Tris(pentafluorophenyl)borane and Beyond: Modern Advances in Borylation Chemistry

Coordination of Al(C6F5)3 vs. B(C6F5)3 on group 6 end-on dinitrogen complexes: chemical and structural divergences

The coordination of the Lewis superacid tris(pentafluorophenyl)alane (AlCF) to phosphine-supported, group 6 bis(dinitrogen) complexes [ML2(N2)2] is explored, with M = Cr, Mo or W and L = dppe (1,2-bis(diphenylphosphino)ethane), depe (1,2-bis(diethylphosphino)ethane), dmpe (1,2-bis(dimethylphosphino)ethane) or 2 × PMe2Ph. Akin to tris(pentafluorophenyl)borane (BCF), AlCF can form 1 : 1 adducts by coordination to one distal nitrogen of general formula trans-[ML2(N2){(μ-η1:η1-N2)Al(C6F5)3}]. The boron and aluminium adducts are structurally similar, showing a comparable level of N2 push-pull activation. A notable exception is a bent (BCF adducts) vs. linear (AlCF adducts) M-N-N-LA motif (LA = Lewis acid), explained computationally as the result of steric repulsion. A striking difference arose when the formation of two-fold adducts was conducted. While in the case of BCF the 2 : 1 Lewis pairs could be observed in equilibrium with the 1 : 1 adduct and free borane but resisted isolation, AlCF forms robust 2 : 1 adducts trans-[ML2{(μ-η1:η1-N2)Al(C6F5)3}2] that isomerise into a more stable cis configuration. These compounds could be isolated and structurally characterized, and represent the first examples of trinuclear heterometallic complexes formed by Lewis acid-base interaction exhibiting p and d elements. Calculations also demonstrate that from the bare complex to the two-fold aluminium adduct, substantial decrease of the HOMO-LUMO gap is observed, and, unlike the trans adducts (1 : 1 and 1 : 2) for which the HOMO was computed to be a pure d orbital, the one of the cis-trinuclear compounds mixes a d orbital with a π* one of each N2 ligands. This may translate into a more favourable electrophilic attack on the N2 ligands instead of the metal centre, while a stabilized N2-centered LUMO should ease electron transfer, suggesting Lewis acids could be co-activators for electro-catalysed N2 reduction. Experimental UV-vis spectra for the tungsten family of compounds were compared with TD-DFT calculations (CAM-B3LYP/def2-TZVP), allowing to assign the low extinction bands found in the visible spectrum to unusual low-lying MLCT involving N2-centered orbitals. As significant red-shifts are observed upon LA coordination, this could have important implications for the development of visible light-driven nitrogen fixation.

Use of Microwave Dielectric Spectroscopy for the In Actu Assessment of Frustrated Lewis Pair Encounter Complexes

Frustrated Lewis pairs (FLPs) offer an important and promising paradigm for main group catalysis. Reported here is the use of microwave dielectric spectroscopy for the in actu detection of FLP encounter complexes. This technique focuses on the room-temperature measurement of the loss component of microwave permittivity (ε2) over the bandwidth from 0.5 to 6.8 GHz. The microwave loss measured for a Lewis pair in a toluene host solution is compared with the losses of the individual components when measured separately, and the difference in loss Δε2 is used to characterize the electrostatic interaction between the pair. The Δε2 value shows a direct correlation with an ability for the FLP encounter complex to split hydrogen gas and abstract hydrogen from γ-terpinene and has led to the identification of a novel FLP encounter complex, tris-pentafluorophenyl borane-eucalyptol pairing.

