mechanical Properties and Electrochemical Behavior

Hydrogel-based wearable electrochemical biosensors (HWEBs) are emerging biomedical devices that have recently received immense interest. The exceptional properties of HWEBs include excellent biocompatibility with hydrophilic nature, high porosity, tailorable permeability, the capability of reliable and accurate detection of disease biomarkers, suitable device-human interface, facile adjustability, and stimuli responsive to the nanofiller materials. Although the biomimetic three-dimensional hydrogels can immobilize bioreceptors, such as enzymes and aptamers, without any loss in their activities. However, most HWEBs suffer from low mechanical strength and electrical conductivity. Many studies have been performed on emerging electroactive nanofillers, including biomacromolecules, carbon-based materials, and inorganic and organic nanomaterials, to tackle these issues. Non-conductive hydrogels and even conductive hydrogels may be modified by nanofillers, as well as redox species. All these modifications have led to the design and development of efficient nanocomposites as electrochemical biosensors. In this review, both conductive-based and non-conductive-based hydrogels derived from natural and synthetic polymers are systematically reviewed. The main synthesis methods and characterization techniques are addressed. The mechanical properties and electrochemical behavior of HWEBs are discussed in detail. Finally, the prospects and potential applications of HWEBs in biosensing, healthcare monitoring, and clinical diagnostics are highlighted.

Simple and Rapid Way to a Multifunctionally Conductive Hydrogel for Wearable Strain Sensors

Conductive hydrogels have gained increasing attention in the field of wearable smart devices. However, it remains a big challenge to develop a multifunctionally conductive hydrogel in a rapid and facile way. Herein, a conductive tannic acid-iron/poly (acrylic acid) hydrogel was synthesized within 30 s at ambient temperature by the tannic acid-iron (TA@Fe3+)-mediated dynamic catalytic system. The TA@Fe3+ dynamic redox autocatalytic pair could efficiently activate the ammonium persulfate to initiate the free-radical polymerization, allowing the gelation to occur easily and rapidly. The resulting hydrogel exhibited enhanced stretchability (3560%), conductivity (33.58 S/m), and strain sensitivity (gauge factor = 2.11). When damaged, it could be self-healed through the dynamic and reversible coordination bonds between the Fe3+ and COO- groups in the hydrogel network. Interestingly, the resulting hydrogel could act as a strain sensor to monitor various human motions including the huge movement of deformations (knuckle, wrist) and subtle motions (smiling, breathing) in real time due to its enhanced self-adhesion, good conductivity, and improved strain sensitivity. Also, the obtained hydrogel exhibited efficient electromagnetic interference (EMI) shielding performance with an EMI shielding effectiveness value of 24.5 dB in the X-band (8.2-12.4 GHz). Additionally, it displayed antibacterial properties, with the help of the activity of TA.

Sodium alginate reinforced polyacrylamide/xanthan gum double network ionic hydrogels for stress sensing and self-powered wearable device applications

Strong and ductile sodium alginate (SA) reinforced polyacrylamide (PAM)/xanthan gum (XG) double network ionic hydrogels were constructed for stress sensing and self-powered wearable device applications. In the designed network of PXS-Mⁿ⁺/LiCl (short for PAM/XG/SA-Mⁿ⁺/LiCl, where Mⁿ⁺ stands for Fe³⁺, Cu²⁺ or Zn²⁺), PAM acts as a flexible hydrophilic skeleton, and XG functions as a ductile second network. The macromolecule SA interacts with metal ion Mⁿ⁺ to form a unique complex structure, significantly improving the mechanical strength of the hydrogel. The addition of inorganic salt LiCl endows the hydrogel with high electrical conductivity, and meanwhile reduces the freezing point and prevents water loss of the hydrogel. PXS-Mⁿ⁺/LiCl exhibits excellent mechanical properties and ultra-high ductility (a fracture tensile strength up to 0.65 MPa and a fracture strain up to 1800%), and high stress-sensing performance (a high GF up to 4.56 and pressure sensitivity of 0.122). Moreover, a self-powered device with a dual-power-supply mode, i.e., PXS-Mⁿ⁺/LiCl-based primary battery and TENG, and a capacitor as the energy storage component was constructed, which shows promising prospects for self-powered wearable electronics.

