Enhanced Electrochemical CO2 Reduction by a Series of Molecular Rhenium Catalysts Decorated with Second-Sphere Hydrogen-Bond Donors

Fast Catalysis at Low Overpotential: Designing Efficient Dicationic Re(bpy2+)(CO)3I Electrocatalysts for CO2 Reduction

We report a series of isomeric, dicationic Re(bpy2+)(CO)3I complexes with bpy (2,2'-bipyridine) modified by two phenyl-CH2-(NMe3)+ pendants with cations located at variable distances from the active site for electrocatalytic CO2 reduction in CH3CN/2.8 M H2O. The position of the cationic groups dramatically increases the rate of catalysis by ∼800-fold, from 1.2 to 950 s-1, with only a minor increase in overpotential. Acceleration is due to stabilization of the initial CO2 adduct and lowering of ΔG‡ for C-OH bond cleavage by Coulombic stabilization of anionic charges. Performance may be enhanced by accumulation in the electrochemical double layer. Transition state stabilization in the optimized isomer unlocks the low overpotential "protonation-first" pathway, highlighting the sizable effects of subtle structural optimization.

Three-Way Control on Product Selectivity in Electrocatalytic CO2 Reduction Reaction Using a Single Molecular Co-NHC Catalyst

For a long time, molecular electrocatalysts have been developed to reduce CO2 efficiently to value-added products such as CO and HCO2H, along with H2; however, selectivity remained as a major issue. Recent work toward addressing this issue showed that several different catalysts could be used to achieve product selectivity. It is desirable that instead of using different catalysts for specific products, a single catalyst should be able to produce the target products by subtle tuning of the reaction conditions. Toward this objective, herein we presented the organometallic Co electrocatalyst Co-NHCU and successfully utilized it in the electrochemical CO2 reduction reaction (CO2RR) to produce CO, H2, and HCO2H with notable selectivity. The reduction of CO2 selectively produced CO with 81 ± 2% Faradaic efficiency (FE) in the presence of 5% H2O as a proton source. The selectivity was changed toward H2 with 80 ± 3% FE when 1.5 M triethylamine was added as an additive in the presence of 10% H2O as a proton source. In the presence of 1.0 M morpholine as an external additive, the CO2-saturated solution containing 10% trifluoroethanol as a proton source generates 55 ± 5% HCO2H as the predominant product, with H2 as a competitive side product. It was found that the combined effect of the proton source and the additive in association with the nature of the Co-NHCU catalyst changed the selectivity of the products in this reaction.

Electrocatalytic reduction of CO2 to CO by a series of organometallic Re(I)-tpy complexes

A series of organometallic Re(I)(L)(CO)3Br complexes with 4'-substituted terpyridine ligands (L) has been synthesised as electrocatalysts for CO2 reduction. The complexes' spectroscopic characterisation and computationally optimised geometry demonstrate a facial geometry around Re(I) with three cis COs and the terpyridine ligand coordinating in a bidentate mode. The effect of substitution on the 4'-position of terpyridine (Re1-5) on CO2 electroreduction was investigated and compared with a known Lehn-type catalyst, Re(I)(bpy)(CO)3Br (Re7). All complexes catalyse CO evolution in homogeneous organic media at moderate overpotentials (0.75-0.95 V) with faradaic yields of 62-98%. The electrochemical catalytic activity was further evaluated in the presence of three Brønsted acids to demonstrate the influence of the pKa of the proton sources. The TDDFT and ultrafast transient absorption spectroscopy (TAS) studies showed combined charge transfer bands of ILCT and MLCT. Amongst the series, the Re-complex containing a ferrocenyl-substituted terpyridine ligand (Re5) shows an additional intra-ligand charge transfer band and was probed using UV-Vis spectroelectrochemistry.

CO2 Activation with Manganese Tricarbonyl Complexes through an H-Atom Responsive Benzimidazole Ligand

Herein, we report the synthesis and characterization of two manganese tricarbonyl complexes, MnI (HL)(CO)3 Br (1 a-Br) and MnI (MeL)(CO)3 Br (1 b-Br) (where HL=2-(2'-pyridyl)benzimidazole; MeL=1-methyl-2-(2'-pyridy)benzimidazole) and assayed their electrocatalytic properties for CO2 reduction. A redox-active pyridine benzimidazole ancillary ligand in complex 1 a-Br displayed unique hydrogen atom transfer ability to facilitate electrocatalytic CO2 conversion at a markedly lower reduction potential than that observed for 1 b-Br. Notably, a one-electron reduction of 1 a-Br yields a structurally characterized H-bonded binuclear Mn(I) adduct (2 a') rather than the typically observed Mn(0)-Mn(0) dimer, suggesting a novel method for CO2 activation. Combining advanced electrochemical, spectroscopic, and single crystal X-ray diffraction techniques, we demonstrate the use of an H-atom responsive ligand may reveal an alternative, low-energy pathway for CO2 activation by an earth-abundant metal complex catalyst.