A Highly Sterically Encumbered Boron Lewis Acid Enabled by an Organotellurium-Based Ligand

Lewis acidic boron compounds are ubiquitous in chemistry due to their numerous applications, yet tuning and optimizing their properties towards different purposes is still a challenging field of research. In this work, the boron-based Lewis acid B[OTeF3(C6F5)2]3 was synthesized by reaction of the teflate derivative HOTeF3(C6F5)2 with BCl3 or BCl3 ⋅ SMe2. This new compound presents a remarkably high thermal stability up to 300 °C, as well as one of the most sterically encumbered boron centres known in the literature. Theoretical and experimental methods revealed that B[OTeF3(C6F5)2]3 exhibits a comparable Lewis acidity to that of the well-known B(C6F5)3. The affinity of B[OTeF3(C6F5)2]3 towards pyridine was accessed by Isothermal Titration Calorimetry (ITC) and compared to that of B(OTeF5)3 and B(C6F5)3. The ligand-transfer reactivity of this new boron compound towards different fluorides was demonstrated by the formation of an anionic Au(III) complex and a hypervalent iodine(III) species.

Hetero Diels-Alder reactions of isolable N-borylenamines

A new strategy for N-borylenamines by reaction of 2-alkynyl benzyl azides with B(C6F5)3 was developed. This novel 1,3-carboboration reaction proceeded via a 5-exo-dig cyclization/formal 1,1-carboboration/B(C6F5)2 shift reaction sequence. Additionally, N-borylenamines can undergo hetero Diels-Alder (HDA) reactions with a variety of dienophiles. Our results are an attractive complement to HDA reactions.

Zintl Clusters as a Platform for Lewis Acid Catalysis

Clusters of the main group elements phosphorus and arsenic, commonly categorized as Zintl clusters, have been known for over a century. And, only now is the application of these systems as catalysts for organic synthesis being investigated. In this work, boranes are tethered via an aliphatic linker to Zintl-based clusters and their Lewis acidity is examined experimentally, by the Gutmann-Beckett test and competency in the hydroborative reduction of six organic substrates, as well as computationally, by fluoride ion affinity and hydride ion affinity methods. The effects of tuning the aliphatic linker length, substituents at the boron, and changing the cluster from a seven-atom phosphorus system to a seven-atom arsenic system on reactivity are studied.

Magnetically Recyclable Borane Lewis Acid Catalyst for Hydrosilylation of Imines and Reductive Amination of Carbonyls

Fluorinated arylborane-based Lewis acid catalysts have shown remarkable activity and serve as ideal examples of transition metal-free catalysts for diverse organic transformations. However, their homogeneous nature poses challenges in terms of recyclability and separation from reaction mixtures. This work presents an efficient technique for the heterogenization of boron Lewis acid catalysts by anchoring Piers' borane to allyl-functionalized iron oxide. This catalyst demonstrates excellent activity in the hydrosilylation of imines and the reductive amination of carbonyls using various silanes as reducing agents under mild reaction conditions. The catalyst exhibits broad tolerance towards a wide range of functional substrates. Furthermore, it exhibits good recyclability and can be easily separated from the products using an external magnetic field. This work represents a significant advance in the development of sustainable heterogenous metal-free catalysts for organic transformations.

Formation of Strong Boron Lewis Acid Sites on Silica

Bis(1-methyl-ortho-carboranyl)borane (HBMeoCb2) is a very strong Lewis acid that reacts with the isolated silanols present on silica partially dehydroxylated at 700 °C (SiO2-700) to form the well-defined Lewis site MeoCb2B(OSi≡) (1) and H2. 11B{1H} magic-angle spinning (MAS) nuclear magnetic resonance (NMR) data of 1 are consistent with that of a three-coordinate boron site. Contacting 1 with O═PEt3 (triethylphosphine oxide TEPO) and measuring 31P{1H} MAS NMR spectra show that 1 preserves the strong Lewis acidity of HBMeoCb2. Hydride ion affinity and fluoride ion affinity calculations using small molecules analogs of 1 also support the strong Lewis acidity of the boron sites in this material. Reactions of 1 with Cp2Hf(13CH3)2 show that the Lewis sites are capable of abstracting methide groups from Hf to form [Cp2Hf-13CH3][H313C-B(MeoCb2)OSi≡], but with a low overall efficiency.

