Hydrosilane Synthesis by Catalytic Hydrogenolysis of Chlorosilanes and Silyl Triflates

Enantioselective and Regiodivergent Synthesis of Propargyl- and Allenylsilanes through Catalytic Propargylic C-H Deprotonation

We report a highly enantioselective intermolecular C-H bond silylation catalyzed by a phosphoramidite-ligated iridium catalyst. Under reagent-controlled protocols, propargylsilanes resulting from C(sp3)-H functionalization, as well the regioisomeric and synthetically versatile allenylsilanes, could be obtained with excellent levels of enantioselectivity and good to excellent control of propargyl/allenyl selectivity. In the case of unsymmetrical dialkyl acetylenes, good to excellent selectivity for functionalization at the less-hindered site was also observed. A variety of electrophilic silyl sources (R3SiOTf and R3SiNTf2), either commercial or in situ-generated, were used as the silylation reagents, and a broad range of simple and functionalized alkynes, including aryl alkyl acetylenes, dialkyl acetylenes, 1,3-enynes, and drug derivatives were successfully employed as substrates. Detailed mechanistic experiments and DFT calculations suggest that an η3-propargyl/allenyl Ir intermediate is generated upon π-complexation-assisted deprotonation and undergoes outer-sphere attack by the electrophilic silylating reagent to give propargylic silanes, with the latter step identified as the enantiodetermining step.

Metal-Free Catalytic Hydrogenolysis of Chlorosilanes into Hydrosilanes with "Inverse" Frustrated Lewis Pairs

The challenging metal-free catalytic hydrogenolysis of silyl chlorides to hydrosilanes is unlocked by using an inverse frustrated Lewis pair (FLP), combining a mild Lewis acid (Cy2 BCl) and a strong phosphazene base (BTPP) in mild conditions (10 bar of H2 , r. t.). In the presence of a stoichiometric amount of the base, the hydrosilanes R3 SiH (R=Me, Et, Ph) are generated in moderate to high yields (up to 95 %) from their chlorinated counterparts. A selective formation of the valuable difunctional monohydride Me2 SiHCl is also obtained from Me2 SiCl2 . A mechanism is proposed based on stoichiometric experiments and DFT calculations; it highlights the critical role of borohydride species generated by the heterolytic splitting of H2 .

Siemens Reloaded: Chloride-Assisted Selective Hydrodechlorination of SiCl4 to HSiCl3

Trichlorosilane is the key intermediate for the large-scale production of polycrystalline silicon in the Siemens and Union Carbide processes. Both processes, however, are highly inefficient, and over two thirds of the trichlorosilane employed is converted to unwanted silicon tetrachloride accumulating in millions of tons per year on a global scale. In this combined experimental and theoretical study we report an energetically and environmentally benign synthetic protocol for the highly selective conversion of SiCl₄ to HSiCl₃ using organohydridosilanes as recyclable hydrogen transfer reagents in combination with onium chlorides as efficient catalysts. We put the same protocol to further use demonstrating the quantitative conversion of higher oligosilane residues, which form as another unwanted and potentially hazardous byproduct of Siemens processes, to HSiCl₃ in a low-temperature recycling step.

Triphenylborane in Metal-Free Catalysis

The development and application of new organoboron reagents as Lewis acids in synthesis and metal-free catalysis have dramatically expanded over the past 20 years. In this context, we will show the recent uses of the simple and relatively weak Lewis acid BPh₃-discovered 100 years ago-as a metal-free catalyst for various organic transformations. The first part will highlight catalytic applications in polymer synthesis such as the copolymerization of epoxides with CO₂, isocyanate, and organic anhydrides to various polycarbonate copolymers and controlled diblock copolymers as well as alternating polyurethanes. This is followed by a discussion of BPh₃ as a Lewis acid component in the frustrated Lewis pair (FLP) mediated cleavage of hydrogen and hydrogenation catalysis. In addition, BPh₃-catalyzed reductive N-methylations and C-methylations with CO₂ and silane to value-added organic products will be covered as well along with BPh₃-catalyzed cycloadditions and insertion reactions. Collectively, this mini-review showcases the underexplored potential of commercially available BPh₃ in metal-free catalysis.