Bio-Inspired Homogeneous Conductive Hydrogel with Flexibility and Adhesiveness for Information Transmission and Sign Language Recognition

The wearable electronic technique is increasingly becoming an effective approach to overcoming the communication obstacles between signers and non-signers. However, the efficacy of conducting hydrogels currently proposed as flexible sensor devices is hindered by their poor processability and matrix mismatch, which frequently results in adhesion failure at the combined interfaces and deterioration of mechanical and electrochemical performance. Herein, we propose a hydrogel composed of a rigid matrix in which the hydrophobic and aggregated polyaniline was homogeneously embedded, while quaternate-functionalized nucleobase moieties endowed the flexible network with adhesiveness. Accordingly, the resulting hydrogel with chitosan-graft-polyaniline (chi-g-PANI) copolymers exhibited a promising conductivity (4.8 S·m^-1) because of the uniformly dispersed polyaniline components and a high strain strength (0.84 MPa) because of the chain entanglement of chitosan after soaking. In addition, the modified adenine molecules not only realized synchronization in improving the stretchability (up to 1303%) and exhibiting a skin-like elastic modulus (≈184 kPa), but also provided a durable interfacial contact with various materials. The hydrogel was further fabricated into a strain-monitoring sensor for information encryption and sign language transmission based on its sensing stability and strain sensitivity of up to 2.77. The developed wearable sign language interpreting system provides an innovative strategy to assist auditory or speech-impaired people in communicating with non-signers using visual-gestural patterns including body movements and facial expressions.

An injectable and self-healing hydrogel with dual physical crosslinking for in-situ bone formation

Although hydrogels have been widely studied because of their satisfactory biocompatibility and plasticity, their application is limited in bone tissue engineering (BTE) owing to their inadequate mechanical properties and absence of osteogenic activity. To address this issue, we developed an updated alendronate (ALN)-Ca2+/Mg2+-doped supramolecular (CMS) hydrogel based on our previously developed mechanically resilient "host-guest macromer" (HGM) hydrogel to improve the hydrogel's mechanical properties and osteogenic activity. The CMS hydrogel was prepared by introducing a new physical crosslinking comprising the strong chelation of the comonomer acrylate alendronate (Ac-ALN) and Ca2+/Mg2+ in the HGM hydrogel. Compared with the previously developed HGM hydrogel, the upgraded CMS hydrogel presented better mechanical properties because of the additional physical crosslinking, while possessing injectable and self-healing properties like the HGM hydrogel. Moreover, the addition of Ac-ALN and Ca2+/Mg2+ also effectively promoted the in vitro proliferation, migration, and osteogenic differentiation of bone marrow-derived stem cells. The healing effect of a rat cranial defect further proved that the in vivo bone regeneration ability of CMS hydrogel was better than that of HGM hydrogel. The updated CMS hydrogel shows significant potential for BTE application.

Self-healing, self-adhesive, and stretchable conductive hydrogel for multifunctional sensor prepared by catechol modified nanocellulose stabilized poly(α-thioctic acid)

Self-healing, self-adhesive, and stretchable bio-based conductive hydrogels exhibit properties similar to those of biological tissues, making them an urgent requirement for emerging wearable devices. The primary challenge lies in devising straightforward strategies to accomplish all the aforementioned performances and achieve equilibrium among them. This study used the natural compound thioctic acid (TA) and modified cellulose to prepare conductive hydrogels with stretchability, healing, and self-adhesion through a simple one-step strategy. Metastable poly(TA) was obtained through ring-opening polymerization of lithiated TA, followed by the introduction of dopamine-grafted cellulose nanofibers (DCNF) to stabilize poly(TA) and prepare PTALi/DCNF hydrogels with the aforementioned properties. The hydrogels demonstrated remarkable conductivity, attributed to the existence of Li + ions, with a maximum conductivity of 17.36 mS/cm. The self-healing capacity of the hydrogels was achieved owing to the presence of disulfide bond in TA. The introduction of DCNF can effectively stabilize poly(TA), endow the hydrogel with self-adhesion ability, improve the mechanical properties, and further enhance the formability of hydrogels. Generally, bio-based PTALi/DCNF hydrogels with stretchability, self-healing, self-adhesion, and conductivity are obtained through a simple strategy and used as a sensor with a wide response range and high sensitivity. Hydrogels have significant potential for application in wearable electronic devices, electronic skins, and soft robots.

