UiO-66-NH2 Metal-Organic Frameworks with Embedded MoS2 Nanoflakes for Visible-Light-Mediated H2 and O2 Evolution

Visible-Light Photocatalytic Degradation Efficiency of Tetracycline and Rhodamine B Using a Double Z-Scheme Heterojunction Catalyst of UiO-66-NH2/BiOCl/Bi2S3

BiOCl is a promising photocatalyst, but due to its weak visible light absorption capacity and low photogenerated electron-hole pair separation rate, its practical application is limited to a certain extent. In this study, a novel double Z-scheme heterojunction UiO-66-NH2/BiOCl/Bi2S3 catalyst was constructed to broaden the visible light response range and promote high photogenerated hole-electron separation of BiOCl. Its photocatalytic performance is evaluated by dissociating tetracycline (TC) and rhodamine B (RhB) in visible light. The optimal proportion of UiO-66-NH2/BiOCl/Bi2S3 hybrids exhibits the best degradation efficiency of visible light illumination (∼93% in 120 min for TC and ∼98% in 60 min for RhB). The synergistic effect of a large visible light response range and the Z-scheme charge transfer mechanism ensure the excellent visible photocatalytic activity of UiO-66-NH2/BiOCl/Bi2S3. It is proven that h+ and •O2- are the main active substances in the photocatalysis process by active substance capture experiments and electron spin resonance tests. The intermediates and degradation processes are analyzed by high-performance liquid chromatography-mass spectrometry. This study proves that the new UiO-66-NH2/BiOCl/Bi2S3 photocatalyst has great application potential in the field of water pollution degradation and will provide a new idea for the optimization of BiOCl.

Enhanced performance of a Na3.5Co4[Bi2Co2W19.75O70(H2O)6]/porous graphitic carbon nitride heterojunction based photocatalyst realized by the addition of copper sulfide nanoparticles

Photocatalytic hydrogen (H2) evolution can effectively solve the global energy problem, in which the key factor is the synthesis of efficient photocatalytic materials. In this study, we successfully synthesized a novel photocatalyst, BiWCo/CuS/PGCN, by functionalizing porous graphitic carbon nitride (PGCN) with sandwich-type polyoxometalate Na3.5Co4[Bi2Co2W19.75O70(H2O)6]·39.5H2O (BiWCo) and introducing copper sulfide (CuS) nanoparticles as a cocatalyst. This approach was aimed at enhancing the built inner electric field between interfaces, resulting in a significant improvement in photocatalytic H2 evolution performance. This research adopts a step-by-step method to synthesize BiWCo/CuS/PGCN composites with p-n heterojunctions, which has high visible light absorption and a synergistic effect of multiple elements. PGCN with a high specific surface area contributes to the uniform distribution of active sites. In addition, the nano-CuS cocatalyst provides abundant active sites and more electron transfer pathways for photocatalysis. Therefore, the H2 production efficiency of BiWCo/CuS/PGCN is 6.3 times that of PGCN, 4.5 times that of BiWCo and 2.5 times that of BiWCo/PGCN under visible light. The H2 production rate of BiWCo/CuS/PGCN reaches 3477.58 μmol g-1 h-1. At the same time, the ternary photocatalyst shows high stability after 30 hours and 5 cycles. This work demonstrates that BiWCo/CuS/PGCN has good application prospects in H2 evolution, and provides a new strategy for the design of efficient ternary photocatalytic materials.

Twinned crystal Cd0.9Zn0.1S/MoO3 nanorod S-scheme heterojunctions as promising photocatalysts for efficient hydrogen evolution

Leveraging solar energy through photocatalytic hydrogen production from water stands out as one of the most promising approaches to address the energy and environmental challenges. The choice of catalyst profoundly influences the outcomes of photocatalytic reactions, and constructing heterojunctions has emerged as a widely applied strategy to overcome the limitations associated with single-phase photocatalysts. MoO3, renowned for its high chemical stability, encounters issues such as low photocatalytic efficiency and fast recombination of photogenerated electrons and holes. To tackle these challenges, the morphology of MoO3 has been controlled to form nanorods, simultaneously suppressing the aggregation of the catalyst and increasing the number of surface-active sites. Moreover, to facilitate the separation of photogenerated charge carriers, Cd0.9Zn0.1S nanoparticles with a twin crystal structure are deposited on the surface of MoO3, establishing an S-scheme heterojunction. Experimental findings demonstrate that the synergistic effects arising from the well-defined morphology and interface interactions extend the absorption range to visible light response, improve charge transfer activity, and prolong the lifetime of charge carriers. Consequently, Cd0.9Zn0.1S/MoO3 S-scheme heterojunctions exhibit outstanding photocatalytic hydrogen production performance (3909.79 μmol g-1 h-1) under visible light irradiation, surpassing that of MoO3 by nearly nine fold.

Metal-Organic Frameworks-Derived Nanocarbon Materials and Nanometal Oxides for Photocatalytic Applications

Harnessing low-density solar energy and converting it into high-density chemical energy through photocatalysis has emerged as a promising avenue for the production of chemicals and remediation of environmental pollution, which contributes to alleviating the overreliance on fossil fuels. In recent years, metal-organic frameworks (MOFs) have gained widespread application in the field of photocatalysis due to their photostability, tunable structures, and responsiveness in the visible light range. However, most MOFs exhibit relatively low response to light, limiting their practical applications. MOFs-derived nanomaterials not only retain the inherent advantages of pristine MOFs but also show enhanced light adsorption and responsiveness. This review categorizes and summarizes MOFs-derived nanomaterials, including nanocarbons and nanometal oxides, providing representative examples for the synthetic strategies of each category. Subsequently, the recent research progress on MOFs-derived materials in photocatalytic applications are systematically introduced, specifically in the areas of photocatalytic water splitting to H2, photocatalytic CO2 reduction, and photocatalytic water treatment. The corresponding mechanisms involved in each photocatalytic reaction are elaborated in detail. Finally, the review discusses the challenges and further directions faced by MOFs-derived nanomaterials in the field of photocatalysis, highlighting their potential role in advancing sustainable energy production and environmental remediation.

A novel synergistic enzyme-antibiotic therapy with immobilization of mycobacteriophage Lysin B enzyme onto Rif@UiO-66 nanocomposite for enhanced inhaled anti-TB therapy; Nanoenzybiotics approach

The emergence of antibiotic-resistant and phage-resistant strains of Mycobacterium tuberculosis (M. tuberculosis) necessitates improving new therapeutic plans. The objective of the current work was to ensure the effectiveness of rifampicin and the mycobacteriophage LysB D29 (LysB)enzyme in the treatment of multi-drug resistant tuberculosis (MDR-TB) infection, where new and safe metal-organic framework (MOF) nanoparticles were used in combination. UiO-66 nanoparticles were synthesized under mild conditions in which the antimycobacterial agent (rifampicin) was loaded (Rif@UiO-66) and LysB D29 enzyme immobilized onto Rif@UiO-66, which were further characterized. Subsequently, the antibacterial activity of different ratios of Rif@UiO-66 and LysB/Rif@uio-66 against the nonpathogenic tuberculosis model Mycobacterium smegmatis (M. smegmatis) was evaluated by minimum inhibitory concentration (MIC) tests. Impressively, the MIC of LysB/Rif@uio-66 was 16-fold lower than that of pure rifampicin. In vitro and in vivo toxicity studies proved that LysB/Rif@UiO-66 is a highly biocompatible therapy for pulmonary infection. A biodistribution assay showed that LysB/Rif@UiO-66 showed a 5.31-fold higher drug concentration in the lungs than free rifampicin. A synergistic interaction between UiO-66, rifampicin and the mycobacteriophage lysB D29 enzyme was shown in the computational method (docking). Therefore, all results indicated that the LysB/Rif@UiO-66 nanocomposite exhibited promising innovative enzyme-antibiotic therapy for tuberculosis treatment.