Second Sphere Effects Promote Formic Acid Dehydrogenation by a Single-Atom Gold Catalyst Supported on Amino-Substituted Graphdiyne

Regulating the second sphere of homogeneous molecular catalysts is a common and effective method to boost their catalytic activities, while the second sphere effects have rarely been investigated for heterogeneous single-atom catalysts primarily due to the synthetic challenge for installing functional groups in their second spheres. Benefiting from the well-defined and readily tailorable structure of graphdiyne (GDY), an Au single-atom catalyst on amino-substituted GDY is constructed, where the amino group is located in the second sphere of the Au center. The Au atoms on amino-decorated GDY displayed superior activity for formic acid dehydrogenation compared with those on unfunctionalized GDY. The experimental studies, particularly the proton inventory studies, and theoretical calculations revealed that the amino groups adjacent to an Au atom could serve as proton relays and thus facilitate the protonation of an intermediate Au-H to generate H₂ . Our study paves the way to precisely constructing the functional second sphere on single-atom catalysts.

Exploring the Parameters Controlling Product Selectivity in Electrochemical CO2 Reduction in Competition with Hydrogen Evolution Employing Manganese Bipyridine Complexes

Selective reduction of CO₂ is an efficient solution for producing nonfossil-based chemical feedstocks and simultaneously alleviating the increasing atmospheric concentration of this greenhouse gas. With this aim, molecular electrocatalysts are being extensively studied, although selectivity remains an issue. In this work, a combined experimental-computational study explores how the molecular structure of Mn-based complexes determines the dominant product in the reduction of CO₂ to HCOOH, CO, and H₂. In contrast to previous Mn(bpy-R)(CO)₃Br catalysts containing alkyl amines in the vicinity of the Br ligand, here, we report that bpy-based macrocycles locking these amines at the side opposite to the Br ligand change the product selectivity from HCOOH to H₂. Ab initio molecular dynamics simulations of the active species showed that free rotation of the Mn(CO)₃ moiety allows for the approach of the protonated amine to the reactive center yielding a Mn-hydride intermediate, which is the key in the formation of H₂ and HCOOH. Additional studies with DFT methods showed that the macrocyclic moiety hinders the insertion of CO₂ to the metal hydride favoring the formation of H₂ over HCOOH. Further, our results suggest that the minor CO product observed experimentally is formed when CO₂ adds to Mn on the side opposite to the amine ligand before protonation. These results show how product selectivity can be modulated by ligand design in Mn-based catalysts, providing atomistic details that can be leveraged in the development of a fully selective system.

Rhenium(I)-tricarbonyl complexes with methimazole and its selenium analogue: Syntheses, characterization and cell toxicity

This study explores the effect of a thione/selone ligand on the cell toxicity (in vitro) and light activity of diimine Re(CO)₃⁺ complexes. Six rhenium(I) complexes with general formula fac-[Re(CO)₃(N,N')X]⁺ were prepared, where X = 2-mercapto-1-methylimidazole (methimazole; MMI), and 1-methylimidazole-2-selone (MSeI); N,N' = 2,2'-bipyridine (bpy), 1,10-phenanthroline (phen) and 2,9-dimethyl-1,10-phenanthroline (dmphen). Their triflate salts were characterized using single-crystal X-ray diffraction, ¹H, ¹³C and 2D NMR, UV-vis and vibrational spectroscopy. Their cytotoxic properties were tested, showing significant cytotoxicity (IC₅₀ = 8.0-55 μM) towards the human breast cancer cell line MDA-MB-231. The half-inhibitory concentration (IC₅₀) for fac-[Re(CO)₃(dmphen)(MMI)]⁺, the most toxic complex in this series (8.0 ± 0.2 μM), was comparable to that of the corresponding aqua complex fac-[Re(CO)₃(dmphen)(H₂O)]⁺ with IC₅₀ = 6.0 ± 0.1 μM. The fac-[Re(CO)₃(bpy)(MMI/MSeI)]⁺ complexes were somewhat less toxic towards the human embryonic kidney cell line HEK-293 T after 48 h of exposure. The stability of the complexes upon irradiation was monitored using UV-vis spectroscopy, with no CO released when exposed to UV-A light (λ = 365 nm).

