Fabrication of Hierarchical Two-Dimensional MoS2 Nanoflowers Decorated upon Cubic CaIn2S4 Microflowers: Facile Approach To Construct Novel Metal-Free p–n Heterojunction Semiconductors with Superior Charge Separation Efficiency

Augmented photocatalysis induced by 1T-MoS2 bridged 2D/2D MgIn2S4@1T/2H-MoS2 Z-scheme heterojunction: mechanistic insights into H2O2 and H2 evolution

In the realm of composite photocatalysts, the fusion of the co-catalyst effect with interfacial engineering is recognized as a potent strategy for facilitating the segregation and migration of photo-induced charge carriers. Herein, an innovative mediator-based Z-scheme hybrid, i.e. MIS@1T/2H-MoS2, has been well designed by pairing MIS with 1T/2H-MoS2via a facile hydrothermal strategy as a competent photocatalyst for H2O2 and H2 generation. The co-catalyst, i.e. metallic 1T-phase bridging between semiconducting 2H-MoS2 and MIS, serves as a solid state electron mediator in the heterostructure. Morphological findings revealed the growth of 1T/2H-MoS2 nanoflowers over MIS microflowers, verifying the close interaction between MIS and 1T/2H-MoS2. By virtue of accelerated e-/h+ pair separation and migration efficiency along with a proliferated density of active sites, the MMoS2-30 photocatalyst yields an optimum H2O2 of 35 μmol h-1 and H2 of 370 μmol h-1 (ACE of 5.9%), which is 3 and 2.7 fold higher than pristine MIS. This obvious enhancement can be attributed to photoluminescence and electrochemical aspects that substantiate the diminished charge transfer resistance along with improved charge carrier separation, representing a good example of a noble metal-free photocatalyst. The proposed Z-scheme charge transfer mechanism is aided by time-resolved photoluminescence (TRPL), XPS, radical trapping experiments, and EPR analysis. Overall, this endeavour provides advanced insights into the architecture of noble metal-free Z-scheme heterostructures, offering promising prospects in photocatalytic applications.

A 3D hierarchical TiO2/CaIn2S4/C3N4arrays photoanode with dual-heterojunction for enhanced photoelectrochemical performance

A novel 3D hierarchical TiO2/CaIn2S4/C3N4arrays with dual heterojunctions photoanode is constructed by stepwise deposition of CaIn2S4nanosheets and ultrathin C3N4onto the well-aligned TiO2nanorods arrays. Integrating the merit of the superior ability of CaIn2S4and C3N4to harvest visible light, dual type-Ⅱ heterojunction band structure and one-dimensional ordered nanostructures, the TiO2/CaIn2S4/C3N4photoanode exhibits simultaneous significant improvements in visible-light harvesting, charge separation and electron transfer capability. At 1.23 V (versus reversible hydrogen electrode) under AM 1.5 G irradiation, the TiO2/CaIn2S475/C3N4photoanode exhibits a photocurrent density of 4.5 mA cm-2, which is 5.2 and 51.1-fold higher than that of TiO2/CaIn2S475 and pristine TiO2photoanode, respectively. Moreover, the applied bias photo-to-current efficiency (ABPE) of the TiO2/CaIn2S475/C3N4photoanode reaches 3.5% at 0.36 V (versus reversible hydrogen electrode). These results are helpful for fabricating more efficient heterostructure photoelectrodes.

MoS2-Based Nanocomposites for Photocatalytic Hydrogen Evolution and Carbon Dioxide Reduction

Photocatalysis is a facile and sustainable approach for energy conversion and environmental remediation by generating solar fuels from water splitting. Due to their two-dimensional (2D) layered structure and excellent physicochemical properties, molybdenum disulfide (MoS₂) has been effectively utilized in photocatalytic H₂ evolution reaction (HER) and CO₂ reduction. The photocatalytic efficiency of MoS₂ greatly depends on the active edge sites present in their layered structure. Modifications like reducing the layer numbers, creating defective structures, and adopting different morphologies produce more unsaturated S atoms as active edge sites. Hence, MoS₂ acts as a cocatalyst in nanocomposites/heterojunctions to facilitate the photogenerated electron transfer. This review highlights the role of MoS₂ as a cocatalyst for nanocomposites in H₂ evolution reaction and CO₂ reduction. The H₂ evolution activity has been described comprehensively as binary (with metal oxide, carbonaceous materials, metal sulfides, and metal-organic frameworks) and ternary composites of MoS₂. Photocatalytic CO₂ reduction is a more complex and challenging process that demands an efficient light-responsive semiconductor catalyst to tackle the thermodynamic and kinetic factors. Photocatalytic reduction of CO₂ using MoS₂ is an emerging topic and would be a cost-effective substitute for noble catalysts. Herein, we also exclusively envisioned the possibility of layered MoS₂ and its composites in this area. This review is expected to furnish an understanding of the diverse roles of MoS₂ in solar fuel generation, thus endorsing an interest in utilizing this unique layered structure to create nanostructures for future energy applications.