A Visible Light-Driven α-MnO2/UiO-66-NH2 S-Scheme Photocatalyst toward Ameliorated Oxy-TCH Degradation and H2 Evolution

Photocatalytic hydrogen production and pollutant degradation using a heterogeneous photocatalyst remains an alternative route for mitigating the impending pollution and energy crisis. Hence, the development of cost-effective and environmentally friendly semiconducting materials with high solar light captivation nature is imperative. To overcome this challenge, α-MnO2 nanorod (NR)-modified MOF UiO-66-NH2 (UNH) was prepared via a facile solvothermal method, which is efficient toward H2 evolution and oxy-tetracycline hydrochloride (O-TCH) degradation. The field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HR-TEM) results of the α-MnO2@UNH (MnU) hybrid reveals its nanorod embedded in MOF matrix, and the X-ray photoelectron spectroscopy (XPS) result confirms the interaction of UNH moiety with α-MnO2 NRs. Additionally, the outstanding separation of photogenerated excitons and the charge-transfer efficacy are further validated by photoluminescence (PL), time-resolved photoluminescence (TRPL), electrochemical impedance spectroscopy (EIS), and transient photocurrent analysis, which are the key causes for photoactivity augmentation in the MnU composites. The MnU-2 composite shows a superior O-TCH degradation efficiency of 93.23% and an excellent H2 production rate of about 410.6 μmol h-1 upon light irradiation. This study provides significant evidence in favor of the suggested mediator-free S-scheme-adapted charge migration path, and it effectively explains the enhanced exciton separation leading to extraordinary catalytic efficiency of the proposed composite.

Augmented photocatalysis induced by 1T-MoS2 bridged 2D/2D MgIn2S4@1T/2H-MoS2 Z-scheme heterojunction: mechanistic insights into H2O2 and H2 evolution

In the realm of composite photocatalysts, the fusion of the co-catalyst effect with interfacial engineering is recognized as a potent strategy for facilitating the segregation and migration of photo-induced charge carriers. Herein, an innovative mediator-based Z-scheme hybrid, i.e. MIS@1T/2H-MoS2, has been well designed by pairing MIS with 1T/2H-MoS2via a facile hydrothermal strategy as a competent photocatalyst for H2O2 and H2 generation. The co-catalyst, i.e. metallic 1T-phase bridging between semiconducting 2H-MoS2 and MIS, serves as a solid state electron mediator in the heterostructure. Morphological findings revealed the growth of 1T/2H-MoS2 nanoflowers over MIS microflowers, verifying the close interaction between MIS and 1T/2H-MoS2. By virtue of accelerated e-/h+ pair separation and migration efficiency along with a proliferated density of active sites, the MMoS2-30 photocatalyst yields an optimum H2O2 of 35 μmol h-1 and H2 of 370 μmol h-1 (ACE of 5.9%), which is 3 and 2.7 fold higher than pristine MIS. This obvious enhancement can be attributed to photoluminescence and electrochemical aspects that substantiate the diminished charge transfer resistance along with improved charge carrier separation, representing a good example of a noble metal-free photocatalyst. The proposed Z-scheme charge transfer mechanism is aided by time-resolved photoluminescence (TRPL), XPS, radical trapping experiments, and EPR analysis. Overall, this endeavour provides advanced insights into the architecture of noble metal-free Z-scheme heterostructures, offering promising prospects in photocatalytic applications.

Mixed valence copper oxide composites derived from metal-organic frameworks for efficient visible light fuel denitrification

The construction of heterojunctions has been used to optimize photocatalyst fuel denitrification. In this work, HKUST-1(Cu) was used as a sacrificial template to synthesize a composite material CuxO (CuO/Cu2O) that retains the original MOF framework for photocatalytic fuel denitrification by calcination at different temperatures. By adjusting the temperature, the content of CuO/Cu2O can be changed to control the performance and structure of CuxO-T effectively. The results show that CuxO-300 has the best photocatalytic performance, and its denitrification rate reaches 81% after 4 hours of visible light (≥420 nm) irradiation. Through the experimental analysis of pyridine's infrared and XPS spectra, we found that calcination produces CuxO-T mixed-valence metal oxide, which can create more exposed Lewis acid sites in the HKUST-1(Cu) framework. This leads to improved pyridine adsorption capabilities. The mixed-valence metal oxide forms a type II semiconductor heterojunction, which accelerates carrier separation and promotes photocatalytic activity for pyridine denitrification.

A Chiral Nanocomplex for Multitarget Therapy to Alleviate Neuropathology and Rescue Alzheimer's Cognitive Deficits

Alzheimer's disease (AD) is a severe neurodegenerative condition characterized by inflammation, beta-amyloid (Aβ) plaques, and neurodegeneration, which currently lack effective treatments. Chiral nanomaterials have emerged as a promising option for treating neurodegenerative disorders due to their high biocompatibility, strong sustained release ability, and specific enantiomer selectivity. The development of a stimulus-responsive chiral nanomaterial, UiO-66-NH2 @l-MoS2 QDs@PA-Ni (MSP-U), for the treatment of AD is reported. MSP-U is found to stimulate neural stem cell (NSCs) differentiation, promote in situ hydrogen (H2 ) production, and clear Aβ plaques. l-MoS2 QDs modified with l-Cysteine (l-Cys) effectively enhance the differentiation of NSCs into neurons through circularly polarized near-infrared radiation. Doped-phytic acid nickel (PA-Ni) improves the activity of l-MoS2 QDs in scavenging reactive oxygen species at the lesion site via photocatalytic H2 production. Loading l-MoS2 QDs with UiO-66 type metal oxide suppresses electron-hole recombination effect, thereby achieving rapid charge separation and improving transport of photogenerated electrons, leading to significantly improved H2 production efficiency. The photothermal effect of MSP-U also clears the generated Aβ plaques. In vivo evaluations show that MSP-U improves spatial cognition and memory, suggesting a promising potential candidate for the treatment of AD using chiral nanomaterials.

