Heteroleptic Copper(I) Complexes Prepared from Phenanthroline and Bis-Phosphine Ligands: Rationalization of the Photophysical and Electrochemical Properties

Theoretical Investigation and Molecular Design: A Series of Tripod-Type Cu(I) Blue Light Thermally Activated Delayed Fluorescence Materials

The photophysical properties and luminescent mechanism of a series of tripod-type Cu(I) complexes in solution and solids were comprehensively investigated through theoretical simulations. From a microscopic perspective, the experimental phenomenon is explained: (1) The intrinsic reason for the quenching of complex 1 in solution was attributed to the significant nonradiative transition caused by structural deformation; (2) In the solid, the reduced ΔEST for complex 2 effectively facilitate reverse intersystem crossing (RISC) and improves its luminescence efficiency; (3) The enhanced performance of complex 3 in solution is attributed to that its stronger steric hindrance is advantageous to decrease not only the ΔEST but also the reorganization energy through intramolecular weak interactions. Based on complex 3, the tert-butyl substituted isomeric complex 4 was designed. Complex 4 further amplifies the advantages of 3 to further promote the RISC to make full use of excitons. Meanwhile, it has an emission wavelength of 462.6 nm, which makes it an excellent candidate for high-efficiency deep-blue TADF materials. This study provides valuable information for obtaining efficient blue phosphorescence and TADF dual-channel luminescent materials.

Thermally Activated Delayed Fluorescence (TADF) Materials Based on Earth-Abundant Transition Metal Complexes: Synthesis, Design and Applications

Materials exhibiting thermally activated delayed fluorescence (TADF) based on transition metal complexes are currently gathering significant attention due to their technological potential. Their application extends beyond optoelectronics, in particular organic light-emitting diodes (OLEDs) and light-emitting electrochemical cells (LECs), and include also photocatalysis, sensing, and X-ray scintillators. From the perspective of sustainability, earth-abundant metal centers are preferred to rarer second- and third-transition series elements, thus determining a reduction in costs and toxicity but without compromising the overall performances. This review offers an overview of earth-abundant transition metal complexes exhibiting TADF and their application as photoconversion materials. Particular attention is devoted to the types of ligands employed, helping in the design of novel systems with enhanced TADF properties.

Diverse structural reactivity patterns of a POCOP ligand with coinage metals

We have utilised the 4,6-di-tert-butyl resorcinol bis(diphenylphosphinite) (POCOP) ligand for exploring its coordination ability towards group 11 metal centres. The treatment of the bidentate ligand 1 with various coinage metal precursors afforded a wide range of structurally diverse complexes 2-12, depending upon the metal precursors used. This furnishes several multinuclear Cu(I) complexes with dimeric (2) and tetrameric cores (3, 4, and 5). The tetrameric stairstep complex 4 shows thermochromic behaviour, whereas the dimeric complex 2 and tetrameric complex 3 show luminescence properties at cryogenic temperatures. Interestingly, the halide substitution reaction of the dimeric complex 2 with KPPh2 produces a unique mixed phosphine-based tetrameric Cu(I) complex, 5. Treatment of the POCOP ligand with [CuBF4(CH3CN)4] in the presence of 2,2'-bipyridine afforded heteroleptic complex 6, consisting of tri- and tetra-coordinated cationic Cu(I) centres. Furthermore, we could also isolate cubane (8) and stairstep (9) complexes of Ag(I). The cationic Au(I) complex (12) was obtained from the dinuclear Au(I) complex of POCOP, 11. Complex 12 revealed the presence of a strong intramolecular aurophilic interaction with an Au⋯Au bond distance of 3.1143(9) Å. Subsequently, the photophysical properties of these complexes have been studied. All the complexes were characterised by single-crystal X-ray diffraction studies, routine NMR techniques, and mass spectroscopy.

Synthesis and Photophysical Properties of Silver(I) Coordination Polymers Bridged by Dimethylpyrazine: Comparison of Emissive Excited States between Silver(I) and Copper(I) Congeners

Highly luminescent silver(I) coordination polymers [Ag2X2(PPh3)2(Me2pyz)]n (X = I, Br, Cl; Me2pyz: 2,5-dimethylpyrazine) were prepared together with copper congeners [Cu2X2(PPh3)2(Me2pyz)]n (X = I, Br). All the complexes showed thermally activated delayed fluorescence from the charge-transfer states in the visible region, from blue to red. The isomorphous relationship among the complexes allowed a detailed discussion of the effect of halogenido ligands and crystal packing on their luminescence energy. The relaxation in the emissive excited states (ESs) was determined to be more remarkable in silver complexes than in copper complexes despite their isomorphous structures, and the electronic effect of halogenido ligands was comparable to the effect of relaxation in emissive ESs.