Two-Electron-Induced Reorganization of Cobalt Coordination and Metal-Ligand Cooperative Redox Shifting Co(I) Reactivity toward CO2 Reduction

Electrochemical reorganization of complex structures is directly related to catalytic reactivity; thus, the geometric changes of catalysts induced by electron transfer should be considered to scrutinize the reaction mechanism. Herein, we studied electron-induced reorganization patterns of six-coordinate Co complexes with neutral N-donor ligands. Upon two-electron transfer into a Co center enclosed within a bulky π-acceptor ligand, the catalytic site exhibited different reorganization patterns depending on the ligand characteristics. While a bipyridyl ligand released Co-bound solvent (CH₃CN) to open a reaction site, a phenanthroline ligand caused Co-N_arm (side "arm" of NNN-ligand) bond dissociation. The first electron transfer occurred in the Co(II/I) reduction step and the second electron entered the bulky π-acceptor, of which redox steps were assigned from cyclic voltammograms, magnetic moment measurements, and DFT calculations. In comparison, the Co complex of [NNN^NCH₃-Co(CH₃CN)₃](PF₆)₂ ([1-(CH₃CN)₃](PF₆)₂) showed a high H₂ evolution reactivity (HER), whereas a series of Co complexes with bulky π-acceptors such as [NNN^NCH₃-Co(L)(CH₃CN)](PF₆)₂ (L = phen ([2-CH₃CN](PF₆)₂), bpy ([3-CH₃CN](PF₆)₂), [NNN^NCH₃-Co(tpy)](PF₆)₂ ([4](PF₆)₂), and [NNN^CH₂-Co(phen)(CH₃CN)](PF₆)₂ ([5-CH₃CN](PF₆)₂)) suppressed the HER but rather enhanced the CO₂ reduction reaction. The metal-ligand cooperative redox steps enabled the shift of Co(I) reactivity toward CO₂ reduction. Additionally, the amine pendant attached to the NNN^NCH₃-ligand could stabilize the CO₂ reduction intermediate through the hydrogen-bonding interaction with the Co-CO₂H adduct.

Photoinduced Processes in Rhenium(I) Terpyridine Complexes Bearing Remote Amine Groups: New Insights from Transient Absorption Spectroscopy

Photophysical properties of two Re(I) complexes [ReCl(CO)3(R-C6H4-terpy-κ2N)] with remote amine groups, N-methyl-piperazinyl (1) and (2-cyanoethyl)methylamine (2), were investigated. The complexes show strong absorption in the visible region corresponding to metal-to-ligand charge transfer (1MLCT) and intraligand-charge-transfer (1ILCT) transitions. The energy levels of 3MLCT and 3ILCT excited-states, and thus photoluminescence properties of 1 and 2, were found to be strongly affected by the solvent polarity. Compared to the parent chromophore [ReCl(CO)3(C6H5-terpy-κ2N)] (3), both designed complexes show significantly prolonged (by 1–2 orders of magnitude) phosphorescence lifetimes in acetonitrile and dimethylformamide, contrary to their lifetimes in less polar chloroform and tetrahydrofuran, which are comparable to those for 3. The femtosecond transient absorption (fsTA) measurements confirmed the interconversion between the 3MLCT and 3ILCT excited-states in polar solvents. In contrast, the emissive state of 1 and 2 in less polar environments is of predominant 3MLCT nature.

Electrocatalytic CO2 Reduction by [Re(CO)3Cl(3-(pyridin-2-yl)-5-phenyl-1,2,4-triazole)] and [Re(CO)3Cl(3-(2-pyridyl)-1,2,4-triazole)]

The exploration of novel electrocatalysts for CO₂ reduction is necessary to overcome global warming and the depletion of fossil fuels. In the current study, the electrocatalytic CO₂ reduction of [Re(CO)₃Cl(N-N)], where N-N represents 3-(2-pyridyl)-1,2,4-triazole (Hpy), 3-(pyridin-2-yl)-5-phenyl-l,2,4-triazole (Hph), and 2,2'-bipyridine-4,4' dicarboxylic acidic (bpy-COOH) ligands, was investigated. In CO₂-saturated electrolytes, cyclic voltammograms showed an enhancement of the current at the second reduction wave for all complexes. In the presence of triethanolamine (TEOA), the currents of Re(Hpy), Re(Hph), and Re(bpy-COOH) enhanced significantly by approximately 4-, 2-, and 5-fold at peak potentials of -1.60, -150, and -1.69 V_Ag/Ag+, respectively (in comparison to without TEOA). The reduction potential of Re(Hph) was less negative than those of Re(Hpy) and Re(COOH), which was suggested to cause its least efficiency for CO₂ reduction. Chronoamperometry measurements showed the stability of the cathodic current at the second reduction wave for at least 300 s, and Re(COOH) was the most stable in the CO₂-catalyzed reduction. The appearance and disappearance of the absorption band in the UV/vis spectra indicated the reaction of the catalyst with molecular CO₂ and its conversion to new species, which were proposed to be Re-DMF ⁺ and Re-TEOA and were supposed to react with CO₂ molecules. The CO₂ molecules were claimed to be captured and inserted into the oxygen bond of Re-TEOA, resulting in the enhancement of the CO₂ reduction efficiency. The results indicate a new way of using these complexes in electrocatalytic CO₂ reduction.