Rational design of MOF@COF composites with multi-site functional groups for enhanced elimination of U(VI) from aqueous solution

Both environment and human beings were menaced by the widespread application of radioactive uranium, high-performance and effective elimination of uranium from wastewater is of important meaning for development of environmental sustainability in the future. In this study, the water-stable MOF material and the highly crystalline COF were compounded by a mild hydrothermal strategy, which achieved efficient removal of U(VI) through the synergistic effect. The composites showed the characteristics of both COFs and MOFs, which will possess higher stability, larger surface area and faster adsorption efficiency that cannot be carried out by a single component. Batch experiments and characterizations (SEM, TEM, XRD, FT-IR, BET, XPS, etc.) indicated that UiO-66-NH2@LZU1 had more stable and multi-layer pore structure and rich active functional groups. The Langmuir model and the pseudo-second-order kinetics fitting was more suitable for the U(VI) elimination process. The greatest uranium adsorbing capacity of UiO-66-NH2@LZU1 (180.4 mg g-1) was observed to exceed the UiO-66-NH2 (108.8 mg g-1) and COF-LZU1 (65.8 mg g-1), which reached the excellent hybrid effects. Furthermore, FT-IR and XPS analyses confirmed that the most nitrogen-containing group from COF-LZU1 and oxygen-containing group of UiO-66-NH2 could be combined with U(VI). In addition, electrostatic interaction was also a mechanism during the removal process. This work displayed that UiO-66-NH2@LZU1 was a prospective hybrid material for radioactive waste remediation. The compound method and application mentioned in this work had provided a theoretical basis for designing and developing multi-functional composite adsorbents, which contributed to the development of new materials for radioactive wastewater treatment technologies.

Construction of UiO-66-NH2 decorated by MoS2 QDs as photocatalyst for rapid and effective visible-light driven Cr(VI) reduction

The photoactive metal-organic frameworks (MOFs) are good candidates for photocatalysts, but the quick electron-hole pairs recombination has greatly restricted the photocatalytic ability of MOFs. To improve the photoactivity of MOFs, MOFs-based composite materials have been extensively studied. Here, we successfully integrated MoS2 quantum dots (QDs) with UiO-66-NH2 for the first time under hydrothermal conditions. The as-prepared MoS2 QDs/UiO-66-NH2 (MS-U) had good visible light response ability (absorption edge at 445 nm), and charge separation and transfer ability, which lays the foundation for the photocatalytic Cr(VI) reduction. Photocatalytic studies revealed that MoS2 QDs-5/UiO-66-NH2 (MS-U-5) had superior Cr(VI) reduction activity than pure MoS2 QDs and UiO-66-NH2. MS-U-5 could remove 98% Cr(VI) at pH= 2 with visible light irradiation for 20 min, which is the fastest visible light driven Cr(VI) reduction rate among the reported MOFs-based composite photocatalysts without the presence of any cocatalysts or scavengers as far as we know. Importantly, MS-U-5 could be reused at least three times. In the end, the possible electron transfer path and mechanism of Cr(VI) reduction was also investigated.

MgIn2S4/UiO-66-NH2 MOF-Based Heterostructure: Visible-Light-Responsive Z-Scheme-Mediated Synergistically Enhanced Photocatalytic Performance toward Hydrogen and Oxygen Evolution

Hydrogen and oxygen evolution via photocatalytic water splitting remains the quintessential alternative to fossil fuels. Photocatalysts must be sufficiently robust, competent, and productive toward harnessing sunlight in order to utilize the solar spectrum for maximal photocatalytic output. Herein, we have fabricated the MgIn₂S₄/UiO-66-NH₂ composite via a facile solvothermal route and have determined its efficacy toward light-induced H₂ and O₂ generation reactions through water splitting with the aid of different sacrificial agents. Initially, the formation of pristine and composite materials was ascertained by PXRD, FTIR, etc. Moreover, with the aid of sophisticated morphological characterization techniques (FESEM and HRTEM), the intricate interaction between MgIn₂S₄ and UiO-66-NH₂ was revealed. Additionally, the XPS studies suggested the effective interaction between the individual components with binding energy shifting suggesting the transfer of electrons from Zr-MOF to MgIn₂S₄. The PL and electrochemical aspects supported the effective photogenerated charge segregation in the prepared composite leading to superior photocatalytic outputs. Amidst the prepared composites of (3, 5, and 7 wt %) MgIn₂S₄/UiO-66-NH₂, the 5 wt % or UM-2 composite displays optimal H₂ and O₂ evolution performances of 493.8 and 258.6 μmol h^-1 (4-fold greater than for pristine MgIn₂S₄ and UiO-66-NH₂), respectively. The nanocomposite's enhanced performance is indeed a consequence of the coadjuvant interaction among pristine UiO-66-NH₂ and MgIn₂S₄ components that transpires via the Z-scheme-mediated charge transfer by enabling facile exciton segregation and channelization. Moreover, the composite inherited the remarkable framework stability of parent Zr-MOF, and the MgIn₂S₄ insertion had a negligible impact on the framework integrity. This work will offer a valuable model for developing robust Zr-MOF-based nanocomposite photocatalysts and evaluating their superior performance toward photocatalytic water redox reactions.

Inner transition metal-modulated metal organic frameworks (IT-MOFs) and their derived nanomaterials: a strategic approach towards stupendous photocatalysis

Photocatalysis, as an amenable and effective process, can be adopted for pollution remediation and to alleviate the ongoing energy crisis. In this case, recently, metal organic frameworks (MOFs) have attracted increasing attention in the field of photocatalysis owning to their unique characteristics including large specific surface area, tuneable pore architecture, mouldable framework composition, tuneable band structure, and exceptional photon absorption tendency complimented with superior anti-recombination of excitons. Among the plethora of frameworks, inner transition metal based-MOFs (IT-MOFs) have started to garner significant traction as photocatalysts due to their distinct characteristics compared to conventional transition metal-based frameworks. Typically, IT-MOFs have the tendency to generate high nuclearity clusters and possess abundant Lewis acidic sites, together with mixed valency, which aids in easily converting redox couples, thereby making them a suitable candidate for various photocatalytic reactions. Therefore, in this contribution, we aim to summarise the excellent photocatalytic performance of IT-MOFs and their composites accompanied by a thorough discussion of their topological changes with a variation in the structure of the metal cluster, fabrication routes, morphological features, and physico-chemical properties together with a brief discussion of computational findings. Moreover, we attempt to explore the scientific understanding of the functionalities of IT-MOFs and their composites with detailed mechanistic pathways for in-depth clarity towards photocatalysis. Furthermore, we present a comprehensive analysis of IT-MOFs for various crucial photocatalytic applications such as H₂/O₂ evolution, organic pollutant degradation, organic transformation, and N₂ and CO₂ reduction. In addition, we discuss the measures employed to enhance their performance with some future directions to address the challenges with IT-MOF-based nanomaterials.