MgIn2S4/UiO-66-NH2 MOF-Based Heterostructure: Visible-Light-Responsive Z-Scheme-Mediated Synergistically Enhanced Photocatalytic Performance toward Hydrogen and Oxygen Evolution

Hydrogen and oxygen evolution via photocatalytic water splitting remains the quintessential alternative to fossil fuels. Photocatalysts must be sufficiently robust, competent, and productive toward harnessing sunlight in order to utilize the solar spectrum for maximal photocatalytic output. Herein, we have fabricated the MgIn₂S₄/UiO-66-NH₂ composite via a facile solvothermal route and have determined its efficacy toward light-induced H₂ and O₂ generation reactions through water splitting with the aid of different sacrificial agents. Initially, the formation of pristine and composite materials was ascertained by PXRD, FTIR, etc. Moreover, with the aid of sophisticated morphological characterization techniques (FESEM and HRTEM), the intricate interaction between MgIn₂S₄ and UiO-66-NH₂ was revealed. Additionally, the XPS studies suggested the effective interaction between the individual components with binding energy shifting suggesting the transfer of electrons from Zr-MOF to MgIn₂S₄. The PL and electrochemical aspects supported the effective photogenerated charge segregation in the prepared composite leading to superior photocatalytic outputs. Amidst the prepared composites of (3, 5, and 7 wt %) MgIn₂S₄/UiO-66-NH₂, the 5 wt % or UM-2 composite displays optimal H₂ and O₂ evolution performances of 493.8 and 258.6 μmol h^-1 (4-fold greater than for pristine MgIn₂S₄ and UiO-66-NH₂), respectively. The nanocomposite's enhanced performance is indeed a consequence of the coadjuvant interaction among pristine UiO-66-NH₂ and MgIn₂S₄ components that transpires via the Z-scheme-mediated charge transfer by enabling facile exciton segregation and channelization. Moreover, the composite inherited the remarkable framework stability of parent Zr-MOF, and the MgIn₂S₄ insertion had a negligible impact on the framework integrity. This work will offer a valuable model for developing robust Zr-MOF-based nanocomposite photocatalysts and evaluating their superior performance toward photocatalytic water redox reactions.

Interface Engineering in 2D/2D Heterogeneous Photocatalysts

Assembling different 2D nanomaterials into heterostructures with strong interfacial interactions presents a promising approach for novel artificial photocatalytic materials. Chemically implementing the 2D nanomaterials' construction/stacking modes to regulate different interfaces can extend their functionalities and achieve good performance. Herein, based on different fundamental principles and photochemical processes, multiple construction modes (e.g., face-to-face, edge-to-face, interface-to-face, edge-to-edge) are overviewed systematically with emphasis on the relationships between their interfacial characteristics (e.g., point, linear, planar), synthetic strategies (e.g., in situ growth, ex situ assembly), and enhanced applications to achieve precise regulation. Meanwhile, recent efforts for enhancing photocatalytic performances of 2D/2D heterostructures are summarized from the critical factors of enhancing visible light absorption, accelerating charge transfer/separation, and introducing novel active sites. Notably, the crucial roles of surface defects, cocatalysts, and surface modification for photocatalytic performance optimization of 2D/2D heterostructures are also discussed based on the synergistic effect of optimization engineering and heterogeneous interfaces. Finally, perspectives and challenges are proposed to emphasize future opportunities for expanding 2D/2D heterostructures for photocatalysis.

Hydrolytically stable mixed ditopic linker based zirconium metal organic framework as a robust photocatalyst towards Tetracycline Hydrochloride degradation and hydrogen evolution

In the existing eco-crisis, designing and engineering an efficient as well as water stable photocatalyst for energy conversion and pollutant abatement remains crucial. In this regard, a mixed linker type zirconium metal organic framework (Zr-MOF) with terepthalic acid based ditopic linkers were utilized to design a single component photocatalyst through single step solvothermal method to utilize photons from visible light illumination towards hydrogen energy (H2) production and Tetracycline Hydrochloride (TCH) degradation. The one pot synthesized mixed linker based Zr-MOF displays visible light absorption through band gap tuning, superior exciton segregation and oxygen vacancy that cumulatively supports the enhancement in the photocatalytic output with respect to their pristine counterparts. Additionally, the X-ray photoelectron spectroscopy, optical and electrochemical studies strongly reinforces the above claims. The prepared mixed linker Zr-MOF showed superior photocatalytic H2 evolution performance of 247.88 µmol h-1 (apparent conversion efficiency; ACE = 1.9%) that is twice than its pristine Zr-MOFs. Moreover, in TCH degradation, the mixed linker MOF displays an enhanced efficacy of 91.8 % and adopts pseudo-first order type kinetics with a rate constant value of 0.032. Typically, the active species participating for the TCH photo-degradation follows the order of hydroxyl (OH.) < superoxide (O2.-) radicals. Consequently, the mixed linker Zr-MOF could be effectively used as a robust photocatalyst exhibiting boosted TCH degradation and H2 production.

