Enhancement of CO2 Adsorption and Catalytic Properties by Fe-Doping of [Ga2(OH)2(L)] (H4L = Biphenyl-3,3',5,5'-tetracarboxylic Acid), MFM-300(Ga2)

Electron beam and thermal stabilities of MFM-300(M) metal-organic frameworks

This work reports the thermal and electron beam stabilities of a series of isostructural metal-organic frameworks (MOFs) of type MFM-300(M) (M = Al, Ga, In, Cr). MFM-300(Cr) was most stable under the electron beam, having an unusually high critical electron fluence of 1111 e- Å-2 while the Group 13 element MOFs were found to be less stable. Within Group 13, MFM-300(Al) had the highest critical electron fluence of 330 e- Å-2, compared to 189 e- Å-2 and 147 e- Å-2 for the Ga and In MOFs, respectively. For all four MOFs, electron beam-induced structural degradation was independent of crystal size and was highly anisotropic, although both the length and width of the channels decreased during electron beam irradiation. Notably, MFM-300(Cr) was found to retain crystallinity while shrinking up to 10%. Thermal stability was studied using in situ synchrotron X-ray diffraction at elevated temperature, which revealed critical temperatures for crystal degradation to be 605, 570, 490 and 480 °C for Al, Cr, Ga, and In, respectively. The pore channel diameters contracted by ≈0.5% on desorption of solvent species, but thermal degradation at higher temperatures was isotropic. The observed electron stabilities were found to scale with the relative inertness of the cations and correlate well to the measured lifetime of the materials when used as photocatalysts.

Recent Advances of Bimetallic-Metal Organic Frameworks: Preparation, Properties, and Fluorescence-Based Biochemical Sensing Applications

Bimetallic-metal organic frameworks (BiM-MOFs) or bimetallic organic frameworks represent an innovative and promising class of porous materials, distinguished from traditional monometallic MOFs by their incorporation of two metal ions alongside organic linkers. BiM-MOFs, with their unique crystal structure, physicochemical properties, and composition, demonstrate distinct advantages in the realm of biochemical sensing applications, displaying improvements in optical properties, stability, selectivity, and sensitivity. This comprehensive review explores into recent advancements in leveraging BiM-MOFs for fluorescence-based biochemical sensing, providing insights into their design, synthesis, and practical applications in both chemical and biological sensing. Emphasizing fluorescence emission as a transduction mechanism, the review aims to guide researchers in maximizing the potential of BiM-MOFs across a broader spectrum of investigations. Furthermore, it explores prospective research directions and addresses challenges, offering valuable perspectives on the evolving landscape of fluorescence-based probes rooted in BiM-MOFs.

Polarity profiling of porous architectures: solvatochromic dye encapsulation in metal-organic frameworks

Metal-organic frameworks (MOFs) have gathered significant interest due to their tunable porosity leading to diverse potential applications. In this study, we investigate the incorporation of the fluorosolvatochromic dye 2-butyl-5,6-dimethoxyisoindoline-1,3-dione ([double bond, length as m-dash]Phth) into various MOF structures as a means to assess the polarity of these porous materials. As a purely inorganic compound, zeolite Y was tested for comparison. The fluorosolvatochromic behavior of Phth, which manifests as changes in its emission spectra in response to solvent polarity, provides a sensitive probe for characterizing the local environment within the MOF pores. Through systematic variation of the MOF frameworks, we demonstrate the feasibility of using (fluoro-)solvatochromic dyes as probes for assessing the polarity gradients within MOF structures. Additionally, the fluorosolvatochromic response was studied as a function of loading amount. Our findings not only offer insights into the interplay between MOF architecture and guest molecule interactions but also present a promising approach for the rational design and classification of porous materials based on their polarity properties.