Introducing sterically demanding substituents and π-π-interactions into [Cu(P^P)(N^N)]+ complexes

A series of ten N^N chelating ligands based on a 2,2'-bipyridine (bpy) metal-binding domain and featuring sterically hindering substituents in the 6- and 6,6'-positions has been synthesized and characterized. The ligands have been incorporated into a family of 15 heteroleptic complexes of type [Cu(P^P)(N^N)][PF6] where P^P is the wide bite-angle bisphosphane ligand bis(2(diphenylphosphanyl)phenyl)ether (POP) or (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane) (xantphos). Substituents in several of the N^N ligands ligands possess phenyl rings remotely tethered to enable intra- and intermolecular π-π-interactions in the [Cu(P^P)(N^N)]+ cations. Single crystal X-ray structures of 12 complexes are reported. The effects of the functional groups in the bpy ligand on the photophysical properties of the complexes have been studied; solid-state emission maxima range from 518 to 567 nm. Values of the solid-state photoluminescence quantum yields (PLQYs) of the [Cu(P^P)(N^N)][PF6] compounds respond to the nature of the N^N ligand. In general, we observed that the [Cu(P^P)(N^N)]+ complexes containing 6,6'-disubstituted complexes with phenyl moieties connected via a CH2CH2 or CH2CH2CH2 spacer to the bpy domain have the highest values of PLQY. The most significant compounds are [Cu(POP)((2-PhEt)2bpy)][PF6] (PLQY = 67%) and [Cu(POP)((3-PhPr)2bpy)][PF6] (PLQY = 72%) where (2-PhEt)2bpy = 6,6'-bis(2-phenylethyl)-2,2'-bipyridine and (3-PhPr)2bpy = 6,6'-bis(3-phenylpropyl)-2,2'-bipyridine. These PLQY values are among the best performing previously reported families of [Cu(P^P)(N^N)][PF6] compounds.

Stabilization of Luminescent Mononuclear Three-Coordinate CuI Complexes by Two Distinct Cavity-Shaped Diphosphanes Obtained from a Single α-Cyclodextrin Precursor

Slightly different reaction conditions afforded two distinct cavity-shaped cis-chelating diphosphanes from the same starting materials, namely diphenyl(2-phosphanylphenyl)phosphane and an α-cyclodextrin-derived dimesylate. Thanks to their metal-confining properties, the two diphosphanes form only mononuclear [CuX(PP)] complexes (X=Cl, Br, or I) with the tricoordinated metal ion located just above the center of the cavity. The two series of CuI complexes display markedly different luminescence properties that are both influenced by the electronic properties of the ligand and the unique steric environment provided by the cyclodextrin (CD) cavity. The excited state lifetimes of all complexes are significantly longer than those of the cavity-free analogues suggesting peculiar electronic effects that affect radiative deactivation constants. The overall picture stemming from absorption and emission data suggests close-lying charge-transfer (MLCT, XLCT) and triplet ligand-centered (LC) excited states.

Binuclear Copper(I) Complexes for Near-Infrared Light-Emitting Electrochemical Cells

Two binuclear heteroleptic CuI complexes, namely Cu-NIR1 and Cu-NIR2, bearing rigid chelating diphosphines and π-conjugated 2,5-di(pyridin-2-yl)thiazolo[5,4-d]thiazole as the bis-bidentate ligand are presented. The proposed dinuclearization strategy yields a large bathochromic shift of the emission when compared to the mononuclear counterparts (M1-M2) and enables shifting luminescence into the near-infrared (NIR) region in both solution and solid state, showing emission maximum at ca. 750 and 712 nm, respectively. The radiative process is assigned to an excited state with triplet metal-to-ligand charge transfer (3 MLCT) character as demonstrated by in-depth photophysical and computational investigation. Noteworthy, X-ray analysis of the binuclear complexes unravels two interligand π-π-stacking interactions yielding a doubly locked structure that disfavours flattening of the tetrahedral coordination around the CuI centre in the excited state and maintain enhanced NIR luminescence. No such interaction is present in M1-M2. These findings prompt the successful use of Cu-NIR1 and Cu-NIR2 in NIR light-emitting electrochemical cells (LECs), which display electroluminescence maximum up to 756 nm and peak external quantum efficiency (EQE) of 0.43 %. Their suitability for the fabrication of white-emitting LECs is also demonstrated. To the best of our knowledge, these are the first examples of NIR electroluminescent devices based on earth-abundant CuI emitters.

Bichromophoric Photosensitizers: How and Where to Attach Pyrene Moieties to Phenanthroline to Generate Copper(I) Complexes

Pyrene is a polycyclic aromatic hydrocarbon and organic dye that can form superior bichromophoric systems when combined with a transition metal-based chromophore. However, little is known about the effect of the type of attachment (i.e., 1- vs 2-pyrenyl) and the individual position of the pyrenyl substituents at the ligand. Therefore, a systematic series of three novel diimine ligands and their respective heteroleptic diimine-diphosphine copper(I) complexes has been designed and extensively studied. Special attention was given to two different substitution strategies: (i) attaching pyrene via its 1-position, which occurs most frequently in the literature, or via its 2-position and (ii) targeting two contrasting substitution patterns at the 1,10-phenanthroline ligand, i.e., the 5,6- and the 4,7-position. In the applied spectroscopic, electrochemical, and theoretical methods (UV/vis, emission, time-resolved luminescence and transient absorption, cyclic voltammetry, density functional theory), it has been shown that the precise choice of the derivatization sites is crucial. Substituting the pyridine rings of phenanthroline in the 4,7-position with the 1-pyrenyl moiety has the strongest impact on the bichromophore. This approach results in the most anodically shifted reduction potential and a drastic increase in the excited state lifetime by more than two orders of magnitude. In addition, it enables the highest singlet oxygen quantum yield of 96% and the most beneficial activity in the photocatalytic oxidation of 1,5-dihydroxy-naphthalene.