Transition Metal Dichalcogenides [MX2] in Photocatalytic Water Splitting

The quest for a clean, renewable and sustainable energy future has been highly sought for by the scientific community over the last four decades. Photocatalytic water splitting is a very promising technology to proffer a solution to present day environmental pollution and energy crises by generating hydrogen fuel through a “green route” without environmental pollution. Transition metal dichalcogenides (TMDCs) have outstanding properties which make them show great potential as effective co-catalysts with photocatalytic materials such as TiO2, ZnO and CdS for photocatalytic water splitting. Integration of TMDCs with a photocatalyst such as TiO2 provides novel nanohybrid composite materials with outstanding characteristics. In this review, we present the current state of research in the application of TMDCs in photocatalytic water splitting. Three main aspects which consider their properties, advances in the synthesis routes of layered TMDCs and their composites as well as their photocatalytic performances in the water splitting reaction are discussed. Finally, we raise some challenges and perspectives in their future application as materials for water-splitting photocatalysts.

Rationally designed Ti3C2/N, S-TiO2/g-C3N4 ternary heterostructure with spatial charge separation for enhanced photocatalytic hydrogen evolution

The charge separation and transfer are the major issues dominating the under-laying energy conversion mechanism for photocatalytic system. Construction of semiconductor-based heterojunction system considered to be viable option for boosting the spatial charge separation and transfer in the photocatalytic water splitting system. Here, we design a ternary heterojunction of Ti₃C₂/N, S-TiO₂/g-C₃N₄ by thermal annealing and ultrasonic assisted impregnation method having a well-designed n-n heterojunction and noble metal free Schottky junction for adequate hydrogen evolution. The optimal content of 4 wt% Ti₃C₂ on N, S-TiO₂/g-C₃N₄ (4-TC/NST/CN) exhibit the highest rate of hydrogen generation 495.06μ mol h^-1 which is 3.1, 4.1 and 1.6 fold higher than the pristine N, S doped-TiO₂, g-C₃N₄ and binary hybrid (N, S doped-TiO₂/g-C₃N₄) respectively, with 7% apparent conversion efficiency (ACE). The increment in the activity is described to the robust photogenerated carrier separation and double charge transfer channels because of the formation of dual heterojunction (n-n heterojunction and Schottky junction). XRD and Raman results revealed the occupancy of Ti₃C₂ in the heterojunction due to the strong interaction between Ti₃C_2, with N, S doped-TiO₂ and g-C₃N₄. The HRTEM analysis confirmed the formation of close interfacial junction between the Ti₃C₂, N, S doped-TiO₂ and g-C₃N₄. Moreover, the higher photocurrent, low PL intensity and lower impedance arc suggested the lower charge carrier recombination rate in 4-TC/NST/CN heterojunction. This work represents a significant development to establish a sound foundation for future design of MXene-based ternary hybrid system towards significant charge carrier separation and transfer for H₂ production activity.

A solution-processed octahedral nano-blocks structure CaIn2S4film for UV/vis photodetection

A novel CaIn₂S₄with three-dimensional octahedral nano-blocks (ONBs) are successfully synthesized on fluorine-doped tin oxide (FTO) substrate by a simple hydrothermal method. The CaIn₂S₄ONBs are uniform grown and scattered on the whole FTO substrate with high regular and symmetric morphology as well as average diagonal length of about 600 nm. Based on the as-synthesized CaIn₂S₄ONBs, a photodetector (PD) is fabricated. Satisfyingly, it is found that the CaIn₂S₄ONBs PD achieves a broad-band response ranging from ultraviolet (UV) to visible ( vis) light at zero bias voltage. It is also significant that the CaIn₂S₄ONBs PD enables a fast response, in which the rise time and decay time are less than 0.15 and 0.2 s, respectively. Furthermore, the morphological evolution of the CaIn₂S₄ONBs and plausible UV/vis detection mechanism of the CaIn₂S₄ONBs PD are discussed.