Understanding the Role of Inter- and Intramolecular Promoters in Electro- and Photochemical CO2 Reduction Using Mn, Re, and Ru Catalysts

Recycling of carbon dioxide to fuels and chemicals is a promising strategy for renewable energy storage. Carbon dioxide conversion can be achieved by (i) artificial photosynthesis using photoinduced electrons; (ii) electrolysis using electricity produced by photovoltaics; and (iii) thermal CO₂ hydrogenation using renewable H₂. The focus of our group's research is on molecular catalysts, in particular coordination complexes of transition metals (e.g., Mn, Re, and Ru), which offer versatile platforms for mechanistic studies of photo- and electrochemical CO₂ reduction. The interactions of catalytic intermediates with Lewis or Brønsted acids, hydrogen-bonding moieties, solvents, cations, etc., that function as promoters or cofactors have become increasingly important for efficient catalysis. These interactions may have dramatic effects on selectivity and rates by stabilizing intermediates or lowering transition state barriers, but they are difficult to elucidate and challenging to predict. We have been carrying out experimental and theoretical studies of CO₂ reduction using molecular catalysts toward addressing mechanisms of efficient CO₂ reduction systems with emphasis on those containing intramolecular (or pendent) and intermolecular (solution phase) additives. This Account describes the identification of reaction intermediates produced during CO₂ reduction in the presence of triethanolamine or ionic liquids, the benefits of hydrogen-bonding interactions among intermediates or cofactors, and the complications of pendent phenolic donors/phenoxide bases under electrochemical conditions.Triethanolamine (TEOA) is a common sacrificial electron donor for photosensitizer excited state reductive quenching and has a long history of use in photocatalytic CO₂ reduction. It also functions as a Brønsted base in conjunction with more potent sacrificial electron donors, such as 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH). Deprotonation of the BIH^•+ cation radical promotes irreversible photoinduced electron transfer by preventing charge recombination. Despite its wide use, most research to date has not considered the broader reactions of TEOA, including its direct interaction with CO₂ or its influence on catalytic intermediates. We found that in acetonitrile, TEOA captures CO₂ in the form of a zwitterionic adduct without any metal catalyst. In the presence of ruthenium carbonyl catalysts bearing α-diimine ligands, it participates in metal hydride formation, accelerates hydride transfer to CO₂ to form the bound formate intermediate, and assists in the dissociation of formate anion from the catalyst ( J. Am. Chem. Soc. 2020, 142, 2413-2428).Hydrogen bonding and acid/base promoters are understood to interact with key catalytic intermediates, such as the metallocarboxylate or metallocarboxylic acid during CO₂ reduction. The former is a high energy species, and hydrogen-bonding or Lewis acid-stabilization are beneficial. We have found that imidazolium-based ionic liquid cations can stabilize the doubly reduced form of the [ReCl(bpy)(CO)₃] (bpy = 2,2'-bipyridine) electrocatalyst through both hydrogen-bonding and π-π interactions, resulting in CO₂ reduction occurring at a more positive potential with a higher catalytic current ( J. Phys. Chem. Lett. 2014, 5, 2033-2038). Hydrogen bonding interactions between Lewis basic methoxy groups in the second coordination sphere of a Mn-based catalyst and the OH group of the Mn-COOH intermediate in the presence of a Brønsted acid were also found to promote C-(OH) bond cleavage, enabling access to a low-energy protonation-first pathway for CO₂ reduction ( J. Am. Chem. Soc. 2017, 139, 2604-2618).The kinetics of forming the metallocarboxylic acid can be enhanced by internal acids, and its proton-induced C-OH bond cleavage to the metallocarbonyl and H₂O is often the rate-limiting step. Therefore, proton movement organized by pendent hydrogen-bonding networks may also accelerate this step. In contrast, during electrolysis, OH groups in the second coordination sphere are deprotonated to the oxyanions, which deter catalytic CO₂ reduction by directly binding CO₂ to form the carbonate or by making an M-O bond in competition with CO₂ binding ( Inorg. Chem. 2016, 55, 4582-4594). Our results emphasize that detailed mechanistic research is critical in discovering the design principles for improved catalysts.