Reaching strong absorption up to 700 nm with new benzo[g]quinoxaline-based heteroleptic copper(I) complexes for light-harvesting applications

Heteroleptic copper(I) complexes, with a diimine as a chromophoric unit and a bulky diphosphine as an ancillary ligand, have the advantage of a reduced pseudo Jahn-Teller effect in their excited state over the corresponding homoleptic bis(diimine) complexes. Nevertheless, their lowest absorption lies generally between 350 to 500 nm. Aiming at a strong absorption in the visible by stable heteroleptic Cu(I) complexes, we designed a novel diimine based on 4-(benzo[g]quinoxal-2'-yl)-1,2,3-triazole derivatives. The large π-conjugation of the benzoquinoxaline moiety shifted bathochromically the absorption with regard to other diimine-based Cu(I) complexes. Adding another Cu(I) core broadened the absorption and extended it to considerably longer wavelengths. Moreover, by fine-tuning the structure of the dichelating ligand, we achieved a panchromatic absorption up to 700 nm with a high molar extinction coefficient of 8000 M^-1 cm^-1 at maximum (λ = 570 nm), making this compound attractive for light-harvesting antennae.

[6-(Thiophen-2-yl)-2,2′-bipyridine]bis(triphenylphosphine) Copper(I) Tetrafluoroborate

The novel heteroleptic copper (I) complex [6-(thiophen-2-yl)-2,2′-bipyridine]bis(triphenylphosphine) copper(I) tetrafluoroborate (1), formulated as [CuL(PPh3)2]BF4, was synthesized in two steps, utilizing the diimine type ligand L = 6-(thiophen-2-yl)-2,2′-bipyridine and triphenylphosphine (PPh3). The compound was characterized both in the solid state and in solution by employing single crystal X-ray diffraction, IR, UV, and NMR spectroscopies. The complex is an orange emitter that demonstrates a photoluminescence quantum yield of 2.6% in the solid state.

Using a diphenyl-bi-(1,2,4-triazole) tricarbonylrhenium(I) complex with intramolecular π-π stacking interaction for efficient solid-state luminescence enhancement

Since intramolecular π-π stacking interactions can modify the geometry, crystal packing mode, or even the electronic properties of transition metal complexes, they are also likely to influence the solid-state luminescence properties. Following this concept, a new tricarbonylrhenium(I) complex (Re-BPTA) was designed, based on a simple symmetrical 5,5'-dimethyl-4,4'-diphenyl-3,3'-bi-(1,2,4-triazole) organic ligand. The complex was prepared in good yield using a three-step procedure. The crystallographic study revealed that both phenyl rings are located on the same side of the molecule, and twisted by 71° and 62°, respectively, with respect to the bi-(1,2,4-triazole) unit. They overlap significantly, although they are slipped parallel to each other to minimize the intramolecular interaction energy. The π-π stacking interaction was also revealed by ¹H NMR spectroscopy, in good agreement with the results of theoretical calculations. In organic solutions, a peculiar electrochemical signature was observed compared to closely-related pyridyl-triazole (pyta)-based complexes. With regard to the optical properties, the stiffness of the Re-BPTA complex led to the stabilization of the ³MLCT state, and thus to an enhancement of the red phosphorescence emission compared to the more flexible pyta complexes. However, an increased sensitivity to quenching by oxygen appeared. In the microcrystalline phase, the Re-BPTA complex showed strong photoluminescence (PL) emission in the green-yellow wavelength range (λ_PL = 548 nm, Φ_PL = 0.52, 〈τ_PL〉 = 713 ns), and thus a dramatic solid-state luminescence enhancement (SLE) effect. These attractive emission properties can be attributed to the fact that the molecule undergoes little distortion between the ground state and the triplet excited state, as well as to a favorable intermolecular arrangement that minimizes detrimental interactions in the crystal lattice. The aggregation-induced phosphorescence emission (AIPE) effect was clear, with a 7-fold increase in emission intensity at 546 nm, although the aggregates formed in aqueous medium were much less emissive than the native microcrystalline powder. In this work, the rigidity of the Re-BPTA complex is reinforced by the intramolecular π-π stacking interaction of the phenyl rings. This original concept provides a rhenium tricarbonyl compound with very good SLE properties, and could be used more widely to successfully develop this area of research.

Stable Luminescent [Cu(NN)(PP)]+ Complexes Incorporating a β-Cyclodextrin-Based Diphosphane Ligand with Metal-Confining Properties

A β-cyclodextrin-based diphosphane with metal-confining properties was efficiently synthesized thanks to an unprecedented Smiles-like rearrangement of diphenyl-(2-phosphanylphenyl)phosphane in the presence of excess n-BuLi. The cis-chelating bidentate ligand is capable of forming very stable heteroleptic [Cu(NN)(PP)]⁺ complexes in which a metal-bound diimine ligand (bpy, phen, or mmp) is located within the cyclodextrin cavity. As a result of ligand encapsulation, flattening of the metal tetrahedral geometry in the excited state is disfavored, thereby resulting in enhanced luminescent properties.

Effect of non-covalent self-dimerization on the spectroscopic and electrochemical properties of mixed Cu(i) complexes