Fabrication of a ternary NiS/ZnIn2S4/g-C3N4 photocatalyst with dual charge transfer channels towards efficient H2 evolution

As a renewable green energy, hydrogen has received widespread attention due to its huge potential in solving energy shortages and environment pollution. In this paper, a one-step solvothermal method was applied to grow ultra-thin g-C₃N₄ (UCN) nanosheets and NiS nanoparticles on the surface of ZnIn₂S₄ (ZIS). A ternary NiS/ZnIn₂S₄/ultra-thin-g-C₃N₄ composite material with dual high-speed charge transfer channels was constructed for the advancement of the photocatalytic H₂ generation. The optimal ternary catalyst 1.5wt.%NiS/ZnIn₂S₄/ultra-thin-g-C₃N₄ (NiS/ZIS/UCN) achieved a H₂ evolution yield reached to 5.02 mmolg^-1h^-1, which was 5.23 times superior than that of pristine ZnIn₂S₄ (0.96 mmolg^-1h^-1) and even outperform than that of the best precious metal modified 3.0 wt%Pt/ZnIn₂S₄ (4.08 mmolg^-1h^-1). The AQY at 420 nm could be achieved as high as 30.5%. The increased photocatalytic performance of NiS/ZIS/UCN could be ascribed to the type-I heterojunctions between intimated ZIS and UCN. In addition, NiS co-catalyst with large quantity of H₂ evolution sites, could result in efficient photo-induced charges separation and migration. Furthermore, the NiS/ZIS/UCN composite exhibited excellent H₂ evolution stability and recyclability. This work would also offer a reference for the design and synthesis of ternary co-catalyst with heterojunction composite for green energy conversion.

Mixed-Valence Bimetallic Ce/Zr MOF-Based Nanoarchitecture: A Visible-Light-Active Photocatalyst for Ciprofloxacin Degradation and Hydrogen Evolution

A mixed-valency bimetallic Ce/Zr MOF with Ce³⁺/Ce⁴⁺ ions incorporated and an oxygen vacancy-rich single-component photocatalyst have been designed through the one-step solvothermal route to harness photons from the visible-light spectrum for green energy (H₂) generation and ciprofloxacin (CIP) degradation. The one-pot-engineered bimetallic Ce/Zr MOF shows visible-light-active characteristics accompanied by a narrower band gap, along with enhanced exciton separation and superior ligand-to-metal charge transfer (LMCT), due to the presence of an interconvertible Ce³⁺/Ce⁴⁺ ions pair in comparison to its pristine MOF counterpart. The Ce ion insertion led to increase in electron density around the Zr⁴⁺ ion, along with generation of some oxygen vacancies (OV), which cumulatively led to the rise in the photo-reaction output. The synthesized UNH (Ce/Zr 1:1) MOF displayed a boosted photocatalytic H₂ production rate of 468.30 μmol h^-1 (ACE = 3.51%), which is around fourfolds higher than that of pristine MOFs. Moreover, for CIP photodegradation, the UNH (Ce/Zr 1:1) shows an enhanced efficiency of 90.8% and follows pseudo-first-order kinetics with a rate constant of 0.0363. Typically, the active species involved in the photo-redox reaction of the CIP photodegradation follows the order hydroxyl radical (OH^•) < superoxide radical (O₂^•-), as confirmed by the TA and NBT tests. Consequently, the bimetallic Ce/Zr MOF can be readily employed as a robust photocatalyst with enhanced tendencies towards CIP degradation and H₂ evolution.

Robust direct Z-scheme exciton transfer dynamics by architecting 3D BiOI MF-supported non-stoichiometric Cu0.75In0.25S NC nanocomposite for co-catalyst-free photocatalytic hydrogen evolution

Designing promising photocatalytic systems with wide photon absorption and better exciton separation ability is a cutting-edge technology for enhanced solar-light-driven hydrogen production. In this context, non-stoichiometric Cu0.75In0.25S nanocrystals (CIS NCs) coupled with three-dimensional (3D) BiOI micro-flowers (BOI MFs) were synthesized through an ultra-sonication strategy forming a CIS-BOI heterojunction, which was well supported by XRD, photocurrent, XPS and Mott-Schottky analyses. Further, the co-catalyst-free CIS-BOI binary hybrid shows improved hydrogen evolution, i.e., 588.72 μmol h-1, which is 3.2 times greater than the pristine CIS NC (183.97 μmol h-1). Additionally, the binary composite confers an apparent conversion efficiency (ACE) of 9.44% (8.90 × 1016 number of H2 molecule per sec), which is extensively attributed to the robust charge carrier separation and transfer efficiency via the direct Z-scheme mechanism (proved through superoxide and H2 evolution activity). Moreover, the broad photon absorption range and productive exciton separation over the CIS-BOI composite are substantially justified by UV-Vis DRS, PL, EIS and photocurrent measurements.