Juggling Optoelectronics and Catalysis: The Dual Talents of Bench Stable 1,4-Azaborinines

Boron- and nitrogen-doped polycyclic aromatic hydrocarbons (B-PAHs) have established a strong foothold in the realm of organic electronics. However, their catalytic potential remains largely untapped. In this study, we synthesise and characterise two bench stable B,N-doped PAH derivatives based on a 1,4-azaborinine motif. Most importantly, the anthracene derived structure is an efficient catalyst in the reduction of various carbonyls and imines. These results underscore the potential of B,N-PAHs in catalytic transformations, setting the stage for deeper exploration in this chemical space.

The Field of Main Group Lewis Acids and Lewis Superacids: Important Basics and Recent Developments

New developments in the field of Lewis acidity are highlighted, with the focus of novel Lewis acids and Lewis superacids of group 2, 13, 14, and 15 elements. Several important basics, illustrated by modern examples (classification of Donor-Acceptor (DA) complexes, amphoteric nature of any compound in terms of DA interactions, reorganization energies of main group Lewis acids and the role of the energies of frontier orbitals) are presented and discussed. It is emphasized that the Lewis acidity phenomena are general and play vital role in different areas of chemistry: from weak "atomophilic" interactions to the complexes of Lewis superacids.

Synthesis and Properties of Boron-Containing Heteromerous Bistricyclic Aromatic Enes: Structural Effects on Thermodynamic Stability and Photoreactivity

Overcrowded bistricyclic aromatic enes (BAEs) have several conformations such as twisted and anti-folded conformers, and their stereochemistry and chromism have been studied in earnest. In this study, boron-containing heteromerous BAEs having various tricyclic structures were synthesized and their photophysical properties investigated. Single-crystal X-ray analysis revealed that the introduction of a rigid fluorene unit resulted in a twisted conformer, whereas the introduction of flexible units such as thioxanthene and 9,9-dimethyl-9,10-dihydroanthracene units resulted in an anti-folded conformer. The absorption spectra of the heteromerous BAEs were dependent on the introduced tricyclic structures, suggesting the immense impact of the tricyclic structures on the electronic structures of BAEs. DFT calculations revealed the large effect of the flexibility of the tricyclic structures on the thermodynamic stability of the conformers. In addition, the boron-containing heteromerous BAEs underwent photocyclization reactions, indicating their potential application as precursors of polyaromatic hydrocarbons and helical aromatic materials.

B(C6 F5 )3 -Catalyzed [2+3]-Cyclative o,m-diC-H Functionalization of Phenols

Metal-free catalytic C-H functionalization is highly desired for the construction of C-C bonds. We herein report a highly chemoselective consecutive C-H [2+3]-cyclative functionalization for the simultaneous formation of two C-C bonds with construction of polycyclic phenols catalyzed by commercially available and low-cost B(C6 F5 )3 . This catalytic system tolerates a wide range of substrate scope, providing a series of 2,6,7,8-tetrahydroacenaphthylen-3-ol-type polycyclic compounds efficiently. Several derivatizations of the catalytic products have also been conducted to show the potential application of this method in synthesis of polycyclic compounds.

"Activated Borane": A Porous Borane Cluster Polymer as an Efficient Lewis Acid-Based Catalyst

Borane cluster-based porous covalent networks, named activated borane (ActB), were prepared by cothermolysis of decaborane(14) (nido-B10H14) and selected hydrocarbons (toluene, ActB-Tol; cyclohexane, ActB-cyHx; and n-hexane, ActB-nHx) under anaerobic conditions. These amorphous solid powders exhibit different textural and Lewis acid (LA) properties that vary depending on the nature of the constituent organic linker. For ActB-Tol, its LA strength even approaches that of the commonly used molecular LA, B(C6F5)3. Most notably, ActBs can act as heterogeneous LA catalysts in hydrosilylation/deoxygenation reactions with various carbonyl substrates as well as in the gas-phase dehydration of ethanol. These studies reveal the potential of ActBs in catalytic applications, showing (a) the possibility for tuning catalytic reaction outcomes (selectivity) in hydrosilylation/deoxygenation reactions by changing the material's composition and (b) the very high activity toward ethanol dehydration that exceeds the commonly used γ-Al2O3 by achieving a stable conversion of ∼93% with a selectivity for ethylene production of ∼78% during a 17 h continuous period on stream at 240 °C.