Electrochemical CO2 Reduction Catalyzed by Binuclear LRe2(CO)6Cl2 and LMn2(CO)6Br2 Complexes with an Internal Proton Source

The synthesis of certain commodity chemicals, e.g., methanol and acetic acid, relies on CO, which is currently mainly produced by the combustion of carbon or natural gas. Photo- or electrochemical conversion of atmospheric CO₂ to CO represents an attractive alternative strategy as this approach is carbon-neutral. Such photo- or electrochemically formed CO can also be used in the Fischer-Tropsch process forming liquid hydrocarbons for energy storage applications. The multiple electroreduction of CO₂ is preferably coupled with proton transfer steps as this requires less energy than the single outer-sphere 1e^- reduction of CO₂.In 1984 and 2011, it was shown that [(L^bpy)Re(CO)₃Cl] (1) and [(L^bpy)Mn(CO)₃Br] (2), respectively, mediate the electrochemical 2e^-/2H⁺ reduction of CO₂ forming CO and water (L^bpy = 2,2'-bipyridine). Since proton management is crucial for catalysis, recently the impact of internal proton sources close to the axial position in such complexes has been investigated. However, binuclear complexes have been used rarely as mediators although it has been shown very early for 1 that electron management is also important: the 2e^-/2H⁺ reduction pathway with 1 exhibits a higher reaction rate than going via the singly reduced species, though the pathway requires a higher overpotential. In this Account, we focus on recent developments of binuclear LMn₂(CO)₆ and LRe₂(CO)₆ mediators with an internal phenol group in the electroreduction of CO₂. In contrast to mononuclear derivatives, for which the impact of the internal proton source on catalysis is very diverse, we always observed a higher reaction rate and for the Mn complexes also a lower overpotential with the binuclear complexes compared to the mononuclear variants. Spectroscopic, electrochemical, and computational studies on the mono- and binuclear complexes shed light on their reactivity under reductive conditions, elucidated the structure of reduced species, unraveled the kinetics for catalytically productive and unproductive (side) reactions, and allowed us to derive some hypothesis on the CO₂ reduction mechanism. Finally, I emphasize that the electrohydrogenation of the polar double bonds by the binuclear complex LMn₂(CO)₆ with a central phenol unit is not restricted to CO₂ but is also applicable to organic compounds with C═O bonds.

Mechanistic Study of Tungsten Bipyridyl Tetracarbonyl Electrocatalysts for CO2 Fixation: Exploring the Roles of Explicit Proton Sources and Substituent Effects

Tungsten bipyridyl tetracarbonyl complexes were shown to reduce CO2 to CO in acetonitrile [Chem. Sci., 2014, 5, 1894-1900]. Here, we employ density functional theory (DFT) calculations to investigate the electronic structure and reactivity of a series of tungsten electrocatalysts, [W(bpy-R)(CO)4] (where R = H, CH3, tBu, OCH3, CF3, and CN), for the CO2 reduction reaction (CO2RR). Our proposed mechanism suggests that initial reduction of the starting material by two electrons is required to access the active catalyst upon CO dissociation, which is slightly endergonic, consistent with the slow product release observed experimentally. The doubly reduced species, which has a closed-shell singlet ground state, can bind CO2 via an η2-CO2 binding mode to yield the metallocarboxylate intermediate. Based on the energy span model, CO2 addition is the TOF-determining transition state (TDTS) in the presence of water as the proton source. Different substituents at the 4,4'-positions of the bipyridine ligand in [W(bpy-R)(CO)4] (R = H, CH3, tBu, OCH3, CF3, and CN) were considered to comprehend the substituent effects for CO2RR. DFT results show that electron-withdrawing substituents, such as CN and CF3, do not yield efficient CO2 reduction catalysts due to the necessity of forming high energy intermediates for the protonation steps, resulting in low TOFs and high overpotentials. Among electron-donating groups, the parent compound and tert-butyl substituted complex are the most active catalysts for CO2RR due to higher TOFs at low overpotentials. Overall, based on the energy span model and theoretical Tafel plots, our computational approach provides quantitative information for designing CO2 reduction electrocatalysts.

Electrocatalyst decomposition pathways: torsional strain in a second sphere proton relay shuts off CO2RR in a Re(2,2′-bipyridyl)(CO)3X type electrocatalyst

Group 7 tris(carbonyl) bipyridine complexes have been well explored as important CO2 reduction reaction (CO2RR) electrocatalysts and now represent an excellent platform for catalyst design.