Tailoring the fusion effect of phase-engineered 1T/2H-MoS2 towards photocatalytic hydrogen evolution

Enhanced photocatalytic hydrogen evolution on 30-1T/2H-MoS2 with a higher concentration of the 1T phase was achieved due to the higher availability of electrons and dense active sites after the incorporation of the 1T phase in 2H-MoS2.

Thermocatalytic Hydrogen Production Through Decomposition of Methane-A Review

Consumption of fossil fuels, especially in transport and energy-dependent sectors, has led to large greenhouse gas production. Hydrogen is an exciting energy source that can serve our energy purposes and decrease toxic waste production. Decomposition of methane yields hydrogen devoid of COx components, thereby aiding as an eco-friendly approach towards large-scale hydrogen production. This review article is focused on hydrogen production through thermocatalytic methane decomposition (TMD) for hydrogen production. The thermodynamics of this approach has been highlighted. Various methods of hydrogen production from fossil fuels and renewable resources were discussed. Methods including steam methane reforming, partial oxidation of methane, auto thermal reforming, direct biomass gasification, thermal water splitting, methane pyrolysis, aqueous reforming, and coal gasification have been reported in this article. A detailed overview of the different types of catalysts available, the reasons behind their deactivation, and their possible regeneration methods were discussed. Finally, we presented the challenges and future perspectives for hydrogen production via TMD. This review concluded that among all catalysts, nickel, ruthenium and platinum-based catalysts show the highest activity and catalytic efficiency and gave carbon-free hydrogen products during the TMD process. However, their rapid deactivation at high temperatures still needs the attention of the scientific community.

Ultrahigh Charge Separation Achieved by Selective Growth of Bi4O5I2 Nanoplates on Electron-Accumulating Facets of Bi5O7I Nanobelts

Ultrahigh charge separation was observed in Bi₄O₅I₂/Bi₅O₇I two-dimensional (2D)/one-dimensional (1D) hierarchical structures (HSs) constructed by selective growth of 2D monocrystalline Bi₄O₅I₂ nanoplates on the electron-accumulating (100) facet of 1D monocrystalline Bi₅O₇I nanobelts. In addition to the presence of type-II heterojunction between Bi₄O₅I₂ and Bi₅O₇I elementary entities in 2D/1D HSs, the type-II (100)/(001) surface heterojunction in Bi₅O₇I nanobelt substrates was also confirmed by means of density functional theory (DFT) calculations and selective photoreduction/oxidation deposition experiments. The synergistic effect of two kinds of heterojunctions in Bi₄O₅I₂/Bi₅O₇I 2D/1D HSs endowed them with ultrahigh charge carrier separation and transfer characteristics. In contrast with the control sample (BB40-C) constructed by growing Bi₄O₅I₂ nanoplates on whole four sides of Bi₅O₇I nanobelts, Bi₄O₅I₂/Bi₅O₇I 2D/1D HSs demonstrated significantly enhanced charge transfer between Bi₅O₇I nanobelt substrates and Bi₄O₅I₂ nanoplates, owing to respective electron and hole accumulations on (100) and (001) facets of Bi₅O₇I substrates caused by (100)/(001) surface heterojunction. The enhanced separation behavior was successfully verified by steady/transient-state photoluminescence, electrochemical techniques, and photocatalytic degradation experiments. Based on the above effective charge separation of Bi₄O₅I₂/Bi₅O₇I 2D/1D HSs as well as the routine advantages for 2D/1D HSs, such as the excellent charge transport in monocrystalline elementary entities, much higher specific surface area, and enhanced light absorption by multiple reflections, the optimal BB40 HSs demonstrated ultrahigh photocatalytic performance than the control samples, whose apparent rates for Rhodamine B [or tetracycline hydrochloride (TC)] degradation were 7.1 (2.9 for TC), 10.3 (4.7 for TC), and 2.2 (1.7 for TC) times those of pristine Bi₅O₇I nanobelts, Bi₄O₅I₂ nanoplates, and BB40-C, respectively. It is hoped that this crystal facet selection during the heterostructure construction in this work could provide a new strategy or some enlightenment for the exploration of highly active 2D/1D HSs or other-dimensional heterostructure nanomaterials applied in the fields of photocatalysts, solar cells, sensors, and others.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

A review on vertical and lateral heterostructures of semiconducting 2D-MoS2 with other 2D materials: a feasible perspective for energy conversion