Quest for Active Species in Al/B-Catalyzed CO2 Hydrosilylation

We demonstrate the catalytic role of aluminum and boron centers in aluminum borohydride [(2-Me2CH2C6H4)(C6H5)Al(μ-H)2B(C6H5)2] (6) during carbon dioxide (CO2) hydrosilylation. Preliminary investigations into CO2 reduction using [(2-Me2NCH2C6H4)(H)Al(μ-H)]2 (1) and [Ph3C][B(3,5-C6H3Cl2)4] (2) in the presence of Et3SiH and PhSiH3 resulted in CH2(OSiR3)2 and CH3OSiR3, which serve as formaldehyde and methanol surrogates, respectively. In pursuit of identifying the active catalytic species, three compounds, B(3,5-C6H3Cl2)3 (3), [(2-Me2NCH2C6H4)(3,5-C6H3Cl2)Al(μ-H)2B(3,5-C6H3Cl2)2] (4), and [(2-Me2NCH2C6H4)2Al(THF)][B(3,5-C6H3Cl2)4] (5), were isolated. Among compounds 2-5, the highest catalytic conversion was achieved by 4. Further, 4 and 6 were prepared in a straightforward method by treating 1 with 3 and BPh3, respectively. 6 was found to be in equilibrium with 1 and BPh3, thus making the catalytic process of 6 more efficient than that of 4. Computational investigations inferred that CO2 reduction occurs across the Al-H bond, while Si-H activation occurs through a concerted mechanism involving an in situ generated aluminum formate species and BPh3.

Deoxyfluorination of 1°, 2°, and 3° Alcohols by Nonbasic O-H Activation and Lewis Acid-Catalyzed Fluoride Shuttling

A method for deoxyfluorination of aliphatic primary, secondary, and tertiary alcohols is reported, employing a nontrigonal phosphorus triamide for base-free alcohol activation in conjunction with an organic soluble fluoride donor and a triarylborane fluoride shuttling catalyst. Mechanistic experiments are consistent with a reaction that proceeds by the collapse of an oxyphosphonium fluoroborate ion pair with fluoride transfer. The substrate scope complements existing deoxyfluorination methods and enables the preparation of homochiral secondary and tertiary alkylfluorides by stereoinversion of the substrate alcohol.

The Effect of Carborane Substituents on the Lewis Acidity of Boranes

The Lewis acidity of primary, secondary, and tertiary boranes with phenyl, pentafluorophenyl, and all three isomers of the C-substituted icosahedral carboranes (ortho, meta, and para) was investigated by computing their fluoride, hydride, and ammonia affinities as well as their global electrophilicity indices and LUMO energies. From these calculations, it was determined that the substituent effects on the Lewis acidity of these boranes follow the trend of ortho-carborane > meta-carborane > para-carborane > C6F5 > C6H5.

Borane-Catalyzed C-F Bond Functionalization of gem-Difluorocyclopropenes Enables the Synthesis of Orphaned Cyclopropanes

Herein, we disclose an approach to synthesize tert-alkyl cyclopropanes by leveraging C-F bond functionalization of gem-difluorocyclopropenes using tris(pentafluorophenyl)borane catalysis. The reaction proceeds through the intermediacy of a fluorocyclopropenium ion, which was confirmed by the isolation of [Ph2(C6D5)C3]+[(C6F5)3BF]-. We found that silylketene acetal nucleophiles were optimal reaction partners with fluorocyclopropenium ion intermediates yielding fully substituted cyclopropenes functionalized with two α-tert-alkyl centers (63-93% yield). The regioselectivity of the addition to cyclopropenium ions is controlled by their steric and electronic properties and enables access to 3,3-bis(difluoromethyl)cyclopropenes in short order. The resulting cyclopropene products are readily reduced to the corresponding orphaned cyclopropanes under hydrogenation conditions. Quantum chemical calculations reveal the nature of the C-F bond cleavage steps and provide evidence for catalysis by boron and not silylated oxonium ions, though Si-F bond formation is the enthalpic driving force for the reaction.