Promoting photocatalytic CO2 reduction through facile electronic modification of N-annulated perylene diimide rhenium bipyridine dyads

The development of CO₂ conversion catalysts has become paramount in the effort to close the carbon loop. Herein, we report the synthesis, characterization, and photocatalytic CO₂ reduction performance for a series of N-annulated perylene diimide (NPDI) tethered Re(bpy) supramolecular dyads [Re(bpy-C2-NPDI-R)], where R = –H, –Br, –CN, –NO₂, –OPh, –NH₂, or pyrrolidine (–NR₂). The optoelectronic properties of these Re(bpy-C2-NPDI-R) dyads were heavily influenced by the nature of the R-group, resulting in significant differences in photocatalytic CO₂ reduction performance. Although some R-groups (i.e. –Br and –OPh) did not influence the performance of CO₂ photocatalysis (relative to –H; TON_co ∼60), the use of an electron-withdrawing –CN was found to completely deactivate the catalyst (TON_co < 1) while the use of an electron-donating –NH₂ improved CO₂ photocatalysis four-fold (TON_co = 234). Despite being the strongest EWG, the –NO₂ derivative exhibited good photocatalytic CO₂ reduction abilities (TON_co = 137). Using a combination of CV and UV-vis-nIR SEC, it was elucidated that the –NO₂ derivative undergoes an in situ transformation to –NH₂ under reducing conditions, thereby generating a more active catalyst that would account for the unexpected activity. A photocatalytic CO₂ mechanism was proposed for these Re(bpy-C2-NPDI-R) dyads (based on molecular orbital descriptions), where it is rationalized that the photoexcitation pathway, as well as the electronic driving-force for NPDI²⁻ to Re(bpy) electron-transfer both significantly influence photocatalytic CO₂ reduction. These results help provide rational design principles for the future development of related supramolecular dyads.

Seven N-annulated perylene diimide tethered rhenium (2,2′-bipyridine) supramolecular dyads are evaluated as photocatalysts for the reduction for carbon dioxide, highlighting the importance of photoexcitation pathway and electronic driving-force.

A Rhenium Single-Atom Catalyst for the Electrocatalytic Oxygen Reduction Reaction

Single atom catalysts (SACs) have received a great deal of attention due to their extremely high active site utilization and superior activities. The exploration of metal SACs has been carried out by screening the elemental periodic table from first-row to second-row, and even third-row transition metals. However, Re SACs have not been reported, even if Re metal sites also play essential roles in catalyzing many important reactions. The construction of Re SACs may maximize Re catalytic sites and provide new Re active sites for higher activity. Herein, we used 1,10-phenanthroline to complex Re cations on carbon black, followed by heat treatment to obtain Re SAC. The Re SAC exhibited an oxygen reduction reaction (ORR) half-wave potential of 0.72 V versus reversible hydrogen electrode (RHE) in 0.1 M KOH, superior to Re nanoparticles catalyst (0.67 V vs. RHE). Re SAC exhibited better stability at 0.5 V vs. RHE than Pt/C, showing potential as a new electrocatalyst for ORR.

Effects of Protonation State on Electrocatalytic CO2 Reduction by a Cobalt Aminopyridine Macrocyclic Complex

A critical component in the reduction of CO₂ to CO and H₂O is the delivery of 2 equiv of protons and electrons to the CO₂ molecule. The timing and sequencing of these proton and electron transfer steps are essential factors in directing the activity and selectivity for catalytic CO₂ reduction. In previous studies, we have reported a series of macrocyclic aminopyridine cobalt complexes capable of reducing CO₂ to CO with high faradaic efficiencies. Kinetic investigations reveal a relationship between the observed rate constant (k_obs) and the number of pendant amine hydrogen bond donors minus one, suggesting the presence of a deprotonated active catalytic state. Herein, we investigate the feasibility of these proposed deprotonated complexes toward CO₂ reduction. Two deprotonated derivatives, Co(L^4-) and Co(L^2-), of the tetraamino macrocycle Co(L) were independently synthesized and structurally characterized revealing extensive delocalization of the negative charge upon deprotonation. ¹H nuclear magnetic resonance spectroscopy and ultraviolet-visible titration studies confirm that under catalytic conditions, the active form of the catalyst gradually becomes deprotonated, supporting thus the n_donor - 1 relationship with k_obs. Electrochemical studies of Co(L^4-) reveal that this deprotonated analogue is competent for electrocatalysis upon addition of an exogenous weak acid source, such as 2,2,2-trifluoroethanol, resulting in faradaic efficiencies for CO₂-to-CO conversion identical to those observed with the fully protonated derivative (>98%).