Fossil fuels as a double-edged sword are essential to daily life. However, the depletion of fossil fuel reservoirs has increased the search for alternative renewable energy sources to procure a more sustainable society. Accordingly, energy production through water splitting, CO₂ reduction and N₂ reduction via photocatalytic and electrocatalytic pathways is being contemplated as a greener methodology with zero environmental pollution. Owing to their atomic-level thickness, two-dimensional (2D) semiconductor catalysts have triggered the reawakening of interest in the field of energy and environmental applications. Among them, following the unconventional properties of graphene, 2D MoS₂ has been widely investigated due to its outstanding optical and electronic properties. However, the photo/electrocatalytic performance of 2D-MoS₂ is still unsatisfactory due to its low charge carrier density. Recently, the development of 2D/2D heterojunctions has evoked interdisciplinary research fascination in the scientific community, which can mitigate the shortcomings associated with 2D-MoS₂. Following the recent research trends, the present review covers the recent findings and key aspects on the synthetic methods, fundamental properties and practical applications of semiconducting 2D-MoS₂ and its heterostructures with other 2D materials such as g-C₃N₄, graphene, CdS, TiO₂, MXene, black phosphorous, and boron nitride. Besides, this review details the viable application of these materials in the area of hydrogen energy production via the H₂O splitting reaction, N₂ fixation to NH₃ formation and CO₂ reduction to different value-added hydrocarbons and alcohol products through both photocatalysis and electrocatalysis. The crucial role of the interface together with the charge separation principle between two individual 2D structures towards achieving satisfactory activity for various applications is presented. Overall, the current studies provide a snapshot of the recent breakthroughs in the development of various 2D/2D-based catalysts in the field of energy production, delivering opportunities for future research.

Exfoliated Boron Nitride (e-BN) Tailored Exfoliated Graphitic Carbon Nitride (e-CN): An Improved Visible Light Mediated Photocatalytic Approach towards TCH Degradation and H2 Evolution

A series of 2D/2D exfoliated boron nitride/exfoliated g-C₃N₄ nanocomposites denoted as e-BN/e-CN have been successfully prepared using a simple in situ technique. The successful deposition of e-BN on e-CN was confirmed from high-resolution transmission electron microscopy analysis. According to electrochemical measurements, 1.5 wt % e-BN/e-CN nanocomposites showed 1.5 times more photocurrent than e-CN, which indicates the successful formation of an e-BN/e-CN heterostructure. The photocatalytic activities of the e-CN and e-BN/e-CN composites were investigated through photocatalytic tetracycline hydrochloride (TCH) degradation and H₂ evolution under visible light illumination. The 1.5 wt % e-BN/e-CN composite demonstrated the highest photocatalytic activities, which are about 21 and 1.5 fold greater than e-CN towards H₂ generation with an apparent conversion efficiency of 2.34% and TCH degradation, respectively. The improved photocatalytic activities of e-BN/e-CN photocatalysts were ascribed to the augmented light-harvesting ability and enhanced separation efficiency of charge carriers. Lower photoluminescence intensity and a smaller arc value in the impedance spectra again proved the reduced recombination of the e^--h⁺ pairs in the e-BN/e-CN nanocomposites. Trapping experiments show that ^•O₂^-, h⁺, and ^•OH radicals are the predominant reactive species that accelerated the photocatalytic activities of e-BN/e-CN composites. This study opens up a new window towards the fabrication of such 2D/2D nanocomposites in the field of photocatalysis.

Ultrasonication-assisted liquid-phase exfoliation enhances photoelectrochemical performance in α-Fe2O3/MoS2 photoanode

This study successfully manufactured a p-n heterojunction hematite (α-Fe₂O₃) structure with molybdenum disulfide (MoS₂) to address the electron-hole transfer problems of conventional hematite to enhance photoelectrochemical (PEC) performance. The two-dimensional MoS₂ nanosheets were prepared through ultrasonication-assisted liquid-phase exfoliation, after which the concentration, number of layers, and thickness parameters of the MoS₂ nanosheets were respectively estimated by UV-vis, HRTEM and AFM analysis to be 0.37 mg/ml, 10-12 layers and around 6 nm. The effect of heterojunction α-Fe₂O₃/MoS₂ and the role of the ultrasonication process were investigated by the optimized concentration of MoS₂ in the forms of bulk and nanosheet on the surface of the α-Fe₂O₃ electrode while measuring the PEC performance. The best photocurrent density of the α-Fe₂O₃/MoS₂ photoanode was obtained at 1.52 and 0.86 mA.cm^-2 with good stability at 0.6 V vs. Ag/AgCl under 100 mW/cm² (AM 1.5) illumination from the back- and front-sides of α-Fe₂O₃/MoS₂; these values are 13.82 and 7.85-times higher than those of pure α-Fe₂O₃, respectively. The results of electrochemical impedance spectroscopy (EIS) and Mott-Schottky analysis showed increased donor concentration (2.6-fold) and decreased flat band potential (by 20%). Moreover, the results of IPCE, ABPE, and OCP analyses also supported the enhanced PEC performance of α-Fe₂O₃/MoS₂ through the formation of a p-n heterojunction, leading to a facile electron-hole transfer.