A series of six new Cu(i) complexes with ([Cu(N-{4-R}pyridine-2-yl-methanimine)(PPh₃)Br]) formulation, where R corresponds to a donor or acceptor p-substituent, have been synthesized and were used to study self-association effects on their structural and electrochemical properties. X-ray diffraction results showed that in all complexes the packing is organized from a dimer generated by supramolecular π stacking and hydrogen bonding. ¹H-NMR experiments at several concentrations showed that all complexes undergo a fast-self-association monomer-dimer equilibrium in solution, while changes in resonance frequency towards the high or low field in specific protons of the imine ligand allow establishing that dimers have similar structures to those found in the crystal. The thermodynamic parameters for this self-association process were calculated from dimerization constants determined by VT-¹H-NMR experiments for several concentrations at different temperatures. The values for K _D (4.0 to 70.0 M^-1 range), ΔH (-1.4 to -2.6 kcal mol^-1 range), ΔS (-0.2 to 2.1 cal mol^-1 K^-1 range), and ΔG ₂₉₈ (-0.8 to -2.0 kcal mol^-1 range) are of the same order and indicate that the self-dimerization process is enthalpically driven for all complexes. The electrochemical profile of the complexes shows two redox Cu(ii)/Cu(i) processes whose relative intensities are sensitive to concentration changes, indicating that both species are in chemical equilibrium, with the monomer and the dimer having different electrochemical characteristics. We associate this behaviour with the structural lability of the Cu(i) centre that allows the monomeric molecules to reorder conformationally to achieve a more adequate assembly in the non-covalent dimer. As expected, structural properties in the solid and in solution, as well as their electrochemical properties, are not correlated with the electronic parameters usually used to evaluate R substituent effects. This confirms that the properties of the Cu(i) complexes are usually more influenced by steric effects than by the inductive effects of substituents of the ligands. In fact, the results obtained showed the importance of non-covalent intermolecular interactions in the structuring of the coordination geometry around the Cu centre and in the coordinative stability to avoid dissociative equilibria.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Unexpected Boost in Activity of a Cu(I) Photosensitizer by Stabilizing a Transient Excited State

In this study, we present a slight but surprisingly successful structural modification of the previously reported heteroleptic Cu(I) photosensitizer Cubiipo ([(xantphos)Cu(biipo)]PF₆; biipo = 16H-benzo-[4',5']-isoquinolino-[2',1':1,2]-imidazo-[4,5-f]-[1,10]-phenanthrolin-16-one). As a key feature, biipo bears a naphthalimide unit at the back, which is directly fused to a phenanthroline moiety to extend the conjugated π-system. This ligand was now altered to include two additional methyl groups at the 2,9-positions at the phenanthroline scaffold. Comparing the novel Cudmbiipo complex to its predecessor, ultrafast transient absorption spectroscopy reveals the efficient suppression of a major deactivation pathway by stabilization of a transient triplet state. Furthermore, quantitative measurements of singlet oxygen evolution in solution confirmed that a larger fraction of the excited-state population is transferred to the photocatalytically active ligand-centered triplet ³LC state with a much longer lifetime of ∼30 μs compared to Cubiipo (2.6 μs). In addition, Cudmbiipo was compared with the well-established reference complex Cubcp ([(xantphos)Cu(bathocuproine)]PF₆) in terms of its photophysical and photocatalytic properties by applying time-resolved femto- and nanosecond absorption, step-scan Fourier transform infrared (FTIR), and emission spectroscopies. Superior light-harvesting properties and a greatly enhanced excited-state lifetime with respect to Cubcp enable Cudmbiipo to be more active in exemplary photocatalytic applications, i.e., in the formation of singlet oxygen and the isomerization of (E)-stilbene.

Quasi-Restricted Orbital Description of the Copper(I) Photoredox Catalytic Cycle

In this computational study, the electronic structure changes along the oxidative and reductive quenching cycles of a homoleptic and a heteroleptic prototype Cu(I) photoredox catalyst, namely [Cu(dmp)2]+ (dmp = 2,9-dimethyl-1,10-phenanthroline) and [Cu(phen)(POP)]+ (POP = bis[2-(diphenylphosphino)phenyl]ether) are scrutinized and characterized using quasi-restricted orbitals (QRO), electron density differences and spin densities. After validating our density functional theory-based computational protocol, the equilibrium geometries and wavefunctions (using QROs and atom/fragment compositions) of the four states involved in photoredox cycle (S0, T1, Dox and Dred) are systematically and thoroughly described. The formal ground and excited state ligand- and metal-centered redox events are substantiated by the QRO description of the open-shell triplet 3MLCT (d9L-1), Dox (d9L0) and Dred (d10L-1) species and the corresponding structural changes, e.g., flattening distortion, shortening/elongation of Cu-N/Cu-P bonds, are rationalized in terms of the underlying electronic structure transformations. Amongst others, we reveal the molecular-scale delocalization of the ligand-centered radical in the a 3MLCT (d9L-1) and Dred (d9L-1) states of homoleptic [Cu(dmp)2]+ and its localization to the redox-active phenanthroline ligand in the case of heteroleptic [Cu(phen)(POP)]+.

How the Way a Naphthalimide Unit is Implemented Affects the Photophysical and -catalytic Properties of Cu(I) Photosensitizers

Driven by the great potential of solar energy conversion this study comprises the evaluation and comparison of two different design approaches for the improvement of copper based photosensitizers. In particular, the distinction between the effects of a covalently linked and a directly fused naphthalimide unit was assessed. For this purpose, the two heteroleptic Cu(I) complexes CuNIphen (NIphen = 5-(1,8-naphthalimide)-1,10-phenanthroline) and Cubiipo (biipo = 16H-benzo-[4′,5′]-isoquinolino-[2′,1′,:1,2]-imidazo-[4,5-f]-[1,10]-phenanthroline-16-one) were prepared and compared with the novel unsubstituted reference compound Cuphen (phen = 1,10-phenanthroline). Beside a comprehensive structural characterization, including two-dimensional nuclear magnetic resonance spectroscopy and X-ray analysis, a combination of electrochemistry, steady-state and time-resolved spectroscopy was used to determine the electrochemical and photophysical properties in detail. The nature of the excited states was further examined by (time-dependent) density functional theory (TD-DFT) calculations. It was found that CuNIphen exhibits a greatly enhanced absorption in the visible and a strong dependency of the excited state lifetimes on the chosen solvent. For example, the lifetime of CuNIphen extends from 0.37 µs in CH2Cl2 to 19.24 µs in MeCN, while it decreases from 128.39 to 2.6 µs in Cubiipo. Furthermore, CuNIphen has an exceptional photostability, allowing for an efficient and repetitive production of singlet oxygen with quantum yields of about 32%.