Examining the reactivity of tris(ortho-carboranyl)borane with Lewis bases and application in frustrated Lewis pair Si-H bond cleavage

Reactions of tris(ortho-carboranyl)borane with Lewis bases reveals only small bases bind. The tremendous bulk and Lewis acidity is leveraged in frustrated Lewis pair Si-H cleavage with a wider range of Lewis bases and greater efficacy than B(C₆F₅)₃.

Haloboration of o-Alkynyl Phenols Generates Halogenated Bicyclic-Boronates

Benzoxaborinines are intermediates en-route to bicyclic boronates that are important active pharmaceutical ingredients (APIs). Herein, the haloboration of o-alkynyl-phenols using BX₃ (X=Cl or Br) is disclosed as a route to form C4-X-benzoxaborinines with good functional group tolerance. Computational studies indicated that there are two similar in barrier mechanisms: (i) double alkyne haloboration followed by retro-haloboration; (ii) concerted trans-haloboration involving an exogenous chloride source. The C4-halide in these benzoxaborinines is useful, with a one-pot haloboration-Negishi cross coupling protocol effective to form benzoxaborinines with an alkyl or an aryl at C4. Therefore this method is a useful addition to the toolbox for synthesising bicyclic-boronates that are attracting increasing attention as APIs.

An easy-to-perform evaluation of steric properties of Lewis acids

Steric and electronic effects play a very important role in chemistry, as these effects influence the shape and reactivity of molecules. Herein, an easy-to-perform approach to assess and quantify steric properties of Lewis acids with differently substituted Lewis acidic centers is reported. This model applies the concept of the percent buried volume (%V _Bur) to fluoride adducts of Lewis acids, as many fluoride adducts are crystallographically characterized and are frequently calculated to judge fluoride ion affinities (FIAs). Thus, data such as cartesian coordinates are often easily available. A list of 240 Lewis acids together with topographic steric maps and cartesian coordinates of an oriented molecule suitable for the SambVca 2.1 web application is provided, together with different FIA values taken from the literature. Diagrams of %V _Bur as a scale for steric demand vs. FIA as a scale for Lewis acidity provide valuable information about stereo-electronic properties of Lewis acids and an excellent evaluation of steric and electronic features of the Lewis acid under consideration. Furthermore, a novel LAB-Rep model (Lewis acid/base repulsion model) is introduced, which judges steric repulsion in Lewis acid/base pairs and helps to predict if an arbitrary pair of Lewis acid and Lewis base can form an adduct with respect to their steric properties. The reliability of this model was evaluated in four selected case studies, which demonstrate the versatility of this model. For this purpose, a user-friendly Excel spreadsheet was developed and is provided in the ESI, which works with listed buried volumes of Lewis acids %V _{Bur_LA} and of Lewis bases %V _{Bur_LB}, and no results from experimental crystal structures or quantum chemical calculations are necessary to evaluate steric repulsion in these Lewis acid/base pairs.

Synthesis and lewis acidity of fluorinated triaryl borates

A series of fluorinated triaryl borates B(OAr^F)₃ (Ar^F = 2-FC₆H₄, 3-FC₆H₄, 4-FC₆H₄, 2,4-F₂C₆H₃, 3,5-F₂C₆H₃, 2,3,4-F₃C₆H₂, 2,4,6-F₃C₆H₂, 3,4,5-F₃C₆H₂) have been prepared and isolated from the reactions of the mono-, di-, or tri-fluorophenol with BCl₃. The Lewis acidity of these borates has been determined by NMR spectroscopic and theoretical methods and compared to their well-established borane counterpart.