Cellulose nanocrystals boosted hydrophobic association in dual network polymer hydrogels as advanced flexible strain sensor for human motion detection

Conductive hydrogels attract the attention of researchers worldwide, especially in the field of flexible sensors like strain and pressure. These flexible materials have potential applications in the field of electronic skin, soft robotics, energy storage, and human motion detection. However, its practical application is limited due to low stretchability, high hysteresis energy, low conductivity, long-range strain sensitivity, and high response time. It's still a challenging job to endow all these properties in a single hydrogel network. In the present work, cellulose nano crystals (CNCs) reinforced hydrophobically associated gels were developed using APS as a source of radical polymerization, acrylamide and lauryl methacrylate were used as a monomer. CNCs reinforced the hydrophobically associated hydrogels through hydrogen bonding to retain the hydrogel's network structure. Hydrogels consist of dual crosslinking, which demonstrate exceptional mechanical performance (fracture stress and strain, toughness, and Young's modulus). The low hysteresis energy (10.9 kJm^-3) and high conductivity (22.97 mS/cm) make the hydrogels a strong candidate for strain sensors with high sensitivity (GF = 19.25 at 700% strain) and a fast response time of 200 ms. Cyclic performance was also investigated up to 300 continuous cycles. After 300 cycles, the hydrogels were still stable and no considerable change was observed. These hydrogels are capable of sensing different human motions like wrist, finger bending, and neck (up-down and straight and right/left motion of neck). The hydrogels also demonstrate changes in current in response to swallowing, different speaking words, and writing different alphabets. These results suggest that our prepared materials can sense different small and large human motions, and also could be used in any electronic device where strain sensing is required.

Chestnut-Tannin-Crosslinked, Antibacterial, Antifreezing, Conductive Organohydrogel as a Strain Sensor for Motion Monitoring, Flexible Keyboards, and Velocity Monitoring

Flexible sensing devices (FSDs) fabricated using conductive hydrogels have attracted researchers' extensive enthusiasm in recent years due to their versatility. Considering the complexity of their application environments, the integration of various functional characteristics (e.g., excellent mechanical, antibacterial, and antifreezing properties) is an important guarantee for FSDs to stably perform their applications in different environments. Herein, we developed a multifunctional conductive polyvinyl alcohol (PVA) organohydrogel PVA-CT-Ag-Al-Gly (PCAAG) by using a green, natural, and cheap biomass, chestnut tannin (CT), as a crosslinking agent, nano-silver particles (AgNPs) as an antimicrobial agent, aluminum trichloride (AlCl₃) as a conducting medium, and the mixed water-glycerol as the solvent system. In this organohydrogel system, CT acted not only as the reducing and stabilizing agent for the preparation of antibacterial AgNPs but also as the crosslinking agent owing to its strong multiple hydrogen bonding interactions with PVA, realizing its multifunctional application. The PCAAG organohydrogel possessed outstanding physical and mechanical properties (350.54% of the maximum fracture strain and 1.55 MPa of the maximum tensile strength), considerable bacteriostatic effects against both Escherichia coli and Staphylococcus aureus, and excellent freeze resistance (it could function normally at -20 °C). The motion-monitoring sensor based on the PCAAG organohydrogel exhibited excellent specificity recognition for both large-amplitude (e.g., elbow bending, wrist bending, finger bending, running and walking, etc.) and small-amplitude (frowning and swallowing) human movements. The flexible keyboard constructed by using the PCAAG organohydrogel could easily achieve the transformation between digital signals and electrical signals, and the signal output had both specificity and stability. The velocity-monitoring sensor fabricated by using the PCAAG organohydrogel could accurately measure the speed of the object movement (less than 3% of relative error). In short, the present PCAAG organohydrogel solves the problems of the single application environment and a few application scenarios of traditional conductive hydrogels and possesses remarkable application potential as a multifunctional FSD in many fields such as artificial intelligence, sport management, soft robots, and human-computer interface.