Efficient CO2 adsorption using chitosan, graphene oxide, and zinc oxide composite

This study was deeply focused on developing a novel CTS/GO/ZnO composite as an efficient adsorbent for CO2 adsorption process. To do so, design of experiment (DOE) was done based on RSM-BBD technique and according to the DOE runs, various CTS/GO/ZnO samples were synthesized with different GO loading (in the range of 0 wt% to 20 wt%) and different ZnO nanoparticle's loading (in the range of 0 wt% to 20 wt%). A volumetric adsorption setup was used to investigate the effect of temperature (in the range of 25-65 °C) and pressure (in the range of 1-9 bar) on the obtained samples CO2 uptake capability. A quadratic model was developed based on the RSM-BBD method to predict the CO2 adsorption capacity of the composite sample within design space. In addition, CO2 adsorption process optimization was conducted and the optimum values of the GO, ZnO, temperature, and pressure were obtained around 23.8 wt%, 18.2 wt%, 30.1 °C, and 8.6 bar, respectively, with the highest CO2 uptake capacity of 470.43 mg/g. Moreover, isotherm and kinetic modeling of the CO2 uptake process were conducted and the Freundlich model (R2 = 0.99) and fractional order model (R2 = 0.99) were obtained as the most appropriate isotherm and kinetic models, respectively. Also, thermodynamic analysis of the adsorption was done and the ∆H°, ∆S°, and ∆G° values were obtained around - 19.121 kJ/mol, - 0.032 kJ/mol K, and - 9.608 kJ/mol, respectively, indicating exothermic, spontaneously, and physically adsorption of the CO2 molecules on the CTS/GO/ZnO composite's surface. Finally, a renewability study was conducted and a minor loss in the CO2 adsorption efficiency of about 4.35% was obtained after ten cycles, demonstrating the resulting adsorbent has good performance and robustness for industrial CO2 capture purposes.

MFM-300(Sc): a chemically stable Sc(III)-based MOF material for multiple applications

Developing robust multifunctional metal-organic frameworks (MOFs) is the key to advancing the further deployment of MOFs into relevant applications. Since the first report of MFM-300(Sc) (MFM = Manchester Framework Material, formerly known as NOTT-400), the development of applications of this robust microporous MOF has only grown. In this review, a summary of the applications of MFM-300(Sc), as well as some emerging advanced applications, have been discussed. The adsorption properties of MFM-300(Sc) are presented systematically. Particularly, this contribution is focused on acid and corrosive gas adsorption. In addition, recent applications for catalysis based on the outstanding hemilabile Sc-O bond character are highlighted. Finally, some new research areas are introduced, such as host-guest chemistry and biomedical applications. This highlight aims to showcase the recent advances and the potential for developing new applications of this promising material.

Adsorption and Degradation of Volatile Organic Compounds by Metal-Organic Frameworks (MOFs): A Review

Volatile organic compounds (VOCs) are a major threat to human life and health. The technologies currently used to remove VOCs mainly include adsorption and photocatalysis. Adsorption is the most straightforward strategy, but it cannot ultimately eliminate VOCs. Due to the limited binding surface, the formaldehyde adsorption on conventional photocatalysts is limited, and the photocatalytic degradation efficiency is not high enough. By developing novel metal-organic framework (MOF) materials that can catalytically degrade VOCs at room temperature, the organic combination of new MOF materials and traditional purification equipment can be achieved to optimize adsorption and degradation performance. In the present review, based on the research on the adsorption and removal of VOCs by MOF materials in the past 10 years, starting from the structure and characteristics of MOFs, the classification of which was described in detail, the influencing factors and mechanisms in the process of adsorption and removal of VOCs were summarized. In addition, the research progress of MOF materials was summarized, and its future development in this field was prospected.