Thermally activated delayed fluorescence in luminescent cationic copper(i) complexes

In this work, the photophysical characteristics of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ complexes were described. The concept of thermally activated delayed fluorescence (TADF) and its development throughout the years was also explained. The importance of ΔE (S1-T1) and spin-orbital coupling (SOC) values on the TADF behavior of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ complexes is discussed. Examples of ΔE (S1-T1) values reported in the literature were collected and some trends were proposed (e.g. the effect of the substituents at the 2,9 positions of the phenanthroline ligand). Besides, the techniques (or calculation methods) used for determining ΔE (S1-T1) values were described. The effect of SOC in TADF was also discussed, and examples of the determination of SOC values by DFT and TD-DFT calculations are provided. The last chapter covers the applications of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ TADF complexes and the challenges that are still needed to be addressed to ensure the industrial applications of these compounds.

TADF: Enabling luminescent copper(i) coordination compounds for light-emitting electrochemical cells

The last decade has seen a surge of interest in the emissive behaviour of copper(i) coordination compounds, both neutral compounds that may have applications in organic light-emitting doides (OLEDs) and copper-based ionic transition metal complexes (Cu-iTMCs) with potential use in light-emitting electrochemical cells (LECs). One of the most exciting features of copper(i) coordination compounds is their possibility to exhibit thermally activated delayed fluorescence (TADF) in which the energy separation of the excited singlet (S1) and excited triplet (T1) states is very small, permitting intersystem crossing (ISC) and reverse intersystem crossing (RISC) to occur at room temperature without the requirement for the large spin-orbit coupling inferred by the presence of a heavy metal such as iridium. In this review, we focus mainly in Cu-iTMCs, and illustrate how the field of luminescent compounds and those exhibiting TADF has developed. Copper(i) coordination compounds that class as Cu-iTMCs include those containing four-coordinate [Cu(P^P)(N^N)]+ (P^P = large-bite angle bisphosphane, and N^N is typically a diimine), [Cu(P)2(N^N)]+ (P = monodentate phosphane ligand), [Cu(P)(tripodal-N3)]+, [Cu(P)(N^N)(N)]+ (N = monodentate N-donor ligand), [Cu(P^P)(N^S)]+ (N^S = chelating N,S-donor ligand), [Cu(P^P)(P^S)]+ (P^S = chelating P,S-donor ligand), [Cu(P^P)(NHC)]+ (NHC = N-heterocyclic carbene) coordination domains, dinuclear complexes with P^P and N^N ligands, three-coordinate [Cu(N^N)(NHC)]+ and two-coordinate [Cu(N)(NHC)]+ complexes. We pay particular attention to solid-state structural features, e.g. π-stacking interactions and other inter-ligand interactions, which may impact on photoluminescence quantum yields. Where emissive Cu-iTMCs have been tested in LECs, we detail the device architectures, and this emphasizes differences which make it difficult to compare LEC performances from different investigations.

The surprising effects of sulfur: achieving long excited-state lifetimes in heteroleptic copper(i) emitters

A series of heteroleptic [Cu(N^N)(P^P)][PF6] complexes is reported in which N^N is a di(methylsulfanyl)-1,10-phenanthroline (2,9-, 3,8- or 4,7-(MeS)2phen) or di(methoxy)-1,10-phenanthroline (2,9-, 3,8- or 4,7-(MeO)2phen) and P^P is bis(2-(diphenylphosphano)phenyl)ether (POP) or 4,5-bis(diphenylphosphano)-9,9-dimethylxanthene (xantphos). The effects of the different substituents are investigated through structural, electrochemical and photophysical studies and by using DFT and TD-DFT calculations. Introducing methylsulfanyl groups in the 2,9-, 3,8- or 4,7-positions of the phen domain alters the composition of the frontier molecular orbitals of the [Cu(N^N)(P^P)]+ complexes significantly, so that ligand-centred (LC) transitions become photophysically relevant with respect to metal-to-ligand charge transfer (MLCT). Within this series, [Cu(2,9-(MeS)2phen)(POP)][PF6] exhibits the highest photoluminescence quantum yield of 15% and the longest excited-state lifetime of 8.3 μs in solution. In the solid state and in frozen matrices at 77 K, the electronic effects of the methylsulfanyl or methoxy substituents are highlighted, thus resulting in luminescence lifetimes of 2 to 4.2 ms at 77 K with predominantly LC character for both the 3,8- and 4,7-(MeS)2phen containing complexes. The results of the investigation give new guidelines on how to influence the luminescence properties in [Cu(N^N)(P^P)]+ complexes which will aid in the development of new sustainable and efficient copper(i) emitters.

Dependence between luminescence properties of Cu(i) complexes and electronic/structural parameters derived from steric effects

Quantification of steric effects induced by bulky N^N ligands and their relationship with the luminescence properties of Cu(i) complexes.

Unusual fluorescence behaviour of a heteroleptic Cu(i) complex featuring strong electron donating groups on a diimine ligand

Synthesis of a novel bulky diimine ligand and its corresponding heteroleptic Cu(i). Unusual fluorescence behavior of a novel Cu(i) complex due to a strong electron-donor diimine ligand.