Electrochemical Degradation of a Dicationic Rhenium Complex via Hoffman-Type Elimination

Electrocatalytic reduction of carbon dioxide (CO₂) by transition-metal catalysts is an attractive means for storing renewably sourced electricity in chemical bonds. Metal coordination compounds represent highly tunable platforms ideal for studying the fundamental stepwise transformations of CO₂ into its reduced products. However, metal complexes can decompose upon extended electrolysis and form chemically distinct molecular species or, in some cases, catalytically active electrode deposits. Deciphering the degradative pathways is important for understanding the nature of the active catalyst and designing robust metal complexes for small-molecule activation. Herein, we present a new dicationic rhenium bipyridyl complex capable of multielectron ligand-centered reductions electrochemically. Our in-depth experimental and computational study provides mechanistic insight into an unusual reductively induced Hoffman-type elimination. We identify benzylic tertiary ammonium groups as an electrolytically susceptible moiety and propose key intermediates in the degradative pathway. This investigation highlights the complex interplay between the ligand and metal ion and will guide the future design of metal-organic catalysts.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

A bio-inspired mononuclear manganese catalyst for high-rate electrochemical hydrogen production

[FeFe]-hydrogenase (H₂ase) catalyzes hydrogen evolution reactions (HERs), with an excellent performance that rivals that of platinum, the active site of which is built with crucial structural features required for efficient H-H bond formation. Herein, we report a mononuclear manganese complex (1) that contains a square pyramid coordination sphere and an intramolecular aniline as the proton relay, consistent with the crucial features of the active site in H₂ase. Benefitting from these features, complex 1 electrocatalyzes the HER with a turnover frequency (TOF) exceeding 10 000 s^-1 at -1.45 V (versus the ferrocenium/ferrocene couple) using anilinium tetrafluoroborate as a proton source. This work provides the first Mn-based functional model of H₂ase, serving as a new paradigm for a high performance, low cost, environmentally benign hydrogen production electrocatalyst.

Methane Generation from CO2 with a Molecular Rhenium Catalyst

The atomic-level tunability of molecular structures is a compelling reason to develop homogeneous catalysts for challenging reactions such as the electrochemical reduction of carbon dioxide to valuable C₁-C_n products. Of particular interest is methane, the largest component of natural gas. Herein, we report a series of three isomeric rhenium tricarbonyl complexes coordinated by the asymmetric diimine ligands 2-(isoquinolin-1-yl)-4,5-dihydrooxazole (quin-1-oxa), 2-(quinolin-2-yl)-4,5-dihydrooxazole (quin-2-oxa), and 2-(isoquinolin-3-yl)-4,5-dihydrooxazole (quin-3-oxa) that catalyze the reduction of CO₂ to carbon monoxide and methane, albeit the latter with a low efficiency. To our knowledge, these complexes are the first examples of rhenium(I) catalysts capable of converting carbon dioxide into methane. Re(quin-1-oxa)(CO)₃Cl (1), Re(quin-2-oxa)(CO)₃Cl (2), and Re(quin-3-oxa)(CO)₃Cl (3) were characterized and studied using a variety of electrochemical and spectroscopic techniques. In bulk electrolysis experiments, the three complexes reduce CO₂ to CO and CH₄. When the controlled-potential electrolysis experiments are performed at -2.5 V (vs Fc^+/0) and in the presence of the Brønsted acid 2,2,2-trifluoroethanol, methane is produced with turnover numbers that range from 1.3 to 1.8. Isotope labeling experiments using ¹³CO₂ atmosphere produce ¹³CH₄ (m/z = 17) confirming that methane originates from CO₂ reduction. Theoretical calculations are performed to investigate the mechanistic aspects of the 8e^-/8H⁺ reduction of CO₂ to CH₄. A ligand-assisted pathway is proposed to be an efficient pathway in the formation of CH₄. Delocalization of the electron density on the (iso)quinoline moiety upon reduction stabilizes the key carbonyl intermediate leading to additional reactivity of this ligand. These results should aid the development of more robust catalytic systems that produce CH₄ from CO₂.

Electro- and Photochemical Reduction of CO2 by Molecular Manganese Catalysts: Exploring the Positional Effect of Second-Sphere Hydrogen-Bond Donors

A series of molecular Mn catalysts featuring aniline groups in the second-coordination sphere has been developed for electrochemical and photochemical CO₂ reduction. The arylamine moieties were installed at the 6 position of 2,2'-bipyridine (bpy) to generate a family of isomers in which the primary amine is located at the ortho- (1-Mn), meta- (2-Mn), or para-site (3-Mn) of the aniline ring. The proximity of the second-sphere functionality to the active site is a critical factor in determining catalytic performance. Catalyst 1-Mn, possessing the shortest distance between the amine and the active site, significantly outperformed the rest of the series and exhibited a 9-fold improvement in turnover frequency relative to parent catalyst Mn(bpy)(CO)₃ Br (901 vs. 102 s^-1 , respectively) at 150 mV lower overpotential. The electrocatalysts operated with high faradaic efficiencies (≥70 %) for CO evolution using trifluoroethanol as a proton source. Notably, under photocatalytic conditions, a concentration-dependent shift in product selectivity from CO (at high [catalyst]) to HCO₂ H (at low [catalyst]) was observed with turnover numbers up to 4760 for formic acid and high selectivities for reduced carbon products.