Metal-Free Catalytic Hydrogenolysis of Silyl Triflates and Halides into Hydrosilanes

The metal-free catalytic hydrogenolysis of silyl triflates and halides (I, Br) to hydrosilanes is unlocked by using arylborane Lewis acids as catalysts. In the presence of a nitrogen base, the catalyst acts as a Frustrated Lewis Pair (FLP) able to split H₂ and generate a boron hydride intermediate capable of reducing (pseudo)halosilanes. This metal-free organocatalytic system is competitive with metal-based catalysts and enables the formation of a variety of hydrosilanes at room temperature in high yields (>85 %) under a low pressure of H₂ (≤10 bar).

Dynamic Kinetic Resolution of Alcohols by Enantioselective Silylation Enabled by Two Orthogonal Transition-Metal Catalysts

A nonenzymatic dynamic kinetic resolution of acyclic and cyclic benzylic alcohols is reported. The approach merges rapid transition-metal-catalyzed alcohol racemization and enantioselective Cu-H-catalyzed dehydrogenative Si-O coupling of alcohols and hydrosilanes. The catalytic processes are orthogonal, and the racemization catalyst does not promote any background reactions such as the racemization of the silyl ether and its unselective formation. Often-used ruthenium half-sandwich complexes are not suitable but a bifunctional ruthenium pincer complex perfectly fulfills this purpose. By this, enantioselective silylation of racemic alcohol mixtures is achieved in high yields and with good levels of enantioselection.

BNB-Doped Phenalenyls: Modular Synthesis, Optoelectronic Properties, and One-Electron Reduction

A highly modular synthesis of BNB- and BOB-doped phenalenyls is presented. Treatment of the 1,8-naphthalenediyl-bridged boronic acid anhydride 1 with LiAlH₄/Me₃SiCl afforded the corresponding 1,8-naphthalenediyl-supported diborane(6) 2, which served as the starting material for all subsequent transformations. Upon addition of MesMgBr/Me₃SiCl, 2 was readily converted to the tetraorganyl diborane(6) 5. The further heteroatoms were finally introduced through the reaction of 2 with (Me₃Si)₂NR' or 5 with H₂NR' or H₂O (R' = H, Me, p-Tol). A helically twisted, fully BNB-embedded PAH 11 was prepared by combining 2 with a dibrominated m-terphenylamine, followed by a Grignard-mediated double ring-closure reaction. All compounds devoid of B-H bonds show favorable optoelectronic properties, such as luminescence and reversible reduction behavior. In the case of the BNB-phenalenyl 7 (BMes, NMe), the radical-anion salt K[7^•] was generated through chemical reduction with K metal and characterized by EPR spectroscopy. K[7^•] is not long-term stable in a THF/c-hexane solution, but abstracts an H atom with formation of the diamagnetic BNB-doped 1H-phenalene K[7H].

Borohydride catalyzed redistribution reaction of hydrosilane and chlorosilane: a potential system for facile preparation of hydrochlorosilanes

Various borohydrides were found to catalyze the redistribution reaction of hydrosilane and chlorosilane in different solvents to produce hydrochlorosilanes efficiently and facilely. The redistribution reaction was affected by solvent and catalyst. The substrate scope was investigated in HMPA with LiBH₄ as catalyst. A possible mechanism was proposed to explain the redistribution process.

A borohydride catalyzed Si–H/Si–Cl redistribution system was established to prepare hydrochlorosilanes facilely and efficiently.