Visible-emitting Cu(i) complexes with N-functionalized benzotriazole-based ligands

Bidentate benzotriazole-based N-ligands are suited for the preparation of luminescent heteroleptic copper(i) complexes with noticeable emissions related to 3MLCT transitions.

Comprehensive Picture of the Excited State Dynamics of Cu(I)- and Ru(II)-Based Photosensitizers with Long-Lived Triplet States

Ru(II)- and Cu(I)-based photosensitizers featuring the recently developed biipo ligand (16H-benzo-[4',5']-isoquinolino-[2',1',:1,2]-imidazo-[4,5-f]-[1,10]-phenanthrolin-16-one) were comprehensively investigated by X-ray crystallography, electrochemistry, and especially several time-resolved spectroscopic methods covering all time scales from femto- to milliseconds. The analysis of the experimental results is supported by density functional theory (DFT) calculations. The biipo ligand consists of a coordinating 1,10-phenanthroline moiety fused with a 1,8-naphthalimide unit, which results in an extended π-system with an incorporated electron acceptor moiety. In a previous study, it was shown that this ligand enabled a Ru(II) complex that is an efficient singlet oxygen producer and of potential use for other light-driven applications due to its long emission lifetime. The goal of our here presented research is to provide a full spectroscopic picture of the processes that follow optical excitation. Interestingly, the Ru(II) and Cu(I) complexes differ in their characteristics even though the lowest electronically excited states involve in both cases the biipo ligand. The combined spectroscopic results indicate that an emissive ³MLCT state and a rather dark ³LC state are populated, each to some extent. For the Cu(I) complex, most of the excited population ends up in the ³LC state with an extraordinary lifetime of 439 μs in the solid state at 20 K, while a significant population of the ³MLCT state causes luminescence for the Ru(II) complex. Hence, there is a balance between these two states, which can be tuned by altering the metal center or even by thermal energy, as suggested by the temperature-dependent experiments.

A counterion study of a series of [Cu(P^P)(N^N)][A] compounds with bis(phosphane) and 6-methyl and 6,6'-dimethyl-substituted 2,2'-bipyridine ligands for light-emitting electrochemical cells

The syntheses and characterisations of a series of heteroleptic copper(I) compounds [Cu(POP)(Mebpy)][A], [Cu(POP)(Me2bpy)][A], [Cu(xantphos)(Mebpy)][A] and [Cu(xantphos)(Me2bpy)][A] in which [A]- is [BF4]-, [PF6]-, [BPh4]- and [BArF4]- (Mebpy = 6-methyl-2,2'-bipyridine, Me2bpy = 6,6'-dimethyl-2,2'-bipyridine, POP = oxydi(2,1-phenylene)bis(diphenylphosphane), xantphos = (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane), [BArF4]- = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate) are reported. Nine of the compounds have been characterised by single crystal X-ray crystallography, and the consequences of the different anions on the packing interactions in the solid state are discussed. The effects of the counterion on the photophysical properties of [Cu(POP)(N^N)][A] and [Cu(xantphos)(N^N)][A] (N^N = Mebpy and Me2bpy) have been investigated. In the solid-state emission spectra, the highest energy emission maxima are for [Cu(xantphos)(Mebpy)][BPh4] and [Cu(xantphos)(Me2bpy)][BPh4] (λemmax = 520 nm) whereas the lowest energy λemmax values occur for [Cu(POP)(Mebpy)][PF6] and [Cu(POP)(Mebpy)][BPh4] (565 nm and 563 nm, respectively). Photoluminescence quantum yields (PLQYs) are noticeably affected by the counterion; in the [Cu(xantphos)(Me2bpy)][A] series, solid-state PLQY values decrease from 62% for [PF6]-, to 44%, 35% and 27% for [BF4]-, [BPh4]- and [BArF4]-, respectively. This latter series of compounds was used as active electroluminescent materials on light-emitting electrochemical cells (LECs). The luminophores were mixed with ionic liquids (ILs) [EMIM][A] ([EMIM]+ = [1-ethyl-3-methylimidazolium]+) containing the same or different counterions than the copper(I) complex. LECs containing [Cu(xantphos)(Me2bpy)][BPh4] and [Cu(xantphos)(Me2bpy)][BArF4] failed to turn on under the LEC operating conditions, whereas those with the smaller [PF6]- or [BF4]- counterions had rapid turn-on times and exhibited maximum luminances of 173 and 137 cd m-2 and current efficiencies of 3.5 and 2.6 cd A-1, respectively, when the IL contained the same counterion as the luminophore. Mixing the counterions ([PF6]- and [BF4]-) of the active complex and the IL led to a reduction in all the figures of merit of the LECs.

Closo- or Nido-Carborane Diphosphane as Responsible for Strong Thermochromism or Time Activated Delayed Fluorescence (TADF) in [Cu(N^N)(P^P)]0/

Ortho-closo or ortho-nido-carborane-diphosphanes have been selected to prepare the heteroleptic cationic or neutral [Cu(N^N){(PPh2)2C2B10H10}]PF6 (1) and [Cu(N^N){(PPh2)2C2B9H10}] (2) [N^N = 2-(4-thiazolyl)benzimidazole], respectively. Complexes 1 and 2 display very different emissive behavior. Neutral complex 2 exhibits TADF (time activated delayed fluorescence) which has been studied both as powder and PMMA composite with similar ΔE(S1 - T1), τ(T1), and τ(S1) in both phases. Cationic complex 1 displays a much lower quantum yield than 2 and does not show TADF, but it exhibits a significant thermochromic luminescence, and its emission is very dependent on the medium. Theoretical studies show that metal-ligand (M-diphosphane) to ligand (L', diimine) transitions, MLL'CT, are responsible of the transitions which originate the emissive properties, but with very different contribution of the copper center, carborane cluster, and diphosphane phenyl rings for 1 and 2.