Activation Strategy of MoS2 as HER Electrocatalyst through Doping-Induced Lattice Strain, Band Gap Engineering, and Active Crystal Plane Design

Doping engineering emerges as a contemporary technique to investigate the catalytic performance of MoS₂. Cation and anion co-doping appears as an advanced route toward electrocatalytic hydrogen evolution reaction (HER). V and N as dopants in MoS₂ (VNMS) build up a strain inside the crystal structure and narrow down the optical band gaps manifesting the shifting of the absorbance band toward lower energy and improved catalytic performance. FE-SEM, HR-TEM, and XRD analysis confirmed that V and N doping decreases agglomeration possibility, particle size, developed strain, and crystal defects during crystal growth. Frequency shift and peak broadening in Raman spectra confirmed the doping induced strain generation in MoS₂ leading to the modification of acidic and alkaline HER (51 and 110 mV @ 10 mAcm^-2, respectively) performance. The improved donor density in VNMS was confirmed by the Mott-Schottky analysis. Enhanced electrical conductivity and optimized electronic structures facilities H* adsorption/desorption in the catalytically active (001) plane of cation and anion co-doped MoS₂.

Highlights of the characterization techniques on inorganic, organic (COF) and hybrid (MOF) photocatalytic semiconductors

This review is dedicated to the brave COVID warriors fighting against the COVID-2019 pandemic.

The enhanced photocatalytic performance of SnS2@MoS2 QDs with highly-efficient charge transfer and visible light utilization for selective reduction of mythlen-blue

Molybdenum disulfide (MoS₂) has recently been considered as an effective material for potential photocatalytic applications; however, its photocatalytic activity was limited due to the low density of active sites. In this work, MoS₂ Quantum dots (QDs) were synthesized via the ultrasonication technique to construct heterostructure with SnS₂ nanosheets (SnS₂@MoS₂ QDs) and the prepared materials were tested for photocatalytic applications for Methylene blue (MB). Pristine SnS₂ and SnS₂@MoS₂ QDs nanocomposite were analyzed by XRD, TEM, PL, and Uv-Vis. Both SnS₂ and SnS₂@MoS₂ QDs exhibited a single trigonal phase with the P-3m1 space group. The TEM analysis confirmed the coupling between the pristine SnS₂ and SnS₂@MoS₂ QDs. The results of photocatalytic activity toward MB indicated that SnS₂@MoS₂ QDs material exhibits much superior photocatalytic performance compared to pristine SnS₂. The excellent photodegradation performance of SnS₂@MoS₂ QDs is due in the main to the formation of heterojunction between SnS₂ and MoS₂ QDs with narrow bandgap formation, which results in a facile carriers transfer and thus high photocatalytic efficiency. A representative mechanism of the photodegradation for SnS₂@MoS₂ QDs photocatalyst was proposed. Such an ultrasonic technique is capable of producing small metallic particle size that can be used to construct new heterostructures for water remediation applications.

Vertical MoS2 on SiO2/Si and graphene: effect of surface morphology on photoelectrochemical properties

Two-dimensional materials have attracted intensive attention recently due to their unique optical and electronic properties and their promising applications in water splitting and solar cells. As a representative layer-structured of transition metal dichalcogenides, MoS2 has attracted considerable devotion owing to its exceptional photo and electro properties. Here, we show that the chemical vapour deposition (CVD) growth of MoS2 on Si photocathode and graphene/Si photocathode can be used to prepare photoelectrocatalysts for water splitting. We explore a bottom-up method to grow vertical heterostructures of MoS2 and graphene by using the two-step CVD. Graphene is first grown through ambient-pressure CVD on a Cu substrate and then transferred onto SiO2/Si substrate by using the chemical wet transfer followed by the second CVD method to grow MoS2 over the graphene/SiO2/Si. The effect of the growth temperatures of MoS2 is studied, and the optimum temperature is 800 °C. The MoS2 produced at 800 °C has the highest photocurrent density at -0.23 mA cm-2 in 0.5 M Na2SO4 and -0.51 mA cm-2 in 0.5 M H2SO4 at -0.8 V versus Ag/AgCl. The linear sweep voltammetry shows that MoS2 in 0.5 M H2SO4 has about 55% higher photocurrent density than MoS2 in Na2SO4 due to the higher concentration of protons (H+) in the H2SO4 electrolyte solution. Protons are reduced to H2 at lower overvoltage and hydrogen generation is thus enhanced at higher photocurrent density. MoS2/graphene/SiO2/Si (MGS) has -0.07 mA cm-2 at -0.8 V versus Ag/AgCl of photocurrent density, which is 70% lower than that of bare MoS2 because MGS is thicker compared with MoS2. Thus, MoS2 has potential as a photocatalyst in photoelectrochemical water splitting. The structure and the morphology of MoS2 play an important role in determining the photocurrent performance.