Negative electrostatic potentials in a Hofmann-type metal-organic framework for efficient acetylene separation

Efficient adsorptive separation of acetylene (C2H2) from carbon dioxide (CO2) or ethylene (C2H4) is industrially important but challenging due to the identical dynamic diameter or the trace amount. Here we show an electrostatic potential compatible strategy in a nitroprusside-based Hofmann-type metal-organic framework, Cu(bpy)NP (NP = nitroprusside, bpy = 4,4'-bipyridine), for efficient C2H2 separation. The intruding cyanide and nitrosyl groups in undulating one-dimensional channels induce negative electrostatic potentials for preferential C2H2 recognition instead of open metal sites in traditional Hofmann-type MOFs. As a result, Cu(bpy)NP exhibits a 50/50 C2H2/CO2 selectivity of 47.2, outperforming most rigid MOFs. The dynamic breakthrough experiment demonstrates a 99.9% purity C2H4 productivity of 20.57 mmol g-1 from C2H2/C2H4 (1/99, v/v) gas-mixture. Meanwhile, C2H2 can also be captured and recognized from ternary C2H2/CO2/C2H4 (25/25/50, v/v/v) gas-mixture. Furthermore, computational studies and in-situ infrared spectroscopy reveal that the selective C2H2 binding arises from the compatible pore electro-environment generated by the electron-rich N and O atoms from nitroprusside anions.

Direct Visualization of Supramolecular Binding and Separation of Light Hydrocarbons in MFM-300(In)

The purification of light olefins is one of the most important chemical separations globally and consumes large amounts of energy. Porous materials have the capability to improve the efficiency of this process by acting as solid, regenerable adsorbents. However, to develop translational systems, the underlying mechanisms of adsorption in porous materials must be fully understood. Herein, we report the adsorption and dynamic separation of C₂ and C₃ hydrocarbons in the metal-organic framework MFM-300(In), which exhibits excellent performance in the separation of mixtures of ethane/ethylene and propyne/propylene. Unusually selective adsorption of ethane over ethylene at low pressure is observed, resulting in selective retention of ethane from a mixture of ethylene/ethane, thus demonstrating its potential for a one-step purification of ethylene (purity > 99.9%). In situ neutron powder diffraction and inelastic neutron scattering reveal the preferred adsorption domains and host-guest binding dynamics of adsorption of C₂ and C₃ hydrocarbons in MFM-300(In).

Recent advancement in bimetallic metal organic frameworks (M’MOFs): Synthetic challenges and applications

Metal-organic frameworks (MOFs) is a burgeoning research field and has received increasing interest in recent years due to their inherent advantages of inorganic metal ions, range of organic linkers, tunable...

MOFs in the time domain

Many of the proposed applications of metal-organic framework (MOF) materials may fail to materialize if the community does not fully address the difficult fundamental work needed to map out the 'time gap' in the literature - that is, the lack of investigation into the time-dependent behaviours of MOFs as opposed to equilibrium or steady-state properties. Although there are a range of excellent investigations into MOF dynamics and time-dependent phenomena, these works represent only a tiny fraction of the vast number of MOF studies. This Review provides an overview of current research into the temporal evolution of MOF structures and properties by analysing the time-resolved experimental techniques that can be used to monitor such behaviours. We focus on innovative techniques, while also discussing older methods often used in other chemical systems. Four areas are examined: MOF formation, guest motion, electron motion and framework motion. In each area, we highlight the disparity between the relatively small amount of (published) research on key time-dependent phenomena and the enormous scope for acquiring the wider and deeper understanding that is essential for the future of the field.

Isoreticular Chemistry of Group 13 Metal-Organic Framework Compounds Based on V-Shaped Linker Molecules: Exceptions to the Rule?