Synthesis, characterization, and electrocatalytic activity of bis(pyridylimino)isoindoline Cu(ii) and Ni(ii) complexes

Similar structure observed between Cu(ii) and Ni(ii) based bis(pyridylimino)isoindole complexes, yet greatly different levels of catalytic activity.

Mobility of Lewis acids within the secondary coordination sphere: toward a model for cooperative substrate binding

Distance dependence of appended Lewis acids in N2H4 binding and deprotonation was evaluated within a series of zinc complexes. Variation of spacer-length to a tethered trialkylborane Lewis acid revealed distinct preferences for binding and stabilization of the resulting deprotonated N2H3- unit.

Highly selective and active Cu-In2O3/C nanocomposite for electrocatalytic reduction of CO2 to CO

The Cu-In₂O₃/C nanocomposite was prepared by a simple solid-phase reduction method. The introduction of In₂O₃ into Cu/C to form the Cu-In₂O₃/C nanocomposite evidently enhances the electrocatalytic activity for the selective reduction of CO₂ to CO. Specifically, the Cu-In₂O₃/C nanocomposite exhibits higher Faraday efficiency (FE = 86.7%) at -0.48 V vs. the reversible hydrogen electrode (RHE) in the electrocatalytic reduction of CO₂ to CO and larger current densities (55 mA cm^-2) under a low overpotential (-1.08 V vs. RHE). These indicate its superior performance over many of the reported Cu-based catalysts [1-4]. It was also found that by rationally adjusting the applied potential, tunable syngas can be formed, which can be used to synthesize formic acid, methyl ether, methanol, synthetic fuels, or other bulk chemicals through appropriate industrial processes. Furthermore, the Cu-In₂O₃/C nanocomposite maintains good stability in the electrocatalytic reduction of CO₂. This work demonstrates a novel strategy to convert CO₂ into desired products with high energy efficiency and large current density under low overpotential by the rational designing of non-precious metal catalysts.

Luminescent Rhenium(I)tricarbonyl Complexes Containing Different Pyrazoles and Their Successive Deprotonation Products: CO2 Reduction Electrocatalysts

Cationic fac-[Re(CO)₃(pz*H)(pypzH)]OTf (pz*H = pyrazole, pzH; 3,5-dimethylpyrazole, dmpzH; indazole, indzH; 3-(2-pyridyl)pyrazole, pypzH) were obtained from fac-[ReBr(CO)₃(pypzH)] by halide abstraction with AgOTf and subsequent addition of the corresponding pyrazole. Successive deprotonation with Na₂CO₃ and NaOH gave neutral fac-[Re(CO)₃(pz*H)(pypz)] and anionic Na{fac-[Re(CO)₃(pz*)(pypz)]} complexes, respectively. Cationic fac-[Re(CO)₃(pz*H)(pypzH)]OTf, neutral complexes fac-[Re(CO)₃(pz*H)(pypz)], and fac-[Re(CO)₃(pypz)₂Na] were subjected to photophysical and electrochemical studies. They exhibit phosphorescent decays from a prevalently ³MLCT excited state with quantum yields (Φ) in the range between 0.03 and 0.58 and long lifetimes (τ from 220 to 869 ns). The electrochemical behavior in Ar atmosphere of cationic and neutral complexes indicates that the oxidation processes assigned to Re^I → Re^II occurs at lower potentials for the neutral complex compared to cationic complex. The reduction processes occur at the ligands and do not depend on the charge of the complexes. The electrochemical behavior in CO₂ saturated media is consistent with CO₂ electrocatalyzed reduction, where the values of the catalytic activity [i_cat(CO₂)/i_cat(Ar)] ranged from 2.7 to 11.5 (compared to 8.1 for fac-[Re(CO)₃Cl(bipy)] studied as a reference). Controlled potential electrolysis for the pyrazole cationic (3a) and neutral (4a) complexes after 1 h affords CO in faraday yields of 61 and 89%, respectively. These values are higher for indazole complexes and may be related to the acidity of the coordinated pyrazole.