Acetylated Distarch Phosphate-Mediated Tough and Conductive Hydrogel for Antibacterial Wearable Sensors

Conductive, stretchable, and flexible hydrogel wearable sensors have attracted extensive attention in the fields of artificial intelligence and electronic equipment. However, it is an enormous challenge to fabricate conductive hydrogel sensors with biocompatibility, antibacterial properties, and toughness. Here, a highly conductive hydrogel with excellent toughness, good biocompatibility, and strong antibacterial properties was prepared by incorporating acetylated distarch phosphate (ADSP) into poly(vinyl alcohol) (PVA)/polyhexamethylene biguanide hydrochloride (PHMG). The addition of ADSP not only ionized sodium ions to make the hydrogel conductive but also provided abundant hydroxyl groups to form hydrogen bonds with PVA to improve the toughness of the hydrogel. Furthermore, PHMG endowed the hydrogel with antibacterial properties toward E. coli (Escherichia coli, Gram-negative bacteria) and S. aureus (Staphylococcus aureus, Gram-positive bacteria). Meanwhile, the hydrogel was implanted in mice for 14 days, and the surrounding tissue remained in good condition. More importantly, the hydrogel could detect ECG signals and electrical signals under different actions. This study affords a novel approach for exploiting wearable sensors with antibacterial properties and biocompatibility.

Enhancing Strain-Sensing Properties of the Conductive Hydrogel by Introducing PVDF-TrFE

Conductive hydrogels have attracted attention because of their wide application in wearable devices. However, it is still a challenge to achieve conductive hydrogels with high sensitivity and wide frequency band response for smart wearable strain sensors. Here, we report a composite hydrogel with piezoresistive and piezoelectric sensing for flexible strain sensors. The composite hydrogel consists of cross-linked chitosan quaternary ammonium salt (CHACC) as the hydrogel matrix, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT: PSS) as the conductive filler, and poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) as the piezoelectric filler. A one-pot thermoforming and solution exchange method was used to synthesize the CHACC/PEDOT: PSS/PVDF-TrFE hydrogel. The hydrogel-based strain sensor exhibits very high sensitivity (GF: 19.3), fast response (response time: 63.2 ms), and wide frequency range (response frequency: 5-25 Hz), while maintaining excellent mechanical properties (elongation at break up to 293%). It can be concluded that enhanced strain-sensing properties of the hydrogel are contributed to both greater change in the relative resistance under stress and wider response to dynamic and static stimulus by adding PVDF-TrFE. This has a broad application in monitoring human motion, detecting subtle movements, and identifying object contours and a hydrogel-based array sensor. This work provides an insight into the design of composite hydrogels based on piezoelectric and piezoresistive sensing with applications for wearable sensors.

Recent advances in host-guest supramolecular hydrogels for biomedical applications

The recognition-directed host-guest interaction is recognized as a valuable tool for creating supramolecular polymers. Functional hydrogels constructed through the dynamic and reversible host-guest complexation are endowed with a great many appealing features, such as superior self-healing, injectability, flexibility, stimuli-responsiveness and biocompatibility, which are crucial for biological and medicinal applications. With numerous topological structures and host-guest combinations established previously, recent breakthroughs in this area mostly focus on further improvement and fine-tuning of various properties for practical utilizations. The current contribution provides a comprehensive overview of the latest developments in host-guest supramolecular hydrogels, with a particular emphasis on the innovative molecular-level design strategies and hydrogel formation methodologies targeting at a wide range of active biomedical domains, including drug delivery, 3D printing, wound healing, tissue engineering, artificial actuators, biosensors, etc. Furthermore, a brief conclusion and discussion on the steps forward to bring these smart hydrogels to clinical practice is also presented.

A robust and sensitive flexible strain sensor based on polyurethane cross-linked composite hydrogels for the detection of human motion

Polyurethane cross-linked composite hydrogel and wireless Bluetooth module were assembled for the detection of human motion.