Following the concept of isoreticular chemistry, we carried out a systematic study on Ga-containing metal-organic frameworks (MOFs) using six V-shaped linker molecules of differing sizes, geometries, and additional functional groups. The linkers included three isophthalic acid derivatives (m-H₂BDC-R, R = CH₃, OCH₃, NHCOCH₃), thiophene-2,5-dicarboxylic acid (H₂TDC), and two 4,4'-sulfonyldibenzoic acid derivatives (H₂SDBA, DPSTA). The crystal structures of seven compounds were elucidated by a combination of model building, single-crystal X-ray diffraction (SCXRD), three-dimensional electron diffraction (3D ED), and Rietveld refinements against powder X-ray diffraction (PXRD) data. Four new Ga-MOFs that are isoreticular with their aluminum counterparts, i.e. Ga-CAU-10-R (Ga(OH)(m-BDC-R); R = OCH₃, NHCOCH₃), Ga-CAU-11 (Ga(OH)(SDBA)), and Ga-CAU-11-COOH (Ga(OH)(H₂DPSTC)), were obtained. For the first time large single crystals of a MOF crystallizing in the CAU-10 structure type could be isolated, i.e. Ga-CAU-10-OCH₃, which permitted a detailed structural characterization. In addition, the use of 5-methylisophthalic acid and thiophene-2,5-dicarboxylic acid resulted in two new Ga-MOFs denoted Ga-CAU-49 and Ga-CAU-51, respectively, which are not isostructural with any known Al-MOF. The crystal structure of Ga-CAU-49 ([Ga₄(m-HBDC-CH₃)₂(m-BDC-CH₃)₃(OH)₄(H₂O)]) contains an unprecedented rod-shaped inorganic building unit (IBU) of the formula _∞¹{Ga₁₆(OH)₁₈O₆₀}, composed of corner-sharing GaO₅ and GaO₆ polyhedra. In Ga-CAU-51 ([Ga(OH)(C₅H₂O₂S)]) chains of alternating cis and trans corner-sharing GaO₆ polyhedra form the IBU. A detailed characterization of the title compounds was carried out, including nitrogen gas and water vapor sorption measurements. Ga-CAU-11 was the only compound exhibiting porosity toward nitrogen with a type I isotherm, a specific surface area of a_S,BET = 210 m²/g, and a micropore volume of V_mic = 0.09 cm³/g. The new MOF Ga-CAU-51 exhibits exceptional water sorption properties with a reversible S-shaped isotherm and a high uptake around p/p₀ = 0.38 of m_ads = 370 mg/g.

Amino-Functionalised Hybrid Ultramicroporous Materials that Enable Single-Step Ethylene Purification from a Ternary Mixture

Pyrazine-linked hybrid ultramicroporous (pore size <7 Å) materials (HUMs) offer benchmark performance for trace carbon capture thanks to strong selectivity for CO2 over small gas molecules, including light hydrocarbons. That the prototypal pyrazine-linked HUMs are amenable to crystal engineering has enabled second generation HUMs to supersede the performance of the parent HUM, SIFSIX-3-Zn, mainly through substitution of the metal and/or the inorganic pillar. Herein, we report that two isostructural aminopyrazine-linked HUMs, MFSIX-17-Ni (17=aminopyrazine; M=Si, Ti), which we had anticipated would offer even stronger affinity for CO2 than their pyrazine analogs, unexpectedly exhibit reduced CO2 affinity but enhanced C2 H2 affinity. MFSIX-17-Ni are consequently the first physisorbents that enable single-step production of polymer-grade ethylene (>99.95 % for SIFSIX-17-Ni) from a ternary equimolar mixture of ethylene, acetylene and CO2 thanks to coadsorption of the latter two gases. We attribute this performance to the very different binding sites in MFSIX-17-Ni versus SIFSIX-3-Zn.

Capture of toxic gases in MOFs: SO2, H2S, NH3 and NO x

MOFs are promising candidates for the capture of toxic gases since their adsorption properties can be tuned as a function of the topology and chemical composition of the pores. Although the main drawback of MOFs is their vulnerability to these highly corrosive gases which can compromise their chemical stability, remarkable examples have demonstrated high chemical stability to SO2, H2S, NH3 and NO x . Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases. Thus, the interactions of such functional groups (coordinatively unsaturated metal sites, μ-OH groups, defective sites and halogen groups) with these toxic molecules, not only determines the capture properties of MOFs, but also can provide a guideline for the desigh of new multi-functionalised MOF materials. Thus, this perspective aims to provide valuable information on the significant progress on this environmental-remediation field, which could inspire more investigators to provide more and novel research on such challenging task.