Integrating Ultrasmall Pd NPs into Core-Shell Imidazolate Frameworks for Photocatalytic Hydrogen and MeOH Production

The construction of photoactive units in the proximity of a stable framework support is one of the promising strategies for uplifting photocatalysis. In this work, the ultrasmall Pd NPs implanted onto core-shell (CS) metal organic frameworks (MOFs), i.e., CS@Pd nanoarchitectures with tailored electronic and structural properties are reported. The all-in-one heterogeneous catalyst CS@Pd3 improves the surface functionalities and exhibits an outstanding hydrogen evolution reaction (HER) activity rate of 12.7 mmol g^-1 h^-1, which is 10-folds higher than the pristine frameworks with an apparent quantum efficiency (AQE) of 9.02%. The bifunctional CS@Pd shows intriguing results when subjected to photocatalytic CO₂ reduction with an impressive rate of 71 μmol g^-1 h^-1 of MeOH under visible-light irradiation at ambient conditions. Spectroscopic data reveal efficient charge migrations and an extended lifetime of 2.4 ns, favoring efficient photocatalysis. The microscopic study affirms the formation of well-ordered CS morphology with precise decoration of Pd NPs over the CS networks. The significance of active Pd and Co sites is addressed by congruent charge-transfer kinetics and computational density functional theory calculations of CS@Pd, which validate the experimental findings with their synergistic involvement in improved photocatalytic activity. This present work provides a facile and competent avenue for the systematic construction of MOF-based CS heterostructures with active Pd NPs.

Preparation of core-shell MOF@MOF nanoparticle as matrix for the analysis of rhubarb anthraquinones in plasma by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A core-shell structure UiO-66-(OH)₂@UiO-66-NH₂ (MOF@MOF) nanoparticle was synthesized through a simple hydrothermal method and employed as an adsorbent and laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) matrix for the quantitative analysis of rhubarb anthraquinones (RAs). The properties of the materials were characterized by field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, and Brunauer-Emmett-Teller. The results indicate that MOF@MOF is regular octahedral structure with a size distribution of about 100 nm, having large BET specific surface area (920 m²/g). Using the MOF@MOF as a matrix shows lower background interference, higher sensitivity, and better storage stability than that of traditional matrices. The MOF@MOF matrix exhibits excellent salt tolerance even under a NaCl concentration of 150 mM. Then, the enrichment conditions were optimized, and the adsorption time of 10 min, adsorption temperature of 40 °C and adsorbent amount of 100 μg were selected. In addition, the possible mechanism of MOF@MOF as an adsorbent and matrix was discussed. Finally, the MOF@MOF nanoparticle was employed as a matrix for the sensitive MALDI-TOF-MS analysis of RAs in spiked rabbit plasma, and the recoveries are in the range of 88.3-101.5% with RSD ≤9.9%. In short, the novel MOF@MOF matrix has demonstrated its potential in the analysis of small-molecule compounds in biological samples.

Extending the visible light absorption of NH2-UiO-66 through diazotization reaction for photocatalytic chromium (VI) reduction

The optical properties of NH₂-UiO-66 as a visible light-active metal organic framework was further enhanced through the diazotization reaction with π-conjugated 1-naphthol reagent. Diffuse reflectance UV-Vis spectrum of diazotized MOF, named as Azo-UiO-66, exhibited a significant red shift compared to unfunctionalized NH₂-UiO-66 due to the formation of diazo compound. Also, Tauc calculations indicated considerable decrease in band gap energy from 2.68 to 1.7 eV, resulting in improvement of visible light harvesting. Furthermore, other physicochemical techniques, e.g., X-ray diffraction (XRD), N₂ adsorption-desorption analysis, thermogravimetric analysis (TGA), energ-dispersive X-ray (EDX), and CHN elemental analyses demonstrated the successful MOF diazotization with 1-naphthol and preservation of NH₂-UiO-66 framework upon post-modification process. The reduction of hexavalent chromium, Cr(VI), as a serious contaminant in wastewater to less toxic Cr(III) was performed over prepared photocatalyst, which demonstrated the positive role of ligand functionalization and enhancement of visible light absorption on overall photocatalytic performance of Azo-UiO-66.

Substituted Ti(IV) in Ce-UiO-66-NH2 Metal-Organic Frameworks Increases H2 and O2 Evolution under Visible Light

Metal-organic frameworks (MOFs) as photocatalysts have received increasing attention. In this work, a dual metal-substituted UiO-66-NH₂ (Ti/Ce-MOF) containing different Ti/Ce mole ratios (x = 0-2.46) has been prepared via post-synthetic exchange between Ce-UiO-66 and TiCl₄, followed by amination. The solid had a high surface area (828-937 m²/g) and a large pore volume (0.451-0.507 m³/g). Under visible light, Ti/Ce-MOF showed x-dependent activity for H₂O reduction and oxidation on a film electrode, respectively. However, such a change for H₂ evolution in a Na₂S/Na₂SO₃ aqueous solution was observed only after CdS loading. In combination with the photoluminescence and band parameters, we propose that the photoactivity of Ti/Ce-MOF for redox reaction is determined by its ability for electron transfer. Furthermore, there is an interfacial electron transfer from Ti/Ce-MOF to CdS and a hole transfer from CdS to Ti/Ce-MOF, respectively, significantly improving the efficiency of charge separation for redox reactions. This work offers a new insight that Ti substitution benefits the performance of Ce-based MOF.

Hydrolytically stable mixed ditopic linker based zirconium metal organic framework as a robust photocatalyst towards Tetracycline Hydrochloride degradation and hydrogen evolution

In the existing eco-crisis, designing and engineering an efficient as well as water stable photocatalyst for energy conversion and pollutant abatement remains crucial. In this regard, a mixed linker type zirconium metal organic framework (Zr-MOF) with terepthalic acid based ditopic linkers were utilized to design a single component photocatalyst through single step solvothermal method to utilize photons from visible light illumination towards hydrogen energy (H2) production and Tetracycline Hydrochloride (TCH) degradation. The one pot synthesized mixed linker based Zr-MOF displays visible light absorption through band gap tuning, superior exciton segregation and oxygen vacancy that cumulatively supports the enhancement in the photocatalytic output with respect to their pristine counterparts. Additionally, the X-ray photoelectron spectroscopy, optical and electrochemical studies strongly reinforces the above claims. The prepared mixed linker Zr-MOF showed superior photocatalytic H2 evolution performance of 247.88 µmol h-1 (apparent conversion efficiency; ACE = 1.9%) that is twice than its pristine Zr-MOFs. Moreover, in TCH degradation, the mixed linker MOF displays an enhanced efficacy of 91.8 % and adopts pseudo-first order type kinetics with a rate constant value of 0.032. Typically, the active species participating for the TCH photo-degradation follows the order of hydroxyl (OH.) < superoxide (O2.-) radicals. Consequently, the mixed linker Zr-MOF could be effectively used as a robust photocatalyst exhibiting boosted TCH degradation and H2 production.