A radially controlled ZnS interlayer on ultra-long ZnO-Gd2S3 core-shell nanorod arrays for promoting the visible photocatalytic degradation of antibiotics

Nanorod (NR) arrays offer commendable visible-light-driven photocatalytic performances. Herein, we describe the construction of a ternary ZnO-ZnS-Gd₂S₃ nanostructural array in which a sulfidation process is used to decorate a Gd₂S₃ shell layer with a ZnS interface over vapor-phase-grown vertically-aligned ZnO. With control over the shell-wall thickness, the shell layer of ∼25 nm wall thickness on the ultra-long ZnO NR arrays exhibited a higher catalytic efficiency close to 3.3, 2.0, 1.2, and 1.8 times those of the bare ZnO, the ZnO-ZnS, the Gd₂S₃-decorated (∼10 nm) and Gd₂S₃ shell-layered (∼40 nm) ZnO-ZnS core-shell structures, respectively. The core-shell geometry and the shell-wall thickness with maximized contact interface afforded increased light absorption in the visible region and effectively retarded the recombination rate of the photoinduced charge carriers by confining electrons and holes separately, thus providing advantages in terms of the degradation of the pharmaceutical residue tetracycline and the industrial pollutant 4-nitrophenol in wastewater.

A type-II interband alignment heterojunction architecture of cobalt titanate integrated UiO-66-NH2: A visible light mediated photocatalytic approach directed towards Norfloxacin degradation and green energy (Hydrogen) evolution

Environmental pollution and energy scarcity is a major issue of the current scenario which forbear the progress of developing world. To overcome these problems towards a sustainable future, the utilization of sunlight by means of photocatalysis can be regarded as a best and suitable pathway. To validate this purpose, design and development of efficient heterogeneous photocatalyst for harvesting solar energy should be the major research concern for scientific community. In this regard herein, we have prepared a series of stable and efficient CoTiO₃/UiO-66-NH₂ p-n junction mediated heterogeneous photocatalyst by hydrothermal method. The functionalised linker of UiO-66-NH₂ provided an intimate interfacial contact with CoTiO₃ by Co/TiON ionic interaction, as proved by HRTEM and XPS analysis. Moreover the inverted V-shaped Mott-Schottky plot confirmed the junction formation in the optimised CoTiO₃/UiO-66-NH₂ material. In addition, EIS and PL analysis also provides sufficient evidence about the hindrance of active species recombination in composite as a result of p-n hetero junction. LC-MS characterization technique traces the assorted intermediate species produced in the course of photodegradation of Norfloxacin and confirms its complete degradation to corresponding CO₂, H₂O and NH₄⁺ by the optimised CoTiO₃/UiO-66-NH₂. The highest photo-catalytic activity obtained towards Norfloxacin degradation is 90.13% and H₂ production is 530.87 µmol in 1 h. The enhanced photo-catalytic reaction follows Type-II p-n hetero junction charge transfer mechanism and thus, paves a new way to design MOF based heterojunction photocatalyst for diverse photo catalytic performance.

Enhanced Photocatalytic Activities of RhB Degradation and H2 Evolution from in Situ Formation of the Electrostatic Heterostructure MoS2/NiFe LDH Nanocomposite through the Z-Scheme Mechanism via p-n Heterojunctions

Designing of an efficient heterostructure photocatalyst for photocatalytic organic pollutant removal and H₂ production has been a subject of rigorous research intended to solve the related environmental aggravation and enormous energy crises. Z-scheme-based charge-transfer dynamics in a p-n heterostructure could significantly replicate the inherent power of natural photosynthesis, which is the key point to affect the transportation of photoinduced exciton pairs. In this finding, a series of p-type MoS₂ loaded with n-type NiFe-layered double hydroxide (LDH) forming a heterostructure MoS₂/NiFe LDH were designed by electrostatic self-assembled chemistry and an in situ hydrothermal strategy for photocatalytic rhodamine B (RhB) dye degradation and H₂ production. The creation of p-n heterojunctions of type-II and Z-scheme mode of charge transfer modified the optical and electronic property of the as-synthesized MSLDH3, thereafter promoting the generation, separation, and migration of photoinduced electron-hole pairs. The as-synthesized MSLDH3 showed superior photocatalytic activities in degradation of RhB with H₂ evolution, which was enhanced by 3- and 4.5-fold and 10.9 and 19.2 times higher than that of NiFe LDH and MoS₂, respectively. Last but not the least, heterostructure MSLDH3 possesses practical stability for its resultant enhanced photocatalytic activity with recyclability for everyday life.