Triphenylborane in Metal-Free Catalysis

The development and application of new organoboron reagents as Lewis acids in synthesis and metal-free catalysis have dramatically expanded over the past 20 years. In this context, we will show the recent uses of the simple and relatively weak Lewis acid BPh₃-discovered 100 years ago-as a metal-free catalyst for various organic transformations. The first part will highlight catalytic applications in polymer synthesis such as the copolymerization of epoxides with CO₂, isocyanate, and organic anhydrides to various polycarbonate copolymers and controlled diblock copolymers as well as alternating polyurethanes. This is followed by a discussion of BPh₃ as a Lewis acid component in the frustrated Lewis pair (FLP) mediated cleavage of hydrogen and hydrogenation catalysis. In addition, BPh₃-catalyzed reductive N-methylations and C-methylations with CO₂ and silane to value-added organic products will be covered as well along with BPh₃-catalyzed cycloadditions and insertion reactions. Collectively, this mini-review showcases the underexplored potential of commercially available BPh₃ in metal-free catalysis.

Recent Advances in Asymmetric Catalysis Associated with B(C6F5)3

The prevalence and significance of asymmetric catalysis in the modern medicinal industry has been witnessed in recent years, which have already been used to manufacture the (S)-Naproxen and the (S)-Propranolol. With matched specificities such as the Lewis acidity and steric bulk, B(C₆F₅)₃ has gained accelerating attention on its application in asymmetric catalysis of Diels-Alder cycloaddition reactions, carbonyl-ene cyclization, and other various reactions, which have been demonstrated by the elegant examples from the most recent literature. Some significant progress in the reaction of indirect activation of substrates through in situ generation of numerous supramolecular catalysts from B(C₆F₅)₃ based on Lewis-acid-assisted Lewis acid (LLA) or Lewis acid assisted Brønsted acid (LBA) strategies or the reaction promoted by cooperative actions of chiral co-catalysts and B(C₆F₅)₃ which played a direct role on the activation of substrates have been demonstrated in this review.

Tris(ortho-carboranyl)borane: An Isolable, Halogen-Free, Lewis Superacid

The synthesis of tris(ortho-carboranyl)borane (BoCb₃ ), a single site neutral Lewis superacid, in one pot from commercially available materials is achieved. The high fluoride ion affinity (FIA) confirms its classification as a Lewis superacid and the Gutmann-Beckett method as well as adducts with Lewis bases indicate stronger Lewis acidity over the widely used fluorinated aryl boranes. The electron withdrawing effect of ortho-carborane and lack of pi-delocalization of the LUMO rationalize the unusually high Lewis acidity. Catalytic studies indicate that BoCb₃ is a superior catalyst for promoting C-F bond functionalization reactions than tris(pentafluorophenyl)borane [B(C₆ F₅ )₃ ].

B(C6 F5 )3 -Catalyzed E-Selective Isomerization of Alkenes

Herein, we report the B(C₆ F₅ )₃ -catalyzed E-selective isomerization of alkenes. The transition-metal-free method is applicable across a diverse array of readily accessible substrates, giving access to a broad range of synthetically useful products containing versatile stereodefined internal alkenes. The reaction mechanism was investigated by using synthetic and computational methods.

The ultimate Lewis acid catalyst: using tris(pentafluorophenyl) borane to create bespoke siloxane architectures

The breadth of utility of a commercially available and stable strong Lewis acid catalyst, tris(pentafluorophenyl)borane, has been explored, highlighting its use towards a wide range of unique siloxane products and their corresponding applications. This article focuses on the variety of different outcomes that this impressive borane offers in controlled and selective manners by the variation of reaction conditions, precursor functionalities, reagent or catalyst loading, and the mechanistic considerations that contribute. With a predominant focus on the Piers-Rubinsztajn reaction and its modifications, tris(pentaflurophenyl)borane's utility is highlighted in the synthesis of linear, cyclic and macrocyclic siloxanes, aryl-/alkoxysiloxanes, and other bespoke products. The significance of the catalytic transformation within the field of siloxane chemistry is discussed alongside some of the challenges that arise from using the borane catalyst.

Borane-catalyzed arylation of aryldiazoacetates with N,N-dialkylanilines

A selective arylation of donor-acceptor diazo compounds with aniline derivatives catalyzed by Lewis acidic boranes is developed. This simple reaction protocol provides an efficient method for the synthesis of diarylacetates under metal-free conditions.