Bi Metal-Organic Framework (Ce/Ni-BTC) as Heterogeneous Catalyst for the Green Synthesis of Substituted Chromeno[4, 3-b]quinolone under Solvent Free Condition

AIMS

Novel bi metal organic framework (b-MOF) is synthesized and used as a heterogeneous catalyst for the synthesis of chromeno[4, 3-b]quinolone derivatives via one-pot and solvent-free, four-component reaction of dimedone, aromatic aldehydes, 4-hydroxycoumarin and ammonium acetate at 110°C.

BACKGROUND

b-MOFs can be used as a heterogeneous catalyst in the synthesis of many organic compounds. The active and multi-purpose sites in b-MOFs provide a varied function in their catalytic applications. In this paper, reductive CES method is applied for the synthesis of Ce_0.47/Ni_0.53-BTC b-MOF. The resulting b-MOF was used as a heterogeneous catalyst for the synthesis of chromeno[4, 3-b]quinolone via one-pot and solvent-free, fourcomponent reaction of dimedone, aromatic aldehyde, 4-hydroxycoumarin and ammonium acetate at 110 °C.

METHOD

Ce_0.47/Ni_0.53-BTC was synthesized in an electrochemical cell composed of a stainless steel foil with a size of 5cm×5cm centered between two 5cm×5cm sized graphite plates as the anodes by the cathodic current density of 0.2 A/dm² and placed in a solution of cerium nitrate (0.3 g), nickel nitrate (0.3 g), H₃BTC (0.2 g) and NaNO₃ (0.1 g) in ethanol (500 mL). Ce_0.47/Ni_0.53-BTC (10 mg) was added to a mixture of dimedone (1 mmol), aromatic aldehyde (1 mmol), hydroxycoumarin (1 mmol) and ammonium acetate (1.5 mmol) and stirred at 110 °C under solvent-free conditions for 45 min. The reaction evolution was controlled by the TLC (hexane:ethyl acetate, 4:1). Then, boiling ethanol was added to the reaction mixture and stirred at room temperature for 15 min. After the reaction completion, the catalyst was separated by centrifuge. Finally, the reaction mixture was placed in an ice bath, which resulted in a white solid product and recrystallized from ethanol to give the pure product.

RESULT

The b-MOF catalyst showed very good efficiency in the synthesis of the desired compounds and can be easily recovered by centrifuge and reused at least five times without a decrease in catalytic activity.

CONCLUSION

In this report, a novel bi metal-organic framework (Ce0.47/Ni0.53-BTC) is synthesized via the cathodic electrosynthesis method. The synthesized b-MOF is fully characterized by several characterization methods. The catalytic activity of Ce0.47/Ni0.53-BTC is investigated in the synthesis of chromeno[4, 3-b]quinolone derivatives via one-pot four-component reaction of dimedone, aromatic aldehyde, 4-hydroxycoumarin and ammonium acetate. The reaction optimization results showed that the highest isolated yield was obtained when the reaction was performed in solvent-free conditions at 110 °C. The catalyst showed to be highly efficient in the synthesis of the desired compounds and performing the reaction utilizing various starting materials gave the products in good isolated yields, which proves the generality and the scope of the method. The catalyst could easily be recovered by centrifuge and reused at least five times without a decrease in catalytic activity.