Construction of multifunctional NH2-UiO-66 metal organic framework: sensing and photocatalytic degradation of ketorolac tromethamine and tetracycline in aqueous medium

Existence of pharmaceutical residues in water has endangered environmental pollution worldwide, which makes it ineludible to develop prospective bifunctional materials which not only possess excellent fluorescence behaviour to monitor pharmaceuticals but also exhibit simultaneous photocatalytic removal efficiency. Strengthened by functionalized metal organic framework (MOF) materials, we present here an amine functionalized zirconium-based MOF NH₂-UiO-66 which has been successfully synthesized using solvothermal approach. The as prepared MOF was subjected to numerous structural, morphological and compositional characterizations. Interestingly, featured by the excellent fluorescent intensity of MOF modulated by LMCT effect, NH₂-UiO-66 was screened to detect pharmaceutical compounds with KTC and TC in aqueous solution. The prepared functionalized MOF showcased excellent sensing platform with magnificent response range (0‒3 µM), lower limit of detection (160 nM; KTC and 140 nM; TC), excellent selectivity and influential anti-interference capability. More importantly, the practical utility of the proposed sensor was further explored for the determination of pharmaceutical drugs in real water samples with suitable recoveries. Simultaneously, the synthesized MOF also exhibited high photocatalytic efficiency towards the removal of KTC and TC under solar light irradiation. The degradation efficiency for KTC and TC was found to be 68.3% and 71.8% within 60 and 280 min of solar light, respectively. Moreover, excellent recyclability was demonstrated by the current synthesized system over five cycles. Overall, this study presents a feasible route for the utilization of functionalized MOFs as potential dual functional materials towards the simultaneous detection and degradation of specific pharmaceuticals from aqueous medium.

Hierarchical S-Scheme Heterostructure of CdIn2S4@UiO-66-NH2 toward Synchronously Boosting Photocatalytic Removal of Cr(VI) and Tetracycline

Developing highly efficient photocatalysts toward synchronously removing heavy metals and organic pollutants is still a serious challenge. Herein, we depict hierarchical S-scheme heterostructured photocatalysts prepared via in situ anchoring UiO-66-NH₂ nanoparticles onto the CdIn₂S₄ porous microsphere structures assembled with numerous nanosheets. In the mixed system of Cr(VI) and tetracycline (TC), the optimal photocatalyst (CIS@U66N-30) shows remarkable photocatalytic activities toward the synchronous removal of Cr(VI) (97.26%) and TC (close to 100% of) under visible-light irradiation for 60 min, being the best removal rates among those of the reported photocatalysts, and sustains the outstanding stability and reusability. Its reaction rate constants of Cr(VI) reduction and TC degradation are about 2.06 and 1.58 folds that in the single Cr(VI) and TC systems, respectively. The enhanced photocatalytic activities of CIS@U66N-30 mainly result from the following synergism: (1) its hierarchical structure offers abundant active sites, and the S-scheme migration mechanism of charge carriers in the heterostructure accelerates the separation and migration of the useful photoinduced electrons and holes with the high redox capability; (2) Cr(VI) and TC can serve as the electron scavenger for TC oxidation degradation and the hole and ^•OH scavenger for Cr(VI) reduction, respectively, further enhancing the separation and utilization efficiency of photoinduced electrons and holes. Besides, the possible TC degradation pathway and plausible S-scheme photocatalytic mechanism over CIS@U66N-30 for the concurrent elimination of Cr(VI) and TC are proposed.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Direct Z-scheme mediated SmVO4/UiO-66-NH2 heterojunction nanocomposite for the degradation of antibiotic tetracycline hydrochloride molecules under sunlight

The use of tetracycline hydrochloride (TCH) for veterinary, human therapy, and agriculture has risen in the past few decades, making it to become one of the most exploited antibiotics. However, TCH residue in the environment is causing issues related to the evolution of antibiotic-resistant bacteria. To address such a problem, photodegradation offers a potential solution to decompose these pollutants in wastewater and thereby mitigates negative environmental impacts. In this context, the research focuses on the use of the rare-earth metal oxide samarium orthovanadate (SmVO₄) with nanorod structure, coupled with UiO-66-NH₂ for the photocatalytic degradation. Their photocatalytic activity to degrade antibiotic TCH molecules is explored under simulated solar light irradiation. The integration of UiO-66-NH₂ with SmVO₄ enhanced the light absorption, recombination resistance, carrier lifetime (from 0.382 to 0.411 ns) and specific surface area (from 67.17 to 246 m²/g) of the composite system as confirmed from multiple analyses. The obtained results further indicated that SmVO₄/UiO-66-NH₂ nanocomposites could form a direct Z-scheme based heterojunction. Such mechanism of charge transfer leads to the effective degradation of TCH molecules up to 50% in 90 min under solar light, while it is degraded only 30% in the case of bare-SmVO₄ nanorods. In this work, the incorporation of UiO-66-NH₂ positively influences photoelectrochemical properties and improves the overall photoredox properties of SmVO₄ for the degradation of complex compounds like antibiotic TCH molecules. Therefore, UiO-66-NH₂ can be proposed as an effective material to sensitize the rare-earth based photocatalytic material.

Ni2P NPs loaded on methylthio-functionalized UiO-66 for boosting visible-light-driven photocatalytic H2 production

The UiO-66 family shows promising photocatalytic prospects in water splitting for hydrogen evolution under visible light irradiation due to its suitable band gap and adequate active sites. In this work, novel Ni₂P/UiO-66-(SCH₃)₂ composites were prepared by a simple solvothermal method. These as-synthesized samples were fully characterized by XRD, SEM, TEM, HRTEM, EDS, and XPS methods. The effectiveness of visible light driven photocatalytic water-splitting to produce hydrogen was investigated in the presence of sacrificial agents. The results showed that the optimal hydrogen yield of 5 wt% Ni₂P/UiO-66-(SCH₃)₂ is 3724.22 μmol g^-1 h^-1, reaching almost 187 times that of pristine UiO-66-(SCH₃)₂ (19.93 μmol g^-1 h^-1). Meanwhile, long term cycling stability tests also showed that Ni₂P/UiO-66-(SCH₃)₂ composites present an excellent photocatalytic H₂ production stability. Photoelectrochemical performance analysis revealed that the high catalytic activity of the composite materials could be associated with the synergistic effect of UiO-66-(SCH₃)₂ and Ni₂P. Light stimulates UiO-66-(SCH₃)₂ to generate electrons and holes, and Ni₂P as a cocatalyst could effectively transmit electrons and boost photogenerated charge separation. This work provides a reference for exploring UiO-66 family catalysts with good catalytic activity.

High-yield halide-assisted synthesis of metal-organic framework UiO-based nanocarriers

The synthesis of nanosized metal-organic frameworks (NMOFs) is requisite for their application as injectable drug delivery systems (DDSs) and other biorelevant purposes. Herein, we have critically examined the role of different synthetic parameters leading to the production of UiO-66 crystals smaller than 100 nm. Of note, we demonstrate the co-modulator role conferred by halide ions, not only to produce NMOFs with precise morphology and size, but also to significantly improve the reaction yield. The resulting NMOFs are highly crystalline and exhibit sustained colloidal stability in different biologically relevant media. As a proof of concept, these NMOFs were loaded with Rhodamine 6G (R6G), which remained trapped in most common biologically relevant media. When incubated with living mammalian cells, the R6G-loaded NMOFs were efficiently internalized and did not impair cell viability even at relatively high doses.