Isolable fluorinated triphenylmethyl cation salts of [HCB11Cl11]-: demonstration of remarkable hydride affinity

Significantly fluorinated triarylmethyl cations have long attracted attention as potentially accessible highly reactive carbocations, but their isolation in a convenient form has proved elusive. We show that abstraction of chloride with a cationic silylium reagent leads to the facile formation of di-, tetra-, and hexafluorinated trityl cations, which could be isolated as analytically pure salts with the [HCB₁₁Cl₁₁]^- counterion and are compatible with (halo)arene solvents. The F₆Tr⁺ cation carrying six meta-F substituents was computationally predicted to possess up to 20% higher hydride affinity than the parent triphenylmethyl cation Tr⁺. We report that indeed F₆Tr⁺ displays reactivity unmatched by Tr⁺. F₆Tr⁺ at ambient temperature abstracts hydrides from the C-H bonds in tetraethylsilane, mesitylene, methylcyclohexane, and catalyzes Friedel-Crafts alkylation of arenes with ethylene, while Tr⁺ does none of these.

Ferrocene tethered boramidinate frustrated Lewis pairs: stepwise capture of CO2 and CO

The synthesis and reactivity of novel ferrocene tethered boramidinate frustrated Lewis pairs (FLPs), capable of the sequential capture of small molecules, is reported. Reactions of 1,1'-dicarbodiimidoferrocenes with different boranes provides access to metallocene tethered FLPs. The reactivity of the boramidinate moieties can be tuned by the nature of the carbodiimido substituents (alkyl vs. aryl) and the borane used in the reduction (9-borabicyclo[3.3.1]nonane [(C₈H₁₄)₂BH]₂vs. bis-pentafluorophenyl borane [(C₆F₅)₂BH]₂). The boramidinate FLP arms do not engage in intramolecular reactions, allowing for independent small molecule capture by each FLP. By careful synthetic control, sequential capture of different gaseous small molecules (CO₂ and CO or CO₂ and CNtBu) by the same bis(boramidinate)ferrocene molecule has been demonstrated.

Directed Synthesis and Chemistry of Unsymmetric Dicationic Diboranes and Their Use in Frustrated Lewis Pair‐like Chemistry

The chemistry of dicationic diboranes with two B^II atoms that are engaged in direct B−B bonding is by enlarge unexplored, although these molecules have intriguing properties due to their combined Lewis acidic and electron‐donor properties. Unsymmetric dicationic diboranes are extremely rare, but especially attractive due to their polarized B−B bond. In this work we report the directed synthesis of several stable unsymmetric dicationic diboranes by reaction between the electron‐rich ditriflato‐diborane B₂(hpp)₂(OTf)₂ (hpp=1,3,4,6,7,8‐hexahydro‐2H‐pyrimido[1,2‐α]pyrimidinate) and phosphino‐pyridines, establishing B−N and B−P bonds with the diborane concomitant with triflate elimination. In the case of 2‐((ditertbutylphosphino)methyl)pyridine, the B−N bond is formed instantly, but the B−P bond formation requires (due to steric constraints) several days at ambient conditions for completion, creating an intermediate that could be used for frustrated Lewis pair (FLP)‐like chemistry. Here we test its reaction with an aldehyde, and propose a new type of FLP‐like chemistry.

Mechanistic Insight into Hydroboration of Imines from Combined Computational and Experimental Studies

Boron Lewis acid-catalyzed and catalyst-free hydroboration reactions of imines are attractive due to the mild reaction conditions. In this work, the mechanistic details of the hydroboration reactions of two different kinds of imines with pinacolborane (HBpin) are investigated by combining density functional theory calculations and some experimental studies. For the hydroboration reaction of N-(α-methylbenzylidene)aniline catalyzed by tris[3,5-bis(trifluoromethyl)phenyl]borane (BAr^F ₃ ), our calculations show that the reaction proceeds through a boron Lewis acid-promoted hydride transfer mechanism rather than the classical Lewis acid activation mechanism. For the catalyst- and solvent-free hydroboration reaction of imine, N-benzylideneaniline, our calculations and experimental studies indicate that this reaction is difficult to occur under the reaction conditions reported previously. With a combination of computational and experimental studies, we have established that the commercially available BH₃  ⋅ SMe₂ can serve as an efficient catalyst for the hydroboration reactions of N-benzylideneaniline and similar imines. The hydroboration reactions catalyzed by BH₃  ⋅ SMe₂ are most likely to proceed through a hydroboration/B-H/B-N σ-bond metathesis pathway, which is very different from that of the reaction catalyzed by BAr^F ₃ .