Porous Metal-Organic Polyhedra: Morphology, Porosity, and Guest Binding

Designing porous materials which can selectively adsorb CO₂ or CH₄ is an important environmental and industrial goal which requires an understanding of the host–guest interactions involved at the atomic scale. Metal–organic polyhedra (MOPs) showing permanent porosity upon desolvation are rarely observed. We report a family of MOPs (Cu-1a, Cu-1b, Cu-2), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. Thus, for Cu-1a, the void fraction outside the cages totals 56% with only 2% within. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analyses. The exceptional stability of Cu-1a enables a detailed structural investigation into the adsorption of CO₂ and CH₄ using in situ X-ray and neutron diffraction, coupled with DFT calculations. The primary binding sites for adsorbed CO₂ and CH₄ in Cu-1a are found to be the open metal sites and pockets defined by the faces of phenyl rings. More importantly, the structural analysis of a hydrated sample of Cu-1a reveals a strong hydrogen bond between the adsorbed CO₂ molecule and the Cu(II)-bound water molecule, shedding light on previous empirical and theoretical observations that partial hydration of metal−organic framework (MOF) materials containing open metal sites increases their uptake of CO₂. The results of the crystallographic study on MOP–gas binding have been rationalized using DFT calculations, yielding individual binding energies for the various pore environments of Cu-1a.

We report a family of metal−organic polyhedra (MOP), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analysis. A detailed structural investigation into the adsorption of CO₂ and CH₄ is reported using in situ X-ray and neutron diffraction, coupled with DFT calculations.

Bimetallic metal-organic frameworks and their derivatives

Bimetallic metal-organic frameworks (MOFs) have two different metal ions in the inorganic nodes. According to the metal distribution, the architecture of bimetallic MOFs can be classified into two main categories namely solid solution and core-shell structures. Various strategies have been developed to prepare bimetallic MOFs with controlled compositions and structures. Bimetallic MOFs show a synergistic effect and enhanced properties compared to their monometallic counterparts and have found many applications in the fields of gas adsorption, catalysis, energy storage and conversion, and luminescence sensing. Moreover, bimetallic MOFs can serve as excellent precursors/templates for the synthesis of functional nanomaterials with controlled sizes, compositions, and structures. Bimetallic MOF derivatives show exposed active sites, good stability and conductivity, enabling them to extend their applications to the catalysis of more challenging reactions and electrochemical energy storage and conversion. This review provides an overview of the significant advances in the development of bimetallic MOFs and their derivatives with special emphases on their preparation and applications.

Novel CoNi-metal-organic framework crystal-derived CoNi@C: synthesis and effective cascade catalysis

Evaluating the catalytic influence of metal sites on derivates obtained from the calcination of metal-organic frameworks (MOFs) is very important for the rational construction of novel MOFs. Based on this catalytic functional guidance, two new Co-MOF and CoNi-MOF crystals were designed and synthesized, and further pyrolyzed to obtain corresponding porous carbon-based catalysts. Interestingly, the derivates exhibited better catalytic performance toward the tandem reaction of dehydrogenation of NH3BH3 and subsequent hydrogenation reduction of nitro/olefin compounds than those of the CoNi-ZIF (a star MOF)-derived CoNi@carbon and most metal catalysts. Significantly, the CoNi@C maintained excellent activity, even after 30 cycles, demonstrating its great longevity and durability, which are especially important for the practical application of metal catalysts in industrial catalysis.

Mixed-Metal MOFs: Unique Opportunities in Metal-Organic Framework (MOF) Functionality and Design

Mixed-metal metal-organic frameworks (MM-MOFs) can be considered to be those MOFs having two different metals anywhere in the structure. Herein we summarize the various strategies for the preparation of MM-MOFs and some of their applications in adsorption, gas separation, and catalysis. It is shown that compared to homometallic MOFs, MM-MOFs bring about the opportunity to take advantage of the complexity and the synergism derived from the presence of different metal ions in the structure of MOFs. This is reflected in a superior performance and even stability of MM-MOFs respect to related single-metal MOFs. Emphasis is made on the use of MM-MOFs as catalysts for tandem reactions.