The Role of Proton Shuttles in the Reversible Activation of Hydrogen via Metal-Ligand Cooperation

The reversible activation of H₂ via a pathway involving metal-ligand cooperation (MLC) is proposed to be important in many transition metal catalyzed hydrogenation and dehydrogenation reactions. Nevertheless, there is a paucity of experimental information probing the mechanism of this transformation. Here, we present an in-depth kinetic study of the 1,2-addition of H₂ via an MLC pathway to the widely used iron catalyst [(^iPrPNP)FeH(CO)] (1) (^iPrPNP = N(CH₂CH₂PⁱPr₂)₂^-). We report one of the first experimental demonstrations of an enhancement in rate for the activation of H₂ using protic additives, which operate as "proton shuttles". Our results indicate that proton shuttles need to be able to both simultaneously donate and accept a proton, and the best shuttles are molecules that are strong hydrogen bond donors but sufficiently weak acids to avoid deleterious protonation of the transition metal complex. Additionally, comparison of the rate of H₂ activation via an MLC pathway between 1 and two widely used ruthenium catalysts enables more general conclusions about the role of the metal, ancillary ligand, and proton shuttles in H₂ activation. The results of this study provide guidance about the design of catalysts and additives to promote H₂ activation via an MLC pathway.

Diverse Catalytic Systems and Mechanistic Pathways for Hydrosilylative Reduction of CO2

Catalytic hydrosilylation of carbon dioxide has emerged as a promising approach for carbon dioxide utilization. It allows the reductive transformation of carbon dioxide into value-added products at the levels of formate, formaldehyde, methanol, and methane. Tremendous progress has been made in the area of carbon dioxide hydrosilylation since the first reports in 1981. This focus review describes recent advances in the design and catalytic performance of leading catalyst systems, including transition-metal, main-group, and transition-metal/main-group and main-group/main-group tandem catalysts. Emphasis is placed on discussions of key mechanistic features of these systems and efforts towards the development of more selective, efficient, and sustainable carbon dioxide hydrosilylation processes.

Disilane Cleavage with Selected Alkali and Alkaline Earth Metal Salts

The industry-scale production of methylchloromonosilanes in the Müller-Rochow Direct Process is accompanied by the formation of a residue, the direct process residue (DPR), comprised of disilanes Me_n Si₂ Cl_6-n (n=1-6). Great research efforts have been devoted to the recycling of these disilanes into monosilanes to allow reintroduction into the siloxane production chain. In this work, disilane cleavage by using alkali and alkaline earth metal salts is reported. The reaction with metal hydrides, in particular lithium hydride (LiH), leads to efficient reduction of chlorine containing disilanes but also induces disproportionation into mono- and oligosilanes. Alkali and alkaline earth chlorides, formed in the course of the reduction, specifically induce disproportionation of highly chlorinated disilanes, whereas highly methylated disilanes (n>3) remain unreacted. Nearly quantitative DPR conversion into monosilanes was achieved by using concentrated HCl/ether solutions in the presence of lithium chloride.

Making Use of the Direct Process Residue: Synthesis of Bifunctional Monosilanes

The industrial production of monosilanes Me_n SiCl_4-n (n=1-3) through the Müller-Rochow Direct Process generates disilanes Me_n Si₂ Cl_6-n (n=2-6) as unwanted byproducts ("Direct Process Residue", DPR) by the thousands of tons annually, large quantities of which are usually disposed of by incineration. Herein we report a surprisingly facile and highly effective protocol for conversion of the DPR: hydrogenation with complex metal hydrides followed by Si-Si bond cleavage with HCl/ether solutions gives (mostly bifunctional) monosilanes in excellent yields. Competing side reactions are efficiently suppressed by the appropriate choice of reaction conditions.

Synthesis of hydrosilanes via Lewis-base-catalysed reduction of alkoxy silanes with NaBH4

Hydrosilanes were synthesized by reduction of alkoxy silanes with BH₃ in the presence of hexamethylphosphoric triamide (HMPA) as a Lewis-base catalyst. The reaction was also achieved using an inexpensive and easily handled hydride source NaBH₄, which reacted with EtBr as a sacrificial reagent to form BH₃in situ.