Towards rainbow photo/electro-luminescence in copper(i) complexes with the versatile bridged bis-pyridyl ancillary ligand

The synthesis and characterization of a family of copper(i) complexes bearing a bridged bis-pyridyl ancillary ligand is reported, highlighting how the bridge nature impacts the photo- and electro-luminescent behaviours within the family. In particular, the phosphonium bridge led to copper(i) complexes featuring good electrochemical stability and high ionic conductivity, as well as a stark blue-to-orange luminescence shift compared to the others. This resulted in high performance light-emitting electrochemical cells reaching stabilities of 10 mJ at ca. 40 cd m^-2 that are one order of magnitude higher than those of the other complexes. Overall, this work sheds light onto the crucial role of the bridge nature of the bis-pyridyl ancillary ligand on the photophysical features, film forming and, in turn, on the final device performances.

Intertwined Analytical, Experimental and Theoretical Studies on the Formation and Structure of a Copper Dienolate

The reaction of a silyl dienolate, a Cu(II) salt and TBAT yielding the corresponding copper dienolate is addressed. A combined NMR and cyclic voltammetry analysis first highlight the role of TBAT in the Cu(II) to Cu(I) reduction and the structure of the precatalytic species. From these first results a second set of NMR and theoretical studies enable the determination of the structure and the mechanism of formation of the copper dienolate catalytic species. Finally, we showed that that the copper catalyst promote the E/Z s-cis/s-trans equilibration of the silyl dienolate precursor through a copper dienolate intermediate. All of these results unveil some peculiarities of the catalytic and asymmetric vinylogous Mukaiyama reaction.

Cyan-Emitting Cu(I) Complexes and Their Luminescent Metallopolymers

Copper complexes have shown great versatility and a wide application range across the natural and life sciences, with a particular promise as organic light-emitting diodes. In this work, four novel heteroleptic Cu(I) complexes were designed in order to allow their integration in advanced materials such as metallopolymers. We herein present the synthesis and the electrochemical and photophysical characterisation of these Cu(I) complexes, in combination with ab initio calculations. The complexes present a bright cyan emission (λem ~ 505 nm) in their solid state, both as powder and as blends in a polymer matrix. The successful synthesis of metallopolymers embedding two of the novel complexes is shown. These copolymers were also found to be luminescent and their photophysical properties were compared to those of their polymer blends. The chemical nature of the polymer backbone contributes significantly to the photoluminescence quantum yield, paving a route for the strategic design of novel luminescent Cu(I)-based polymeric materials.

Cross-Coupled Phenyl- and Alkynyl-Based Phenanthrolines and Their Effect on the Photophysical and Electrochemical Properties of Heteroleptic Cu(I) Photosensitizers

With the aims of increasing the antenna system and improving the photophysical properties of Cu(I)-based photosensitizers, the backbone of 2,9-dimethyl-1,10-phenanthroline was selectively extended in the 5,6-position. Applying specifically tailored Suzuki-Miyaura and "chemistry-on-the-complex" Sonogashira cross-coupling reactions enabled the development of two sets of structurally related diimine ligands with a broad variety of different phenyl- and alkynyl-based substituents. The resulting 11 novel heteroleptic Cu(I) complexes, including five solid-state structures, were studied with respect to their structure-property relationships. Both sets of substituents are able to red-shift the absorption maxima and to increase the absorptivity. For the alkynyl-based complexes, this is accompanied by a significant anodic shift of the reduction potentials. The phenyl-based substituents strongly influence the emission wavelength and quantum yield of the resulting Cu(I) complexes and lead to an increase in the emission lifetime of up to 504 ns, which clearly indicates competition with the benchmark system [(xantphos)Cu(bathocuproine)]PF₆.

Structure and excited-state dynamics of dimeric copper(i) photosensitizers investigated by time-resolved X-ray and optical transient absorption spectroscopy

Time-resolved X-ray (tr-XAS) and optical transient absorption (OTA) spectroscopy in the picosecond time scale coupled with Density Functional theory (DFT) and X-ray absorption near-edge structure (XANES) calculations are applied to study three homoleptic Cu(i) dimeric chromophores with ethyl and longer propyl spacers, denoted as [Cu₂(mphenet)₂]Cl₂ (C1), [Cu₂(mphenet)₂](ClO₄)₂ (C2) and [Cu₂(mphenpr)₂](ClO₄)₂ (C3) (where mphenet = 1,2-bis(9-methyl-1,10-phenanthrolin-2-yl)ethane and mphenpr = 1,3-bis(9-methyl-1,10-phenanthrolin-2-yl)propane). Tr-XAS analysis after light illumination at ∼ 100 ps illustrate the formation of a flattened triplet excited state in all 3 complexes. Optical transient absorption (OTA) analysis for C1 monitored in water and C2 and C3 measured in acetonitrile reveals distinct excited-state lifetimes of 169 ps, 670 ps and 1600 ps respectively. These differences are associated to changes in the solvent (comparing C1 and C2) and the flexibility of the ligand to adapt after Cu flattening upon excitation (C2 and C3). Our results are important for the improved structural dynamics of these types of Cu-based dimeric compounds, and can guide the integration of these chromophores into more complex solar energy conversion schemes.