Flexible N-Donor Ligands Direct the Structural Characteristics of CoII Complexes: Syntheses, Structures, and Magnetic Properties

Solvothermal reactions of 3,3′,5,5′-biphenyltetracarboxylic acid (H4BPTC) and cobalt(ii) ions in the presence of two different flexible N-donor ancillary ligands afford two novel coordination polymers, {[Co(BPTC)0.5(bix)]·H2O}n (1), {[Co(BPTC)0.5(bpp)]·3H2O}n (2) (bix=1,4-bis(imidazol-1-ylmethyl)benzene; bpp=1,3-bis(4-pyridyl)propane). Their structures have been determined by elemental analyses, IR spectra, single-crystal X-ray diffraction analyses, and powder X-ray diffraction. The pillared layered framework of 1 can be simplified to a (4,6)-connected net with a Schläfli symbol of (44·62)(44·69·82). Complex 2 manifests a bilayered structure, and can be simplified to a (4,4)-connected net with a Schläfli symbol of (55·8)(54·62). The thermal stabilities of both complexes and the magnetic behaviours of 1 are also discussed.

Mixed-metal metal–organic frameworks

Mixed-metal MOFs contain at least 2 different metal ions presenting promising potential in heterogeneous catalysis, gas sorption/separation, luminescence and sensing.

Preparation of metal–organic frameworks with bimetallic linkers and corresponding properties

A series of metal–organic frameworks (MOFs) with bimetallic linkers were synthesized through a facile reflux route.

Understanding the adsorption process in ZIF-8 using high pressure crystallography and computational modelling

Some porous crystalline solids change their structure upon guest inclusion. Unlocking the potential of these solids for a wide variety of applications requires full characterisation of the response to adsorption and the underlying framework–guest interactions. Here, we introduce an approach to understanding gas uptake in porous metal-organic frameworks (MOFs) by loading liquefied gases at GPa pressures inside the Zn-based framework ZIF-8. An integrated experimental and computational study using high-pressure crystallography, grand canonical Monte Carlo (GCMC) and periodic DFT simulations has revealed six symmetry-independent adsorption sites within the framework and a transition to a high-pressure phase. The cryogenic high-pressure loading method offers a different approach to obtaining atomistic detail on guest molecules. The GCMC simulations provide information on interaction energies of the adsorption sites allowing to classify the sites by energy. DFT calculations reveal the energy barrier of the transition to the high-pressure phase. This combination of techniques provides a holistic approach to understanding both structural and energetic changes upon adsorption in MOFs.

Understanding host–guest interactions and structural changes within porous materials is crucial for enhancing gas storage properties. Here, the authors combine cryogenic loading of gases with high pressure crystallography and computational techniques to obtain atomistic detail of adsorption-induced structural and energetic changes in ZIF-8.

Structural and dynamic studies of substrate binding in porous metal-organic frameworks

Porous metal-organic frameworks (MOFs) are the subject of considerable research interest because of their high porosity and capability of specific binding to small molecules, thus underpinning a wide range of materials functions such as gas adsorption, separation, drug delivery, catalysis, and sensing. MOFs, constructed by the designed assembly of metal ions and functional organic linkers, are an emerging class of porous materials with extended porous structures containing periodic binding sites. MOFs thus provide a new platform for the study of the chemistry and reactivity of small molecules in confined pores using advanced diffraction and spectroscopic techniques. In this review, we focus on recent progress in experimental investigations on the crystallographic, dynamic and kinetic aspects of substrate binding within porous MOFs. In particular, we focus on studies on host-guest interactions involving open metal sites or pendant functional groups in the pore as the primary binding sites for guest molecules.

Five transition metal coordination polymers driven by a semirigid trifunctional nicotinic acid ligand: selective adsorption and magnetic properties

Five coordination polymers have been synthesized by a new organic linker containing three distinct types of functional groups together with the mixed 2,2′-bipy or 4,4′-bipy co-ligand, revealing various framework structures and selective gas adsorption and magnetic properties.

MOF the beaten track: unusual structures and uncommon applications of metal-organic frameworks

Over the past few decades, metal-organic frameworks (MOFs) have proved themselves as strong contenders in the world of porous materials, standing alongside established classes of compounds such as zeolites and activated carbons. Following extensive investigation into the porosity of these materials and their gas uptake properties, the MOF community are now branching away from these heavily researched areas, and venturing into unexplored avenues. Ranging from novel synthetic routes to post-synthetic functionalisation of frameworks, host-guest properties to sensing abilities, this review takes a sidestep away from increasingly 'traditional' approaches in the field, and details some of the more curious qualities of this relatively young family of materials.