Borane-Catalyzed Dehydrogenative C‒C Bond Formation of Indoles with N-Tosylhydrazones: An Experimental and Computational Study

A novel dehydrogenative C‒C bond formation of indoles and N-tosylhydrazones to di(indolyl)methanes (DIMs) has been demonstrated using tris(pentafluorophenyl)borane as catalyst. A wide range of functional groups can be tolerated under...

Bringing out the potential of organoboron compounds by designing the chemical bonds and spaces around boron

Since the structures, reactivity and properties of organoboron compounds stem from the electron deficiency and low electronegativity of boron, the design of the chemical bonds attached to boron as well...

Convenient and accurate insight into solution-phase equilibria from FlowNMR titrations

Solution phase titrations are made easy by multi-nuclear FlowNMR spectroscopy with automated, continuous titre addition to give accurate insights into Brønsted acid/base, hydrogen bonding, Lewis acid/base and metal/ligand binding equilibria under native conditions.

Borane-catalyzed cascade Friedel–Crafts alkylation/[1,5]-hydride transfer/Mannich cyclization to afford tetrahydroquinolines

We report a redox-neutral annulation reaction of tertiary amines with electron-deficient alkynes under metal-free and oxidant-free conditions.

Boron-Based Lewis Acid Catalysis: Challenges and Perspectives

In the last two decades, boron-based catalysis has been gaining increasing traction in the field of organic synthesis. The use of halogenated triarylboranes as main group Lewis acid catalysts is an attractive strategy. It has been applied in a growing number of transformations over the years, where they may perform comparably or even better than the gold standard catalysts. This review discusses methods of borane synthesis and cutting-edge boron-based Lewis acid catalysis, focusing especially on tris(pentafluorophenyl)-borane [B(C6F5)3], and other halogenated triarylboranes, highlighting how boron Lewis acids employed as catalysts can unlock a plethora of unprecedented chemical transformations or improve the efficiency of existing reactions.

[Mes-B-TMP]+ borinium cation initiated cyanosilylation and catalysed hydrosilylation of ketones and aldehydes

Two aryl amino borinium cations derived from Cl(Mes)B-NR₂ (NR₂ = TMP, HMDS) faced divergent outcomes. As the HMDS-substituted one underwent methyl migration from silicon to boron transforming the putative borinium ion to a silylium ion, [Mes-B-TMP]⁺ can initiate cyanosilylation and catalyse hydrosilylation of ketones and aldehydes.

Carboboration-Driven Generation of a Silylium Ion for Vinylic C-F Bond Functionalization by B(C6 F5 )3 Catalysis

Strong main-group Lewis acids such as silylium ions are known to effectively promote heterolytic C(sp³ )-F bond cleavage. However, carrying out the C(sp² )-F bond transformation of vinylic C-F bonds has remained an unmet challenge. Herein, we describe our development of a new and simple strategy for vinylic C-F bond transformation of α-fluorostyrenes with silyl ketene acetals catalyzed by B(C₆ F₅ )₃ under mild conditions. Our theoretical calculations revealed that a stabilized silylium ion, which is generated from silyl ketene acetals by carboboration, cleaves the C-F bond of α-fluorostyrenes. A comparative study of α-chloro or bromostyrenes demonstrated that our reaction can be applied only to α-fluorostyrenes because the strong silicon-fluorine affinity facilitates an intramolecular interaction of silylium ions with fluorine atom to cleave the C-F bond. A broad range of α-fluorostyrenes as well as a range of silyl ketene acetals underwent this C-F bond transformation.