Boosting sluggish photocatalytic hydrogen evolution through piezo-stimulated polarization: a critical review

To address the growing energy demand, remarkable progress has been made in transferring the fossil fuel-based economy to hydrogen-based environmentally friendly photocatalytic technology. However, the sluggish production rate due to the quick charge recombination and slow diffusion process needs careful engineering to achieve the benchmark photocatalytic efficiency. Piezoelectric photocatalysis has emerged as a promising field in recent years due to its improved catalytic performance facilitated by a built-in electric field that promotes the effective separation of excitons when subjected to mechanical stimuli. This review discusses the recent progress in piezo-photocatalytic hydrogen evolution while elaborating on the mechanistic pathway, effect of piezo-polarization and various strategies adopted to improve piezo-photocatalytic activity. Moreover, our review systematically emphasizes the fundamentals of piezoelectricity and piezo-phototronics along with the operational mechanism for designing efficient piezoelectric photocatalysts. Finally, the summary and outlooks provide insight into the existing challenges and outline the future prospects and roadmap for the development of next-generation piezo-photocatalysts towards hydrogen evolution.

Metal organic framework-based Janus nanomaterials: rational design, strategic fabrication and emerging applications

Janus nanoparticles (JNPs) with dual segments comprising chemically distinct compositions have garnered the attention of researchers in the past few years. The combination of different materials with diversified morphology, topology, and distinct physico-chemical characteristics into the single Janus nanocrystal has yielded multifarious capabilities for a myriad of emerging applications involving catalysis, gas separation, electro-catalysis, adsorption and energy storage. However, the traditional Janus entities significantly lack the need for populous active sites and high surface area. To overcome the textural hurdles and improve the functionalities of JNPs, porous MOFs were eventually introduced into Janus particles. MOFs are well endowed with varied pore apertures, structures, large surface areas and tailored characteristics, making them potentially invaluable for Janus fabrication. Depending upon the usage, MOFs can be explored to design Metal@MOF, polymetalic@MOF, MOF@MOF and MOF-derived JNPs. In this regard, we have represented a holistic summarization of the design, synthesis and emerging applications of a rising class of multi-functionalized MOF-based Janus nanomaterials. Moreover, this article will significantly aid researchers with a vision of creating dual-composition porous nanomaterials as the MOF-based Janus nanoparticles is at infancy.

Improving the photocatalytic activity of NH2-UiO-66 by facile modification with Fe(acac)3 complex for photocatalytic water remediation under visible light illumination

A new and cost-effective photocatalyst was prepared via a facile modification of NH₂-UiO-66 with an iron (III) complex i.e. Fe(acac)₃, in order to enhance the optical properties and charge separation efficiency of pristine MOF. According to the results of UV-Vis DRS and Tauc plot calculations, the band gap value decreased from 2.7 eV to 2.46 eV for final Fe-UiO-66 photocatalyst, showing the improvement of light absorption in the visible region. Moreover, the photoluminescence (PL) and electrochemical impedance spectroscopies (EIS) confirmed the efficient separation of electron-hole carriers after introduction of Fe(acac)₃ into the MOF structure. The photo-Fenton reaction was carried out in the presence of photocatalyst and hydrogen peroxide under white LED illumination for degradation of organic dyes (methyl violet 2B, rhodamine B, malachite green, and methylene blue) and tetracycline (TC) as the examples of water pollutants. A significant dye and TC removal up to 92% and 85% were obtained in photo-Fenton system containing Fe-UiO-66 photocatalyst, respectively. The trap experiment using isopropyl alcohol (IPA) and Na₂EDTA demonstrated that the major active species for pollutants degradation are hydroxyl radicals (^•OH) and photo-generated holes (h⁺), respectively. Besides, the transfer of photo-generated electron (e^-) to Fe(acac)₃ complex resulted in the reduction of Fe³⁺ to Fe²⁺ and acceleration of the photo-Fenton reaction. Also, the photocatalyst was found to be very stable during the photo-Fenton reaction according to physicochemical analyses, and it can be reused four times without remarkable decrease in activity.

Applications of Metal-Organic Frameworks in Water Treatment: A Review

The ever-expanding scale of industry and agriculture has led to the gradual increase of pollutants (e.g., heavy metal ions, synthetic dyes, and antibiotics) in water resources, and the ecology and wastewater are grave problems that need to be solved urgently and has attracted widespread attention from the research community and industry in recent years. Metal-organic frameworks (MOFs) are a type of organic-inorganic hybrid material with a distinctive 3D network crystal structure. Lately, MOFs have made striking progress in the fields of adsorption, catalytic degradation, and biomedicine on account of their large specific surface and well-developed pore structure. This review summarizes the latest research achievements in the preparation of pristine MOFs, MOF composites, and MOF derivatives for various applications including the removal of heavy metal ions, organic dyes, and other harmful substances in sewage. Furthermore, the working mechanisms of utilizing adsorption, photocatalytic degradation, and membrane separation technologies are also briefly described for specific pollutants removal from sewage. It is expected that this review will provide inspiration and references for the synthesis of pristine MOFs as well as their composites and derivatives with excellent water treatment performance.

Mixed-Valence Bimetallic Ce/Zr MOF-Based Nanoarchitecture: A Visible-Light-Active Photocatalyst for Ciprofloxacin Degradation and Hydrogen Evolution

A mixed-valency bimetallic Ce/Zr MOF with Ce³⁺/Ce⁴⁺ ions incorporated and an oxygen vacancy-rich single-component photocatalyst have been designed through the one-step solvothermal route to harness photons from the visible-light spectrum for green energy (H₂) generation and ciprofloxacin (CIP) degradation. The one-pot-engineered bimetallic Ce/Zr MOF shows visible-light-active characteristics accompanied by a narrower band gap, along with enhanced exciton separation and superior ligand-to-metal charge transfer (LMCT), due to the presence of an interconvertible Ce³⁺/Ce⁴⁺ ions pair in comparison to its pristine MOF counterpart. The Ce ion insertion led to increase in electron density around the Zr⁴⁺ ion, along with generation of some oxygen vacancies (OV), which cumulatively led to the rise in the photo-reaction output. The synthesized UNH (Ce/Zr 1:1) MOF displayed a boosted photocatalytic H₂ production rate of 468.30 μmol h^-1 (ACE = 3.51%), which is around fourfolds higher than that of pristine MOFs. Moreover, for CIP photodegradation, the UNH (Ce/Zr 1:1) shows an enhanced efficiency of 90.8% and follows pseudo-first-order kinetics with a rate constant of 0.0363. Typically, the active species involved in the photo-redox reaction of the CIP photodegradation follows the order hydroxyl radical (OH^•) < superoxide radical (O₂^•-), as confirmed by the TA and NBT tests. Consequently, the bimetallic Ce/Zr MOF can be readily employed as a robust photocatalyst with enhanced tendencies towards CIP degradation and H₂ evolution.