Stepwise observation and quantification and mixed matrix membrane separation of CO2 within a hydroxy-decorated porous host

The identification of preferred binding domains within a host structure provides important insights into the function of materials. State-of-the-art reports mostly focus on crystallographic studies of empty and single component guest-loaded host structures to determine the location of guests. However, measurements of material properties (e.g., adsorption and breakthrough of substrates) are usually performed for a wide range of pressure (guest coverage) and/or using multi-component gas mixtures. Here we report the development of a multifunctional gas dosing system for use in X-ray powder diffraction studies on Beamline I11 at Diamond Light Source. This facility is fully automated and enables in situ crystallographic studies of host structures under (i) unlimited target gas loadings and (ii) loading of multi-component gas mixtures. A proof-of-concept study was conducted on a hydroxyl-decorated porous material MFM-300(VIII) under (i) five different CO2 pressures covering the isotherm range and (ii) the loading of equimolar mixtures of CO2/N2. The study has successfully captured the structural dynamics underpinning CO2 uptake as a function of surface coverage. Moreover, MFM-300(VIII) was incorporated in a mixed matrix membrane (MMM) with PIM-1 in order to evaluate the CO2/N2 separation potential of this material. Gas permeation measurements on the MMM show a great improvement over the bare PIM-1 polymer for CO2/N2 separation based on the ideal selectivity.

Modulating supramolecular binding of carbon dioxide in a redox-active porous metal-organic framework

Hydrogen bonds dominate many chemical and biological processes, and chemical modification enables control and modulation of host–guest systems. Here we report a targeted modification of hydrogen bonding and its effect on guest binding in redox-active materials. MFM-300(V^III) {[V^III₂(OH)₂(L)], LH₄=biphenyl-3,3′,5,5′-tetracarboxylic acid} can be oxidized to isostructural MFM-300(V^IV), [V^IV₂O₂(L)], in which deprotonation of the bridging hydroxyl groups occurs. MFM-300(V^III) shows the second highest CO₂ uptake capacity in metal-organic framework materials at 298 K and 1 bar (6.0 mmol g⁻¹) and involves hydrogen bonding between the OH group of the host and the O-donor of CO₂, which binds in an end-on manner, =1.863(1) Å. In contrast, CO₂-loaded MFM-300(V^IV) shows CO₂ bound side-on to the oxy group and sandwiched between two phenyl groups involving a unique ···c.g._phenyl interaction [3.069(2), 3.146(3) Å]. The macroscopic packing of CO₂ in the pores is directly influenced by these primary binding sites.

Gaining molecular-level insight into host–guest binding interactions is fundamentally important, but experimentally challenging. Here, Schröder and co-workers study CO₂–host hydrogen bonding interactions in a pair of isostructural redox-active V^III/V^IV MOFs using neutron scattering and diffraction techniques.

Selective adsorption behaviour of carbon dioxide in OH-functionalized metal–organic framework materials

The theoretically optimal adsorption locations in hydroxyl (OH)-decorated metal–organic frameworks show that the captured CO₂ molecules interact with the cis-μ₂-OH groups in an end-on mode, which shows a moderate to weak hydrogen bond.

Selective Adsorption of Sulfur Dioxide in a Robust Metal-Organic Framework Material

Selective adsorption of SO₂ is realized in a porous metal-organic framework material, and in-depth structural and spectroscopic investigations using X-rays, infrared, and neutrons define the underlying interactions that cause SO₂ to bind more strongly than CO₂ and N₂ .

Mixed-metal or mixed-linker metal organic frameworks as heterogeneous catalysts

This review illustrates the recent developments in heterogeneous catalysis using mixed metal or mixed linker MOFs.