Desymmetrizing Heteroleptic [Cu(P^P)(N^N)][PF6] Compounds: Effects on Structural and Photophysical Properties, and Solution Dynamic Behavior

The preparation, characterization and electrochemical and photophysical properties of a series of desymmetrized heteroleptic [Cu(P^P)(N^N)][PF₆] compounds are reported. The complexes incorporate the chelating P^P ligands bis(2-(diphenylphosphanyl)phenyl)ether (POP) and (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane) (xantphos), and 6-substituted 2,2′-bipyridine (bpy) derivatives with functional groups attached by –(CH₂)_n– spacers: 6-(2,2′-bipyridin-6-yl)hexanoic acid (1), 6-(5-phenylpentyl)-2,2′-bipyridine (2) and 6-[2-(4-phenyl-1H-1,2,3,triazol-1-yl)ethyl]-2,2′-bipyridine (3). [Cu(POP)(1)][PF₆], [Cu(xantphos)(1)][PF₆], [Cu(POP)(2)][PF₆], [Cu(xantphos)(2)][PF₆], and [Cu(xantphos)(3)][PF₆] have been characterized in solution using multinuclear NMR spectroscopy, and the single crystal structure of [Cu(xantphos)(3)][PF₆]^.0.5Et₂O was determined. The conformation of the 6-[2-(4-phenyl-1H-1,2,3,triazol-1-yl)ethyl]-substituent in the [Cu(xantphos)(3)]⁺ cation is such that the α- and β-CH₂ units reside in the xanthene ‘bowl’ of the xantphos ligand. The 6-substituent desymmetrizes the structure of the [Cu(P^P)(N^N)]⁺ cation and this has consequences for the interpretation of the solution NMR spectra of the five complexes. The NOESY spectra and EXSY cross-peaks provide insight into the dynamic processes operating in the different compounds. For powdered samples, emission maxima are in the range 542–555 nm and photoluminescence quantum yields (PLQYs) lie in the range 13–28%, and a comparison of PLQYs and decay lifetimes with those of [Cu(xantphos)(6-Mebpy)][PF₆] indicate that the introduction of the 6-substituent is not detrimental in terms of the photophysical properties.

Multidentate Phenanthroline Ligands Containing Additional Donor Moieties and Their Resulting Cu(I) and Ru(II) Photosensitizers: A Comparative Study

To bind or not to bind: Driven by the motivation to increase the (photo)stability of traditional Cu(I) photosensitizers, multidentate diimine ligands, which contain two additional donor sites, were designed. To this end, a systematic series of four 1,10-phenanthroline ligands with either OR or SR (R = ⁱPr or Ph) donor groups at the 2 and 9 positions and their resulting hetero- and homoleptic Cu(I) complexes were prepared. In addition, the related Ru(II) complexes were also synthesized to study the effect of another metal center. In the following, a combination of NMR spectroscopy and X-ray analysis was used to evaluate the impact of the additional donor moieties on the coordination behavior. Most remarkably, for the homoleptic bis(diimine)copper(I) complexes, a pentacoordinated copper center, corresponding to a (4 + 1)-fold coordination mode, was found in the solid state. This additional binding is the first indication that the extra donor might also occupy a free coordination site in the excited-state complex, modifying the nature of the excited states and their respective deactivation processes. Therefore, the electrochemical and photophysical properties of all novel complexes (in total 13) were studied in detail to assess the potential of these photosensitizers for future applications within solar energy conversion schemes. Finally, the photostabilities and a potential degradation mechanism were analyzed for representative samples.

Molecular-Level Insight of Cu(I) Complexes with the 7,8-Bis(diphenylphosphino)-7,8-dicarba-nido-undecaborate Ligand as a Thermally Activated Delayed Fluorescence Emitter: Luminescent Mechanism and Design Strategy

Investigation of the clear structure-property relationship and microscopic mechanism of thermally activated delayed fluorescence (TADF) emitters with high emission quantum yield is a direction worthy of continuous efforts. The instructive theoretical principle of TADF material design is critical and challenging. Here, we carried out theoretical calculation on two experimental Cu(I) complexes with the same 7,8-bis(diphenylphosphino)-7,8-dicarba-nido-undecaborate (dppnc) but different N^N ligands [dmbpy = 6,6'-dimethyl-2,2'-bipyridine (1) or dmp = 2,9-dimethyl-1,10-phenanthroline (2)] to briefly elaborate the structure-TADF performance relationship and luminescence mechanism. It was found that enhanced rigidity by the fused benzene ring between two pyridyl units in complex 2 leads to (i) higher allowedness of S₁ → S₀, (ii) more effective reverse intersystem crossing (RISC), and (iii) better relative stability of the T₁ state, which could be responsible for its excellent TADF behavior. Thus, a strategy of extending π conjugation in the N^N ligand could be deduced to further enhance the quantum yield. We validated it and have succeeded in designing analogue complex 4 by extending π conjugation with an electron-withdrawing pyrazinyl. Benefiting from the smaller energy gap (ΔE_ST) and plunged reorganization energy between the S₁ and T₁ states, the rate of RISC in complex 4 (1.05 × 10⁸ s^-1) increased 2 orders of magnitude relative to that of 2 (5.80 × 10⁶ s^-1), showing more superiority of the TADF behavior through a better balance of RISC, fluorescence, and phosphorescence decay. Meanwhile, the thermally activated temperature of 4 is only 165 K, implying that there is a low-energy barrier. All of these indicate that the designed complex 4 may be a potential TADF candidate.