Edge Rich Ultrathin Layered MoS2 Nanostructures for Superior Visible Light Photocatalytic Activity

Nanostructures of layered 2D materials have been proven one of the significant recent trends for visible-light-driven photocatalysis because of their unique morphology, effective optical adsorption, and rich active sites. Herein, we synthesized ultrathin-layered MoS₂ nanoflowers and nanosheets with rich active sites by using a facile hydrothermal technique. The photocatalytic performance of the as-synthesized MoS₂ nanoflowers (NF) and nanosheets (NS) were investigated for the photodegradation of MB (methylene blue), MG (malachite Green), and RhB (rhodamine B) dye under visible light irradiations. Ultrathin-layered nanoflowers showed faster degradation (96% in 150 min) in RhB under visible light irradiation, probably due to a large number of active sites and high available surface area. The kinetic study demonstrated that the first-order kinetic model best explained the process of photodegradation. The MoS₂ nanoflowers catalysts has similar catalytic performance after four consecutive cyclic performances, demonstrating their good stability. The results showed that the MoS₂ nanoflowers have outstanding visible-light-driven photocatalytic activity and could be an effective catalyst for industrial wastewater treatment.

Synergistic Effect of the Sulfur Vacancy and Schottky Heterojunction on Photocatalytic Uranium Immobilization: The Thermodynamics and Kinetics

Not only a critical matter in the nuclear fuel cycle but uranium is also a global contaminant with both radioactive and chemical toxicity. Reducing soluble hexavalent uranium [U(VI)] to relatively nonimmigrated tetravalent uranium [U(IV)] by photocatalytic technologies is recognized as a highly promising strategy for avoiding environmental pollution and re-extracting uranium resources from nuclear wastewater. Herein, we have designed a heterojunction photocatalyst constructed from the carbon aerogels (CA) and the CdS nanoflowers with an S-vacancy (CA@CdS-SV). With the S-vacancy and heterojunction being synergized, the U(VI) removal rate exceeded 97% in 40 min without the addition of any sacrificial agents. As impacted by the synergistic effects of the S-vacancy and heterojunction, thermodynamics and kinetics revealed that photogenerated electrons were first captured via shallow traps generated by vacancies on CdS-SV and then transferred to the CA surfaces through the heterojunction to realize the spatial separation of carriers, thereby achieving a satisfactory performance. This work is considered to underpin the improvement of U(VI) immobilization by exploiting the synergistic effect of vacancy engineering and the Schottky heterojunction from the perspective of thermodynamics and kinetics.

Tailoring the fusion effect of phase-engineered 1T/2H-MoS2 towards photocatalytic hydrogen evolution

Enhanced photocatalytic hydrogen evolution on 30-1T/2H-MoS2 with a higher concentration of the 1T phase was achieved due to the higher availability of electrons and dense active sites after the incorporation of the 1T phase in 2H-MoS2.

Hierarchically Porous Metal-Organic Framework/MoS2 Interface for Selective Photocatalytic Conversion of CO2 with H2 O into CH3 COOH

Metal-organic frameworks (MOFs) provide a platform to design new heterogeneous catalysts for catalytic CO₂ reduction, but selective formation of C2 valuable liquid fuel products remains a challenge. Herein, we propose a strategy to synthesize composites by integrating MoS₂ nanosheets into hierarchically porous defective UiO-66 (d-UiO-66) to form Mo-O-Zr bimetallic sites on the interfaces between UiO-66 and MoS₂ . The active interfaces are favorable for the efficient transfer of photo-generated charge carriers and for promoting the activity, whereas, the synergy of the components at the interfaces achieves selectivity for C2 production. The d-UiO-66/MoS₂ composite facilitates the photo-catalytic conversion of gas phase CO₂ and H₂ O to CH₃ COOH under visible light irradiation without any other adducts. The evolution rate and selectivity of CH₃ COOH reached 39.0 μmol g^-1  h^-1 and 94 %, respectively, without any C1 products, suggesting a new approach for the design of highly efficient photocatalysts of CO₂ for C2 production. Theoretical calculations demonstrate the charge-polarized Zr-O-Mo aided the C-C coupling process with the largely reduced energy barrier.

Black titania an emerging photocatalyst: review highlighting the synthesis techniques and photocatalytic activity for hydrogen generation

The TiO₂ semiconductor photocatalyst is in the limelight of sustainable energy research in recent years because of its beneficial properties. However, its wide band-gap and rapid exciton recombination rate makes it a lame horse, and reduces its photocatalytic efficiency. Recently, researchers have developed facile methods for lowering the band-gap, so that it captures a wide range of solar spectrum, but the efficiency is still way behind the target value. After the discovery of black titania (B-TiO₂), the associated drawbacks of white TiO₂ and its modified forms were addressed to a large extent because it not only absorbs photons in a broad spectral range (UV to IR region), but also modifies the structural and morphological features, along with the electronic properties of the material, significantly boosting the catalytic performance. Hence, B-TiO₂ effectively converts solar energy into renewable chemical energy i.e. green fuel H₂ that can ultimately satisfy the energy crisis and environmental pollution. However, the synthesis techniques involved are quite tedious and challenging. Hence, this review summarizes various preparation methods of B-TiO₂ and the involved characterization techniques. It also discusses the different modification strategies adopted to improve the H₂ evolution activity, and hopes that this review acts as a guiding tool for researchers working in this field.

Impact of Iron in Three-Dimensional Co-MOF for Electrocatalytic Water Oxidation

The integration of iron (Fe) into a cobalt metal-organic framework (Co-MOF) tunes the electronic structure of the parent MOF as well as enhances their electrocatalytic characteristics. By using pyrazine and hydrofluoric acid, we have synthesized three-dimensional Co-MOF [CoFC₄H₄N₂(SO₄)_0.5], (1), and Fe-MOF [FeFC₄H₄N₂(SO₄)_0.5], (2), through a single-step solvothermal method. Further, a series of bimetallic (having both Co and Fe metal centers) MOFs [Co_1-xFe_xFC₄H₄N₂(SO₄)_0.5] were synthesized with variable concentrations of Fe, and their electrocatalytic performances were analyzed. The optimized amount of Fe significantly impacted the electrocatalytic behavior of the bimetallic MOF toward water oxidation. Particularly, the Co_0.75Fe_0.25-MOF needs only 239 and 257 mV of overpotential to deliver 10 and 50 mA/cm² current density, respectively, in alkaline electrolytic conditions. The Co_0.75Fe_0.25-MOF shows a lower Tafel slope (42 mV/dec.) among other bimetallic MOFs and even the commercial RuO₂, and it has excellent durability (with ∼8 mV increases in overpotential after 18 h of electrolysis) and 97.05% Faradaic efficiency, which further evident its catalytic excellency. These findings explore the intrinsic properties of MOF-based electrocatalysts and prospect the suitability for future water electrolysis.

Hydrolytically stable citrate capped Fe3O4@UiO-66-NH2 MOF: A hetero-structure composite with enhanced activity towards Cr (VI) adsorption and photocatalytic H2 evolution

Design and facile fabrication of a magnetically separable hetero-structure photocatalyst as well as an adsorbent having dual green benefits towards energy conversion and pollutant remediation are quite indispensable in the current scenario. In this regard, a composite of citrate capped Fe₃O₄ and UiO-66-NH₂ has been designed to remediate Cr (VI) by adsorption and harvest photons from visible light for clean energy (H₂) conversion. The material was prepared by the union of citrate capped Fe₃O₄ (CCM) and versatile aqueous stable Zr-based MOF (UiO-66-NH₂) through in-situ solvothermal method. The composite of CCM with MOF (MU-2) was studied through sophisticated analysis techniques; PXRD, FT-IR, BET, UV-Visible DRS, PL, TG, HRTEM and XPS etc. to reveal the inherent characteristics of the material. BET surface analysis revealed high specific surface area (572.13 m² g^-1) of MU-2 in comparison to its pristine MOF. Furthermore, the dual function composite MU-2's VSM studies showed that its magnetic saturation is 3.07 emu g^-1 that is suitable for magnetic separation after desired reaction from aqueous media. The Cr (VI) sorption studies revealed that the composite adsorbent (MU-2) showed maximum monolayer adsorption capacity (Q_m) of 743 mg g^-1 which followed pseudo second order kinetics. Moreover, the sorption thermodynamics revealed that the process was spontaneous and endothermic in nature. In addition to it, the synthesized composite material displayed enhanced activity towards photocatalytic H₂ evolution with a maximum evolution rate of 417 µmole h^-1 with an apparent conversion efficiency (ACE) of 3.12 %. Typically, MU-2 displays high adsorptions of Cr (VI) as well as some extent of Cr (VI) reduction owning to its populous active sites and free carboxylate groups respectively. Moreover, the synergistic effect of CCM and UNH in the composite resulted in Z scheme mediated charge transfer mechanism that showed enhanced H₂ photo-evolution rates. Hence, MU-2 can be readily utilized as magnetically retrievable dual function composite for Cr (VI) adsorption and photocatalytic H₂ evolution.

A review on vertical and lateral heterostructures of semiconducting 2D-MoS2 with other 2D materials: a feasible perspective for energy conversion

Fossil fuels as a double-edged sword are essential to daily life. However, the depletion of fossil fuel reservoirs has increased the search for alternative renewable energy sources to procure a more sustainable society. Accordingly, energy production through water splitting, CO₂ reduction and N₂ reduction via photocatalytic and electrocatalytic pathways is being contemplated as a greener methodology with zero environmental pollution. Owing to their atomic-level thickness, two-dimensional (2D) semiconductor catalysts have triggered the reawakening of interest in the field of energy and environmental applications. Among them, following the unconventional properties of graphene, 2D MoS₂ has been widely investigated due to its outstanding optical and electronic properties. However, the photo/electrocatalytic performance of 2D-MoS₂ is still unsatisfactory due to its low charge carrier density. Recently, the development of 2D/2D heterojunctions has evoked interdisciplinary research fascination in the scientific community, which can mitigate the shortcomings associated with 2D-MoS₂. Following the recent research trends, the present review covers the recent findings and key aspects on the synthetic methods, fundamental properties and practical applications of semiconducting 2D-MoS₂ and its heterostructures with other 2D materials such as g-C₃N₄, graphene, CdS, TiO₂, MXene, black phosphorous, and boron nitride. Besides, this review details the viable application of these materials in the area of hydrogen energy production via the H₂O splitting reaction, N₂ fixation to NH₃ formation and CO₂ reduction to different value-added hydrocarbons and alcohol products through both photocatalysis and electrocatalysis. The crucial role of the interface together with the charge separation principle between two individual 2D structures towards achieving satisfactory activity for various applications is presented. Overall, the current studies provide a snapshot of the recent breakthroughs in the development of various 2D/2D-based catalysts in the field of energy production, delivering opportunities for future research.

Interface enriched highly interlaced layered MoS2/NiS2 nanocomposites for the photocatalytic degradation of rhodamine B dye

In the past few decades, air and water pollution by organic dyes has become a serious concern due to their high toxicity. Removal of these organic dyes from polluted water bodies is a serious environmental concern and the development of new advanced photocatalytic materials for decomposing organic dyes can be a good solution. In this work, layered molybdenum disulfide/nickel disulfide (MoS₂/NiS₂) nanocomposites with various NiS₂ content was synthesized by a one-step hydrothermal method using citric acid as a reducing agent. The X-ray diffraction pattern shows the hexagonal and cubical crystal structure of MoS₂ and NiS₂, respectively. Morphological analysis confirms the formation of MoS₂/NiS₂ nanosheets. The elemental composition of the samples was carried out by XPS, which shows a significant interaction between NiS₂ and MoS₂. The photocatalytic performance of MoS₂/NiS₂ nanocomposites was studied by the degradation of rhodamine B (RhB). Ni-4 sample shows higher photocatalytic activity with a maximum degradation of 90.61% under visible light irradiation for 32 min.

The photocatalytic performance of MoS₂/NiS₂ nanocomposites was studied by the degradation of rhodamine B (RhB). Ni-4 sample shows higher photocatalytic activity with a maximum degradation of 90.61% under visible light irradiation for 32 min.

Exfoliated Boron Nitride (e-BN) Tailored Exfoliated Graphitic Carbon Nitride (e-CN): An Improved Visible Light Mediated Photocatalytic Approach towards TCH Degradation and H2 Evolution

A series of 2D/2D exfoliated boron nitride/exfoliated g-C₃N₄ nanocomposites denoted as e-BN/e-CN have been successfully prepared using a simple in situ technique. The successful deposition of e-BN on e-CN was confirmed from high-resolution transmission electron microscopy analysis. According to electrochemical measurements, 1.5 wt % e-BN/e-CN nanocomposites showed 1.5 times more photocurrent than e-CN, which indicates the successful formation of an e-BN/e-CN heterostructure. The photocatalytic activities of the e-CN and e-BN/e-CN composites were investigated through photocatalytic tetracycline hydrochloride (TCH) degradation and H₂ evolution under visible light illumination. The 1.5 wt % e-BN/e-CN composite demonstrated the highest photocatalytic activities, which are about 21 and 1.5 fold greater than e-CN towards H₂ generation with an apparent conversion efficiency of 2.34% and TCH degradation, respectively. The improved photocatalytic activities of e-BN/e-CN photocatalysts were ascribed to the augmented light-harvesting ability and enhanced separation efficiency of charge carriers. Lower photoluminescence intensity and a smaller arc value in the impedance spectra again proved the reduced recombination of the e^--h⁺ pairs in the e-BN/e-CN nanocomposites. Trapping experiments show that ^•O₂^-, h⁺, and ^•OH radicals are the predominant reactive species that accelerated the photocatalytic activities of e-BN/e-CN composites. This study opens up a new window towards the fabrication of such 2D/2D nanocomposites in the field of photocatalysis.